Search Results

Search found 4241 results on 170 pages for 'dual nic'.

Page 138/170 | < Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >

• Installing Ubuntu 12.04 on a single GPT SSD which contains Windows 7

  - by Gary

  I recently bought a brand new 64 bit PC with a (ASUS) motherboard that supports UEFI and a GPT formatted 240Gb SSD, which contains Windows 7 in the first of 3 (80Gb) partitions. When the system arrived, it booted into Windows 7 like a dream, with no problems. I did not originally want Windows, but the manufacturer does not work with Linux (of any flavour), so I thought I would install Ubuntu into the second partition and dual boot. I downloaded the 12.04 64bit version and proceeded to install. Having selected to 'install', the screen became corrupted, with multicoloured garbage across the middle third of the screen !! So, I rebooted and --- MISSING OPERATING SYSTEM !!! The only way I can now get into Windows is via Super Grub2. First question - what went wrong ? 2nd - Will Ubuntu install on a GPT disk partition ? 3rd - Will it install alongside Windows 7 without screwing the boot mechanism ? 4th - How do I do it ? I have scoured the internet looking for appropriate answers and found NONE ! Please help.......

  Read the article

• Cannot establish Wired connection on Acer Aspire 5930G

  - by drakos46

  I use an Acer Aspire 5930G, dual booted with Windows 7 and Ubuntu 13.10. My problem is that i cannot establish wired connection on my ubuntu. Wireless connection works in both of my OSs but the Wired connection does not, only on the Ubuntu. I have already tried the common fix: echo on | sudo tee /sys/class/net/eth0/device/power/control but without any results. Any ideas? eth0 Link encap:Ethernet HWaddr 00:1d:72:c2:21:a5 inet6 addr: fe80::21d:72ff:fec2:21a5/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:945 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:204318 (204.3 KB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:7241 errors:0 dropped:0 overruns:0 frame:0 TX packets:7241 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:645874 (645.8 KB) TX bytes:645874 (645.8 KB) wlan0 Link encap:Ethernet HWaddr 00:16:ea:57:7b:cc inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::216:eaff:fe57:7bcc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:19937 errors:0 dropped:0 overruns:0 frame:0 TX packets:16933 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10877245 (10.8 MB) TX bytes:3131378 (3.1 MB) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8071 PCI-E Gigabit Ethernet Controller (rev 16)

  Read the article

• What .NET objects should I use to create a cookie based session in MVC?

  - by makerofthings7

  I'm writing a custom password reset application that uses a validation technique that doesn't fit cleanly with ASP.NET Membership Provider's challenge questions. Namely I need to invoke a workflow and collect information from the end user (backup phone number, email address) after the user logs in using a custom form. The only way I know to create a cookie-based session (without too much "innovation" on my part) is to use WIF. What other standard objects can I use with ASP.NET MVC to create an authenticated session that works with non-windows user stores? Ideally I can store "role" or claim information in the session object such as "admin", "departmentXadmin", "normalUser", or "restrictedUser" The workflow would look like this: User logs in with username and password If the username and pw are correct a (stateless) cookie based session is created The user gets redirected to a HTML form that allows them to enter their backup phone number (for SMS dual factor), or validate it if already set. The user can then change their password using the form provided The "forgot password" would look like this User requests OTP code to be sent to the phone User logs in using username and OTP If the OTP is valid and not expired then create a cookie based session and redirect to a form that allows password reset Show password reset form, and process results.

  Read the article

• Technology Choice for a Client Application [on hold]

  - by AK_

  Not sure this is the right place to ask... I'm involved in the development of a new system, and now we are passing the demos stage. We need to build a proper client application. The platform we care most about is Windows, for now at least, but we would love to support other platforms, as long as it's free :-). Or at least very cheap. We anticipate two kinds of users: Occasional, coming mostly from the web. Professional, who would probably require more features, and better performance, and probably would prefer to see a native client. Our server exposes two APIs: A SOAP API, WCF behind the scenes, that supports 100% of the functionality. A small and very fast UDP + Binary API, that duplicates some of the functionality and is intended for the sake of performance for certain real-time scenarios. Our team is mostly proficient in .Net, C#, C++ development, and rather familiar with Web development (HTML, JavaScript). We are probably intending to develop two clients (for both user profiles), a web app, and a native app. Architecturally, we would like to have as many common components as possible. We would like to have several layers: Communication, Client Model, Client Logic, shared by both of the clients. We would also like to be able to add features to both clients when only the actual UI is a dual cost, and the rest is shared. We are looking at several technologies: WPF + Silverlight, Pure HTML, Flash / Flex (AIR?), Java (JavaFx?), and we are considering poking at WinRT(or whatever the proper name is). The question is which technology would you recommend and why? And which advantages or disadvantages will it have regarding our requirements?

  Read the article

• Setting up Cluster Configuration using an existing web server as a Primary Node?

  - by RapidWebs

  Thanks in advance for any help which is issued! I am having a slight issue, and need help with the decision making process when it comes to setting up my Cluster Configuration, consisting on a line of Ubuntu Servers (12.04). We currently have a Primary node, which resides in the US within a Datacenter, but we are going to be using this for all serious bandwidth and resource intensive websites, and through a configuration of Virtualmin + Webmin, will be setup as a sort of pseudo-cluster, using Virtualmins Cluster Modules. Anyways, on to the issue: We also have a business line setup locally, with three servers. here are their specs: Intel P4 2.4 ghz, 1GB Ram, 110 gb sata, Ubuntu 12.04* AMD 1.3 ghz, 512MB Ram, 20 GB IDE P3 Xeon 800mhz (dual physical processors), 1GB Ram, 3 * 25 GB Raid Configuration (one in use for host operating system). The first machine is currently IN USE and is serving virtual hosts off a sub-domain. My question is this: How can I integrate the Secondary node (which will be the Primary node per say, in this smaller configuration...) which is currently in use, into the cluster configuration w/ the other two servers for: Sharing Resources Redundancy (HA?) NFS /w the two Raid Disks without having the FORMAT the secondary node, and start fresh moving all my services in to a DRBD network drive or something similar, and than restoring all active virtualmin's Virtual hosts. the idea is that I want minimal downtime to people currently being served from server2.mywebsite.com, and from what I understand, all services need to be on a NFS so that they can be mounted on demand and accessed from the other machine taking over (i.e. Heartbeat + DRBD Config.) but my issue is that i already have all these services installed to their default directory structure: how can i most easily setup this NFS and HA system, move all my desires services to this new drive, and do it with minimal down time, and without breaking Virtualmin and everything else on my server? even just some pointers, a thread i could read, or a step by step check list or run down of commands i could issue to get started would be great! thanks!

  Read the article

• Can't install Ubuntu, black screen after install

  - by Tyrone

  I tried several times, but wasn't able to make it work. I tried all recent types of Ubuntu but it didn't work. Then I tried acpi=off at the beginning of the installation. In this way I could finish the installation. But after the restart Ubuntu didn't work. Only a black screen appeared. Before that I tried it on the VirtualBox and it work. By the way my system is the following: (I use windows 7 currently) Processor AMD Athlon II P320 (2,1 GHz, second-level cache 2 ? 512 KB, HT 1600 MHz bus) Chipset AMD M880G + SB850 Memory Dual Channel, 3 GB DDR3-1066 Wide Screen 15.6 “high-definition (1366 ? 768) c LED-backlit, AU Optronics B156XW02 Video Card AMD Radeon HD 4250, from 336 MB video buffer in memory, support for DirectX 10.1 and UVD Sound system: HDA-codec IDT 92HD81B1X AMD HDMI Audio Hard drive WDC WD3200BEVT-75A23T0 (298 GB, 5400 RPM, SATA 2.0) Optical Drive: DVD ± RW Optiarc AD-7585H Communication tools Fast Ethernet (10/100 Mbit / c) Realtek RTL8102E/RTL8103E WiFi 802.11a/b/g Broadcom BCM4310 Bluetooth 2.1 + EDR Card reader Memory Card Reader 7-in-1 with support for SD / SDHC / MMC / MS / xD, and derivatives Interfaces / ports 3 USB 2.0 1 eSATA + USB 2.0 15-pin video connector VGA HDMI RJ-45 Ethernet 10/100 Mbit / c 2 analog mini-jack: a microphone / headphone jack for a Kensington lock slot AC adapter Battery Li-Ion 6-cell capacity of 4400 mA ? h (10,8, 48 W ? hr) AC power adapter 65 Watt Additional equipment integrated web-camera (1.3 mega pixels)

  Read the article

• Difficulty Mounting Volumes on a Partitioned External HD

  - by Todd

  I'm having a great deal of difficulty with an external hard drive. I'm currently running a dual boot system (XP Service Pack 3 and Ubuntu 11.04 Natty Narwahl) on a Dell Inspiron B120. I'm trying to set up a new 80 GB Hitachi external HD. Using GParted, I formatted the drive and set up the partitions. The partitioning scheme is as follows 10GB NTFS Primary, 2GB Linux-Swap Primary, 50GB FAT32 Primary, 12GB Unallocated. After applying those changes, I went into Disk Utility and the HD appears along with the correct partitions. When I try to mount the volumes for partitions 1 and 3, I get a pop-up stating: Error Mounting Volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. When I try to to check the filesystem I get a pop-up stating: Error Checking filesystem on volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. Throughout the time that I'm attempting to troubleshoot the problem, the external drive light is on and blinking. With my frustration hitting a boiling point, I try to shut down the drive and remove it so that I can plug in a different external HD that works PERFECTLY. However, when I try to shut down and safely remove the drive, I get a pop-up stating: Error Detaching Drive An error occurred while performing an operation on "80GB Hard Disk" (HTS548080m9AT00): The daemon is being inhibited. Can anyone tell me what I'm doing wrong? I'm a newbie and not that skilled with terminal commands, so please dumb it down for me if you request specific command output.

  Read the article

• No boot or grub file after using ls command

  - by Poke Moke

  I had xubuntu installed, i believe version 12.04 and then tried to dual boot with backbox. It worked from the flash drive but upon installing it onto the hard drive, I could no longer boot backbox. I decided I would just clear my OS and put just backbox on the hard drive and only have a single boot. To do this, I erased my boot file completely which led to my current position. I am put into the grub rescue prompt. I can't do a system restore, I can't boot with anything I might try including puppy linux and a boot rescue, and I've looked up the commands and I've tried to fix this. I can do ls, I find the correct hd but then I'm stuck as I don't have a boot or grub folder. The command is typed as: ls (hd1,msdos1)/ and listed is ./ ../ lost+found/ etc/ media/ bin/ dev/ home/ lib/ mnt/ opt/ proc/ root/ run/ sbin/ selinux/ srv/ sys/ tmp/ usr/ var/ initrd.img vmlinuz cdrom/ apfolder initrd.img.old vmlinuz.old (not sure if it's initrd or init rd.img. as it wraps around the screen there.) I've seen commands regarding boot or grub if they are seen but as listed, they aren't there. Any ideas?

  Read the article

• Unable to mount NTFS Partition after resizing

  - by sam

  I was having only 15 GB space allocated to LINUX. I wanted to have more space available to linux. So I just re sized one of my ntfs partition using GParted. But after resizing I am not able to open the partition neither in Ubuntu nor in windows. OS: Dual Boot Win7/Ubuntu 10.10 The error message i get is the following: Error mounting: mount exited with exit code 12: Failed to read last sector (395458824): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sda5': Invalid argument The device '/dev/sda5' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?

  Read the article

• IPv6 tunnels - any easy way to turn them on and off?

  - by Rob Hoare

  I've set up a tunnelbroker.net (Hurricane Electric) IPv6 tunnel from my laptop running 12.04. Works fine, and allows me to test the dual-stack configuration on my remote webservers etc. until native IPv6 is available on my ISP. However, there are times when I don't want the tunnel. For example if I'm accessing something that requires an IPv4 address in my own country rather than the Tunnelbroker tunnel endpoint, or if I'm away from the local IPv4 tunnel endpoint, or if I simply want to test without IPv6. Is there a simple way to disable and then re-enable the IPv6 tunnel, without rebooting? For context, here's what's in my /etc/network/interfaces (NNN replaces numbers): auto he-ipv6 iface he-ipv6 inet6 v4tunnel endpoint 216.218.NNN.NNN address 2001:470:NNN:NNN::2 netmask 64 up ip -6 route add default dev he-ipv6 down ip -6 route del default dev he-ipv6 Is there a network manager application (gui or command line) to selectively enable/disable parts of /etc/network/interfaces, or IPv6 in general? I found even by commenting out that out (and reloading networking) it's tough to get the IPv6 to go away. A "tunnel on/off" button in networking would be great, like using a VPN.

  Read the article

• Further question on Intel graphics driver

  - by Thomas Byers

  Ok, Josh answered almost immed.! I need to know specifically, now that I am using Nvidia card effectively, do I need to allow update manager to update the intel gr. drivers? I must add, I believe I know why Update Manager is telling me I need to update those Intel gr. drivers. It probably happened because I tried to update my nvidia drivers and got a buggy install, which let to to a black screen. I shut the system down manually after that and rebooted to a black screen and upon a further reboot I ascertained that I could still dual-boot(windows 7) into the other os. Then I went through the restart process and at the grub2 menu chose other options and it was probably, at that time, that Linux was smart enough to know that nvidia drivers as installed weren't cutting it, and reverted to the onboard Intel graphics system...does that make sense? Anyway, after successfully getting up and running, I reinstalled my old but successful nvidia drivers and all was well again, except now upon running Update Manager, I am offered the Intel graphics driver upgrade each time, which, up til now I have unchecked...my question is now more obvious. Should I accept the Intel driver update and if I do, will it once again override my nvidia drivers?

  Read the article

• Impossible to enable bluetooth under Ubuntu

  - by PCh

  I just installed Ubuntu 12.04 (dual boot, kept Windows just in case) on my new Acer Aspire One 756-877. As soon as I installed it I also installed the Broadcom driver, since wifi wasn't working, and that solved it right away. But when I tried Bluetooth, I had a problem that I see is quite recurring: -The hardware is on (and working fine under Windows) -The icon shows up on the menu, giving me the options of turning Bluetooth on or off, and then just "Bluetooth preferences". -I can apparently turn it on that way, which only lights up the icon but makes no difference at all (and doesn't give any other options in the Bluetooth menu) -When I open "Bluetooth preferences" (whether Bluetooth is apparently on or off, it makes no difference), it says it's disabled and will not let me slide the button to enable it. I've rebooted, but nothing happens. -The material is Broadcom and the port (if it's relevant at all) is Port_#0001.Hub_#0003 I tried the following commands suggested in other similar questions, with no result at all: sudo dmesg | grep blue and sudo service bluetooth start and sudo /etc/init.d/bluetooth start Any other clues on what I can do? Thanks for your time!

  Read the article

• Unable to install ubuntu on a AMD 64 bit system with a AMD Radeon HD 6670 graphics card

  - by Tom Wingrove

  I’ve been running a dual boot system (Ubuntu/Windows7) for two years or so with no problems. I recently built an AMD 64 Bit System, re-installed Windows but when I went to load Ubuntu inside Windows, hit a snag. The screen view during installation became small square blocks of colour, which obviously is a graphics drive problem. I tried various live disks both 32 & 64 bit for, Ubuntu 12.04, 11.10 & 10.10, all but Ubuntu 10.10 had the same problem. Ubuntu 10.10 loaded ok, installed the presented ATI graphics driver as usual but was left with the AMD Unsupported watermark at the bottom right of the screen. The graphics card installed in the computer is an MSI ATI Radeon HD 6670 (in effect an AMD Radeon HD 6670). I am fairly new to linux and while I can install and tweak the OS, I am rather baffled as to what to do. So my question is will an up to date ATI Driver be released in the near future for installation/live disks? Or am I going to have to downgrade my graphics card to use linux? Yours Tom Wingrove

  Read the article

• How do I force Wubi to install a 32-bit version?

  - by marx

  I'm using Windows 8 (32bit) customer preview and installing WUBI Ubuntu 12,04.1. I down loaded 32 bit installer from ubuntu dot com, The wubi installer says AMD 64 xt. I had a previous 12,04 install and in the terminal typed in uname -a, it say's 64 bit. I also opened detail from the system and it read 64 bit system. My question is: how to ensure that a windows/wubi/ubuntu/installer is 32 bit or 64 bit BEFORE making a commitment to install from the wrong wubi install? After posting this I did another wubi installation. Signed into ubuntu, opened system settings, open Details: OS Type 64 Bit. Why is it doing this? I have a 32 Bit machine: Toshiba Satellite A-215 S5818 (previous Windows Vista)<--wiped clean. from an earlier installation of Ubuntu 10.10 which worked, in feb 2012 i installed Win8 Customer Preview Release (32Bit) which took over the BOOT order and 140 GB Hard Disk. I am trying patiently to install WUBI 32 BIT Ubuntu 12.04 Install, it keeps returning 64 BIT install.. Why?? I should also mention that i was successful in a dual boot install ubuntu 10.04/win8 32 bit install and upgraded to 12.04 which is fine for now, but i want a win8/wubi/ubuntu12.04 32 bit working not 64 bit breaking what i have. thank you.

  Read the article

• xorg-edgers PPA with llvmpipe breaks AMD APU system

  - by linux_RRT

  I've read before where this had happened to another user with the same system... I was running Ubuntu 12.04 LTS with Kernel 3.2.0.29 and decided to give xorg-edgers a try. I purged fglrx* and xorg* before beginning. I upgraded with sudo apt-get upgrade -d The system downloaded and installed 109MB worth of data to the system, including llvmpipe which I am very unfamiliar with, and Kernel 3.5.0.11. The system was then rebooted to finalize the upgrade. The system boots to a black screen and then tells me "The system is running in low-graphics mode". Did I miss a step in the install? Or do the newest open-source drivers just not work with my hardware? I realize this hardware (APU) is some of the newer development. I dropped to command via the fallback menu and attempted to boot lightdm as root, but the system hangs in 'Configuring kernel parameters' at Starting initializes zram swaping. ...and then it just sits there. The other thing that concerns me is the output at the top of the screen that says: could not write bytes: Broken pipe Does llvmpipe work for this type of system? To be clear the system is: MSI x370-206us Laptop Radeon HD 6320 AMD e450 APU 1.67ghz dual-core Any help would be much appreciated. Like I said, I'm pretty sure I followed the right order of operations for the install procedure, but I was curious if anyone with similar hardware had experienced anything similar.

  Read the article

• How to efficiently protect part of an application with a license

  - by Patrick

  I am working on an application that has many functional parts. When a customer buys the application, he buys the standard functionality, but he can also buy some additional elements of the application for an additional price. All of the elements are part of the same application executable. A license key is used to indicate which of the elements should be accessible in the application. Some of the elements can be easily disabled if the user didn't pay for it. These are typically the modules that you can access via the application's menu. However, some elements give more problems: What if a part of the data model is related to an optional part? Do I build up these data structures in my application so the rest of my application can just assume they're always there? Or do I don't build them, and add checks in the rest of may application? What if some optional part is still useful to perform some internal tasks, but I don't want to expose it to the user externally? What if the marketing responsible wants to make a standard part now an optional part? In all of my application I assume that that part is present, but if it becomes optional, I should add checks on it everywhere in the application. I have some ideas on how to solve some of the problems (e.g. interfaces with dual implementations: one working implementation, and one that is activated if the optional part is not activated). Do you know of any patterns that can be used to solve this kind of problem? Or do you have any suggestions on how to handle this licensing problem? Thanks.

  Read the article

• accessing live usb files from new hd ubuntu install

  - by Robin Bailey

  After my live USB (ubuntu 12.04 lts) refused to boot, I proceeded to install the same Ubuntu version on the laptop hard drive (a dual boot next to Win xp). This all went well without a hitch. Previous to this, I spent several weeks enjoying and exploring ubuntu from the usb pendrive. During this time I changed lots of settings and customized Firefox and more. Now, I'd like to import the home folder from the usb drive into the new install home folder on the hard disk, which is the purported folder that holds all those special settings to my knowledge. Unfortunately and only being familiar with Windows file systems, the view of the usb file system from the new hdd install is totally perplexing. I can't find anything that looks anywhere close to the original file system. More, I can't find any of the files I had created and stored there, like the LibreOfficeCalc file that has all my passwords (this one is really discouraging) that was stored on the ubuntu desktop. Help me find this file alone and I'll bow down with full apologies to any and all computer gods. Being able to import all those customizing settings into the new install would be a major bonus also, but hey, I'm not greedy. I'll take the passwords file and be happy! And humble! I would be very grateful for some clear, understandable help on this. Thanks

  Read the article

• invitation: Oracle Endeca Information Discovery Bootcamp

  - by mseika

  The Oracle Endeca Information Discovery (OEID) Boot Camp is designed to give partners an understanding of OEID’s features, and how it complements the existing Oracle Business Intelligence suite. Participants will learn how to develop & implement solutions using a Data Discovery method. Training is in EnglishWhat will be covered?The Oracle Endeca Information Discovery (OEID) Boot Camp is a three-day class with a combination of lecture and hands-on exercises, tailored to make participants aware of the Oracle Endeca Information Discovery platform, and to gain valuable skills for the implementation of projects.The course will follow a combination of lectures and hands-on lab sessions, to allow participants to apply the knowledge they have gained by extracting from sample data sources, and creating an end-user application that will be used to answer several business questions. What You Will Learn Architecture: OEID Components, use of graphs, overview of clustering OEID Installation: Architecture planning, infrastructure requirements, installation process, production hints & tips OEID Administration: Data store management, administrative operations, portal configuration, data sources, system monitoring Indexing: Integration Suite, Data source analysis, Graph (ETL) creation, record design techniques Portlets: Studio portlets, custom portlet development, querying functions Reporting: Studio applications & best practices, visualizations, EQL PrerequisitesYou must bring a laptop with you for the Hands-on labs ENVIRONMENT – LAPTOP REQUIREMENTS For the OEID boot camp, participants will perform the hands-on lab exercises using a virtual machine image. These virtual machines will be provided to participants within a cloud environment, requiring participants to bring a laptop to the Boot Camp that can access a Windows server utilizing Microsoft RDP from their laptop. Participants will not need to install any software onto their laptops, but must ensure that they have the proper software installed for their OS, to connect through RDP to a server. HARDWARE • CPU: Dual-core, x64, 1.8Ghz or higher • RAM: 2GB SOFTWARE • Microsoft Remote Desktop Client • Internet Explorer 7, Firefox, or Google Chrome This boot camp is intended for prospective implementers of Oracle Endeca Information Discovery (OEID), or those in a presales role looking to gain insight into the technical benefits of this new package. Attendees should have experience and familiarity with the basic concepts of business intelligence. Where and When ? Monday, October 15th until wednesday, October 17th included 9:00 - 18:00 Oracle France 15, boulevard Charles de Gaulle 92715 Colombes Access Register Here Limited number of seats !

  Read the article

• 11.10 liveCD black screen

  - by Shaun Killingbeck

  Attempting to install/try ubuntu 11.10 on my new laptop, using a liveCD (and tried USB). I get the purple screen (with the man/keyboard at the bottom) and after that the screen flashes bright white before going black. Ubuntu continues to load in the background, with login sound etc but the screen is off. I have tried as many different solutions as I could find including: using nomodestep, xforcevesa, i915.modeset=0 in boot options (seperately): varying consequences, but either I end up at a blinking cursor with no prompt, a command line (startx fails: no screen found), or the original blank screen again Tried booting from VirtualBox - it crashes at the same place the screen would go blank when using a CD/USB tried 11.04: I don't have this problem BUT when trying to install, I get a ubi-partman error 141 (possibly down to the three partitions that came on my laptop... not sure why HP needed there own separate partition for HP Tools...) Model: HP Pavillion DV6 6B08SA Processor: AMD Quad-Core A6-3410MX APU with Radeon HD 6545G2 Dual Graphics (1.6 GHZ 4 MB L2 cache ) Chipset: AMD RS880M Any help would be greatly appreciated. I just want to be able to partition the drive and install Ubuntu. I'm assuming the issue is graphics card related, although I have no confirmation of that. I have caught a glimpse of some output to do with pulseaudio and [fail], but I can't imagine why that would cause a screen problem and the sound definitely works anyway.

  Read the article

• Multiple displays using AMD drivers

  - by Halik

  I am currently running a dual display setup with nVidia 8800GTS video card, on a Ubuntu 12.10 box. The current setup uses nVidia TwinView to render the image on a 1920x1200 display and 1600x1200 one. I'm planning to add a third, 1280x1024 display to the setup. The change will require me to upgrade my GFX card to one supporting triple displays. I'll probably go with Sapphire Radeon 7770 (FLEX edition, to avoid additional active DP-DVI adapters). Before I invest in new GFX I wanted to ask - how well the AMD drivers will support such a setup. It does not matter whether it's fglrx or the OSS ones. If I remember correctly, when running Fedora on a Radeon x800, I had 'void' areas above and below the working area on my second display. The desktop was rendered in 1920+1280 width and 1200 height (which left 176px of vertical space accessible for my cursor and windows but not displayed on the screen - I'd prefer to avoid that). It may have very well been my misconfiguration back then. Generally, are there any solutions from AMD on par with TwinView? Or is it a non-issue at all? Also, I'm wondering about the usual stuff - hardware h264 decoding support, glitch-free flash support, any issues with Compiz/Unity?

  Read the article

• How to fix the boot set up?

  - by Chris

  I got two OSes in my PC, Ubuntu and Windows 7. Until yesterday Windows 7 was on top of my dual-boot menu list, but I wanted to change it, so I went inside Windows configurations and put Ubuntu first, but I also set the time to 0 because I thought I could access Windows through Grub. But what happens is that after I upgraded Ubuntu to 11.10, that screen with boot options don't show Windows 7 anymore. I went online searching for a solution to my problem, most of them told me to configure some Grub options and others to use programs to do it. I've done them all and still can't access Windows 7. Just in case my problem is not clear yet, this is how was my boot order before I messed it all up: Windows 7 Ubuntu with a time of 10 secs to choose between both. This is how I wanted it to be: Ubuntu Windows 7 with 0 time to choose, but, inside Ubuntu I could access Windows through that Grub screen. But this is what happens: Ubuntu Windows 7 0 time, so it don't let me choose anything and jumps inside Ubuntu then inside Ubuntu grub doesn't show up anymore (black screen) and it starts Ubuntu normally. I tried to fix this many times from different ways inside Ubuntu but nothing worked, also when I try do something and then upgrade my grub with sudo upgrade-grub it shows this message: Generating grub.cfg ... Found Windows 7 (loader) on /dev/sda1 Skipping Windows 7 (loader) on Wubi system Found linux image: /boot/vmlinuz-3.0.0-12-generic Found initrd image: /boot/initrd.img-3.0.0-12-generic Found linux image: /boot/vmlinuz-2.6.38-12-generic Found initrd image: /boot/initrd.img-2.6.38-12-generic done Thats why in the title I said it could probably be my WUBI messing all up. Anyone heave a solution for this? Do you need more information? I have a netbook so I cannot use the Windows Repair CD.

  Read the article

• Effect of using dedicated NVidia card instead of Intel HD4000

  - by Sman789

  Short version: Can someone please advise me of the effect of adding a dedicated NVIDIA GeForce GT 630M card to an Ubuntu laptop in terms of power consumption and performance gains/losses when doing general productivity tasks and booting up. Also, how good are the closed source, open source, and Bumblebee drivers for these newer cards compared to support for the Intel HD4000? Long version/Background, if any info here is helpful: I'm thinking of ordering a laptop from PC Specialist (a UK company who actually sell machines without Windows pre-installed) with the following specifications: Genesis IV: 15.6" AUO Matte 95% Gamut LED Widescreen (1920x1080) Intel® Core™i5 Dual Core Mobile Processor i5-3210M (2.50GHz) 3MB 4GB SAMSUNG 1600MHz SODIMM DDR3 MEMORY (1 x 4GB) 120GB INTEL® 520 SERIES SSD, SATA 6 Gb/s (upto 550MB/sR | 520MB/sW) Intel 2 Channel High Definition Audio + MIC/Headphone Jack GIGABIT LAN & WIRELESS INTEL® N135 802.11N (150Mbps) + BLUETOOTH Now, as I want this laptop mainly for work and not for games, I would be more than content with the HD4000 integrated chip which comes with the processor. However, for compatibility reasons, I am not able to get the specs I want unless I choose a NVIDIA GeForce GT 630M 1GB graphics card, which I don't have a great deal of use for. I'm willing to buy it, however, as it's still cheaper than any other laptop with the specs I want. However, I know that Linux power management isn't fantastic with open-source graphics drivers, and I don't much about Bumblebee. Basically, whilst I'm happy to 'tolerate' the card being there, I don't want to experience any negative effects on the rest of my system (battery, performance etc) and if there are likely to be any, I might reconsider my purchase. So if anyone can advise me on the effects, I would be very grateful, since I doubt I can just turn the card off. Thankyou for any assistance :)

  Read the article

• Really slow wireless internet on 12.04 with HP dv6 6070ca

  - by Joe

  I was recently running the previous version of Ubuntu through Wine, and everything was working great. I decided to upgrade to pangolin when I saw it came out. After upgrading the internet was very slow (the estimated time on the updates was something like 4 days). I thought maybe this had something to do with the Wine installation, so I decided to finally do an actual dual boot. I partitioned my drive all nice and neat, but I made the mistake of connecting to the internet for the installation, and clicking the option to install updates and restricted extras. This was in the morning, circa 6 am. Fast forward to the evening, the installation is frozen at around 75%. In frustration I gave the ol girl a hard shut-down, which effectively rendered my machine useless. I used the thumb drive to reinstall Ubuntu, this time without connecting to the internet. Installed nice and easy, no problems, but the internet is still ridiculously slow. It took me about 20 minutes of frustration and hitting stop and reload repeatedly to even get this question page to open. This is important to me as now Windows won't even boot and I have to use ubuntu for the time being but I can't even bear to turn on my laptop due to the frustration that immediately ensues. Please help! Oh, and I'm relatively new so if there are some terminal commands that spew out info you guys would find useful let me know what they are and I'll post back the information.

  Read the article

• Ubuntu 12.04 Freezes at Bootup

  - by Ryan Yu

  I have an Acer Aspire One Model AO722, that has a dual-boot configuration with Windows 7 Home Premium and Ubuntu 12.04. Processor: AMD C-50, 1.00GHz 2.00GB ram, 64-bit, AMD Radeon HD 6250 Graphics. I installed Ubuntu two days ago, and since then, loading it has been sporadic. Windows 7 still loads just fine, but Ubuntu will sometimes freeze. First time I booted Ubuntu up, it ran no problem. Worked with it for half an hour, then shut down the computer. The second time I booted it up, it froze after ten minutes when I was trying to set up Thunderbird. Third time, same thing. Fourth time, it froze about 5 minutes after bootup when I was trying to connect to my wifi. Fifth time, it ran no problems for about 5~ hours. Then, three consecutive times I've restarted (what is it, the 6th, 7th, and 8th times?) it has gotten to the login screen, I've entered my password, all the text on the page disappears as if its going to load my desktop, and it freezes. A minute ago when I booted Ubuntu up for the 9th time, it loaded the desktop fine. Who knows if it'll crash soon; probably, though. Any ideas?

  Read the article

• "The daemon is being inhibited" error message when mounting volumes on a partitioned external HD [closed]

  - by Todd

  I'm having a great deal of difficulty with an external hard drive. I'm currently running a dual boot system (XP Service Pack 3 and Ubuntu 11.04 Natty Narwahl) on a Dell Inspiron B120. I'm trying to set up a new 80 GB Hitachi external HD. Using GParted, I formatted the drive and set up the partitions. The partitioning scheme is as follows 10GB NTFS Primary, 2GB Linux-Swap Primary, 50GB FAT32 Primary, 12GB Unallocated. After applying those changes, I went into Disk Utility and the HD appears along with the correct partitions. When I try to mount the volumes for partitions 1 and 3, I get a pop-up stating: Error Mounting Volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. When I try to to check the filesystem I get a pop-up stating: Error Checking filesystem on volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. Throughout the time that I'm attempting to troubleshoot the problem, the external drive light is on and blinking. With my frustration hitting a boiling point, I try to shut down the drive and remove it so that I can plug in a different external HD that works PERFECTLY. However, when I try to shut down and safely remove the drive, I get a pop-up stating: Error Detaching Drive An error occurred while performing an operation on "80GB Hard Disk" (HTS548080m9AT00): The daemon is being inhibited. Can anyone tell me what I'm doing wrong? I'm a newbie and not that skilled with terminal commands, so please dumb it down for me if you request specific command output.

  Read the article

< Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >