Search Results

Search found 6229 results on 250 pages for 'stuck pixel'.

Page 132/250 | < Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >

• Can't access computer

  - by Pudica

  I'm running Ubuntu 14.04 on an Intel NUC and it won't boot! The last successful boot was earlier today but now each time I try it gets stuck on the Grub menu where it prompts for memory check etc. This is not a dual boot system, so this screen shouldn't ever appear, and it never has before. It's GRUB version 2.02~beta2-9, which is a little disconcerting, as I'm on the stable sources. Unfortunately the keyboard (I've tried 2 keyboards just in case) is not responding at this point in the boot process, so I can't select the "Ubuntu" menu option in Grub. The keyboard works during the bios stage, so I can configure it to boot from USB, and I tried a flash drive with 14.04 on it. The flash drive works in my laptop but is completely ignored by the NUC (I tried all 3 USB ports!). It seems that I have no way of getting into the machine at all! The Intel support site was my first option, but the site is down. I expect it's a long shot, but if anyone has any ideas I'd be very grateful.

  Read the article

• What online games would let me practice AI development?

  - by Myn

  I am working on a project experimenting with Artificial Intelligence design methodologies for online world avatars. Online world here is quite open to interpretation; Second Life is just as applicable as Counter Strike, for example. To carry out these experiments, I must first develop an intelligent agent for the world in question. However, I am honestly quite stuck as to which game I could use for this. My preference was to develop an intelligent "bot" to play an MMORPG, but the legal restrictions of such games prevent me. Likewise with most FPS games the use of an intelligent agent in place of a human player is considered cheating. The alternative, of course, is to create an NPC bot; an intelligent agent that populates the world alongside the player(s) rather than replacing a particular player. However, I'm struggling to find a game that would enable me to create an intelligent opponent either. I suppose the main requirements would be a game allows a third party program to use the function calls usually utilised by players and read feedback on the state of the world. Quake III and Unreal Tournament have been suggested before, but they have already been the subject of work on this research project. Short of writing my own online game from scratch, what games would allow me, through middleware, an API, or otherwise, to create either an artificially intelligent player or a bot?

  Read the article

• Best way to solve the game 'bricolage'

  - by maggie

  I am trying to solve the following game http://www.hacker.org/brick/ using some kind of AI. The target of this game is to finally clear the board by clicking on groups of at least 3 bricks of the same color and removing them. If a group is disappearing the remaining bricks above will fall down or be moved left if a column got no bricks left. The higher the level - more colors and larger board. I already guessed that a pure bruteforce approach wont scale nice for higher levels. So i tried to implement a monte carlo like approach which worked ok for the first levels. But i am still not confident i will make the maximum level of 1052 with this. Currently i am stuck @~ level 100 :) The finding of the solution takes too much time... Hoping that there is a better way to do this i read some stuff about neural networks but i am really at the beginning of this. Before becoming obsessed by ANNs i want to be sure it is the right way for my problem. So my question is: Does it make any sense to apply an ANN to this game? Any suggestions?

  Read the article

• Web Service Standard Complexity

  Are we over-standardizing web services and hindering their adoption? No, and in fact I feel that it is helping its adoption in the modern corporate world. Standards, although they can be daunting and tedious, provide a universal framework to which we all can operate in and around. These frameworks provide a common interface for all of to use when interaction with various computing environments so that data can be transfer freely.  Standards are protocols in which computers communicate with one another. If we take this to the living world, the united nations hires interprets for all each countries dignitaries so that they can understand what other countries are talking about. Imagine if the president of the United States wanted to talk to the ruler of China. How would these to communicate? The interpreter would translate data back and forth acting as in intermediary using both standard American English and Chinese. Without knowing the standards in either language no one would be able to communicate. Even though we work within the framework of standards does not mean that we are stuck with these standards. As technology evolves all standards will be out of touch, and when this occurs standards need to be refactored or replaced with new standards that are current with the technology at that time. How else are we as developers and the technology going to grow? What do you guys think?

  Read the article

• Ubuntu 11.04 64bits Keeps Randomly Freezing

  - by user971602

  This has been a real headache for me since the number of freezes has increase from twice a week to about 1 or twice a day. The system just halts and nothing can be done but hitting the restart button. At the beginning I thought it was related to Flash since I was getting random freezes when playing full screen flash videos online. I also thought it could be the wireless pci card. But the system has freezed using browsing around GNOME. The truth is, the freezes are really random and strange. I checked this thread Ubuntu keeps randomly freezing and try to ssh my computer using another one, but I could not ssh since it was really totally frozen. NumLock or CapsLock wasn't responding or blinking. Since I could not ssh I, also ignored this article https://wiki.ubuntu.com/X/Troubleshooting/Freeze According to my wife, the system has also halted under Win7 Pro 64bit but with less frequency. Here is my system configuration Intel Core i7 2600k ASRock Z68 Extreme3 gen3 Motherboard Crucial M4 128GB CT128M4SSD2 SSD WD Caviar Green WD10EADS 1TB SATA II G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR2 OCZ ModXStream 600W Power Supply Rosewill RNX-N300X PCI Wireless Adapter No external Graphics Card I remove the Wireless card and used Ethernet to see if the problem was the that, but I got a freeze after doing that. I also ran memtest86 and everything was ok. The only other thing I might suspect of is the SSD. I will try to clone the SSD to a HDD to see if that solve the problem. At this point I am stuck with the freezes. Do anyone have a clue of why this is happening and how can i solve this?

  Read the article

• My Kids and Ear Infection

  - by heshamelsaghir

  My Kids and Ear Infection is becoming a weekly issue.  That is why I wanted to start this blog to talk about my experience and more important hear from other parents opinions and experience. Well, I will start with my twins, they are about 3yrs old.  started to go to day care about three months ago.  since they started with the daycare, they started getting exposed to germs and viruses and the ear infection started too.  every few weeks they have ear infection.  They take turns or some times they both get ear infection at the same time.  To be more accurate, one of them is more suseptive to the ear infection.  We ended up going through the specialest that suggested an ear tube operation and also remove the adenoid tissue.  His opinion was that will stop the fluid from staying in his inner ear and will eleminate the ear infedction.  To make the long story short for now.  the ear infection never stoped.  in addtion to the ear infection, now the tube is stuck and stoped working, the tube is moved and going to fall, as the doctor said.  the problems do not stop.  they keep adding up.  and now my second son is going to need ear tube if he gets ear infection again.  what should I do?

  Read the article

• 3D Box Collision Data Import

  - by cboe

  I'm trying to implement a collision system using oriented bounding boxes, using a center for the box, it's extents as a 3D Vector and a rotation matrix, which is all stuff I picked up online and seem to be somewhat the standard. Detecting the center is no problem so I'm gonna leave these out here. My problem however is importing the data from a 3D file. Say I've placed a box with 2 units length on each side aligned to the world axis. The logic results here are extents of 1,1,1 and I use an identity matrix for rotation - easy. However I'm stuck when I rotate the box in the 3D program, say 30 degrees each axis. How would I parse the box? I only have these 8 vertices as information, and I guess what I would need to do is to find out the rotation of said box, apply it to the vertices so they are aligned to world axes and then calculate the extents out of that. How do I get the rotation of the box when I only have the vertex information of the box available?

  Read the article

• How to implement string matching based on a pattern

  - by Vincent Rischmann

  I was asked to build a tool that can identify if a string match a pattern. Example: {1:20} stuff t(x) {a,b,c} would match: 1 stuff tx a 20 stuff t c It is a sort of regex but with a different syntax Parentheses indicate an optional value {1:20} is a interval; I will have to check if the token is a number and if it is between 1 and 20 {a,b,c} is just an enumeration; it can be either a or b or c Right now I implemented this with a regex, and the interval stuff was a pain to do. On my own time I tried implementing some kind of matcher by hand, but it turns out it's not that easy to do. By experimenting I ended up with a function that generates a state table from the pattern and a state machine. It worked well until I tried to implement the optional value, and I got stuck and how to generate the state table. After that I searched how I could do this, and that led me to stuff like LL parser, LALR parser, recursive-descent parser, context-free grammars, etc. I never studied any of this so it's hard to know what is relevant here, but I think this is what I need: A grammar A parser which generates states from the grammar and a pattern A state machine to see if a string match the states So my first question is: Is this right ? And second question, what do you recommend I read/study to be able to implement this ?

  Read the article

• Audio not working in 12.10

  - by frampy

  I did a clean install of 12.10, when I open Sound Settings in gnome the only device in the list is "Dummy Output", and sound is not working. Sound worked fine out of the box in 12.04 I ran alsamixer, it says my card is "HDA Intel", and chip is "Realtek ALC880". The alsamixer playback output was set to mute at first, unmuting did not fix. I checked out the info at http://www.unixmen.com/2012003-howto-resolve-nosound-problem-on-ubuntu/ as suggested on a similar question, I've done everything there except installing the ubuntu audio dev team driver. Should I try install this? Edit: I've been reading the sound troubleshooting guide at https://help.ubuntu.com/community/SoundTroubleshooting It looks like Ubuntu is finding my audio device correctly. mike@wucade:~$ lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) Subsystem: Albatron Corp. Device 2668 Flags: bus master, fast devsel, latency 0, IRQ 40 Memory at d01c0000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel Still stuck as to why this isn't working.

  Read the article

• Best approach for tracking dependent state

  - by Pace

  Let's pretend I work on a project tracking application. The application is a database backed, server hosted, web application. In this application there are Projects which have many Activities which have many Tasks. A Task has two date fields an originalDueDate and a projectedDueDate. In addition, there are dynamic fields on the Activities and the Projects which indicate whether the Activity or Project is behind schedule based on the projected due dates of the child tasks and various other variables such as remaining buffer time, etc. There are a number of things that can cause the projectedDueDate to change. For example, an employee working on the project may (via a server request) enter in a shipping delay. Alternatively, a site may (via a server request) enter in an unexpected closure. When any of these things occur I need to not only update the projectedDueDate of the Task but also trigger the corresponding Project and Activity to update as well. What is the best way to do this? I've thought of the observer pattern but I don't keep a single copy of all these objects in memory. When a request comes in, I query the Task in from the database, at that point there is no associated Activity in memory that would be a listener. I could remove the ability to query for Tasks and force the application to query first by Project, then by Activity (in context of Project), then by task (in context of Activity) adding the observer relationships at each step but I'm not sure if that is the best way. I could setup a database event listening system so when a Task modified event is dispatched I have a handler which queries for the Activity at that point. I could simply setup a two-way relationship between Task and Activity so that the Task knows about the parent Activity and when the Task updates his state the Task grabs his parent and updates state. Right now I'm stuck considering all the options and am wondering if any single approach (doesn't have to be a listed approach) is jumping out at others as the best approach.

  Read the article

• Farseer circle hangs where it's spawned

  - by necrosmash

  I'm currently trying to simply spawn a circle in Farseer. However, it's stuck wherever I spawn it! The game is updating fine, as I can see the circle spinning in place when I spawn it because of how I currently have gravity set up (following code from Game1.cs): // Initialise the screen center for use with // the Level class screenCenter = new Vector2(graphics.GraphicsDevice.Viewport.Width / 2f, graphics.GraphicsDevice.Viewport.Height / 2f); world = new World(new Vector2(20, 20)); currentLevel = new Level1(screenCenter, circleSprite, groundSprite, ref world); Level1 constructor: public Level1(Vector2 screenCenter, Texture2D circleSprite, Texture2D groundSprite, ref World world) { player = new Player(ref world, screenCenter, circleSprite); ground = new Ground(ref world, screenCenter, groundSprite); listLevelItems = new List<LevelItem>(); listLevelItems.Add(player); listLevelItems.Add(ground); } Player constructor: public Player(ref World world, Vector2 screenCenter, Texture2D sprite) { setSprite(sprite); setPosition((screenCenter / MeterInPixels) + new Vector2(0f, 0f)); playerBody = BodyFactory.CreateCircle(world, 96f / (2f * MeterInPixels), 1f, playerPosition); getBody().BodyType = BodyType.Dynamic; // Ball bounce and friction getBody().Restitution = 0.3f; getBody().Friction = 0.5f; } If I use a breakpoint and change the playerBody position while the game is halted, the ball does move, but stays fixed in its new location. Any help would be greatly appreciated.

  Read the article

• how to get wireless to work on my HP Compaq nx6325 Notebook on 12.04

  - by user211487

  When my laptop ran XP, the wireless worked perfectly. Now the only way I get internet is having it wired in my living room - which is MASSIVELY inconvenient for me seeing as my room is outside. I have downloaded the driver from 'Additional Drivers', reset my computer (with difficulty, it also doesn't seem to like turning off, so I have to 'kill' it) and still nothing! I have looked all over the internet trying to find solutions but I just cant seem to get it to work. I have a USB wireless stick but I can't load the driver from the CD. I got this comment on a previous question: "Using either Snaptic Package Manager or Ubuntu's own Software Centre, remove "bcmwl-kernel-source" if it's already installed. Next, search for "firmware-b43-installer” and “b43-fwcutter” and install both. Finally, running Software Sources and checking the Additional Drivers tab you should find Broadcom STA Wireless Driver that you can select, install and on reboot hopefully have wireless working ok..." Which I replied: "Right, so I tried to find/remove "bcmwl-kernel-source" but couldn't find anything. I managed to install both "firmware-b43-installer” and “b43-fwcutter” using terminal, after finding out how it worked. And lastly, I couldn't figure out how to find 'Broadcom STA Wireless Driver' - still no more additional drivers. And my wireless is still not working. My laptop has a button that turns wifi on and off and since I put Ubuntu on it, it hasn't worked. And also, my computer still doesn't seem to restart properly - it just gets stuck on the ubuntu loading screen." - hope that helps, somewhat I am VERY new to Linux, not very technical and in need of help! -Running Ubuntu 12.04 32bit on a HP Compaq nx6325 Notebook Thank you to anyone who replies, its much appreciated

  Read the article

• Ubuntu installer shows three small screens

  - by Sylan

  I'm trying to install Ubuntu (or Kubuntu, which I tried first) 13.04 on a new laptop. I need the install in UEFI mode in order to properly dual boot with Windows 8. I've managed to overcome most of the UEFI issues up to the installer, which appeared as a black screen until I used nomodeset. Now the installer will appear, however it does fit my screen size. Instead, it appears as three small identical screens across the top of the monitor. I thought the problem could be solved by changing the display resolution in GRUB via changing the vga number, but this simply expanded the width of the three screens. While I could install it at this point, the identical screens are too small for me to be able to read the installer. As well, the "Try Ubuntu" option simply gets stuck at a black screen. I'm afraid these problems may persist through the installation if I attempted to continue. Additional information: The laptop is a Lenovo Ideapad Y580 with an i7 3630qm processor, and a GeForce GTX 660m graphics card which works alongside an Intel HD 4000 integrated card via Optimus.

  Read the article

• Help with Abstract Factory Pattern

  - by brazc0re

  I need help with a abstract factory pattern design. This question is a continuation of: Design help with parallel process I am really confused where I should be initializing all of the settings for each type of medium (ex: RS232, TCP/IP, etc). Attached is the drawing on how I am setting up the pattern: As shown, when a medium is created, each medium imposes a ICreateMedium interface. I would assume that the Create() method also create the proper object, such as SerialPort serialPort = new SerialPort("COM1", baud); however, TCPIPMedium would have an issue with the interface because it wouldn't need to initialize a serial port object. I know I am doing something majorly wrong here. I just can't figure it out and have been stuck for a while. What I also get confused on show the interface IMedium will get access to the communication object once it is created so it can write out the appropriate byte[] packet. Any guidance would be greatly appreciated. My main goal is to have the Communicator class spit a packet out without caring which type of medium is active.

  Read the article

• Can't get utouch to show available wifi networks

  - by kellrobinson

  I have ubuntu touch installed on a 2014 Nexus 7. Swiping down from the wireless symbol reveals a "Network" menu with the choices Flight Mode, Wifi Settings, and Cellular Settings. Wifi Settings leads to another menu: Previous Networks, and Other Networks. Previous Networks shows a list of networks used in the past; Other Networks opens an empty box for typing in the name of a network. I don't see any way to show a list of available networks detected by the device. On rare occasions, swiping down the wireless symbol actually does bring up a list of detected networks. But most of the time ubuntu touch exhibits the behavior described above, with no apparent way to bring up the list of available wireless networks. I would like to see a list of the availble networks, if there is a way to do so. Edit: The wifi menu works properly now. Just needed a couple of reboots, it seems. I have other problems, though. If these other problems persist I will make a post specific to them. This device is a 2013 Nexus 7 4G. Not sure how to find the ubuntu version. Can't navigate the settings menu right now because it got stuck and there's no way to go back, except to reboot(!) I'll open multirom manager or boot into recovery and look for the information there.

  Read the article

• Nvidia drivers with GeForce 680M problem [closed]

  - by biofermin

  Possible Duplicate: There's an issue with an Alpha/Beta Release of Ubuntu, what should I do? I have a new Alienware M17x which I have installed 64-bit Ubuntu 12.10 (dual boot). I have tried various ways to install the Nvidia drivers for the GeForce GTX 680M (which they claim they are compatible with): from Ubuntu Software Centre (though Additional Drivers fails to detect the card.) using sudo apt-get install nvidia-current downloading the drivers from nvidia and manually installing them (ctrl + alt + F6, sudo service lightdm stop, sudo ./NVIDIA*, sudo reboot) (each with a clean install of Ubuntu) but in all cases, when I reboot after installing nvidia-setings claims that I am not using the driver and should sudo nvidia-xconfig from the terminal, which I do but this has no effect and I am stuck in crappy resolution until I rm /etc/X11/xorg.conf and reboot. The xorg.conf that nvidia-xconfig generates is: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Installing nVidia drivers for Quadro FX 880M on 10.10 caused shutdown/startup issues.

  - by Chantz

  So I was facing weird graphics drivers issues due to the default nouveau drivers that came installed with Ubuntu 10.10 hence I installed the latest nVidia graphics drivers & I the weird graphics issues stopped happening. So far so good, but when I tried to shut down the laptop it got stuck at the window with text 15, shutting down... modem-manager: Caught signal 15, shutting down... init: Disconnected from system us init: dbus main process (1107) killed by TERM signal And this happens .everytime.without.fail. I tried updating the kernel and any/all drivers through update manager but it stil happens. Not only this even the startup screen is totally screwed up. It just displays Ubuntu 10.10 in text with 3 dots. But that is acceptable. To power cycle down the laptop each and everytime for shutdown is not cool. Same goes for when I try to restart. Interesting thing is if I try to shutdown the laptop when I am on the login screen it does so without any problems. I googled & many people seem to face the same issue but I couldn't find any silver bullet hoping to find one here.

  Read the article

• What can I do in order to inform users of potential errors in my software in order to minimize liability?

  - by phobitor

  I'm an independent software developer that's spent the last few months creating software for viewing and searching map data. The software has some navigation functionality as well (mapping, directions,etc). The eventual goal is to sell it in mobile app markets. I use OpenStreetMap as my data source. I'm concerned about liability for erroneous map data / routing instructions, etc that might result when someone uses the application. There are a lot of stories on the internet where someone gets into an accident or gets stuck or gets lost because of their GPS unit/Google Maps/mapping app... I myself have come across incorrect map data as well in a GPS unit I have in my car. While I try to make my own software as bug free as possible, no software is truly bug free. And moving beyond what I can control, OpenStreetMap data (and street map data in general) is prone to errors as well. What steps can I take to clearly inform the user that results from the software aren't always perfect, and to minimize my liability?

  Read the article

• Collider2D and Rigidbody2D, how do they work?

  - by user42646

  I have been learning JavaScript and Unity for a week now. I learned how to make Cube as a Ground and another Cube as a player and I used this code to make the Player Cube move forward and backward and jumping var walkspeed: float = 5.0; var jumpheight: float = 250.0; var grounded = false; function Update() { rigidbody.freezeRotation = true; if (Input.GetKey("a")) transform.Translate(Vector3(-1, 0, 0) * Time.deltaTime * walkspeed); if (Input.GetKey("d")) transform.Translate(Vector3(1, 0, 0) * Time.deltaTime * walkspeed); if (Input.GetButton("Jump")) { Jump(); } } function OnCollisionEnter(hit: Collision) { grounded = true; } function Jump() { if (grounded == true) { rigidbody.AddForce(Vector3.up * jumpheight); grounded = false; } } I also learned how to make a character hit box. how to make a sprite and animation. pretty much the basic stuff. Couple of days ago I created simple ground in Photoshop and a simple character and imported them to Unity3D. Whenever I use my code above the character keeps falling from the scene. Like the character has nothing to stand on. After thinking about it it make sense because I really didn't make anything to make the player character understand that he should stand on something so I started reading about this issue and I realized that there is something called Collider2D and Rigidbody2D. Now I'm really stuck here I just don't know what to do. I applied the rigibody2d to my character picture and the Collider2D to the ground picture but whenever I play the project the gravity makes my character falls down. This is my question: How can I make the rigibody2d object realize that it shouldn't fall if there is a Collider2D object under it? So when I jump it's going to jump and the gravity going to bring it back to the ground.

  Read the article

• No boot option after installing Ubuntu 12.04 LTS on Acer Aspire 4736z with Live CD

  - by utamaku

  I am facing a problem. After installing Ubuntu 12.04 LTS using Live CD, at the reboot there is no boot option to choose the OS. I directly get logged into my Windows 7. Before that i was having an issue with the 'nomodeset' if not mistaken .After ticking [x] on the nomodeset, i can install my Ubuntu, but got stucked again at choosing the partition option. So i did 2 partitions for Ubuntu, 1 partition as ext3 for / and the other 1 for swap. Which enabled to proceed until the finished installation dialogue, and after that system wants to reboot .It takes some time and gets stuck at the screen doing nothing, doesn't reboot at all. I did forced shutdown then rebooted again which directly logs me in windows 7 without boot option. In win7 the partitions for Ubuntu is gone. I tried the boot-repair thing and it doesn't help .It just shows up the _ Blank Cursor (terminal thing i guess). I typed boot repair but still the same result. I am using Acer Aspire 4736z. Please somebody help me with this issue.

  Read the article

• Battery life low on notebook using ubuntu 11.10 vs. windows 7

  - by les

  Im using a brand new Dell XPS notebook (bought mar 2012) which has 4.5 hrs battery life using a 6 cell battery-when i use windows 7. The machine uses an Intel core 17 2670qm processor, and a 64 bit operating system. I downloaded Ubuntu 11.10 and installed it on a USB drive, which is how i use it. I still have Windows 7 on the machine. When the machine is booting up I hit F12, and run Ubuntu from the flash drive instead of the machine booting Windows, as it normally would. On the Ubuntu menu, on the top right area, there is a battery menu, which shows how long to charge battery, or how much life left etc..with a fully charged battery the most Ubuntu will give me is 1.5 hrs. I've adjusted all power setting etc by clicking on the battery meter where i can make these adjustments, and have even turned down the brightness on the monitor. I've read through these questions here, and a user wrote to install Ubuntu 12(?)(the alpha version) when it's out this month(april), and this has better power management. Other forums (Ubuntu wiki) state that windows 7 controls power management effectively because it's configured to work with the hardware. I'd like to install Ubuntu and wipe windows but can't because of this issue. I need my notebook to go hours, not an hour and a bit. Can anybody recommend possibly a good software to use, that will work with the machines bios under Ubuntu? Another thought of mine, is- since I didn't yet wipe windows off my hard disk, is windows still possibly controlling the power mgmt aspect on the machine? I've thought of calling tech support at Dell and asking for help there, maybe Dell has something (a tweak?), I can download that'll work under Ubuntu. Looking forward to any help/suggestions i can get here, i'm really stuck on this..

  Read the article

• Server Setups for Agencies [closed]

  - by styks1987

  We are considering consolidating our server administration by cutting down on the number of systems we currently use to manage all our websites(~65 websites). Currently we have a testing server and 3 production servers. (2 - cherokee(linode), 1 - apache (mt)) We don't have a dedicated server admin, so I am stuck with managing all these servers, and as a developer, I don't want to deal with all the server hassle. So my main goal is to cut down on the time spent messing with the servers. We have looked at Pagoda Box and AppFog as possibilities. I am not sure if Pagoda Box would be cost effective. With 65+ websites we may end up paying anywhere from 0 to $50+ per website per month. Right now we page about $250 per month for the 4 VPS servers mentioned above. We already use Capistrano for deployment. I have the opportunity to completely overhaul the entire setup and I would like some feedback on where you found your information for large scale server management or how you currently do it. Articles are welcome. In summary: What is new (past 2 years) in simple server management arena? If you work at an agency or have had agency experience, how do/did you manage your sites? a. What is the level of effort for SSL, new site setup, database management, and extension management. b. How did you handle datacenter outages. Anyone with Pagoda Box experience, do you like it and did you have problems with Wordpress, Cakephp, Drupal, Expression Engine or Magento? a. Is it expensive for you? b. How has server uptime been? Your direction and comments are greatly appreciated.

  Read the article

• Multiple passes in direct3d10

  - by innochenti

  I begin to learning direct3d10 and stuck with multiple passes. As input I have a triangle(that stored in vb/ib) and effect file: //some vertex shader and globals goes there. skip them to preserve simplicity float4 ColorPixelShader(PixelInputType input) : SV_Target { return float4(1,0,0,0); } float4 ColorPixelShader1(PixelInputType input) : SV_Target { return float4(0,1,0,0); } technique10 ColorTechnique { pass pass0 { SetVertexShader(CompileShader(vs_4_0, ColorVertexShader())); SetPixelShader(CompileShader(ps_4_0, ColorPixelShader())); SetGeometryShader(NULL); } pass pass1 { SetVertexShader(CompileShader(vs_4_0, ColorVertexShader())); SetPixelShader(CompileShader(ps_4_0, ColorPixelShader1())); SetGeometryShader(NULL); } } And some render code: pass1->Apply(0); device->DrawIndexed(indexCount, 0, 0); pass2->Apply(0); device->DrawIndexed(indexCount, 0, 0); What I'd expect to see is the green triangle, but it always shows me red triangle. What am I doing wrong? Also, I've got another question - should I set vertex shader in every pass? I've added ColorVertexShader1 that translates vertex position by some delta, and 've got following picture: http://imgur.com/Oe7Qj

  Read the article

• MWE function error message saying "use of undeclared indentifier" [migrated]

  - by nimbus

  I'm unsure about how to make MWE with Objective C, so if you need anything else let me know. I am trying running through a tutorial on building an iPhone app and have gotten stuck defining a function. I keep getting an error message saying "use of undeclared indentifier". However I believe I have initiated the function. In the view controller I have: if (scrollAmount > 0) { moveViewUp = YES; [scrollTheView:YES]; } else{ moveViewUp = NO; } with the function under it - (void)scrollTheView:(BOOL)movedUp { [UIView beginAnimations:nil context:NULL]; [UIView setAnimationDuration:0.3]; CGRect rect = self.view.frame; if (movedUp){ rect.origin.y -= scrollAmount; } else { rect.origin.y += scrollAmount; } self.view.frame = rect; [UIView commitAnimations]; } I have initiated the function in the header file (that I have imported). - (void)scrollTheView:(BOOL)movedUp;

  Read the article

• Using Subdomains for Newly Regional Company

  - by Taylord22

  The company I work for is expanding their business to new territories. I've got a lot of stabilization to do in the region/state where we're one of the most well known companies of our kind. Currently, we have 3 distinct product lines which are currently distinguished by 3 separate URLS. This is affecting the user flow of our site, so we'd like to clean it up before launching our products into the various regions. The business has decided to grow into 5 new states (one state consisting of one county only) — none of which will feature all 3 products. Our homebase state is the only one that will have all 3 products this year. My initial thought was to use subdomains to separate out the regions, that way we could use a canonical tag to stabilize the root domain (which would feature home state content, and support content for all regions), and remove us from potential duplicate content penalization. Our product content will be nearly identical across the regions for the first year. I second guessed myself by thinking that it was perhaps better to use a "[product].root/region" URL instead. And I'm currently stuck by wondering if it was not better to build out subdomains for products and regions...using one modifier or the other as a funnel/branding page into the other. For instance, user lands on "region.root.com" and sees exactly what products we offer in that region. Basically, a tailored landing page. Meanwhile the bulk of the product content would actually live under "product.root.com/region/page". My head is spinning. And while searching for similar questions I also bumped into reference of another tag meant to be used in some similar cases to mine. I feel like there's a lot of risks involved in this subdomain strategy, but I also can't help but see the benefits in the user flow.

  Read the article

< Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >