Search Results

Search found 25447 results on 1018 pages for 'chester is back'.

Page 139/1018 | < Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146  | Next Page >

  • Laptop Toshiba Satelite M300 screen is completely blank.

    - by Nadia
    Hi, My laptop Toshiba satelite M300 Laptop screen is completely blacked out. It powers up and appears to be running but the screen is blank. I've taken battery pack off and back on again. Before the screen was blacked out, it used to flicker a bit. Also before it blacked out i was having problems with the internet and I was on phone to Internet provider who took me through steps to take my laptop back to a future date where it was operational. It then worked properly for a few days but then switched it on and screen was blank. It's more then a year old so out of warranty. Any suggestions on whether I should pay the $300 bucks to see if they can fix it?

    Read the article

  • computer reboots randomly, can't find ssd

    - by John Barry
    My comp's been restarting at random times, and when it comes back the SSD drive can't be found by the BIOS and it doesn't boot. Powering down and starting up again fixes it 90% of the time, with a second reboot occasionally required. Does not seem to be heat related; it's never happened with me actually on the computer. It has happened while acting as the squeezebox server, however. It's a Sandy-Bridge i7 arch if that helps. To add: I've also run Windows Memtest and it came back with no issues.

    Read the article

  • Need some critique on .NET/WCF SOA architecture plan

    - by user998101
    I am working on a refactoring of some services and would appreciate some critique on my general approach. I am working with three back-end data systems and need to expose an authenticated front-end API over http binding, JSON, and REST for internal apps as well as 3rd party integration. I've got a rough idea below that's a hybrid of what I have and where I intend to wind up. I intend to build guidance extensions to support this architecture so that devs can build this out quickly. Here's the current idea for our structure: Front-end WCF routing service (spread across multiple IIS servers via hardware load balancer) Load balancing of services behind routing is handled within routing service, probably round-robin One of the services will be a token Multiple bindings per-service exposed to address JSON, REST, and whatever else comes up later All in/out is handled via POCO DTOs Use unity to scan for what services are available and expose them The front-end services behind the routing service do nothing more than expose the API and do conversion of DTO<-Entity Unity inject service implementation to allow mocking automapper for DTO/Entity conversion Invoke WF services where response required immediately Queue to ESB for async WF -- ESB will invoke WF later Business logic WF layer Expose same api as front-end services Implement business logic Wrap transaction context where needed Call out to composite/atomic services Composite/Atomic Services Exposed as WCF One service per back-end system Standard atomic CRUD operations plus composite operations Supports transaction context The questions I have are: Are the separation of concerns outlined above beneficial? Current thought is each layer below is its own project, except the backend stuff, where each system gets one project. The project has a servicehost and all the services are under a services folder. Interfaces live in a separate project at each layer. DTO and Entities are in two separate projects under a shared folder. I am currently planning to build dedicated services for shared functionality such as logging and overload things like tracelistener to call those services. Is this a valid approach? Any other suggestions/comments?

    Read the article

  • Random greyed unresponsive screen on netbook

    - by user643722
    I love my Asus Eee PC 1000 Ubuntu 12.04 netbook, but I have a little problem. As I use it, the screen will randomly turn grey and become unresponsive. I can then only wait, until perhaps 10-60 secs. later, when I can interact again. Only the bar at the top of my screen retains its colour throughout. I thought it might be Firefox, as I have a lot of tabs open. I installed Chromium, used it instead, and the problem remained. A while back I upgraded from 1 to 2 Gb RAM. So, I thought recently, maybe I should increase the swap-space. I have 738Mb of 7.2Gb free on root; and 2Gb of 28Gb free on my home drive. I bought a 32 Gb SD Card and assigned 4Gb to swap space. cat /proc/swaps reports that the partition is being used. Alas the problem remains. Does anyone know what's wrong with my machine? The SD Card has changed my machine somewhat, but the greying still happens. I ran free -m shortly after another episode, and received: total used free shared buffers cached Mem: 2004 1731 272 0 370 769 -/+ buffers/cache: 591 1412 Swap: 4073 0 4073 Update: Using 'top', I can see that compiz uses about 43% of the CPU (#1 position) when the greying occurs. After the greying, compiz drops back down to its usual 8% of CPU.

    Read the article

  • How can I continue audio playback even after switching user?

    - by klyonrad
    I just tested it with iTunes; after switching the user account (only after logging into another account, to be precise) the audio playback from the account "A" stops. However iTunes continues playing in the background; which I realized after switching back to account "A". Very frustrating because it kind-of is a deal-breaker for me; the other person should be able to have some personalized settings; while it is still my computer, and the main account has all the music obviously. The ideal solution would be audio output continuing running while user still has the ability to manually pause it... EDIT: I tested a bit more: "Desktop" apps like VLC don't output sound but continue running; the stock Music.app in Metro pauses the music and continues playing when switching back.

    Read the article

  • IPv6 feature in Network Adaptor is Slowing Internet

    - by Teknophilia
    The past few days, my internet browsing has become very poor. It's not a matter of speed, as a speed test will give at least 15Mbps. It seems as if my laptop has a hard time actually connecting to the sites. I've found a possible culprit, but don't know why it would affect anything: Going to adapter settings and disabling ipv6, but leaving ipv4, my browsing is back to normal. Re-enabling ipv6 brings back the issue. This is strange though, because I have always had ipv6 enabled. Moreover, using sites to test ipv6 compatibility, I fail with ipv6 enabled on my adapter, and pass when it's disabled. Ideas about why this is happening, and how to fix it?

    Read the article

  • How you choose your first job as a programmer? [on hold]

    - by sliter
    For Brief I am a recently graduated CS student. I am looking for a job these days, but I have no idea what kind of software development jobs I like(embedded system,web development or else...). And I am looking for your advice. Here is a little more While I was a student, I had an one year internship experience as a system engineer in a semi-conductor company where I wrote Linux driver, tuned system performance, etc.. I was happy about this experience as it allowed me to deepen my understanding of the operating system and different low level things. And I thought "Em, I will continue in the embedded area after I graduate". At the end of my study, I am doing an another internship in web development, both front-end and back-end. And I also enjoys a lot the process of learning new things and making it work (Backbone, Node, socketio, etc..). Now, when I am looking for a software development position, I do not know what to apply! All I know is that I want a job which allows me to keep up with the trends instead of repeating. But besides this, I've no idea what specific type of job I want to do. Turn back to embedded system? Continue with web development? Change to other promising areas(data mining)? All these development positions makes no big difference to me. But I think this is not good and I need some criteria at choosing. So I am looking for advice and I would really appreciate if you can share your experience.

    Read the article

  • Started an application through SSH, command line now gone, what happens next?

    - by Chris Dutrow
    Context: This is a very basic question Using Putty and SSH for the first time to do some serious server setup and run into the situation where I have started a process that I do not want to stop. The process is the gunicorn WSGI HTTP Server (running on Centos 6.3). The command I used to start the process is (as per their Quick Start): gunicorn -w 4 myapp:app At this point in the work session, I have lost the command prompt. This must be such a non-issue that it doesn't even enter into an experienced user's consciousness. But unfortunately at my level of experience, I am left with several fundamental questions: Does the fact that I have lost the command prompt mean that the process is still running? How do I get back to the command prompt without killing the process? How do I come back and monitor the process later? How do I eventually kill the process? Any help is appreciated, thanks so much!

    Read the article

  • Windows Server 2008 Enterprise. Incorrect password on screensaver

    - by LarsErikP
    First some software details: Thin client: Wyse C10LE Citrix - Windows Terminal Services - Windows Server 2008 Enterprise desktop I have a user with a very strange problem. When he locks his screen with Win+L, Windows claims he's entering wrong password when he tries to log back in. The only solution is to hard reboot the WYSE, and log back in. This reboot doesn't kill his Windows session. I've checked for errors in keyboard settings (wrong layout etc), nothing found. I suspect errors in his profile/errors in AD. No other users in the domain has this problem. EDIT: Sorry, it's NOT Win R2. Plain Windows Sever 2008

    Read the article

  • Do I have to reinstall Mac OS in case something goes wrong during a Windows Boot Camp install?

    - by Rich Jennings
    I have a Macbook laptop running Snow Leopard, there's absolutely no information on the laptop, just a few unimportant files on it, I wanted to use Boot Camp Assistant (version 3) to create a partition and install Windows on it to run Windows alongside Mac OS. My CD/DVD drive doesn't work at all so I'm gonna have to mount Windows on a USB stick and install it from there. My question is, when I start Boot Camp it asks me to back up my files but I have nothing to back up, I was just wondering, in case I go through with the Windows install and something goes wrong do I have to reinstall Snow Leopard? My Snow Leopard install DVD can't be read by the laptop that's why I ask, I wouldn't know what to do if I had to reinstall it.

    Read the article

  • How to clone & restore virtual box hard drive

    - by user23950
    What I want to do is to clone my virtual box hdd with dual boot os. Xp and Vista. I'm using acronis and back it up on a flash drive. And end up with the flash drive that is partitioned. 2 partitions just like the virtual box hard disk. What do I do to restore it. I'm running acronis inside virtual box. What do I do to make use of the backup and actually restore what I've back up. And to be able to boot to xp and vista again inside virtual box. Please help.

    Read the article

  • SunSpace - a sentimental moment

    - by me
    I just came back from California where I had a little sentimental moment.With the great help from some former Sun colleagues we move the old SunSpace gear into a new data center in Santa Clara.We will re-purpose the hardware as a new development infrastructure to build integrated demos around Oracle WebCenter products, Business Applications and Social Services. now - I could not resist to restart the SunSpace applications and see if it still works. And hey - even though we had to re-IP the entire  stack (sun.com domain is gone) and with some little hacking (thanks to Apache reverse proxy) -  we got it back! Hey Max - now I just need to change your SSO hack to get login working again Hmm - I won't - but it is really nice to see it working again .. and it's time to switch it off and to work  on the next cool things .. Do you know Oracle WebCenter Sites (formely Fatwire)? Its Oracle's Web Experience Management Solution - a pretty cool technology and a very slick User Interface. I specially like the drag&drop functionality which allows non technical users to easily publish content.  Why do I mention it here ?  Because we will use the SunSpace gear to build cool  Oracle WebCenter Sites demos and proof of concepts integration  into Business Applications and Social Services  This is a sneak preview what we are working on. Stay tuned.....

    Read the article

  • rewrite map (prg:) never finishes

    - by SooDesuNe
    using Apache and a prg type rewrite map. My map looks like: #!/usr/bin/perl $| = 1; # Turn off buffering while (<STDIN>) { print "someothersite.com"; } the rewrite rule declared in httpd.conf is: RewriteMap app_map prg:/file/path/test.pl RewriteRule (\/[\w]+)(\/[^\#\s]+)?$ http://${app_map:$1}$2 [P,L] And the log files show: init rewrite engine with requested uri /a/testlink.html applying pattern '(\/[\w]+)(\/[^\#\s]+)?$' to uri '/a/testlink.html' It appears like test.pl is never giving control back to apache, when the map is successfully found I expect to see this output in the log file: map lookup OK: map=app_map key=/a -> val=someothersite.com Why is my map not returning control back to apache?

    Read the article

  • Ctrl-Alt-F1 never gives prompt

    - by nispio
    When I press Ctrl+Alt+F1 in my Red Hat Enterprise Linux 6.4 (Santiago) I get a black screen with a blinking cursor, but I never get a login prompt. I can get back to my desktop with Ctrl+Alt+F7, and things work as normal. However, when I run sudo init 3 I get the same thing, but this time I am stuck at the screen and can't get back without a reboot. I'm not even sure where to start looking for the cause of this problem. Are the startup scripts that might be causing the problem or other system configurations that could lead to this? If this is not an known issue, what steps should I take to debug?

    Read the article

  • My sound is not working, so I'm going to reinstall FYI [closed]

    - by fer
    I've had trouble getting the sound to work in Ubuntu 12.04 I'm running an Acer Aspire 5739g laptop. This is using a clean install. This wasn't a problem when ubuntu first installed. Rather, it was when I ran the updates that it stopped working. I already tried the suggestions on the ubuntu sites and other similar queries, and they haven't fixed it. Something in the updates is making my sound not work. Edit: It turns out that this might be a bug (the sound issue, first paragraph). After reinstall, it happened again (it's not caused by updates at all, or any software, because I fixed it now w/o reinstall). It seems like I replicated it as follows: I changed auto-hide in the behavior tab of Appearance settings by turning it on, and setting the sensitivity to below the recommended setting. Then instead of restarting, I just logged out and back in. The sound stopped working again. I set the behavior settings to default, restarted, and now it's back to normal. Not sure if it's due to only logging out (and not restarting) or b/c I set my sensitivity to a low setting. Not sure if this helps anyone, but thought I'd mention it.

    Read the article

  • Restore data from one Windows edition to another

    - by Lindhe94
    I have a Swedish Windows 7 Home Premium on my PC, and I really want to change system language to English. I know that Home Premium can't change system language (only W7 Ultimate does that), so I consider buying an English version and make a clean install. However I do have many settings, programs etc that I don't want to lose. I therefore have two questions: Can I take a backup of my Swedish W7 Home Premium, install the English W7 Home Premium and then restore everything back to normal, except the system language is now English? Can I take a backup of my Swedish W7 Home Premium, install W7 Ultimate and then restore everything back to normal (now with the option to change system language)? Thanks!

    Read the article

  • Lenovo Windows 8 EFI restore from image

    - by anderhil
    First time here. I have bought e530 with windows 8 and the first hour of work with it i have a problem. I have ssd with windows 7 which i want to use with my new e530. I have made a sysprep of win 7 and installed ssd to the e530. The HDD which was inside e530 i want to use as second hdd instead of my DVD Drive. I connected this HDD through usb-to-sata adapter to copy some files from ssd to the hdd. Unfortunately it didn't see the file system on the HDD (but first time i have booted to it and first boot into Windows 8) I've made some mistakes and i corrupt the filesystem on the hdd. I tried bunch of tricks to recover the GPT, but it didn't work. I have managed to recover the Lenovo_Recovery partition to my ssd using recovery tools. And now I'm stuck, with this new things to me - EFI, GPT, etc i don't how this stuff works, and i have been trying to understand this for hours - but nothing seems to work. I want to restore the Windows 8 to the hdd, so it is there alive. What i have done so far: Formated the HDD I took the PBRALL file from the Lenovo_Recovery " convert gpt create partition Primary size=1000 ID=DE94BBA4-06D1-4D40-A16A-BFD50179D6AC gpt attributes=0x8000000000000001 assign letter=W format quick LABEL=WINRE_DRV create partition efi size=260 assign letter=s format quick fs=fat32 LABEL=SYSTEM_DRV create par msr size=128 create partition primary noerr assign letter=t format quick LABEL=Windows8_OS shrink desired=12197 create partition Primary ID=DE94BBA4-06D1-4D40-A16A-BFD50179D6AC gpt attributes=0x8000000000000001 assign letter=q format quick LABEL=Lenovo_Recovery " it recreated the partitions copied contents of SDRIVE.zip to SYSTEM_DRV partition copied contents of WDRIVE.zip to WINRE_DRV partition Copied restored Lenovo_Recovery back to Lenovo_Recovery partition So now I have 3 system partitions: SYSTE_DRV BOOT boot.sdi EFI BOOT bootx64.efi LenovoBT.efi Lenovo ... Microsoft ... WINRE_DRV\Recovery\WindowsRE\winre.wim Lenovo_Recovery (whic contains install.wim and bunch of other things) So i put back the HDD inside the laptop and tried to boot - but nothing works. It just doesn't boot to anything - no errors - nothing at all. When I choose this HDD manually for boot - just black screen blinks and that's all - it returns back to the devices boot menu. SYSTEM_DRV is EFI partition, so I don't understand why it doesn't boot, it has files needed inside. Can anybody tell me what should be done to make it boot to recovery console or smth like that? How to restore the Windows 8 from the Lenovo_Recovery install.wim image? As I understand I have all the files where they should be, but why it doesn't work? How to troubleshoot such things? Also, if somebody has good link where EFI booting process is explained in details that would be great. Cause i still don't understand how it knows what partition to boot?

    Read the article

  • Now that Apple's intending to deprecate Java on OS X, what language should I focus on?

    - by Smalltown2000
    After getting shot down on SO, I'll try this here: I'm sure you'll all know of Apple's recent announcement to deprecate Java on OS X (such as discussed here). I've recently come back to programming in the last year or so since I originally learnt on ye olde BASIC many years ago. I have a Mac at home and a PC at work and whilst I have got Windows and Ubuntu installed on my Mac as VMs, I chose to focus my "relearning" on VB first (as it was closest to BASIC) and then rapidly moved to Java as it was cross platform (with minimal effort) and so it was easiest to work on code from both OSes. So my question, if the winds of change on Mac are blowing away from Java and in this post-Sun era, what would be the best language to focus my new efforts on? Please note, this isn't a general "which language is better?" thread and or an opportunity for the associated flame-war. There's plenty of those and it's not the point. I realise that in the long term one shouldn't be allegiant to an individual language so, taking this as an excuse, the question is specifically which is going to be the most quick to be productive on given the background whilst bearing in mind minimum portability rewrites (aspiration rather then requirement) and with a long term value of usage. To that I see the main options as: C# - Closest in "style" to Java but M$ dependent (unless you consider Mono of course) C++ - Hugely complex but if even slightly conquered, then a win? Is it worth the climb up the learning curve? VB.Net - Already have background so easiest to go back to but who uses VB for .Net these days? Surely if using a CLI language I should use C#... Python - Cross-platform but what about UI for the end-user? EDIT: As a usage priority, I envision desktop application programming. Though the ability to branch in the future is always desirable. I guess graphics are the next direction once basics are in place.

    Read the article

  • No Unity after ubuntu 12.10 upgrade

    - by Aivaras
    After I upgraded to Ubuntu 12.10 from 12.04, there was low graphics and no Unity. Just the mouse and the wallpaper. So, I got into the terminal via Ctrl+Alt+T, launched Chrome and searched for a solution. As a result, I tried this: sudo sh amd-driver-installer-12.6-legacy-x86.x86_64.run It did not work. Then I tried this: sudo add-apt-repository ppa:makson96/fglrx sudo apt-get update sudo apt-get upgrade sudo apt-get install fglrx-legacy It did not work too. I removed the repository, got back the the xorg version to 1.13, and tried this: sudo sh /usr/share/ati/fglrx-uninstall.sh sudo apt-get remove --purge fglrx fglRx_* fglrx-amdcccle* fglrx-dev* xorg-driver-fglrx sudo apt-get remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon sudo apt-get install xserver-xorg-video-ati sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core It did return the screen resolution back, but still no Unity. Is there something what could I do? My graphics card is: lspci | grep VGA 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV620 [Mobility Radeon HD 3400 Series]

    Read the article

  • Group policy reset upon restart?

    - by sc_ray
    Is it possible for a group policy to revert back to its original state upon server restart? Our servers are hosted as a Virtual Machine on the rack. We had to restart our server for some reason and all of a sudden we cannot remote desktop into the server any more. Pinging the server succeeds but RDPing into it fails. My assumption is that the group policy has reverted back preventing any remote desktop connections from taking place. Is that a possibility? Since the network is managed by another group, we don't have the authority to physically look into what's going on with this particular VM. Can somebody suggest some ideas? Thanks

    Read the article

  • How to create a Service Connection Point for Exchange (Manually)

    - by Ionoxx
    I'm being cautious here. Before I remove anything I want to be able to put it back. I'm having issues with a domain joined computer that is using SCP to get exchange autodiscovery information. It's getting information for the now unused internal Exchange through SCP even through the profile is using Office 365 on another domain. According to this conversation, I can simply remove the object from Active Directory Sites and Services. I want to know how to add back in should this create more problems, or if we reinstate the Exchange server. Right clicking on the parent "autodiscover" node doesn't allow me to create a Service Connection Point. Will simply running the cmdlet "Set-ClientAccessServer -identity servername -AutodiscoverServiceInternalUri url" be enough to recreate the object? Thank you!

    Read the article

  • Multi-machine backup solutions

    - by Paul
    I have a growing number of PCs and laptops in my home that need a backup solution. My question is 2 fold: Most commercial backup vendors appear to license by the machine, are there any products that give a license that can be used on all your machines, without a per machine cost? An alternative is to have a centrally controlled back up strategy controlled from a single PC with an attached hard drive that can back up other machines on the network. What backup software is suitable for this approach? Will this software be windows/Linux interoperable? I've searched for duplicate questions but don't see anything that addresses the multi machine/cost issue. OSs in network will be Windows (XP, Vista, 7) and Linux variants. Not pattern to when machines will be switched on.

    Read the article

  • Hosting woes

    Unfortunately quite a few people have noticed our recent hosting problems, but if you are reading this they should all be over, so please accept our apologies. Our former web host decided migrate to a new platform, it had all sorts or great features, but on reflection hosting wasn’t one of them. We knew it was coming, and had even been proactive and requested several dates on their migration control panel so I could be around to check it afterwards. The dates came and went without anything happening, so we sat back and carried on on for a couple of months thinking they’d get back to us when they were ready. Then out of the blue I get an email saying it has happened! Now this is what I call timing, I had client work to complete, a 50 minute presentation to write and there was a little conference called SQLBits that I help organise at the end of the week, and then our hosting provider decides to migrate our sites. Unfortunately they only migrated parts of the sites, they forgot things like the database for SQLDTS. The database eventually appeared, but the data didn’t. Then the data pitched up but without the stored procedures. I was even asked if I could perform a backup and send it to them, as they were getting timeout errors. Never mind the issues of performing a native backup on a hosted server, whilst I could have done something, the question actually left me speechless. So you cannot access your own SQL server and you expect me to be able to help? This site was there, but hadn’t been set as an IIS application so all path references were wrong which meant no CSS and all the internal navigation and links were wrong. The new improved hosting platform Control Panel didn't appear to like setting applications. It said it would, you’d have to wait 2 hours of course, then just decided not to bother after all. So needless to say after a very successful SQLBits I focused my attention on finding a new web host, and here we are again. Sorry it took so long.

    Read the article

  • cd ~ dumps me in a seemingly empty directory

    - by Davidos
    This is on a Linux mint box. I'm told everywhere to use the command cd ~ To switch to the root directory before doing some command line magic. For some reason though, it dumps me in a directory named ~ where ls gives nothing and I can't get back to my home directory; I have to restart the terminal session to get out of the empty root directory. I'm positive that everything is just hidden to me, but even as a super-user I can't get the folders to show themselves. I usually just fall back to using a graphical file browser to roam those forbidden files, but I've recently just been shut out of my root directory, and the machine refuses to allow me to change the permissions on the stupid thing even when I type the root password in. It may just be some over-rigorous end-user shielding on the part of the mint team, but it's getting to be really frustrating now.

    Read the article

< Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146  | Next Page >