Search Results

Search found 4062 results on 163 pages for 'secure government ficam sicam'.

Page 132/163 | < Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >

  • apache on Cent OS opening default page on https

    - by Asghar
    I am new to apache and SSL and configuration, i got verysign certificte to secure my site. i have public, private and ca_intermediate cert files. i have configured ssl.conf as below VirtualHost _default_:443> DocumentRoot /var/www/mydomain.com/web/ ServerName mydomain.com:443 ServerAlias www.mydomain.com # Use separate log files for the SSL virtual host; note that LogLevel # is not inherited from httpd.conf. ErrorLog logs/ssl_error_log TransferLog logs/ssl_access_log LogLevel warn # SSL Engine Switch: # Enable/Disable SSL for this virtual host. SSLEngine on problem is that when i access www.mydoamin.com with "HTTP" it works fine, but when i access using "HTTPS" it just opens apache default page. but with green "HTTPS" means my certificates are installed correctly. How can i get rid of this situtaion. Thanks EDIT Output of apachectl -S -bash-3.2# apachectl -S [Mon Aug 27 10:20:19 2012] [warn] NameVirtualHost 82.56.29.189:80 has no VirtualHosts [Mon Aug 27 10:20:19 2012] [warn] NameVirtualHost 82.56.29.189:443 has no VirtualHosts VirtualHost configuration: wildcard NameVirtualHosts and _default_ servers: _default_:8081 localhost.localdomain (/etc/httpd/conf/sites-enabled/000-apps.vhost:10) *:8080 is a NameVirtualHost default server localhost.localdomain (/etc/httpd/conf/sites-enabled/000-ispconfig.vhost:10) port 8080 namevhost localhost.localdomain (/etc/httpd/conf/sites-enabled/000-ispconfig.vhost:10) *:443 is a NameVirtualHost default server mydomain.com (/etc/httpd/conf.d/ssl.conf:81) port 443 namevhost mydomain.com (/etc/httpd/conf.d/ssl.conf:81) *:80 is a NameVirtualHost default server app.mydomain.com (/etc/httpd/conf/sites-enabled/100-app.mydomain.com.vhost:7) port 80 namevhost app.mydomain.com (/etc/httpd/conf/sites-enabled/100-app.mydomain.com.vhost:7) port 80 namevhost mydomain.com (/etc/httpd/conf/sites-enabled/100-mydomain.com.vhost:7) Syntax OK

    Read the article

  • Immediate logout after login with PAM, Kerberos, and LDAP

    - by Dylan Klomparens
    I've set up remote login on a computer using Kerberos and LDAP. I've also configured NFS to mount onto /home so that the user's home directory is the same wherever they login. Kerberos authentication seems to work fine. I can get a ticket using kinit user1 (assuming user1 is a remote user) and see the ticket with klist. I'm pretty sure LDAP is working because I see the proper output from getent passwd, which lists all the remote users. The contents of /home are present when I list the files. The problem is: when I try to login as a remote user the session is immediately ended. Why is it not letting me stay logged in? Here is the output from /var/log/messages after a login attempt: # /var/log/messages: Oct 9 10:57:53 tophat login[6472]: pam_krb5[6472]: authentication succeeds for 'user1' ([email protected]) Oct 9 10:57:53 tophat login[6472]: pam_krb5[6472]: pam_setcred (establish credential) called Oct 9 10:57:53 tophat login[6472]: pam_krb5[6472]: pam_setcred (delete credential) called EDIT: The distro is openSUSE. Here are the common-* files in /etc/pam.d:   # /etc/pam.d/common-account account required pam_unix.so   # /etc/pam.d/common-auth auth sufficient pam_krb5.so minimum_uid=1000 auth required pam_unix.so nullok_secure try_first_pass   # /etc/pam.d/common-session session optional pam_umask.so umask=002 session sufficient pam_krb5.so minimum_uid=1000 session required pam_unix.so There doesn't appear to be a /var/log/auth.log file nor a /var/log/secure file.

    Read the article

  • Running $ORIGIN linked binaries from setuid scripts on linux

    - by drscroogemcduck
    I'm using suidperl to run some programs that require root permissions. however, the runtime linker won't expand library paths which contain $ORIGIN entries so the programs i want to run (jstack from java) won't run. more info here There is one exception to the advice to make heavy use of $ORIGIN. The runtime linker will not expand tokens like $ORIGIN for secure (setuid) applications. This should not be a problem in the vast majority of cases. my program looks something like this: #!/usr/bin/perl $ENV{PATH} = "/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/java/jdk1.6.0_12/bin:/root/bin"; $ENV{JAVA_HOME} = "/usr/java/jdk1.6.0_12"; open(FILE, '/var/run/kil.pid'); $pid = <FILE>; close(FILE); chomp($pid); if ($pid =~ /^(\d+)/) { $pid = $1; } else { die 'nopid'; } system( "/usr/java/jdk1.6.0_12/bin/jstack", "$pid"); is there any way to fork off a child process in a way so that the linker will work correctly.

    Read the article

  • Having Trouble Ripping Some CD's

    - by James
    Hi, When I buy CD's I tend to rip them to FLAC right away. When ripping I use Foobar2000 or Exact Audio Copy and enable secure ripping which uses error correction. Recently I bought a 2 CD compilation album brand new but when I tried to rip the second CD on my laptop using Foobar2000 it struggled with the last 2 tracks and was unable to finish. EAC was also unable to get an accurate rip and reports read errors. Ripping in fast mode results in audible errors in the output track. I have tried another computer and having similar problems. I cannot see any damage to the disc and it has not been dropped or anything. The weird thing is that I had similar problems with a different album and different PC a while back. This other CD was a compilation disk so it was also right up to the CD capacity limit and again it was the last few tracks that would not rip. Dozens of other discs have ripped fine So I am wondering if the CD is simply defective, or whether it is something else. How common are defective CD's? Do some CD drives struggle with CD's of this capacity? Or Is this some kind of copy protection? I'm thinking of asking Amazon for a replacement but it would be annoying if I get the same problem again.

    Read the article

  • Additional Security Measures for Syslog over SSH

    - by Eric
    I'm currently working on setting up some secure syslog connections between a few Fedora servers. This is my currently setup 192.168.56.110 (syslog-server) <---- 192.168.57.110 (syslog-agent) From the agent, I am running this command: ssh -fnNTx -L 1514:127.0.0.1:514 [email protected] This works just fine. I have rsyslog on the syslog-agent pointing to @@127.0.0.1:1514 and it forwards everything to the server correctly on port 514 via the tunnel. My issue is, I want to be able to lock this down. I am going to use ssh keys so this is automated because there will be multiple agents talking to the server. Here are my concerns. Someone getting on the syslog-agent and logging into the server directly. I have taken care of this by ensuring that syslog_user has a shell of /sbin/nologin so that user can't get a shell at all. I don't want someone to be able to tunnel another port over ssh. Ex. - 6666:127.0.0.1:21. I know my first line of defense against this is to just not have anything listening on those ports and it's not an issue. However I want to be able to lock this down somehow. Are there any sshd_config settings on the server that I can use to make it where only port 514 can be tunneled over ssh? Are there any other major security concerns I'm overlooking at this point? Thanks in advance for your help/comments.

    Read the article

  • IIS 6 ASP.NET default handler-mappings and virtual directories

    - by Mark Lauter
    I'm having a problem with setting a default mapping in IIS 6. I want to secure *.HTML files with ASP.NET forms authentication. The problem seems to have something to do with using virtual directories to hold the html files. Here's how it's setup: sample directory tree c:/inetpub/ (nothing in here) d:/web_files/my_web_apps d:/web_files/my_web_apps/app1/ d:/web_files/my_web_apps/app2/ d:/web_files/my_web_apps/html_files/ app1 and app2 both access the same html_files directory, so html_files is set as a virtual directory in the web apps in IIS... sample web directory tree //app1/html_files/ (points to physical directory: d:/web_files/my_web_apps/html_files/) //app2/html_files/ (points to physical directory: d:/web_files/my_web_apps/html_files/) If I put a file called test.html in the root of //app1/ and then add the default mapping to the asp.net dll and setup my security on the root folder with deny="?", then accessing test.html works exactly as expected. If I'm not authenticated, it takes me to the login.aspx page, and if I am authenticated then it displays test.html. If I put the test.html file in the html_files directory I get a totally different behavior. Now the login.aspx page loads and I stuck some code in to check if I was still authenticated: <p>autheticated: <%=User.Identity.IsAuthenticated%></p> I figured it would say false because why else would it bother to load the login page? Nope, it says true - so it knows i'm authenticated, but it won't give me access to the test.html file. I've spent several hours on this and haven't been able to solve it. I'm going to spend some more time on google to see if I've missed something. Fingers crossed.

    Read the article

  • Can any iSCSI NAS appliance replicate / clone a LUN to an external drive?

    - by Boden
    I would like to backup using Windows Imaging to some kind of NAS appliance. I believe this will require the NAS to support iSCSI. I would then like the appliance to support the replication of the iSCSI LUN to an external eSATA or USB disk connected directly to the appliance. I've found plenty of NAS appliances that can do iSCSI and replicate to an external drive, but none that I've found thus far can do both at once. That is, the devices can do iSCSI, but then the replication feature doesn't work. The idea here is to backup to an appliance located in a secure office far away from the server room. Offsite backups to external hard drive could be managed from the appliance. The benefits of such a setup would be: 1) very unlikely that fire or random theft would affect both server-room backup and "remote" backup appliance 2) offsite backups could be managed by multiple trusted people without granting access to server room 3) Windows imaging provides poor man's deduplication, so each backup volume can contain a decent backup history. I understand why this would be a non-trivial thing to implement, but I'm wondering if such a thing exists? Preferably a tabletop, low to medium cost device. Alternative solutions welcome. NOTE: I'm backing up very few but very large files, so file replication is not a good option.

    Read the article

  • SSL Connection Error

    - by toffee.beanns
    I have purchased a comodo ssl cert and have submitted the Certificate Signing Request (CSR) generated by my server to the ssl management site. With the 3 files it returned me with, - AddTrustExternalCARoot.crt - PositiveSSLCA2.crt - www_mydomainname_com.crt I have uploaded them to my /etc/ssl/ssl-certs folder and have updated my virtual host in my sites-available and restarted accordingly. NameVirtualHost 107.167.120.195:80 #sample ip address NameVirtualHost 107.167.120.195:443 #sample ip address ......... #normal http virtual host (working well) <VirtualHost 107.167.120.195:443> ServerAdmin [email protected] ServerName mydomainname.com ServerAlias www.mydomainname.com DocumentRoot /var/www/mydomainname SSLEngine on SSLCertificateFile /etc/ssl/ssl-certs/www_mydomainname.com.crt SSLCertificateKeyFile /etc/ssl/ssl-certs/server.key SSLCertificateChainFile /etc/ssl/ssl-certs/PositiveSSLCA2.crt </VirtualHost> I have also enabled ran 'a2enmod ssl' and it's enabled. This is the error I get when I access the webpage https in chrome: SSL connection error Error code: ERR_SSL_PROTOCOL_ERROR Unable to make a secure connection to the server. This may be a problem with the server, or it may be requiring a client authentication certificate that you don't have. I have also checked out my apache log files and there seems to be an error saying that the Common Name (CN) is not the same as the server. RSA server certificate CommonName (CN) `www.mydomainname.com' does NOT match server name!? and Invalid method in request \x16\x03\x01 What should I do?

    Read the article

  • Windows: disable remote access of local drive, even by domain admin

    - by Matt
    We have a network of Windows 7 PCs that are managed as part of a domain. What we want is for the domain admin to be unable to view the PC's local drive (C:) unless he is physically at the PC. In other words, no remote desktop and no ability to use UNC. In other words, the domain admin should not be allowed to put \\user_pc\c$ in Windows Explorer and see all the files on that computer, unless he is physically present at the PC itself. Edit: to clarify some of the questions/comments that have come up. Yes, I am an admin---but a complete Windows novice. And yes, for the sake of this and my similar questions, it is fair to assume that I am working for someone who is paranoid. I understand the arguments about this being a "social problem versus a technical problem", and "you should be able to trust your admins", etc. But this is the situation in which I find myself. I'm basically new to Windows system administration, but am tasked with creating an environment that is secure by the company owner's definition---and this definition is clearly very different from what most people expect. In short, I understand that this is an unusual request. But I'm hoping there is enough expertise in the ServerFault community to point me in the right direction.

    Read the article

  • Execute remote shell commands on windows XP embedded

    - by BartD
    The following situation: We have Windows XP Embedded clients that have all admin shares disabled and only have read-only shares (for security reasons). What we want to do is run remote shell (dos) commands on these machines. At first we looked at PsExec & BeyondExec applications (and all sorts of variants), but all of them rely on having at least an admin$ share, which are disabled on our systems. Telnet is not secure enough, as is RSHD servers. So we looked at the next obvious solution: and SSH server. We also prefer an open-source or freeware solution that is still maintained. I looked at freeSSH server for Windows, but that didn't run stable, I tried installing copSSH, WinSSH & openSSH for Windows, but none of these applications seem to work on Windows XP Embedded. The services can either not be installed or cannot be started. I don't know why. Some kind of dependency that is missing. So are there any other solutions out there? I don't care about having to an agent installation locally of some kind on each system, as long as the size of the software is small enough. Can someone suggest some alternatives to what I've already mentioned? Thank you very much.

    Read the article

  • Running $ORIGIN linked binaries from setuid scripts on linux

    - by drscroogemcduck
    I'm using suidperl to run some programs that require root permissions. however, the runtime linker won't expand library paths which contain $ORIGIN entries so the programs i want to run (jstack from java) won't run. more info here There is one exception to the advice to make heavy use of $ORIGIN. The runtime linker will not expand tokens like $ORIGIN for secure (setuid) applications. This should not be a problem in the vast majority of cases. my program looks something like this: #!/usr/bin/perl $ENV{PATH} = "/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/java/jdk1.6.0_12/bin:/root/bin"; $ENV{JAVA_HOME} = "/usr/java/jdk1.6.0_12"; open(FILE, '/var/run/kil.pid'); $pid = <FILE>; close(FILE); chomp($pid); if ($pid =~ /^(\d+)/) { $pid = $1; } else { die 'nopid'; } system( "/usr/java/jdk1.6.0_12/bin/jstack", "$pid"); is there any way to fork off a child process in a way so that the linker will work correctly.

    Read the article

  • VPN on a ubuntu server limited to certain ips

    - by Hultner
    I got an server running Ubuntu Server 9.10 and I need access to it and other parts of my network sometimes when not at home. There's two places I need to access the VPN from. One of the places to an static IP and the other got an dynamic but with DynDNS setup so I can always get the current IP if I want to. Now when it comes to servers people call me kinda paranoid but security is always my number one priority and I never like to allow access to the server outside the network therefor I have two things I have to have on this VPN. One it shouldn't be accessiable from any other IP then these 2 and two it has to use a very secure key so it will be virtually impossible to bruteforce even from the said IP´s. I have no experience what so ever in setting up VPNs, I have used SSH tunneling but never an actuall VPN. So what would be the best, most stable, safest and performance effiecent way to set this up on a Ubuntu Server? Is it possible or should I just set up some kind of SSH Tunnel instead? Thanks on beforehand for answers.

    Read the article

  • Centos iptables configuration for Wordpress and Gmail smtp

    - by Fabrizio
    Let me start off by saying that I'm a Centos newby, so all info, links and suggestions are very welcome! I recently set up a hosted server with Centos 6 and configured it as a webserver. The websites running on it are nothing special, just some low traffic projects. I tried to configure the server as default as possible, but I like it to be secure as well (no ftp, custom ssh port). Getting my Wordpress to run as desired, I'm running into some connection problems. 2 things are not working: installing plugins and updates through ssh2 (failed to connect to localhost:sshportnumber) sending emails from my site using the Gmail smtp (Failed to connect to server: Permission denied (13)) I have the feeling that these are both related to the iptables configuration, because I've tried everything else (I think). I tried opening up the firewall to accept traffic for ports 465 (gmail smtp) and ssh port (lets say this port is 8000), but both the issues remain. Ssh connections from the terminal are working fine though. After each change I tried implementing I restarted the iptables service. This is my iptables configuration (using vim): # Generated by iptables-save v1.4.7 on Sun Jun 1 13:20:20 2014 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m tcp --dport 8000 -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m tcp --dport 465 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited -A OUTPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A OUTPUT -o lo -j ACCEPT -A OUTPUT -p tcp -m tcp --dport 8000 -j ACCEPT -A OUTPUT -p tcp -m tcp --dport 465 -j ACCEPT COMMIT # Completed on Sun Jun 1 13:20:20 2014 Are there any (obvious) issues with my iptables setup considering the above mentioned issues? Saying that the firewall is doing exactly nothing in this state is also an answer... And again, if you have any other suggestions for me to increase security (considering the basic things I do with this box), I would love hear it, also the obvious ones! Thanks!

    Read the article

  • Software to monitor bill payment to mission critical IT service providers (ISP, DNS etc.)

    - by Sholom
    Hi All, The Problem: Our very likable but absent minded bookkeeper keeps neglecting to pay our IT vendors on time. Just this past week our internet service was disconnected. Same could happen to many other mission critical accounts (domain registrar, backup MX, anti-virus license, HackerSafe (McAfee secure) service and even an 800 number to name a few). As the sysadmin, i monitor my severs to make sure they are plugged into the power-outlet. I believe i should also monitor my services to make sure they are plugged in to their money-outlet. To compound the problem, when the power goes out someone else will likely notice and notify me. But if a bill is not payed, no one will ever notice until service is lost. Lost as in losing our domain name which would cause a lot more damage then the power failing on our server. [Solution] = [Doesn't work because]: Retrain the bookkeeper = Wishful thinking. Notify my manager = Already have (via email). Protects me, does not solve problem. Fire bookkeeper = What makes you so sure the next one will never forget? Bottom line: Humans are humans and sooner or later something critical will be royally messed up. We need to partner with a machine to help us out here. Anybody have the same problem? What software/solution do you use? I would like software that emails me when a bill is passed due just like i get an email when the power outlet fails. Anyone hear of anything like that? Thanks

    Read the article

  • squid bypass for a domain

    - by krisdigitx
    i am using squid with adzap, it possible that squid/adzap does not cache for a particluar domain eg. cnn.com this is my squid.conf file # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 #acl localhost src ::1/128 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 #acl to_localhost dst ::1/128 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl localnet src 192.168.1.0/24 acl localnet src 192.168.2.0/24 acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost http_access deny manager # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user #http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localnet http_access allow localhost # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port xxx.xxx.xxx.yyy:3128 transparent visible_hostname proxyserver.local # We recommend you to use at least the following line. hierarchy_stoplist cgi-bin ? # Uncomment and adjust the following to add a disk cache directory. cache_dir ufs /var/spool/squid 1024 16 256 # Leave coredumps in the first cache dir coredump_dir /var/spool/squid # Add any of your own refresh_pattern entries above these. refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 access_log /var/log/squid/squid.log squid access_log syslog squid redirect_program /usr/local/adzap/scripts/wrapzap fixed using acl allow_domains dstdomain www.cnn.com always_direct allow allow_domains

    Read the article

  • Samba Does Not List Files In Shared Directory

    - by Sean M
    I am running Samba on a CentOS server, and I am experiencing a problem where it allows me to connect to the server and see a share, but shows the share as an empty directory. I find this behavior strange. Here is the stanza in my smb.conf for the given share: [seanm] path = /home/seanm writeable = yes valid users = seanm, root read only = No Here's what I see on the server side: [seanm@server ~]$ ls -l -rw-r--r-- 1 seanm seanm 40 Jan 4 13:45 pangram.txt And yet: [seanm@client ~]$ smbclient //server/seanm -U seanm -W WORKGROUP Enter seanm's password: Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.33-3.29.el5_5.1] smb: \> ls . D 0 Fri Jan 7 10:08:55 2011 .. D 0 Fri Jan 7 07:58:31 2011 58994 blocks of size 262144. 50356 blocks available This behavior is present on both a Windows client and a Linux client system. The behavior is present with the firewall on and with the firewall off, so it's not that. Neither /var/log/messages nor /var/log/secure have any complaints about Samba. I doubt that SELinux is a problem: just in case, here are the relevant settings. [root@server ~]# getsebool -a | grep samba samba_domain_controller --> off samba_enable_home_dirs --> on samba_export_all_ro --> off samba_export_all_rw --> off samba_share_fusefs --> off samba_share_nfs --> off use_samba_home_dirs --> on virt_use_samba --> off What am I doing wrong here, and what can I do to fix it?

    Read the article

  • Exchange 2010 sends out spam.

    - by Magnus Gladh
    Hi. I have an Exchange Server 2010, that uses a smart host to send out mails. A day ago the owner of smart host contact us and told us that we send out spam. I have try different open relay test on the net and all of them come back saying that this server is secured and can not be used as relay server. But I can see in my Exchange Queue Viewer that it keeps coming in new messages. Here is an example of how it looks. Identity: mailserver\3874\13128 Subject: Olevererbart:: [email protected] Pfizer -75% now Internet Message ID: <[email protected]> From Address: <> Status: Ready Size (KB): 6 Message Source Name: DSN Source IP: 255.255.255.255 SCL: -1 Date Received: 2010-12-09 21:46:22 Expiration Time: 2010-12-11 21:46:22 Last Error: Queue ID: mailserver\3874 Recipients: [email protected] How can I secure our exchange server more, to stop this from happening? Could I have got an virus that hooks up to our exchange server and send mail throw that? As I can see the From Address is always <, is there someway that I can stop sending mails that don't have a from address that I describe? Pleas help

    Read the article

  • Ubuntu networking issue: two specific machines cannot browse web while connected to network at the same time.

    - by jensendarren
    I have setup a secure wireless network which works very well except for two laptops running Ubuntu 10.10 that can't access the Internet via a browser at the same time. They can both ping sites, wget sites, use skype but when using a browser the page never loads (in Firefox the status bar just sits there saying "Connecting" until it times out.) Here is what we have tried so far (nothing has fixed this issue): OpenDNS Restart networking services Using wired connection rather than wireless Removing all other nodes from the network except the two machines that have this issue Swapped out the router Factory reset the router Reformatted one of the machines and re-installed Ubuntu 10.10 Other things that we have checked: The two machines can connect simultaneously without any issues to other wireless networks in different locations (say in an Internet Cafe or another office) The two machines have unique IP addresses The two machines have unique MAC addresses The two machines can communicate on the network using Skype, wget, ping etc We are not using a proxy on either machine FYI: I have attached output from wireshark. For the test we turned both machines on and pointed them both to the same website. The content loaded on one and not the other. Here is the output from wireshark- (speedyshare.com/files/26228631/machine_output_1 && speedyshare.com/files/26228649/machine2). As you can see the first one worked, the second one didn't. I don't fully understand the output and would appreciate if someone could shed some light on what might be causing this and how we can fix it! Many thanks! Darren

    Read the article

  • Why would I need a firewall if my server is well configured?

    - by Aitch
    I admin a handful of cloud-based (VPS) servers for the company I work for. The servers are minimal ubuntu installs that run bits of LAMP stacks / inbound data collection (rsync). The data is large but not personal, financial or anything like that (ie not that interesting) Clearly on here people are forever asking about configuring firewalls and such like. I use a bunch of approaches to secure the servers, for example (but not restricted to) ssh on non standard ports; no password typing, only known ssh keys from known ips for login etc https, and restricted shells (rssh) generally only from known keys/ips servers are minimal, up to date and patched regularly use things like rkhunter, cfengine, lynis denyhosts etc for monitoring I have extensive experience of unix sys admin. I'm confident I know what I'm doing in my setups. I configure /etc files. I have never felt a compelling need to install stuff like firewalls: iptables etc. Put aside for a moment the issues of physical security of the VPS. Q? I can't decide whether I am being naive or the incremental protection a fw might offer is worth the effort of learning / installing and the additional complexity (packages, config files, possible support etc) on the servers. To date (touch wood) I've never had any problems with security but I am not complacent about it either.

    Read the article

  • Encrypting peer-to-peer application with iptables and stunnel

    - by Jonathan Oliver
    I'm running legacy applications in which I do not have access to the source code. These components talk to each other using plaintext on a particular port. I would like to be able to secure the communications between the two or more nodes using something like stunnel to facilitate peer-to-peer communication rather than using a more traditional (and centralized) VPN package like OpenVPN, etc. Ideally, the traffic flow would go like this: app@hostA:1234 tries to open a TCP connection to app@hostB:1234. iptables captures and redirects the traffic on port 1234 to stunnel running on hostA at port 5678. stunnel@hostA negotiates and establishes a connection with stunnel@hostB:4567. stunnel@hostB forwards any decrypted traffic to app@hostB:1234. In essence, I'm trying to set this up to where any outbound traffic (generated on the local machine) to port N forwards through stunnel to port N+1, and the receiving side receives on port N+1, decrypts, and forwards to the local application at port N. I'm not particularly concerned about losing the hostA origin IP address/machine identity when stunnel@hostB forwards to app@hostB because the communications payload contains identifying information. The other trick in this is that normally with stunnel you have a client/server architecture. But this application is much more P2P because nodes can come and go dynamically and hard-coding some kind of "connection = hostN:port" in the stunnel configuration won't work.

    Read the article

  • Someone used or hacked my computer to commit a crime? what defense do I have?

    - by srguws
    Hello, I need IMMEDIATE Help on a computer crime that I was arrested for. It may involve my computer, my ip, and my ex-girlfriend being the true criminal. The police do not tell you much they are very vague. I was charged though! So my questions are: -If someone did use my computer at my house and business and post a rude craigslist ad about a friend of my girlfriend at the time from a fake email address, how can I be the ONLY one as a suspect. Also how can I be charged. I noticed the last few days there are many ways to use other peoples computers, connections, etc. Here are a few things I found: You can steal or illegally use an ip addresss or mac address. Dynamic Ip is less secure and more vulnerable than static. People can sidejack and spoof your Mac, Ip, etc. There is another thing called arp spoofing. I am sure this is more things, but how can I prove that this happened to me or didnt happen to me. -The police contacted Craigslist, the victim, aol, and the two isp companies. They say they traced the IP's to my business and my home. My ex was who I lived with and had a business with has access to the computers and the keys to bothe buildings. My brother also lives and works with me. My business has many teenagers who use the computer and wifi. My brother is a college kid and also has friends over the house and they use the computer freely. So how can they say it was me because of an angry ex girlfriend.

    Read the article

  • Privacy, VPN and routers

    - by user123189
    Ever since this ACTA push-up the things are starting to heat up around torrents and privacy. I am using Tribler now, but this is not secure enough for me. Not enough privacy. I've been using in the past a swedish VPN PPTP connection. What I observed is that, when the VPN connection was down, Internet traffic wasn't cut off, rather the downloads were continuing, this time with my real IP, wearing off my protection. 1st : How to enforce a VPN connection that will cut all traffic when down? That is, the moment the connection is down, all internet traffic should cease as if I'd pull the network plug out. 2nd: Is PPTP good enough or should I ask for SSTP or IKEV2 ? 3rd: Should I disable IPv6 ? Is VPN no longer private if I keep IPv6 active? I 'heard some stuff' about dual vpn routers to be able to improve privacy; but nothing more about how to configure one for such a task. 4th: Is there any kind of "black box" hardware equipment that can be used in hiding IP, encrypting traffic and so on ?

    Read the article

  • Internet Problem: Wireless connected but no connection to internet

    - by Josh K
    Hey i have a interesting network setup on a laptop here and for some reason the internet isnt working. I am connected to a secure network via wireless router and taskbar says i am connected and with good signal strength but in my internet browser i cant connect to any websites, the error is: This webpage is not available. (Chrome) I am using Chrome, but websites dont work on IE either. Heres a little background on the setup i have. I have a Ethernet connected to the laptop with a static ip, and then i have the wireless setup with DHCP enabled. I am using the ethernet to connect to the network (for remote desktop) but the wireless for internet (to avoid the network firewalls). this set up has worked fine for a few months, but i cant figure out what is going on now. Might be worth it to note it is a Lenovo Thinkpad and i just uninstalled ThinkVantage Access Connections (as it was giving me ample problems prior to this one, which i consider a step up) Tried repairing connection as well, let me know if you guys have any ideas please! EDIT: Solved-Dead Modem in the server room.... Sorry guys didn't have access to that myself

    Read the article

  • Strange RDP / Remote Desktop problem

    - by John Landheer
    I'll try to be as specific as I can be: Server is running SBS 2008 R2 (with all updates) Server is connected to the internet Server has 2 NIC's, one is disabled Server is running RDP Service (accessible directly from the internet, I know, not as secure as it should be) Computers A and B are on the same local net. Computers A and B are both Windows 7. Users X and Y are both admins on the server Computer A can connect as user X to the server with mstsc Computer A can connect as user Y to the server with mstsc Computer B can connect as user X to the server with mstsc Computer B CANNOT connect as user Y to the server with mstsc! Error that username/password is incorrect. The last point is the problem, I get an authentication error. This used to work flawlessly for the last year. The server and desktops have been rebooted. EDIT: I tried: prefixing domain to the username prefixing the server computer name to the username change the password copy/paste the password from notepad to make sure it was correct I find it very strange.... EDIT: The computers are not on the same subnet as the server. The server is at my hosting provider. All computers as all users can reach the web app that is running on the server.

    Read the article

  • Server 2008 R2 domain windows update strategy

    - by Joost Verdaasdonk
    Let me explain my question a bit. We are a small company that have now made the first move to a bigger network. For now the network contains of 5 servers 2008 R2 (dc,sql,web,etc..). Everything we need is now in place but for now we cannot afford to finish the network by implementing redundant systems. (secondary dc, dns, sql cluster, etc...) For some people this is hard to understand but this is the current situation. (and we are aware and will fix this when we can) Because we want to keep our system secure and up to date I've made sure that all systems are updated regularly. The problem is ofc that the nr of updates Microsoft rolls out that need a system reboot seam to occur more often. (maybe I'm wrong and it just feels like this) ;-) In our domain servers depend on each other for services (like SQL, WEB, or whatever) so just rebooting a server at will is NOT a good idea! For now I update all of them without rebooting at once. After all are up to date I bring them down in the order they are depended on each other. After this I reboot all of them in the inverse order. I understand ofc that if I DID have redundancy in my system that updating and rebooting would not be such a problem because the server task could be taken over by another node but this is something we generally need to add when we can. So my question is. If you read my above situation can you suggest me more Update strategies or general ideas that could help me do this process in a better / faster way? Thanks for your thoughts!

    Read the article

< Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >