Search Results

Search found 4590 results on 184 pages for 'direction'.

Page 133/184 | < Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >

• GRUB reporting wrong partition type

  - by plok

  It all started when I had to replace one of the disks that the software RAID 1 on this machine currently uses. From that moment on I have not been able to boot to the Windows XP that is installed on the fourth hard drive, /dev/sdd. I am almost positive that the problem is related not to Windows but to GRUB, as if I unplug all the other hard drives so that the Windows XP disk is now /dev/sda it boots with no problem. The problem seems to be that GRUB detects a wrong partition type, which I understand suggest that something is really messed up. This is what I get when I try to follow the steps that until now had worked like a charm: grub> map (hd0) (hd3) grub> map (hd3) (hd0) grub> root (hd3,0) Filesystem type is ext2fs, partition type 0xfd 0xfd? That doesn't make sense. /dev/sdb and sdc are 0xfd (Linux raid), but not /dev/sdd: edel:~# fdisk -l [...] Disk /dev/sdd: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00048d89 Device Boot Start End Blocks Id System /dev/sdd1 * 1 30400 244187968+ 7 HPFS/NTFS edel:/boot/grub# cat device.map (hd0) /dev/sda (hd1) /dev/sdb (hd2) /dev/sdc (hd3) /dev/sdd I have been trying to work this out for hours, to no avail. Can anyone point me in the right direction?

  Read the article

• How do I disable tablet gestures in windows 8?

  - by ???

  I'm using a Wacom Intuos4 and I have recently upgraded to Windows 8. I don't have a problem when using Photoshop however I occasionally draw on flash based online boards. The problem is, when I drag the pen in a direction repetitively (which is basically all I do when drawing) it's detected as a gesture, sometimes causing Chrome to go to the previous page (left drag) and making me lose the entire thing. Is there a way to disable these "gestures"? I believe this is not something caused by Windows 8 (or Charms) because I run Windows in English although it's not the initial language that Windows was installed in. I changed to English long after the installation. When Windows takes a move as a gesture, a small text pops up next to the cursor informing me about what I have just done and those pop ups are not even in English. I'm sorry for failing to be any more specific here but these gestures could be a feature of either Windows (unlikely), the tablet, Chrome or the computer itself. It's an Acer Aspire and it has one of those little stickers on it that specifies some of the features and one of them reads "Multi-Gesture" (referring to the touchpad, I guess). Could it be that this Multi-Gesture feature somehow decided to expand and apply for my tablet as well? If so, how do I disable it?

  Read the article

• Server 2008 email on Event variables

  - by Jeff Miles

  One of the new features of Server 2008 is the ability to attach a task to a specific event in the event logs. One of the actions available is to send an email through a SMTP server. This is working great, however it would be ideal if in the message body, the Event contents could be placed. I have tried using $eventdescription and %eventdescription%, but those are just shots in the dark. Any amount of googling produces no results. Does anyone know if this is possible? Update: Sparks' suggestion below is a step in the right direction I believe, however that method doesn't seem to work for all values. For example, I can pull the RecordID, Severity and Channel as shown, but I can't use the same method to retreive the EventID, or most importantly the description. Here's the raw XML from one event: [Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"] [System] [Provider Name="DFSR" /] [EventID Qualifiers="16384"]4412[/EventID] [Level]4[/Level] [Task]0[/Task] [Keywords]0x80000000000000[/Keywords] [TimeCreated SystemTime="2009-05-14T18:18:09.000Z" /] [EventRecordID]45692[/EventRecordID] [Channel]DFS Replication[/Channel] [Computer]servername.domain.com[/Computer] [Security /] [/System] [EventData] [Data]9046C3F4-843E-4A53-B941-4B20764072E5[/Data] [Data]D:\departments\Geomatics\Plan Quality\Data Processing\CG3533017 2009-05-13 KT FIXED[/Data] [Data]D:\departments[/Data] [Data]{26D5F604-E603-4F87-8EC3-DE9A945DA8FD}-v927199[/Data] [Data]Departments[/Data] [Data]domain.ca\files\departments[/Data] [Data]B8242CE2-F5EB-47DA-BA5B-1DD2F7EE3AB9[/Data] [Data]DFAA7A54-66CB-4C31-81A0-0F861382C32C[/Data] [Data]CG3533017 2009-05-13-{26D5F604-E603-4F87-8EC3-DE9A945DA8FD}-v927199[/Data] [/EventData] [/Event] I have tried using a ValueQuery for EventData, but it returns no data.

  Read the article

• Basic connectivity issues between Win 7 and XP mixed wired/wireless network.

  - by Pulse

  Setup: Windows 7 x64 Ultimate desktop hard wired to Asus WL500gp router (WL500gpv2-1.9.2.7-d-r1445 firmware) Several Bridged VirtualBox VM's running XP, 7, ubuntu server 10.04, Mint 9 and SuSE 11.2 Win XP Pro SP3 notebook with D-Link Airplus wireless network card. No firewall or other security software currently running on either platform (at least for the duration of the test) Situation: Router is acting DHCP server Clients are receiving correct addresses and additional parameters Internet connectivity is available from all clients Windows 7 sharing is set to Network type = work (not home group) NetBT is disabled on all clients using smb over TCP What I can do: I can ping the router and internet addresses from the wireless XP notebook I can ping the Win 7 desktop and any VM from the XP wireless notebook I can ping all devices from the router All VM's and 7 can ping each other and the router as well as Internet addresses What I can't do: I cannot ping the XP wireless notebook from either The Win 7 desktop or the VM's it alwats returns a destination host unreachable. Tracert resolves the name or the XP notebook but also returns a destination host unreachable. From the above it would seem that something is blocking connectivity in a single direction (from the Win 7 box to the Win XP notebook) only but the router can ping the XP notebook. Some fresh input would be most welcome, as this is beginning to drive me batty. Thanks

  Read the article

• How can I automate or script daily downloads for any new anti- virus databases, and then have the program scan my drive?

  - by Macgrimm

  Howdy all Super Users" I humbly ask if any Super User can direct this long time, gray haired Apple Tech in the right direction on this issue. I believe there probably are many ways to skin this cat. But I am looking to find simply the best, most unattended way to get it done. Any help will be greatly appreciated. also (I know there are much better softwares out there for the Mac so please don't go there! The politics of this company dictate which Anti virus we have to use) anyway without any further wait: basically I am trying to automate 2 very important functions of Mc'Afee anti-virus for Mac. First I want to automate the process of retrieving new virus definition files, and second I want to automate the process of scanning for viruses. It turns out that Using Mc'Afee Anti-Virus for the Mac are both manual functions. And they left up to the user (per user account) to perform. Depending on all of about 150 MAc users to perform these 2 tasks themselves is around 65% compliance. My question then is: If I wanted to use the command line such as (open /Applications/McAfee\ Security.app) It will open up the Security Console. But how can I make command Mc'Afee go out and grab the definition files and scan the computer? I have to admit I am at a crossroad and Macaltimers has set in. I would really appreciate it if any of you "Super ~ Users" can help me out with this MacAltimers loss of how to what to do. Thanks to All up Front Macgrimm

  Read the article

• Terminal Server CPU usage at 100%

  - by Light1c3

  I'm running a terminal server with around 50-60 users,and every so often the server will go from 40% usage to 100%. I took a closer look an it seems every time this happens, a different user or two seem to be caught in a loop and end up using < 30% where the rest of the users only use a maximum of 5%. The company behind the software we use clame it's due to the servers inadequate hardware (It's a VM system running on a dual - quad core setup) which to me sounds like BS! I'm fairly new to this level of IT so if I misspoke I apologize. I have no way to prove it but I believe adding more raw hardware power wont do me any good as this to me seems like a bug in their software, and it will suck up as much ( or little) CPU as it's given. The VM in question has 4 vCPU cores and 12 GB RAM available, and is running Windows Server 2008, 64-bit Thanks in advance for your help! Note: I have the same question posted on SO, but was pointed in this direction so just in case, here is a link to the post http://stackoverflow.com/questions/17276602/termserver-cpu-at-100

  Read the article

• Server 2008 email on Event variables

  - by Jeff Miles

  One of the new features of Server 2008 is the ability to attach a task to a specific event in the event logs. One of the actions available is to send an email through a SMTP server. This is working great, however it would be ideal if in the message body, the Event contents could be placed. I have tried using $eventdescription and %eventdescription%, but those are just shots in the dark. Any amount of googling produces no results. Does anyone know if this is possible? Update: Sparks' suggestion below is a step in the right direction I believe, however that method doesn't seem to work for all values. For example, I can pull the RecordID, Severity and Channel as shown, but I can't use the same method to retreive the EventID, or most importantly the description. Here's the raw XML from one event: [Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"] [System] [Provider Name="DFSR" /] [EventID Qualifiers="16384"]4412[/EventID] [Level]4[/Level] [Task]0[/Task] [Keywords]0x80000000000000[/Keywords] [TimeCreated SystemTime="2009-05-14T18:18:09.000Z" /] [EventRecordID]45692[/EventRecordID] [Channel]DFS Replication[/Channel] [Computer]servername.domain.com[/Computer] [Security /] [/System] [EventData] [Data]9046C3F4-843E-4A53-B941-4B20764072E5[/Data] [Data]D:\departments\Geomatics\Plan Quality\Data Processing\CG3533017 2009-05-13 KT FIXED[/Data] [Data]D:\departments[/Data] [Data]{26D5F604-E603-4F87-8EC3-DE9A945DA8FD}-v927199[/Data] [Data]Departments[/Data] [Data]swg.ca\files\departments[/Data] [Data]B8242CE2-F5EB-47DA-BA5B-1DD2F7EE3AB9[/Data] [Data]DFAA7A54-66CB-4C31-81A0-0F861382C32C[/Data] [Data]CG3533017 2009-05-13-{26D5F604-E603-4F87-8EC3-DE9A945DA8FD}-v927199[/Data] [/EventData] [/Event] I have tried using a ValueQuery for EventData, but it returns no data.

  Read the article

• What cause high CPU usage on the server during file upload

  - by bosiang

  When I try to upload a huge file size (approx 2GB), the server cpu usage goes really high. What should I do to fix this? I just use standard html form and php, for file upload. I'm sorry if I post on the wrong forum. Please point me to the right direction here is the result of "top" command during uploading 4 files (18mb, 38mb, 60mb, 33mb) 1904 apache 20 0 33504 5740 1952 R 28.3 0.2 0:02.19 httpd 1905 apache 20 0 33504 5740 1952 R 28.3 0.2 0:01.99 httpd 1903 apache 20 0 33232 6968 3060 R 28.0 0.2 0:01.98 httpd 1910 apache 20 0 33240 6020 2248 S 11.5 0.2 0:02.85 httpd 2133 root 20 0 2656 1124 896 R 1.6 0.0 0:00.71 top 1 root 20 0 2864 1404 1188 S 0.0 0.0 0:03.99 init the code for chunking, although eventhough I don't use this code (just simple file upload), it still cause that high cpu usage function sendRequest() { //clean the screen //bars.innerHTML = ''; var file = document.getElementById('fileToUpload'); for(var i = 0; i < file.files.length; i++) { var blob = file.files[i]; var originalFileName = blob.name; var filePart = 0 const BYTES_PER_CHUNK = 100 * 1024 * 1024; // 10MB chunk sizes. var realFileSize = blob.size; var start = 0; var end = BYTES_PER_CHUNK; totalChunks = Math.ceil(realFileSize / BYTES_PER_CHUNK); alert(realFileSize); while( start < realFileSize ) { if (blob.webkitSlice) { //for Google Chrome var chunk = blob.webkitSlice(start, end); } else if (blob.mozSlice) { //for Mozilla Firefox var chunk = blob.mozSlice(start, end); } uploadFile(chunk, originalFileName, filePart, totalChunks, i); filePart++; start = end; end = start + BYTES_PER_CHUNK; } } }

  Read the article

• NGINX returning 404 error on a valid url

  - by Harrison

  We have a site that runs PHP-FPM and NGINX. The application sends invitations to site members that are keyed with 40 character random strings (alphanumerics only -- example below). Today for the first time we ran into an issue with this approach. The following url: http://oursite.com/notices/response/approve/1960/OzH0pedV3rJhefFlMezDuoOQSomlUVdhJUliAhjS is returning a 404 error. This url format has been working for 6 months now without an issue, and other urls following this exact format continue to resolve properly. We have a very basic config with a simple redirect to a front controller, and everything else has been running fine for a while now. Also, if we change the last character from an "S" to anything other than a lower-case "s", no 404 error and the site handles the request properly, so I'm wondering if there's some security module that might see something wrong with this specific string... Not sure if that makes any sense. We are not sure where to look to find out what specifically is causing the issue, so any direction would be greatly appreciated. Thanks! Update: Adding a slash to the end of the url allowed it to be handled properly... Would still like to get to the bottom of the issue though. Solved: The problem was caused by part of my configuration... Realized I should have posted, but was headed out of town and didn't have a chance. Any url that ended in say "css" or "js" and not necessarily preceded by a dot (so, for example, http://site.com/response/somerandomestringcss ) was interpreted as a request for a file and the request was not routed through the front controller. The problem was my regex for disabling logging and setting expiration headers on jpgs, gifs, icos, etc. I replaced this: location ~* ^.+(jpg|jpeg|gif|css|png|js|ico)$ { with this: location ~* \.(jpg|jpeg|gif|css|png|js|ico)$ { And now urls ending in css, js, png, etc, are properly routed through the front controller. Hopefully that helps someone else out.

  Read the article

• What switch should we use for PCoIP?

  - by Jay R.

  We have a small lab space that seats 10 people and has 20 machines. Each machine is set to 1920x1200 resolution because the user apps are best used at that resolution. Currently the machines are all located close enough to montors that a DisplayPort cable will reach, but the pending lab remodel positions them around 80 feet or more away in racks. Our proposed solution is to use PCoIP. We purchased 10 PCoIP portals and 20 PCoIP host cards. We plan to set up a dedicated network to handle just the PCoIP traffic. After testing just one portal and one host card with a cheap 1G switch from a local office supply store, we were left with less than good impressions about the usefulness in our lab. The framerates were not spectacular and the mouse seemed jerky. Our concern is that we can't get away with the cheap 1G stuff from the store because adding more machines to the switch will just make the user experience worse. What switch would be recommended to best support our PCoIP situation? We will need to plug in at least 30 cables based on just those machines. Is there a particular feature to search for that makes a difference? Is there a switch that works best with PCoIP? Added Info: The reporting webapp for the host card shows maximum bandwidth usage to be 220000 kbps. The average appears to be around 180000 kbps. The reverse direction is much lower, like 15000 kbps.

  Read the article

• New to server admin, Diagnosing Memory and CPU issues on DV

  - by G Thompson

  Sorry for my ignorance and lack of knowledge. I'm a PHP/Front-end developer just now venturing into very minor server management/diagnostics. I have a Media Temple DV account. I have 2 sites that run a PHP script through a subscription service to an API. Basically API hits site with said script. Script runs, gathers data from api, saves data to SQL database. I noticed that these sites seemed to causing memory overages on my server (not sure why). So I temporarily disabled them. The memory overage alerts stopped but my CPU still sits really high, like at 115% and above. I'm trying to diagnos this with tutorials and resources but just can't seem to find a solution. I'll attach screenshots(screenshots are without the PHP scripts I assume are responsible for the memory issues) I'm assuming are important to the diagnosis, but if anyone can point me in the right direction to start A. figuring out if and why the PHP script may be causing memory overages and B. Why my CPU is always over 100%. Thanks guys! Links to screen shots... can't post with low points. http://i.stack.imgur.com/A64k4.png http://i.stack.imgur.com/qm1rV.png

  Read the article

• Configure X connections over TCP without using an X connection

  - by Darren Cook

  I want to run a GUI application on a remote machine I only have ssh access to. I don't need to, or want to, see the GUI window. (I know I could use something like ssh -C -X remote_server if I wanted the GUI to be on my client.) I know X is running on the remote machine, as ps shows this: root ... /usr/bin/Xorg :0 -br -audit 0 -auth /var/gdm/:0.Xauth -nolisten tcp vt7 I set DISPLAY=:0.0 but I then get "Xlib: connection to ":0.0" refused by server" when I try to use it. At Get remote x display working in linux without ssh tunneling and Xserver doesn't work unless DISPLAY=0.0 I see the advice to use gdmsetup to allow X to listen on TCP. But, gdmsetup is a GUI application! And trying to run it over ssh -X did not work ("X11 connection rejected because of wrong authentication"). So, is there a text file I can edit to remove -nolisten? And, after editing it, how do I safely restart X, remotely? (There is other stuff running on this machine, so requesting a reboot is possible, but undesirable.) If not, should gdmsetup be able to run over ssh and I should persevere in that direction? UPDATE: I had to do the ssh -X session as root (ssh as a normal user, then sudo or su, does not work.) So, I did the edit with gdmsetup. I then restarted X with gdm-restart. I've also done xhost + from that ssh -X session. The ps line no longer shows the -nolisten tcp part. But still no luck connecting to it, with either DISPLAY=:0 or DISPLAY=localhost:0

  Read the article

• Issues with returned mail sent to web-based email domains

  - by Beeder

  My company is having issues with returned mail that we send out to external domains. A few weeks ago we replaced a firewall and changed ISP providers and began subsequently having issues RECEIVING emails from external sources because we hadn't updated our new IPs in the DNS records. After making the necessary configuration changes and setting up SMTP forwarding over port 25 to our mail server, everything was working fine up until a few days ago when we started having mail sent out returned to us. We aren't having any trouble communicating internally (to recipients on our domain) but it seems we're having trouble with outbound messages to web-based email recipients. (@hotmail, @live, @yahoo, @gmail...etc) Currently we are running Server 2003 SP2 and exchange 2003. I'm very unfamiliar with configuring Exchange and could really use some help in narrowing down the possibilities. I did some research and am becoming suspicious of Sender ID being the culprit due to our recent IP address change and the likelihood that Sender ID is identifying us as a fake domain. Am I going in entirely the wrong direction? Any input or guidance would be infinitely appreciated. This is the message that is returned when an outbound message fails...this particular one was sent to my @live.com account for testing purposes... Your message did not reach some or all of the intended recipients. The following recipient(s) could not be reached: [email protected] on 5/17/2012 3:02 PM There was a SMTP communication problem with the recipient's email server. Please contact your system administrator. Unfortunately, messages from xx.x.xx.x weren't sent. Please contact your Internet service provider since part of their network is on our block list. I tried a reverse DNS lookup and found that we are set up as a Forward-confirmed reverse DNS. So do I just need to contact my ISP and have them correct their DNS records or is this something I can solve on our end??

  Read the article

• Vim: auto-comment in new line

  - by padde

  Vim automatically inserts a comment when I start a new line from a commented out line, because I have set formatoptions=tcroql. For example (cursor is *): // this is a comment* and after hitting <Enter> (insert mode) or o (normal mode) i am left with: // this is a comment // * This feature is very handy when writing long multi-line comments, but often I just want a single line comment. Now if I want to end the comment series I have several options: hit <Esc>S hit <BS> three times Both of these afford three keystrokes, taken together with the <Enter> this means four keystrokes for a new line, which I think is too much. Ideally, I would like to just hit <Enter> a second time to be left with: // this is a comment * It is important that the solution will also work with different indentation levels, i.e. int main(void) { // this is a comment* } hit <Enter> int main(void) { // this is a comment // * } hit <Enter> int main(void) { // this is a comment * } I think I have seen this feature in some text editor a few years ago but I do not recall which one it was. Is anyone aware of a solution that will do this for me in Vim? Pointers in the right direction on how to roll my own solution are also very welcome.

  Read the article

• Ubuntu + LigHTTPd: Server requests taking ages

  - by ctrl_freak

  I've had an issue since upgrading my distro a couple of weeks ago from hardy; receiving data after making a request has increasing intervals of nothing, as you can see from the picture below. http://i49.tinypic.com/2w5lvr9.png I have since reinstalled fresh from an Ubuntu 10.04 Server (i386) disk, but am still having the same issues. I'm running on a LigHTTPd, MySQL, PHP5 stack. The surprising thing is, that local browsing using lynx is super fast, as expected. Initially, after reinstalling, I copied over the old configuration files from the previous installation, but have since reinstalled LigHTTPd and rebuilt the config file from scratch. The only correlation I could find, was that I attempted installation of ionCube and Zend Optimizer for a script I was testing, however I would think that it could no longer impact seeing I had reinstalled the OS. I have also removed Suhosin just in case, however it had no impact. I'm thinking it possibly has something to do with networking, but I wouldn't know where to start. The server is manually assigned an IP by it's MAC address on the router. The fact that the time seems to be exponential (to a point) worries me. I've tried strace'ing the LigHTTPd and MySQL processes, however I couldn't see anything obvious, not that I'd really know what I'm looking for. RAM and CPU usage don't seem to be out of the ordinary, but I can't say its perfect.. I'm hoping someone has experienced the same, or can point me in a direction, as searching has proved fruitless as I don't know anything specific. Config files can be posted, if requested.

  Read the article

• Executing a git command using remote powershell results in a NativeCommmandError

  - by user204777

  I am getting an error while executing a remote PowerShell script. From my local machine I am running a PowerShell script that uses Invoke-Command to cd into a directory on a remote Amazon Windows Server instance, and a subsequent Invoke-Command to execute script that lives on that server instance. The script on the server is trying to git clone a repository from GitHub. I can successfully do things in the server script like "ls" or even "git --version". However git clone, git pull, etc. result in the following error: Cloning into 'MyRepo'... + CategoryInfo : NotSpecified: (Cloning into 'MyRepo'...:String) [], RemoteException + FullyQualifiedErrorId : NativeCommandError This is my first time using PowerShell or a Windows Server. Can anyone provide some direction on this problem. The client script: $s = new-pssession -computername $server -credential $user invoke-command -session $s -scriptblock { cd C:\Repos; ls } invoke-command -session $s -scriptblock { param ($repo, $branch) & '.\clone.ps1' -repository $repo -branch $branch} -ArgumentList $repository, $branch exit-pssession The server script: param([string]$repository = "repository", [string]$branch = "branch") git --version start-process -FilePath git -ArgumentList ("clone", "-b $branch https://github.com/MyGithub/$repository.git") -Wait I've changed the server script to use start process and it is no longer throwing the exception. It creates the new repository directory and the .git directory but doesn't write any of the files from the github repository. This smells like a permissions issue. Once again invoking the script manually (remote desktop into the amazon box and execute it from powershell) works like a charm.

  Read the article

• Long running php script hangs/terminates on IIS 7.5

  - by Rich

  I'm a bit of nube when it comes to configuring IIS 7.5 and Php so apologies if this is a silly question but I've been wrestling with this for over half the day and need some fresh input. I have a php application running on IIS 7.5 , php 5.4 running as fastcgi. The application works absolutley fine with the exception that long running php scripts seem to hang; no 500 error they simply seem never complete and return the results to the browser. I've written a simple test script below to eliminate the possibility of programming error in the main app : <?php /* test timeout */ /*set_time_limit(110);*/ echo "Testing time out in seconds\n"; for ($i = 0; $i < 175; $i++) { echo $i." -- "; if(sleep(1)!=0) { echo "sleep failed script terminating"; break; } } ?> If I run the script beyond 175 seconds it hangs. Below that it will return the results to the browser. Here are the time out parameters that I've set for php and fastcgi. I've also played around setting these really low in order to get various time out errors and have succeeded which brings me to the conclusion that there's another setting that I'm missing .. perhaps. fastcgi activity timeout=800 Idle Timeout = 900 request Timeout 800 Php max_execution_time=700 Any solutions or pointers in the right direction would be very ... very welcome. Thanks

  Read the article

• Microphone array support in Windows. Info on performance and compatible hardware?

  - by exinocactus

  It is officially claimed by Microsoft (Audio Device Technologies for Windows), that Windows Vista has an integrated system-level support of microphone arrays for improved sound capturing by isolating a sound source in target direction and rejecting ambient noise and reverberation. In more technical terms, an implementation of an adaptive beamformer. Theoretically, microphone arrays with 2-4 mics can substantially improve SNR under some conditions like speaker in front of the laptop in noisy environment (airport, cafe). Surprisingly, though, I find very little information about commercially-available products supporting these new features. I mean products like portable usb micropone arrays or laptops or flat screens with integrated mic arrays. I could only find info about two laptop models having "noise cancelling digital array microphone". These are Dell Latitude and Eee PC 1008P-KR. Now my questions: Do you have any experience with the Windows beamformer implementation? For instance, in the above mentioned laptops. How well does it work? Are there any tests results available in the net or in print (papers?)? Do you know about other microphone array hardware? What could be the reason why mic array technology didn't get sucess Is there mic arrays support in 'Windows 7'?

  Read the article

• Setting up DNS using BIND

  - by dupdupdup

  i have troubles setting up my db files. Please kindly point me in the right direction! i need to define a nameserver that manage a domain example.org.au then i need it to have two records. one called server which is the ip address of current machine the other called www where www.example.org.au will be pointed to another ip address. i cant seem to get my system to work. This is my db.example.org.au file example.org.au. IN SOA server.example.org.au. ( 1; 3; 1h; 1w; 1h ) ; ; ;Host addresses localhost.example.org.au IN A 127.0.0.1 www.example.org.au. IN A 192.168.1.200 ; another virtual machine server.example.org.au IN A 192.168.1.199 ; current virtual machine If possible Please correct my errors! thanks! Any good guides out there? Thanks in advance ! :)

  Read the article

• How many bootable partitions are possible to have on one hard drive?

  - by draiden

  This may not be the correct place to post this; if that's the case, just let me know and point me in the right direction please! I'm thinking of building a box that needs to be lightweight and portable, and would need to be able to boot multiple installations of windows. I am needing to have multiple installations so that I can, for example, plug the box in to the network at one location, boot in to that location's partition, and have full access to everything I would normally need to do on a computer that has already been set up on that network. Then, when I go to the next client, I would be able to do the same thing, with the new location's partition, and have all of those network settings, drive mappings, etc., available there. Obviously I'd need to go through and set them all up on the different locations/networks, I'm not expecting it to magically know where I am and what I'm doing. It would be like I'm carrying around a computer that is configured for each place I need to go in one little box, instead of having to have multiple computers or having to reconfigure all the settings and such every time I go to another client. Or is there an easier way to do this that I haven't learned of?

  Read the article

• Basic connectivity issues between Win 7 and XP mixed wired/wireless network. [Solved]

  - by Pulse

  Setup: Windows 7 x64 Ultimate desktop hard wired to Asus WL500gp router (WL500gpv2-1.9.2.7-d-r1445 firmware) Several Bridged VirtualBox VM's running XP, 7, ubuntu server 10.04, Mint 9 and SuSE 11.2 Win XP Pro SP3 notebook with D-Link Airplus wireless network card. No firewall or other security software currently running on either platform (at least for the duration of the test) Situation: Router is acting DHCP server Clients are receiving correct addresses and additional parameters Internet connectivity is available from all clients Windows 7 sharing is set to Network type = work (not home group) NetBT is disabled on all clients using smb over TCP What I can do: I can ping the router and internet addresses from the wireless XP notebook I can ping the Win 7 desktop and any VM from the XP wireless notebook I can ping all devices from the router All VM's and 7 can ping each other and the router as well as Internet addresses What I can't do: I cannot ping the XP wireless notebook from either the Win 7 desktop or the VM's; it always returns a destination host unreachable error. Tracert resolves the name or the XP notebook but also returns a destination host unreachable. From the above it would seem that something is blocking connectivity in a single direction (from the Win 7 box to the Win XP notebook) only but the router can ping the XP notebook. Some fresh input would be most welcome, as this is beginning to drive me batty. Thanks

  Read the article

• Problem with connecting two different networks

  - by tanascius

  I have two networks: 192.168.13.0/24 (blue) and 192.168.15.0/24 (green). Computer A is connected to the 13-net, only. Computer B has two interfaces, one in each network. There is third computer that acts like a router and connects the 13-net to the 15-net (only in this direction). Now, I'd like to ping 192.168.15.100 from computer A to B. Unfortunately there is never a reply. But when I use a hub instead of a switch it works. In my opinion the ping packet travels through the switch to the router (which is the default route/gateway for A). The router sends the packet back to the switch to B. Probably B receives it on its 15-net interface but answers with it's 15th interface? Is this possible? The problem is, that B may have only a gateway 192.168.13.50 - but I am not really sure of it (B is a embedded system with limited configuration possibilities). Can anyone explain what happens here? Thank you!

  Read the article

• SMTP Server setting on Windows 2008 R2

  - by user223298

  I am very very new to this and just trying to configure SMTP virtual server. I have followed a few threads to get it all running, but the mails are not being delivered. What I have done so far - 1) Install SMTP server. 2) SMTP server Properties General Tab - IP address is set to 'All Unassigned'. Access Tab - Authentication is anonymous access. Everything else is left to Default settings. Delivery Tab - Outbound security is anonymous access. In Advance section, entered the domain name in the FQDN field, and localhost in Smart host field. 3) Created an Inbound Rule for SMTP service to allow connections to Port 25. When I try to telnet, everything works up until the point the mail has to be send. Now, the sender's domain is different to the receiver's domain. Not sure if settings have to be changed to allow that? I had set the Relay restrictions on SMTP server, but because I couldn't send the mails, I thought I might as well make it work without the relay first. The error I see while sending the mail is 451 Timeout waiting for client input. I used to get some other error before when I had Relay restrictions on. Can anyone please point me in the right direction? Please let me know if you need more information. Thanks.

  Read the article

• Wifi antenna extension with F-connector/RG-6(RG-59) cable?

  - by rjz2000

  In an older house, the wire mesh in walls surrounding the furnace behave like a Faraday cage and block wifi signals. It is also difficult to lay new cable, however there is television cable to multiple locations due to there once having been a roof-installed, television antenna. It would be relatively trivial to install the wifi router at the center distribution point, then have the antenna broadcasting/receiving the signal plugged in at each of the old television outlets. I assume that it would not be too difficult to find an adapter for SMA <- F-type connectors. The cable is actually RG-59 rather than RG-6, but I assume that it still has relatively good RF isolation along its length, which is no more than a couple hundred feet in any direction. Does anyone know a problem with the idea? Will a router get confused if there is /too little/ interference between the two antenna? Is that length of cable (~100ft) too long for the signal a router broadcasts? I have seen that it is also possible to use old ~$30/each FiOS cable modems available on eBay to extend a network over television cable. However, that seems like a less elegant solution, and might interfere with upnp and dlna services I'd like to have work on a single network. Thanks if anyone has answers or suggestions before I try this project!

  Read the article

• Can I use Upstart to start a script which requires the user's X session?

  - by ledneb

  I wrote a script which greps through the output of synclient to determine whether a laptop's touchpad has miraculously turned itself off (Ubuntu seems to /love/ doing this recently) and, if so, turns it back on. The script is something like this: #!/bin/bash while true ; do if [ `synclient | grep -e"TouchpadOff[\s]*1" | wc -l` -ge 1 ] ; then synclient TouchpadOff=0 fi sleep(3) done (I don't have the laptop to hand right now but you get the point! I will update later when I'm at my laptop if that's incorrect) So I tried running this as an upstart script so my touchpad can heal itself without any interaction. But it seems synclient doesn't find the current user's X session when my script is upstart'ed. I tried running it by using something like su -c myscript.sh ledneb in my script stanza, but to no avail. Should I be looking in the direction of /etc/X11/xinit/xinitrc rather than upstart? Is there a proper way to have this script run in the context of the current (or even a hard-coded) user's x session?

  Read the article

< Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >