Search Results

Search found 4731 results on 190 pages for 'ram rachum'.

Page 136/190 | < Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >

• ubuntu 12.04 LTS hangs on boot when external monitor is connected

  - by vladeta

  I have a problem with my fresh installed Ubuntu 12.04 LTS on my Dell M4600: nVidia quadro 2000M i7-2860 16GB ram 128GB SSD Dell/Samsung 750GB HDD IPS RGB laptop display When it is connected via DP++ to the external Dell U2311H monitor, it hangs on boot or when wakening from suspend. If I detach the DP cable it boots normally. I have tried all combinations that I have found, as adding to grub: "no splash", "boot=pci", "acpi=off", etc... I have also changed in nVidia X settings that external monitor is the primary one and also tried to delete monitor.xml file. There is no change it hangs each time after grub. It starts to load daemons then both screens are blank and then completely hangs with beep sound. What I discovered is if I detach the cable and wait for about 2 sec after grub starts booting and then physically connect DP cable while the Ubuntu is still booting everything works normally and I have a picture on my external screen while the laptop screen is off, just as I wanted. Do you maybe know how to solve this issue? Thank You.

  Read the article

• Ubuntu running like mud, system hangs and looks like its running at 3FPS

  - by user240803

  the system specks: AMD XP 3200+ 1GB DDR 333 RAM 160 GB HD IDE NVIDIA FX 5500 AGP Video Card Compaq Presario sr1230nx the system takes forever to boot and when it does it runs like total mud, reminds me of an overloaded system that has too many windows open or something... fresh install tried soo many thing like new memory (it had 512 stick) a new video card (onboard 8mb sis sounded like the problem, but wasn't... has gotten a little faster now but not by much) tried to disable all the things on the motherboard that could be, with no help... this machine runs windows XP, 7, and 8 JUST FINE!!! I mean for a single core CPU WIN8 runs AWESOME!!! BUT I already have a Gaming Desktop that has Windows 8 pro I want a Linux machine to get some time in and learn a few things... I want Ubuntu because of the Software center so I can install things I want until I am familiar with the command line.. I've worked on Computers since I was 12 I remember some of the DOS commands but I guess these are a little different... anyway any ideas? Ive also tried both drivers for the NVIDA card and that didn't help either... its not the card since it did this with both the NVIDA card and the SIS onboard... it also does this on live mode with the USB so I don't think its the HardDrive... I'm running out of options of hardware to try... I know this version of Linux works cuz Ive booted it on other machines and it ran great... what is with this Compaq? here is a vid of exactly what its doing... let me know if you need anything else I am right by the comptuer tonight so ask anything... http://youtu.be/-P-XNo81098

  Read the article

• The Evolution of Computer Keyboards

  - by Jason Fitzpatrick

  While the basic shape of keyboards has remained largely unchanged over the last thirty years, the guts have undergone several transformations. Read on to explore the history of the computer keyboard. ComputerWorld delves into the history of the modern keyboard, including the heavy influence IBM’s extensive keyboard research on early keyboards: As far as direct influences on the modern computer keyboard, IBM’s Selectric typewriter was one of the biggest. IBM released the first model of its iconic electromechanical typewriter in 1961, a time when being able to type fast and accurately was a highly sought-after skill. Dag Spicer, senior curator at the Computer History Museum, notes that as the Selectric models rose to prominence, admins grew to love the feel of the keyboard because of IBM’s dogged focus on making the ergonomics comfortable. “IBM’s probably done more than anyone to find [keyboard] ergonomics that work for everyone,” Spicer says. So when the PC hit the scene a decade or two later, the Selectric was largely viewed as the baseline to design keyboards for those newfangled computers you could put in your office or home. Hit up the link below to continue reading about how the Selectric influenced keyboards throughout the 1980s and what replaced the crisp clacking of early IBM-styled models. 6 Ways Windows 8 Is More Secure Than Windows 7 HTG Explains: Why It’s Good That Your Computer’s RAM Is Full 10 Awesome Improvements For Desktop Users in Windows 8

  Read the article

• Weird system freeze. Nothing works keyboard/mouse/reset button - Ubuntu 12.04 64bits [closed]

  - by Simon

  I have fresh PC: i5 3570K with Intel 4000 onboard ASrock Z77 Extreme4-m 8GG RAM - Adata 1333Mhz... 1TB Seagate drive 7200rpm I've also fresh systems - Ubuntu/Win7 and today there was something strange. Ubuntu twice just freezed. Everything stopped, even keyboard and mouse wasn't responding. Even RESET button didn't work. Right now memtest is running, but I'd like to know, where else can i look for cause. Can it be software fault if even reset isn't working? Only long reset pressing rebooted PC... I'm a bit confused. Or should I test components - CPU, motherboard, disk. Which logs in Ubuntu should I check to diagnose cause? EHm I had few adventures with this PC already. Shipped motherboard was broken (ASrock Z68 Extreme3) and had old bios, so I had to contact with reseller, replace it and at the end decided on Z77, but everything took 3 weeks, so I have bad feelings... Edit: Both freezes were during editing something in gedit (it can be coincidence) and after few updates today - when memtest is end I'll check what was updated

  Read the article

• Ubuntu Boot Slow - Late Drive Access

  - by Mo2

  So I just installed Ubuntu on a brand new Samsung 840 Pro SSD and have noticed that it is slower than expected. The LED access light doesn't start blinking until after 20 seconds or so have passed, after which the boot up seems to actually start. Does anyone have any ideas as to why this is happening? I have Windows 7 installed on a separate SSD and use Windows Loader as the main loader. Windows Loader points to GRUB2, from which I then start Ubuntu up. The 20 seconds count that I mentioned earlier starts AFTER I select Ubuntu 14.04.1 from the GRUB2 menu. Any help is appreciated. EDIT: I forgot to mention that I have only one partition for / and /home. I intend on using a shared NTFS drive for my documents and other personal files, so I had no need for the /home. I did not make a /swap since I have 12 GB of RAM. I also did not make a /boot since I was told that it's not really necessary in my case.

  Read the article

• How do I left-click a Java Application on a WeTab running Ubuntu 12.10? (workaround defect in Onboard)

  - by Kat Amsterdam

  I installed Ubuntu 12.10 on my weTab. Everything works perfectly (albeit slowly) and I can touch and use every application execpt ones written in Java. When I start any Java Application the touchscreen does not recognize the left click. I believe it's a problem in OnBoard (the onscreen keyboard) because when I touch the mouse icon on the OnBoard and then the Java Application the left click works. This is very cumbersome for every click to first hit OnBoard mouse icon and then button in the Java app I would like to click. It defeats the purpose of a touchscreen. The Java Application is definitly touchable as it's running on 10 other machines with Elo Touchscreen. How do I get Ubuntu to recognize the left click in a java application automatically when I touch the screen? Or a way to dignose this so I can make a clear bug report? This happens in all the desktop environments (Gnome/Unity, XFCE4 and LXDE) I tried with openjdk-6-* and openjdk-7-* Stats: WeTab 32GB 3G 2GB RAM Intel(R) Atom(TM) CPU N450 @ 1.66GHz - 64-bit Ubuntu 12.10 - 64 bit Unity Desktop environment Xubuntu Desktop environment Lubuntu Desktop environment The real touchscreen driver from EETI (eGalaxy) (also didn't work with the Ubuntu standard touchscreen driver)

  Read the article

• Acer Aspire 5542G overheating with ubuntu/kubuntu 12.04

  - by james

  I have an Acer Aspire 5542G laptop purchased couple of years ago. All these days, i used windows 7 on it . Then I tried ubuntu 12.04 . Everything was fine except the overheating issue. I updated ubuntu with all security fixes and available updates but nothing solved the problem. With idle use like internet browsing, the cpu fan speeds up a lot and i can feel very hot air coming from the vent (comparable to playing serious 3d game in windows). But it will not go to a point of freeze and shutdown. But as long as im using it, with no intensive tasks at all, the laptop stays too hot. This wasn't the case with windows7. In windows 7 the fan will not rotate at all with normal use. I heard there was manufacturing defect with some acer laptops, but i think it wasn't the case with my laptop since windows7 runs perfectly. I updated the bios to latest version. I cleaned dust in the vents. I tried kubuntu 12.04 up-to-date. Nothing solved the issue. My laptop specs are: CPU : AMD turion2 x2 M500 @ 2.2GHz GPU : AMD Mobility Radeon HD4570 3GB RAM and 320GB hard disk.

  Read the article

• Colored Collision Detection

  - by tugrul büyükisik

  Several years ago, i made a fast collision detection for 2D, it was just checking a bullets front-pixel's color to check if it were to hit something. Lets say the target rgb color is (124,200,255) then it just checks for that color. After the collision detection, it paints the target with appropriate picture. So, collision detection is made in background without drawing but then painted and drawed. How can i do this in 3D? Because, a vertex is not just exist like a 2D picture's pixel. I looked at some java3D and other programs and understood that 3D world is made of objects. Not just pictures. Is there a program that truly fills the world with vertices ? But it could be needing terabytes of ram even more. Do you know an easy way to interpolate the color of a vertex in java3D or similar program? Note: for a rgb color-identifier, i can make 255*255*255 different 2D objects in background.

  Read the article

• can't get a good install:11.10 server

  - by jack

  I screwed up my partitioning aparently tring to get lvm and raid1 going. the machine is an intel dual core dt with 2 gig of ram and 2 sata drives, one 250g and the other 500g. This a build for my school in n.e. Thailand. we have 20+ clients now, a website, email. Our old server is dying fast and we are going to add another 12 stations next week. I really need some help here! 1. have onboard gigabit ethernet that aparently uses same driver as realtek 811c. I installed a pcie gigabit card also 811c. At several points the eth0 has accessed the internet fine, but the eth1 will not communicate. 2. I saw a "fix" for this online which from root: rmmod r8169. this imediately killed the working onboard card. 3.I tried to re-install 11.10 figuring that would re-install r8169. However I messed something up in my partitioning and can't get a clean boot now. 6. so I think after 12 re-installs or so and 2 days. I can get through it right if I can start over with clean drives, but I can't figure out how to empty them out what with soft raid and lvm partitions. seems like i've had it going well and then trying to fix that one little problem, i go backwards.Please help! please send email.-thanks

  Read the article

• Kubuntu 11.10 very slow during file I/O

  - by dko

  After updating to Kubuntu 11.10, my file I/O performance has slowly just gotten worse and worse. It is to the point where I'm getting 1 MB/s write/read speeds to the drive. If I download something, the whole machine becomes unresponsive for at times up to 30 seconds. This usually causes a timeout in the download and the download then stops. Even extracting archive files, while extracting the computer is just unusable on top of the terrible read/write speeds. It isn't the drive as I have Windows installed as well and when I boot to it I have no issues with the drive. I did not have this issue using Kubuntu 11.04 and am thinking of downgrading. However, I'd much rather help out the Ubuntu community by working through these issues. I'm starting to lean towards the new Linux Kernel is just not working well with file handles. During file I/O my system usage does pick up, but it is not 100% CPU usage. My system is as follows. Samsung 2 TB hard disk drive AMD Phenom II x6 1055 4 GB RAM (only one in use according to system monitor) ATI 5850 HD

  Read the article

• ksoftirqd uses 100% cpu

  - by andy

  I am running 32bit Ubuntu 10.04. A lot of the times ksoftirqd/0 or ksoftirqd/1 start using up 100% CPU for no apparent reason, and I am forced to reboot my laptop. Incidentally this also happens when I maximize my (youtube) videos on Chrome and Fireox, but once I un-maximize the videos the CPU usage goes down to the original levels. Any ideas what it going on? --- Addendum --- dmesg produces a ~2000 line output. I searched for 'error' and 'warning' in the output, and here are the relevant lines (along with some headers): [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=157dcfda-acd6-4d1b-a6a8-ff9ccff61906 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 24.775546] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended [44920.210518] ata1: SError: { PHYRdyChg CommWake 10B8B Dispar LinkSeq TrStaTrns } [44920.210531] res 40/00:00:f0:4b:7f/00:00:18:00:00/40 Emask 0x10 (ATA bus error) [58673.134623] chrome[20101]: segfault at 7f38bc4ad000 ip 00007f38be769ecc sp 00007fff24616850 error 4 in libpepflashplayer.so[7f38bdc08000+e55000] [ 24.775546] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended [44920.210531] res 40/00:00:f0:4b:7f/00:00:18:00:00/40 Emask 0x10 (ATA bus error)

  Read the article

• Random touchpad and keyboard freezes on new 10.10 installation

  - by ancaleth

  My touchpad and keyboard freeze up on my newly installed Ubuntu 10.10. I was using Ubuntu 10.4 via wubi before on this Laptop where this problem never occurred. (I did not migrate wubi or upgrade to 10.10, it's a fresh start. 64-bit on Dell Studio, plenty of RAM, plenty of free space on partition etc.) I can't say there is a pattern yet, once it happened during the download of packages with the Update Manager, once it was just using Firefox, no other program running. I was forced to shut down manually. In between these crashes the laptop was booted once, updates were installed etc., firefox was used and there weren't any problems. Both crashes should be in the attached kern.log and I noticed there were some error problems before the last crash (at the end, obviously). It seems the wireless was experiencing problems. This wasn't noticed on the user end, since the touchpad + keyboard were already frozen. kern.log: http://paste.ubuntu.com/552617/ How can the freezes be fixed?

  Read the article

• Can certain system-hungry modules be disabled in Ubuntu?

  - by Ole Thomsen Buus

  Hi, Let me add some context: I am currently using Ubuntu 9.10 64-bit (Desktop) on a relatively powerful stationary PC (Intel Core i7 920, 12GB ram). My purpose is highspeed imaging with a pointgrey Grashopper machine-vision camera (for research, PhD project). This camera is capable of 200 fps at full VGA (640x480) resolution. The camera is connected using Firewire (1394b) and the drivers and software from Pointgrey works great. I have developed a console C++ application that can grap a certain number of frames to preallocated memory and after this also save the grapped frames to harddrive. Currently it works fine but sometimes I am observing a few framedrops (1-3). When this happens I reset the experiment and repeat the recording and usually i am lucky the second time with no framedrops (the camera-driver has a internal framecounter that I am using). Question: I usually go to tty1 and use "sudo service gdm stop" to disable the graphical frontend. It seems to release some memory though that is not my main concern. My concern is CPU resources. Are there other system hungry modules that can be disabled temporarily such that the CPU gets less busy on Ubuntu 9.10? At some point in the future I will update to 10.10. Should I perhaps option for the server edition instead? Thanks.

  Read the article

• File browsing on Nautilus extremely slow after upgrade to 12.04

  - by Tobelli

  One month ago I updated (no fresh install) to 12.04. Since then nautilus got extremely slow. When I open a folder that contains many subfolders I sometimes have to wait 4 seconds until everything is displayed. This has never been like that before, in previous versions I could always browse between my files extremely fast. I looked in "additional drivers" and changed from Nvidia current-version-update to the recommended drivers. This drastically increased the performance and speed of file browsing, unfortunately just for a couple of days. Now I am stuck again with the very slow Nautilus. I also tried to install the latest nvidia driver like it was suggested here: http://www.techlw.com/2012/03/install-nvidia-drivers-on-ubuntu-1204.html Did not work at all. Also when using the dash to try to find files it does not respond properly: does not find files or loads for ages until the file is displayed. I am working on an Acer Notebook with Intel® Core™ i5 CPU M 430 @ 2.27GHz × 4 6GB RAM GeForce GT 320M/PCIe/SSE2 64 Bit Ubuntu 12.04

  Read the article

• Ubuntu 12.04 won't shut down - stopping winbind daemon

  - by jan

  My Precise Pangolin sometimes won't shut down - the screen is black with text on it. Mostly last line says something like "stopping winbind deamon" (sometimes also virtualbox, which is above winbind daemon; edit: sometimes the last line says "running unattended updates") and it stays like this for about ten miutes. Then I usually hold the power button for 5s to shut it down. It's very unpredictable - sometimes the computer shuts down without problem and sometimes it hangs. I've tried many ways to shut it down: HW button, panel applet, sudo shutdown -h now, sudo poweroff, sudo halt, etc. even sudo reboot or restart from panel applet have this problem. Sometimes it works ok but every method named hung at least once on the same (damned) line. My specs: FUJITSU SIEMENS LIFEBOOK E8310, Intel Core2 Duo T7300 @ 2.00GHz, 3GB RAM, GPU: Mobile Intel(R) 965 Express Chipset Family Ubuntu 12.04.2 32bit, 3.5.0-41-generic kernel (but it did it on older kernels and 12.04.x systems too). Any ideas what should I try next? Thanks a lot! Jan

  Read the article

• Why is CS never a topic of conversation of the layman? [closed]

  - by hydroparadise

  Granted, every profession has it's technicalities. If you are an MD, you better know the anatomy of the human body, and if you are astronomer, you better know your calculus. Yet, you don't have to know these more advance topics to know that smoking might give you lung cancer because of carcinogens or the moon revolves around the earth because of gravity (thank you Discovery Channel). There's sort of a common knowledge (at least in more developed countries) of these more advanced topics. With that said, why are things like recursive descent parsing, BNF, or Turing machines hardly ever mentioned outsided 3000 or 4000 level classes in a university setting or between colleagues? Even back in my days before college in my pursuit of knowledge on how computers work, these very important topics (IMHO) never seem to get the light of day. Many different sources and sites go into "What is a processor?" or "What is RAM?", or "What is an OS?". You might get lucky and discover something about programming languages and how they play a role in how applications are created, but nothing about the tools for creating the language itself. To extend this idea, Dennis Ritchie died shortly after Steve Jobs, yet Dennis Ritchie got very little press compared to Steve Jobs. So, the heart of my question: Does the public in general not care to hear about computer science topics that make the technology in their lives work, or does the computer science community not lend itself to the general public to close the knowledge gap? Am I wrong to think the general public has the same thirst for knowledge on how things work as I do? Please consider the question carefully before answering or vote closing please.

  Read the article

• Nvidia GeForce Gt-520M-cn on intel dh61ww Ubuntu 12.04

  - by j goseeped

  hi people i hope you can help a little bit , i appreciate your time look: i have a this desktop i7 2600, 8gb ram ddr3, board intel dh61ww, Geforce Nvidia GT520-cn 2Gb ddr3, i just install ubuntu 64bits 12.04 kernel 3.2.0-23-generic , i want to setup two monitors samsung led 22" and get start mi video card 1) i download and installed nvidia driver 295.59 and also try with 302.17 to apt-update and upgrade, apt-get install build-essential linux-headers-$(uname -r), apt-get remove --purge nvidia*, apt-get remove --purge xserver-xorg-video-nouveau, vim /etc/modprobe.d/blacklist.conf blacklist vga16fb blacklist nouveau blacklist rivafb blacklist nvidiafb blacklist rivatv sh NVIDIA.run, sudo service lightdm start, reboot, nvidia-xorgconf 2)after reboot i get 800x600 and nvidia-settings say this. You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run nvidia-xconfig as root), and restart the X server. 3) i change a little bit xorg.conf to set up a resolution to work property 4) i dont have any image in the monito and i dont have any option on Nvidia X server settings lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 520] (rev a1) egrep -i 'glx|nvidia' /var/log/Xorg.0.log [ 12.005] (II) LoadModule: "glx" [ 12.005] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 12.575] (II) Module glx: vendor="NVIDIA Corporation" [ 12.585] (II) NVIDIA GLX Module 302.17 Tue Jun 12 16:22:45 PDT 2012 [ 12.585] (II) Loading extension GLX [ 13.037] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [ 13.044] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event10) [ 13.044] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9) glxinfo | grep direct Xlib: extension "GLX" missing on display ":0.0". Error: couldn't find RGB GLX visual or fbconfig sorry my english is no very well. and thanks guys

  Read the article

• How do I debug xorg/fglrx related system freezes on Ubuntu 12.10?

  - by racerror

  My brand new system is randomly freezing and I don't know how to debug the issue. System: AMD A10-5800k Asus F2A85-M motherboard Integrated Radeon HD 7660D 8gb Samsung ddr3 1600 Ubuntu 12.10 Gnome shell / Unity (issue exists in both) xorg.conf (relevant parts): Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:0:1:0" Option "TexturedVideoSync" "on" Option "UseFastTLS" "2" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "Monitor0" DefaultDepth 24 Option "UseEDID" "False" Option "ExactModeTimingsDVI" "True" Option "NoBandWidthTest" "true" Option "ModeValidation" "AllowNon60hzmodesDFPModes, NoEDIDDFPMaxSizeCheck, NoVertRefreshCheck, NoHorizSyncCheck, NoDFPNativeResolutionCheck, NoMaxSizeCheck, NoMaxPClkCheck, NoEDIDModes" Option "UseEDIDDPI" "False" Option "UseEDIDFreqs" "0" Option "NoLogo" "True" Option "Coolbits" "1" Option "metamodes" "DFP-0: 2560x1440_60 +0+0" SubSection "Display" Depth 24 Modes "2560x1440" EndSubSection I ran memtest on my ram and it checks out fine. I have tried using the latest fglrx and fglrx-beta. I have loaded 3.6.x kernel. I do not see anything relevant in dmesg, kern.log, syslog, .xsession-errors or Xorg.log. I cannot ssh into the machine when frozen from another machine. I know that system resources not being stressed when the crashes happen. It seems that video and any gaming (very simple graphics games) contribute to the freezes most frequently. However, I have experienced the crash before when just using Chrome. I suspect the crashes are xorg/fglrx related, but I have no evidence to back that up. Where should I look? What should I grep for? What should I try next?

  Read the article

• Internet unusably slow with Realtek Semiconductor Co., Ltd. RTL8111/8168B card

  - by user42424

  So I have recently installed Ubuntu 11.10 for a dual boot with wind 7. After the install I had like 300 updates, so I installed them. At first I could use the internet, although it was extremely slow. However now I cannot, sometimes it will load and others it will simply time out. When I try to download something it will either take forever or will not at all. This is a wired system. On Windows side my speeds are fine. Any help would be greatly appreciated. Also like I said I am new to Linux/Ubuntu so please be nice. One last thing, I also installed 11.10 for same dual boot on my laptop, and wireless speed is the same as on Windows? Only the wired desktop gives me the problem? Hear is some hardware info.. Hope it helps. Mobo: Gigabyte GA=880GMA- AMD / CPU: AMD Phenom (tm) IIx4 965 / 16 GB Ram / Realtek PCIe GBE Family Controller / Cisco Linksys E2000 / Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) / eth0 Link encap:Ethernet HWaddr 50:e5:49:33:64:cf inet addr:192.168.1.118 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::52e5:49ff:fe33:64cf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:76722 errors:0 dropped:76722 overruns:0 frame:76722 TX packets:49692 errors:0 dropped:65 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:107956638 (107.9 MB) TX bytes:4342553 (4.3 MB) Interrupt:44 Base address:0x2000 thanks to roadmr problem solved! I powered down PC, un plugged power from pc end, waited a few (maybe 3)minutes. plugged power back in, pushed and held power button for 30 + seconds. Let go, powered on PC, and my Internet is fine! downloads and web speed blaze, just like on my Win 7 boot, maybe even faster. Problem Solved, Thanks to all!! **

  Read the article

• Logitech C510 HD Webcam related question

  - by Ashfame

  I am going to buy Logitech C510 HD webcam and I just checked on other questions here on AskUbuntu that it works out of the box with cheese. My question is can it be limited in any functionality that I would like to do with it? I would like it to be used with everything - Skype, Gtalk video chat, Facebook, Youtube etc I would like the ability to record or do a video call in lesser resolution video (its a 720p one). Also since I read that I should have a Core2Duo 2.2Ghz for 720p but I have a 2.0Ghz one, would it be possible for me to first record it and then encode it after recording if my processor really start giving issue when doing on-the-fly encoding? Anything else that I should consider? I also have a ATI HD 4850 512MB card, if it can help in encoding on-the-fly or is there a chance that my graphics card alone can handle it and those specs were just for a system without a graphics card? I believe so. Also, I got no worries in dealing with console, if I have to do some of the things above in terminal. Other possible significant details: I have a dual screen setup 29" (1360X768) & 22" (1680X1050) which might be using some good power from GPU and I have 2GB DDR2 800Mhz RAM.

  Read the article

• Banshee doesn't like opening websites

  - by Allan

  I have come across two bugs (which will be added to launchpad if it's not resolved here) When I open any of the websites in Banshee Amazon or Miro Guide as soon as the site is finished loading it crashes Banshee. If I play any video local or remote it will show 1 frame maybe 0.5 sec of video then I get a black screen and audio continues in the backgound. Specs & Details I have a Fujitsu Amilo 1718 laptop with 2 gig of ram (original 1 gig) graphics is provided by ATI Radeon Xpress 200M (don't laugh it works with compiz....just) I have a link to the output of banshee --debug Here Don't have time to read? Here are the Highlights [2 Warn 11:52:34.814] Caught an exception - System.ArgumentNullException: Argument cannot be null. then abit later Debug info from gdb: Could not attach to process. If your uid matches the uid of the target process, check the setting of /proc/sys/kernel/yama/ptrace_scope, or try again as the root user. For more details, see /etc/sysctl.d/10-ptrace.conf ptrace: Operation not permitted. ================================================================= Got a SIGSEGV while executing native code. This usually indicates a fatal error in the mono runtime or one of the native libraries used by your application. ================================================================= Aborted Not music to my ears as you can expect. The version I am using is 1.9.4 from the daily ppa but these bugs happen in any version of banshee from 1.8.1 and up. So if any one has come across a fix for this problem please share!! additional info Both VLC and Miro work on my system so there isn't a system wide problem with video and I haven't mentioned mono so no trolling it will get voted down.

  Read the article

• Ubuntu 12.04 still slow at mounting internal filesystem

  - by Matthew Goson

  I'm using Toshiba laptop with this configuration: - CPU: Core i5, 2.4GHz - RAM: 4GB - Graphics card: Intel - Hard disk: 500GB SATA I installed Ubuntu 12.04 64bit and got the same issue with this guy Very slow boot due to mounting filesytem, I tried all suggestions there but the slow boot issue still here. Here's a part of my dmesg: [ 2.041015] usbhid: USB HID core driver [ 2.101378] usb 1-1.6: new full-speed USB device number 5 using ehci_hcd [ 2.137980] atl1c 0000:04:00.0: version 1.0.1.0-NAPI [ 2.779080] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 22.822597] udevd[381]: starting version 175 [ 22.837954] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.850837] lp: driver loaded but no devices found [ 23.003822] Adding 7079096k swap on /dev/sda7. Priority:-1 extents:1 across:7079096k [ 23.407915] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 23.408153] mei 0000:00:16.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 23.408160] mei 0000:00:16.0: setting latency timer to 64 [ 23.408211] mei 0000:00:16.0: irq 44 for MSI/MSI-X [ 23.433196] [drm] Initialized drm 1.1.0 20060810 Additional information: my sda1 is a primary NTFS partition, sda2 is a primary ext4 partition which I installed Ubuntu onto. Other partitions are inside an extended partition.

  Read the article

• Old Fglrx Driver - AMD Radeon HD 3200 - ubuntu won't start

  - by Yohannes

  I've been using Ubuntu 12.04 64 bit for about 2 weeks now and I installed the latest Fglrx driver (Graphics Card- AMD HD 3200, PC- Acer Aspire 5336, 4GB RAM, 500GB Harddrive). The problem is that sometimes video's lag and play out of sync sometimes the windows take long to show up after I've clicked them etc. After looking around I found a video on Youtube by Ubuntu help guy and in the video he recommended using an older driver if you have an older graphics card, his was about 4 years old (same as mine) and he used the 11.10 catalyst driver so I decided to try it. I removed the previous installation of the driver and then installed the 11.10 driver. However, when I restarted it instead of going to the GUI it goes to a terminal like window and asks for my login. Now its pretty clear I need to remove the old driver and go back to using the latest one. The only problem is I'm not sure where I saved the latest driver and in order to connect to the Internet I need to change /etc/resolv.conf (I use a static IP). So what should I do? Also anyone from personal experience, what propitiatory driver works best with my graphics card? As in the version. Thanks

  Read the article

• Ubuntu 14.04 install fails with Via S3 UniChrome Pro graphics

  - by WizardNo.7

  I am trying to install Ubuntu 14.04 on a Fujitsu Siemens Amilo Pro laptop(it's quite old yes, has about 30GB Hard Drive and I think 192mb of RAM) which currently has Windows XP installed (which I'd like to keep for the time being). I have downloaded the 32-bit Desktop ISO and used unetbootin to create a Live USB for this laptop. When I boot from USB, I arrive at the unetbootin Grey and Blue menu and pick either "Try Ubuntu without installing", or "Install Ubuntu". The menu goes away and an Ubuntu loadscreen showing UBUNTU and four dots which progressively change between white and orange. At about the second color changing cycle a white underscore symbol appears next to the fourth dot and flickers. There is some leftover text from the kernel boot still visible, but there is no graphical desktop. After this I have to hard reboot or shut-down. $ lshw -c video *-display UNCLAIMED description: VGA compatible controller product: CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro] Vendor: VIA Technologies, Inc. physical id: 0 bus info: pci@0000:01:00.0 version: 01 width: 32 bits clock: 66MHz capabilities: pm agp agp-2.0 vga_controller bus_master cap_list configuration: latency=64 mingnt=2 resources: memory:f0000000-f3ffffff memory:d1000000-d1ffffff

  Read the article

• Essbase Analytics Link (EAL) - Performance of some operation of EAL could be improved by tuning of EAL Data Synchronization Server (DSS) parameters

  - by Ahmed Awan

  Generally, performance of some operation of EAL (Essbase Analytics Link) could be improved by tuning of EAL Data Synchronization Server (DSS) parameters. a. Expected that DSS machine will be 64-bit machine with 4-8 cores and 5-8 GB of RAM dedicated to DSS. b. To change DSS configuration - open EAL Configuration Tool on DSS machine.     ->Next:     and define: "Job Units" as <Number of Cores dedicated to DSS> * 1.5 "Max Memory Size" (if this is 64-bit machine) - ~1G for each Job Unit. If DSS machine is 32-bit - max memory size is 2600 MB. "Data Store Size" - depends on number of bridges and volume of HFM applications, but in most cases 50000 MB is enough. This volume should be available in defined "Data Store Dir" driver.   Continue with configuration and finish it. After that, DSS should be restarted to take new definitions.  

  Read the article

< Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >