Search Results

Search found 7706 results on 309 pages for 'checked'.

Page 139/309 | < Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146  | Next Page >

• iTunes is not updating my podcast [closed]

  - by user22589

  I update my Podcast every week. But iTunes is not updating my last episode for more than a week. Strangely, those who subscribe my podcast can see the updated episode. But if you're not a subscriber, you can't see the last episode. It's here: http://www.aladinusa.com/podcast/rss.xml I checked it with the W3C validator and it says it's valid (with minor suggestion). Do you have any idea why it's not updated on iTunes? Thanks. Sam Kong

  Read the article

• PPTP VPN Server issue : server = centOS & client = windows 7

  - by jmassic

  I have a CentOS server configured as a PPTP VPN Server. The client is a Windows 7 with "Use default gateway on remote network" in advanced TCP/IPv4 properties enable. He can connect to CentOS without any problem and can access to: The Box of his ISP (http://192.168.1.254/) The CentOS server The website which is hosted by the server (through http://) But he canNOT access any other web service (google.com or 74.125.230.224) I am a beginner with web servers so I do not know what can cause this problem. Note 0 : The Windows 7 user must be able to access the whole internet through the CentOS PPTP proxy. Note 1 : With "Use default gateway on remote network" in advanced TCP/IPv4 UNCHECKED it is the same problem Note 2 : With "Use default gateway on remote network" in advanced TCP/IPv4 UNCHECKED AND "disable class based route addition" CHECKED the Win 7 can access google but with the ISP IP (no use of the VPN...) See Screenshot Note 3 : I have made a echo 1 > /proc/sys/net/ipv4/ip_forward and a iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE

  Read the article

• Computer stopped working (ASUS P5GD1-VM)

  - by Gordonrjones

  My computer stopped working the other day. I came down and it was kind of chirping away. Then, when I restarted it, it only did the same thing. I unplugged everything not needed and it did nothing at all. I thought maybe the power supply wasn't working, but when I took the cover off the green light on the motherboard was on and the power supply is making a little buzzing sound. But nothing happens when I turn the computer on, other than the green light on the motherboard flickers a bit. I checked the memory in other computer and it works fine. I'd love to be able to fix this with as little cost as possible. Can someone here help? P4-640 (3.2E GHz, 800 FSB, L2:2MB, EM64T, HT)

  Read the article

• Installed Ubuntu 11.10, getting hard disk health warnings

  - by Brad

  I'm getting hard disk health problem warnings... When I click the "examine" button the disk utility pops up. None of my drives are reporting any major issues, and the very first drive doesn't even have a SMART button. I don't really care if one of the drives is crashing, I've got everything backed up, but I just want to know how to stop these god forsaken message boxes from popping up randomly. I have already gone into the Disk Utility and checked "do not notify me if this drive is failing" on all of them except the one that doesn't have the SMART button. I've googled about as much as I can for one day.

  Read the article

• How can we recover/restore lost/overwritten data in our MSSQL 2008 table?

  - by TeTe

  I am in serious trouble and I am seeking professional advices here. We are using MSSQL server 2008. We removed primary key, replaced exiting data with new data resulted losing our critical business data in its child tables on MSSQL Server. It was completely human mistake and we didn't have disk failure. 1) The last backup file was a month ago which means it is useless. 2) We created Maintenance Plans to backup our database at 12AM everyday but those files are nohwere to be found 3) A friend of mine said we can recover from Transaction Logs. When I go to TaskRestore Transaction log is dimmed/disabled. 4) I checked ManagementMaintenance Plans. I can't find any restored point there. It seems that our maintenance plan hasn't been working. Is there any third party tool to recover lost/overwritten data from MSSQL table? Thanks a lot.

  Read the article

• Outlook 2010 stopped marking messages as read after reading them

  - by dunxd

  Yesterday I noticed that Outlook 2010 had stopped marking messages as read unless I right click and select Mark as Read. I have checked the Reading Panel settings (it's set to 0 seconds), but I don't use the reading panel to read my mail. When I open a message by doubleclicking it, then close it again, the message is still marked as Read. Outlook 2010 is connecting to Exchange Server 2003. This was working fine until yesterday. As far as I know there have been no config changes at either the client or server end.

  Read the article

• Folder redirect policy does not apply to one user

  - by Yoffe

  I'm running Windows Server 2008 R2, my station runs Windows 7. while defining folder redirection policy (and others) I find that the redirection does not apply (or appear) in rsop.msc checkout. First thing I've checked is restrictions on the folders where the My Documents folder will be redirected to, I have set full rights for my user on those folders (on the server), and yet I get no actual result. Eventually I decided to add my specific user to the scope under the Folder Redirection policy, and well - still nothing... Would love some clue about what can be wrong.

  Read the article

• Grub2 menu after vmware gust customization

  - by poopa

  Hi, I have ubuntu 9.10 desktop VMware VM with the default grub2 installed. There is some weird problem with this VM. When you clone this vm and have a customization script run, the cloned machine crashes at first boot (VMware does not officially suport customizaing Ubuntu newer than 8.04). After the creash the Grub boot menu is displayed but there is not time out. I checked /boot/grub/grub.cfg and it does indeed show a timeout of 10 seconds. Nothing happens till I select an option with the keyboard. The second time the Ubuntu loads, it does not crash. My question is, how do I make the grub menu timeout in that case? Thanks.

  Read the article

• Group Policy dealing with IE zone assignment not sticking!

  - by Brandon

  I have a group policy (which ONLY deals with the zone assignment) -that is continually switching on and off with reboots. I thought it was a conflicting group policy but when I run group policy modeling report it doesn't show any descrepancies that I can see. I thought it may be an issue with one domain controller wasn't replicating my policy change to the other one, but this isn't the case. I checked both domain controllers and they show the same information. The assignment is on a user basis and is in: user configuration > administrative templates > windows components > internet explorer > internet control panel > security and is site to zone assignment.

  Read the article

• Can't access sub domain from my network [closed]

  - by Maninder

  I am trying to access http://www.abc.xyz.com from my network, but not able to do so. However, http://www.xyz.com is opening fine in my browser. Asked a friend to open abc.xyz.com from his machine(in a different network), its opening fine. Checked my firewall settings as well. There's no such rule to deny the specific site or something that could be denying access to the sub domain. Kindly advise, how I can troubleshoot my problem.

  Read the article

• Computer restarts infinitely after Bios/Motherboard screen

  - by user13176

  Like every morning I turn on my computer (which is kinda new and only couple months old) and I never had any issue with it until now. It starts booting, shows that very first screen which has some motherboard picture and stuff and then it show which buttons to press to enter BIOS and etc. Then it suddenly restarted and after that just kept restarting every 3-5 seconds forever. What could that be? I unplugged power cable, checked all the cables, moved a case, it had some wires stuck under it, blew some dust (but didn't open the case yet) and I tried to boot again and it booted successfully and I am writing this issue now. My specs: i3-3220 3.30Ghz 8GB DDR3 RAM 1TB HDD GeForce GTX 650 Windows 8 x64 I also recently upgraded my security software (that's the most recent thing I did) and it includes ZoneAlarm firewall, Comodo Antivirus and Spybot Search & Destroy. But maybe it doesn't have anything to do with this. Cheers

  Read the article

• Windows command FOR /F isn't working?

  - by Mark Ransom

  I'm trying to use the FOR command in Windows XP's command line. I have a file temp.txt with 3 lines: temp1 temp2 temp3 And I'm typing the following command at the prompt: for /F %p in (temp.txt) do echo Testing %p Nothing comes back. If I remove the /F parameter, the output is Testing temp.txt. As far as I can determine, I'm using the command exactly as it is documented by Microsoft. I've checked my registry to make sure Command Extensions are on, and even started a new shell with cmd /e:on to be doubly sure. What am I doing wrong? Yes, I was doing something wrong. The file temp.txt wasn't created from scratch, I just edited it to put in my test content. Unfortunately when I created the file the first time, I saved it with a UTF-8 marker at the front. Recreating the file as plain text solved the problem.

  Read the article

• No SATA drives after PSU Upgrade

  - by hauptbenutzer

  I know this sounds a lot like this but I just confirmed that my MBR is fine as well as the SSD drive in question. What happened: I upgraded my be-quiet 700w PSU to the 1000w dark power pro. When I tried booting the system and none of the drives (all SATA) were detected, resulting in the "Boot device failure" error. After that I unplugged all but the boot drive, triple checked that all cables were in fact nice and tight inside their sockets, replaced both e-SATA and power cables ; still with the same outcome. Finally I reconnected my old PSU and sure enough the PC booted without any hassle (except of course for the direful construction that is currently occupying my desk). Does anybody have any advice on how to proceed? Surely, it is possible the PSU is faulty but are there other explanations? Thanks in advance PS. if of any help: Motherboard is GIGABYTE GA-PH67A-UD3-B3 H67 LGA 1155

  Read the article

• Error code 0x80070035. The network path was not found

  - by user144606

  My system is connected with a local LAN connection with 30 PC's. I'm not able to access the shared drive in the network, but I'm able to ping the IP address in which the drive is present. I have checked to start all the services, which are to be started and i have check the TCP/UDP ports also, but even after that I'm not able to access the drive, the same error message is being displayed again and again. Please help me to rectify the problem. I'm trying to solve the problem for the last 1 week. I have tried various solutions which are present in various web site, but I'm not able to find a proper solution. So please help me.

  Read the article

• What editor/viewer to use to inspect large text based files?

  - by Turismo

  Are there any text editors/viewers (preferably on windows but other platforms are also ok) that can handle files of 500 MB or more? The editors I checked so far (Notepad++, Notepad, Eclipse) all choked on files of that size. Edit: Many thanks for the great suggestions. I tried gvim as it was the top voted and was available on Windows. I opened the file in a reasonable time. After that scrolling and searching was very smooth as long as syntax highlighting was turned off. From the other editors mentioned TextPad and EmEditor both claim to be able to handle large files very well. EmEditor seems to be built exactly for editing large files. I'll probably try both and report back.

  Read the article

• Gigabit connection between 2 computers

  - by Alecu

  I am trying to set up a connection between 2 pc's. It's a direct cable connection. The problem that I am having is that the connection isn't gigabit. I know both network cards support gigabit. I checked in the device settings and in one pc I can see in the Speed & Duplex the 1Gbps option but on the other pc I can't see that option despite the fact that the network card is gigabit. I have quite some files to copy from one pc onto another and I really need a good connection between them. I can't really remove the hard drive because it would void the warranty. Could this be a driver issue or a cable issue? On both pc's I have windows 8. The network card on the pc that doesn't have the 1 gbps option is an Atheros ar8161 card.

  Read the article

• CNAME lookup failed temporarily. (#4.4.3)

  - by klickverbot

  A friend of mine just told me that he can't send mails to accounts on one of my servers via the SMTP server provided by his ISP. The error message in the bounce he gets reads: Hi. This is the qmail-send program at aon.at. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <[email protected]>: CNAME lookup failed temporarily. (#4.4.3) I'm not going to try again; this message has been in the queue too long. Any ideas what could be the reason for this? I have double-checked the DNS records for my domain, but they seem perfectly fine, and from any other mail servers I tested, delivery works flawlessly…

  Read the article

• Windows xp keeps rebooting itself every morning at 8am?

  - by mark

  Hi, I've got windows xp sp3. It seems to restart itself every morning at 8am (judging by the windows logs, I can see all apps log a startup at 8am every day). Whenever I get to the machine in the morning (around 9 am) I see it's rebooted. I've checked that automatic updates are off, and that the power management settings are set to "always on". I'm not sure what else could be causing the machine to reboot, not sure where to start looking. Any ideas? Thanks ---------- update ---------------- Just looking at the Event Viewer, I see a log message at 8:00:47am every day, which looks like a reboot log statement: Microsoft (R) Windows (R) 5.01.2600 Service Pack 3 Multiprocessor Free. For more information, see Help and Support Center at ...

  Read the article

• Can't connect to web-server on local host behind NAT

  - by eyeinthebrick

  I got Ubuntu as host. I'm running a web-server on http://192.168.199.8:80. It is accessible from the local network, but when I'm trying to reach it by external IP, I go to my router's web-page. I arranged port forwarding on router for port 80 to my local IP 192.168.199.8. Unfortunately web-server is still unavailable via external IP. I checked whether the port is open via http://www.canyouseeme.org/. As it showed that the port is unavailable, I changed port used to 3659 (not forget to rearrange port forwarding rule). Although http://www.canyouseeme.org/ shows that port 3659 is open, I still can't reach my web-server. Where can the problem be?

  Read the article

• Shared printer can't be added

  - by Sandokan

  We have a small training network with server 2003, and XP clients and users in a AD domain. A printer is connected to a client with USB. We are trying to share the printer to all the users but it's not working. We come so far as the users can see the printer when they search for it. But when they try to add it, there appears a pop up window for user name and password. No matter what user name we try it doesn't work. We have checked the shared printer's security settings and they are all in order. Everyone has printer rights. But even with full rights it doesn't work. The only ones it works for are Domain Admins. Anyone have any ideas?

  Read the article

• Why can't I set Windows 7 folder to Writeable?

  - by Clay Nichols

  Moved a SATA HD from one PC to another. Copied almost all the files from old drive to new, except for one folder ("oldFolder") and it's subfolders and files. I tried to copy just a single file (to simplify things): Can't copy that file to same directory. (get above error) CAN copy file to Desktop. Can not copy files' container folder to Desktop. Under Properties for that OldFolder: Read Only is Checked. Security: Everyone set to Allow everything except "special permissions" All users are set to allow WRITE.

  Read the article

• Finding documentation for /etc/**/*.dpkg-*

  - by intuited

  During upgrades, files with these extensions appear in /etc and its subdirectories. I gather that *.dpkg-dist contains the file that was distributed with the currently-installed version of a package, and *.dpkg-new contains the version from the version being installed, however I'd like to see the docs to be sure that I'm getting it right. Also there are occasionally other similarly named files, eg *.dpkg-original, and I'd like to be able to read up on these. I've checked /usr/share/doc/dpkg for documentation on this, and come up empty; there's no dpkg-doc package; Google doesn't have anything except unanswered questions. Can someone point me to the documentation for this aspect of debian package management?

  Read the article

• DNSCache excesive memory usage Windows Server 2008 R2

  - by MikeT

  We are having an issue with the dnscache service where its memory usage is becoming excessive (~6GB) after a week or two. Restarting the service frees this memory but performing ipconfig /flushdns does not, an ipconfig /displaydns shows aprox 15-20 entries in the cache. We have checked and there appears to be aprox 150 DNS queries per second taking place but I would not expect this to have the effect of causing this memory issue. I have tried to search MSDN for hotfixes or bug reports but I could only find a reference to a memory leak in windows 2003. can anyone suggest how to proceed.

  Read the article

• Is it possible to allow saved passwords for remote desktop in a domain environment?

  - by user2813274

  I have checked the "remember password" and every single time, even if it connects correctly after I type a password and check the box, it does not allow subsequent logins using the stored password, saying that it is invalid - is it being saved improperly somehow? is it being disabled by some obscure setting somewhere? (which would be very counter-intuitive, seeing as how the check box is available). I have tried both with domain and non-domain (local) admin accounts, and am using the FQDN for the server. edit: as a troubleshooting step, where would one go to find the (hopefully hashed) password?

  Read the article

• How do I block my ISP from framing websites?

  - by PJB

  I've noticed recently, as of today, that all the websites I visit (except for a specific few sites such as Google) are all put into a frame. I'm not sure what the reason for this is, there are no ads displayed and everything appears normal. The only reason I found out is because the headers weren't loading correctly and none of the page titles showed up properly - I quickly checked the source code and saw that instead of the source of the page I was expecting to see, there was a single line with a frame. I first thought maybe somekind of trojan, but after going through various checks I've determined it's my ISP and/or somekind of Internet Registry (I traced the IP shown in the source code) What can be done to prevent this frame, short of using a VPN? I feel like I am being spied on. PS: I'm located in South Korea.

  Read the article

< Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146  | Next Page >