Search Results

Search found 22380 results on 896 pages for 'hard drive failure'.

Page 133/896 | < Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >

• "Reboot and select proper boot device"?

  - by overtherainbow

  Hello I didn't find the answer in Clonezilla's site/mailing list archives. Maybe someone has already seen this issue and knows how to recover from it: On a test host, using www.partedmagic.com, I created two partitions: One to hold an OS I wish to use for testing (/sda1), and a second partition to hold images (/sda2) After trying out Windows7, I used CloneZilla to restore an XPSP3 image, but I get the following error message when rebooting: "Reboot and select proper boot device" Could it be that Clonezilla didn't save/restore the MBR? Gparted didn't let me set a partition as "active", so it could also be this, but I have no idea. Thank you for any help.

  Read the article

• Directly reading a LTO tape drive

  - by John

  On our server (M$ 2003) is it possible to directly read our LTO 4 tape drive and copy the entire ntbackup created bkf file on it to an external hard disk? (Is the tape backup even stored on a tape as a bkf file, I’m going off when we only used external usb HD’s.)

  Read the article

• Cleaning up temp files in OSX

  - by deddebme

  I was a Windows person for more than 10 years. Around 4 months ago, I switched to Mac, and I have never looked back. But there is one thing that bothers me, which is my Mac partition volume is losing space slowly and gradually. I am pretty sure there are a lot of orphaned temporary files laying around in the volume. I know where to find the obsoleted temp files in my Windows partition, how about in Mac OSX?

  Read the article

• My Western Digital 500GB Passport disk says "not formatted" when I plug it in Windows

  - by learnerforever

  Hi, When I plug my Western Digital 500 GB Passport disk in my Windows machine, it says "not formatted, do you want to format it" something. I started having this problem after I put it in an old desktop at home. I don't exactly know what went wrong. May be partition table is corrupted etc. Questions: Some quick search on internet tells me there are partition fixing utilities, which can fix corrupted partition table. testdisk being one of such utiities. I can understand how to use this to copy files from the disk to some other location, but I would like to fix the partition table in-place so that I don't have to temporary move around my data of approx size 300GB, then format passport disk and then again bring back the data. Is there any way I can fix the partition table in-place? Also, how to know which file system was there originally in the disk? Can I only keep the same file system? My current laptop is running Windows 7. Earlier I used to use Windows Vista. My other laptop has Windows XP. So I have access to Windows 7 and Windows XP. Please help! Thanks,

  Read the article

• Can't restore HDD using multiple programs

  - by jonney

  Please refer to my original question about this issue. I tried GetDataBack and it doesn't seem to scan or do anything. I chose the default settings from the first screen and then on step 1 I chose my HDD that's damaged. In step 2, nothing happens. It doesn't scan or do anythong, and on step 3 it doesn't display any of my files. I have also tried TestDisk and what happens in TestDisk is that when I try to fix and rebuild the MFT, it says this: MFT and MFT mirror are bad. Failed to repair them. Here is the status of that HDD under Testdrive: I also tried this app and got no results when I tried to recover the files. I keep getting this error: Last but not least, I tried Recuva and that simply says it's unable to read the MFT. Any suggestions? I have tried various apps already and none of them seems to work.

  Read the article

• Is it possible to mount a disk image, created with dd, to a directory on a mounted external usb hdd?

  - by Keeper Hood

  I have an image of my home (/dev/sda3) partition, which I've created using the "dd" command. dd if=/dev/sda3 of=/path/to/disk.img I've deleted the home partition via gparted in order to enlarge my /dev/root partition. Then I've recreated the /dev/sda3 partition which is smaller in size then the one I've backed up to the image. I was wondering since I have a 2TB external HDD, could it be possible to mount my backed up image on the external HDD and then copy the files into the /home directory. Since the external HDD would be already in a "mounted state", I'm unsure whether this is a good idea, mounting on a mounted device. I'm running Slackware 13.37 (64bit). used ext4 on all the partitions. resized the root partition with gparted live cd. I've tried mount -t ext4 /path/to/disk.img /mng/image -o loop It gave me an fs error (wrong fs type, bad option, bad superblock on dev/loop/0) Then i did dmesg | tail which outputs: EXT4-fs (loop0) : bad geometry: block count 29009610 exceeds size of defice (1679229 blocks) I have no idea what to do, I want to restore my /home data from the image I've backed up.

  Read the article

• Problem adding second domain controller to SBS 2008

  - by Quango

  Have an SBS 2008 server in one location, and want to add a backup domain controller at a different site. The two sites are linked by a VPN. New server is running Server 2008 R2, fully patched. At present it is a member server and the DNS is pointing at the SBS DNS. When I try running DCPROMO to connect the server, the wizard runs fine up to the point where the wizard is 'configuring Active Directory Domain Services' and 'examining forest': "The operation failed because: The wizard could not read operational attributes from the remote Active Directory Domain Controller SERVER.DOMAIN.LOCAL using LDAP. "The specified server cannot perform the requested operation." This error can occur if you have not been granted necessary permissions to read data in the directory. For more information, please see article 936241 in the Microsoft Knowledge Base (http://go.microsoft.com/fwlink/?LinkId=88420)." I was logged on as domain administrator. Interestingly the link is invalid and the KB article does not exist..! Settings: Configure this server as an additional Active Directory domain controller for the domain "[domain]". Site: [site] Additional Options: Read-only domain controller: "No" Global catalog: Yes DNS Server: Yes Update DNS Delegation: No Source domain controller: any writable domain controller Database folder: C:\Windows\NTDS Log file folder: C:\Windows\NTDS SYSVOL folder: C:\Windows\SYSVOL The DNS Server service will be configured on this computer. This computer will be configured to use this DNS server as its preferred DNS server.

  Read the article

• Hardware issue: UI freezes and hard drive light goes solid several times per hour

  - by alchemical

  I have a workstation that has been acting up for the last few weeks. It currently has Windows Server 2008 R2 installed on it, and 2 HDD mirrored. A few times per hour the screen will freeze up, applications will say "not responding", sometimes the screen will turn a lighter shaded color--at the same time the HDD light is on solid. This lasts anywhere from 10 to about 50 seconds. Could this be something with one of the drives or the mechanism keeping the mirror in place? Any other ideas?

  Read the article

• Chipset fan on the frtiz - compressed air hasn't fixed anything - is there anything I can do?

  - by Anthony

  Yesterday, my computer started to make an annoying whining noise. Knowing that this is likely a fan issue, I opened the case and proceeded to determine which fan was causing the issue. I got some compressed air and tried cleaning out the dust around it (and the rest of the computer while I was at it). This hasn't seemed to fix the issue. Now, if it were just any fan, I would probably just replace the fan - they're relatively cheap after all. However, this is a special fan. Aside: For what its worth, I feel bad that the graphics card blocks part of the fan, but it is the only slot the graphics card fits, so I had no choice. After pulling out my motherboard user guide, it looks like this is a fan placed directly on top of the chipset. To be perfectly honest, I have no clue what the purpose of the chipset is - but it sounds important. After some quick research, I see that it is responsible for providing the bridge between my CPU, RAM and graphics, among other things. Just a quick search at Newegg tells me that chipset fans can be purchased at pretty reasonable prices (< 20 dollars). Is it practical to replace this fan? It is an old computer as computers go and I wouldn't be terribly upset to upgrade the motherboard and processor, so perhaps this is a sign. Hardware Specs: Motherboard: Asus A8N-E Chipset: NVIDIA nForce4 Ultra

  Read the article

• Why does storage's performance change at various queue depths?

  - by Mxx

  I'm in the market for a storage upgrade for our servers. I'm looking at benchmarks of various PCIe SSD devices and in comparisons I see that IOPS change at various queue depths. How can that be and why is that happening? The way I understand things is: I have a device with maximum (theoretical) of 100k IOPS. If my workload consistently produces 100,001 IOPS, I'll have a queue depth of 1, am I correct? However, from what I see in benchmarks some devices run slower at lower queue depths, then speedup at depth of 4-64 and then slow down again at even larger depths. Isn't queue depths a property of OS(or perhaps storage controller), so why would that affect IOPS?

  Read the article

• How can I repair my USB drive?

  - by yurko

  USB drive is in read only state and I can't repair it. First of all I tried erase it using dd: root@yurko-laptop:/home/yurko-laptop# ls -l /dev/disk/by-id | grep usb lrwxrwxrwx 1 root root 9 ??? 18 23:45 usb-Generic_Flash_Disk_C173828A-0:0 -> ../../sdb lrwxrwxrwx 1 root root 10 ??? 18 23:45 usb-Generic_Flash_Disk_C173828A-0:0-part1 -> ../../sdb1 root@yurko-laptop:/home/yurko-laptop# dd if=/dev/zero of=/dev/sdb dd: ?????? ? «/dev/sdb»: ?? ?????????? ????????? ????? 8257537+0 ??????? ??????? 8257536+0 ??????? ???????? ??????????? 4227858432 ????? (4,2 GB), 942,633 c, 4,5 MB/c After that I wanted to create new filesystem using fdisk: root@yurko-laptop:/home/yurko-laptop# fdisk /dev/sdb You will not be able to write the partition table. WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): p Disk /dev/sdb: 4227 MB, 4227858432 bytes 4 heads, 63 sectors/track, 32768 cylinders Units = cylinders of 252 * 512 = 129024 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 18 32768 4126596 b W95 FAT32 Command (m for help): fdisk showed that the partition still exists and I can't write the partition table. I tried to delete the existing partition: Command (m for help): d Selected partition 1 Command (m for help): w Unable to write /dev/sdb root@yurko-laptop:/home/yurko-laptop# Why am I not be able to write the partition table? Does it mean that some hardware failure occurred? And is it possible to repair the current USB drive? I've tried to use hdparm and it showed that the readonly flag is on: root@yurko-laptop:/home/yurko-laptop# hdparm /dev/sdb /dev/sdb: SG_IO: bad/missing sense data, sb[]: f0 00 05 00 00 00 00 0a 00 00 00 00 26 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 multcount = 0 (off) readonly = 1 (on) readahead = 256 (on) geometry = 1016/131/62, sectors = 8257536, start = 0

  Read the article

• Computer has video artifacts after been exposed to rain

  - by Sadie

  My desktop now displays video artifacts after been exposed to rain. Only a very small amount of moisture went inside the case. The only place I noticed any water was on the CPU socket. I used a hair dryer and paper towels to wick any remaining moisture. When I boot the PC it loads it the OS, but there are large numbers of video artifacts. The artifacts appear symmetric if that helps. I am wondering what components I need to replace. I'd like to salvage what I can. My setup: AMD Athlon x3, Asus main board (AM2 socket), nVidia GT 430 PCIe, 8gb (4gb x2) DDR3

  Read the article

• XFS and loss of data when power goes down

  - by culebrón

  Each time electricity goes down, my desktop (without UPS) loses some temporary information. Opera can lose settings, history, cache, or mail accounts (Thanks heavens I was wise to use IMAP). Partially or all together. a whole file (complete and save) in Geany appeared empty (and I didn't commit it to Git) rhythmbox lost all podcasts subscription data I'm afraid there are other losses I just didn't see. What's the reason? A memory files cache, a mem-disk? Or non-atomic file writes in xfs? I have Ubuntu 9.10 and XFS on both / and /home partitions. Is ext4 safer in such circumstances? I've seen ext3 is faster. Is it as safe as *4? Given that the apartment I rent is connected to a common bus and 1 safety switch for several apartments, and the neighbors - alone or together - overload it at least once every week, the lights go down often enough for this to be an issue.

  Read the article

• How to transfer Windows Vista disk image to new machine

  - by Mike Hobbs

  I'm trying to upgrade a user's machine to some better hardware. I know of Easy Transfer, but I'd rather not have to reinstall all the programs that are already present. (Some of which are no longer available, anyway). Instead, I'm trying to transfer the entire disk image from one machine to the other, but I ran into issues. If I copy the partition image over to the new machine using Clonezilla, I get errors on boot saying that I need to insert the Vista install disk and run repair. I do that, but it then says that it is unable to repair whatever it is that's broken. Next, I tried to sysprep the old machine before creating the image, but sysprep fails saying that it encountered some sort of system error. Should it be possible to sysprep any arbitrary machine, or does it only work on a relatively clean install? Could it be a missing driver that is tripping me up? The new machine is a fairly stock desktop that shouldn't need any special drivers beyond what's already present in standard Vista. Are there any foolproof methods for doing this sort of thing?

  Read the article

• Booting from a USB

  - by Nish

  Will booting linux (slitaz) from my USB drive damage my original OS (windows vista)?

  Read the article

• Windows 7 System process reading/writing like crazy

  - by Mats Ekberg

  I have a problem that my windows 7 computer sometimes starts accessing the disk like crazy for maybe 10 minutes at a time. The process in question is the "system" process. I have disabled superfetch and hibernation on my computer, if that makes any difference. I disabled those to see if they were the cause of the problems, but no change. I have 6 GB of RAM and only the web browser was started when I took the screenshot, so I don't think it was thrashing due to page faults. Any ideas on how to find the cause of this?

  Read the article

• What is the S.M.A.R.T. page?

  - by Mads Skjern

  I've just listened to Steve Gibson talk about his SpinRite software, on the Security Now podcast episode 336 (transscript). At 33:20 he says: I can show and do show on the SMART page that sectors are being relocated and that errors are being corrected. That SMART analysis page sometimes scares people because it shows, wait a minute, this thing says we're correcting so many errors per megabyte. What is this SMART page? 1) Some information saved on the HD by SMART, that I can access with a SMART tool like smartmontools? 2) A page (tab) in his SpinRite software? In any case, can I see, in any way, what sectors are marked as bad, without using SpinRite? Preferably using smartmontools!

  Read the article

• File Saving Sometimes Fails

  - by YellPika

  When I attempt to save files, it sometimes (randomly) fails. In Blender, I sometimes get "Version Backup Failed: File Saved With @". In Visual Studio, building sometimes fails with an error message indicating that the target file/exe cannot be overwritten. If I wait a bit, I can save fine. It's almost as if programs are taking an abnormal amount of time to 'let go' of the files. What could be causing this behaviour? This seems to be caused by Windows Live Mesh monitoring my files, and locking them whenever it uploads the new versions (BAD considering the amount of times I save my files, even redundantly). Any suggestions to work around this behaviour? Should I switch to a better service to sync my files?

  Read the article

• Lost HDD partition to clean command, testdisk unresponsive

  - by Sujay Anjankar

  I accidentally cleaned my external HDD by the clean command in Diskpart and got a full sized heart attack after that. I did some research and I have tried a number of tools already. To name a few: Testdisk Recuva Partition Find and mount Eassos Recovery I have even tried some other dumb sounding tools, but none of them could find the lost partition. They just show "no partition found". Testdisk shows Partition sector doesn't have the endmark 0xAA55. The file recovery softwares list the files, but none of them seem to be able to restore the lost partition. I need to recover the disk as it was. Any help would be much appreciated!

  Read the article

• Installing Windows 7 upgrade version on a clean disk

  - by BobMarley

  Is it possible to install the much cheaper Windows 7 upgrade version on a clean disk? What information will I need? 1) Will the Windows 7 installer ask me for my XP license key? or 2) Will the Windows 7 installer only run if it can detect an existing XP installation? Furthermore, what will happen if my disk crashes and I need to reinstall in the future? Will I need my XP license key again?

  Read the article

• Diagnosing high CPU waiting

  - by Will

  I have a monitoring server that is running icinga/collectd/graphite with about 50 hosts. I have noticed high load/slugging performance on the box. If you take a look at top, you'll see: Cpu(s): 0.6%us, 0.2%sy, 0.0%ni, 7.6%id, 23.4%wa, 0.0%hi, 0.2%si, 0.0%st Notice the HUGE %wa value, which as far as I know means a network or disk bottleneck. ifconfig shows no dropping packets and there's not a ton of bandwidth going on, so that leaves disk issues, right? There's not a lot of disk writing going on either...iotop is reporting we're only writing a little over 1 MB per second and the RAID tool reports everything is A-OK and write caching is enabled. How do I go about trying to figure out how to fix this? UPDATE: iostat -x output is: avg-cpu: %user %nice %system %iowait %steal %idle 0.62 0.10 0.31 9.65 0.00 89.31 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.21 33.34 83.55 16.54 1599.94 399.07 19.97 43.21 416.98 3.71 37.13

  Read the article

• Idling CPU at 65C, re-place or re-paste?

  - by Event_Horizon

  Replaced Graphics card because screen would go black at a certain temp while gaming, but sound would stay on (but locked up). Then with replacement card whole PC shuts off during gaming now because the CPU is overheating. Note: CPU is only supposed to go up to 71C max according to manufacturer and it goes well over upon load. System Temp: 30C TL;DR: Idling CPU at 65C, started to shut down due to overheating, re-place (CPU, or CPU and Motherboard) or re-paste?

  Read the article

• Asus V1S/V1V inverter cable

  - by Bill

  I have an Asus V1V, which is the same as the Asus V1S except for the video card. I have a problem where the screen will randomly lose brightness or flicker between being lit and not lit. The picture below is of the left hinge, with the cover removed. Pressing one of these cables affects this behaviour, and pressing it in place will resolve the issue for a few hours. To me this means the inverter cable is damaged. As the picture shows, there are two cables, an LCD cable and what I assume is an inverter cable. I purchased an LCD cable for my model of laptop, but have been unable to find an inverter cable. It seems not to exist. I would like some input on if an inverter cable actually exists, if it is likely the problem, or solutions in general to resolve this problem permanently.

  Read the article

• DEBIAN minimum hard disk footprint

  - by user41072

  Hi, I found this http://serverfault.com/questions/29071/red-hat-server-minimal-install question while searching google for debian minimal install. User shylent wrote thet he uses really basic debian install so small that processes can count on one hand fingers :D. So Im searching and asking for starting point to create basic linux distro but not from scratch like LFS but make linux distro based on debian for example. I used debootstrap but still it is 150M large.

  Read the article

• Has the hardware in my modem gone bad?

  - by Tyler Scott

  I contacted CenturyLink about my modem recently and received useless and unrelated information. The problem seems to be that the modem will no longer save settings, the web interface is unusable except in internet explorer for some reason, and the modem keeps resetting. CenturyLink claimed it had to do with signal strength but I checked and it is currently between good and outstanding according to this. All of the lights remain green even when it starts acting up and I lose internet and shortly before it crashes and reboots. Does anyone have any idea what is going on or what I can do to fix it? (Asking CenturyLink again is obviously not going to help.) Update 1: Accessing the syslog from the web interface causes a crash. After it reboots, the log looks like as follows: 01/01/1970 12:01:29 AM Ethernet Ethernet client connected ,ip(192.168.0.2), mac(1c:6f:65:4c:6d:3b) 01/01/1970 12:01:38 AM Wireless 802.11 client connected ,ip(192.168.0.18), mac(d0:df:c7:c2:73:ca) 01/01/1970 12:01:41 AM System Event Line 0: VDSL2 link up, Bearer 0, us=20128, ds=40127 01/01/1970 12:01:43 AM dhcp6s[2028] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 01/01/1970 12:01:50 AM dhcp6s[2469] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 01/01/1970 12:01:52 AM radvd[2306] poll error: Interrupted system call 01/01/1970 12:01:56 AM PPP Link PPP server detected. 01/01/1970 12:01:56 AM PPP Link PPP session established. 01/01/1970 12:01:56 AM PPP Link PPP LCP UP. 01/01/1970 12:01:56 AM System Event Received valid IP address from server. Connection UP. 06/05/2014 08:16:01 AM radvd[2511] poll error: Interrupted system call 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:04 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:04 AM dhcp6s[3236] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 06/05/2014 08:16:08 AM Wireless 802.11 client connected ,ip(192.168.0.7), mac(44:6d:57:c4:d7:08) I also get it to crash on various other pages. I am guessing the web server is unstable.

  Read the article

< Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >