Search Results

Search found 68211 results on 2729 pages for 'visual web developer 2010'.

Page 1324/2729 | < Previous Page | 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331  | Next Page >

• Bypass BIOS password set by faulty Toshiba firmware on Satellite A55 laptop?

  - by Brian

  How can the CMOS be cleared on the Toshiba Satellite A55-S1065? I have this 7 year old laptop that has been crippled by a glitch in its BIOS: 'A "Password =" prompt may be displayed when the computer is turned on, even though no power-on password has been set. If this happens, there is no password that will satisfy the password request. The computer will be unusable until this problem is resolved. [..] The occurrence of this problem on any particular computer is unpredictable -- it may never happen, but it could happen any time that the computer is turned on. [..] Toshiba will cover the cost of this repair under warranty until Dec 31, 2010.' -Toshiba As they stated, this machine is "unusable." The escape key does not bypass the prompt (nor does any other key), thus no operating system can be booted and no firmware updates can be installed. After doing some research, I found solutions that have been suggested for various Toshiba Satellite models afflicted by this glitch: "Make arrangements with a Toshiba Authorized Service Provider to have this problem resolved." -Toshiba (same link). Even prior to the expiration of Toshiba's support ("repair under warranty until Dec 31, 2010"), there have been reports that this solution is prohibitively expensive, labor charges accruing even when the laptop is still under warranty, and other reports that are generally discouraging: "They were unable to fix it and the guy who worked on it said he couldn’t find the jumpers on the motherboard to clear the BIOS. I paid $39 for my troubles and still have the password problem." - Steve. Since the costs of the repairs can now exceed the value of the hardware, it would seem this is a DIY solution, or a non-solution (i.e. the hardware is trash). Build a Toshiba parallel loopback by stripping and soldering the wires on a DB25 plug to connect connect these pins: 1-5-10, 2-11, 3-17, 4-12, 6-16, 7-13, 8-14, 9-15, 18-25. -CGSecurity. According to a list of supported models on pwcrack, this will likely not work for my Satellite A55-1065 (as well as many other models of similar age). -pwcrack Disconnect the laptop battery for an extended period of time. Doesn't work, laptop sat in a closet for several years without the battery connected and I forgot about the whole thing for awhile. The poor thing. Clear CMOS by setting the proper jumper setting or by removing the CMOS (RTC) battery, or by short circuiting a (hidden?) jumper that looks like a pair of solder marks -various sources for various Satellite models: Satellite A105: "you will see C88 clearly labeled right next the jack that the wireless card plugs into. There are two little solder squares (approx 1/16") at this location" -kerneltrap Satellite 1800: "Underneath the RAM there is black sticker, peel off the black sticker and you will reveal two little solder marks which are actually 'jumpers'. Very carefully hold a flat-head screwdriver touching both points and power on the unit briefly, effectively 'shorting' this circuit." -shadowfax2020 Satellite L300: "Short the B500 solder pads on the system board." -Lester Escobar Satellite A215: "Short the B500 solder pads on the system board." -fixya Clearing the CMOS could resolve the issue, but I cannot locate a jumper or a battery on this board. Nothing that looks remotely like a battery can be removed (everything is soldered). I have looked closely at the area around the memory and do not see any obvious solder pads that could be a secret jumper. Here are pictures (click for full resolution) : Where is the jumper (or solder pads) to short circuit and wipe the CMOS on this board? Possibly related questions: Remove Toshiba laptop BIOS password? Password Problem Toshiba Satellite..

  Read the article

• What free space thresholds/limits are advisable for 640 GB and 2 TB hard disk drives with ZEVO ZFS on OS X?

  - by Graham Perrin

  Assuming that free space advice for ZEVO will not differ from advice for other modern implementations of ZFS … Question Please, what percentages or amounts of free space are advisable for hard disk drives of the following sizes? 640 GB 2 TB Thoughts A standard answer for modern implementations of ZFS might be "no more than 96 percent full". However if apply that to (say) a single-disk 640 GB dataset where some of the files most commonly used (by VirtualBox) are larger than 15 GB each, then I guess that blocks for those files will become sub optimally spread across the platters with around 26 GB free. I read that in most cases, fragmentation and defragmentation should not be a concern with ZFS. Sill, I like the mental picture of most fragments of a large .vdi in reasonably close proximity to each other. (Do features of ZFS make that wish for proximity too old-fashioned?) Side note: there might arise the question of how to optimise performance after a threshold is 'broken'. If it arises, I'll keep it separate. Background On a 640 GB StoreJet Transcend (product ID 0x2329) in the past I probably went beyond an advisable threshold. Currently the largest file is around 17 GB –  – and I doubt that any .vdi or other file on this disk will grow beyond 40 GB. (Ignore the purple masses, those are bundles of 8 MB band files.) Without HFS Plus: the thresholds of twenty, ten and five percent that I associate with Mobile Time Machine file system need not apply. I currently use ZEVO Community Edition 1.1.1 with Mountain Lion, OS X 10.8.2, but I'd like answers to be not too version-specific. References, chronological order ZFS Block Allocation (Jeff Bonwick's Blog) (2006-11-04) Space Maps (Jeff Bonwick's Blog) (2007-09-13) Doubling Exchange Performance (Bizarre ! Vous avez dit Bizarre ?) (2010-03-11) … So to solve this problem, what went in 2010/Q1 software release is multifold. The most important thing is: we increased the threshold at which we switched from 'first fit' (go fast) to 'best fit' (pack tight) from 70% full to 96% full. With TB drives, each slab is at least 5GB and 4% is still 200MB plenty of space and no need to do anything radical before that. This gave us the biggest bang. Second, instead of trying to reuse the same primary slabs until it failed an allocation we decided to stop giving the primary slab this preferential threatment as soon as the biggest allocation that could be satisfied by a slab was down to 128K (metaslab_df_alloc_threshold). At that point we were ready to switch to another slab that had more free space. We also decided to reduce the SMO bonus. Before, a slab that was 50% empty was preferred over slabs that had never been used. In order to foster more write aggregation, we reduced the threshold to 33% empty. This means that a random write workload now spread to more slabs where each one will have larger amount of free space leading to more write aggregation. Finally we also saw that slab loading was contributing to lower performance and implemented a slab prefetch mechanism to reduce down time associated with that operation. The conjunction of all these changes lead to 50% improved OLTP and 70% reduced variability from run to run … OLTP Improvements in Sun Storage 7000 2010.Q1 (Performance Profiles) (2010-03-11) Alasdair on Everything » ZFS runs really slowly when free disk usage goes above 80% (2010-07-18) where commentary includes: … OpenSolaris has changed this in onnv revision 11146 … [CFT] Improved ZFS metaslab code (faster write speed) (2010-08-22)

  Read the article

• To ORM or Not to ORM. That is the question&hellip;

  - by Patrick Liekhus

  UPDATE:  Thanks for the feedback and comments.  I have adjusted my table below with your recommendations.  I had missed a point or two. I wanted to do a series on creating an entire project using the EDMX XAF code generation and the SpecFlow BDD Easy Test tools discussed in my earlier posts, but I thought it would be appropriate to start with a simple comparison and reasoning on why I choose to use these tools. Let’s start by defining the term ORM, or Object-Relational Mapping.  According to Wikipedia it is defined as the following: Object-relational mapping (ORM, O/RM, and O/R mapping) in computer software is a programming technique for converting data between incompatible type systems in object-oriented programming languages. This creates, in effect, a "virtual object database" that can be used from within the programming language. Why should you care?  Basically it allows you to map your business objects in code to their persistence layer behind them. And better yet, why would you want to do this?  Let me outline it in the following points: Development speed.  No more need to map repetitive tasks query results to object members.  Once the map is created the code is rendered for you. Persistence portability.  The ORM knows how to map SQL specific syntax for the persistence engine you choose.  It does not matter if it is SQL Server, Oracle and another database of your choosing. Standard/Boilerplate code is simplified.  The basic CRUD operations are consistent and case use database metadata for basic operations. So how does this help?  Well, let’s compare some of the ORM tools that I have used and/or researched.  I have been interested in ORM for some time now.  My ORM of choice for a long time was NHibernate and I still believe it has a strong case in some business situations.  However, you have to take business considerations into account and the law of diminishing returns.  Because of these two factors, my recent activity and experience has been around DevExpress eXpress Persistence Objects (XPO).  The primary reason for this is because they have the DevExpress eXpress Application Framework (XAF) that sits on top of XPO.  With this added value, the data model can be created (either database first of code first) and the Web and Windows client can be created from these maps.  While out of the box they provide some simple list and detail screens, you can verify easily extend and modify these to your liking.  DevExpress has done a tremendous job of providing enough framework while also staying out of the way when you need to extend it.  This sounds worse than it really is.  What I mean by this is that if you choose to follow DevExpress coding style and recommendations, the hooks and extension points provided allow you to do some pretty heavy lifting while also not worrying about the basics. I have put together a list of the top features that I have used to compare the limited list of ORM’s that I have exposure with.  Again, the biggest selling point in my opinion is that XPO is just a solid as any of the other ORM’s but with the added layer of XAF they become unstoppable.  And then couple that with the EDMX modeling tools and code generation, it becomes a no brainer. Designer Features Entity Framework NHibernate Fluent w/ Nhibernate Telerik OpenAccess DevExpress XPO DevExpress XPO/XAF plus Liekhus Tools Uses XML to map relationships - Yes - - -   Visual class designer interface Yes - - - - Yes Management integrated w/ Visual Studio Yes - - Yes - Yes Supports schema first approach Yes - - Yes - Yes Supports model first approach Yes - - Yes Yes Yes Supports code first approach Yes Yes Yes Yes Yes Yes Attribute driven coding style Yes - Yes - Yes Yes                 I have a very small team and limited resources with a lot of responsibilities.  In order to keep up with our customers, we must rely on tools like these.  We use the EDMX tool so that we can create a visual representation of the applications with our customers.  Second, we rely on the code generation so that we can focus on the business problems at hand and not whether a field is mapped correctly.  This keeps us from requiring as many junior level developers on our team.  I have also worked on multiple teams where they believed in writing their own “framework”.  In my experiences and opinion this is not the route to take unless you have a team dedicated to supporting just the framework.  Each time that I have worked on custom frameworks, the framework eventually becomes old, out dated and full of “performance” enhancements specific to one or two requirements.  With an ORM, there are a lot smarter people than me working on the bigger issue of persistence and performance.  Again, my recommendation would be to use an available framework and get to working on your business domain problems.  If your coding is not making money for you, why are you working on it?  Do you really need to be writing query to object member code again and again? Thanks

  Read the article

• Management and Monitoring Tools for Windows Azure

  - by BuckWoody

  With such a large platform, Windows Azure has a lot of moving parts. We’ve done our best to keep the interface as simple as possible, while giving you the most control and visibility we can. However, as with most Microsoft products, there are multiple ways to do something – and I’ve always found that to be a good strength. Depending on the situation, I might want a graphical interface, a command-line interface, or just an API so I can incorporate the management into my own tools, or have third-party companies write other tools. While by no means exhaustive, I thought I might put together a quick list of a few tools you can use to manage and monitor Windows Azure components, from our IaaS, SaaS and PaaS offerings. Some of the products focus on one area more than another, but all are available today. I’ll try and maintain this list to keep it current, but make sure you check the date of this post’s update – if it’s more than six months old, it’s most likely out of date. Things move fast in the cloud. The Windows Azure Management Portal The primary tool for managing Windows Azure is our portal – most everything you need is there, from creating new services to querying a database. There are two versions as of this writing – a Silverlight client version, and a newer HTML5 version. The latter is being updated constantly to be in parity with the Silverlight client. There’s a balance in this portal between simplicity and power – we’re following the “less is more” approach, with increasing levels of detail as you work through the portal rather than overwhelming you with a single, long “more is more” page. You can find the Portal here: http://windowsazure.com (then click “Log In” and then “Portal”) Windows Azure Management API You can also use programming tools to either write your own interface, or simply provide management functions directly within your solution. You have two options – you can use the more universal REST API’s, which area bit more complex but work with any system that can write to them, or the more approachable .NET API calls in code. You can find the reference for the API’s here: http://msdn.microsoft.com/en-us/library/windowsazure/ee460799.aspx  All Class Libraries, for each part of Windows Azure: http://msdn.microsoft.com/en-us/library/ee393295.aspx  PowerShell Command-lets PowerShell is one of the most powerful scripting languages I’ve used with Windows – and it’s baked into all of our products. When you need to work with multiple servers, scripting is really the only way to go, and the Windows Azure PowerShell Command-Lets allow you to work across most any part of the platform – and can even be used within the services themselves. You can do everything with them from creating a new IaaS, PaaS or SaaS service, to controlling them and even working with security and more. You can find more about the Command-Lets here: http://wappowershell.codeplex.com/documentation (older link, still works, will point you to the new ones as well) We have command-line utilities for other operating systems as well: https://www.windowsazure.com/en-us/manage/downloads/  Video walkthrough of using the Command-Lets: http://channel9.msdn.com/Events/BUILD/BUILD2011/SAC-859T  System Center System Center is actually a suite of graphical tools you can use to manage, deploy, control, monitor and tune software from Microsoft and even other platforms. This will be the primary tool we’ll recommend for managing a hybrid or contiguous management process – and as time goes on you’ll see more and more features put into System Center for the entire Windows Azure suite of products. You can find the Management Pack and README for it here: http://www.microsoft.com/en-us/download/details.aspx?id=11324  SQL Server Management Studio / Data Tools / Visual Studio SQL Server has two built-in management and development, and since Version 2008 R2, you can use them to manage Windows Azure Databases. Visual Studio also lets you connect to and manage portions of Windows Azure as well as Windows Azure Databases. You can read more about Visual Studio here: http://msdn.microsoft.com/en-us/library/windowsazure/ee405484  You can read more about the SQL tools here: http://msdn.microsoft.com/en-us/library/windowsazure/ee621784.aspx  Vendor-Provided Tools Microsoft does not suggest or endorse a specific third-party product. We do, however, use them, and see lots of other customers use them. You can browse to these sites to learn more, and chat with their folks directly on how they support Windows Azure. Cerebrata: Tools for managing from the command-line, graphical diagnostics, graphical storage management - http://www.cerebrata.com/  Quest Cloud Tools: Monitoring, Storage Management, and costing tools - http://communities.quest.com/community/cloud-tools  Paraleap: Monitoring tool - http://www.paraleap.com/AzureWatch  Cloudgraphs: Monitoring too -  http://www.cloudgraphs.com/  Opstera: Monitoring for Windows Azure and a Scale-out pattern manager - http://www.opstera.com/products/Azureops/  Compuware: SaaS performance monitoring, load testing -  http://www.compuware.com/application-performance-management/gomez-apm-products.html  SOASTA: Penetration and Security Testing - http://www.soasta.com/cloudtest/enterprise/  LoadStorm: Load-testing tool - http://loadstorm.com/windows-azure  Open-Source Tools This is probably the most specific set of tools, and the list I’ll have to maintain most often. Smaller projects have a way of coming and going, so I’ll try and make sure this list is current. Windows Azure MMC: (I actually use this one a lot) http://wapmmc.codeplex.com/  Windows Azure Diagnostics Monitor: http://archive.msdn.microsoft.com/wazdmon  Azure Application Monitor: http://azuremonitor.codeplex.com/  Azure Web Log: http://www.xentrik.net/software/azure_web_log.html  Cloud Ninja:Multi-Tennant billing and performance monitor -  http://cnmb.codeplex.com/  Cloud Samurai: Multi-Tennant Management- http://cloudsamurai.codeplex.com/    If you have additions to this list, please post them as a comment and I’ll research and then add them. Thanks!

  Read the article

• Persistent static routes fail on MacOS 10.6.5 startup!

  - by verbalicious

  I'm unable to get static routes to persist a reboot on Mac OS 10.6.5. I've tried all of the methods prescribed in Google search results, and previous posts on this site. I've tried manually creating a launchd daemon, and used RouteSplit's launchd daemon to no avail. It's clear that the interface is not ready when these methods attempt to apply the route. This workstation in question is getting its IP from DHCP and probably hasn't gotten its DHCP lease when the command runs. We're able to apply the route by hand when logged in, but not through startup methods. Is there another way to apply this route by sneaking the command into something later, but before the login window appears to the user? Here is some relevant log info from system.log. You can see the "route: writing to routing socket: Network is unreachable" errors where my launchd script fires off. I've tried adding extra "sleep" and "ipconfig waitall" statements later in the script but this doesn't fly. Dec 15 19:30:41 localhost com.apple.launchd[1]: *** launchd[1] has started up. *** Dec 15 19:30:45 localhost mDNSResponder[18]: mDNSResponder mDNSResponder-258.13 (Oct 8 2010 17:10:30) starting Dec 15 19:30:47 localhost configd[15]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50) Dec 15 19:30:47 localhost configd[15]: DHCP en1: INIT transmit failed Dec 15 19:30:47 localhost configd[15]: network configuration changed. Dec 15 19:30:47 Administrators-MacBook-Pro configd[15]: setting hostname to "Administrators-MacBook-Pro.local" Dec 15 19:30:47 Administrators-MacBook-Pro blued[16]: Apple Bluetooth daemon started Dec 15 19:30:52 Administrators-MacBook-Pro syslog[67]: routes.sh: Starting RouteSplit Dec 15 19:30:53 Administrators-MacBook-Pro com.apple.usbmuxd[41]: usbmuxd-207 built for iTunesTenOne on Oct 19 2010 at 13:50:35, running 64 bit Dec 15 19:30:54 Administrators-MacBook-Pro /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[50]: Login Window Application Started Dec 15 19:30:55 Administrators-MacBook-Pro bootlog[61]: BOOT_TIME: 1292459441 0 Dec 15 19:30:55 Administrators-MacBook-Pro syslog[86]: routes.sh: static route 192.168.0.0/23 192.168.2.2 Dec 15 19:30:55 Administrators-MacBook-Pro net.routes.static[65]: route: writing to routing socket: Network is unreachable Dec 15 19:30:55 Administrators-MacBook-Pro net.routes.static[65]: add net 192.168.0.0: gateway 192.168.2.2: Network is unreachable Dec 15 19:30:57 Administrators-MacBook-Pro org.apache.httpd[38]: httpd: Could not reliably determine the server's fully qualified domain name, using Administrators-MacBook-Pro.local for ServerName Dec 15 19:30:58 Administrators-MacBook-Pro loginwindow[50]: Login Window Started Security Agent Dec 15 19:30:58 Administrators-MacBook-Pro WindowServer[89]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged. Dec 15 19:30:58 Administrators-MacBook-Pro com.apple.WindowServer[89]: Wed Dec 15 19:30:58 Administrators-MacBook-Pro.local WindowServer[89] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged. Dec 15 19:31:18 Administrators-MacBook-Pro configd[15]: network configuration changed. Dec 15 19:31:19 administrators-macbook-pro configd[15]: setting hostname to "administrators-macbook-pro.local" Dec 15 19:31:25 administrators-macbook-pro _mdnsresponder[121]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds Dec 15 19:31:25 administrators-macbook-pro _mdnsresponder[124]: sntp options: a=2 v=1 e=0.100 E=5.000 P=2147483647.000 Dec 15 19:31:25 administrators-macbook-pro _mdnsresponder[124]: d=15 c=5 x=0 op=1 l=/var/run/sntp.pid f= time.apple.com Dec 15 19:31:25 administrators-macbook-pro _mdnsresponder[124]: sntp: getaddrinfo(hostname, ntp) failed with nodename nor servname provided, or not known Dec 15 19:31:27 administrators-macbook-pro configd[15]: network configuration changed. Dec 15 19:31:27 Administrators-MacBook-Pro configd[15]: setting hostname to "Administrators-MacBook-Pro.local" Dec 15 19:31:27 Administrators-MacBook-Pro ntpd[37]: Cannot find existing interface for address 17.151.16.20 Dec 15 19:31:27 Administrators-MacBook-Pro ntpd_initres[125]: ntpd indicates no data available! Dec 15 19:31:31 Administrators-MacBook-Pro sshd[128]: USER_PROCESS: 133 ttys000 Dec 15 19:31:37 Administrators-MacBook-Pro sudo[138]: administrator : TTY=ttys000 ; PWD=/Users/administrator ; USER=root ; COMMAND=/usr/bin/less /var/log/system.log ``You can see the following line in /var/log/kernel.log that shows the en0 interface coming up: Dec 15 19:30:51 Administrators-MacBook-Pro kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, No flow-control, Debug [796d,0f01,0de1,0300,c1e1,3800]

  Read the article

• Top Tweets SOA Partner Community – November 2011

  - by JuergenKress

  Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity soacommunity SOA Community Dutch ACEs SOA Partner Community award celebration wp.me/p10C8u-i9 OracleBPM Gauging Maturity of your BPM Strategy – part 1/2, bit.ly/vJE9UZ MagicChatzi Dutch ACE’s and ACE Directors had a small party: achatzia.blogspot.com/2011/11/celebr… leonsmiers #Capgemini #Oracle #BPM Blog index bit.ly/tUYtvD #yam lucasjellema Blog post by my colleague Emiel on the AMIS blog: Timeouts in Oracle SOA Suite 11g – tinyurl.com/73amo3r biemond Solving __OAUX_GENXSD_.TOP.XSD with BPEL: When you use an external web service in combination with a BPEL servic… t.co/Gzzatzrr OracleBlogs Jumpstart Fusion Middleware projects with Oracle User Productivity Kit ow.ly/1fJMev cpurdy on Oracle Coherence data grid, its new RESTful APIs, and Oracle Service Bus (OSB): blogs.oracle.com/slc/entry/orac… Accenture Learn how Service-Oriented Architecture can help public service agencies solve legacy system issues. bit.ly/sTteM4 #SOA eelzinga Thanks for organising it Andreas! #soacommunity eelzinga Had a nice drink with the fellow Dutch Oracle ACE members for a little celebration of the SOA Community Partner Award. #soacommunity EmielP Wrote a blogpost about timeouts in the #Oracle #SOA Suite: bit.ly/uhUcrX OracleBlogs Processing Binary Data in SOA Suite 11g t.co/Tzd1xBsY OracleBlogs Finding the Value in SOA by Stephen Bennett t.co/9MMLJoLz OTNArchBeat SOA All the Time; Architects in AZ; Clearing Info Integration hurdles t.co/5viNj8ib OracleBlogs Demo: Business Transaction Management with SOA Management Pack ow.ly/1fFBv3 OTNArchBeat SOA All the Time; Architects in AZ; Clearing Info Integration hurdles t.co/Dnfzo0PN oracletechnet Wikis.oracle.com lives leonsmiers A new #capgemini #oracle #blog, Measuring the Human Task activity in Oracle BPM bit.ly/uPan08 #yam @CapgeminiOracle OTNArchBeat 3 SOA business cases, explained in a 2-minute elevator speech | @JoeMcKendrick t.co/aYGNkZup OTNArchBeat Gartner, Inc. places Oracle SOA Governance in Magic Quadrant for SOA Governance Technologies t.co/bSG5cuTr Jphjulstad Red carpet to Oracle BPM – evita.no evita.no/ikbViewer/soa-… Oracle #Oracle Named a Leader in #SOA Governance Magic Quadrant by Leading Analyst Firm t.co/prnyGu2U soacommunity What presentations & topics do you like to see at the next SOA & BPM & Webcenter Community Forum early 2012? #soacommunity soacommunity Oracle BPM Suite 11g Handbook Released wp.me/p10C8u-hU OTNArchBeat SOA Development Virtual Developer Day (On Demand) | @soacommunity bit.ly/sqhQmX OracleBlogs SOA Development Virtual Developer Day (On Demand) t.co/MDrdnx0h 9 Nov Favorite Undo Retweet Reply OracleBlogs Specialized Partners Only! New Service to Promote Your Events t.co/qTgyEpY4 biemond @stevendavelaar this is for you t.co/hInKCcfY it explains your sso problem soacommunity SOA Development Virtual Developer Day (on demand) t.co/flXPWk4R soacommunity IPT Swiss SOA Experts – thanks for the nice ink wp.me/p10C8u-i3 soacommunity Enjoy #wjax specially the presentations from our #ACE @t_winterberg @myfear @AdamBien pic.twitter.com/m8VcBSG3 OTNArchBeat Discounts on books, more, for Oracle Technology Network members bit.ly/vRxMfB OracleSOA Justify the ROI of SOA in 10 seconds…a pic is worth 1000 words bit.ly/roi_of_soa_img #oraclesoa #soa #oow11 orclateamsoa A-Team SOA Blog: Case Management in BPM 11g -  Mark Foster Oracle BPM 11g & Case Management I’ve seen… t.co/l5zb6pFr t_winterberg Die nächste SIG #SOA steht an: 7.12. in Hamburg. Neues Tooling und Erfahrungen rund um Oracle FMW, SOA, BPM… (cont) deck.ly/~YC57v OracleBlogs Continuous Integration for SOA/BPM ow.ly/1fsekI OracleBlogs BPM Suite 11g Handbook Released ow.ly/1frlzv lucasjellema Iterating over collection (array) in BPM (and dispatching jobs for entries in array): t.co/1SEhSvWv – subprocesses are the key. lucasjellema Lucas Jellema Useful tip from Mark Nelson: BPM API documentation (as well as Human Workflow Service) available: redstack.wordpress.com/2011/09/28/api… OTNArchBeat SOA, cloud: it’s the architecture that matters | Joe McKendrick zd.net/tNCiTF orclateamsoa: Building a job dispatcher in BPM -or- Iterating over collections in BPM ow.ly/1frbrz orclateamsoa Using the Database as a Policy Store for SOA 11g ow.ly/1frbrA OracleBPM Oracle launches Process Accelerators for BPM: t.co/XPEE61QL Jphjulstad Human-Centric BPM Selection Checklist t.co/3TZXZHLH OracleBlogs Fusion Middleware General Session at OOW 2011: Missed It? Read On… t.co/aU5JvM6K gschmutz Great! The product page of the OSB 11g Development Cookbook is now online: t.co/5Jfbe6Ng Looking forward to get it, u too? brhubart Oracle IT Architecture Essentials; Lightweight Composite Service Development with SCA and Spring; Cloud Migration ow.ly/7esNg eelzinga New blogpost : Oracle Service Bus, Generic fault handling, bit.ly/sGr4UL #osb #oracleservicebus For regular information on Oracle SOA Suite become a member in the SOA Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) Blog Twitter LinkedIn Mix Forum Technorati Tags: soacommunity,twitter,Oracle,SOA Community,Jürgen Kress,OPN

  Read the article

• My Tech Ed North America Preview - Content Edition

  - by Chris Gardner

  As I promised in my last post, I feel the need to give you a rundown on all the technical content I am looking forward to checking out at Tech Ed this year. We shall start with the content I know I'll be able to see. This would be some demo stations in the Technical Learning Center. I will DEFINITELY be checking out the Windows Phone Device Bar. I will admit that I am a bit of a phone snob, and I just want to manhandle all that sexy, sexy tech. I am also planning on talking to the Windows Phone team and the Azure team. Year after year, I end up spending more time in either the TLC or taking certification tests than anywhere else. This leads me to the one "Exam Cram" session I hope to attend. There is a session to cram for 70-599: Designing and Developing Windows Phone Applications. I know this seems odd. I'm (sort of) an XNA guru. However, I'm not that up on my Silverlight. I know enough to add Silverlight to an XNA project. Now, let's talk breakout sessions. We always need to keep track of where we're going. I know, I talk about solving problems over forcing buzz words. However, it is important to know what those buzz words before you tell people not to use them. For this, we will look to the "What's New in Visual Studio 11" and "What's New in Microsoft .NET Framework 4.5." Of course, we do talk bad about buzz words around here. For this, I'm really looking forward to "Visual C#/Visual Basic: Becoming a Guru with Existing Features." I still have .NET 2 tricks that are crucial to my internal libraries. In depth knowledge will NEVER trump shortcut libraries. There is a session in ASP.NET for phones and tablets. For those of you that have not tried to use ASP.NET on a mobile device, there is one thing you really need to understand. Mobile devices don't use scroll bars. That's right; the thing with the least screen real estate doesn't use scroll bars. Thus, I am hoping this session will give some good advice in having an ASP.NET site target both mobile and desktop. The last "business only" session "The Accidental Team Foundation Server Admin." T & W Operations is a VERY small business. As such, I am the TFS admin because I'm the developer that is also the SQL Guru. I keep my server up, but it'd be nice to know some really cool tricks for the part time guy. This leads us the the fun sessions. Coding4Fun has a Kinect session. The Twitter followers will remember that I now have a Kinect for Windows sitting on my desk at work. I have gotten pretty handy with the device, but I KNOW I'm missing some good stuff. Finally, we come to Brian Prince's session on "Making Crazy Money with Games and the Cloud." Never mind the fact that we're using Azure at work. Never mind the fact that I'm actually using the cloud in a game. Never mind the fact that the session has the terms "Crazy Money" and "Games" in the title. If you've never seen Brian Prince speak, you're missing out. In the Hands-on-Labs, we are not allowed to make our own schedule. Instead, we're asked what sessions we can't miss, and they try to schedule around those times. This was the one session I said I couldn't miss. This should complete the technical content for the conference. Coming soon, I'll dig into the certifications I hope to attain. Then, we'll talk about the social activities for the week. Here's a preview of that. I am a member of The Krewe...

  Read the article

• Hosting a subversion working copy in an remote WebDAV folder

  - by Daniel Baulig

  This might be a bit awkward, but I'll try to explain what I am trying to achieve and what problems I encountered. First of all: whats this about? I am currently trying to set up a distributed working enviroment for developing a web page. My plan was to setup a SVN repository for version control, a live server where the actual live page ist hosted and a development server where I can work on the page. To ease things I intended to not have a local copy of the project on my disk, but to actually work directy on the files, that the development server hosts. For that I setup a WebDAV directory, under devserver.com/workspace, that actually mapped to files served under devserver.com/. So I could connect to devserver.com/workspace, change something and view the results live at devserver.com/. So far this worked perfectly. The next step was to create a SVN repository that would take care of my version control. I intended to be able to checkin to the reposiroty from my development server and at any time, with a small shell script, deploy any revision from the svn to the live server by checking out a copy of the revision into the live server directories. The second part, checking out into the live server, also worked perfectly. The first part though is where problems arose: My workstation is a Windows 7 machine. I connected to the WebDAV share using Windows built-in WebDAV support, which worked quite well. I can create, move, delete, edit, whatever files on my WebDAV share from my Windows machine perfectly. The next step was to checkout a working copy from the SVN (actually hosted at devserver.com/subversion/) into the WebDAV share. In the first try I used the Eclipse plugin subversive. The actual checkout worked fine and I can update and commit stuff to the repository, however, I cannot add any files to the ignore list. It always brings me an error. So I tried the same thing with a complete fresh repository using TortoiseSVN - and again it failed with the same errors. Here is what it says when trying to add files to svnignore: Some of selected resources were not added to ignore. svn: Cannot rename file '\\devserver.com@SSL\DavWWWRoot\workspace\.svn\tmp\dir-props.66fd8936-2701-0010-bb76-472f0b56a5d1.tmp' to '\\devserver.com@SSL\DavWWWRoot\workspace\.svn\tmp\dir-props' This is what apache2 tells me, when I try to add a file to svnignore: [Sun Mar 07 03:54:19 2010] [error] [client xxx.xxx.xxx.xxx] Negotiation: discovered file(s) matching request: /var/www/devserver.com/.svn/tmp/dir-props (None could be negotiated). [Sun Mar 07 03:54:31 2010] [error] [client xxx.xxx.xxx.xxx] (20)Not a directory: The URL contains extraneous path components. The resource could not be identified. [400, #0] Actually both messages are repeated several times. The first one occurs first and is repeated about 5 times and the second comes there after and is repeated propably more than 20 times. If I create a regular file, delete, rename or modify it none of those messages appear in my error.log While writing this question now I was able to add fils to svnignore using TortoiseSVN. However, after that, Eclipse would not let me commit anymore. The error that used to pop up when adding files to svnignore now also shows up while commiting. While searching the web I found some people having this same message appearing because they had files only different in upper- / lower-case naming. I checked my repository and did not find such files. I also read somewhere about people having troubles with WebDAV and file locking, because WebDAV's file locking capabilities seem to be very limited. At some stage I got errors telling me my repository was locked and thus the operations could not be completed. This error though did not appear anymore, since I setup a completely fresh repository and working copy. I would really appreciate any help anyone can provide me in fixing this problem! If there are any more questions feel free to ask. I know this is a somewhat unusual setup. Best regards, Daniel

  Read the article

• Talking JavaOne with Rock Star Martijn Verburg

  - by Janice J. Heiss

  JavaOne Rock Stars, conceived in 2005, are the top-rated speakers at each JavaOne Conference. They are awarded by their peers, who, through conference surveys, recognize them for their outstanding sessions and speaking ability. Over the years many of the world’s leading Java developers have been so recognized. Martijn Verburg has, in recent years, established himself as an important mover and shaker in the Java community. His “Diabolical Developer” session at the JavaOne 2011 Conference got people’s attention by identifying some of the worst practices Java developers are prone to engage in. Among other things, he is co-leader and organizer of the thriving London Java User Group (JUG) which has more than 2,500 members, co-represents the London JUG on the Executive Committee of the Java Community Process, and leads the global effort for the Java User Group “Adopt a JSR” and “Adopt OpenJDK” programs. Career highlights include overhauling technology stacks and SDLC practices at Mizuho International, mentoring Oracle on technical community management, and running off shore development teams for AIG. He is currently CTO at jClarity, a start-up focusing on automating optimization for Java/JVM related technologies, and Product Advisor at ZeroTurnaround. He co-authored, with Ben Evans, "The Well-Grounded Java Developer" published by Manning and, as a leading authority on technical team optimization, he is in high demand at major software conferences.Verburg is participating in five sessions, a busy man indeed. Here they are: CON6152 - Modern Software Development Antipatterns (with Ben Evans) UGF10434 - JCP and OpenJDK: Using the JUGs’ “Adopt” Programs in Your Group (with Csaba Toth) BOF4047 - OpenJDK Building and Testing: Case Study—Java User Group OpenJDK Bugathon (with Ben Evans and Cecilia Borg) BOF6283 - 101 Ways to Improve Java: Why Developer Participation Matters (with Bruno Souza and Heather Vancura-Chilson) HOL6500 - Finding and Solving Java Deadlocks (with Heinz Kabutz, Kirk Pepperdine, Ellen Kraffmiller and Henri Tremblay) When I asked Verburg about the biggest mistakes Java developers tend to make, he listed three: A lack of communication -- Software development is far more a social activity than a technical one; most projects fail because of communication issues and social dynamics, not because of a bad technical decision. Sadly, many developers never learn this lesson. No source control -- Developers simply storing code in local filesystems and emailing code in order to integrate Design-driven Design -- The need for some developers to cram every design pattern from the Gang of Four (GoF) book into their source code All of which raises the question: If these practices are so bad, why do developers engage in them? “I've seen a wide gamut of reasons,” said Verburg, who lists them as: * They were never taught at high school/university that their bad habits were harmful.* They weren't mentored in their first professional roles.* They've lost passion for their craft.* They're being deliberately malicious!* They think software development is a technical activity and not a social one.* They think that they'll be able to tidy it up later.A couple of key confusions and misconceptions beset Java developers, according to Verburg. “With Java and the JVM in particular I've seen a couple of trends,” he remarked. “One is that developers think that the JVM is a magic box that will clean up their memory, make their code run fast, as well as make them cups of coffee. The JVM does help in a lot of cases, but bad code can and will still lead to terrible results! The other trend is to try and force Java (the language) to do something it's not very good at, such as rapid web development. So you get a proliferation of overly complex frameworks, libraries and techniques trying to get around the fact that Java is a monolithic, statically typed, compiled, OO environment. It's not a Golden Hammer!”I asked him about the keys to running a good Java User Group. “You need to have a ‘Why,’” he observed. “Many user groups know what they do (typically, events) and how they do it (the logistics), but what really drives users to join your group and to stay is to give them a purpose. For example, within the LJC we constantly talk about the ‘Why,’ which in our case is several whys:* Re-ignite the passion that developers have for their craft* Raise the bar of Java developers in London* We want developers to have a voice in deciding the future of Java* We want to inspire the next generation of tech leaders* To bring the disparate tech groups in London together* So we could learn from each other* We believe that the Java ecosystem forms a cornerstone of our society today -- we want to protect that for the futureLooking ahead to Java 8 Verburg expressed excitement about Lambdas. “I cannot wait for Lambdas,” he enthused. “Brian Goetz and his group are doing a great job, especially given some of the backwards compatibility that they have to maintain. It's going to remove a lot of boiler plate and yet maintain readability, plus enable massive scaling.”Check out Martijn Verburg at JavaOne if you get a chance, and, stay tuned for a longer interview yours truly did with Martijn to be publish on otn/java some time after JavaOne.

  Read the article

• Talking JavaOne with Rock Star Martijn Verburg

  - by Janice J. Heiss

  JavaOne Rock Stars, conceived in 2005, are the top-rated speakers at each JavaOne Conference. They are awarded by their peers, who, through conference surveys, recognize them for their outstanding sessions and speaking ability. Over the years many of the world’s leading Java developers have been so recognized. Martijn Verburg has, in recent years, established himself as an important mover and shaker in the Java community. His “Diabolical Developer” session at the JavaOne 2011 Conference got people’s attention by identifying some of the worst practices Java developers are prone to engage in. Among other things, he is co-leader and organizer of the thriving London Java User Group (JUG) which has more than 2,500 members, co-represents the London JUG on the Executive Committee of the Java Community Process, and leads the global effort for the Java User Group “Adopt a JSR” and “Adopt OpenJDK” programs. Career highlights include overhauling technology stacks and SDLC practices at Mizuho International, mentoring Oracle on technical community management, and running off shore development teams for AIG. He is currently CTO at jClarity, a start-up focusing on automating optimization for Java/JVM related technologies, and Product Advisor at ZeroTurnaround. He co-authored, with Ben Evans, "The Well-Grounded Java Developer" published by Manning and, as a leading authority on technical team optimization, he is in high demand at major software conferences.Verburg is participating in five sessions, a busy man indeed. Here they are: CON6152 - Modern Software Development Antipatterns (with Ben Evans) UGF10434 - JCP and OpenJDK: Using the JUGs’ “Adopt” Programs in Your Group (with Csaba Toth) BOF4047 - OpenJDK Building and Testing: Case Study—Java User Group OpenJDK Bugathon (with Ben Evans and Cecilia Borg) BOF6283 - 101 Ways to Improve Java: Why Developer Participation Matters (with Bruno Souza and Heather Vancura-Chilson) HOL6500 - Finding and Solving Java Deadlocks (with Heinz Kabutz, Kirk Pepperdine, Ellen Kraffmiller and Henri Tremblay) When I asked Verburg about the biggest mistakes Java developers tend to make, he listed three: A lack of communication -- Software development is far more a social activity than a technical one; most projects fail because of communication issues and social dynamics, not because of a bad technical decision. Sadly, many developers never learn this lesson. No source control -- Developers simply storing code in local filesystems and emailing code in order to integrate Design-driven Design -- The need for some developers to cram every design pattern from the Gang of Four (GoF) book into their source code All of which raises the question: If these practices are so bad, why do developers engage in them? “I've seen a wide gamut of reasons,” said Verburg, who lists them as: * They were never taught at high school/university that their bad habits were harmful.* They weren't mentored in their first professional roles.* They've lost passion for their craft.* They're being deliberately malicious!* They think software development is a technical activity and not a social one.* They think that they'll be able to tidy it up later.A couple of key confusions and misconceptions beset Java developers, according to Verburg. “With Java and the JVM in particular I've seen a couple of trends,” he remarked. “One is that developers think that the JVM is a magic box that will clean up their memory, make their code run fast, as well as make them cups of coffee. The JVM does help in a lot of cases, but bad code can and will still lead to terrible results! The other trend is to try and force Java (the language) to do something it's not very good at, such as rapid web development. So you get a proliferation of overly complex frameworks, libraries and techniques trying to get around the fact that Java is a monolithic, statically typed, compiled, OO environment. It's not a Golden Hammer!”I asked him about the keys to running a good Java User Group. “You need to have a ‘Why,’” he observed. “Many user groups know what they do (typically, events) and how they do it (the logistics), but what really drives users to join your group and to stay is to give them a purpose. For example, within the LJC we constantly talk about the ‘Why,’ which in our case is several whys:* Re-ignite the passion that developers have for their craft* Raise the bar of Java developers in London* We want developers to have a voice in deciding the future of Java* We want to inspire the next generation of tech leaders* To bring the disparate tech groups in London together* So we could learn from each other* We believe that the Java ecosystem forms a cornerstone of our society today -- we want to protect that for the futureLooking ahead to Java 8 Verburg expressed excitement about Lambdas. “I cannot wait for Lambdas,” he enthused. “Brian Goetz and his group are doing a great job, especially given some of the backwards compatibility that they have to maintain. It's going to remove a lot of boiler plate and yet maintain readability, plus enable massive scaling.”Check out Martijn Verburg at JavaOne if you get a chance, and, stay tuned for a longer interview yours truly did with Martijn to be publish on otn/java some time after JavaOne. Originally published on blogs.oracle.com/javaone.

  Read the article

• Travelling MVP #4: DevReach 2012

  - by DigiMortal

  Our next stop after Varna was Sofia where DevReach happens. DevReach is one of my favorite conferences in Europe because of sensible prices and strong speakers line-up. Also they have VIP-party after conference and this is good event to meet people you don’t see every day, have some discussion with speakers and find new friends. Our trip from Varna to Sofia took about 6.5 hours on bus. As I was tired from last evening it wasn’t problem for me as I slept half the trip. After smoking pause in Velike Tarnovo I watched movies from bus TV. We had supper later in city center Happy’s – place with good meat dishes and nice service. And next day it begun…. :) DevReach 2012 DevReach is held usually in Arena Mladost. It’s near airport and Telerik office. The event is organized by local MVP Martin Kulov together with Telerik. Two days of sessions with strong speakers is good reason enough for me to go to visit some event. Some topics covered by sessions: Windows 8 development web development SharePoint Windows Azure Windows Phone architecture Visual Studio Practically everybody can find some interesting session in every time slot. As the Arena is not huge it is very easy to go from one sessions to another if selected session for time slot is not what you expected. On the second floor of Arena there are many places where you can eat. There are simple chunk-food places like Burger King and also some restaurants. If you are hungry you will find something for your taste for sure. Also you can buy beer if it is too hot outside :) Weather was very good for October – practically Estonian summer – 25C and over. Sessions I visited Here is the list of sessions I visited at DevReach 2012: DevReach 2012 Opening & Welcome Messsage with Martin Kulov and Stephen Forte Principled N-Tier Solution Design with Steve Smith Data Patterns for the Cloud with Brian Randell .NET Garbage Collection Performance Tips with Sasha Goldshtein Building Secured, Scalable, Low-latency Web Applications with the Windows Azure Platform with Ido Flatow It’s a Knockout! MVVM Style Web Applications with Charles Nurse Web Application Architecture – Lessons Learned from Adobe Brackets with Brian Rinaldi Demystifying Visual Studio 2012 Performance Tools with Martin Kulov SPvNext – A Look At All the Exciting And New Features In SharePoint with Sahil Malik Portable Libraries – Why You Should Care with Lino Tadros I missed some sessions because of some death march projects that are going and that I have to coordinate but it was not big loss as I had time to walk around in session venue neighborhood and see Sofia Business Park. Next year again! I will be there again next year and hopefully more guys from Estonia will join me. I think it’s good idea to take short vacation for DevReach time and do things like we did this time – Bucharest, Varna, Sofia. It’s only good idea to plan some more free time so we are not very much in hurry and also we have no work stuff to do on the trip. This far this trip has been one of best trips I have organized and I will go and meet all those guys in this region again! :)

  Read the article

• Editing sqlcmdvariable nodes in SSDT Publish Profile files using msbuild

  - by jamiet

  Publish profile files are a new feature of SSDT database projects that enable you to package up all environment-specific properties into a single file for use at publish time; I have written about them before at Publish Profile Files in SQL Server Data Tools (SSDT) and if it wasn’t obvious from that blog post, I’m a big fan! As I have used Publish Profile files more and more I have realised that there may be times when you need to edit those Publish profile files during your build process, you may think of such an operation as a kind of pre-processor step. In my case I have a sqlcmd variable called DeployTag, it holds a value representing the current build number that later gets inserted into a table using a Post-Deployment script (that’s a technique that I wrote about in Implementing SQL Server solutions using Visual Studio 2010 Database Projects – a compendium of project experiences – search for “Putting a build number into the DB”). Here are the contents of my Publish Profile file (simplified for demo purposes) : Notice that DeployTag defaults to “UNKNOWN”. On my current project we are using msbuild scripts to control what gets built and what I want to do is take the build number from our build engine and edit the Publish profile files accordingly. Here is the pertinent portion of the the msbuild script I came up with to do that:   <ItemGroup>     <Namespaces Include="myns">       <Prefix>myns</Prefix>       <Uri>http://schemas.microsoft.com/developer/msbuild/2003</Uri>     </Namespaces>   </ItemGroup>   <Target Name="UpdateBuildNumber">     <ItemGroup>       <SSDTPublishFiles Include="$(DESTINATION)\**\$(CONFIGURATION)\**\*.publish.xml" />     </ItemGroup>     <MSBuild.ExtensionPack.Xml.XmlFile Condition="%(SSDTPublishFiles.Identity) != ''"                                        TaskAction="UpdateElement"                                        File="%(SSDTPublishFiles.Identity)"                                        Namespaces="@(Namespaces)"                                         XPath="//myns:SqlCmdVariable[@Include='DeployTag']/myns:Value"                                         InnerText="$(BuildNumber)"/>   </Target> The important bits here are the definition of the namespace http://schemas.microsoft.com/developer/msbuild/2003: and the XPath expression //myns:SqlCmdVariable[@Include='DeployTag']/myns:Value: Some extra info: I use a fantastic tool called XMLPad to discover/test XPath expressions, read more at XMLPad – a new tool in my developer utility belt MSBuild.ExtensionPack.Xml.XmlFile is a msbuild task used to edit XML files and is available from Mike Fourie’s MSBuild Extension Pack I’m using a property called $(BuildNumber) to hold the value to substitute into the file and also $(DESTINATION)\**\$(CONFIGURATION)\**\*.publish.xml to define an ItemGroup all of my Publish Profile files. Populating those properties is basic msbuild stuff and is therefore outside the scope of this blog post however if you want to learn more check out MSBuild properties & How To: Use Wildcards to Build All Files in a Directory. Hope this is useful! @Jamiet

  Read the article

• eth0 and eth1 both assigned same IP on boot

  - by Banjer

  I have a physical SLES 11 SP2 server on a Sun Fire x4140 that is giving me problems with networking upon reboot. The NICs are onboard. The networking appears successful during boot, but network services such as nfs fail hard. This is because eth0 and eth1 are both receiving the same configuration and are both ifup-ed. Once everything times out and I'm at the console, ifconfig shows that eth0 and eth1 are UP and running with the same IP. Attempting to ping anything in that subnet fails. Restarting the network service fixes the issue. eth0 is the correct NIC that should be configured as primary, per the MAC address. Question: Whats causing eth1 to be brought up with the same config as eth0?? I do not have a config script set up for eth1: banjer@harp:~> ls -la /etc/sysconfig/network/ total 104 drwxr-xr-x 6 root root 4096 Jun 11 12:21 . drwxr-xr-x 6 root root 4096 Apr 10 09:46 .. -rw-r--r-- 1 root root 13916 Apr 10 09:32 config -rw-r--r-- 1 root root 9952 Apr 10 09:36 dhcp -rw------- 1 root root 180 Jun 11 12:21 ifcfg-eth0 -rw------- 1 root root 180 Jun 11 12:21 ifcfg-eth3 -rw------- 1 root root 172 Feb 1 08:32 ifcfg-lo -rw-r--r-- 1 root root 29333 Feb 1 08:32 ifcfg.template drwxr-xr-x 2 root root 4096 Apr 10 09:32 if-down.d -rw-r--r-- 1 root root 239 Feb 1 08:32 ifroute-lo drwxr-xr-x 2 root root 4096 Apr 10 09:33 if-up.d drwx------ 2 root root 4096 May 5 2010 providers -rw-r--r-- 1 root root 25 Nov 16 2010 routes drwxr-xr-x 2 root root 4096 Apr 10 09:36 scripts On a side note, eth3 is also configured with an IP in a different subnet, but this has not posed any problems. FYI the kernel module being used is forcedeth. banjer@harp:~> sudo cat /etc/sysconfig/network/ifcfg-eth0 BOOTPROTO='static' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='172.21.64.25/20' MTU='' NAME='MCP55 Ethernet' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' USERCONTROL='no' ONBOOT="yes" Here's eth3 in case you need to see it: banjer@harp:~> sudo cat /etc/sysconfig/network/ifcfg-eth3 BOOTPROTO='static' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='172.11.200.4/24' MTU='' NAME='MCP55 Ethernet' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' USERCONTROL='no' ONBOOT="yes" Perhaps is something related to udev? 70-persistent-net-rules looks OK to me, but I may not understand it completely. banjer@harp:~> cat /etc/udev/rules.d/70-persistent-net.rules # This file was automatically generated by the /lib/udev/write_net_rules # program, run by the persistent-net-generator.rules rules file. # # You can modify it, as long as you keep each rule on a single # line, and change only the value of the NAME= key. # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4c", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2" # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4a", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4b", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4d", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth3" # PCI device 0x1077:0x3032 (qla3xxx) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:c1:dd:0e:34:6c", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth4" Any other thoughts on what would cause this?

  Read the article

• Persistent static routes fail on MacOS 10.6.5 startup!

  - by verbalicious

  I'm unable to get static routes to persist a reboot on Mac OS 10.6.5. I've tried all of the methods prescribed in Google search results, and previous posts on this site. I've tried manually creating a launchd daemon, and used RouteSplit's launchd daemon to no avail. It's clear that the interface is not ready when these methods attempt to apply the route. This workstation in question is getting its IP from DHCP and probably hasn't gotten its DHCP lease when the command runs. We're able to apply the route by hand when logged in, but not through startup methods. Is there another way to apply this route by sneaking the command into something later, but before the login window appears to the user? Here is some relevant log info from system.log. You can see the "route: writing to routing socket: Network is unreachable" errors where my launchd script fires off. I've tried adding extra "sleep" and "ipconfig waitall" statements later in the script but this doesn't fly. Dec 15 19:30:41 localhost com.apple.launchd[1]: *** launchd[1] has started up. *** Dec 15 19:30:45 localhost mDNSResponder[18]: mDNSResponder mDNSResponder-258.13 (Oct 8 2010 17:10:30) starting Dec 15 19:30:47 localhost configd[15]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50) Dec 15 19:30:47 localhost configd[15]: DHCP en1: INIT transmit failed Dec 15 19:30:47 localhost configd[15]: network configuration changed. Dec 15 19:30:47 Administrators-MacBook-Pro configd[15]: setting hostname to "Administrators-MacBook-Pro.local" Dec 15 19:30:47 Administrators-MacBook-Pro blued[16]: Apple Bluetooth daemon started Dec 15 19:30:52 Administrators-MacBook-Pro syslog[67]: routes.sh: Starting RouteSplit Dec 15 19:30:53 Administrators-MacBook-Pro com.apple.usbmuxd[41]: usbmuxd-207 built for iTunesTenOne on Oct 19 2010 at 13:50:35, running 64 bit Dec 15 19:30:54 Administrators-MacBook-Pro /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[50]: Login Window Application Started Dec 15 19:30:55 Administrators-MacBook-Pro bootlog[61]: BOOT_TIME: 1292459441 0 Dec 15 19:30:55 Administrators-MacBook-Pro syslog[86]: routes.sh: static route 192.168.0.0/23 192.168.2.2 Dec 15 19:30:55 Administrators-MacBook-Pro net.routes.static[65]: route: writing to routing socket: Network is unreachable Dec 15 19:30:55 Administrators-MacBook-Pro net.routes.static[65]: add net 192.168.0.0: gateway 192.168.2.2: Network is unreachable Dec 15 19:30:57 Administrators-MacBook-Pro org.apache.httpd[38]: httpd: Could not reliably determine the server's fully qualified domain name, using Administrators-MacBook-Pro.local for ServerName Dec 15 19:30:58 Administrators-MacBook-Pro loginwindow[50]: Login Window Started Security Agent Dec 15 19:30:58 Administrators-MacBook-Pro WindowServer[89]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged. Dec 15 19:30:58 Administrators-MacBook-Pro com.apple.WindowServer[89]: Wed Dec 15 19:30:58 Administrators-MacBook-Pro.local WindowServer[89] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged. Dec 15 19:31:18 Administrators-MacBook-Pro configd[15]: network configuration changed. Dec 15 19:31:19 administrators-macbook-pro configd[15]: setting hostname to "administrators-macbook-pro.local" Dec 15 19:31:25 administrators-macbook-pro _mdnsresponder[121]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds Dec 15 19:31:25 administrators-macbook-pro _mdnsresponder[124]: sntp options: a=2 v=1 e=0.100 E=5.000 P=2147483647.000 Dec 15 19:31:25 administrators-macbook-pro _mdnsresponder[124]: d=15 c=5 x=0 op=1 l=/var/run/sntp.pid f= time.apple.com Dec 15 19:31:25 administrators-macbook-pro _mdnsresponder[124]: sntp: getaddrinfo(hostname, ntp) failed with nodename nor servname provided, or not known Dec 15 19:31:27 administrators-macbook-pro configd[15]: network configuration changed. Dec 15 19:31:27 Administrators-MacBook-Pro configd[15]: setting hostname to "Administrators-MacBook-Pro.local" Dec 15 19:31:27 Administrators-MacBook-Pro ntpd[37]: Cannot find existing interface for address 17.151.16.20 Dec 15 19:31:27 Administrators-MacBook-Pro ntpd_initres[125]: ntpd indicates no data available! Dec 15 19:31:31 Administrators-MacBook-Pro sshd[128]: USER_PROCESS: 133 ttys000 Dec 15 19:31:37 Administrators-MacBook-Pro sudo[138]: administrator : TTY=ttys000 ; PWD=/Users/administrator ; USER=root ; COMMAND=/usr/bin/less /var/log/system.log ``You can see the following line in /var/log/kernel.log that shows the en0 interface coming up: Dec 15 19:30:51 Administrators-MacBook-Pro kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, No flow-control, Debug [796d,0f01,0de1,0300,c1e1,3800]

  Read the article

• Oracle Fusion Applications User Experience Design Patterns: Feeling the Love after Launch

  - by mvaughan

  By Misha Vaughan, Oracle Applications User ExperienceIn the first video by the Oracle Applications User Experience team on the Oracle Partner Network, Vice President Jeremy Ashley said that Oracle is looking to expand the ecosystem of support for Oracle’s applications customers as they begin to assess their investment and adoption of Oracle Fusion Applications. Oracle has made a massive investment to maintain the benefits of the Fusion Applications User Experience. This summer, the Applications User Experience team released the Oracle Fusion Applications user experience design patterns.Design patterns help create consistent experiences across devices.The launch has been very well received:Angelo Santagata, Senior Principal Technologist and Fusion Middleware evangelist for Oracle,  wrote this to the system integrator community: “The web site is the result of many years of Oracle R&D into user interface design for Fusion Applications and features a really cool web app which allows you to visualise the UI components in action.”  Grant Ronald, Director of Product Management, Application Development Framework (ADF) said: “It’s a science I don't understand, but now I don't have to ... Now you can learn from the UX experience of Fusion Applications.”Frank Nimphius, Senior Principal Product Manager, Oracle (ADF) wrote about the launch of the design patterns for the ADF Code Corner, and Jürgen Kress, Senior Manager EMEA Alliances & Channels for Fusion MiddleWare and Service Oriented Architecture, (SOA), shared the news with his Partner Community. Oracle Twitter followers also helped spread the message about the design patterns launch: ?@bex – Brian Huff, founder and Chief Software Architect for Bezzotech, and Oracle ACE Director:“Nifty! The Oracle Fusion UX team just released new ADF design patterns.”@maiko_rocha, Maiko Rocha, Oracle Consulting Solutions Architect and Oracle FMW engineer: “Haven't seen any other vendor offer such comprehensive UX Design Patterns catalog for free!”@zirous_chad, Chad Thompson, Senior Solutions Architect for Zirous, Inc. and ADF Developer:Wow - @ultan and company did a great job with the Fusion UX PatternsWhat is a user experience design pattern?A user experience design pattern is a re-usable, usability tested functional blueprint for a particular user experience.  Some examples are guided processes, shopping carts, and search and search results.  Ultan O’Broin discusses the top design patterns every developer should know.The patterns that were just released are based on thousands of hours of end-user field studies, state-of-the-art user interface assessments, and usability testing.  To be clear, these are functional design patterns, not technical design patterns that developers may be used to working with.  Because we know there is a gap, we are putting together some training that will help close that gap.Who should care?This is an offering targeted primarily at Application Development Framework (ADF) developers. If you are faced with the following questions regarding Fusion Applications, you will want to know and learn more:•    How do I build something that looks like Fusion Applications?•    How do I build a next-generation application?•    How do I extend a Fusion Application and maintain the user experience?•    I don’t want to re-invent the wheel on the user interface, so where do I start?•    I need to build something that will eventually co-exist with Fusion Applications. How do I do that?These questions are relevant to partners with an ADF competency, individual practitioners, or small consultancies with an ADF specialization, and customers who are trying to shift their IT staff over to supporting Fusion Applications.Where you can find out more?OnlineOur Fusion User Experience design patterns maven is Ultan O’Broin. The Oracle Partner Network is helping our team bring this first e-seminar to you in order to go into a more detail on what this means and how to take advantage of it:? Webinar: Build a Better User Experience with Oracle: Oracle Fusion Applications Functional Design PatternsSept 20, 2012 , 10:30am-11:30am PacificDial-In:  1. 877-664-9137 / Passcode 102546?International:  706-634-9619  http://www.intercall.com/national/oracleuniversity/gdnam.htmlAccess the Live Event Or Via Webconference Access http://ouweb.webex.com  ?and enter this session number: 598036234At a Usergroup eventThe Fusion User Experience Advocates (FXA) are also going to be getting some deep-dive training on this content and can share it with local user groups.At OpenWorld Ultan O’Broin               Chris MuirIf you will be at OpenWorld this year, our own Ultan O’Broin will be visiting the ADF demopod to say hello, thanks to Shay Shmeltzer, Senior Group Manager for ADF outbound communication and at the OTN lounge: Monday 10-10:45, Tuesday 2:15-2:45, Wednesday 2:15-3:30 ?  Oracle JDeveloper and Oracle ADF,  Moscone South, Right - S-207? “ADF Meet and Greett”, OTN Lounge, Wednesday 4:30 And I cannot talk about OpenWorld and ADF without mentioning Chris Muir’s ADF EMG event: the Year After the Year Of the ADF Developer – Sunday, Sept 30 of OpenWorld. Chris has played host to Ultan and the Applications user experience message for his online community and is now a seasoned UX expert.Expect to see additional announcements about expanded and training on similar topics in the future.

  Read the article

• Common business drivers that lead to creating and sustaining a project

  Common business drivers that lead to creating and sustaining a project include and are not limited to: cost reduction, increased return on investment (ROI), reduced time to market, increased speed and efficiency, increased security, and increased interoperability. These drivers primarily focus on streamlining and reducing cost to make a company more profitable with less overhead. According to Answers.com cost reduction is defined as reducing costs to improve profitability, and may be implemented when a company is having financial problems or prevent problems. ROI is defined as the amount of value received relative to the amount of money invested according to PayperclickList.com.  With the ever increasing demands on businesses to compete in today’s market, companies are constantly striving to reduce the time it takes for a concept to become a product and be sold within the global marketplace. In business, some people say time is money, so if a project can reduce the time a business process takes it in fact saves the company which is always good for the bottom line. The Social Security Administration states that data security is the protection of data from accidental or intentional but unauthorized modification, destruction. Interoperability is the capability of a system or subsystem to interact with other systems or subsystems. In my personal opinion, these drivers would not really differ for a profit-based organization, compared to a non-profit organization. Both corporate entities strive to reduce cost, and strive to keep operation budgets low. However, the reasoning behind why they want to achieve this does contrast. Typically profit based organizations strive to increase revenue and market share so that the business can grow. Alternatively, not-for-profit businesses are more interested in increasing their reach within communities whether it is to increase annual donations or invest in the lives of others. Success or failure of a project can be determined by one or more of these drivers based on the scope of a project and the company’s priorities associated with each of the drivers. In addition, if a project attempts to incorporate multiple drivers and is only partially successful, then the project might still be considered to be a success due to how close the project was to meeting each of the priorities. Continuous evaluation of the project could lead to a decision to abort a project, because it is expected to fail before completion. Evaluations should be executed after the completion of every software development process stage. Pfleeger notes that software development process stages include: Requirements Analysis and Definition System Design Program Design Program Implementation Unit Testing Integration Testing System Delivery Maintenance Each evaluation at every state should consider all the business drivers included in the scope of a project for how close they are expected to meet expectations. In addition, minimum requirements of acceptance should also be included with the scope of the project and should be reevaluated as the project progresses to ensure that the project makes good economic sense to continue. If the project falls below these benchmarks then the project should be put on hold until it does make more sense or the project should be aborted because it does not meet the business driver requirements.   References Cost Reduction Program. (n.d.). Dictionary of Accounting Terms. Retrieved July 19, 2009, from Answers.com Web site: http://www.answers.com/topic/cost-reduction-program Government Information Exchange. (n.d.). Government Information Exchange Glossary. Retrieved July 19, 2009, from SSA.gov Web site: http://www.ssa.gov/gix/definitions.html PayPerClickList.com. (n.d.). Glossary Term R - Pay Per Click List. Retrieved July 19, 2009, from PayPerClickList.com Web site: http://www.payperclicklist.com/glossary/termr.html Pfleeger, S & Atlee, J.(2009). Software Engineering: Theory and Practice. Boston:Prentice Hall Veluchamy, Thiyagarajan. (n.d.). Glossary « Thiyagarajan Veluchamy’s Blog. Retrieved July 19, 2009, from Thiyagarajan.WordPress.com Web site: http://thiyagarajan.wordpress.com/glossary/

  Read the article

• Extending QuickBooks Reporting with the QuickBooks ADO.NET Data Provider

  - by dataintegration

  The ADO.NET Provider for QuickBooks comes with several reports you may request from QuickBooks by default. However, there are many more that are not readily available. The ADO.NET Provider for QuickBooks makes it easy for you to create new reports and customize existing ones. In this article, we will illustrate how to create your own report and retrieve it from the Server Explorer in Visual Studio. For this example we will show how to create an Item Profitability Report. Creating the report script file Step 1: Download the sample reports available here. Extract them to a folder of your choice. Step 2: Make a copy of the ReportGeneralSummary.rsd file and rename it to ItemProfitability.rsd. Then open the file in any text editor. Step 3: Open the installation directory of the ADO.NET Provider for QuickBooks. Under the \db\ folder, locate the ReportJob.rsb file. Open this file in another text editor. Note: Although we are using ReportJob.rsb for this example, other reports may be contained in other Report*.rsb files. We recommend consulting the included help file and first locating the Report stored procedure and ReportType you are looking for. Otherwise, you may open each Report*.rsb file and look under the "reporttype" input for the report you are attempting to create. Step 4: First, let's rename the title of ItemProfitability.rsd. Near the top of the file you will see a title and description. Change the title to match the name of the file. Change the description to anything you like. For example: <rsb:info title="ItemProfitability" description="Executes my custom report."> Just below the Title, there are a number of columns. The Id represents the row number. The RowType represents the type of data returned by QuickBooks. The ColumnValue* columns represent all of the column data returned by QuickBooks. In some instances, we may need to add additional ColumnValue columns. Step 5: To add additional ColumnValue columns, simply copy the last column, paste it directly below, and continue increasing the numerical value at end of the attribute name. For example: <attr name="ColumnValue9" xs:type="string" readonly="true" required="false" desc="Represents a column of data."/> <attr name="ColumnValue10" xs:type="string" readonly="true" required="false" desc="Represents a column of data."/> <attr name="ColumnValue11" xs:type="string" readonly="true" required="false" desc="Represents a column of data."/> <attr name="ColumnValue12" xs:type="string" readonly="true" required="false" desc="Represents a column of data."/> ... Caution: Do not rename the ColumnValue* definitions themselves. They are generalized so that we can understand each type of report returned by QuickBooks. Renaming them to something other than ColumnValue* will cause your columns to return with null values. Step 6: Now let's update the available inputs for the table. From the ReportJob.rsb file, copy all of the input elements into ItemProfitability under the "Psuedo-Column definitions" comment. You will be replacing the existing input elements in ItemProfitability with inputs from ReportJob. When you are done, it should look like this: <!-- Psuedo-Column definitions --> <input name="reporttype" description="The type of the report." value="ITEMESTIMATESVSACTUALS,ITEMPROFITABILITY,JOBESTIMATESVSACTUALSDETAIL,JOBESTIMATESVSACTUALSSUMMARY,JOBPROFITABILITYDETAIL,JOBPROFITABILITYSUMMARY," default="ITEMESTIMATESVSACTUALS" /> <input name="reportperiod" description="Report date range in the format (fromdate:todate), and either value may be omitted for an open ended range (e.g. 2009-12-25:). Supported date format: yyyy-MM-dd." /> <input name="reportdaterangemacro" description="Use a predefined date range." value="ALL,TODAY,THISWEEK,THISWEEKTODATE,THISMONTH,THISMONTHTODATE,THISQUARTER,THISQUARTERTODATE,THISYEAR,THISYEARTODATE,YESTERDAY,LASTWEEK,LASTWEEKTODATE,LASTMONTH,LASTMONTHTODATE,LASTQUARTER,LASTQUARTERTODATE,LASTYEAR,LASTYEARTODATE,NEXTWEEK,NEXTFOURWEEKS,NEXTMONTH,NEXTQUARTER,NEXTYEAR," default="ALL" /> ... Step 7: Now let's update the operationname attribute. This needs to match the same operationname used by ReportJob. After you have copied the correct value from ReportJob.rsb, the operationname in ItemProfitability should look like so: <rsb:set attr="operationname" value="qbReportJob"/> Step 8: There is one more thing we can do to make this a true Item Profitability report. We can remove the reporttype input and hardcode the value. To do this, copy and paste the rsb:set used for operationname. Then rename the attr and value to match the name and value you want to use. For example: <rsb:set attr="operationname" value="qbReportJob"/> <rsb:set attr="reporttype" value="ITEMPROFITABILITY"/> After this you can remove the input for reporttype. Now that you have your own report file, we can move on to displaying the report in the Visual Studio server explorer. Accessing the report through the Data Provider Step 1: Open Visual Studio. In the Server Explorer, configure a new connection with the QuickBooks Data Provider. Step 2: For the Location connection string property, enter the directory where the new report has been saved to. Step 3: The new report should appear as a new view in the Server Explorer. Let's retrieve data from it. Step 4: You can specify any inputs in the WHERE clause. New Report Example Script To help you get started using this new QuickBooks Data Provider report, you will need to download the QuickBooks ADO.NET Data Provider and the fully functional sample script.

  Read the article

• 30 Steps to Master ASP.NET MVC Application development

  - by Rajesh Pillai

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 st1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Welcome Readers!,   I am starting out a new series on ASP.NET  MVC skill building which will be posted over the next couple of weeks.  Let me know your thoughts on the content, which I have planned and a couple of them has been taken from ASP.NET MVC2 Cookbook. (NOTE: Only the heading has been taken, the content will be not :)).   Do let me know what you would like to see, or any additional inputs or ideas to cover in this topics.  The 30 steps are oultined below for quick reference.  Will start filling this out quickly.   Outlined is the ‘30’ step to master ASP.NET MVC.   A Peek Into Model What is a model? Different types of model Presentation/ViewModel Model Mapping (AutoMapper)   A Peak into View How view works in ASP.NET MVC? View Engine Design Custom View Engine View Best Practices Templated Helpers Partial Views   A Peak into Controller Introduction Controller Design Controller Best Practices Asynchronous Controller Custom Action Result Action Filters Controller Factory to use with IOC   Routes Explanation Routes from the database Routes from XML More complex routing   Master Pages Basics Setting Master Page Dynamically   Working with data in the view Repeating Views Array of check boxes Array of radio buttons Paged data CRUD Client side action Confirmation Dialog (modal window) jqGrid   Working with Forms   Validation Model Validation with DataAnnotations Using the xVal validation framework Client side validation with jQuery Validation Fluent Validation Model Binders   Templating Create strongly typed helper using T4 Custom View Templates with T4 Create custom MVC project template using T4   IOC AutoFac Ninject Unity Application   Areas   jQuery, Ajax and jQuery Plugins   State Maintenance Application State User state Cookies Webfarm   Error Handling View error handling Controller error handling ELMAH (Error Logging Modules and Handlers)   Authentication and Authorization User Registration form SignOn Process Password Reminder Membership and Roles Windows authentication Restricting access to all pages Restricting access to selected pages Restricting access to pages by role Restricting access to a controller Restricting access to selected area   Profiles and Themes Using Profiles Inheriting a Profile Migrating an anonymous profile Creating custom themes Using themes User personalized themes   Configuration Adding custom application settings in web.config Displaying custom error messages Accessing other web.config configuration elements Adding custom configuration elements to web.config Encrypting web.config sections   Tracing, Debugging and Logging   Caching Caching a whole page Caching pages based on route details Caching pages based on browser type and version Caching pages based custom strings Caching partial pages Caching application data Object Caching Using Microsoft Velocity Using MemCache Using AppFabric cache   Localization   HTTP Handlers and Modules   Security XSS/CSRF AnitForgery Encoding   HtmlHelpers Strongly typed helpers Writing custom helpers   Repository Pattern (Data access)   WF/WCF   Unit Testing   Mocking Framework   Integration Testing   Load / Performance Testing   Deployment    Once again let me know your thoughts on this.   Till then, Enjoy MVC'ing!!!

  Read the article

• SUPINFO International University in Mauritius

  Since a while I'm considering to pick up my activities as a student and I'd like to get a degree in Computer Science. Personal motivation I mean after all this years as a professional software (and database) developer I have the personal urge to complete this part of my education. Having various certifications by Microsoft and being awarded as an Microsoft Most Valuable Professional (MVP) twice looks pretty awesome on a resume but having a "proper" degree would just complete my package. During the last couple of years I already got in touch with C-SAC (local business school with degree courses), the University of Mauritius and BCS, the Chartered Institute for IT to check the options to enroll as an experienced software developer. Quite frankly, it was kind of alienating to receive that feedback: Start from scratch! No seriously? Spending x amount of years to sit for courses that might be outdated and form part of your daily routine? Probably being in an awkward situation in which your professional expertise might exceed the lecturers knowledge? I don't know... but if that's path to walk... Well, then I might have to go for it. SUPINFO International University Some weeks ago I was contacted by the General Manager, Education Recruitment and Development of Medine Education Village, Yamal Matabudul, to have a chat on how the local IT scene, namely the Mauritius Software Craftsmanship Community (MSCC), could assist in their plans to promote their upcoming campus. Medine went into partnership with the French-based SUPINFO International University and Mauritius will be the 36th location world-wide for SUPINFO. Actually, the concept of SUPINFO is very likely to the common understanding of an apprenticeship in Germany. Not only does a student enroll into the programme but will also be placed into various internships as part of the curriculum. It's a big advantage in my opinion as the person stays in touch with the daily procedures and workflows in the real world of IT. Statements like "We just received a 'crash course' of information and learned new technology which is equivalent to 1.5 months of lectures at the university" wouldn't form part of the experience of such an education. Open Day at the Medine Education Village Last Saturday, Medine organised their Open Day and it was the official inauguration of the SUPINFO campus in Mauritius. It's now listed on their website, too - but be warned, the site is mainly in French language although the courses are all done in English. Not only was it a big opportunity to "hang out" on the campus of Medine but it was great to see the first professional partners for their internship programme, too. Oh, just for the records, IOS Indian Ocean Software Ltd. will also be among the future employers for SUPINFO students. More about that in an upcoming blog entry. Open Day at Medine Education Village - SUPINFO International University in Mauritius Mr Alick Mouriesse, President of SUPINFO, arrived the previous day and he gave all attendees a great overview of the roots of SUPINFO, the general development of the educational syllabus and their high emphasis on their partnerships with local IT companies in order to assist their students to get future jobs but also feel the heartbeat of technology live. Something which is completely missing in classic institutions of tertiary education in Computer Science. And since I was on tour with my children, as usual during weekends, he also talked about the outlook of having a SUPINFO campus in Mauritius. Apart from the close connection to IT companies and providing internships to students, SUPINFO clearly works on an international level. Meaning students of SUPINFO can move around the globe and can continue their studies seamlessly. For example, you might enroll for your first year in France, then continue to do 2nd and 3rd year in Canada or any other country with a SUPINFO campus to earn your bachelor degree, and then live and study in Mauritius for the next 2 years to achieve a Master degree. Having a chat with Dale Smith, Expand Technologies, after his interesting session on Technological Entrepreneurship - TechPreneur More questions by other craftsmen of the Mauritius Software Craftsmanship Community And of course, this concept works in any direction, giving Mauritian students a huge (!) opportunity to live, study and work abroad. And thanks to this, Medine already announced that there will be new facilities near Cascavelle to provide dormitories and other facilities to international students coming to our island. Awesome! Okay, but why SUPINFO? Well, coming back to my original statement - I'd like to get a degree in Computer Science - SUPINFO has a process called Validation of Acquired Experience (VAE) which is tailor-made for employees in the field of IT, and allows you to enroll in their course programme. I already got in touch with their online support chat but was only redirected to some FAQs on their website, unfortunately. So, during the Open Day I seized the opportunity to have an one-on-one conversation with Alick Mouriesse, and he clearly encouraged me to gather my certifications and working experience. SUPINFO does an individual evaluation prior to their assignment regarding course level, and hopefully my chances of getting some modules ahead of studies are looking better than compared to the other institutes. Don't get me wrong, I don't want to go down the easy route but why should someone sit for "Database 101" or "Principles of OOP" when applying and preaching database normalisation and practicing Clean Code Developer are like flesh and blood? Anyway, I'll be off to get my transcripts of certificates together with my course assignments from the old days at the university. Yes, I studied Applied Chemistry for a couple of years before intersecting into IT and software development particularly... ;-)

  Read the article

• Partner Webcast: Innovation in Products - October 1st, 2012 at 04:00 PM CET (03:00 PM GMT) Program

  - by Richard Lefebvre

  I am pleased to invite you to join the Innovations in Products – webcast. Innovations in Products will present Oracle Product's new functions and features including sales positioning. The key objectives of these webcasts are to inspire System Integrator's implementation personnel to conduct successful after sales in their Customer projects. Innovations in Products will be presented on the 1st Monday of each quarter after the billable day (4:00 to 5:00 PM CET). The webcast is intended for System Integrator's Implementation Certified Specialists but Innovations in Products is open for other system Integrator's personnel as well. At first, two Oracle representatives will discuss Oracle's contribution to partners. Then you will see product breakout session followed by Q&A with Oracle Experts. Each session will last for maximum 1 hour. A Q&A document covering all questions and answers will be made available after the webcast. What are the Benefits for partners? Find out how Innovations in Products helps you to improve your after sales Discover new functions and features so you can enrich your Customers's solution Learn more about Oracle products, especially sales positioning Hear crucial questions raised by colleague alike, learn from their interest Engage and present your questions to subject experts Be inspired of the richness of Oracle's product portfolio – for your and your customer's benefit. Note: Should you already be familiar with a specific Product, then choose another one. Doing so you would expand your knowledge of the overall product portfolio. Some presentations contain product demonstration, although these presentations are not intended to be extremely detailed technical presentations. Product breakout sessions available on October 1st:   Topics Speaker To Register Fusion HCM Social Capabilities, Enterprise social capabilities embedded in how you run your business Anca Dumitru, HCM Presales Consultant, EMEA Presales Center CLICK HERE Oracle Fusion Applications Security Concepts, Overview Alexandra Dan, Applications Technology Presales Consultant, EMEA Presales Centre CLICK HERE Fusion Financials Overview - Focus on Fusion Payables, Meeting the Payables' Challenges Elena Nita, Senior ERP Sales Consultant, EMEA Presales Center CLICK HERE Introduction to Oracle RightNow CX, Empowering companies to engage directly with their customers through great Social, Web, Chat and Contact Center experiences. Cais Champsi, Presales Consultant, EMEA Presales Centre CLICK HERE Oracle Endeca Information Discovery, Product Overview Emma Palii, BI Sales Consultant, EMEA Presales Center CLICK HERE To access previously presented 23 Applications Products presentations and 6 Public Sector Value Proposition presentations, please click here. You might want to bookmark the overall registration page Innovations in Products October 1st and the global event calendar page events.oracle.com. Delivery Format Innovations in Products – program is a series of FREE prerecorded Oracle product presentations followed by Q&A. It will be delivered over the Web. Participants have the opportunity to submit questions during the web cast via chat and subject matter experts will provide verbal answers live. Innovations in Products consists of several parallel prerecorded product breakout sessions, each lasting for max. 1 hour. At first, two Oracle representatives will discuss Oracle's contribution to Partners. Then you'll see the product breakout sessions followed by Q&A with Oracle Experts. A Q&A document covering all questions and answers will be made available after the webcast. You can also see Innovations in Products afterwards as its content will be available online for the next 6-12 months. The next Innovations in Products web casts will be presented as follows: October 1st 2012 January 14th 2013 April 8th 2013. Note: Depending on local network bandwidth please allow some seconds time the presentations to download. You might want to refresh your screen by pressing F5. Duration: Maximum 1 hour For further information please contact me Markku Rouhiainen. Best regards Markku Rouhiainen Director, Applications Partner Enablement EMEA

  Read the article

• Trace File Source Adapter

  The Trace File Source adapter is a useful addition to your SSIS toolbox.  It allows you to read 2005 and 2008 profiler traces stored as .trc files and read them into the Data Flow.  From there you can perform filtering and analysis using the power of SSIS. There is no need for a SQL Server connection this just uses the trace file. Example Usages Cache warming for SQL Server Analysis Services Reading the flight recorder Find out the longest running queries on a server Analyze statements for CPU, memory by user or some other criteria you choose Properties The Trace File Source adapter has two properties, both of which combine to control the source trace file that is read at runtime. SQL Server 2005 and SQL Server 2008 trace files are supported for both the Database Engine (SQL Server) and Analysis Services. The properties are managed by the Editor form or can be set directly from the Properties Grid in Visual Studio. Property Type Description AccessMode Enumeration This property determines how the Filename property is interpreted. The values available are: DirectInput Variable Filename String This property holds the path for trace file to load (*.trc). The value is either a full path, or the name of a variable which contains the full path to the trace file, depending on the AccessMode property. Trace Column Definition Hopefully the majority of you can skip this section entirely, but if you encounter some problems processing a trace file this may explain it and allow you to fix the problem. The component is built upon the trace management API provided by Microsoft. Unfortunately API methods that expose the schema of a trace file have known issues and are unreliable, put simply the data often differs from what was specified. To overcome these limitations the component uses  some simple XML files. These files enable the trace column data types and sizing attributes to be overridden. For example SQL Server Profiler or TMO generated structures define EventClass as an integer, but the real value is a string. TraceDataColumnsSQL.xml  - SQL Server Database Engine Trace Columns TraceDataColumnsAS.xml    - SQL Server Analysis Services Trace Columns The files can be found in the %ProgramFiles%\Microsoft SQL Server\100\DTS\PipelineComponents folder, e.g. "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsSQL.xml" "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml" If at runtime the component encounters a type conversion or sizing error it is most likely due to a discrepancy between the column definition as reported by the API and the actual value encountered. Whilst most common issues have already been fixed through these files we have implemented specific exception traps to direct you to the files to enable you to fix any further issues due to different usage or data scenarios that we have not tested. An example error that you can fix through these files is shown below. Buffer exception writing value to column 'Column Name'. The string value is 999 characters in length, the column is only 111. Columns can be overridden by the TraceDataColumns XML files in "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml". Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Trace File Source transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations. Please note that the Microsoft Trace classes used in the component are not supported on 64-bit platforms. To use the Trace File Source on a 64-bit host you need to ensure you have the 32-bit (x86) tools available, and the way you execute your package is setup to use them, please see the help topic 64-bit Considerations for Integration Services for more details. Downloads Trace Sources for SQL Server 2005 -- Trace Sources for SQL Server 2008 Version History SQL Server 2008 Version 2.0.0.382 - SQL Sever 2008 public release. (9 Apr 2009) SQL Server 2005 Version 1.0.0.321 - SQL Server 2005 public release. (18 Nov 2008) -- Screenshots

  Read the article

• WebGrid Helper and Complex Types

  - by imran_ku07

      Introduction:           WebGrid helper makes it very easy to show tabular data. It was originally designed for ASP.NET Web Pages(WebMatrix) to display, edit, page and sort tabular data but you can also use this helper in ASP.NET Web Forms and ASP.NET MVC. When using this helper, sometimes you may run into a problem if you use complex types in this helper. In this article, I will show you how you can use complex types in WebGrid helper.       Description:             Let's say you need to show the employee data and you have the following classes,   public class Employee { public string Name { get; set; } public Address Address { get; set; } public List<string> ContactNumbers { get; set; } } public class Address { public string City { get; set; } }               The Employee class contain a Name, an Address and list of ContactNumbers. You may think that you can easily show City in WebGrid using Address.City, but no. The WebGrid helper will throw an exception at runtime if any Address property is null in the Employee list. Also, you cannot directly show ContactNumbers property. The easiest way to show these properties is to add some additional properties,   public Address NotNullableAddress { get { return Address ?? new Address(); } } public string Contacts { get { return string.Join("; ",ContactNumbers); } }               Now you can easily use these properties in WebGrid. Here is the complete code of this example,  @functions{ public class Employee { public Employee(){ ContactNumbers = new List<string>(); } public string Name { get; set; } public Address Address { get; set; } public List<string> ContactNumbers { get; set; } public Address NotNullableAddress { get { return Address ?? new Address(); } } public string Contacts { get { return string.Join("; ",ContactNumbers); } } } public class Address { public string City { get; set; } } } @{ var myClasses = new List<Employee>{ new Employee { Name="A" , Address = new Address{ City="AA" }, ContactNumbers = new List<string>{"021-216452","9231425651"}}, new Employee { Name="C" , Address = new Address{ City="CC" }}, new Employee { Name="D" , ContactNumbers = new List<string>{"045-14512125","21531212121"}} }; var grid = new WebGrid(source: myClasses); } @grid.GetHtml(columns: grid.Columns( grid.Column("NotNullableAddress.City", header: "City"), grid.Column("Name"), grid.Column("Contacts")))                    Summary:           You can use WebGrid helper to show tabular data in ASP.NET MVC, ASP.NET Web Forms and  ASP.NET Web Pages. Using this helper, you can also show complex types in the grid. In this article, I showed you how you use complex types with WebGrid helper. Hopefully you will enjoy this article too.  

  Read the article

• reiserfsck on lvm

  - by DaDaDom

  It seems like my filesystem got corrupted somehow during the last reboot of my server. I can't fsck some logical volumes anymore. The setup: root@rescue ~ # cat /mnt/rescue/etc/fstab proc /proc proc defaults 0 0 /dev/md0 /boot ext3 defaults 0 2 /dev/md1 / ext3 defaults,errors=remount-ro 0 1 /dev/systemlvm/home /home reiserfs defaults 0 0 /dev/systemlvm/usr /usr reiserfs defaults 0 0 /dev/systemlvm/var /var reiserfs defaults 0 0 /dev/systemlvm/tmp /tmp reiserfs noexec,nosuid 0 2 /dev/sda5 none swap defaults,pri=1 0 0 /dev/sdb5 none swap defaults,pri=1 0 0 [UPDATE] First question: what "part" should I check for bad blocks? The logical volume, the underlying /dev/md or the /dev/sdx below that? Is doing what I am doing the right way to go? [/UPDATE] The errormessage when checking /dev/systemlvm/usr: root@rescue ~ # reiserfsck /dev/systemlvm/usr reiserfsck 3.6.19 (2003 www.namesys.com) [...] Will read-only check consistency of the filesystem on /dev/systemlvm/usr Will put log info to 'stdout' Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes ########### reiserfsck --check started at Wed Feb 3 07:10:55 2010 ########### Replaying journal.. Reiserfs journal '/dev/systemlvm/usr' in blocks [18..8211]: 0 transactions replayed Checking internal tree.. Bad root block 0. (--rebuild-tree did not complete) Aborted Well so far, let's try --rebuild-tree: root@rescue ~ # reiserfsck --rebuild-tree /dev/systemlvm/usr reiserfsck 3.6.19 (2003 www.namesys.com) [...] Will rebuild the filesystem (/dev/systemlvm/usr) tree Will put log info to 'stdout' Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes Replaying journal.. Reiserfs journal '/dev/systemlvm/usr' in blocks [18..8211]: 0 transactions replayed ########### reiserfsck --rebuild-tree started at Wed Feb 3 07:12:27 2010 ########### Pass 0: ####### Pass 0 ####### Loading on-disk bitmap .. ok, 269716 blocks marked used Skipping 8250 blocks (super block, journal, bitmaps) 261466 blocks will be read 0%....20%....40%....60%....80%....100% left 0, 11368 /sec 52919 directory entries were hashed with "r5" hash. "r5" hash is selected Flushing..finished Read blocks (but not data blocks) 261466 Leaves among those 13086 Objectids found 53697 Pass 1 (will try to insert 13086 leaves): ####### Pass 1 ####### Looking for allocable blocks .. finished 0% left 12675, 0 /sec The problem has occurred looks like a hardware problem (perhaps memory). Send us the bug report only if the second run dies at the same place with the same block number. mark_block_used: (39508) used already Aborted Bad. But let's do it again as mentioned: [...] Flushing..finished Read blocks (but not data blocks) 261466 Leaves among those 13085 Objectids found 54305 Pass 1 (will try to insert 13085 leaves): ####### Pass 1 ####### Looking for allocable blocks .. finished 0%... left 12127, 958 /sec The problem has occurred looks like a hardware problem (perhaps memory). Send us the bug report only if the second run dies at the same place with the same block number. build_the_tree: Nothing but leaves are expected. Block 196736 - internal Aborted Same happens every time, only the actual error message changes. Sometimes I get mark_block_used: (somenumber) used already, other times the block number changes. Seems like something is REALLY broken. Are there any chances I can somehow get the partitions to work again? It's a server to which I don't have physical access directly (hosted server). Thanks in advance!

  Read the article

• IIS not starting: The process cannot access the file because it is being used by another process

  - by Rick Strahl

  Ok, apparently a few people knew about this issue, but it is new to me and has caused me nearly an hour to track down today. What happened is that I’ve been working all day doing some final pre-deployment testing of several tools on my local dev machine. In the process I’ve been starting and stopping several IIS 7 Web sites. At some point I was done and just wanted to start my Default Web Site again and found this  little gem of an error message popping up: The process cannot access the file because it is being used by another process. (Exception from HRESULT: 0x80070020) A lot of headless running around ensued after this, trying to figure out why IIS wouldn’t start. Oddly some sites started right up, others didn’t. I killed INetInfo, all worker processes, tried IISReset a million times and even rebooted – all to no avail. What gives? Skype, you evil Bastard! As it turns out the culprit is – drum roll please - Skype!  What, you may ask, does Skype have to do with IIS and Web Requests? It looks like recent versions of Skype have an option to run over Port 80 and 443 to allow running over corporate firewalls. Which is actually a nice feature that lets Skype work just about anywhere. What’s not so cool is that IIS fails to start up when another application is already using the same port that a Web site is mapped to. In the case of my dev site that’d be port 80 and Skype was hogging it. To fix this issue you can stop Skype from using port 80 and 443 which quickly fixes the problem. Or stop Skype. Duh! To permanently fix the problem in Skype find the option on the Options | Connection tab and uncheck the Use port 80/443 option: Oddly I haven’t run into this problem even though my setup hasn’t changed in quite some time. It appears that it’s bad startup timing that causes this problem to occur. Whatever the circumstance was, Skype somehow ended up starting before IIS.  If Skype is started after IIS has started it will automatically opt for other ports and not use port 80 and so there’s no problem. It’s easy to demonstrate this behavior if you’re looking for it: Stop IIS Stop Skype Start Skype and make a test call Start IIS And voila your error is ready for you! This really shouldn’t be a problem except that it would be really nice if IIS could give a more helpful error message when it can fire up a site because a port is blocked. “The process cannot access a file” is really not a very helpful error message in this scenario… I/O port / file ah what the heck it’s all the same to Windows. Right! I’ve run into this situation quite a bit with other, albeit more obvious applications like running Apache on the local machine for testing and then trying to run an IIS application. Same situation,  although it’s been a while – pre IIS 7 and I think previous versions of IIS actually gave more useful error messages for port blockages and that would be helpful. On the way to figuring this out I ran into some pretty humorous forum posts though with people ragging on why the hell you would be running IIS. Or Skype. The misinformed paranoia police out in full force so to say :-). It’ll be nice to start running IIS Express once Visual Studio 2010 SP1 gets released. Anyway, no surprise that Skype didn’t jump out at me as the culprit right away and I was left fumbling for a while until the Internet came to the rescue. I’m not the first to have found this for sure – I posted a message on Twitter and dozens of people replied they’d run into this before as well. Seems worth mentioning again though – since I’m sure to forget that this happened in a year from now when I hit that same error. Maybe I’ll even find this blog post to remind me…© Rick Strahl, West Wind Technologies, 2005-2011Posted in IIS7  Windows  

  Read the article

• About Me

  - by Jeffrey West

  I’m new to blogging.  This is the second blog post that I have written, and before I go too much further I wanted the readers of my blog to know a bit more about me… Kid’s Stuff By trade, I am a programmer (or coder, developer, engineer, architect, etc).  I started programming when I was 12 years old.  When I was 7, we got our first ‘family’ computer – an Apple IIc.  It was great to play games on, and of course what else was a 7-year-old going to do with it.  I did have one problem with it, though.  When I put in my 5.25” floppy to play a game, sometimes, instead loading my game I would get a mysterious ‘]’ on the screen with a flashing cursor.  This, of course, was not my game.  Much like the standard ‘Microsoft fix’ is to reboot, back then you would take the floppy out, shake it, and restart the computer and pray for a different result. One day, I learned at school that I could topple my nemesis – the ‘]’ and flashing cursor – by typing ‘load’ and pressing enter.  Most of the time, this would load my game and then I would get to play.  Problem solved.  However, I began to wonder – what else can I make it do? When I was in 5th grade my dad got a bright idea to buy me a Tandy 1000HX.  He didn’t know what I was going to do with it, and neither did I.  Least of all, my mom wasn’t happy about buying a 5th grader a $1,000 computer.  Nonetheless, Over time, I learned how to write simple basic programs out of the back of my Math book: 10 x=5 20 y=6 30 PRINT x+y That was fun for all of about 5 minutes.  I needed more – more challenges, more things that I could make the computer do.  In order to quench this thirst my parents sent me to National Computer Camps in Connecticut.  It was one of the best experiences of my childhood, and I spent 3 weeks each summer after that learning BASIC, Pascal, Turbo C and some C++.  There weren’t many kids at the time who knew anything about computers, and lets just say my knowledge of and interest in computers didn’t score me many ‘cool’ points.  My experiences at NCC set me on the path that I find myself on now, and I am very thankful for the experience.  Real Life I have held various positions in the past at different levels within the IT layer cake.  I started out as a Software Developer for a startup in the Dallas, TX area building software for semiconductor testing statistical process control and sampling.  I was the second Java developer that was hired, and the ninth employee overall, so I got a great deal of experience developing software.  Since there weren’t that many people in the organization, I also got a lot of field experience which meant that if I screwed up the code, I got yelled at (figuratively) by both my boss AND the customer.  Fun Times!  What made it better was that I got to help run pilot programs in Taiwan, Singapore, Malaysia and Malta.  Getting yelled at in Taiwan is slightly less annoying that getting yelled at in Dallas… I spent the next 5 years at Accenture doing systems integration in the ‘SOA’ group.  I joined as a Consultant and left as a Senior Manager.  I started out writing code in WebLogic Integration and left after I wrapped up project where I led a team of 25 to develop the next generation of a digital media platform to deliver HD content in a digital format.  At Accenture, I had the pleasure of working with some truly amazing people – mentoring some and learning from many others – and on some incredible real-world IT projects.  Given my background with the BEA stack of products I was often called in to troubleshoot and tune WebLogic, ALBPM and ALSB installations and have logged many hours digging through thread dumps, running performance tests with SoapUI and decompiling Java classes we didn’t have the source for so I could see what was going on in the code. I am now a Senior Principal Product Manager at Oracle in the Application Grid practice.  The term ‘Application Grid’ refers to a collection of software and hardware products within Oracle that enables customers to build horizontally scalable systems.  This collection of products includes WebLogic, GlassFish, Coherence, Tuxedo and the JRockit/HotSpot JVMs (HotSprocket, maybe?).  Now, with the introduction of Exalogic it has grown to include hardware as well. Wrapping it up… I love technology and have a diverse background ranging from software development to HW and network architecture & tuning.  I have held certifications for being an Oracle Certified DBA, MSCE and Cisco Certified Network Professional (CCNP), among others and I have put those to great use over my career.  I am excited about programming & technology and I enjoy helping people learn and be successful.  If you are having challenges with WebLogic, BPM or Service Bus feel free to reach out to me and I’ll be happy to help as I have time. Thanks for stopping by!   --Jeff

  Read the article

< Previous Page | 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331  | Next Page >