Search Results

Search found 6898 results on 276 pages for 'messages'.

Page 135/276 | < Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >

  • How to detect hard disk failure?

    - by Devator
    So, one of my servers has a hard disk failure. It's running software RAID, the system locked up and according to /proc/mdstat (and /var/log/messages), it's really down: Personalities : [raid1] md2 : active raid1 sdb2[1] 104320 blocks [2/1] [_U] md5 : active raid1 sdb5[1] 2104448 blocks [2/1] [_U] md6 : active raid1 sdb6[1] 830134656 blocks [2/1] [_U] md1 : active raid1 sdb1[1] 143363968 blocks [2/1] [_U] and Nov 5 22:04:37 m38501 smartd[4467]: Device: /dev/sda, not capable of SMART self-check However when I do smartctl -H /dev/sda, it passes the test. It also passes the test with smartctl --test=short /dev/sda. So, is smartctl a broken testing tool, or am I doing something completely off?

    Read the article

  • Win 7 BSOD stucks at dumping

    - by AFO
    Recently Ive been getting frequent bsods, which always gets stuck at dumping without finishing it, with most of them showing no error messages. This never happened before i upgraded to new rams, but 2 passes of memtest86 turned out fine. Tried reinstalling windows, problem still there. Tried initiating a manual crash, and that did create a successful dump. The SSD win 7 is on doesn't seem to have any problems, crystaldisk says its healthy. Varied the cpu multiplier between stock and +500Mhz, crashed regardless. Left voltage control to auto. Im fairly sure its a hardware problem, just cant pinpoint which specific part(s). The specs- Windows 7 x64 (1 day old) 955 x4 BE c3 (running at stock) (3.5 years old) GA-970A-D3 (1.5 years old) Gigabyte 6950, unlocked to 6970 (still at 6950 speeds) (<3 years old) 2x4GB 1600 CL9 HyperX Blu (running at 11-11-11, default motherboard setting) (<1 month old) Plextor M5s (around 5 months)

    Read the article

  • Gratuitous CRLF in Subject: line - why is it there, and is it legal?

    - by MadHatter
    I'm running into a problem with a NAGIOS system sending emails to a popular email-to-SMS service. The email-to-SMS service takes emails with text in the Subject: line, and sends them on to the mobile number encoded in the To: field. So far so good. Sadly, sendmail (and postfix before it) seem to be inserting a gratuitous CRLF into the (necessarily long) Subject: line, and that's causing my SMS messages to be truncated at the CRLF if and only if the Subject: line contains one or more colons past the gratuitous CRLF. I am confident that the messages are being created correctly, but just to be sure, here's me creating a completely noddy test message to myself, with a long Subject: line: echo "foo" | mail -s "1234567 101234567 201234567 301234567 401234567 501234567 601234567 701234567 801234567 90123456789" [email protected] Note there's no extra colon in this Subject: line; all I'm doing here is showing that an extra CRLF is inserted on the wire. Here's the result of sudo ngrep -x port 25: 44 61 74 65 3a 20 46 72    69 2c 20 33 31 20 4d 61    Date: Fri, 31 Ma 79 20 32 30 31 33 20 31    30 3a 34 33 3a 35 35 20    y 2013 10:43:55 2b 30 31 30 30 0d 0a 54    6f 3a 20 72 65 61 70 65    +0100..To: reape 72 40 74 65 61 70 61 72    74 79 2e 6e 65 74 0d 0a    [email protected].. 53 75 62 6a 65 63 74 3a    20 31 32 33 34 35 36 37    Subject: 1234567 20 31 30 31 32 33 34 35    36 37 20 32 30 31 32 33     101234567 20123 34 35 36 37 20 33 30 31    32 33 34 35 36 37 20 34    4567 301234567 4 30 31 32 33 34 35 36 37    20 35 30 31 32 33 34 35    01234567 5012345 36 37 0d 0a 20 36 30 31    32 33 34 35 36 37 20 37    67.. 601234567 7 30 31 32 33 34 35 36 37    20 38 30 31 32 33 34 35    01234567 8012345 36 37 20 39 30 31 32 33    34 35 36 37 38 39 0d 0a    67 90123456789.. 55 73 65 72 2d 41 67 65    6e 74 3a 20 48 65 69 72    User-Agent: Heir 6c 6f 6f 6d 20 6d 61 69    6c 78 20 31 32 2e 34 20    loom mailx 12.4 37 2f 32 39 2f 30 38 0d    0a 4d 49 4d 45 2d 56 65    7/29/08..MIME-Ve 72 73 69 6f 6e 3a 20 31    2e 30 0d 0a 43 6f 6e 74    rsion: 1.0..Cont 65 6e 74 2d 54 79 70 65    3a 20 74 65 78 74 2f 70    ent-Type: text/p 6c 61 69 6e 3b 20 63 68    61 72 73 65 74 3d 75 73    lain; charset=us About half way down (marked in bold+italic), between the 501234567 and the 601234567 in the original Subject: header, you can see a CRLF being inserted (0x0d 0x0a, on the left-hand side hex dump, .. on the right-hand side plain text). The receiving MTA seems happy to post-process this, and when I look at the on-disc stored mail at the receiving end, I see only a LF (0x0a) in the Subject: line, and the line is parsed correctly and in its entirety by, eg, alpine. Nevertheless, the CRLF is there on the wire, and between me and the (excellent) email-to-SMS support people, we've established that these are the cause of the problem. So my question is: is it lawful for an MTA to insert a gratuitous CRLF on the wire? If it is, and I can prove it, then it's the email-to-SMS house's problem, because they are being intolerant. If it isn't, or it is but I can't prove it, then it becomes my problem, so an answer with references would be most useful. Edit: I can now come clean that the email-to-SMS service in question is kapow. Once this problem was explained to them, they got it, worked with me to develop and test a fix, and have deployed the fix. My long subject lines with colons in now get relayed correctly into SMSes. I don't normally trumpet individual companies, especially not on SF, but I thought it worthy of note that kapow Did The Right Thing. (Disclaimer: I have no connection with kapow except as a paying customer who's happy about the way they dealt with his problem.)

    Read the article

  • Sending single emails works, but sending to the same email in a distribution list is bounced

    - by EvilChookie
    I'm running an Exchange 2003 server on a Telstra Business internet connection (in Australia). I'm routing emails through the SMTP connecter, using the host smtp.telstrabusiness.com When users send single emails to a single recipient, the emails are sent correctly. However, when users send emails to a distribution list, they bounce back with: The message could not be delivered because the recipient's destination email system is unknown or invalid. Please check the address and try again, or contact your system administrator to verify connectivity to the email system of the recipient. One of the people in the list was able to recieve a single email from us just a few minutes afterwards, but did not recieve any of the email that should have come from the distribution list. Is there a way I can throttle the number of messages that Exchange will send at a time, so as not to appear as spam to Telstra?

    Read the article

  • Why did cherokee-admin-launcher crash?

    - by DarenW
    I'm trying out the Cherokee http server on a seemingly fine machine. Following simple set-up instructions, I tried running cherokee-admin-launcher but it printed error messages and hung up. Ctrl-C did not kill it; I had to kill -9 it from another xterm. OTOH, cherokee-admin ran fine (or at least got a lot further). What is the problem with python and cherokee-admin-launcher, and how to fix it? [root@iron rc.d]# cherokee-admin-launcher Checking TCP port 9090 availability.. OK Launching: LD_LIBRARY_PATH=/usr/lib /usr/sbin/cherokee-admin Exception in thread Thread-1: Traceback (most recent call last): File "/usr/lib/python2.7/threading.py", line 530, in __bootstrap_inner self.run() File "/usr/bin/cherokee-admin-launcher", line 209, in run return self._run_guts() File "/usr/bin/cherokee-admin-launcher", line 217, in _run_guts env=self.environ, close_fds=True) File "/usr/lib/python2.7/subprocess.py", line 672, in __init__ errread, errwrite) File "/usr/lib/python2.7/subprocess.py", line 1202, in _execute_child raise child_exception OSError: [Errno 2] No such file or directory ^C ^C

    Read the article

  • Internal users can't receive email sent by application

    - by jdballard
    We have an application server that hosts a CRM application. It is using SMTP on it's own server to send emails. If I send an email using the application to [email protected], it shows up in my inbox. If I send an email to [email protected], it never shows up. It doesn't matter what address I put in for @MyCompanyDomain.com, they never get through. Any email addresses outside our domain/firewall get through. We're using Exchange 2007 and when I look at the message tracking logs, the missing messages don't show up there, either. Is there something I need to configure in Exchange or the SMTP server on the application server? I can't figure out why emails get outside the firewall but internal emails never show up. Thanks, Jeff

    Read the article

  • iChat can't authenticate to Lion Server 10.7.2 [migrated]

    - by glenstorey
    I've enabled iChat and iCal Server through our local 10.7.2 Server which has DNS set up correctly. I can add the server account via a client's System Preferences (under other - Mac OS X server) and it authenticates with my shortname correctly. However, when I load iChat, I get this error message: Where the account is [email protected]. The password and username is correct. Console throws this error: 22/11/11 3:03:31.135 PM imagent: [Warning] XMPPConnection: Error: Error Domain=XMPPErrorDomain Code=105 "The operation couldn?t be completed. (XMPPErrorDomain error 105.)" UserInfo=0x7f81bbe2a3e0 {XMPPErrorText=service requested for unknown domain} DNS is set up correctly (it's working for Profile Management, Software Update Server and Web Services) but I can't get iChat to work correctly. How can I get clients to authenticate? FYI: It's probably worth noting that I get the exact same error messages when I use [email protected] instead of [email protected]. Also posted this question on Apple Discussion here.

    Read the article

  • How to send a popup message to unknow computer connected to my WLAN?

    - by Leandro
    Is there any way to send a popup message from a Linux systen to a "random" laptop/tablet/mobile linked to my Wireless network ? For example, if I let my WLAN open and I see a not recognized computer connected to it, is there anyway to send to that device a message ? On the other hand, if I am connected to someone else open network and they may or may not be aware that their network is open, can I send them a message warning that I am accessing their network? Probably for a completely "random" device the answer should be no. But if we restrict to laptops with Win7 or Linux SO is there any service running by default on such systems that allows one to send such popup messages ? PS: I have no practical motivation for this question. This is only a curiosity.

    Read the article

  • Windows 2008 DHCP service fails - "...failed to see a directory server for authorization."

    - by ewwhite
    I have a small environment running Windows 2008 R2 where the DHCP service on the domain controller fails every two weeks. The most-visible error is Event ID 1059 and the Event Viewer message is: "The DHCP service failed to see a directory server for authorization." The setup features two domain controller and the usual services and roles (file, print, Exchange). Restarting the service fails for a variety of reasons. I've had the following messages at different times: "Not enough storage is available to complete this operation". "Unable to determine the DHCP Server version for the Server 192.168.x.x" "The DHCP service has detected that it is running on a DC and has no credentials configured for use with Dynamic DNS registrations initiated by the DHCP service." A reboot of the domain controller resolves the issue for ~2 weeks. The systems are virtualized and there are no network connectivity issues. Any ideas what's happening here?

    Read the article

  • Getting my IP off the hotmail blacklist

    - by Kai
    I got a new server with a new IP address. Apparently this IP is listed in the hotmail blacklists so that I can't send mails to hotmail users out of my webapplication. postfix/smtp[24706]: 8F31C9404B: to=<[email protected]>, relay=mx3.hotmail.com[65.55.37.88]:25, delay=0.66, delays=0.01/0/0.48/0.16, dsn=5.0.0, status=bounced (host mx3.hotmail.com[65.55.37.88] said: 550 SC-001 Unfortunately, messages from 78.47.228.xxx weren't sent. Please contact your Internet service provider since part of their network is on our block list. You can also refer your provider to http://mail.live.com/mail/troubleshooting.aspx#errors. (in reply to MAIL FROM command)) My hoster will not help me get that address removed from the blacklist. So I tried to find a way to do it on my own, but I can't find a way to ask Microsoft to remove my IP from that list. Has anyone managed to remove a falsely listed address? And if yes: how?

    Read the article

  • apticron, apt-get dist-upgrade and aptitude

    - by Kai
    I'm confused, on my debian server I've gotten the daily "updates available" message by apticron. I normally then just use aptitude to install the upgrades. Today I got a message which shows two upgrades. But they don't show up in aptitude. When I do a apt-get dist-upgrade they show up as "NEW" packages to be installed. aptitude dist-upgrade seems to ignore them. Can anyone explain to me why this is happening and how to get rid of the messages (It doesn't seem like I really need the new packages)

    Read the article

  • IE6 blocking all intranet cookies.. please help

    - by BillMan
    So today, IE6 just suddenly started blocking cookies in my local intranet. It accepts cookies from the internet zone just fine. I tried overriding all the cookies policies with no help (adding my site, etc). When looking why the cookies are blocked, I get messages saying that "IE couldn't find privacy policy for http://mysite...". This is killing me.. been reading a couple knowledge base articles about deleting registry keys, and nothing has worked. Any help would be appreciated. Probably related, I was using the IE developer toolbar yesterday to test the behavior of browsers with cookies disabled. Now the option to disable cookies just has a "-" next to it. I removed the toolbar to see if that helped.. nothing..

    Read the article

  • Mutt seems to sync to Gmail IMAP only on quit

    - by Sergey
    I am using Mutt 1.5.20 in Mac OS X Terminal. I have a Google mail account whose mail I fetch via IMAP. I also use a Gmail notifier app to notify me of new e-mail messages. My experience with Mutt dates no later than 1 week. The trouble is this: When my Gmail notifier tells me about a new e-mail, I hit the Terminal to open Mutt. I can read the message and Mutt will mark it as read. However, Google's servers are not told that the message is read until Mutt is closed. Thus, my Gmail notifier continues to show a misleading unread count. How can I force Mutt to synchronize with IMAP without having to quit every time I finish reading my e-mail? Preferably the sync will occur instantaneously, but a periodic sync would be satisfactory as well.

    Read the article

  • Can't see attachments in OWA but can in Outlook

    - by johnny
    Hi, I have several users, including myself, that cannot see attached images (.jpg) in OWA. I can see them in Outlook but in OWA the attachments, the link to see them, are not included. I see the line for attachments in the message. But it's just empty. I have other messages that have been sent to me from outside of the domain and I can see them. Just not internally sent ones. Was hoping for help. Thank you. I did not see anything in the file levels of the registry to prohibit .jpg files. Exchange 2003 Server, Outlook 2003, OWA for 2003.

    Read the article

  • Installing GitBlit GO as Service in Ubuntu Server 14.04

    - by Luis Masuelli
    I downloaded it (version 1.6.0), unpacked it in /opt/gitblit (ubuntu server 14.04.1), configured http to 8280 and disabled https assigning 0 (I expose it by https using nginx). I created gitblit user and added it to 'sudo' group by running: sudo adduser gitblit sudo (gitblit user has a strong password). I installed it as a service by running: /opt/gitblit/install-service-ubuntu.sh. I tried to start it by running: sudo service gitblit start. The message Starting gitblit server appears. It's the only message. When I hit -in the same local machine- http://127.0.0.1:8280, the connection could not be made. When I run sudo netstat -anp | grep 8280, nothing appears. I see no error messages, but the server is not starting. Question: What am I missing?

    Read the article

  • Redmine: reposman.rb succeeds, but does not make SVN repos available to projects

    - by Joey Adams
    I'm testing reposman.rb on the command-line (before I make it a cron job): /usr/sbin/reposman.rb --svn-dir=/var/svn \ --redmine-host=http://example.com/projects --key='redacted' \ --owner='nobody' --group='nobody' It succeeded, printing messages for projects that didn't have repos yet: repository /var/svn/project1 created repository /var/svn/project2 created And printed nothing after running the same command again, indicating it remembered the repos. However, if I look at the Repository settings in Redmine for project1 and project2, they aren't set. Although the SVN repo is created, the Redmine projects aren't configured. How do I get reposman.rb to automatically configure Redmine projects to use the repos after they're set up?

    Read the article

  • Sql Server database logs "missing"

    - by linkerro
    Here's the problem we're having: In the applications that are using the databases we get errors like: The log for database 'redactedDatabaseName' is not available. Check the event log for related error messages. Resolve any errors and restart the database. Cannot close event log because there are still event handle users active. The server log says this: Error: 9001, Severity: 21, State: 1. Context: The server in question is holding databases for a multi-tenant application and lately it's been under quite heavy loads. It has something like 3k small databases on it and these errors have been coming in the last week. We have a work-around right now, which is taking the database offline then bringing it online again. Any ideas why this is happening and how we can fix it?

    Read the article

  • Minimize the chance my email is blocked/filtered as spam

    - by justSteve
    I'm running a web-based store where order confirmations are sometimes blocked and don't reach the intended user. The structure of the business model is such that our product is marketed to the end-user by a 3rd parities - affiliates how are known entities to the end-users and email is freely exchanged between end-users and our affiliates. Our confirmations being blocked is becoming a big enough problem that we are considering implementing a system where a 'confirmations' address is created within the affiliates domain, then we'd have our app send via the affiliate's mail server instead of our own. But that'd be lots of work. The idea has been raised to have our app use our affiliates' email in the FROM field but still send from our server. My thinking is that would be detected at the end-users side and blocked just as often - we dealing with institutions large enough at least some checks up at the perimeter. Is this assumption correct (more likely to be blocked) or is there a less round about way to send messages under the auspices of 3rd parties? thx

    Read the article

  • How do I enable SELinux when booting from a CD/DVD?

    - by JeffG
    I have a bootable DVD which boots the same Kernel as the Hard Drive (which uses SELinux). I have copied /etc/selinux and all the kernel modules to my ramdisk, and have tried both selinux=1 and selinux 1 as Kernel boot parameters. After the system boots, I check dmesg: % dmesg | grep -i selinux Kernel command line: initrd=idrd.img ramdisk_size=110476 selinux=1 SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability SElinux: Registering netfilter hooks But SELinux isn't running: % /usr/sbin/getenforce Disabled % /usr/sbin/setenforce 1 /usr/sbin/setenforce: SELinux is disabled /var/log/messages does not hold any clues. /proc/kmsg also has nothing

    Read the article

  • Auto-responder rule in Outlook 2010 produces double signature (but only to certain emails)

    - by Austin ''Danger'' Powers
    I have set up an auto-responder in Outlook 2010 using a custom template, as a staff member will be on vacation for 6 weeks. It works perfectly, apart from the fact certain people receive two signatures at the bottom of the message instead of one. When reviewing the "sent" folder, there is no sign of double signatures. In the custom template, there is only 1 copy of the signature. Signatures are set to be applied automatically to new messages or replies- however, if I remove the signature from the template, then it seems no one receives a response with the signature. People sending from Hotmail accounts do not receive a duplicate signature. Gmail users do see a duplicate signature. Does anyone have any idea what could be causing this?

    Read the article

  • Proper way for changing MAC address in a linux VM?

    - by HappyDeveloper
    I tried to change the MAC address in a ubuntu VM (virtualbox), but after that it threw lots of errors during boot, and then I had no internet connection. Then I saw that the interface was renamed to eth1, so I edited /etc/network/interfaces to change eth0 to eth1, rebooted (didn't know how to restart the network), and boot was now faster and internet worked fine. But now after every time I log in, I get 1 or 2 error messages that say nothing, they only ask me if I want to report them. So I was wondering, is there was a proper way to change MAC address, to avoid these issues?

    Read the article

  • Virus sending phishing emails through exchange server

    - by therulebookman
    It appears that there is a virus on my network somewhere that is sending phishing emails through my exchange server. I can see the messages in message tracking and I see many SMTP errors for NDR's and rejected connections from external servers, but I do not see any SMTP authentications and I have logging up to MAX. How can I find the IP or hostname of the PC that is infected? Or is there some other explanation than virus? Anti-virus scan on server is clean. Server is not an open relay. Thanks

    Read the article

  • Disk full, du tells different. How to further investigate?

    - by initall
    I have a SCSI disk in a server (hardware Raid 1), 32G, ext3 filesytem. df tells me that the disk is 100% full. If I delete 1G this is correctly shown. However, if I run a du -h -x / then du tells me that only 12G are used (I use -x because of some Samba mounts). So my question is not about subtle differences between the du and df commands but about how I can find out what causes this huge difference? I rebooted the machine for a fsck that went w/out errors. Should I run badblocks? lsof shows me no open deleted files, lost+found is empty and there is no obvious warn/err/fail statement in the messages file. Feel free to ask for further details of the setup.

    Read the article

  • Converting Outlook Express csv adress book and dbx files into Thunderbird on W7

    - by PiotrK
    Recently I changed my OS from XP to W7. I made backup of any Outlook Express messages (the dbx files and adress book as CSV). On W7 I want to import that data into Thunderbird. There is option for importing from Outlook Express, but it is looking for live application data (I can't specify directory with real files myself) and there is no Outlook Express installed on W7 so I can't just import it back to it and then into Thunderbird. How can I import that data into Thunderbird?

    Read the article

  • Getting MSExchange transport Error on Server 2003 SP2

    - by Scott
    I am getting the following Error messages and do not know how to fix it. Event Type: Error Event Source: MSExchangeTransport Event Category: (8) Event ID: 3017 Date: 4/29/2010 Time: 1:21:12 PM User: N/A Computer: NETSRV Description: A non-delivery report with a status code of 5.3.5 was generated for recipient rfc822;[email protected] (Message-ID <19104335.51321272561635734.JavaMail.SYSTEM@PARROT). Causes: A looping condition was detected. (The server is configured to route mail back to itself). If you have multiple SMTP Virtual Servers configured on your Exchange server, make sure they are defined by a unique incoming port and that the outgoing SMTP port configuration is valid to avoid looping between local virtual servers. Thanks for any help you can provide.

    Read the article

< Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >