Search Results

Search found 7024 results on 281 pages for 'usb modem'.

Page 138/281 | < Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >

• Need help troubleshooting highly variable ping times

  - by Elliot.Bradshaw

  I'm at work using Citrix (think Remote Desktop) to connect to client sites. With my job I have to write a fair bit of code while I'm connected remotely via Citrix, so the latency of my internet connection is important. If I'm getting ping times above 250ms, then it becomes almost impossible to scroll, click or type with accuracy. Recently my Comcast business internet has been exhibiting highly variable ping times. If I ping google.com, I'll get pings that range from 9ms all the way up to 1300ms. The problem seems to be at its worst during the hours of 1PM to 4:30PM. Outside of those hours and the variance in pings settles down, mostly between 9ms and 50ms. The signal to noise ratio and upstream power are both fine on my modem--the values are here: http://pastebin.com/D4hWGPXf I ran a trace route from my computer to google.com (the results of which are here: http://pastebin.com/GcdjYvMh) and did another test ping to the IP of the first hop outside of our local network (73.98.44.1)--the variance in ping times existed in exactly the same manner as if I were pinging Google. Connecting directly to the cable modem by CAT5 makes no difference. Here is a screenshot demonstrating the variance of the ping times: http://postimage.org/image/haocdeauv/full/ -- as you can see it can get pretty bad. Three Comcast techs have been out (two of them were here when the problem wasn't happening) and they as well as the regional tier 2 Comcast support were unable to diagnose the problem. I now have a ticket open with tier 3 support, but have yet to hear back from them. Does anyone know what could cause these sorts of problems or have any idea from the traceroute above where it could be originating? The regional tier 2 guy tried to tell me that what I'm seeing is normal--are highly variable ping times like that ever acceptable? Anything I should ask Comcast to do or look at to get this problem fixed? Any tips/advice much appreciated! Edit: This is Comcast cable internet at a small start-up, we've ruled out congestion in our private LAN as a cause (i.e., no one's watching YouTube when the pings become variable). Update: Tier 3 Comcast support advised swapping out the modem, a tech came here today and did that--same problem persists.

  Read the article

• Serial Port ttyUSB0

  - by Alex

  I picked up a USB serial null modem cable, so that I can connect up to a headless linux box. As a quick test, I plugged the device into the usb null modem, and the other end I connected to a windows pc. I opened up a terminal on the windows side, with 115200 8N1. On the linux side I opened minicom with the same params. MY problem is that I can type one way from the pc and see the text on the linux minicom side. If I type on the linux side it doesnt show on the pc side. If I reverse the cable it reverses the process. I bet this is a simple issue but I haven't dealt with serial comms in ages. Thanks

  Read the article

• Turn on PC power remotely through the Internet?

  - by W.N.

  I use SVN for my work at home and office, but I usually forget to commit the changes before shutdown. Therefore, I wish I could turn on my home/office PC at office/home. I already have TeamViewer installed on both PCs, so it will be okay as soon as the power is turned on. I have read many articles about this, I found both my PC and office computers support Wake-on-LAN. However, I don't know much about other config. And I need to turn on my computers through the Internet, not on LAN. My office Internet connection has static IP, however, my home Internet connection has dynamic IP, it changes as soon as I reset the modem, but it is not a big problem, I rarely turn the Internet modem off. And I don't have privilege to config office Internet connection, but I have Administration privilege on both PCs. Please give me details steps to turn on my office PC from home, and turn on my home PC from office.

  Read the article

• What protocols will/are ISPs use for IPv6 deployment?

  - by rbeede

  Currently ISPs deal out addresses via DHCP for IPv4 dynamic (single) addresses. What protocol will/are ISPs going to use for IPv6 when they can hand a customer an entire /64 (or /48 if they are nice) block? DHCPv6, RA? For ISPs that support true end-to-end IPv6 will they provide gateway devices (similar to cable modem or true DSL bridges for example) that receive border information for that specific customer? I'm just trying to get an idea of how your common residential service customer will have to configure things in an IPv6 Internet (whenever that comes). Will it be something customers are expected to statically configure on their home wireless router? Today with IPv4 I do it like this: Modem (bridge) passes public IPv4 obtained via DHCPv4 from ISP to second device (wireless router). It in turn has its own DHCPv4 service it provides on the internal lan.

  Read the article

• Lighttpd based server issues crop up when port forwarding

  - by michael

  I have four host computers running lighttpd webservers. they are sitting behind a hspa modem, which each occupying a http port between [81 - 84]. 80 is taken by the modem itself. The port forwarding is setup correctly, however, only a portion of any webpage I request from any of the hosts comes through (they all fails after %20 of the page). If I put the host on port 81 into the dmz, it serves pages fine. The others do not respond to the dmz treatment. Is it possible the web content on the hosts somehow require ports aside from their respective http port? Or is it possible that even though the server.port in the lighttpd_ssl.conf file is set, the individual hosts are still expecting to serve on port 80? I am not familiar with lighttpd, nor did i set them up. they are running on video encoders i purchased. I can grab any files from them required for further information on the problem.

  Read the article

• How do I set up a proxy server for home with bandwidth control, download limit options?

  - by Quakeboy

  3 room mates share a single 2 Mbps connection. Have a 40GB per month download limit beyond which speed drops to 256Kbps which is annoying. One of the roommates abuses the connection by downloading beyond his quota limit. I have a Netgear WNR1000v2 Wireless router + ADSL Modem to connect to the internet. We all access internet via Wireless router which connects to ADSL Modem. I need a free proxy solution which can help me set 40GB / 3 (13 GB) limit for each person (every person has 2 devices - a PC and a phone with Wifi) Uniform Bandwidth control - when 2 people browse the internet they should get 1 Mbps each, and when 3 people access, they should get 2Mbps divided by 3. After each person crosses their monthly download limit, they should be able to access the internet with 256Kbps speed only or lesser. Can I have a custom firmware on my wireless router do this (or) Do I need a proxy server ? Please point me to any relevant tutorials (for example with Squid).

  Read the article

• Explain need for Toredo tunnel adapter pseudo interface~simply please [closed]

  - by bill gregmen

  My laptop was stolen by my ex. I need to know how he used my pc to hack all my accounts. I know the tunnel adapter was not used but I blamed him for using it. I need to explain in court exactly what the device is and what it does. Also haven't figured out how he accessed my computer. I disabled the router recently. Can an external modem be hacked? I was told by my server that the modem I.P. address changes randomly every 4 days. Thank you

  Read the article

• Make Network Manager use bridge for PPPoE instead of only working on ethernet?

  - by Azendale

  My ISP uses PPPoE on their DSL connections. I use Network Manager to connect to this using a bridged modem connected to eth0. Often, I want to test networking things, so a set myself up a KVM machine with a tap interface. I can then connect these interfaces to to virtual 'switches' by adding them to bridges. (I work for my ISP). Sometimes, I want to test cases where the PPPoE is connected more than once. For this, I would like to be able to add eth0 to my 'switch' (a bridge) so the VMs can have a 'bridged modem' connection to the internet. But I would like to still be able to run the PPPoE for my computer at the same time. Which means that I need to get network-manager to run PPPoE over the bridge (or eth0). The problem is that it considers eth0 (and the bridge) 'not managed' by network manager, so it refuses to use it. So, how can I have network manager dial PPPoE over a bridge?

  Read the article

• How to connect MTS MBlaze on ubuntu 11.04

  - by murali_ma

  i have installed ubuntu 11.04 inside the windows xp. i have MTS Mblaze USB Modem. (my service provider is MTS MBlaze,india) i want to use Mblaze into ubuntu so that i did the following steps for make connecting the device. from the task bar->edit connections->mobile broadband->choose country->mts mblaze and ok i give username and password ([email protected] and password MTS. ok now i enable mobile broadband , MTS MBlaze connection1(connection name) from task bar. steps followed from "http://randomshandom.wordpress.com/2010/12/20/how-to-connect-mts-mblaze-device-in-ubuntu-10-10-11-04/#more-3" for the first time it successfully connected and browse the internet. after i restart the system i connect it. it does not connected. it shows Modem network disconnected. i accessed many times and delete the connection and recreated but i does not help me. if i try to connect device i think it the search the network, i saw the wave signal. img Image for showing problem:

  Read the article

• Ubuntu Server 12.04, NAT, Router, DNS. It just doesnt work

  - by Bjørnar Kibsgaard

  I recently inherited some server hardware from work and decided that it could be my main router at home (among other things). Ubuntu 12.04 server installation harware wise goes well and everything is found and working when I boot up. So I begin with setting up eth1 with DHCP. This works fine and it gets a public IP address from my modem and we have a working internet connection. Then I set up my other NIC (eth0) as static (192.168.0.1) and this also works fine. I can access it from other computers in the network. The problems are coming when I am trying to set up a DHCP server with isc-dhcp-server. It seems like it is working and giving the computers IP adresses but after one reboot it stops working. After the reboot eth1 will get a public ip from the modem but it doesnt have internet access. I have to manually run dhcpcd eth1 to get it to work again. As far as I know I havent made any changes to DNS. What am I doing wrong? I have never really had problems with this before. :)

  Read the article

• How to connect MTS MBlaze

  - by murali_ma

  i have installed ubuntu 11.04 inside the windows xp. i have MTS Mblaze USB Modem. (my service provider is MTS MBlaze,india) i want to use Mblaze into ubuntu so that i did the following steps for make connecting the device. from the task bar->edit connections->mobile broadband->choose country->mts mblaze and ok i give username and password ([email protected] and password MTS. ok now i enable mobile broadband , MTS MBlaze connection1(connection name) from task bar. steps followed from "http://randomshandom.wordpress.com/2010/12/20/how-to-connect-mts-mblaze-device-in-ubuntu-10-10-11-04/#more-3" for the first time it successfully connected and browse the internet. after i restart the system i connect it. it does not connected. it shows Modem network disconnected. i accessed many times and delete the connection and recreated but i does not help me. if i try to connect device i think it the search the network, i saw the wave signal. img Image for showing problem:

  Read the article

• Configuring Novel iPrint client on ubuntu 13.10

  - by Mahdi Sadeghi

  Recently I have struggled a lot to make Novel iPrint client to work on my laptop. I need it to use Follow Me printers in our university(you can take your print form any printer). Using this tutorial from Novel, I tried to convert the rpm package and install it on Ubuntu 13.04 & 13.10. The post install script from installing generated deb package had a typo which I saw in post install messages and I fixed that. Now I have the client running. To see the client UI I installed cinnamon desktop(because unity does not have system tray and old solutions did'nt work to whitelist Novel clinet). I have iPrint plugin installed on firefox as well(I copied the shared object files to plugin directories). I try installing printers from provided ipp URL(which lists available printers on the server) with no success. After clicking the printer name I see this: I have various errors: Formerly firefox used to asked my network username/password for installing SSL printer but now it returns this: iPrint Printer - The printer is currently not available. However I can install non-SSL version but the printer location is either empty or points to: file:///dev/null even if I change it to the exact address which I see on working machines still it prints nothing. I have tried the novel command line tool, iprntcmd to print. It is being installed at: /opt/novell/iprint/bin/ msadeghi@werkstatt:/opt/novell/iprint/bin$ ./iprntcmd --addprinter ipp://iprint.rz.hs-offenburg.de/ipp/Follow-me\ -\ IPP iprntcmd v05.04.00 Adding printer ipp://iprint.rz.hs-offenburg.de/ipp/Follow-me - IPP. Added printer ipp://iprint.rz.hs-offenburg.de/ipp/Follow-me - IPP successfully. It adds the printer with empty location and again no print. What I found interesting is the log file at ~/.iprint/errors.txt with strange errors which I hope somebody here can understand. When I try to install the SSL printer I receive these logs(note that HP is my local printer and has nothing to do with iprint): Thu Oct 31 11:02:03 2013 Trace Info: iprint.c, line 6690 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for file:///dev/null - Unknown Port Type - file Thu Oct 31 11:02:03 2013 Trace Info: iprint.c, line 6800 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for hp:/usb/HP_LaserJet_1018?serial=KP103A1 - No Port type specified Thu Oct 31 11:02:05 2013 Trace Info: iprint.c, line 6690 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for file:///dev/null - Unknown Port Type - file Thu Oct 31 11:02:05 2013 Trace Info: iprint.c, line 6800 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for hp:/usb/HP_LaserJet_1018?serial=KP103A1 - No Port type specified Thu Oct 31 11:02:06 2013 Trace Info: mydoreq.c, line 676 Group Info: CLIB Error Code: 0 (0x0) User ID: 1000 Error Msg: Success Debug Msg: MyCupsDoFileRequest - httpReconnect failed (0) Thu Oct 31 11:02:06 2013 Trace Info: mydoreq.c, line 1293 Group Info: CUPS-IPP Error Code: 1282 (0x502) User ID: 1000 Error Msg: iPrint Printer - The printer is currently not available. Debug Msg: MyCupsDoFileRequest - IPP SERVICE UNAVAILABLE Thu Oct 31 11:02:06 2013 Trace Info: iprint.c, line 6690 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for file:///dev/null - Unknown Port Type - file Thu Oct 31 11:02:06 2013 Trace Info: iprint.c, line 6800 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for hp:/usb/HP_LaserJet_1018?serial=KP103A1 - No Port type specified Thu Oct 31 11:02:08 2013 Trace Info: iprint.c, line 6690 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for file:///dev/null - Unknown Port Type - file Thu Oct 31 11:02:08 2013 Trace Info: iprint.c, line 6800 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for hp:/usb/HP_LaserJet_1018?serial=KP103A1 - No Port type specified I should say that my friend can print using the same instructions on CrunchBang easily and another guy on 12.04 LTS but with more struggling. It worked for me on linux mint maya with my old laptop as well. Is there anybody out there who can help me to solve these problems? I am really disappointed with Novell and our university support. PS. I had the same problemwith 13.04. No matter if I am within the network or I connect with VPN, I have the same issues.

  Read the article

• Broadband wireless drivers don't work

  - by user88235

  I have a Dell Latitude E6520 which is a Ubuntu 12.04 certified hardware. However the driver assigned to the Dell Wireless 5630 (EVDO-HSPA) Mobile Broadband Mini-Card doesn't seem to work. When I boot in Windows 7 I connect to Verizon dialing *99# with no username or password but it won't connect using Ubuntu. The windows drivers are from Novatel Wireless Inc 1.0.0.6 if that helps. This is also an internal card not USB and the hardware Id is USB\VID_413C&PID_8194&REV_0002&MI_00 If anyone can help me with obtaining the correct driver or maybe some other way of getting it to work I would be very grateful. My job requires traveling and I need internet access but hate using Win7.

  Read the article

• Installation after boot shows no display

  - by matthias

  I just booted 12.04 for installation from USB-stick. But there is a problem with the display. After boot I see a rectangle on the lower left corner of the screen, after a while I see "Ubuntu 12.04 ..." loading from USB-Stick, the Ubuntu-Desktop starts fine, clicking on Ubuntu-Install seems to work ... till identification, then Installation-window closed and ... nothing more happens. So I want to try Installation direct from the Menu at the beginning - before Ubuntu-12.04-loading. Butt I cannot see any menus at that time. I think there is an graphic-problem? How can I get the installation by menus, how would the Installation via Desktop going to work? Bye Matthias

  Read the article

• How do I know if I am running Wubi or a proper dual-boot?

  - by Don

  I tried to setup a "proper" Windows/Ubuntu dual-boot system, by installing Ubuntu from a USB key. However, I simply could not get the laptop to boot off the USB despite the fact that I made the appropriate changes to the boot device order in the BIOS. So I then turned to Wubi, and (to cut a long story short) it seems I now have a proper dual-boot setup, because I don't need to launch Ubuntu from windows. When I start the laptop, I get that screen that asks me whether I want to run Windows or Ubuntu. However, I'm still not sure if this is a proper dual-boot setup, because when I run windows, it seems that my C: and D: drives are still the same size. If it was a proper dual boot I'd expect separate partitions to have been created for Ubuntu which would have removed some space from the C: and D: drive sizes displayed in Windows. Is there some way that I can confirm whether I'm running a proper dual-boot, and if not, is there some process for converting a Wubi installation to a proper dual-boot?

  Read the article

• An increase to 3 Gig of RAM slows down Ubuntu 10.04 LTS

  - by williepabon

  I have Ubuntu 10.04 running from an external hard drive (installed on an enclosure) connected via USB port. Like a month or so ago, I increased RAM on my pc from 2 Gigs to 3 Gigs. This resulted on extremely long boot times and slow application loads. While I was understanding the nature of my problem, I posted various threads on this forum ( Questions # 188417, 188801), where I was advised to gather speed tests, and other info on my machine. I was also suggested that I might have problems with the RAM installed. Initially, I did not consider that possibility because: 1) I did a memory test with a diagnostic program from DELL (My pc is from Dell) 2) My pc works fine with Windows XP (the default OS), no problems with memory 3) My pc works fine when booting with Ubuntu 10.10 memory stick, no speed problems 4) My pc works fine when booting with Ubuntu 11.10 memory stick, no speed problems Anyway, I performed the memory tests suggested. But before doing it, and to check out any possibility of hardware issues on the hard drive, I did the following: (1) purchased a new hard drive enclosure and moved my hard drive to it, (2) purchased a new USB cable and used it to connect my hard drive/enclosure setup to a different USB port on my pc. Then, I performed speed tests with 1 Gig, 2 Gigs and 3 Gigs of RAM with my Ubuntu 10.04 OS. Ubuntu 10.04 worked well when booted with 1 Gig or 2 Gigs of RAM. When I increased to 3 Gigs, it slowed down to a crawl. I can't understand the relationship between an increase of 1 Gig and the effect it has in Ubuntu 10.04. This doesn't happen with Ubuntu 10.10 and 11.10. Unfortunately for me, Ubuntu 10.04 is my principal work operating system. So, I need a solution for this. Hardware and system information: DELL Precision 670 2 internal SATA Hard drives Audigy 2 ZS audio system Factory OS: Windows XP Professional SP3 NVidia 8400 GTS video card More info: williepabon@WP-WrkStation:~$ uname -a Linux WP-WrkStation 2.6.32-38-generic #83-Ubuntu SMP Wed Jan 4 11:13:04 UTC 2012 i686 GNU/Linux williepabon@WP-WrkStation:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 10.04.4 LTS Release: 10.04 Codename: lucid Speed test with the 3 Gigs of RAM installed: williepabon@WP-WrkStation:~$ sudo hdparm -tT /dev/sdc [sudo] password for williepabon: /dev/sdc: Timing cached reads: 84 MB in 2.00 seconds = 41.96 MB/sec Timing buffered disk reads: 4 MB in 3.81 seconds = 1.05 MB/sec This is a very slow transfer rate from a hard drive. I will really appreciate a solution or a work around for this problem. I know that that there are users that have Ubuntu 10.04 with 3 Gigs or more of RAM and they don't have this problem. Same question asked on Launchpad for reference.

  Read the article

• Graphical Error During Installation of Ubuntu 13.10 32bit

  - by user172353

  In trying to install the latest version of Ubuntu, I made a bootable USB and proceeded to give it a shot. As it loaded, the upper half of the screen displayed staticy, multi-colored horizontal lines, but continued to boot into the installer. The installer appeared to be functional using the keyboard, but I was unable to proceed as the graphical display was a mismatched mosaic of the proper screen with no visible cursor. I'll try to edit in a photo later. Attempting the exact same USB on a different device (an old Asus Eee 1005HA) gave no such error and installed without a hitch.

  Read the article

• Restore Your PC from Windows Home Server

  - by Mysticgeek

  If your computer crashes or you get a virus infection that makes it unrecoverable, doing a clean install can be a hassle, let alone getting your data back. If you’re backing up your computers to Windows Home Server, you can completely restore them to the last successful backup. Note: For this process to work you need to verify the PC you want to restore is connected to your network via Ethernet. If you have it connected wirelessly it won’t work. Restore a PC from Windows Home Server On the computer you want to restore, pop in the Windows Home Server Home Computer Restore disc and boot from it. If you don’t have one already made, you can easily make one following these instructions. We have also included the link to the restore disc below. Boot from the CD then select if your machine has 512MB or RAM or more. The disc will initialize… Then choose your language and keyboard settings. Hopefully if everything goes correctly, your network card will be detected and you can continue. However, if it doesn’t like in our example, click on the Show Details button. In the Detect Hardware screen click on the Install Drivers button. Now you will need to have a USB flash drive with the correct drivers on it. It has to be a flash drive or a floppy (if you happen to still have one of those) because you can’t take out the Restore CD. If you want to make sure you have the correct drivers on the USB flash drive, open the Windows Home Server Console on another computer on your network. In the Computers and Backup section right-click on the computer you want to restore and select View Backups. Select the backup you want to restore from and click the Open button in the Restore or view Files section. Now drag the entire contents of the folder named Windows Home Server Drivers for Restore to the USB flash drive. Back to the machine you’re trying to restore, insert the USB flash drive with the correct drivers and click the Scan button. Wait a few moments while the drivers are found then click Ok then Continue.   The Restore Computer Wizard starts up… Enter in your home server password and click Next. Select the computer you want to restore. If it isn’t selected by default you can pull it up from the dropdown list under Another Computer. Make certain you’re selecting the correct machine. Now select the backup you want to restore. In this example we only have one but chances are you’ll have several. If you have several backups to choose from, you might want to check out the details for them. Now you can select the disk from backup and and restore it to the destination volume. You might need to initialize a disk, change a drive letter, or other disk management tasks, if so, then click on Run Disk Manger. For example we want to change the destination drive letter to (C:).   After you’ve made all the changes to the destination disk you can continue with the restore process. If everything looks correct, confirm the restore configuration. If you need to make any changes at this point, you can still go back and make them. Now Windows Home Server will restore your drive. The amount of time it takes will vary depend on the amount of data you have to restore, network connection speed, and hardware. You are notified when the restore successfully completes. Click Finish and the PC will reboot and be restored and should be working correctly. All the updates, programs, and files will be back that were saved to the last successful backup. Anything you might have installed after that backup will be gone. If you have your computers set to backup every night, then hopefully it won’t be a big issue.   Conclusion Backing up the computers on your network to Windows Home Server is a valuable tool in your backup strategy. Sometimes you may only need to restore a couple files and we’ve covered how to restore them from backups on WHS and that works really well. If the unthinkable happens and you need to restore the entire computer, WHS makes that easy too.  Download Windows Home Server Home Computer Restore CD Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerCreate A Windows Home Server Home Computer Restore DiscGMedia Blog: Setting Up a Windows Home ServerShare Ubuntu Home Directories using SambaInstalling Windows Home Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

  Read the article

• Sun Ray 3 Plus Appliance Announced

  - by [email protected]

  There were many of you out there wondering if Oracle was going to keep and add to the Sun Ray and Sun virtualized desktop product suite, there have been a number of affirmative statements over the last many months. However, none of them resound like this; the introduction of a new product pretty much proves the point. A couple minutes before 3:00, local time yesterday, Oracle announced the release of a new Sun Ray, appliance, the Sun Ray 3 Plus. This is the unit that will replace the SR 2 FS (which has been for sale now since the middle of last decade).  Physically it is about the same size as the 2 FS but there are some significant differences... As you can see there is no smart card reader in the front - that has moved to the top to ensure only one hand is required to insert the card.  There is also a larger surround on the card reader that lights up to show the user the card is being read (properly).  A new power on/off switch is on the front which essentially brings power consumption to ~0 watts, but there is also a new 'sleep' timer looking for 30 minutes of inactivity and then will drop the power consumption down to ~ 1watt. There are also 2 USB 2.0 ports are accessible on the front instead of one.  The standard mic in and headphone out ports are there as well.  There is even more interesting stuff on the back. From the top down there are two more USB 2.0 ports for a total of four, but then the Oracle "Peripheral Kit" keyboard includes a 3-port USB Hub, too.  There's a 10/100/1000 Ethernet port as well as a 1000 Mb SFP port.  Standard DB-9 Serial port and then two DVI ports.  Then there is the really big news.  Two DVI ports driving 2560 x 1600 resolution, each. Most PCs can't do that without adding an adapter card.Now the images I have here are ones taken on a prototype a couple months back.  They are essentially the same as the Production unit, but if you would like to see an image of the Production Sun Ray 3 Plus unit you can see one here. There is a full data sheet available here. So this is the first Oracle Sun Ray desktop appliance.  Proof that the product line lives on.  A very good start!

  Read the article

• Simplest VoIP Solution Yet?

  MyPhone2Go is fully contained on a portable USB flash drive, can be used with just about any Windows computer.

  Read the article

• How to connect two monitors to a macbook pro? [closed]

  - by CIRK

  I have a 13" macbook pro, and I need much more space right now, so I decided to buy two smaller monitors. (these from LG). But I don't really know how will I connect them. I've seen some products like this Diamond BVU195, but it's not currently in stores in my country. I've found these Equip 128450 USB 2.0 Display Adapter DELOCK USB 2.0 to DVI/VGA/HDMI Adapter The second one looks pretty cool, but it says that Windows is a system requirement or what, so I'm not sure if it will work with mac os x? So how did you connected multiple monitors to you mac, and are these adapters the best choices, if yes then is there an OS independent one?

  Read the article

• How to use gps receiver bu-353

  - by Parimal

  Hi I have a gps receiver bu-353 with usb interface i want to know how can i use it under ubuntu I ran the following command gpsd -n -N -D 2 /dev/ttyUSB0 I got the output as: gpsd: launching (Version 2.94) gpsd: listening on port gpsd gpsd: running with effective group ID 1000 gpsd: running with effective user ID 1000 gpsd: opening GPS data source type 3 at '/dev/ttyUSB0' gpsd: speed 38400, 8N1 gpsd: Garmin: garmin_gps Linux USB module not active. gpsd: speed 9600, 8O1 gpsd: speed 38400, 8N1 gpsd: gpsd_activate(): opened GPS (fd 6) gpsd: speed 4800, 8N1 gpsd: NTPD ntpd_link_activate: 0 gpsd: /dev/ttyUSB0 identified as type SiRF binary (2.687608 sec @ 4800bps) gpsd: detaching 127.0.0.1 (sub 1, fd 8) in detach_client gpsd: detaching 127.0.0.1 (sub 1, fd 8) in detach_client after this i started tangoGPS, which said no gps and no gpsd found

  Read the article

• How do I use with LTSP with a Dell FX170 thin client?

  - by v4169sgr

  Just got a reconditioned DELL Optiplex FX170 thin client delivered, without an image. On power-up, I see the message: DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER I am very sure all the wires etc are connected properly. I would like it to PXE boot and find my LTSP installation. I have an HP T5525 with the same connectivity that works fine. On F12 there's a BIOS boot order menu. The only options available though are LS120, the HDD, CD / DVD [via USB presumably], and various USB options. I do not see 'PXE' or any network card. And I don't know how to change the boot order :( Any help appreciated!

  Read the article

• how to use gps receiver bu-353 in ubuntu 10.10

  - by Parimal

  Hi I have a gps receiver bu-353 with usb interface i want to know how can i use it under ubuntu I ran the following command gpsd -n -N -D 2 /dev/ttyUSB0 i got the output as: gpsd: launching (Version 2.94) gpsd: listening on port gpsd gpsd: running with effective group ID 1000 gpsd: running with effective user ID 1000 gpsd: opening GPS data source type 3 at '/dev/ttyUSB0' gpsd: speed 38400, 8N1 gpsd: Garmin: garmin_gps Linux USB module not active. gpsd: speed 9600, 8O1 gpsd: speed 38400, 8N1 gpsd: gpsd_activate(): opened GPS (fd 6) gpsd: speed 4800, 8N1 gpsd: NTPD ntpd_link_activate: 0 gpsd: /dev/ttyUSB0 identified as type SiRF binary (2.687608 sec @ 4800bps) gpsd: detaching 127.0.0.1 (sub 1, fd 8) in detach_client gpsd: detaching 127.0.0.1 (sub 1, fd 8) in detach_client after this i started tangoGPS, which said no gps and no gpsd found

  Read the article

• Strategy for using snapshots to back up Ubuntu Linux server?

  - by MountainX

  I need some backup advice for my home file server. Here are the mount points, volume groups, logical volumes and used/total space of all the volumes on my Ubuntu 8.10 home file server. / vgA/lvRoot [7.5G/50G] /tmp vgB/lvTmp [195M/30G] /var vgB/lvVar [780M/30G] swap vgB/lvSwap [16.00 GB] /media1 vgC/lvMedia1 [400G/975G] /media2 vgC/lvMedia2 [75G/295G] /boot partition (no volume group) [95M/200M] /video partition (no volume group) [450G/950G] /backups vgD/lvBackupTarget [800G/925G] /home vgE/lvHome [85G/200G] I have just added a 2.0 TB external USB drive that I would like to use to backup everything. (It will be a close fit to get it all on one 2.0 TB drive. I actually have a 2nd external USB drive if needed.) I'd like to backup "/", var, /media1, media2 and /home. I'll deal with /boot and /video separately since they are not logical volumes. For all the logical volumes I'm anticipating taking snapshots and then copying those snapshots to the 2.0 TB external USB drive. I have never done a task like that before. If I do that, I could use the tutorial I found here: http://www.howtoforge.com/linux_lvm_snapshots My questions are: What is the best overall strategy? Is it LVM snapshots, as I'm assuming? How should I prepare, subdivide and mount the 2.0 TB external USB drive? 2.a. Should I create one or more regular partitions or should I create a physical volume with one or more logical volumes? 2.b. Would it be advisable to extactly mirror the source pv/lv layout on the external drive, and if so, is this a good strategy? What's the best way to get the snapshots onto the external drive? dd? Even though this is a strategy question, feedback with actual commands is appreciated. I need step-by-step cookbook-style help because I don't do much server admin work. (Background: This is a home file server that I have rarely had to touch in about 2 years. It has done its job without much intervention. The really old PC that I used to back everything up recently failed, so I'm replacing that with the external USB drive(s) and I'd like to upgrade my backup strategy at the same time. Previously, I just copied stuff from /backups over to the other computer and that would not have made things very easy in a real restore situation. The /backups mount point contains backup copies of "most" of the important data on a file by file basis, but it does not contain copies of /boot, etc. BTW, the actual internal HDD that holds /backups is separate from the other storage devices.) EDIT: I'll propose a strategy... The idea came from a comment here: LVM mirroring VS RAID1 "LVM mirrors are for replication of a logical volume to a different physical volume. It's essentially meant to "move the data to a different disk". The mirror is then broken..." That would fit my requirements well. Here is an ideal situation: establish the LV mirror on the external drive break the link with the mirror create a (persistent) snapshot on the mirror after a week, resync the mirror with the original source and update the mirror break the link and create another snapshot on the mirror. Obviously, the mirror will be like a weekly full backup. And the snapshots on the mirror will represent earlier points in time. If this would work and if it would be time efficient, it would give a nice full & differential type backup on the external drive based on LVM. I have not heard of a strategy like this before. Will it work? Could it be scripted? Thoughts? EDIT 2: Creating Portable DiskSafes With LoopbackFS And LVM Snapshots This article seems intriguing: http://www.howtoforge.com/creating-portable-disksafes-with-loopbackfs-and-lvm-snapshots Unfortunately, I don't understand exactly how to map those ideas to the strategy I'm proposing above. I'm going to ask this last bit as a separate question. I will leave my original question in place because I still desire feedback on the overall best strategy. At this moment I'm assuming it is LVM mirroring in the style of "Creating Portable DiskSafes with LVM Snapshots" but that might be wrong.

  Read the article

< Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >