Search Results

Search found 29636 results on 1186 pages for 'fine uploader'.

Page 139/1186 | < Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146  | Next Page >

• Search inside of text files

  - by Matt

  So here is the situation. I currently run a mail server for my small non-profit company. My mail server (Merak Mail Server) keeps logs in .log files and mail as .tmp files. Essentially these are just text files that are kept on the server. Problem is that when I put text into the "Containing text" field on Windows Explorer, it always misses the files and tells me no results returned. Then when I search the files one by one (painful at best), I find the files I need. Do I not understand the search feature well enough, or maybe I have it indexing wrong. I really don't care what I need to use to search the files, even a third-party app is fine with me, I just want to type an email address into a box and search all of my log files or email files and find out which one I am looking for. It can be Windows Search or something else, as long as I can find a way to get the job done I will be happy. Pay solutions are fine as well. Thanks everyone in advance.

  Read the article

• Logitech QuickCam Pro 9000 & Windows 7 64-bit failing miserably

  - by Saxtus

  I am trying to install a Logitech QuickCam Pro 9000 webcam to Windows 7 64-bit. If I do it without using the Logitech drivers but instead the Windows Update ones, the camera works with low frame rate and without face tracking and all other bells and whistles that it's full driver provides. The moment I install the latest official Logitech driver, the problems begin: Camera works fine, until I decide to go to audio settings of the LWS panel or Windows'. Then LWS freezes and with it everything that tries to output audio. I am not able to open Playback/Recording devices window (it just doesn't appear) and system gets unstable and slow with LWS.EXE process not been able to close forcefully. If I reboot and forget the camera connected, this situation continues and system gets unstable from the beginning. If I reboot without the camera connected, everything works fine until I connect it and try to do something with audio settings of Windows or LWS panel. I should note, that until the freezing occurs, camera works as expected, with full frame rate, face tracking and everything that is expected to do. The soundcard is the ASUS SupremeFX II of the ASUS Striker II Extreme motherboard. Any ideas of what is causing this or what else to try so I can make it work as advertised? Thank you.

  Read the article

• Resuming downloads in Firefox

  - by Kim

  Unfortunately, Firefox still has failed to add the option to resume downloads. I've ran into this problem SO MANY times, and in my previous searches I found posts saying Firefox was going to fix that. As of 3.6.3 they haven't. I just tried Free Download Manager (FDM), again, having the Firefox addon Flashgot use it. The download gets passed to FDM, and fails, giving the error message "access denied, invalid username or password." No password was required. The site I'm trying to get the file from is turbobit.net, which limits downloads speeds to 100kb/sec, and has a 59 second countdown before you get the link. I guess it's transparently using a password on their end. If I just download normally (save to disk) the download starts fine, but it fails after 30 minutes to 1 hour (always different), and my Wi-fi connection will stop briefly - and I have to start all over. So I will never be able to download a large file. I also tried DTA instead of FMD with Flashgot, and I get an "access denied" message in DTA. Again, I reloaded - waited the 59 seconds, and download w/Firefox, and the download starts fine. The failure message in the Firefox Downloads window is "source file at http... could not be read." Any help would be greatly appreciated. When is Firefox going to finally add the ability to resume downloads????? Is there some other software I haven't found using Google that will work?

  Read the article

• .tex file remains in use by process when batch file is triggered by .Rnw Sweave processing.

  - by drknexus

  This is a pretty specialized question. I'm using the Eclipse IDE in a Windows XP environment with the StatET plug-in so I can write R code as an R/Sweave document. This produces a .tex file that is then post processed by pdflatex.exe. When I create the file as normal everything works great (except maybe my file named russfnc2.Rnw seems to result in russfnc.pdf even though pdflatex.exe on the console window correctly says that the output is being writen to russfnc2.pdf). The big problem is when I trigger a batch file from within my Rnw code. My goal here is to spawn a side process that waits for the PDF to be made and uploads it to the server. So the Rnw contains: if(file.exists("rsp.finalize.bat")) {system("rsp.finalize.bat",wait=FALSE,invisible=FALSE)} The batch file calls Rterm.exe to run a script: setwd("C:/theprojectdirectory") while(!file.exists("russfnc.pdf")) { Sys.sleep(1) } Sys.sleep(60) At the end of that script, I use a shell call to launch psftp.exe and upload the files. All of this works fine, when I use my Eclipse profile to trigger Sweave... that is unless I have that batch file at the end of the .Rnw. When it is located there, I get the error message pdflatex.exe: Permission denied: c:\thepath\thetexfile.tex. After that, the .tex file (as far as XP is concerned) is in use by another process and I have to reboot in order to delete it (and, of course, the pdf is not made). If I manually trigger the batch file after pdflatex.exe has done its things, everything works fine. How can I make this work correctly using the tools I'm familiar with vis., R and Dos-style batch files? I'm not sure if this is a SuperUser question or a StackOverflow question, so I'm starting here.

  Read the article

• Problem with network after malware attack

  - by Cruelio

  Im trying to help some friends with a Win XP machine. I got rid of the malware using Malware Bytes, and HiJackThis. But now they(I) have another problem. When the computer boot into Windows it seems fine. When I start Internet Explorer the browser window opens just fine, but nothing happens for at minute or two. After the two minutes of waiting, the network icon appears in the taskbar next to the clock, and then everything works. The computer is connected to the internet using a Ethernet adapter. I have looked at the Rvent Log and found an error from Perfnet with eventid 2004 <Provider Name="PerfNet" /> <EventID Qualifiers="49152">2004</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> What I have tried so far: In the device manager i have uninstalled the Ethernet adapter and installed it again. I have uninstalled and installed the Windows File and Printer Sharing service. I have verified that both server and workstation services are started. What should I do next?

  Read the article

• SSL timeout on some sites, across all browsers, on Mac OS X Snow Leopard

  - by dansays

  For the past several weeks, I've been receiving "Error 7 (net::ERR_TIMED_OUT): The operation timed out" when I attempt to connect to either Twitter or Paypal via SSL. I get this specific error in Google Chrome, but the same problem occurs in both Safari and Firefox. Other sites work fine, and other computers on my network can access these two sites. I have no firewall settings that would prevent me from accessing these sites over port 443. I notice that both Twitter and Paypal both have "Verisign Class 3 Extended Validation SSL CA" certificates. It is unclear whether this is related to the problem. In an effort to troubleshoot, I attempted to open the test sites referenced on Verisign's root certificate support page, which worked fine. Just to be sure, I downloaded and installed the root package file and installed all included Verisign certificates. No joy. I feel like I've hit a dead end. Any ideas? Update the first: I also cannot connect to FedEx.com, who also has a Verisign Class 3 Extended Validation cert. Update the second: Aaaaaaand it fixed itself. I did nothing. Or, I did something that worked, but in a delayed fashion. Frustrating, but a win is a win. I'll take it.

  Read the article

• Configure IIS to pass-through CGI output without any conditioning

  - by Daniel Watrous

  I'm building a web service on Windows 2008 R2 with IIS 7.5 and Python 2.5. Right now I have the Handler Mappings and everything else setup just fine, Except that IIS is modifying what it gets back from the CGI script before sending it along the the client. Here's an example: I wrote the following CGI script: # hello.py print "Status: 400 Bad Request" print "Content-Type: text/html" print print "Error Message" According to the HTTP spec this should be fine and a Status of 400 should allow for a description of the error message in the body of the response. When the server response actually comes back to me I get the following: Status: 400 Bad Request Date: Fri, 11 Feb 2011 17:58:30 GMT X-Powered-By: ASP.NET Connection: close Content-Length: 11 Server: Microsoft-IIS/7.5 Content-Type: text/html Bad Request I've seen on this forum and others where I can change or eliminate the X-Powered-By header element, but I would like IIS to leave it alone altogether. I'm not sure why it takes my response, deletes "Error Message" from the body and replaces it with "Bad Request" and then adds all that other junk in. Is there some way to tell IIS to just send the response along without making any changes at all?

  Read the article

• Slow Local Network, Windows 7, Snow Leopard, WiFi/Wired

  - by WerkkreW

  Hello - I am experiencing really poor local network performance in my home. I was recently using a Linksys WRT54G Router with DD-WRT on it, and a couple comparable Linksys-G PCI cards for connectivity but decided to upgrade hoping it would help with my performance issues. The computers in my house are connected as follows: Comcast Business Class Commercial 25mbps/10mbps (Verified with SpeakEasy and Speedtest.net) D-Link DGL-4500 Wireless N Router Windows 7x64 - D-Link DWA-552 Wireless-N Windows 7x64 - D-Link DWA-552 Wireless-N Mac Mini 10.6.2 - AirPort Extreme N Playstation 3, Hard Wired Xbox 360, Hard Wired Essentially the problem is very specific. Web browsing and uploading/downloading files from the internet is fine, more than fine. But if I want to say, Stream a video from one of my Windows 7 computers to my PS3, or copy a large video file between either of the PC's or the Mac, I get a consistent 500-900Kbps throughput at the high end. If I open my network browser, or try to browse my homegroup the response time is horrible. Both of my Windows computers are showing Strong wireless signals with a connection speed of 300Mbps. I know I can never expect to achieve anything near those speeds, but 500Kbps? Here is what I have tried so far: Enabled Single mode N-only and N/G Only on router WPA2 with AES Encrpytion Disabled "Remote Differential Compression" in Windows 7 Disabled TCP "Auto-Tuning" Used other software for file copies such as "Teracopy" I am at the end of my rope. Unfortunately I live in a 75 year old home with plaster walls, so hard-wiring my entire house isn't really an option I can handle right now. Any ideas to help me get decent speed when transferring files across my network would be greatly appreciated.

  Read the article

• Can't get past bootcamp Windows logo, freezes immediately after picking boot partition -- Windows 7

  - by cksubs

  Hi, I had a fine install of Windows 7 alongside Snow Leopard. I had a power outage, and Windows restarted. When I booted via the "Hold Option" sceen, it started hanging at the grayscale "Windows logo" (squares) that comes up after picking the Windows drive from the bootcamp loader (the Windows version of the grayscale Apple logo when OS X loads). I think this happened once before, and installing rEFIt helped. I did that, but it continued to hang at the same point. I finally got fed up with it and erased the Windows partition via Disk Utility. I then reinstalled Windows 7 x64 from DVD to the fresh partition. Seemed fine. Ran Windows Update then restarted. FFFFFFFFF. Hangs in the same place. What can I do? Like I said, I already have rEFIt installed. Booting the Windows 7 install CD results in the same infinite loading error. I don't have a spare Snow Leopard disk handy.

  Read the article

• Windows 7 boot problem on a Lenovo Thinkpad Z61m 9450HAG

  - by Matt Taylor

  I recently did a full upgrade of Windows 7 on my Thinkpad. Everything worked fine after up until the second reboot (the first reboot after some updates installed worked OK). At second reboot time the system would just black screen before the Windows logo appears. Disk/wireless/power/battery lights are all lit and the disk light is active (flickering). However, if I remove my battery and boot with just power it boots fine and quickly, and everything is OK. Any help on why this won't boot with battery plugged in is greatly appreciated. I need to take this battery out on the road/trains, etc. A little more detail on this story. The battery I had inserted when doing the (failed) boot was a long life battery. I have not tried inserting this battery when Windows is logged in. I have another (normal life) battery that I have charged up within Windows. It has just got to 100% and I am about to reboot with it in. I am using the Lenovo power manager to diagnose the battery - all seems OK. I will report back shortly as to the outcome. OK, so I chose the reboot option from within Windows, the machine seemed to shutdown okay, but then stalled. It didn't turn off completely and didn't reboot, but just sat, with the fan humming, somewhere in between! I had to hold the power button in for a few seconds until the fan stopped and then hit the power button again to boot the machine from fresh. One good thing, with this battery (the normal one) it booted into Windows 7 the first time with a battery! So, now I have rebooting issues. I have 3 errors in the event log: A timeout was reached (30000 milliseconds) while waiting for the lxdxCATSCustConnectService service to connect. The lxdxCATSCustConnectService service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion. The following boot-start or system-start driver(s) failed to load: cdrom Any thoughts?

  Read the article

• Linux: can't downgrade ATI graphic driver

  - by java.is.for.desktop

  I had the old 10.9 driver of ATI, it worked fine. Sadly, I decided to upgrade it to the new 10.12. After that, HDMI stopped working. So, I want to downgrade back to 10.9. I did everything by the book. But it fails: As root, I do: cd /usr/share/ati sh ./fglrx-uninstall.sh Yes, the uninstall process tells me that everything is fine uninstalled. And after doing reboot, I have the default opensource ATI driver which comes with X11 (or the kernel?). The ATI control panel shortcut points to nowhere. So, the driver seems uninstalled. Now I install the older (10.9) proprietary ATI driver. It also finishes successfully. But after reboot, the ATI control panel tells me that I still have 10.12. And it seems to be true, because HDMI doesn't work. So, how can I completely purge the new non-working driver and downgrade to the old one?

  Read the article

• Windows 7, Printer is unavailable until PC reboot

  - by Cjs

  We are having a problem that I haven't seen before and can find no answers to online. A desktop running Windows 7 is unable to print using network printers. When the user tries, no matter what printer it is, he get's the following message when using Microsoft Office applications: "Current printer is unavailable. Select another printer." When the end user uses Outlook we get the message: "Printing is not available. There are no printers installed. You can select and configure a printer in Windows Control Panel." Now here is the confusing part, if we reboot the pc it works fine for a little while and then goes back to the same old same old. The printers are working fine for every other user as well so I believe it is the user's machine. If anyone has any ideas please let me know. Edit: I'd like to add in that some people were having luck disabling snmp for the printers. Restarting the print spooler doesn't seem to do anything.

  Read the article

• How do I keep a bridge enabled on a bonded interface?

  - by jlawer

  I'm working on setting up a pair of CentOS 6.3 servers that will run a couple of KVM vms and have come across a problem setting up a bridge on a bond. I am using Mode 4 (802.3ad) bonding on a pair of stacked Dell Powerconnect 5524 switches connecting to R320 servers. There are 2 links (1 to each switch) that form a Link Aggregation Group (802.3ad / LACP bonding). On top of the bond I have VLAN Tagging. I've verified this is a problem on multiple other bonding modes so it isn't just a mode 4 issue. I am testing what happens when 1 link is dropped (ie switch dies, cable breaks, etc). If I don't have a bridge (for KVM), everything works fine, failover happens as expected. If I have the bridge enabled, it works fine until failover (unplugging a cable). When failover happens /var/log/messages shows the slave link going down, followed within a second by: kernel: br1: port 1(bond0.8) entering disabled state The thing is /proc/net/bonding/bond0 shows the link is up as expected (simply with only 1 slave instead of 2). If I plug the cable back in it recovers and brings the bridge back to an enabled state. I actually have tested this while a ping is occuring and if the timing is right a packet will actually leave the system after the link is lost, but before the disabled message occurs. This disabled state I assumed was STP, but I have disabled STP on the bridge configuration and this issue still occurs. brctl showstp br1 still shows the link as disabled when it is running without a slave. I also switched between the nics in the server (I have 2x Broadcom & 4x intel). It doesn't matter which configuration I have. Does anyone know of a way to force the bridge to stay enabled or why its detecting the bond as disabled, when it isn't?

  Read the article

• Internet Troubles - PPPoE vs PPPoA?

  - by AkkA

  I have been having some internet troubles at home (ADSL2+ connection in Australia). We get random drop-outs from the authentication connection. It will keep the connection to the DSL service, but we lose authentication and either have to restart the router/modem (its combined, a Belkin one, not sure on model number) or unplug the phone cable, wait about 30 seconds and plug it in again. I've called the ISP (Telstra) a few times, but they only offer limited support when we dont use their supported hardware. Apparently something had happened on their side, they checked the box again (at least it sounded that simple), and told me it would be fine. It wasnt. I've replaced all the filters around the house, but that didnt help either. We do live a little bit away from the exchange (get a sync speed of about 3000/900), so I thought it could be due to line noise but that hasnt helped. Telstra allow both PPPoE and PPPoA connections (which I'm configuring through my router, dont have software on the PC side). I've been running PPPoA the whole time, would it make any difference changing it to PPPoE? If not, are there any other theories as to why we would be experiencing these drop-outs? It has been fine for at least 12 months, then suddenly started about 2 months ago.

  Read the article

• erlyvideo server doesn't start automatically after reboot

  - by electroid

  I have installed erlyvideo server on ubuntu 9.10 karmic koala. Everything works fine, but after server reboot I have to start erlyvideo server manually with /etc/init.d/erlyvideo start. I try allready update-rc.d and I think erlyvideo by default should start automaticaly. Any help will be appreciated. Here erlyvideo startup script located in /etc/init.d/erlyvideo: #!/bin/sh ### BEGIN INIT INFO # Provides: erlyvideo # Required-Start: $local_fs $network # Required-Stop: $local_fs $network # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: starts the erlyvideo streaming server # Description: starts the erlyvideo using erlang system ### END INIT INFO case "$1" in start) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; stop) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; restart) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; soft-restart) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; upgrade) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; reconfigure) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; reboot) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; ping) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; console) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; attach) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; attach-erl) cd /opt/erlyvideo && ./erts-5.8.4/bin/erl -name [email protected] -remsh [email protected] ;; *) echo $"Usage: $0 {start|stop|restart|soft-restart|upgrade|reboot|ping|console|attach}" exit 1 esac exit 0 And I have found S91erlyvideo in /etc/rc2.d next to S91apache2 which starts just fine on every reboot.

  Read the article

• Reconfiguring PHP with OpenSSL Extension on CentOS

  - by Evan

  Hi Guys - Long time browser, first time poster! I have a CentOS Dedicated server running just fine. I'm trying to reconfigure PHP to include the OpenSSL extensions so I can use some of the Youtube API's. I installed OpenSSL with yum, so it's in place on the server. I'm just now having trouble getting PHP to use it as an extension. I got the latest PHP tarball, untarred, set my configure string (./configure) using the proper parameter for openssl (--with-openssl=/usr) and it checked out just fine. I ran Make, then Make Install. I am getting hung up here. After it makes the PEAR config file it seems to quit. I guess I'm not sure, but it seems like there is a LOT more that should be happening. Here is a screenshot: http://www.evanfell.com/screencaps/6iamks.png Restarting apache shows no change to the PHP running on the server. Is there are PEAR issue killing the Install process? Or is there an other issue? Thanks In Advance. Happy to clarify and provide more info.

  Read the article

• How can I batch convert SVG files containing text to PDF files (specifically on CentOS 5.3 x86_64)?

  - by molecules

  I would like to programatically convert SVG files to PDF files. However, the SVG files contain text that must be searchable in the generated PDF files. Also, it has to work on Red Hat Enterprise Linux 5.3 or CentOS 5.3 for the x86_64 architecture. It would be nice if it were Open Source or at least not very expensive. Here is what I've tried. All of these, except Batik, work fine on Debian Lenny. Inkscape I can get it installed using autopackages from http://inkscape.modevia.com/ap, but when I use it from the command line, the text is not searchable. Batik rasterizer [sic] When it converts SVG files to PDF files, the text is no longer searchable. svg2pdf The source for this and several of its dependencies are available to download. I have been trying to get it to compile on CentOS, but haven't had success yet. I found a precompiled version for Debian x86_64, but it doesn't work on CentOS. rsvg-convert Generated PDF isn't searchable on CentOS 5.3. Perhaps installing a newer version of cairo would help. Thanks to DaveParillo for mentioning rsvg-convert (on superuser). SOLUTION (but perhaps some of the above will still be useful to the reader) princeXML It works fine on CentOS when installed from source. For some reason it doesn't work when installed from the .rpm. Thanks Erik Dahlström! (provided solution that worked for my case on stackoverflow) Cross posted on stackoverflow

  Read the article

• Correct MySQL username/password, but getting Access Denied error when run from script

  - by Nick

  I'm currently trying to run the following command from within a shell script. /usr/bin/mysql -u username -ppassword -h localhost database It works perfectly fine when executed manually, and not from within a script. When I try to execute a script that contains that command, I get the following error: ERROR 1045 (28000) at line 3: Access denied for user 'username'@'localhost' (using password: YES) I literally copied and pasted the working command into the script. Why the error? As a sidenote: the ultimate intent is to run the script with cron. EDIT: Here is a stripped down version of my script that I'm trying to run. You can ignore most of it up until the point where it connects to MySQL around line 19. #!/bin/sh #Run download script to download product data cd /home/dir/Scripts/Linux /bin/sh script1.sh #Run import script to import product data to MySQL cd /home/dir/Mysql /bin/sh script2.sh #Download inventory stats spreadsheet and rename it cd /home/dir /usr/bin/wget http://www.url.com/file1.txt mv file1.txt sheet1.csv #Remove existing export spreadsheet rm /tmp/sheet2.csv #Run MySQL queries in "here document" format /usr/bin/mysql -u username -ppassword -h localhost database << EOF --Drop old inventory stats table truncate table table_name1; --Load new inventory stats into table Load data local infile '/home/dir/sheet1.csv' into table table_name1 fields terminated by ',' optionally enclosed by '"' lines terminated by '\r\n'; --MySQL queries to combine product data and inventory stats here --Export combined data in spreadsheet format group by p.value into outfile '/tmp/sheet2.csv' fields terminated by ',' optionally enclosed by '"' lines terminated by '\r\n'; EOF EDIT 2: After some more testing, the issue is with the << EOF that is at the end of the command. This is there for the "here document". When removed, the command works fine. The problem is that I need << EOF there so that the MySQL queries will run.

  Read the article

• Time-Machine backup over SSH tunnel to NFS mount

  - by BTZ

  I've recently started using a new NAS which runs CentOS 6.2. One of the purposes of the NAS would be to serve as a backup target. Whilst I have been using Apple's Time-Machine for a while and I am very satisfied with it, I'd like to continue using it. Backing up directly to an address in my network is no hassle; all works fine. For security reasons I'd like all my traffic to go through an ssh tunnel to the NAS. This way I can avoid needing to get a VPNserver (for personal reasons). As of NFSv4 the NFS deamon is bound to port 2049, which makes it easy for me to direct all traffic through a ssh tunnel. Tunnel: ssh -f admin@ms -L 2000:localhost:2049 -N Mount: mount -t nfs -o nfsvers=4,rw,proto=tcp,sync,intr,hard,timeo=600,retrans=10,wsize=32768,rsize=32768,port=2000 localhost:/mac_backup /Volumes/backup This works fine for Finder/terminal and throughput is almost equal to direct traffic. (CPU of the NAS does ride high when I reach max bandwidth though) Now the problem: With Time-Machine I can't use the NFS mount point mounted on localhost. TM seems to try to connect to it and then give me a "OSStatus error 65". I also tried using NFSv3 (I correctly forwarded all ports) with no luck. Can anyone shed a light on this and/or give a solution?

  Read the article

• Host name change breaking http? Fedora

  - by Dave

  OK so I have been messing around on my development server. It has been a while since I have had my head in linux and I suspect I have broken something. I have SSH running and that is working fine. I also have HTTP and I had FTP running also. Earlier today I decided I wanted to rename the machine so I updated the /etc/hosts file and /etc/sysconfig/network. I also changed the server name in the httpd.conf. I rebooted the machine and reconnected to SSH fine. Later I was messing around with the FTP service (trying to tighten up the user security) and when i tried to connect remotely to FTP no joy, it said cannot connect. I thought that was weird but had planned to remove ftp as we will be using github so removed ftp and moved on. Then I tried to connect to the website but major fail. even connecting to the IP address is failing. I used lynx to connect to the localhost and there was my site so something going on at server level. I thought maybe something up with iptables but I have not changed them but tried adding http but still no joy. I have a - Fedora release 17 (Beefy Miracle) NAME=Fedora VERSION="17 (Beefy Miracle)" ID=fedora VERSION_ID=17 PRETTY_NAME="Fedora 17 (Beefy Miracle)" ANSI_COLOR="0;34" CPE_NAME="cpe:/o:fedoraproject:fedora:17" Fedora release 17 (Beefy Miracle) Fedora release 17 (Beefy Miracle) Linux version 3.3.4-5.fc17.x86_64 ([email protected]) (gcc version 4.7.0 20120504 (Red Hat 4.7.0-4) (GCC) ) #1 SMP Mon May 7 17:29:34 UTC 2012 This is my iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT icmp -- anywhere anywhere ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh REJECT all -- anywhere anywhere reject-with icmp-host-prohibited Chain FORWARD (policy ACCEPT) target prot opt source destination REJECT all -- anywhere anywhere reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT) target prot opt source destination Like I say I can use SSH no issue but http although running is a no go from a remote computer. Any ideas?

  Read the article

• Understanding how IE's SmartScreen works

  - by Kevin Donn

  Today I downloaded an update to our mail server on my dev machine using IE9 on Win7 Pro. I directed IE to save the file on our server's shared drive so I could install it later. When the download finished, IE showed a red banner at the bottom and said that, ".exe is not commonly downloaded and could harm your computer." There were three buttons, "Delete", "Actions", and "View downloads". I selected "Actions" just because I had never seen this before. It showed a "SmartScreen Filter" dialog basically giving three choices: "Don't run this program (recommended)", "Delete program", and "Run anyway". I just canceled the dialog because I didn't want to run it in the first place; I just wanted to download it so I could run it later on the server. So when I did try to run it, it would blow up immediately saying, "Setup was unable to create the directory - Error 5: Access is denied." I tried unblocking the file, "Run as Administrator" even though I already was Administrator, turning off UAC, etc. Cutting to the chase, I finally downloaded the file again, ran WinMerge on the two and it showed they were identical, except the new one ran fine. I went back to my dev machine, downloaded the file through Firefox and then ran it on the server, again fine. But when I tried again through IE, again SmartScreen showed its red banner and somehow clobbered the file even though it was stored on another machine, and WinMerge can't tell the difference between it and a good file. I've looked around on the web for how SmartScreen works, but they all give user-level descriptions of it. What I want to know is, what does it do to that file to make it unrunnable on another machine? Thanks

  Read the article

• When machine is turned on, only the fan runs

  - by Gopal

  Hi, I have an issue slightly similar to this one posted here, http://superuser.com/questions/127016/troubleshooting-monitor-never-turns-on-system-fans-running-dvd-rom-does-not-op My configuration is as follows: EPOX 9NPA+ Ultra motherboard AMD Athlon 64 CPU Corsair 2 x 1GB PC3200 DDR RAM 1 DVD RW drive and 1 CD ROM Drive SATA 250 GB Hard drive 400W Power supply EVGA 256MB graphics card I have had this configuration for about four years. Last month, I started having issues in starting the machine. It wouldn't start when I press the ON button in the front of the case. So I used to pull out the power cord and plug it back in and then switch on in the front, and it used to work fine. And then one fine day, when I plugged in the power cord at the back, even without switching on the power-on button at the front, I saw that the fan at the back was running. So I opened the system. Then I could see that all the fans inside were running. I replaced the power supply. No luck there. Then I replaced the CMOS battery. Again nothing improved. Even when I removed all the cards and memory, I still get one short beep. That's it. Any idea how to proceed on this? Anything else could be checked? I want to confirm if this is a motherboard failure, before proceeding to replace it.

  Read the article

• Why does Windows Firewall want to block Google Chrome today?

  - by hippietrail

  I've been using the same public Wi-Fi (staying in a guesthouse) for over a week now. But this morning for the first time I got this puzzling warning from Windows Firewall: Why does Windows Firewall want to block one of the world's most popular web browsers today after being fine with it for years, and being fine with it on this connection for a week? Could it hinge on the words, some features? If so could it be something like a rare or new feature of Chrome that uses a different HTTP port? And if so why doesn't the security alert tell me any more about it? Or could it be a known bug in Windows Firewall? Or perhaps a known virus etc attaching itself to Google Chrome? Or is there a chance it's related to "Other browser makers follow Google's lead, revoke rogue certificates"? I haven't restarted Chrome for days and have downloaded but not installed a Windows update from a few days ago. So I'm not sure what may have managed to change on my machine since yesterday.

  Read the article

• ESXi 5 Guests will not boot

  - by Adrian

  I have a problem with Guests not booting under VMWare ESXi 5.0 on my IBM x3550M3 server. Note: Investigation eventually determined that problem was with the VMware client on a Lenovo Edge laptop, the only Windows box available in a Linux IT shop. vSphere Client v4 and v5 duplicated behavior on the Lenovo Edge. As indicated in the comment to the accepted answer, replacing the workstation with one using different video was the "fix" for this particular issue. The ESXi host boots just fine. The Client connects just fine. Guests can be configured but do not successfully boot. The initial guest memory consumption jumps up to 560MB and drops down to 40MB after a few seconds. Initial CPU usage is 1 full CPU (3000Ghz per the chart) and immediately drops downm to 29Mhz. Guests do not display any output in the Console tab but show a state of 'Powered On'. No errors in the Events tab. Switching Guest from BIOS to EFI makes no difference. VMs are listed as Version 7 and the behavior is duplicated across all availabled Guest OS flavors. Problem also duplicated when server is booted up in Legacy Only mode. Logs do not contain anything particularly suspicious. Edit: No firewalls, routers, or VLANs in between the client and server. Edit 2: We have tried to Boot Guest into BIOS screen at Next Boot checkbox in the Guest Setting. Was not successful. Edit 3: 500GB datastore with 1 40GB VM on it. Plenty of space. Edit 4: Guests copied from my old ESXi 4 server DO NOT boot on the ESXi 5 system. Initially it complains about too little Video RAM being configured for the default 2500x1600, but it still doesn't work properly even after I bump the Video RAM settings or switch it to Auto-Detect.

  Read the article

• Possible boot conflict?

  - by Evan Kroske

  I was installing Ubuntu on a computer on which Windows XP was already installed. The computer has multiple hard drive bays, so I decided to remove the XP HDD and install Ubuntu on a blank HDD when it was the only HDD in the system. Unfortunately, if I now try to boot Ubuntu with the Windows XP drive in the second slot, nothing will boot. However, if Windows XP is in the first slot, it will boot fine. Can anybody explain why this happens? When I was checking out the BIOS to see if something was messed up, I discovered that when Ubuntu is in the first slot, the BIOS doesn't recognize any HDDs. However, if XP is in the first slot, the BIOS recognizes both drives. Any hypotheses about why this happens? Edit: Here's the setup. I have an old server with seven SCSI HDD slots. I have five identical 68 Gb SCSI drives, but I can keep only two plugged in. XP is still installed on the first drive, but I reinstalled Ubuntu on the second drive and had Grub overwrite the XP bootloader on the first drive. Now, the setup works fine, and I can use Grub to load either XP or Ubuntu. However, if I plug in another identical blank HDD in the third slot, the computer recognizes only the XP drive and doesn't boot. Grub starts to load, then gives me a "disk not found" error. Running ls from the grub rescue prompt only shows one drive with two partitions. I guess this is a BIOS problem, but I'd still like to know what triggers it. What about a blank drive could cause the BIOS to freak out?

  Read the article

< Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146  | Next Page >