Search Results

Search found 9122 results on 365 pages for 'sound card'.

Page 137/365 | < Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144  | Next Page >

• Music but no voices on headphones

  - by TheEmeritus

  I have a laptop with Windows 7 and I have headphones for a couple of months, and only recently they started to play only the music, while the voices are there, but just very faint. I tried to connect them to another computer (PC, windows XP) and they worked fine, which made me think the problem isn't with the headphones but with the laptop. I've searched online and found a few solutions, none of the seemed to work. Such as: plugging in and out my jack until you can hear better, checking the headphones on other computers. Other relevant info: The headphones come with a mic if I right click the sound icon - sound devices. Then I dont see any 'headphones', not even if I tell it to show disabled devices. All I see is a 'speakers' icon, yet it's there even if the headphones are disconnected, and is always active. So if anyone has any idea I'd appreciate it :) Thanks!

  Read the article

• mobile broadband recommendations for Lenovo T500

  - by Justin Grant

  I use a Lenovo T500 primarily in and around San Francisco, although I do some travel in the US on business and occasionally to Europe/Asia. I'm looking for a good mobile broadband option for my T500. I am admittedly baffled by the various mobile-broadband choices (3G vs. 4G, WiMax vs. LTE vs. MIMO vs. ..., etc.). My priorities are (in this order): Compatible with Lenovo T500 and Windows 7. I realize only the AT&T accessory card is listed on Lenovo's site, but I've also heard that other cards will work in my T500 too, like the WiMax/Wifi combo card-- so I'm interested in what actually works, not necessarily only what Lenovo is promoting. Reliable coverage in US large cities, especially the SF Bay Area. my IPhone has lousy coverage in many spots, so I'd be nervous about an AT&T 3G option unless the problem is with the IPhone and not AT&T's network. I'm OK with non-great coverage outside major US cities, since I don't do much travel in those areas. Speed. faster is better. Internal card. I'd slightly prefer something I could install inside my T500 instead of a dongle on the side that might break off, although this is my lowest priority so it's not a big deal. Price. I don't want to pay over $100/month. I've tried lots of Googling and haven't come up with clear answers. I've seen lots of general overviews without recommendations, and lots of passionate opinions which don't feel objective (and don't help me understand compatibility with my hardware & geography). Can you recommend a good, objective guide online, ideally for Lenovo although general guide is OK too, which can help me figure out which option is the best one for me? I'd also be interested in your own personal experiences of using mobile broadband using a Lenovo T500. I'll accept the answer which gets me closest to making a decision.

  Read the article

• Are these components compatible and are there any significant bottlenecks?

  - by Tom Gullen

  I'm trying to buy a new pc, for software dev and a bit of gaming. I already have a 500gb HDD , and a PCI sound card I want to use as well. Is all this stuff compatible, and will it all work together and are there any significant bottlenecks? Case, Mobo and PSU "Primo Motion" AMD 880G DDR3 Ready Barebones (Socket AM3) http://www.overclockers.co.uk/showproduct.php?prodid=FS-268-OK&groupid=43&catid=1817&subcat= SSD 64GB Crucial RealSSD C300 64GB 2.5" SATA 6Gb/s Solid State Hard Drive http://www.overclockers.co.uk/showproduct.php?prodid=HD-007-CR&groupid=1657&catid=1660&subcat=1668 CPU AMD Phenom II X6 Six Core 1090T Black Edition 3.20GHz (Socket AM3) http://www.overclockers.co.uk/showproduct.php?prodid=CP-266-AM&groupid=701&catid=6&subcat=1944 RAM 8GB Corsair Vengeance 8GB (2x4GB) DDR3 PC3-15000C9 1866MHz Dual Channel Kit http://www.overclockers.co.uk/showproduct.php?prodid=MY-292-CS&groupid=701&catid=8&subcat=1387 Graphics XFX ATI Radeon HD 5770 1024MB GDDR5 PCI-Express Graphics Card http://www.overclockers.co.uk/showproduct.php?prodid=GX-149-XF

  Read the article

• How do I keep second monitor (HDTV) from auto-disabling in XP when it is turned off?

  - by ThantiK

  I have a new 32" TV that I hooked up to the HDMI port on the back of my video card to use as a second monitor. I used an HDMI/DVI cable to hook it to the TV, and whenever I turn my TV off, XP disables the device tied to the TV so each time I want to use the TV as the monitor, I have to go into my display properties and enable it; it gets pretty annoying. How do I turn this 'feature' off? -- I have an NVidia card should it be specific to the nvidia control panel.

  Read the article

• after upgrade to outlook 2013 Contacts have the default picture in reading pane

  - by Juan Zamudio

  I'm using Windows 8 on a domain (using a domain account not a Microsoft account) connecting to Exchange, all my Contacts were outlook contacts with pictures and other data, I could see the picture of the contact in the reading pane and people pane while using Outlook 2010. After the upgrade to Outlook 2013 I can see my outlook contacts but it appears that they are unavailable in the reading pane because all i can see is the default picture (the default picture picture is also visible in the notifications). If I put the mouse over the name of the people while in the reading pane all I can see is the card with the default info (the only data is that the contact is available in the next 8 hours), if i compose a new message and hover the name of the contact i can see the card with all the data (picture, company, etc.). Is this the default behavior in Outlook 2013 if you are in a domain and not connected to any service or there is a way to show the picture of my contacts in every part of outlook?

  Read the article

• Stuck in power saving mode

  - by sazabi02

  I've got an LG monitor I tried attaching to my laptop for dual monitor goodness and it worked fine but when I tried attaching it back to the desktop it stuck in "Power Saving mode" and wouldn't go away. The CPU's starting up but nothing happens with the monitor. I try attaching it back to the laptop and it works fine again. I don't understand what could have happened. For reference, the laptop I'm using is an HP laptop with nVidia GT240M video card running on an i7 processor while the desktop runs on a Dual Core processor with an nVidia 9400GT video card. I've never had problems like these with other monitors I've attached my pc to. Anyone got any ideas?

  Read the article

• How do you test if a PCI slot is working - motherboard diagnostic software?

  - by Adam

  I suspect that my motherboard is bad, and that my PCI-E slot is not working. I have a Gigabyte motherboard that had a Hauppage 2250 working fine in the PCI-E slot for many months. However - recently - would not get TV channels that I used to get --- until finally Media center cant detect any channels at all. Got a new tuner card (ATI 350 card) - cant detect any channels. The cable signal is good - I have it connected directly to a TV - all channels come in clear. SO that is why I suspect a motherboard problem. Are there any motherboard diagnostic scanner utilities that can verify I need a new motherboard

  Read the article

• Discover MAC address

  - by Kami

  I've to setup a bunch of server ! I need to discover their mac address with the following situation : MacBookPro >----------< Server I'm directly connected (not behind a router/switch) to the server. I've no clues about the ip address the server is using as default setup. I can't use a display connected to the server displaying its newtwork card config. How can I discover the MAC address of the server network card ? I'm looking for a command line tool. If something exists in MacPort it's also ok !

  Read the article

• How to Connect Firewire Camcorder to Laptop without firewire port

  - by bdk

  I Have a Sony Camcorder w/ a 4-pin firewire output. I have HP laptop I want to use it with, but the laptop, does not have a firewire port, just VGA, HDMI, USB, ESATA, Ethernet, and Modem. In addition, It doesn't have a PC Card slot for adding a Firewire card. Googling for "Firewire to USB adapter" returns a lot of hits, but no product that seems to do what I want. I assume I need a USB dongle that gives a firewire port and has drivers so that the PC sees it as a regular firewire port. Thanks for any recommendations

  Read the article

• Laptop hot after format

  - by Dany Khalife

  I recently formatted an HP G62 Laptop and installed all drivers from the HP site that should be installed for this model. But i noticed a very strange behavior, using Coretemp, the temp is always above 50 (on idle) and reaches 70 very quickly sometimes (Critical is 90) If i open youtube or skype alone, i can get temperatures as high as 83. Normally it was around 32 (on idle) and reaches 70 when i open games but not youtube.... I have a i3 processor and AMD graphics so i am wondering if somehow it's a graphics card issue (since i3 has integrated graphics as far as i know) Device manager shows only AMD graphics card tho, not sure if i3 graphics should appear here too. Any ideas what i might have forgotten to do after the format ?

  Read the article

• Windows 7 does not recognize hdmi audio output

  - by user30038

  I recently upgraded to Windows 7 on a Dell 545 MT with audio/video output via nVidia 9800 GTX+ to a flat screen television. I have installed/uninstalled/reinstalled all the most recent drivers from nVidia & realtek, but the machine will not recognize the hdmi output as a sound device (as it did previously in Vista). I troubleshot the problem with Dell for over an hour and was then directed to their software specialists who want $130 to fix the issue! Can anyone offer some insights on this? I've searched nVidia and Windows 7 forums w/o success and would really like to get sound coming back through my tv speakers. Many Thanks.

  Read the article

• WinXP keyboard input repeat rate problem

  - by Victor Sorokin

  I have problem similar to http://superuser.com/questions/33981/problems-with-kvm-switch-and-keyboard-repeat-rate-on-windows-xp: When I press and hold some key it's repeated random number of times, after that repeat stops and I need to release key and press it again to make repeat continue. If there's simultaneous sound playback and repeat is stopped, sound's stuck while I hold key with unpleasant drumming as if there's some audio problem. This issue is reproducible in WinXP Safe Mode. On the same config under Linux there's no issue. My config: List item PS/2 Logitech Keyboard USB Mouse MB M3A/H-HDMI WinXP Pro English SP2 with added Russian layout (WinXP loads via GRUB2) Realtek audio drivers for AC97 Thanks for your suggestions J

  Read the article

• snow leopard: how can i monitor loading of specific extensions?

  - by ufk

  Hiya. I'm installing VoodooHDA extension in order for Intel 82801I (ICH9 Family) HD Audio 8086:293E sound card to operate. The sound card does not work but i have no idea how to debug the issue. How can I check if the module was loaded properly? how can i make sure that there where no conflicts? how can i make sure that there were no dependencies issues with another module? Using snow leopard 64 bit. thanks!

  Read the article

• Can I set up a 2nd home wireless router, with router2 connecting to the internet through a desktop which is wirelessly connected to router1?

  - by gil b.

  Hi, I apologize for the crudeness of my MSPaint drawing, but please view my diagram of what I'd like to accomplish: Proposed home network architecture Currently, all devices are connected to 1 wireless router. I would like to make my own subnet, with a box in-between my subnet and the shared wireless router, so that I can learn about IDS, traffic analysis, etc. I was also given a cisco PIX firewall to play around with, and it'd be an added bonus if I could incorporate that into my network. The reason for this proposed architecture is so that I can monitor all MY traffic, without seeing anything going on with my roommates' traffic. my MAIN Question is, is it possible to have my desktop connect to the wireless router with internet via wireless card AND share that connection via the ethernet card, hooked to wireless router 2? cable modem - wireless router - desktop pc connected wirelessly - wireless router 2 getting internet from wired connection to desktop pc - laptops connected wirelessly The PIX can be left out for now, but I'm wondering if it could eventually be incorporated? THANKS!

  Read the article

• CPU fan twitching phase leds blinking - computer won't boot

  - by SooX

  I have a big problem that I got today. Yesterday computer was "on" normally, I went to sleep without shutting it down. When I woke up, I heard a strange sound and was unable to bring it up from hibernate. I unplugged the PSU. When I plugged the PSU back in, the sound came back. When I opened the case, I saw the fan "twitching" like it is about to start and fan LEDs were blinking. Also, motherboard LEDs were blinking in the same pattern - the first green one has more of luminosity then others. When I cut down the power with 0/1 button on PSU, the fans continue to make sounds like the machine is trying to boot before the capacitors run out and the power dies. Does anyone have a clue what to do? I tried disassembling everything but that doesn't work. I will try with friend's PSU later today.

  Read the article

• Laptop recommendation for home user

  - by Mehper C. Palavuzlar

  I'm going to buy a new laptop soon and I need Super Users' recommendations. The following criteria are crucial for me: Intel i series processor Min. 4 GB RAM Min. 500 GB HDD HDMI port Min. 3 USB ports Not a monster, but a good graphics card Multimedia card reader DVD-RW Double Layer No heating problems! What do you recommend me? I'm considering buying a Vaio but I'm not sure. TIA.

  Read the article

• Why cant I get 3 monitors working with my ati 5770

  - by G-Dogg

  I have an ati 5770, card with vga, dvi and hdmi output. I can only get 2 out of the 3 monitors working at once, however i can change the configuation so that all monitors can be selected, but only 2 will work at once.. 2 of my monitors have dvi inputs and one has vga. in my catyalist control center it shows all 3 monitors are there but either 2 can be selected at a time, and so the same with my windows 7. I have and adapter which i use on the 3rd monitor, hdmi-dvi adaptor and it works. also when i boot up my pc i get 2 monitors booting up and when windows starts the 3rd monitor boots but the 1st one closes. I looked at my package box and it actualy does specify ati eyefinity technology is available with this card. why wont it work???

  Read the article

• Using multiple wifi connections simultaneously on Windows

  - by Salman A

  My office PC has a one wireless network card and there are three available wifi connections: primary, backup and backup of a backup (grin). Is it possible for me to use all three simultaneously. If this results in an increase in bandwidth that's well and good, but primary reason is every now and then one of the network fails and i have to switch back and forth between the available networks by disconnecting, viewing available networks and connecting to next one hoping its running. Do i need more than one network card or a software e.g. a proxy.

  Read the article

• Using multiple wifi connections simultaneously on Windows

  - by Salman A

  My office PC has a one wireless network card and there are three available wifi connections: primary, backup and backup of a backup (grin). Is it possible for me to use all three simultaneously. If this results in an increase in bandwidth that's well and good, but primary reason is every now and then one of the network fails and i have to switch back and forth between the available networks by disconnecting, viewing available networks and connecting to next one hoping its running. Do i need more than one network card or a software e.g. a proxy.

  Read the article

• Bridge virtual machines out WLAN interface

  - by Thomas

  It seems that my wlan card (intel 5100 AGN) firmware doesn't allow "spoofing" MAC addresses. This has the side effect of destroying the capability to bridge out my virtual machines on that interface. Apparently this is a common thing on wlan cards. I can see the incoming traffic just fine in my virtual machines, but their DHCP queries don't get bridged out of the WLAN card. It works perfectly well when using the wired ethernet port. Is there a workaround for this? MAC-NAT or something? I don't want to route my virtual machines out to the Internet because I don't want my host OS to even have an IP address. I'm using Linux and KVM for virtualization.

  Read the article

• How to reset video/display drivers in Vista without restarting OS?

  - by jdk

  Currently I have to reboot my system if an external monitor is hooked up for it to be correctly detected and used. I think it would be faster to restart/reset the video or display drivers instead. How do I do this under Vista? I seem to remember from an old laptop using a Windows command-line command that would restart the wireless networking card device when it crashed. Is there something like that for video drivers? Background/Reason Because people rightfully ask why? - This is part of a larger problem which I'm waiting for resolution on from the manufacturer. In the meantime I'm looking for the above quick fix. Actually my video card often crashes my laptop when attaching an external monitor and trying to detect or use it. No solution from vendor yet and latest drivers do the same irksome behaviour. Windows says: A problem with your video hardware caused Windows to stop working correctly.

  Read the article

• How to reset video/display drivers in Vista without restarting OS?

  - by jdk

  Currently I have to reboot my system if an external monitor is hooked up for it to be correctly detected and used. I think it would be faster to restart/reset the video or display drivers instead. How do I do this under Vista? I seem to remember from an old laptop using a Windows command-line command that would restart the wireless networking card device when it crashed. Is there something like that for video drivers? Background/Reason Because people rightfully ask why? - This is part of a larger problem which I'm waiting for resolution on from the manufacturer. In the meantime I'm looking for the above quick fix. Actually my video card often crashes my laptop when attaching an external monitor and trying to detect or use it. No solution from vendor yet and latest drivers do the same irksome behaviour. Windows says: A problem with your video hardware caused Windows to stop working correctly.

  Read the article

• Autodetect/mount SDCards and run script for them on Linux

  - by Brendan

  Hey Everyone, I'm currently running SME Server, and need to have a script run upon the attachment of SD Cards to my server. The script itself works fine (it copies the contents of the cards), but the automounting and execution of the script is where I'm having issues. The I have a USB hub consisting of 10 USB ports; that shows up as: [root@server ~]# lsusb Bus 004 Device 002: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 055: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 051: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 050: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 001: ID 0000:0000 (The hub is the TERMINUS TECHNOLOGY INC entries) As I cannot plug SD Cards directly into the server; I use a USB to SD card attachement (10 of them) plugged into the hub to read the cards. Upon pluggig the 10 attachments (without cards) into the hub; lsusb yields the following: [root@server ~]# lsusb Bus 004 Device 002: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 073: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 072: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 071: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 070: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 069: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 068: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 067: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 066: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 065: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 064: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 055: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 051: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 050: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 001: ID 0000:0000 As you can see, the readers are the "Gensys Logic, Inc" entries. Plugging in an SD card to a reader doesn't affect lsusb (it reads exactly as above), however my system recognises the cards fine; as indicated by dmesg: Attached scsi generic sg11 at scsi54, channel 0, id 0, lun 0, type 0 USB Mass Storage device found at 73 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 If I manually mount sdd1 (mount /dev/sdd1 /somedirectory/) this works fine. What I'm really after is a solution that automounts each of the cards as they are inputted into the reader; and executes a script for them (this will involve copying their contents to another directory). My problem is that I don't know how to do this; I don't think udev will work as the USB devices don't change; if I could somehow get udev working with /dev/disk/by-path/ however I think this is doable (it seems to keep constant entries). ls /dev/disk returns: pci-0000:00:1d.7-usb-0:4.1.1.1:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0-part1 pci-0000:0b:01.0-scsi-0:0:1:0 pci-0000:0b:01.0-scsi-0:0:1:0-part1 pci-0000:0b:01.0-scsi-0:0:1:0-part2 From above, we can see I have only one card plugged into the reader (pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0-part1). Going mount /dev/disk/by-path/pci-0000\:00\:1d.7-usb-0\:4.4\:1.0-scsi-0\:0\:0\:0-part1 Works and places the card under /media/usbdisk/, however: mount /dev/disk/by-path/pci-0000\:00\:1d.7-usb-0\:4.4\:1.0-scsi-0\:0\:0\:0-part1 slot1/ doesn't work, and returns "mount: can't get address for /dev/disk/by-path/pci-0000" Any ideas and solutions would be great, I've seen the knowledge of a lot of the guys on here before so I'm hopeful someone can help me out. Thanks

  Read the article

• OpenGL support no longer available

  - by Aznfin

  I've been using OpenGL hardware acceleration in programs such as Adobe Photoshop CS4 and Adobe After Effects CS4. I've noticed that recently the options for OpenGL previews are disabled because my graphics card seems to not support OpenGL. But that doesn't make any sense whatsoever. I know for a fact that my graphics card does have support for OpenGL and it worked before. I checked for driver updates just the other day. Anybody know what's going on? Info: Operating System: Windows 7 Home Premium 64-bit GPU: ATI Radeon HD 3200 Driver Packaging Version: 8.69-091211a-094296C-ATI Catalyst™ Version: 09.12 Provider: ATI Technologies Inc. 2D Driver Version: 8.01.01.994 2D Driver File Path: /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/CLASS /{4D36E968-E325-11CE-BFC1-08002BE10318}/0000 Direct3D Version: 8.14.10.0723 OpenGL Version: 6.14.10.9252 Catalyst™ Control Center Version: 2009.1211.1547.28237

  Read the article

• How to forward UDP and TCP traffic from one IP to another

  - by Rishabh Agnihotri

  Well i have a server with two LAN Card Installed.I have a server in U.S and one in India.I have created a GRE tunnel to route all traffic from U.S Server to my Indian Server.My Traffic has UDP,TCP,HTTP,etc Traffic.Now i have two LAN Card on my Indian Server.Well i have configured two IPs on the system for some of my needs on the system.One is a /30 and another is a /24.Well now i want the /30 IP to talk to my /24 IP.Lets take a e.g the IPs are 180.151.130.34 - /30 and 103.243.19.254 -/24 I want to forward all the TCP,UDP,HTTP,etc like traffic coming to 180.151.130.34 to 103.243.19.254.In the sense i want to make them talk to each other in a way if a TCP/UDP Packet comes to 180.151.130.34 it should be forwarded to 103.243.19.254 and then that packet is sent back by 103.243.19.254 to 180.151.130.34.I am not able to configure this part.Can anyone tell me step by step how to do so? Well i forgot to specify i am using Windows Server 2008. Any help would be greatly appreciated.Thanks in advance.

  Read the article

< Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144  | Next Page >