Search Results

Search found 5670 results on 227 pages for 'zend router'.

Page 139/227 | < Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146  | Next Page >

• Can't connect to the internet in Windows Vista

  - by Kola

  I have a Windows Vista computer which i have used for about 2 years without any issues. Recently, i started having problems connecting to the internet with this Vista computer. My other XP Computers are fine and can connect to the Internet. Regardless of wired or wireless connection, i am unable to get the Vista computer connected to the web. The Status remains "Limited" for IPv4 and IPv6. It also shows unidentified Public Network, and is able to connect to the router. However, there's a disconnection between the router and the internet. Any help will be greatly appreciated, i have been on this for 4 weeks now.

  Read the article

• Jumbo Frames on DIR-655

  - by Spookyone

  I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU Synology DS107+, Firmware 3.0-1337 Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

  Read the article

• Wifi and eth behavior

  - by r00ster

  I have a wireless router 150M Wireless Lite N Router Model No. TL-WR740N / TL-WR740ND. Normally, when I'm connected to the local network using eth0 I can ping other machines by issuing ping name. When I'm connected through wifi I have to issue ping name.domain.com. The machine is only visible in intranet. How to achieve the same behavior with wifi? The second problem is, that I can not connect to some external sites through wifi but through eth everything is ok. I guess that is related to some port forwarding, but I'm not sure. How can I resolve this issue? EDIT: I'm using Linux Mint.

  Read the article

• How Do I Enable CUPS Browsing Across A Network?

  - by David Mackintosh

  I have a CUPS server with two print queues defined. Once this was defined, all the CUPS clients on the same subnet could see the two print queues automatically, no problem. Now I have a collection of machines on a separate subnet, reachable from the first subnet by a router. How do I enable CUPS browsing on the second set of machines so that they can see the print queues defined on the first machine? Let's call the server A.B.C.7. The first subnet is A.B.C.0/24. The second subnet is A.B.D.0/24, and there is a router with arms on both networks.

  Read the article

• How can I make my Ubuntu server accessible to the internet ?

  - by wahid

  Hi, I already installed applications to make my server web server. when I type the DHCP released ip address in the web browser, i can access it but all it says is "it works....etc". I can copy files to /var/www successfuly using WINSCP but yet, i can not see any files when I connect to it using my windows machine in the browser. Secondly , I tried to forward port on my home SMC router, it only accepts local lan ip which my ubuntu server picks up internet ip from router...what should i do ? can you help please ???? Thanks,

  Read the article

• Can I mix CAT5 and CAT6?

  - by Jason94

  I'm thinking of upgrading the "backbone" of my network, taking a CAT6 cable from my router (DLINK DIR-655 (has cat6 ports)) to a gigabit swith in the tv rom (25m). I have two devices there that uses network (xbox and tvbox, both of them have cat5). Will my net be downgraded to 100mbit as max speed, or will I get 1 gigabit between my router and switch, and 100mbit between tvbox and xbox? From back in the days i have a tool to create my cat5 cable (the plug tool thingy), can I use this for my cat6 too?

  Read the article

• WDS (Wireless Distribution System) not work

  - by xdevel2000

  I've a dlink di-524 as main router (192.168.0.1) connected to Internet and a second router (192.168.0.2), a tplink wr841n, with WDS enabled and correctly configured to "join" with dlink. After I connect via wireless a laptop (192.168.0.100) to tplink and both work good but with the laptop I can't go to Internet. It seems as WDS not work. With the laptop I can only ping the tplink but other ping (the dlink or other LAN computer not responding). What's the problem? Perhaps also the dlink must have the WDS option? Thanks.

  Read the article

• Linksys Wireless-N ADSL2 WAG160N losing connection

  - by Sam1973

  It seems that recently I have to turn off and then turn on my router every time I want to connect my laptop(s) to the internet. This is what's happens: When I want to connect to the internet on my laptop, the network icon in the system tray states that I am connected to the wireless network but there's no "internet connectivity" I turn off the router and turn it back on and then I can connect to the internet. I am sure there is something that needs to be done. Can you guys point me to the right direction?

  Read the article

• How to uploads to the web work on local networks

  - by Saif Bechan

  Let's say I have two computers hooked up as a home network. They both use the same router, and the router is hooked up to the to the net. Now lets say I am working on computer A, and I can access files on computer B. Computer A has a drive that is mounted on computer A as a network drive. Now I want to upload a file to a website. In the browser of computer A I open a browser, and go the website. On the website I select 'upload file', now in the file browser I go to the network drive, and select a file on computer B to upload. What happens in this case. Is the file uploaded directly from computer B to the website, or is the file first transferred to computer A, and then to the website.

  Read the article

• WDS (Wireless Distribution System) not work [migrated]

  - by xdevel2000

  I've a dlink di-524 as main router (192.168.0.1) connected to Internet and a second router (192.168.0.2), a tplink wr841n, with WDS enabled and correctly configured to "join" with dlink. After I connect via wireless a laptop (192.168.0.100) to tplink and both work good but with the laptop I can't go to Internet. It seems as WDS not work. With the laptop I can only ping the tplink but other ping (the dlink or other LAN computer not responding). What's the problem? Perhaps also the dlink must have the WDS option? Thanks.

  Read the article

• wireless dropping out

  - by Sam

  My wireless network connection is dropping out and its driving me nuts. It is weird because it happens at totally random intervals and other devices work while my computer has been dropped. Both my USB dongle and wifi card randomly disconnect from the router and I am unable to connect for a couple of minutes. It is especially irritating because two different adapters are failing at the same time, sounds like a software problem to me, but where? Both my laptop and iPod remain connected when the connection drops. What on earth is happening? I doubt its the router because the other devices would disconnect as well.

  Read the article

• Asus RT-N66U forgets USB-Printer

  - by heysamhey

  about a week ago I bought the new Asus RT-N66U as the new Router in our little company. There are about 5 clients and 2 printers. There's a USB-only printer as well, therefor we bougth a router with USB-printer sharing. The setup and everything works smooth, but then after one day, and I still haven't found out why, suddenly the printer dosen't show up in the list of connected devices in the routers webinterface anymore. Of course I loose the possibility of printig, even though the printer shows up as "online" in the system settings. Can anybody guess the reason for this problem? Thank you very much

  Read the article

• What do user accounts do?

  - by Fasih Khatib

  Ok, this is my first time with windows server os. I started doing this out of curiosity. I have a desktop running windows server os 2003 which is connected to a wifi router. I have a laptop that connects to this router wirelessly and THIS REPRESENTS A REMOTE USER. I want to provide access to this user to a set of files ON THE SERVER. So i create an account for this user, as Start - programs - admin tools -user manager and then the steps to create an account. When i use this laptop, i log in as administrator as its the default account that came. Now when i want this laptop to be the user i just created on the server, HOW DO I DO THAT?

  Read the article

• How can HAProxy improve availibility, or "how can I prevent my site from going down"? [closed]

  - by Joe Hopfgartner

  I am aware of what HAProxy does, but what if my HAproxy goes down? Or what if my DNS servers go down? Yes, dns is less the problem. However dns only solves to an IP and an IP is announced via BGP to be routed over some router. What if that router goes down? Of course if I have complicated application servers that are likely to fail HAProxy can significantly improve uptime. But my application isnt. In fact my application may very well just be delivering a small static html file via HTTP. Basically if any user anywhere types in MYDOMAIN.COM, I want the user to get SOMETHING on the screen other than a timeout or DNS resolution error. How can I do that? The point of entry is difficult. The so called "initial closure mechanism".

  Read the article

• How to host ASP.NET application externally?

  - by Josh

  I have an ASP.NET application that I can get to locally by going to 192.168.1.102:81/TestApp. I would like to host the application externally by going to domain.com:81/TestApp (I already have my domain pointing to my router and this works fine - I have apache running on port 80 on another server). I modified the router settings to point any request coming through port 81 to 192.168.1.102. I am still having trouble accessing the ASP.NET site (I get the error message that "This link appears to be broken"). Am I missing something? How can I redirect domain.com:81/TestApp to my ASP.NET application? Thanks.

  Read the article

• Windows Internet Connection sharing with Mobile Broadband

  - by PaoloFCantoni

  Due to circumstances, I have only got mobile broadband where I am living. I have a small network with a ADSL Router (but which isn't connected to the Internet. I want to use ICS to allow one machine (with the MBB modem) to act as the Internet interface and allow other machines connected to the ADSL router (including a new Android tablet by WiFi) to use the single mobile broadband connection. I've a feeling that my configuration is not valid - as it stands, but I'm not sure. Can some kind soul lead me "by the nose" to getting this working? FWIW The mahcines are all running Windows 7 TIA, Paolo

  Read the article

• DD-WRT with both https and sshd running in port 443

  - by Bruno

  I have a buffalo router with dd-wrt v24 SP2. After setting up the basic stuff, I enabled the https access to the admin page. Several days later, while setting up remote ssh, I changed the default port from 22 to 443. And now..well :) You got the picture :) I can ssh the router but I have no web access to it's admin page. Before rushing to a cold-hearted configuration reset, is there any way to change the ssh port from a shell? Or make dd-wrt accessible thru basic http?

  Read the article

• how to set up domain name, bad request invalid hostname

  - by user45645

  assume i have a domain name which will be forwarded to my public ip (web server) automatically. in IIS 6, ip is public ip port is 6666, advanced - host value is www.hello.com firewall is open for 6666(web server port) and 53(DNS port), DMZ of router is my physical address in DNS, i have already had a zone called oldhello.com. And i expect a new domain name. So i have addded a new zone called hello.com and checked SOA server (P) is one.hello.local. then added a new host called one, full name is one.hello.com, ip address 192.168.7.3(my address in router) and then add a alias(CNAME) www, full name is www.hello.com, FQDN i choose the host i added before (one.hello.com) i expected that when i type the public ip in browser, can it be changed to domain name automatically. if not set host value www.hello.com, use public ip i can see the web however, after set up host value www.hello.com, browser show bad request invalid hostname

  Read the article

• What to do if people can't ping me?

  - by slayerIQ

  Today, I installed my new router so I can connect my other pc and my ps3. In my network, there are some other computers these are connected with each other through another router. So I have one modem with 2 routers that make up my network. Everything works fine the only problem I am having is being pinged by other computers in the network. All the computers are on the same subnet 255.255.255.0. There is no problem with my firewall or anything I tested everything. How can I solve this?

  Read the article

• Is A Managed Switch With VLAN Support Required

  - by Justin

  Hello, I am wondering if I need to buy a switch which is managed (VLAN support) for my configuration, or will a cheaper unmanaged switch work? I have servers with two NICS each. The first NIC is public and the second NIC is private. The router will plug into the switch port 1 let's say (public). Then server 1 public plugs into port 2 on the switch, and sever 1 private plugs into port 3 on the switch. The public interface is: 192.168.X.X / 255.255.0.0 and the private interface is 10.0.X.X / 255.255.0.0. So looks like: ** SWITCH ** Port Device Network 1 Router/Firewall 192.168.X.X 2 Server 1 Public 192.168.X.X 3 Server 1 Private 10.0.X.X 4 Server 2 Public 192.168.X.X 5 Server 2 Private 10.0.X.X 6 Server 3 Public 192.168.X.X 7 Server 3 Private 10.0.X.X Thanks.

  Read the article

• How can I disrupt my roommate's BitTorrent?

  - by bob

  We're on a 50 mb/s Comcast connection and our connection right now is coming in under 1.5 mb/s. Our roommate left for a week with BitTorrent running (Azureus client, we think). Our latency is approaching 300 ms. His door is locked up tight, and both his machine and the router for the house are located inside. I've even flipped the power breaker in the house and that barely works for 2 minutes. His laptop keeps on running, and once the cable modem and router come back up and the machine reconnects, the torrents resume in earnest. I've been running nmap and identified his IP on our LAN. Is there anything I can do over the LAN to make his torrents start to fail or slow down?

  Read the article

• Windows 7 Intermittent Connection Issues (Continuously "identifying")

  - by andrewktmeikle

  I have an issue solely with my desktop windows 7 machine on my network (the network has multiple different devices, on the same and different operating systems) and the issue is that irregularly, although sometimes frequently, I briefly get disconnected from the internet (briefly is for around 5-10 seconds). However, I never loose the bars on the wifi thing, eg I don't get the yellow triangle, but it goes to the identifying stage and then reconnects. The reason I noticed the problem was when I was streaming music it would stop and I would refresh the page and it would start working again ( turned out it was because it took that amount of time to get connected again). So my question is, what would cause the intermittent issues and start the "identifying" process again. I don't think its my router, because no one else is having problems, so the other option is that its a problem specifically with my machine. I'm connecting to a Netgear DG834GT router, and I'm using a Edimax Wireless-N150 USB Adapter. Anyone have any ideas?

  Read the article

• Extremely poor WiFi reception on new desktop

  - by guy

  I just received a new desktop with a built-in WiFi card (Windows 7 Home Premium x64). However, I am only able to receive any WiFi signal when the computer is within 1-2 meters of a router. Even then, the signal is very weak (Windows 7 says it is "poor"). I have tried this with 2 different routers and see similar results. I have somewhere around a dozen other devices that can connect to both routers with greater signal strength (usually full strength) from much, much further away. When I tried calling support I was instructed to reinstall my drivers and attempt to change the WiFi channel of the router. Neither worked. I was then told that the problem was with my routers and that the computer was functioning normally and that it was certainly not a hardware problem. What would be the cause of this and is there anything I can do to fix it?

  Read the article

• Establish direct cable connection between Windows 8 PCs in home network

  - by Marie. P.

  I'm running two PCs, a desktop and a laptop with Windows 8 Release Preview ("Build 8400"). They are connected to the same router in infrastructure mode, thereby having wireless internet. Due to often file synchronization between the machines I want to establish a cable connection that allows direct file transfer, without needing to use the wireless. When I plug in the cable (normal, not cross-over), I see in "Control Panel\Network and Internet\Network Connections": "Ethernet - unidentified Network" on both PCs. Transferring a file between both still only uses the WiFi via the Router. I noticed that when turning off the wifi on one PC, I can set up a shared internet connection that will work via Ethernet-cable, but since sometimes only one PC runs, sometimes the other one, I do not want to have the internet of one machine to be dependent on the other one being switched on. I do not have a crossover-cable, but since I did connect the PCs already successfully (just without both being on the internet), I'm sure that this should also work with a normal ethernet cable.

  Read the article

• Network based on Netgear FVS318 extremely slow

  - by Fentible

  A network I maintain uses an FVS318 as a router, with a separate switch. Communication within the network is slow. Out to the internet is even slower. As it stands there is one patch from the FVS to the switch and no other devices directly connected to the FVS because any that are run so slowly they might as well not be connected to the network. Swapping in a bog-standard home router dramatically increases network speed, but that's not a viable solution because some of the enterprise features of the FVS are required. There are quite a few complaints about this on the Netgear forum, but Netgear support have not been forthcoming with any help - so I turn to you all: any ideas?

  Read the article

< Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146  | Next Page >