Search Results

Search found 4572 results on 183 pages for 'dual monitors'.

Page 137/183 | < Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144  | Next Page >

• NATing with a single-homed machine possible?

  - by Harry

  I have the following setup: a) a single-homed machine, A, that can see the Internet. b) other machines B, C, and D that cannot see the Internet. c) A, B, C, and D can see each other. d) all machines are running either RHEL 5.3 or Fedora 16. Question: Is it possible to have B, C, and D share the Internet connection with A somehow? Note, again, that machine A does not have a second NIC installed. (The solutions that I am finding on the Net assume A to be a dual-homed system!) Also, could you please recommend a set of book(s) or online resources for a current and in-depth coverage of iptables for people with only a basic knowledge of TCP/IP?

  Read the article

• Setup local EC2 style cloud?

  - by John Kramlich

  I was recently given 3 dual opteron 2400 servers with 4GB of RAM and 120GB hard drives. I am interested in setting up something similar to Amazon's EC2 for my own personal web development use. Basically, I would like to spin up instances from an ISO or other disk images and have them available to test and develop software. Are there open source solutions I can use to accomplish this? I am assuming one of the machines will need to act as a controller of some sort for the other two. I use Sun's VirtualBox on my local development machine to virtualize various versions of Microsoft Windows. However, I'm not sure if that's the best tool for what I am trying to achieve. I apologize in advance if this question is to vague to get meaningful responses. I am new to cloud computing and fairly new at server administration.

  Read the article

• Is Zabbix the right tool for me?

  - by hortitude

  I just want to monitor a small handful of servers (less than 10). From reading various places it sounds like the top leading contenders (for open source at least) are: nagios munin zabbix From what I have read a lot of people tend to use munin and nagios together -- munin for history and graphs, and nagios for alerting. On the other hand it sounds like Zabbix is a more complete solution and easier to configure than either of the other two. So I was thinking of going that route. My thoughts right now are: What are the general disadvantages of Zabbix? Does Zabbix have a small footprint on boxes it is monitoring? Do I really need to setup an entire other server for it? I currently have a server that is under very light load -- can I dual purpose it?

  Read the article

• Streaming audio to headless linux box

  - by Ralph

  I have a dual boot (Win 7 + Ubuntu) PC connected via wifi with my music collection on a local HDD. I usually use Rhythmbox on Ubuntu or Winamp on Windows to listen to my music but I'll change if I have to. I also have a Raspberry Pi (low power PC running Debian) in the living room that is usually headless and connected via ethernet. The Raspberry Pi is also connected to my living room speakers via an amp. I would like to be able to stream music from my PC over the network to the linux raspberry pi. What software can I use to do this? Some sort of audio client\server?

  Read the article

• Sound card issues (High Definition Audio Controller)

  - by Prakash R

  I have a 5-year-old Acer Aspire 4520. Until a month back it was working beautifully on Windows 7 32bit. But then out of the blue, the sound stopped working. I've tried reinstalling the OS 3-4 times. The sound came back a couple of times, but it stopped working after a reboot. Even after installing the sound drivers, I don't see any entry in the Playback tab of the Sound applet in Control Panel. I see a High Definition Audio Controller entry in Device Manager. I disabled and uninstalled it, but Windows reinstalls it automatically. I'll share specific hardware details if anybody here needs to know. The processor is "AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55". Any help would be appreciated.

  Read the article

• Are there HP Infinihost III ex drivers for windows available?

  - by Matt

  I picked up some infiniband cards off ebay for development/testing purposes. I was hoping that there would be some drivers available under windows 7, but it doesn't seem to be recognised by the OFED software which would seem to contain windows drivers. They are however immediately picked up by Ubuntu and drivers are loaded. Are these cards supported under windows 7 at all? mstflint under linux reports: Image type: Failsafe FW Version: 4.8.930 I.S. Version: 1 Device ID: 25208 Chip Revision: A0 Description: Node Port1 Port2 Sys image GUIDs: 001a4bffff0c9374 001a4bffff0c9375 001a4bffff0c9376 001a4bffff0c9377 Board ID: (HP_0060000001) VSD: PSID: HP_0060000001 From what I can tell they are the following: HP IB 4X DDR PCI-e DUAL PORT HCA (HP part number 409376-B21)

  Read the article

• How to automatically take daily HDD backup?

  - by user13107

  I think my HDD might have crashed. I don't want to lose data if this happens again. I have dual boot Windows/Ubuntu system. What is the best way to backup data and other software settings in Ubuntu? I don't care much about Windows partition, important stuff is in Ubuntu. I have 1 Tb external HDD (laptop HDD is of 500 gb total). One way would be to run rsync every day (or via cronjob) to backup everything to external HDD. What might be better ways of achieving this (backup)? Also are instant backup software recommended? Are there any disadvantages of instant backup as opposed to daily rsync?

  Read the article

• MySQL returning slow queries with result sets bigger than 30 rows

  - by josephs8

  When ever I run a query that exceeds 30 queries the time for the query to run goes from less than a second to over 10 seconds to get data. Example I run a query to return 29 rows, it takes .1 seconds, I run a query to return 31 rows it takes 11.2 seconds. I am running mySQL on Windows 2008 Server Dual Core 2.6Ghz with 3GB of Memory. The machine doesn't run anything else. It does have a instance of MSSQL running on the server but that does not get used at all. This only happens via PHP right now, If I manually run the query on the server it returns it in less than a second. The queries are not complicated either I have included one below: SELECT Name, Value FROM `bis_co`.`departments` LIMIT 31 What would be causing this issue and how can I correct this? Am I missing a configuration setting in MySQL or something. Thanks

  Read the article

• Webcam on Sony Vaio on Win 7 problem

  - by Norm

  Anyone know where I can get a Win 7 32Bit driver for my Web Cam (Vaio VGN-CR11H/B) ? I changed operating system from Chinese Vista to English Win 7 Update: Windows 7 will not detect the cam, but I just read the Sony Europe site and it gives me some ideas to try. I can dual boot this Sony laptop: with Chinese Vista, the camera works but IE8 does not work. I cannot read Chinese to fix the Internet access issue, but I can get the computer online and Skype works. When I boot with the new Win 7, IE 8 works great, but the cam doesn't work (mic and speakers work). Very perplexing problem.

  Read the article

• Windows Server 2008 R2 Maximum Processor Limit Confusion

  - by Stevoni

  As I was looking through the Windows Server 2008 R2 specifications, I saw that the maximum supported processors is 64 sockets for Datacenter addition. This puts the maximum number or cores at 256 (if all sockets are quad cores), which I think it's just silly, but whatever. And now the questions: How does one set something like that up? (Obviously not for me, but humor me) Are there multiple dual socket motherboards running in a giant case with a ton of memory? How does the OS see all of the CPUs if they're on different boards? What would be a real world example of a need to have 64 sockets attached to one operating system vs 32 2 socket servers?

  Read the article

• Why do I get a GRUB error after deleting the Linux partition?

  - by nateify

  I had a dual-boot setup with Windows 7 and Windows Vista. I used Easus Partition Manager and shrank my Windows 7 partition. In the empty space, I installed Linux Mint. I decided I didn't want it anymore, I simply deleted the Linux Mint partition. Now when I boot, all I get is this: GRUB loading. error: no such partition grub rescue> I don't have my Windows 7 install disk because it was pre-installed.

  Read the article

• Why can't I install Ubuntu 10.04 on a system that already has Ubuntu 8.04?

  - by Android Eve

  Ubuntu 10.04 is beautiful. I love it. I am dying to install it on my PC, alongside the existing Ubuntu 8.04 (from which I write this message right now). But... it won't let me! When I reach the partitioning stage (manual!) Ubuntu 10.04 sees my two HDDs as one RAID volume. It doesn't see all the partitions I already have in place in /dev/sda and /dev/sdb. Even Windows 7 doesn't behave like this... (yes, I actually managed to install Windows 7 64-bit in dual-boot configuration with Ubuntu 8.04 on this same system). Note: GParted on Ubuntu 10.04 (live CD) sees the partition intended for Ubuntu 10.04 (/dev/sda4) perfectly, but is unable to format it. Any idea how to solve this problem?

  Read the article

• Boxee on Dell 32in TV causes headaches, how to troubleshoot?

  - by brown145

  I have revamped an old pc, installing 4GB ram and a 256MB video card so that I could run Boxee to a Dell W3200 series TV that came with my apartment. It is connected via VGA, resolution is 1360x768, 24bit color, 60Htz refresh rate. Unfortunately, every time I use it I end up with a headache after less that 30 min. I have had my eyes check recently, and am able to play xbox (connected via hdmi) on the same TV without problems. What are the potential causes? My system seems to well meet or exceed the min requirements for boxee, XP, AMD Atholon 64 X2 Dual Core, 4GB RAM. Could it be the VGA cable? What is the most cost effective way to trouble shoot?

  Read the article

• Justification of Amazon EC2 Performance

  - by Adroidist

  I have a .jar file that represents a server which receives over TCP an image in bytes (of size at most 500 kb) and writes it file. It then sobels this image and sends it over TCP socket to the client side. I ran it on my laptop and it was very fast. But when I put it on Amazon EC2 server m1.large instance, i found out it is very slow - around 10 times slower. It might be the inefficiency in the code algorithm but in fact my code is nothing but receive image (like any byte file) run the sobel algorithm and send. I have the following questions: 1- Is it normal performance of Amazon EC2 server- I have read the following links link1 and link2 2- Even if the code is not that efficient, the server is finally handling a very low load (just one client), does the "inefficient" code justify such performance? 3- My laptop is dual core only...Why would the amazon ec2 server have worse performance that my laptop? How is this explained? Excuse me for my ignorance.

  Read the article

• Reasons for Wi-Fi to be slower on Ubuntu compared to Windows?

  - by den-javamaniac

  I'm using 64-bit Ubuntu 12.04 and Windows 7 64 bit – dual boot on the same computer. Connecting to the same wireless network. And it turns out that on Windows I get a more stable and stronger signal than on Ubuntu. To my knowledge there's a router which serves as a gateway and then there's a cable connected to the router which goes further to ISP, so the results for both OS should be the same. I've tested the issue on both OSs at various times and it gave me the same result. The question is why? Why Ubuntu networking is worse than that of Windows?

  Read the article

• How to understand cpu family/model/stepping fields in /proc/cpuinfo [closed]

  - by Victor Sorokin

  I have following in cpuinfo: processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 107 model name : AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping : 2 According to Wikipedia page there are two kinds of 5600+ -- one of 90nm technology, another of 65nm. How can I understand which one I have? There seem to be no direct correspondence between contents of cpuinfo and info on Wikipedia page. AMD site seems to use some other naming scheme for processors too. How can I map values of family, model and stepping from cpuinfo to the data available on Wikipedia/AMD?

  Read the article

• Make GRUB 2 boot Windows 8 safe mode

  - by Tim

  I have a dual boot configuration: Windows 8 Consumer and Ubuntu 11.10. I tried to install the Asus drivers for my motherboard (P8Z68-V LE EFI) in windows 8, and i now get bluescreens when starting windows. Holding F8 or Shift-F8 doesn't seem to be working, so is there another way to get into Safe Mode, or uninstall the errant driver? I need to get into Safe Mode in windows to fix the issue. Things I have tried: Disabling overclock Holding F8 or Shift+F8 How can i get GRUB 2 to boot windows 8 in safe mode? Or is there another way to disable a driver that is making it impossible to boot?

  Read the article

• Install ubuntu on MacBook Pro

  - by n179911

  Hi, Can you please tell me what is the preferred way to install Ubuntu on MacBook Pro? I have a MacBook Pro with MacOSX 10.5. I need a Linux environment some times. So what is the best way to achieve that? 1. Make it dual boot? (but I don't know if that is possible with MacBook) 2. Install Virtual Box and then put Ununtu on top of it? (But I am not sure if this configuration will be slow, so I need a Linux environment for coding, so it needs to do compiling and debugging and stuff). Thank you for any tips.

  Read the article

• Can I ping via an arbitrary interface of a DD-WRT system? [migrated]

  - by bytebuster

  There's a Linksys WRT54GL router with DD-WRT firmware (v23SP2). The network has a simple dual-WAN configuration (standby mode, switching by a script): ~ # ip route 192.168.3.0/24 dev br0 proto kernel scope link src 192.168.3.1 192.168.2.0/24 dev vlan2 proto kernel scope link src 192.168.2.2 192.168.1.0/24 dev vlan1 proto kernel scope link src 192.168.1.67 127.0.0.0/8 dev lo scope link default via 192.168.2.1 dev vlan2 I'm trying to ping a certain server arbitrary via vlan1 or vlan2. What I tried, as suggested here: ping -I vlan2 <address> ping 192.168.2.1 <address> In both cases ping simply exits with no error messages. Also, ping ignores many other parameters, again, by exiting silently. I failed to find any references that DD-WRT has a limited version of ping whatsoever. I also don't think it can be a permissions issue as mentioned here since the only user with DD-WRT is root. What's wrong?

  Read the article

• Uncorrectable machine check

  - by GregC

  I am experiencing rare but real unrecoverable machine checks on HP DL370 G6 dual-core Xeon server. I ran memtest86+ before, and ran CPU-intensive operations without any problems. In your opinion, does this indicate a real problem, or is it normal and expected behavior? How would you approach this problem? EDIT after some troubleshooting, it seems that these machine checks, as well as problems when showing device manager can be traced back to NC375i NICs. All is well when the NICs are not in the server. Further improvements to stability of HP Gen6 with Intel Xeon have been brought in with BIOS update in September 2013 HP Update DVD. Intel's newer microcode makes these CPUs much more stable. We haven't seen hardware-related BSODs since the update in September.

  Read the article

• Headphones stopped working in Windows (working fine in other OS)

  - by arnab321

  All of a sudden, my headphones stopped working with windows 8 in my laptop. Sound plays fine through built in speakers. Its not a problem with the hardware, because, I dual boot ubuntu and sound plays fine in Ubuntu. These are the things I have tried: - Restarting and blah blah. Restarted 20 times i think, alternating windows and ubuntu. - Uninstalled and reinstalled Realtek drivers. - Troubleshooting from control panel (it says "coudnt identify problem") What might be the problem?

  Read the article

• Wireless performance on Ubuntu 9.10

  - by Brian

  Is there something I should do to my networking configuration in Ubuntu to better the performance of my wireless connection? I'm on a netbook dual-booting Windows 7 and Ubuntu 9.10. I pick up much stronger wifi signal when in Windows than Ubuntu. As soon as I boot Ubuntu, it will connect to the network with a stronger signal, and then loses signal very quickly. After it dies, I can't reconnect. I've tested this on a couple of different networks with the same outcome.

  Read the article

• Proxying/Tunneling IPSec traffic via netcat or SOCKS?

  - by MattC

  I have a client that is using a SonicWall router as their VPN concentrator. I downloaded the client software and set up the router as a peer. My issue is that my company uses a dual DMZ setup, meaning we have an interior firewall, then a bunch of DMZ servers, then an external firewall, then finally the telco router. In this setup, the interior firewall has no way to communicate with the exterior firewall since they are on two totally separate subnets. The communication occurs through the servers that straddle the networks. In this case, I need some way to forward the ISAKMP/IPSec traffic from my desktop out to the Internet. My usual trick of using netcat on the intermediate proxy server doesn't work here since it's not TCP/UDP traffic as far as I can tell. All of my previous experience with VPN's have been using SSL-based VPN's which are clearly very easily proxy-able. Any help would be appreciated, thanks!

  Read the article

• How can I tell if my live web-server is overloaded?

  - by Nick G

  We have a live webserver which doesn't seem to be performing all that well. It's a Dell PowerEdge machine, a few years old (dual core, 4GB) which is hosting about 20 low-traffic websites. However it doesn't seem to be as fast as it used to be. How can we determine the cause of this? If it's website traffic, I would be expecting high CPU but CPU usage is quite low and hovers around the 15-30% mark except for very brief periods. I'm wondering perhaps, if rather than CPU performance being a problem, perhaps it's disk thrashing due to the constant read/writes of all the small web files and database queries. It has 4x 7200 RPM SATA drives in RAID 5. So is there a way to check that it's not disk thrashing?

  Read the article

• Restoring Dell recovery disks while preserving Linux partition

  - by Flup

  I have a Dell laptop dual-booting to Windows 7 and Linux. I have through my own stupidity royally stuffed the Windows partition. I have the set of recovery DVDs that I created when I first got the laptop, and I've successfully booted from them in a VirtualBox VM and ended up with a fresh (albeit virtualised) installation of Windows 7. When I started the recovery process, there was mention of other partitions being preserved, but it was unclear as to whether non-NTFS partitions would survive the process. The question is: can I run the recovery procedure without risking my Linux partition?

  Read the article

< Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144  | Next Page >