hardware reserved - Page 140

Windows CE: SDK Doesn’t Show up in Visual Studio 2008

- by Bruce Eitman

A customer recently contacted me because after installing an SDK it didn’t show up in Visual Studio 2008. So being a good vendor I installed VS2008 and then installed the SDK – no problem the SDK showed up and I could create projects based on it. I let the customer know that the SDK definitely works with VS2008. The customer got back to me and asked what OS I was using. Hmm, how could that play into this? I told him that I use Windows XP, and it turned out that he is way more modern than I am and is using both Windows Vista and 7. The customer opened a support case with Microsoft. The answer turns out to be that the SDK install requires the user to be logged on as an administrator when installing on Windows Vista and 7 for the SDK to show up in Visual Studio 2008. This problem does not seem to exist for Visual Studio 2005 on those operating systems. The actual instructions from Microsoft Support are: 1) Make sure Visual Studio 2008 is not running. I also shut down the device emulator manager but you may not be using that. 2) Open a “Visual Studio 2008 Command Prompt” as Administrator. On Windows 7 just right click the short cut and pick the “Run as administrator” option. 3) Enter the following command: msiexec /log SDKInstallLog.txt /package <the path to your .msi file> 4) When asked if you wish to do a custom or complete install pick custom 5) Instruct the installer to omit the installation of the documentation. This was something I found about CE 6 SDK installation issue and may have no bearing upon your problem but I did it anyway. 6) Install Copyright © 2010 – Bruce Eitman All Rights Reserved

Read the article

'rman' cheat-sheet and rlwrap completion

- by katsumii

I started using 'rlwrap' some monthes ago like one of my colleague does.bash-like features in sqlplus, rman and other Oracle command line tools (Oracle Luxembourg Core Tech' Blog by Gilles Haro)One can find specific Oracle extension for databases 9i, 10g and 11g (keyword textfile) over here. This will avoid you the need to create this .oracle_keywords file.There is 'rman' keyword file in the link above. I experimented a little and found some missing keywords which are:MAXCORRUPTION PRIMARY NOCFAU VIRTUAL COMPRESSION FOREIGN With these words added, 'rman' works like this:$ rlwrap -f ~/rman $ORACLE_HOME/bin/rman Recovery Manager: Release 11.2.0.3.0 - Production on Mon Dec 3 02:56:04 2012 Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved. RMAN> <-- Hit TAB Display all 211 possibilities? (y or n) As you can guess, this completion is not context aware.I found these missing words by creating a kind of 'cheat sheet' for rman with the script like below. This sheet contains list of verbs and 1st operands. I uploaded to here so one can create a coffee cup with a lot of esoteric words printed on :)validWords() { sed -n 's/^RMAN-01009: syntax error: found "identifier": expecting one of: //p' \ | sed -r 's/double-quoted-string, single-quoted-string/Some String/;s/, /" "/g;s/""//' } echo "Bogus" | rman | validWords > /tmp/rman.$$ for i in $(cat /tmp/rman.$$) do i=$(echo $i | tr -d '"') echo "#### $i ####" echo "$i Bogus" | rman | validWords done One can find more keywords in the document here.

Read the article

License Requirements for Including Dual-Licensed Open-Source Software

- by Rick Roth

How do you opt into one software license and not the other when the distributor gives the consumer more than one choice? For example I would like to use the DataTables JavaScript library in my web application. According to their web site, "DataTables is dual licensed under the GPL v2 license or a BSD (3-point) license." Furthermore, the source code of the JavaScript library has this text that calls out both licenses: /** * @summary DataTables * @description Paginate, search and sort HTML tables * @version 1.9.4 * @file jquery.dataTables.js * @author Allan Jardine (www.sprymedia.co.uk) * @contact www.sprymedia.co.uk/contact * * @copyright Copyright 2008-2012 Allan Jardine, all rights reserved. * * This source file is free software, under either the GPL v2 license or a * BSD style license, available at: * http://datatables.net/license_gpl2 * http://datatables.net/license_bsd * * This source file is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY * or FITNESS FOR A PARTICULAR PURPOSE. See the license files for details. * * For details please refer to: http://www.datatables.net */ Finally, the web pages with the licensing text (e.g. the DataTables BSD license page) has this statement: "DataTables is made available under both the GPL v2 license and a BSD (3-point) style license. You can select which one you wish to use the DataTables code under." My specific question is "how do you select which one you want to use." In my case, I want to only use the BSD license and I want to make it explicitly clear that I do not opt into the GPL v2 license in any way. How do you do that and have it hold up to legal challenge?

Read the article

Windows Embedded CE DiskPrep PowerToy

- by Bruce Eitman

Kurt Kennett from Microsoft has offered up a handy new tool. This tool is useful for creating a boot disk for x86 Windows CE systems that use the BIOSLoader. This is especially useful for creating disks with formats other than FAT16, which are fairly easy to create. I am letting you know about this new tool, but I have to be honest in telling you that I haven’t used it myself because it is for Windows Vista and Windows 7 – which I don’t have available right now. But you can bet that I will be setting up a virtual machine to give it a try. Here is what Kurt has to say about the tool: Download the DiskPrep Tool DiskPrep can prepare any hard disk that can be attached to your development PC so that it can boot your X86-based Windows CE OS Design. USB disks (including disk "keys"), Compact Flash Cards, and SD cards all work if your system bios can boot from that type of media. FAT16, FAT32, and exFAT all supported. DOS is not used - the program prepares the bios loader on the disk and only uses that. If you use Windows Vista or Windows 7, you can use VHD files for VirtualPC. This allows for rapid prototyping of a self-booting system. Copyright © 2010 – Bruce Eitman All Rights Reserved

Read the article

Escaping Generics with T4 Templates

- by Gavin Stevens

I've been doing some work with T4 templates lately and ran into an issue which I couldn't find an answer to anywhere. I finally figured it out, so I thought I'd share the solution. I was trying to generate a code class with a T4 template which used generics The end result a method like: public IEnumerator GetEnumerator() { return new TableEnumerator<Table>(_page); } the related section of the T4 template looks like this: public IEnumerator GetEnumerator() { return new TableEnumerator<#=renderClass.Name#>(_page); } But this of course is missing the Generic Syntax for < > which T4 complains about because < > are reserved. using syntax like <#<#><#=renderClass.Name#><#=<#> won't work becasue the TextTransformation engine chokes on them. resulting in : Error 2 The number of opening brackets ('<#') does not match the number of closing brackets ('#>') even trying to escape the characters won't work: <#\<#><#=renderClass.Name#><#\<#> this results in: Error 4 A Statement cannot appear after the first class feature in the template. Only boilerplate, expressions and other class features are allowed after the first class feature block. The final solution delcares a few strings to represent the literals like this: <#+ void RenderCollectionEnumerator(RenderCollection renderClass) { string open = "<"; string close =">"; #> public partial class <#=renderClass.Name#> : IEnumerable { private readonly PageBase _page; public <#=renderClass.Name#>(PageBase page) { _page = page; } public IEnumerator GetEnumerator() { return new TableEnumerator<#=open#><#=renderClass.Name#><#=close#>(_page); } } <#+ } #> This works, and everyone is happy, resulting in an automatically generated class enumerator, complete with generics! Hopefully this will save someone some time :)

Read the article

Migrate ASP.Net web site from IIS6 to IIS7

- by David.Chu.ca

I have to migrate an ASP.Net web site from IIS6 to IIS7. I tried to copy the all files for a web site from IIS6 (c:\inetpub\wwwroot\MySite) to another box with Windows Server 2008 R2 where IIS7 is the default web server. However, the simply copy seems not working. Should I rebuild the web site for IIS7 or should I make changes on the new box with IIS7 such as web.config? Thanks for the comments. Further investigation I found that http handers seems caused exception:  After I comment out the above handler in web.config, the web page works fine. This is just my initial test. I am not sure if I should rebuild the web site from source codes or not. If so, do I need to specify for IIS7?

Read the article

Frederick .NET User Group May 2010 Meeting

- by John Blumenauer

FredNUG is pleased to announce our May speaker will be Kevin Griffin. Kevin has been speaking at several community events this spring and we’re pleased he’s stopping by FredNUG to present at our May meeting. On May 18th, we’ll start with pizza and social networking at 6:30 PM. Then, starting at 7 PM, Kevin Griffin will present “Awesomize Your Windows Apps.” The scheduled agenda is: 6:30 PM - 7:00 PM - Pizza/Social Networking/Announcements 7:00 PM - 8:30 PM - Main Topic: Awesomize Your Windows Apps with Kevin Griffin Main Topic Description: Awesomize Your Windows Apps With the release of Windows 7, many developers might be looking to take advantage of the features Windows 7 offers. This presentation offers attendees a broad overview of the Windows API Code Pack, which is a managed library for .NET developers to use for accessing some of the underlying functionality of Windows that was typically reserved for Interop fans. Topics and demos include Windows 7 taskbar functionality, Task dialogs, Libraries support, and more. Speaker Bio: Kevin Griffin is a .NET Developer for Antech Systems, located in Chesapeake, VA. He's an ASPInsider and the leader of the Hampton Roads .NET Users Group. Additionally, he serves as an INETA mentor for the state of Virginia. Often, he can be found speaking at or attending other local user group meetings or code camps. He enjoys working with new technology, and consistently works on being a better developer and building the best software he can. Follow Kevin on Twitter: http://www.twitter.com/1kevgriff Read Kevin's Blog: http://www.kevgriffin.com 8:30 PM - 8:45 PM – RAFFLE! Please join us and get involved in our .NET developers community!

Read the article

Platform Builder: PBWorkspaces CESysgen.bat Not Used?

- by Bruce Eitman

One of the things that I like about Windows CE is that I am always learning new things, but in this case it is a bit disturbing. We working with Multi UI (MUI) this week and discovered some problems with Windows CE 5.0 and Chinese language support. These problems don’t exist in CE 6.0. The problem was that in the batch files in Public\CEBASE\oak\misc, specifically weceshellfe.bat, some of the shell components needed are only included if certain LOCALs are selected. English is not one of them, I suppose this is because someone didn’t think that we would ever use them and English – doh. No problem, just work around this in PBWorkspaces\<workspace>\WINCE500\<BPS>\cesysgen.bat. But that didn’t work. After a lot of trial and error, what I determined is that this cesysgen.bat isn’t actually used by Platform Builder any more. Instead, in that same folder is a <workspace>.bat file that is called by Public\CEBASE\oak\misc\cesysgen.bat. That leads to some new problems though, but solvable, in that what I really wanted to do was add a fix after the batch files in CEBASE run, but <workspace>.bat runs before the other batch files in CEBASE. So what I finally came up with was to add the fix to the PASS2 handling in <workspace>.bat. Copyright © 2010 – Bruce Eitman All Rights Reserved

Read the article

Platform Builder: Removing the Version Information from the Desktop

- by Bruce Eitman

The question of how to remove the version information from the desktop has been around for a long time. It came up again today. The question is about the string displayed on the desktop that looks like one of these, depending on the OS verison: Windows Embedded CE v6.00 (Build xxxx on xxxx) Microsoft Windows CE v5.00 (Build xxxx on xxxx) Microsoft Windows CE .NET v4.20 (Build xxxx on xxxx) I have looked into this in the past, but never really had a definitive answer. I have an answer now. The short answer is that the version information is displayed if the code is built without SHIP_BUILD defined. I have to be honest, I have given this answer in the newsgroups in the past, but I still had questions. My questions have come from different build machines giving different results. I have noticed that some engineer’s workstations would have the version information displayed, while others did not. I always stopped short of spending time investigating further because our release build machines never resulted in the version information being displayed. But, we do not typically define SHIP_BUILD for our releases because our customers want or need the debug output. So today I dug further into the question. The answer is actually quite simple. Microsoft builds the retail shell libraries with SHIP_BUILD defined and releases the libraries with Platform Builder. Normally the source code does not need to be built during Sysgen, so the libraries that Microsoft delivered are linked to create the Explorer shell. So typically the Explorer shell displays the version information for debug builds, but does not for retail builds. The trouble comes when the source code is forced to be rebuilt for a retail build. This might happen if an engineer uses “Build and Sysgen” or builds the Public\Shell folder from the command line with the clean flag. I am not sure if Build and Sysgen will cause the problem or not – I have never used Build and Sysgen and I strongly advise against using it (see Platform Builder: Don’t use Build and Sysgen) Copyright © 2010 – Bruce Eitman All Rights Reserved

Read the article

Can I legally publish my Fortran 90 wrappers to nVidias CUFFT library (from CUDA SDK)?

- by Jakub Narebski

From a legal standpoint (licensing issues), can I legally in agreement with license publish Fortran 90 wrappers (bindings) to CUFFT library from nVidia CUDA Toolkit, under some open source license (either CC0 i.e. public domain, or some kind of permissive license like BSD). nVidia provides only C bindings with their CUDA SDK. Header files contain the following text: /* * Copyright 1993-2011 NVIDIA Corporation. All rights reserved. * * NOTICE TO LICENSEE: * * This source code and/or documentation ("Licensed Deliverables") are * subject to NVIDIA intellectual property rights under U.S. and * international Copyright laws. * * These Licensed Deliverables contained herein is PROPRIETARY and * CONFIDENTIAL to NVIDIA and is being provided under the terms and * conditions of a form of NVIDIA software license agreement by and * between NVIDIA and Licensee ("License Agreement") or electronically * accepted by Licensee. Notwithstanding any terms or conditions to * the contrary in the License Agreement, reproduction or disclosure * of the Licensed Deliverables to any third party without the express * written consent of NVIDIA is prohibited. The License.txt file includes the following fragment Source Code: Developer shall have the right to modify and create derivative works with the Source Code. Developer shall own any derivative works ("Derivatives") it creates to the Source Code, provided that Developer uses the Materials in accordance with the terms and conditions of this Agreement. Developer may distribute the Derivatives, provided that all NVIDIA copyright notices and trademarks are propagated and used properly and the Derivatives include the following statement: "This software contains source code provided by NVIDIA Corporation."

Read the article

8 Reasons Why Even Microsoft Agrees the Windows Desktop is a Nightmare

- by Chris Hoffman

Let’s be honest: The Windows desktop is a mess. Sure, it’s extremely powerful and has a huge software library, but it’s not a good experience for average people. It’s not even a good experience for geeks, although we tolerate it. Even Microsoft agrees about this. Microsoft’s Surface tablets with Windows RT don’t support any third-party desktop apps. They consider this a feature — users can’t install malware and other desktop junk, so the system will always be speedy and secure. Malware is Still Common Malware may not affect geeks, but it certainly continues to affect average people. Securing Windows, keeping it secure, and avoiding unsafe programs is a complex process. There are over 50 different file extensions that can contain harmful code to keep track of. It’s easy to have theoretical discussions about how malware could infect Mac computers, Android devices, and other systems. But Mac malware is extremely rare, and has generally been caused by problem with the terrible Java plug-in. Macs are configured to only run executables from identified developers by default, whereas Windows will run everything. Android malware is talked about a lot, but Android malware is rare in the real world and is generally confined to users who disable security protections and install pirated apps. Google has also taken action, rolling out built-in antivirus-like app checking to all Android devices, even old ones running Android 2.3, via Play Services. Whatever the reason, Windows malware is still common while malware for other systems isn’t. We all know it — anyone who does tech support for average users has dealt with infected Windows computers. Even users who can avoid malware are stuck dealing with complex and nagging antivirus programs, especially since it’s now so difficult to trust Microsoft’s antivirus products. Manufacturer-Installed Bloatware is Terrible Sit down with a new Mac, Chromebook, iPad, Android tablet, Linux laptop, or even a Surface running Windows RT and you can enjoy using your new device. The system is a clean slate for you to start exploring and installing your new software. Sit down with a new Windows PC and the system is a mess. Rather than be delighted, you’re stuck reinstalling Windows and then installing the necessary drivers or you’re forced to start uninstalling useless bloatware programs one-by-one, trying to figure out which ones are actually useful. After uninstalling the useless programs, you may end up with a system tray full of icons for ten different hardware utilities anyway. The first experience of using a new Windows PC is frustration, not delight. Yes, bloatware is still a problem on Windows 8 PCs. Manufacturers can customize the Refresh image, preventing bloatware rom easily being removed. Finding a Desktop Program is Dangerous Want to install a Windows desktop program? Well, you’ll have to head to your web browser and start searching. It’s up to you, the user, to know which programs are safe and which are dangerous. Even if you find a website for a reputable program, the advertisements on that page will often try to trick you into downloading fake installers full of adware. While it’s great to have the ability to leave the app store and get software that the platform’s owner hasn’t approved — as on Android — this is no excuse for not providing a good, secure software installation experience for typical users installing typical programs. Even Reputable Desktop Programs Try to Install Junk Even if you do find an entirely reputable program, you’ll have to keep your eyes open while installing it. It will likely try to install adware, add browse toolbars, change your default search engine, or change your web browser’s home page. Even Microsoft’s own programs do this — when you install Skype for Windows desktop, it will attempt to modify your browser settings t ouse Bing, even if you’re specially chosen another search engine and home page. With Microsoft setting such an example, it’s no surprise so many other software developers have followed suit. Geeks know how to avoid this stuff, but there’s a reason program installers continue to do this. It works and tricks many users, who end up with junk installed and settings changed. The Update Process is Confusing On iOS, Android, and Windows RT, software updates come from a single place — the app store. On Linux, software updates come from the package manager. On Mac OS X, typical users’ software updates likely come from the Mac App Store. On the Windows desktop, software updates come from… well, every program has to create its own update mechanism. Users have to keep track of all these updaters and make sure their software is up-to-date. Most programs now have their act together and automatically update by default, but users who have old versions of Flash and Adobe Reader installed are vulnerable until they realize their software isn’t automatically updating. Even if every program updates properly, the sheer mess of updaters is clunky, slow, and confusing in comparison to a centralized update process. Browser Plugins Open Security Holes It’s no surprise that other modern platforms like iOS, Android, Chrome OS, Windows RT, and Windows Phone don’t allow traditional browser plugins, or only allow Flash and build it into the system. Browser plugins provide a wealth of different ways for malicious web pages to exploit the browser and open the system to attack. Browser plugins are one of the most popular attack vectors because of how many users have out-of-date plugins and how many plugins, especially Java, seem to be designed without taking security seriously. Oracle’s Java plugin even tries to install the terrible Ask toolbar when installing security updates. That’s right — the security update process is also used to cram additional adware into users’ machines so unscrupulous companies like Oracle can make a quick buck. It’s no wonder that most Windows PCs have an out-of-date, vulnerable version of Java installed. Battery Life is Terrible Windows PCs have bad battery life compared to Macs, IOS devices, and Android tablets, all of which Windows now competes with. Even Microsoft’s own Surface Pro 2 has bad battery life. Apple’s 11-inch MacBook Air, which has very similar hardware to the Surface Pro 2, offers double its battery life when web browsing. Microsoft has been fond of blaming third-party hardware manufacturers for their poorly optimized drivers in the past, but there’s no longer any room to hide. The problem is clearly Windows. Why is this? No one really knows for sure. Perhaps Microsoft has kept on piling Windows component on top of Windows component and many older Windows components were never properly optimized. Windows Users Become Stuck on Old Windows Versions Apple’s new OS X 10.9 Mavericks upgrade is completely free to all Mac users and supports Macs going back to 2007. Apple has also announced their intention that all new releases of Mac OS X will be free. In 2007, Microsoft had just shipped Windows Vista. Macs from the Windows Vista era are being upgraded to the latest version of the Mac operating system for free, while Windows PCs from the same era are probably still using Windows Vista. There’s no easy upgrade path for these people. They’re stuck using Windows Vista and maybe even the outdated Internet Explorer 9 if they haven’t installed a third-party web browser. Microsoft’s upgrade path is for these people to pay $120 for a full copy of Windows 8.1 and go through a complicated process that’s actaully a clean install. Even users of Windows 8 devices will probably have to pay money to upgrade to Windows 9, while updates for other operating systems are completely free. If you’re a PC geek, a PC gamer, or someone who just requires specialized software that only runs on Windows, you probably use the Windows desktop and don’t want to switch. That’s fine, but it doesn’t mean the Windows desktop is actually a good experience. Much of the burden falls on average users, who have to struggle with malware, bloatware, adware bundled in installers, complex software installation processes, and out-of-date software. In return, all they get is the ability to use a web browser and some basic Office apps that they could use on almost any other platform without all the hassle. Microsoft would agree with this, touting Windows RT and their new “Windows 8-style” app platform as the solution. Why else would Microsoft, a “devices and services” company, position the Surface — a device without traditional Windows desktop programs — as their mass-market device recommended for average people? This isn’t necessarily an endorsement of Windows RT. If you’re tech support for your family members and it comes time for them to upgrade, you may want to get them off the Windows desktop and tell them to get a Mac or something else that’s simple. Better yet, if they get a Mac, you can tell them to visit the Apple Store for help instead of calling you. That’s another thing Windows PCs don’t offer — good manufacturer support. Image Credit: Blanca Stella Mejia on Flickr, Collin Andserson on Flickr, Luca Conti on Flickr

Read the article

HPET for x86 BSP (how to build it for WCE8)

- by Werner Willemsens

Originally posted on: http://geekswithblogs.net/WernerWillemsens/archive/2014/08/02/157895.aspx"I needed a timer". That is how we started a few blogs ago our series about APIC and ACPI. Well, here it is. HPET (High Precision Event Timer) was introduced by Intel in early 2000 to: Replace old style Intel 8253 (1981!) and 8254 timers Support more accurate timers that could be used for multimedia purposes. Hence Microsoft and Intel sometimes refers to HPET as Multimedia timers. An HPET chip consists of a 64-bit up-counter (main counter) counting at a frequency of at least 10 MHz, and a set of (at least three, up to 256) comparators. These comparators are 32- or 64-bit wide. The HPET is discoverable via ACPI. The HPET circuit in recent Intel platforms is integrated into the SouthBridge chip (e.g. 82801) All HPET timers should support one-shot interrupt programming, while optionally they can support periodic interrupts. In most Intel SouthBridges I worked with, there are three HPET timers. TIMER0 supports both one-shot and periodic mode, while TIMER1 and TIMER2 are one-shot only. Each HPET timer can generate interrupts, both in old-style PIC mode and in APIC mode. However in PIC mode, interrupts cannot freely be chosen. Typically IRQ11 is available and cannot be shared with any other interrupt! Which makes the HPET in PIC mode virtually unusable. In APIC mode however more IRQs are available and can be shared with other interrupt generating devices. (Check the datasheet of your SouthBridge) Because of this higher level of freedom, I created the APIC BSP (see previous posts). The HPET driver code that I present you here uses this APIC mode. Hpet.reg [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Hpet] "Dll"="Hpet.dll" "Prefix"="HPT" "Order"=dword:10 "IsrDll"="giisr.dll" "IsrHandler"="ISRHandler" "Priority256"=dword:50 Because HPET does not reside on the PCI bus, but can be found through ACPI as a memory mapped device, you don't need to specify the "Class", "SubClass", "ProgIF" and other PCI related registry keys that you typically find for PCI devices. If a driver needs to run its internal thread(s) at a certain priority level, by convention in Windows CE you add the "Priority256" registry key. Through this key you can easily play with the driver's thread priority for better response and timer accuracy. See later. Hpet.cpp (Hpet.dll) This cpp file contains the complete HPET driver code. The file is part of a folder that you typically integrate in your BSP (\src\drivers\Hpet). It is written as sample (example) code, you most likely want to change this code to your specific needs. There are two sets of #define's that I use to control how the driver works. _TRIGGER_EVENT or _TRIGGER_SEMAPHORE: _TRIGGER_EVENT will let your driver trigger a Windows CE Event when the timer expires, _TRIGGER_SEMAPHORE will trigger a Windows CE counting Semaphore. The latter guarantees that no events get lost in case your application cannot always process the triggers fast enough. _TIMER0 or _TIMER2: both timers will trigger an event or semaphore periodically. _TIMER0 will use a periodic HPET timer interrupt, while _TIMER2 will reprogram a one-shot HPET timer after each interrupt. The one-shot approach is interesting if the frequency you wish to generate is not an even multiple of the HPET main counter frequency. The sample code uses an algorithm to generate a more correct frequency over a longer period (by reducing rounding errors). _TIMER1 is not used in the sample source code. HPT_Init() will locate the HPET I/O memory space, setup the HPET counter (_TIMER0 or _TIMER2) and install the Interrupt Service Thread (IST). Upon timer expiration, the IST will run and on its turn will generate a Windows CE Event or Semaphore. In case of _TIMER2 a new one-shot comparator value is calculated and set for the timer. The IRQ of the HPET timers are programmed to IRQ22, but you can choose typically from 20-23. The TIMERn_INT_ROUT_CAP bits in the TIMn_CONF register will tell you what IRQs you can choose from. HPT_IOControl() can be used to set a new HPET counter frequency (actually you configure the counter timeout value in microseconds), start and stop the timer, and request the current HPET counter value. The latter is interesting because the Windows CE QueryPerformanceCounter() and QueryPerformanceFrequency() APIs implement the same functionality, albeit based on other counter implementations. HpetDrvIst() contains the IST code. DWORD WINAPI HpetDrvIst(LPVOID lpArg) { psHpetDeviceContext pHwContext = (psHpetDeviceContext)lpArg; DWORD mainCount = READDWORD(pHwContext->g_hpet_va, GenCapIDReg + 4); // Main Counter Tick period (fempto sec 10E-15) DWORD i = 0; while (1) { WaitForSingleObject(pHwContext->g_isrEvent, INFINITE); #if defined(_TRIGGER_SEMAPHORE) LONG p = 0; BOOL b = ReleaseSemaphore(pHwContext->g_triggerEvent, 1, &p); #elif defined(_TRIGGER_EVENT) BOOL b = SetEvent(pHwContext->g_triggerEvent); #else #pragma error("Unknown TRIGGER") #endif #if defined(_TIMER0) DWORD currentCount = READDWORD(pHwContext->g_hpet_va, MainCounterReg); DWORD comparator = READDWORD(pHwContext->g_hpet_va, Tim0_ComparatorReg + 0); SETBIT(pHwContext->g_hpet_va, GenIntStaReg, 0); // clear interrupt on HPET level InterruptDone(pHwContext->g_sysIntr); // clear interrupt on OS level _LOGMSG(ZONE_INTERRUPT, (L"%s: HpetDrvIst 0 %06d %08X %08X", pHwContext->g_id, i++, currentCount, comparator)); #elif defined(_TIMER2) DWORD currentCount = READDWORD(pHwContext->g_hpet_va, MainCounterReg); DWORD previousComparator = READDWORD(pHwContext->g_hpet_va, Tim2_ComparatorReg + 0); pHwContext->g_counter2.QuadPart += pHwContext->g_comparator.QuadPart; // increment virtual counter (higher accuracy) DWORD comparator = (DWORD)(pHwContext->g_counter2.QuadPart >> 8); // "round" to real value WRITEDWORD(pHwContext->g_hpet_va, Tim2_ComparatorReg + 0, comparator); SETBIT(pHwContext->g_hpet_va, GenIntStaReg, 2); // clear interrupt on HPET level InterruptDone(pHwContext->g_sysIntr); // clear interrupt on OS level _LOGMSG(ZONE_INTERRUPT, (L"%s: HpetDrvIst 2 %06d %08X %08X (%08X)", pHwContext->g_id, i++, currentCount, comparator, comparator - previousComparator)); #else #pragma error("Unknown TIMER") #endif } return 1; } The following figure shows how the HPET hardware interrupt via ISR -> IST is translated in a Windows CE Event or Semaphore by the HPET driver. The Event or Semaphore can be used to trigger a Windows CE application. HpetTest.cpp (HpetTest.exe)This cpp file contains sample source how to use the HPET driver from an application. The file is part of a separate (smart device) VS2013 solution. It contains code to measure the generated Event/Semaphore times by means of GetSystemTime() and QueryPerformanceCounter() and QueryPerformanceFrequency() APIs. HPET evaluation If you scan the internet about HPET, you'll find many remarks about buggy HPET implementations and bad performance. Unfortunately that is true. I tested the HPET driver on an Intel ICH7M SBC (release date 2008). When a HPET timer expires on the ICH7M, an interrupt indeed is generated, but right after you clear the interrupt, a few more unwanted interrupts (too soon!) occur as well. I tested and debugged it for a loooong time, but I couldn't get it to work. I concluded ICH7M's HPET is buggy Intel hardware. I tested the HPET driver successfully on a more recent NM10 SBC (release date 2013). With the NM10 chipset however, I am not fully convinced about the timer's frequency accuracy. In the long run - on average - all is fine, but occasionally I experienced upto 20 microseconds delays (which were immediately compensated on the next interrupt). Of course, this was all measured by software, but I still experienced the occasional delay when both the HPET driver IST thread as the application thread ran at CeSetThreadPriority(1). If it is not the hardware, only the kernel can cause this delay. But Windows CE is an RTOS and I have never experienced such long delays with previous versions of Windows CE. I tested and developed this on WCE8, I am not heavily experienced with it yet. Internet forum threads however mention inaccurate HPET timer implementations as well. At this moment I haven't figured out what is going on here. Useful references: http://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/software-developers-hpet-spec-1-0a.pdf http://en.wikipedia.org/wiki/High_Precision_Event_Timer http://wiki.osdev.org/HPET Windows CE BSP source file package for HPET in MyBsp Note that this source code is "As Is". It is still under development and I cannot (and never will) guarantee the correctness of the code. Use it as a guide for your own HPET integration.

Read the article

CodePlex Daily Summary for Tuesday, October 15, 2013

CodePlex Daily Summary for Tuesday, October 15, 2013Popular ReleasesFFXIV Crafting Simulator: Crafting Simulator 2.4.1: -Fixed the offset for the new patch (Auto Loading function)iBoxDB.EX - Fast Transactional NoSQL Database Resources: iBoxDB.net fast transactional nosql database 1.5.2: Easily process objects and documents, zero configuration. fast embeddable transactional nosql document database, includes CURD, QueryLanguage, Master-Master-Slave Replication, MVCC, etc. supports .net2, .net4, windows phone, mono, unity3d, node.js , copy and run. http://download-codeplex.sec.s-msft.com/Download?ProjectName=iboxdb&DownloadId=737783 Benchmark with MongoDB Compatibility more platforms for java versionneurogoody: slicebox: this is the slice box jsEvent-Based Components AppBuilder: AB3.AppDesigner.55: Iteration 55 (Feature): Moving of TargetEdge (simple wires only) by mouse.Sandcastle Help File Builder: SHFB v1.9.8.0 with Visual Studio Package: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This new release contains bug fixes and feature enhancements. There are some potential breaking changes in this release as some features of the Help File Builder have been moved into...SharpConfig: SharpConfig 1.2: Implemented comment parsing. Comments are now part of settings and setting categories. New properties: Setting: Comment PreComments SettingCategory: Comment PreCommentsC++ REST SDK (codename "Casablanca"): C++ REST SDK 1.3.0: This release fixes multiple customer reported issues as well as the following: Full support for Dev12 binaries and project files Full support for Windows XP New sample highlighting the Client and Server APIs : BlackJack Expose underlying native handle to set custom options on http_client Improvements to Listener Library Note: Dev10 binaries have been dropped as of this release, however the Dev10 project files are still available in the Source CodeAD ACL Scanner: 1.3.2: Minor bug fixed: Powershell 4.0 will report: Select—Object: Parameter cannot be processed because the parameter name p is ambiguous.Json.NET: Json.NET 5.0 Release 7: New feature - Added support for Immutable Collections New feature - Added WriteData and ReadData settings to DataExtensionAttribute New feature - Added reference and type name handling support to extension data New feature - Added default value and required support to constructor deserialization Change - Extension data is now written when serializing Fix - Added missing casts to JToken Fix - Fixed parsing large floating point numbers Fix - Fixed not parsing some ISO date ...RESX Manager: ResxManager 0.2.1: FIXED: Many critical bugs have been fixed. New Features Error logging for improved exception handling New toolbar Improvements of user interfaceFast YouTube Downloader: YouTube Downloader 2.2.0: YouTube Downloader 2.2.0VidCoder: 1.5.8 Beta: Added hardware acceleration options: Bicubic OpenCL scaling algorithm, QSV decoding/encoding and DXVA decoding. Updated HandBrake core to SVN 5834. Updated VidCoder setup icon. Fixed crash when choosing the mp4v2 container on x86 and opening on x64. Warning: the hardware acceleration features require specific hardware or file types to work correctly: QSV: Need an Intel processor that supports Quick Sync Video encoding, with a monitor hooked up to the Intel HD Graphics output and the lat...ASP.net MVC Awesome - jQuery Ajax Helpers: 3.5.2: version 3.5.2 - fix for setting single value to multivalue controls - datepicker min max date offset fix - html encoding for keys fix - enable Column.ClientFormatFunc to be a function call that will return a function version 3.5.1 - fixed html attributes rendering - fixed loading animation rendering - css improvements version 3.5 ========================== - autosize for all popups ( can be turned off by calling in js awe.autoSize = false ) - added Parent, Paremeter extensions ...Wsus Package Publisher: Release v1.3.1310.12: Allow the Update Creation Wizard to be set in full screen mode. Fix a bug which prevent WPP to Reset Remote Sus Client ID. Change the behavior of links in the Update Detail Viewer. Left-Click to open, Right-Click to copy to the Clipboard.TerrariViewer: TerrariViewer v7 [Terraria Inventory Editor]: This is a complete overhaul but has the same core style. I hope you enjoy it. This version is compatible with 1.2.0.3 Please send issues to my Twitter or https://github.com/TJChap2840WDTVHubGen - Adds Metadata, thumbnails and subtitles to WDTV Live Hubs: WDTVHubGen.v2.1.6.maint: I think this covers all of the issues. new additions: fixed the thumbnail problem for backgrounds. general clean up and error checking. need to get this put through the wringer and all feedback is welcome.BIDS Helper: BIDS Helper 1.6.4: This BIDS Helper release brings the following new features and fixes: New Features: A new Bus Matrix style report option when you run the Printer Friendly Dimension Usage report for an SSAS cube. The Biml engine is now fully in sync with the supported subset of Varigence Mist 3.4. This includes a large number of language enhancements, bugfixes, and project deployment support. Fixed Issues: Fixed Biml execution for project connections fixing a bug with Tabular Translations Editor not a...MoreTerra (Terraria World Viewer): MoreTerra 1.11.3: =========== =New Features= =========== New Markers added for Plantera's Bulb, Heart Fruits and Gold Cache. Markers now correctly display for the gems found in rock debris on the floor. =========== =Compatibility= =========== Fixed header changes found in Terraria 1.0.3.1Media Companion: Media Companion MC3.581b: Fix in place for TVDB xml issue. New* Movie - General Preferences, allow saving of ignored 'The' or 'A' to end of movie title, stored in sorttitle field. * Movie - New Way for Cropping Posters. Fixed* Movie - Rename of folders/filename. caught error message. * Movie - Fixed Bug in Save Cropped image, only saving in Pre-Frodo format if Both model selected. * Movie - Fixed Cropped image didn't take zoomed ratio into effect. * Movie - Separated Folder Renaming and File Renaming fuctions durin...SmartStore.NET - Free ASP.NET MVC Ecommerce Shopping Cart Solution: SmartStore.NET 1.2.0: HighlightsMulti-store support "Trusted Shops" plugins Highly improved SmartStore.biz Importer plugin Add custom HTML content to pages Performance optimization New FeaturesMulti-store-support: now multiple stores can be managed within a single application instance (e.g. for building different catalogs, brands, landing pages etc.) Added 3 new Trusted Shops plugins: Seal, Buyer Protection, Store Reviews Added Display as HTML Widget to CMS Topics (store owner now can add arbitrary HT...New ProjectsArtezio SharePoint 2013 Workflow Activities: SharePoint Workflow 2013 doesn’t provide activities to work with permissions, we've fixed it using HttpSend activity that makes REST API calls.Dependency.Injection: An attempt to write a really simple dependency injection framework. Does property-based and recursive dependency injection. Handles singletons. Yay!DHGMS SUO Killer: SUO Killer is a Visual Studio extension to deal with the removal of SUO file to mitigate SUO related issues in Visual Studio. This project is written in C#.dynamicsheet: dynamicsheetExcel Comparator: Excel Comparator is an add-in for Microsoft Excel that allows the user to compare a range between two sheets. FetchAIP: FetchAIP is a utility to download the various sections of the Aeronautical Information Publication (AIP) for New Zealand.Fluent Method and Type Builder: Still working on the summary.getboost: NuGet package for Boost framework.Goldstone Forum: WebForms Forum - TelerikAcademy Team ProjectGroupMe Software Development Kit: .NET Software Development Kit for http://groupme.com/ chat service.GSLMS: ----Import Excel Files Into SQL Server: Load Excel files into SQL Database without schema changes.Inaction: ?????????? jBegin: Learning ASP.net MVC from beginning, then here will be the source code for jbegin.comKDG's Statistical Quality Control Solver: This tool will include methods that can solve sample standard deviation, sample variance, median, mode, moving average, percentiles, margin of error, etc.kpi: Key Performance Indicator (KPI)????; visual studio 2010 with .NET 4.0 runtimeLECO Remote Control Client Application: Sample code and binaries are provided to demonstrate the remote control capability of a LECO Cornerstone instrument.LinkPad: My first Windows Store app intended for student to sketch up thoughts and concepts in quick diagrams.Modler.NET - Automating Graphical Data Model Co-Evolution: Modler.NET was the tool created for a Master's thesis project, which automates the co-evolution of graphical data models and the database that they represent.MyFileManager1: SummaryNever Lotto: Korean 465 Lotto Analyzer and Simulator. The real purpose of this project is to show that this kind of lotto things are just shit.NHibernate: The purpose of this project is to demo CRUD operations using NHibernate with Mono in Visual Studio 2012 using C# language. OAuth2 Authorizer: OAuth2 Authorizer helps you get the access code for a standard OAuth2 REST service that implements 3-legged authentication.Regular Expression for Excel: Regular Expression For Excel is an Excel Plugin. It provides a regular expressions EXCEL support. We can use it in the EXCEL function.Service Tester: Service Tester is an Azure Cloud based load testing application targeted at Soap Web Services which allows you to invoke your Web Service by random parameters.Simple TypeScript and C# Class Generator: Simple GUI application to generate compatible class source code for C# and TypeScript for communications between C# and TypeScript. Soccer team management: ---Spanner: No more stringly-typed web development! Build statically typed single page web applications in C#, automatically generating all HTML, JavaScript, and Knockout.

Read the article

How to tell if SPARC T4 crypto is being used?

- by danx

A question that often comes up when running applications on SPARC T4 systems is "How can I tell if hardware crypto accleration is being used?" To review, the SPARC T4 processor includes a crypto unit that supports several crypto instructions. For hardware crypto these include 11 AES instructions, 4 xmul* instructions (for AES GCM carryless multiply), mont for Montgomery multiply (optimizes RSA and DSA), and 5 des_* instructions (for DES3). For hardware hash algorithm optimization, the T4 has the md5, sha1, sha256, and sha512 instructions (the last two are used for SHA-224 an SHA-384). First off, it's easy to tell if the processor T4 crypto instructions—use the isainfo -v command and look for "sparcv9" and "aes" (and other hash and crypto algorithms) in the output: $ isainfo -v 64-bit sparcv9 applications crc32c cbcond pause mont mpmul sha512 sha256 sha1 md5 camellia kasumi des aes ima hpc vis3 fmaf asi_blk_init vis2 vis popc These instructions are not-privileged, so are available for direct use in user-level applications and libraries (such as OpenSSL). Here is the "openssl speed -evp" command shown with the built-in t4 engine and with the pkcs11 engine. Both run the T4 AES instructions, but the t4 engine is faster than the pkcs11 engine because it has less overhead (especially for smaller packet sizes): t-4 $ /usr/bin/openssl version OpenSSL 1.0.0j 10 May 2012 t-4 $ /usr/bin/openssl engine (t4) SPARC T4 engine support (dynamic) Dynamic engine loading support (pkcs11) PKCS #11 engine support t-4 $ /usr/bin/openssl speed -evp aes-128-cbc # t4 engine used by default . . . The 'numbers' are in 1000s of bytes per second processed. type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes aes-128-cbc 487777.10k 816822.21k 986012.59k 1017029.97k 1053543.08k t-4 $ /usr/bin/openssl speed -engine pkcs11 -evp aes-128-cbc engine "pkcs11" set. . . . The 'numbers' are in 1000s of bytes per second processed. type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes aes-128-cbc 31703.58k 116636.39k 350672.81k 696170.50k 993599.49k Note: The "-evp" flag indicates use the OpenSSL "EnVeloPe" API, which gives more accurate results. That's because it tells OpenSSL to use the same API that external programs use when calling OpenSSL libcrypto functions, evp(3openssl). DTrace Shows if T4 Crypto Functions Are Used OK, good enough, the isainfo(1) command shows the instructions are present, but how does one know if they are being used? Chi-Chang Lin, who works on Oracle Solaris performance, wrote a Dtrace script to show if T4 instructions are being executed. To show the T4 instructions are being used, run the following Dtrace script. Look for functions named "t4" and "yf" in the output. The OpenSSL T4 engine uses functions named "t4" and the PKCS#11 engine uses functions named "yf". To demonstrate, I'll first run "openssl speed" with the built-in t4 engine then with the pkcs11 engine. The performance numbers are not valid due to dtrace probes slowing things down. t-4 # dtrace -Z -n ' pid$target::*yf*:entry,pid$target::*t4_*:entry{ @[probemod, probefunc] = count();}' \ -c "/usr/bin/openssl speed -evp aes-128-cbc" dtrace: description 'pid$target::*yf*:entry' matched 101 probes . . . dtrace: pid 2029 has exited libcrypto.so.1.0.0 ENGINE_load_t4 1 libcrypto.so.1.0.0 t4_DH 1 libcrypto.so.1.0.0 t4_DSA 1 libcrypto.so.1.0.0 t4_RSA 1 libcrypto.so.1.0.0 t4_destroy 1 libcrypto.so.1.0.0 t4_free_aes_ctr_NIDs 1 libcrypto.so.1.0.0 t4_init 1 libcrypto.so.1.0.0 t4_add_NID 3 libcrypto.so.1.0.0 t4_aes_expand128 5 libcrypto.so.1.0.0 t4_cipher_init_aes 5 libcrypto.so.1.0.0 t4_get_all_ciphers 6 libcrypto.so.1.0.0 t4_get_all_digests 59 libcrypto.so.1.0.0 t4_digest_final_sha1 65 libcrypto.so.1.0.0 t4_digest_init_sha1 65 libcrypto.so.1.0.0 t4_sha1_multiblock 126 libcrypto.so.1.0.0 t4_digest_update_sha1 261 libcrypto.so.1.0.0 t4_aes128_cbc_encrypt 1432979 libcrypto.so.1.0.0 t4_aes128_load_keys_for_encrypt 1432979 libcrypto.so.1.0.0 t4_cipher_do_aes_128_cbc 1432979 t-4 # dtrace -Z -n 'pid$target::*yf*:entry{ @[probemod, probefunc] = count();} pid$target::*yf*:entry,pid$target::*t4_*:entry{ @[probemod, probefunc] = count();}' \ -c "/usr/bin/openssl speed -engine pkcs11 -evp aes-128-cbc" dtrace: description 'pid$target::*yf*:entry' matched 101 probes engine "pkcs11" set. . . . dtrace: pid 2033 has exited libcrypto.so.1.0.0 ENGINE_load_t4 1 libcrypto.so.1.0.0 t4_DH 1 libcrypto.so.1.0.0 t4_DSA 1 libcrypto.so.1.0.0 t4_RSA 1 libcrypto.so.1.0.0 t4_destroy 1 libcrypto.so.1.0.0 t4_free_aes_ctr_NIDs 1 libcrypto.so.1.0.0 t4_get_all_ciphers 1 libcrypto.so.1.0.0 t4_get_all_digests 1 libsoftcrypto.so.1 rijndael_key_setup_enc_yf 1 libsoftcrypto.so.1 yf_aes_expand128 1 libcrypto.so.1.0.0 t4_add_NID 3 libsoftcrypto.so.1 yf_aes128_cbc_encrypt 1542330 libsoftcrypto.so.1 yf_aes128_load_keys_for_encrypt 1542330 So, as shown above the OpenSSL built-in t4 engine executes t4_* functions (which are hand-coded assembly executing the T4 AES instructions) and the OpenSSL pkcs11 engine executes *yf* functions. Programmatic Use of OpenSSL T4 engine The OpenSSL t4 engine is used automatically with the /usr/bin/openssl command line. Chi-Chang Lin also points out that if you're calling the OpenSSL API (libcrypto.so) from a program, you must call ENGINE_load_built_engines(), otherwise the built-in t4 engine will not be loaded. You do not call ENGINE_set_default(). That's because "openssl speed -evp" test calls ENGINE_load_built_engines() even though the "-engine" option wasn't specified. OpenSSL T4 engine Availability The OpenSSL t4 engine is available with Solaris 11 and 11.1. For Solaris 10 08/11 (U10), you need to use the OpenSSL pkcs311 engine. The OpenSSL t4 engine is distributed only with the version of OpenSSL distributed with Solaris (and not third-party or self-compiled versions of OpenSSL). The OpenSSL engine implements the AES cipher for Solaris 11, released 11/2011. For Solaris 11.1, released 11/2012, the OpenSSL engine adds optimization for the MD5, SHA-1, and SHA-2 hash algorithms, and DES-3. Although the T4 processor has Camillia and Kasumi block cipher instructions, these are not implemented in the OpenSSL T4 engine. The following charts may help view availability of optimizations. The first chart shows what's available with Solaris CLIs and APIs, the second chart shows what's available in Solaris OpenSSL. Native Solaris Optimization for SPARC T4 This table is shows Solaris native CLI and API support. As such, they are all available with the OpenSSL pkcs11 engine. CLIs: "openssl -engine pkcs11", encrypt(1), decrypt(1), mac(1), digest(1), MD5sum(1), SHA1sum(1), SHA224sum(1), SHA256sum(1), SHA384sum(1), SHA512sum(1) APIs: PKCS#11 library libpkcs11(3LIB) (incluDES Openssl pkcs11 engine), libMD(3LIB), and Solaris kernel modules AlgorithmSolaris 1008/11 (U10)Solaris 11Solaris 11.1 AES-ECB, AES-CBC, AES-CTR, AES-CBC AES-CFB128 XXX DES3-ECB, DES3-CBC, DES2-ECB, DES2-CBC, DES-ECB, DES-CBC XXX bignum Montgomery multiply (RSA, DSA) XXX MD5, SHA-1, SHA-256, SHA-384, SHA-512 XXX SHA-224 X ARCFOUR (RC4) X Solaris OpenSSL T4 Engine Optimization This table is for the Solaris OpenSSL built-in t4 engine. Algorithms listed above are also available through the OpenSSL pkcs11 engine. CLI: openssl(1openssl) APIs: openssl(5), engine(3openssl), evp(3openssl), libcrypto crypto(3openssl) AlgorithmSolaris 11Solaris 11SRU2Solaris 11.1 AES-ECB, AES-CBC, AES-CTR, AES-CBC AES-CFB128 XXX DES3-ECB, DES3-CBC, DES-ECB, DES-CBC X bignum Montgomery multiply (RSA, DSA) X MD5, SHA-1, SHA-256, SHA-384, SHA-512 XX SHA-224 X Source Code Availability Solaris Most of the T4 assembly code that called the new T4 crypto instructions was written by Ferenc Rákóczi of the Solaris Security group, with assistance from others. You can download the Solaris source for this and other parts of Solaris as a few zip files at the Oracle Download website. The relevant source files are generally under directories usr/src/common/crypto/{aes,arcfour,des,md5,modes,sha1,sha2}}/sun4v/. and usr/src/common/bignum/sun4v/. Solaris 11 binary is available from the Oracle Solaris 11 download website. OpenSSL t4 engine The source for the OpenSSL t4 engine, which is based on the Solaris source above, is viewable through the OpenGrok source code browser in directory src/components/openssl/openssl-1.0.0/engines/t4 . You can download the source from the same website or through Mercurial source code management, hg(1). Conclusion Oracle Solaris with SPARC T4 provides a rich set of accelerated cryptographic and hash algorithms. Using the latest update, Solaris 11.1, provides the best set of optimized algorithms, but alternatives are often available, sometimes slightly slower, for releases back to Solaris 10 08/11 (U10). Reference See also these earlier blogs. SPARC T4 OpenSSL Engine by myself, Dan Anderson (2011), discusses the Openssl T4 engine and reviews the SPARC T4 processor for the Solaris 11 release. Exciting Crypto Advances with the T4 processor and Oracle Solaris 11 by Valerie Fenwick (2011) discusses crypto algorithms that were optimized for the T4 processor with the Solaris 11 FCS (11/11) and Solaris 10 08/11 (U10) release. T4 Crypto Cheat Sheet by Stefan Hinker (2012) discusses how to make T4 crypto optimization available to various consumers (such as SSH, Java, OpenSSL, Apache, etc.) High Performance Security For Oracle Database and Fusion Middleware Applications using SPARC T4 (PDF, 2012) discusses SPARC T4 and its usage to optimize application security. Configuring Oracle iPlanet WebServer / Oracle Traffic Director to use crypto accelerators on T4-1 servers by Meena Vyas (2012)

Read the article

Extreme Optimization – Curves (Function Mapping) Part 1

- by JoshReuben

Overview · a curve is a functional map relationship between two factors (i.e. a function - However, the word function is a reserved word). · You can use the EO API to create common types of functions, find zeroes and calculate derivatives - currently supports constants, lines, quadratic curves, polynomials and Chebyshev approximations. · A function basis is a set of functions that can be combined to form a particular class of functions. The Curve class · the abstract base class from which all other curve classes are derived – it provides the following methods: · ValueAt(Double) - evaluates the curve at a specific point. · SlopeAt(Double) - evaluates the derivative · Integral(Double, Double) - evaluates the definite integral over a specified interval. · TangentAt(Double) - returns a Line curve that is the tangent to the curve at a specific point. · FindRoots() - attempts to find all the roots or zeroes of the curve. · A particular type of curve is defined by a Parameters property, of type ParameterCollection The GeneralCurve class · defines a curve whose value and, optionally, derivative and integrals, are calculated using arbitrary methods. A general curve has no parameters. · Constructor params: RealFunction delegates – 1 for the function, and optionally another 2 for the derivative and integral · If no derivative or integral function is supplied, they are calculated via the NumericalDifferentiation and AdaptiveIntegrator classes in the Extreme.Mathematics.Calculus namespace. // the function is 1/(1+x^2) private double f(double x) { return 1 / (1 + x*x); } // Its derivative is -2x/(1+x^2)^2 private double df(double x) { double y = 1 + x*x; return -2*x* / (y*y); } // The integral of f is Arctan(x), which is available from the Math class. var c1 = new GeneralCurve (new RealFunction(f), new RealFunction(df), new RealFunction(System.Math.Atan)); // Find the tangent to this curve at x=1 (the Line class is derived from Curve) Line l1 = c1.TangentAt(1);

Read the article

how this scaling down for css code is worked?

- by harris

this is a code for scaling down for css. i was wondering, how this worked. please someone explain to me part by part. thank you very much. /* ======================================================================== / / Copyright (C) 2000 - 2009 ND-Tech. Co., Ltd. / / All Rights Reserved. / / ======================================================================== / / Project : ScaleDown Created : 31-AUG-2009 / / File : main.c Contact : [email protected] / / ======================================================================== / / You are free to use or modify this code to the following restrictions: / / Acknowledge ND Tech. Co. Ltd. / / Or, put "Parts of code by ND Tech. Co., Ltd." / / Or, leave this header as it is. / / in somewhere in your code. / / ======================================================================== */ include "vm3224k.h" define CE0CTL *(volatile int *)(0x01800008) define CE2CTL *(volatile int *)(0x01800010) define SDCTL *(volatile int *)(0x01800018) define LED *(volatile short *)(0x90080000) // Definitions for async access(change as you wish) define WSU (2<<28) // Write Setup : 0-15 define WST (8<<22) // Write Strobe: 0-63 define WHD (2<<20) // Write Hold : 0-3 define RSU (2<<16) // Read Setup : 0-15 define TA (3<<14) // Turn Around : 0-3 define RST (8<<8) // Read Strobe : 0-63 define RHD (2<<0) // Read Hold : 0-3 define MTYPE (2<<4) /* EDMA Registers */ define PaRAM_OPT 0 // Options define PaRAM_SRC 1 // Source Address define PaRAM_CNT 2 // Frame count, Element count define PaRAM_DST 3 // Destination Address define PaRAM_IDX 4 // Frame index, Element index define PaRAM_RDL 5 // Element count reload, Link address define EDMA_CIPR *(volatile int *)0x01A0FFE4 // EDMA Channel interrupt pending low register define EDMA_CIER *(volatile int *)0x01A0FFE8 // EDMA Channel interrupt enable low register define EDMA_CCER *(volatile int *)0x01A0FFEC // EDMA Channel chain enable register define EDMA_ER *(volatile int *)0x01A0FFF0 // EDMA Event low register define EDMA_EER *(volatile int *)0x01A0FFF4 // EDMA Event enable low register define EDMA_ECR *(volatile int *)0x01A0FFF8 // EDMA Event clear low register define EDMA_ESR *(volatile int *)0x01A0FFFC // EDMA Event set low register define PRI (2<<29) // 1:High priority, 2:Low priority define ESIZE (1<<27) // 0:32bit, 1:16bit, 2:8bit, 3:reserved define DS2 (0<<26) // 1:2-Dimensional define SUM (0<<24) // 0:no update, 1:increment, 2:decrement, 3:by index define DD2 (0<<23) // 1:2-Dimensional define DUM (0<<21) // 0:no update, 1:increment, 2:decrement, 3:by index define TCINT (1<<20) // 0:disable, 1:enable define TCC (8<<16) // 4 bit code define LINK (0<<1) // 0:disable, 1:enable define FS (1<<0) // 0:element, 1:frame define OptionField_0 (PRI|ESIZE|DS2|SUM|DD2|DUM|TCINT|TCC|LINK|FS) define DD2_1 (1<<23) // 1:2-Dimensional define DUM_1 (1<<21) // 0:no update, 1:increment, 2:decrement, 3:by index define TCC_1 (9<<16) // 4 bit code define OptionField_1 (PRI|ESIZE|DS2|SUM|DD2_1|DUM_1|TCINT|TCC_1|LINK|FS) define TCC_2 (10<<16)// 4 bit code define OptionField_2 (PRI|ESIZE|DS2|SUM|DD2|DUM|TCINT|TCC_2|LINK|FS) define DS2_3 (1<<26) // 1:2-Dimensional define SUM_3 (1<<24) // 0:no update, 1:increment, 2:decrement, 3:by index define TCC_3 (11<<16)// 4 bit code define OptionField_3 (PRI|ESIZE|DS2_3|SUM_3|DD2|DUM|TCINT|TCC_3|LINK|FS) pragma DATA_SECTION ( lcd,".sdram" ) pragma DATA_SECTION ( cam,".sdram" ) pragma DATA_SECTION ( rgb,".sdram" ) pragma DATA_SECTION ( u,".sdram" ) extern cregister volatile unsigned int IER; extern cregister volatile unsigned int CSR; short camcode = 0x08000; short lcdcode = 0x00000; short lcd[2][240][320]; short cam[2][240][320]; short rgb[64][32][32]; short bufsel; int *Cevent,*Levent,*CLink,flag=1; unsigned char v[240][160],out_y[120][160]; unsigned char y[240][320],out_u[120][80]; unsigned char u[240][160],out_v[120][80]; void PLL6713() { int i; // CPU Clock Input : 50MHz *(volatile int *)(0x01b7c100) = *(volatile int *)(0x01b7c100) & 0xfffffffe; for(i=0;i<4;i++); *(volatile int *)(0x01b7c100) = *(volatile int *)(0x01b7c100) | 0x08; *(volatile int *)(0x01b7c114) = 0x08001; // 50MHz/2 = 25MHz *(volatile int *)(0x01b7c110) = 0x0c; // 25MHz * 12 = 300MHz *(volatile int *)(0x01b7c118) = 0x08000; // SYSCLK1 = 300MHz/1 = 300MHz *(volatile int *)(0x01b7c11c) = 0x08001; // SYSCLK2 = 300MHz/2 = 150MHz // Peripheral Clock *(volatile int *)(0x01b7c120) = 0x08003; // SYSCLK3 = 300MHz/4 = 75MHz // SDRAM Clock for(i=0;i<4;i++); *(volatile int *)(0x01b7c100) = *(volatile int *)(0x01b7c100) & 0xfffffff7; for(i=0;i<4;i++); *(volatile int *)(0x01b7c100) = *(volatile int *)(0x01b7c100) | 0x01; } unsigned short ybr_565(short y,short u,short v) { int r,g,b; b = y + 1772*(u-128)/1000; if (b<0) b=0; if (b>255) b=255; g = y - (344*(u-128) + 714*(v-128))/1000; if (g<0) g=0; if (g>255) g=255; r = y + 1402*(v-128)/1000; if (r<0) r=0; if (r>255) r=255; return ((r&0x0f8)<<8)|((g&0x0fc)<<3)|((b&0x0f8)>>3); } void yuyv2yuv(char *yuyv,char *y,char *u,char *v) { int i,j,dy,dy1,dy2,s; for (j=s=dy=dy1=dy2=0;j<240;j++) { for (i=0;i<320;i+=2) { u[dy1++] = yuyv[s++]; y[dy++] = yuyv[s++]; v[dy2++] = yuyv[s++]; y[dy++] = yuyv[s++]; } } } interrupt void c_int06(void) { if(EDMA_CIPR&0x800){ EDMA_CIPR = 0xffff; bufsel=(++bufsel&0x01); Cevent[PaRAM_DST] = (int)cam[(bufsel+1)&0x01]; Levent[PaRAM_SRC] = (int)lcd[(bufsel+1)&0x01]; EDMA_ESR = 0x80; flag=1; } } void main() { int i,j,k,y0,y1,v0,u0; bufsel = 0; CSR &= (~0x1); PLL6713(); // Initialize C6713 PLL CE0CTL = 0xffffbf33;// SDRAM Space CE2CTL = (WSU|WST|WHD|RSU|RST|RHD|MTYPE); SDCTL = 0x57115000; vm3224init(); // Initialize vm3224k2 vm3224rate(1); // Set frame rate vm3224bl(15); // Set backlight VM3224CNTL = VM3224CNTL&0xffff | 0x2; // vm3224 interrupt enable for (k=0;k<64;k++) // Create RGB565 lookup table for (i=0;i<32;i++) for (j=0;j<32;j++) rgb[k][i][j] = ybr_565(k<<2,i<<3,j<<3); Cevent = (int *)(0x01a00000 + 24 * 7); Cevent[PaRAM_OPT] = OptionField_0; Cevent[PaRAM_SRC] = (int)&camcode; Cevent[PaRAM_CNT] = 1; Cevent[PaRAM_DST] = (int)&VM3224ADDH; Cevent = (int *)(0x01a00000 + 24 * 8); Cevent[PaRAM_OPT] = OptionField_1; Cevent[PaRAM_SRC] = (int)&VM3224DATA; Cevent[PaRAM_CNT] = (239<<16)|320; Cevent[PaRAM_DST] = (int)cam[bufsel]; Cevent[PaRAM_IDX] = 0; Levent = (int *)(0x01a00000 + 24 * 9); Levent[PaRAM_OPT] = OptionField_2; Levent[PaRAM_SRC] = (int)&lcdcode; Levent[PaRAM_CNT] = 1; Levent[PaRAM_DST] = (int)&VM3224ADDH; Levent = (int *)(0x01a00000 + 24 * 10); Levent[PaRAM_OPT] = OptionField_3; Levent[PaRAM_SRC] = (int)lcd[bufsel]; Levent[PaRAM_CNT] = (239<<16)|320; Levent[PaRAM_DST] = (int)&VM3224DATA; Levent[PaRAM_IDX] = 0; IER = IER | (1<<6)|3; CSR = CSR | 0x1; EDMA_CCER = (1<<8)|(1<<9)|(1<<10); EDMA_CIER = (1<<11); EDMA_CIPR = 0xffff; EDMA_ESR = 0x80; while (1) { if(flag) { // LED = 0; yuyv2yuv((char *)cam[bufsel],(char *)y,(char *)u,(char *)v); for(j=0;j<240;j++) for(i=0;i<320;i++) lcd[bufsel][j][i]=0; for(j=0;j<240;j+=2) for(i=0;i<320;i+=2) out_y[j>>1][i>>1]=(y[j][i]+y[j][i+1]+y[j+1][i]+y[j+1][i+1])>>2; for(j=0;j<240;j+=2) for(i=0;i<160;i+=2) { out_u[j>>1][i>>1]=(u[j][i]+u[j][i+1]+u[j+1][i]+u[j+1][i+1])>>2; out_v[j>>1][i>>1]=(v[j][i]+v[j][i+1]+v[j+1][i]+v[j+1][i+1])>>2; } for (j=0;j<120;j++) for (i=0;i<160;i+=2) { y0 = out_y[j][i]>>2; u0 = out_u[j][i>>1]>>3; v0 = out_v[j][i>>1]>>3; y1 = out_y[j][i+1]>>2; lcd[bufsel][j+60][i+80]=rgb[y0][u0][v0]; lcd[bufsel][j+60][i+81]=rgb[y1][u0][v0]; } flag=0; // LED = 1; } } }

Read the article

Ubuntu 11.10 - Everytime i am trying to connect to my box using SSH, its failing not connecting

- by YumYumYum

From any other PC doing SSH to my Ubuntu 11.10,is failing. Even the SSH is running: Other PC: retrying over and over $ ping 192.168.0.128 PING 192.168.0.128 (192.168.0.128) 56(84) bytes of data. From 192.168.0.226 icmp_seq=1 Destination Host Unreachable From 192.168.0.226 icmp_seq=2 Destination Host Unreachable From 192.168.0.226 icmp_seq=3 Destination Host Unreachable From 192.168.0.226 icmp_seq=4 Destination Host Unreachable $ sudo service iptables stop Stopping iptables (via systemctl): [ OK ] $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] Connection closed by 192.168.0.128 $ ssh [email protected] [email protected]'s password: Connection closed by UNKNOWN $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host Follow up: -- checked cable -- using cable tester and other detectors -- no problem found in cable -- used random 10 cables -- adapter is not broken -- checked it using circuit tester by opening the system (card is new so its not network adapter card problem) -- leds are OK showing -- used LiveCD and did same ping test was having same problem -- disabled ipv6 100% to make sure its not the cause -- disabled iptables 100% so its also not the issue -- some more info $ sudo killall dnsmasq -- did not solved the problem -- -- like many other Q/A was suggesting this same --- $ iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination $ netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 $ ssh -vvv [email protected] OpenSSH_5.6p1, OpenSSL 1.0.0j-fips 10 May 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 192.168.0.128 [192.168.0.128] port 22. debug1: Connection established. debug3: Not a RSA1 key file /home/sun/.ssh/id_rsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/sun/.ssh/id_rsa type 1 debug1: identity file /home/sun/.ssh/id_rsa-cert type -1 debug1: identity file /home/sun/.ssh/id_dsa type -1 debug1: identity file /home/sun/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-7ubuntu1 debug1: match: OpenSSH_5.8p1 Debian-7ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 118/256 debug2: bits set: 539/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: match line 139 debug1: Host '192.168.0.128' is known and matches the RSA host key. debug1: Found key in /home/sun/.ssh/known_hosts:139 debug2: bits set: 544/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/sun/.ssh/id_rsa (0x213db960) debug2: key: /home/sun/.ssh/id_dsa ((nil)) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/sun/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/sun/.ssh/id_dsa debug3: no such identity: /home/sun/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password [email protected]'s password: debug3: packet_send2: adding 64 (len 60 padlen 4 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). Authenticated to 192.168.0.128 ([192.168.0.128]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env XDG_SESSION_ID debug3: Ignored env HOSTNAME debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE_PID debug3: Ignored env IMSETTINGS_INTEGRATE_DESKTOP debug3: Ignored env GPG_AGENT_INFO debug3: Ignored env TERM debug3: Ignored env HARDWARE_PLATFORM debug3: Ignored env SHELL debug3: Ignored env DESKTOP_STARTUP_ID debug3: Ignored env HISTSIZE debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env GJS_DEBUG_OUTPUT debug3: Ignored env WINDOWID debug3: Ignored env GNOME_KEYRING_CONTROL debug3: Ignored env QTDIR debug3: Ignored env QTINC debug3: Ignored env GJS_DEBUG_TOPICS debug3: Ignored env IMSETTINGS_MODULE debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env USERNAME debug3: Ignored env SESSION_MANAGER debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE debug3: Ignored env PATH debug3: Ignored env MAIL debug3: Ignored env DESKTOP_SESSION debug3: Ignored env QT_IM_MODULE debug3: Ignored env PWD debug1: Sending env XMODIFIERS = @im=none debug2: channel 0: request env confirm 0 debug1: Sending env LANG = en_US.utf8 debug2: channel 0: request env confirm 0 debug3: Ignored env KDE_IS_PRELINKED debug3: Ignored env GDM_LANG debug3: Ignored env KDEDIRS debug3: Ignored env GDMSESSION debug3: Ignored env SSH_ASKPASS debug3: Ignored env HISTCONTROL debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env GDL_PATH debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env QTLIB debug3: Ignored env CVS_RSH debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env WINDOWPATH debug3: Ignored env XDG_RUNTIME_DIR debug3: Ignored env DISPLAY debug3: Ignored env G_BROKEN_FILENAMES debug3: Ignored env COLORTERM debug3: Ignored env XAUTHORITY debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_status_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_status_confirm: type 99 id 0 debug2: shell request accepted on channel 0 Welcome to Ubuntu 11.10 (GNU/Linux 3.0.0-12-generic x86_64) * Documentation: https://help.ubuntu.com/ 297 packages can be updated. 92 updates are security updates. New release '12.04 LTS' available. Run 'do-release-upgrade' to upgrade to it. Last login: Fri Jun 8 07:45:15 2012 from 192.168.0.226 sun@SystemAX51:~$ ping 19<--------Lost connection again-------------- Tail follow: -- dmesg is showing a very abnormal logs, like Ubuntu is automatically bringing the eth0 up, where eth0 is getting also auto down. [ 2025.897511] r8169 0000:02:00.0: eth0: link up [ 2029.347649] r8169 0000:02:00.0: eth0: link up [ 2030.775556] r8169 0000:02:00.0: eth0: link up [ 2038.242203] r8169 0000:02:00.0: eth0: link up [ 2057.267801] r8169 0000:02:00.0: eth0: link up [ 2062.871770] r8169 0000:02:00.0: eth0: link up [ 2082.479712] r8169 0000:02:00.0: eth0: link up [ 2285.630797] r8169 0000:02:00.0: eth0: link up [ 2308.417640] r8169 0000:02:00.0: eth0: link up [ 2480.948290] r8169 0000:02:00.0: eth0: link up [ 2824.884798] r8169 0000:02:00.0: eth0: link up [ 3030.022183] r8169 0000:02:00.0: eth0: link up [ 3306.587353] r8169 0000:02:00.0: eth0: link up [ 3523.566881] r8169 0000:02:00.0: eth0: link up [ 3619.839585] r8169 0000:02:00.0: eth0: link up [ 3682.154393] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3899.866854] r8169 0000:02:00.0: eth0: link up [ 4723.978269] r8169 0000:02:00.0: eth0: link up [ 4807.415682] r8169 0000:02:00.0: eth0: link up [ 5101.865686] r8169 0000:02:00.0: eth0: link up How do i fix it? -- http://ubuntuforums.org/showthread.php?t=1959794 -- apt-get install openipml openhpi-plugin-ipml

Read the article

Issue 15: SVP Focus

- by rituchhibber

SVP FOCUS FOCUS -- Chris Baker SVP Oracle Worldwide ISV-OEM-Java Sales Chris Baker is the Global Head of ISV/OEM Sales responsible for working with ISV/OEM partners to maximise Oracle's business through those partners, whilst maximising those partners’ business to their end users. Chris works with partners, customers, innovators, investors and employees to develop innovative business solutions using Oracle products, services and skills. RESOURCES -- Oracle PartnerNetwork (OPN) OPN Solutions Catalog Oracle Exastack Program Oracle Exastack Optimized Oracle Cloud Computing Oracle Engineered Systems Oracle and Java SUBSCRIBE FEEDBACK PREVIOUS ISSUES "By taking part in marketing activities, our partners accelerate their sales cycles." -- Firstly, could you please explain Oracle's current strategy for ISV partners, globally and in EMEA? Oracle customers use independent software vendor (ISV) applications to run their businesses. They use them to generate revenue and to fulfil obligations to their own customers. Our strategy is very straight-forward. We want all of our ISV partners and OEMs to concentrate on the things that they do the best—building applications to meet the unique industry and functional requirements of their customer. We want to ensure that we deliver a best-in-class application platform so ISVs are free to concentrate their effort on their application functionality and user experience We invest over four billion dollars in research and development every year, and we want our ISVs to benefit from all of that investment in operating systems, virtualisation, databases, middleware, engineered systems, and other hardware. By doing this, we help them to reduce their costs, gain more consistency and agility for quicker implementations, and also rapidly differentiate themselves from other application vendors. It's all about simplification because we believe that around 25 to 30 percent of the development costs incurred by many ISVs are caused by customising infrastructure and have nothing to do with their applications. Our strategy is to enable our ISV partners to standardise their application platform using engineered architecture, so they can write once to the Oracle stack and deploy seamlessly in the cloud, on-premise, or in hybrid deployments. It's really important that architecture is the same in order to keep cost and time overheads at a minimum, so we provide standardisation and an environment that enables our ISVs to concentrate on the core business that makes them the most money and brings them success. How do you believe this strategy is helping the ISVs to work hand-in-hand with Oracle to ensure that end customers get the industry-leading solutions that they need? We work with our ISVs not just to help them be successful, but also to help them market themselves. We have something called the 'Oracle Exastack Ready Program', which enables ISVs to publicise themselves as 'Ready' to run the core software platforms that run on Oracle's engineered systems including Exadata and Exalogic. So, for example, they can become 'Database Ready' which means that they use the latest version of Oracle Database and therefore can run their application without modification on Exadata or the Oracle Database Appliance. Alternatively, they can become WebLogic Ready, Oracle Linux Ready and Oracle Solaris Ready which means they run on the latest release and therefore can run their application, with no new porting work, on Oracle Exalogic. Those 'Ready' logos are important in helping ISVs advertise to their customers that they are using the latest technologies which have been fully tested. We now also have Exadata Ready and Exalogic Ready programmes which allow ISVs to promote the certification of their applications on these platforms. This highlights these partners to Oracle customers as having solutions that run fluently on the Oracle Exadata Database Machine, the Oracle Exalogic Elastic Cloud or one of our other engineered systems. This makes it easy for customers to identify solutions and provides ISVs with an avenue to connect with Oracle customers who are rapidly adopting engineered systems. We have also taken this programme to the next level in the shape of 'Oracle Exastack Optimized' for partners whose applications run best on the Oracle stack and have invested the time to fully optimise application performance. We ensure that Exastack Optimized partner status is promoted and supported by press releases, and we help our ISVs go to market and differentiate themselves through the use of our technology and the standardisation it delivers. To date we have had several hundred organisations successfully work through our Exastack Optimized programme. How does Oracle's strategy of offering pre-integrated open platform software and hardware allow ISVs to bring their products to market more quickly? One of the problems for many ISVs is that they have to think very carefully about the technology on which their solutions will be deployed, particularly in the cloud or hosted environments. They have to think hard about how they secure these environments, whether the concern is, for example, middleware, identity management, or securing personal data. If they don't use the technology that we build-in to our products to help them to fulfil these roles, they then have to build it themselves. This takes time, requires testing, and must be maintained. By taking advantage of our technology, partners will now know that they have a standard platform. They will know that they can confidently talk about implementation being the same every time they do it. Very large ISV applications could once take a year or two to be implemented at an on-premise environment. But it wasn't just the configuration of the application that took the time, it was actually the infrastructure - the different hardware configurations, operating systems and configurations of databases and middleware. Now we strongly believe that it's all about standardisation and repeatability. It's about making sure that our partners can do it once and are then able to roll it out many different times using standard componentry. What actions would you recommend for existing ISV partners that are looking to do more business with Oracle and its customer base, not only to maximise benefits, but also to maximise partner relationships? My team, around the world and in the EMEA region, is available and ready to talk to any of our ISVs and to explore the possibilities together. We run programmes like 'Excite' and 'Insight' to help us to understand how we can help ISVs with architecture and widen their environments. But we also want to work with, and look at, new opportunities - for example, the Machine-to-Machine (M2M) market or 'The Internet of Things'. Over the next few years, many millions, indeed billions of devices will be collecting massive amounts of data and communicating it back to the central systems where ISVs will be running their applications. The only way that our partners will be able to provide a single vendor 'end-to-end' solution is to use Oracle integrated systems at the back end and Java on the 'smart' devices collecting the data—a complete solution from device to data centre. So there are huge opportunities to work closely with our ISVs, using Oracle's complete M2M platform, to provide the infrastructure that enables them to extract maximum value from the data collected. If any partners don't know where to start or who to contact, then they can contact me directly at [email protected] or indeed any of our teams across the EMEA region. We want to work with ISVs to help them to be as successful as they possibly can through simplification and speed to market, and we also want all of the top ISVs in the world based on Oracle. What opportunities are immediately opened to new ISV partners joining the OPN? As you know OPN is very, very important. New members will discover a huge amount of content that instantly becomes accessible to them. They can access a wealth of no-cost training and enablement materials to build their expertise in Oracle technology. They can download Oracle software and use it for development projects. They can help themselves become more competent by becoming part of a true community and uncovering new opportunities by working with Oracle and their peers in the Oracle Partner Network. As well as publishing massive amounts of information on OPN, we also hold our global Oracle OpenWorld event, at which partners play a huge role. This takes place at the end of September and the beginning of October in San Francisco. Attending ISV partners have an unrivalled opportunity to contribute to elements such as the OpenWorld / OPN Exchange, at which they can talk to other partners and really begin thinking about how they can move their businesses on and play key roles in a very large ecosystem which revolves around technology and standardisation. Finally, are there any other messages that you would like to share with the Oracle ISV community? The crucial message that I always like to reinforce is architecture, architecture and architecture! The key opportunities that ISVs have today revolve around standardising their architectures so that they can confidently think: "I will I be able to do exactly the same thing whenever a customer is looking to deploy on-premise, hosted or in the cloud". The right architecture is critical to being competitive and to really start changing the game. We want to help our ISV partners to do just that; to establish standard architecture and to seize the opportunities it opens up for them. New market opportunities like M2M are enormous - just look at how many devices are all around you right now. We can help our partners to interface with these devices more effectively while thinking about their entire ecosystem, rather than just the piece that they have traditionally focused upon. With standardised architecture, we can help people dramatically improve their speed, reach, agility and delivery of enhanced customer satisfaction and value all the way from the Java side to their centralised systems. All Oracle ISV partners must take advantage of these opportunities, which is why Oracle will continue to invest in and support them. Oracle OpenWorld 2010 Whether you attended Oracle OpenWorld 2009 or not, don't forget to save the date now for Oracle OpenWorld 2010. The event will be held a little earlier next year, from 19th-23rd September, so please don't miss out. With thousands of sessions and hundreds of exhibits and demos already lined up, there's no better place to learn how to optimise your existing systems, get an inside line on upcoming technology breakthroughs, and meet with your partner peers, Oracle strategists and even the developers responsible for the products and services that help you get better results for your end customers. Register Now for Oracle OpenWorld 2010! Perhaps you are interested in learning more about Oracle OpenWorld 2010, but don't wish to register at this time? Great! Please just enter your contact information here and we will contact you at a later date. How to Exhibit at Oracle OpenWorld 2010 Sponsorship Opportunities at Oracle OpenWorld 2010 Advertising Opportunities at Oracle OpenWorld 2010 -- Back to the welcome page

Read the article

Everytime i am trying to connect to my box using SSH, its failing not connecting

- by YumYumYum

From any other PC doing SSH to my Ubuntu 11.10,is failing. My network setup: Telenet ISP (Belgium) Fiber cable < RJ45 cable straight to Ubuntu PC Even the SSH is running: Other PC: retrying over and over $ ping 192.168.0.128 PING 192.168.0.128 (192.168.0.128) 56(84) bytes of data. From 192.168.0.226 icmp_seq=1 Destination Host Unreachable From 192.168.0.226 icmp_seq=2 Destination Host Unreachable From 192.168.0.226 icmp_seq=3 Destination Host Unreachable From 192.168.0.226 icmp_seq=4 Destination Host Unreachable $ sudo service iptables stop Stopping iptables (via systemctl): [ OK ] $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] Connection closed by 192.168.0.128 $ ssh [email protected] [email protected]'s password: Connection closed by UNKNOWN $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host Follow up: -- checked cable -- using cable tester and other detectors -- no problem found in cable -- used random 10 cables -- adapter is not broken -- checked it using circuit tester by opening the system (card is new so its not network adapter card problem) -- leds are OK showing -- used LiveCD and did same ping test was having same problem -- disabled ipv6 100% to make sure its not the cause -- disabled iptables 100% so its also not the issue -- some more info $ nmap 192.168.0.128 Starting Nmap 5.50 ( http://nmap.org ) at 2012-06-08 19:11 CEST Nmap scan report for 192.168.0.128 Host is up (0.00045s latency). All 1000 scanned ports on 192.168.0.128 are closed (842) or filtered (158) Nmap done: 1 IP address (1 host up) scanned in 6.86 seconds ubuntu@ubuntu:~$ netstat -aunt | head Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN tcp 0 1 192.168.0.128:58616 74.125.132.99:80 FIN_WAIT1 tcp 0 0 192.168.0.128:56749 199.7.57.72:80 ESTABLISHED tcp 0 1 192.168.0.128:58614 74.125.132.99:80 FIN_WAIT1 tcp 0 0 192.168.0.128:49916 173.194.65.113:443 ESTABLISHED tcp 0 1 192.168.0.128:45699 64.34.119.101:80 SYN_SENT tcp 0 0 192.168.0.128:48404 64.34.119.12:80 ESTABLISHED tcp 0 0 192.168.0.128:54161 67.201.31.70:80 TIME_WAIT $ sudo killall dnsmasq -- did not solved the problem -- -- like many other Q/A was suggesting this same --- $ iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination $ netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 $ ssh -vvv [email protected] OpenSSH_5.6p1, OpenSSL 1.0.0j-fips 10 May 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 192.168.0.128 [192.168.0.128] port 22. debug1: Connection established. debug3: Not a RSA1 key file /home/sun/.ssh/id_rsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/sun/.ssh/id_rsa type 1 debug1: identity file /home/sun/.ssh/id_rsa-cert type -1 debug1: identity file /home/sun/.ssh/id_dsa type -1 debug1: identity file /home/sun/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-7ubuntu1 debug1: match: OpenSSH_5.8p1 Debian-7ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 118/256 debug2: bits set: 539/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: match line 139 debug1: Host '192.168.0.128' is known and matches the RSA host key. debug1: Found key in /home/sun/.ssh/known_hosts:139 debug2: bits set: 544/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/sun/.ssh/id_rsa (0x213db960) debug2: key: /home/sun/.ssh/id_dsa ((nil)) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/sun/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/sun/.ssh/id_dsa debug3: no such identity: /home/sun/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password [email protected]'s password: debug3: packet_send2: adding 64 (len 60 padlen 4 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). Authenticated to 192.168.0.128 ([192.168.0.128]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env XDG_SESSION_ID debug3: Ignored env HOSTNAME debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE_PID debug3: Ignored env IMSETTINGS_INTEGRATE_DESKTOP debug3: Ignored env GPG_AGENT_INFO debug3: Ignored env TERM debug3: Ignored env HARDWARE_PLATFORM debug3: Ignored env SHELL debug3: Ignored env DESKTOP_STARTUP_ID debug3: Ignored env HISTSIZE debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env GJS_DEBUG_OUTPUT debug3: Ignored env WINDOWID debug3: Ignored env GNOME_KEYRING_CONTROL debug3: Ignored env QTDIR debug3: Ignored env QTINC debug3: Ignored env GJS_DEBUG_TOPICS debug3: Ignored env IMSETTINGS_MODULE debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env USERNAME debug3: Ignored env SESSION_MANAGER debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE debug3: Ignored env PATH debug3: Ignored env MAIL debug3: Ignored env DESKTOP_SESSION debug3: Ignored env QT_IM_MODULE debug3: Ignored env PWD debug1: Sending env XMODIFIERS = @im=none debug2: channel 0: request env confirm 0 debug1: Sending env LANG = en_US.utf8 debug2: channel 0: request env confirm 0 debug3: Ignored env KDE_IS_PRELINKED debug3: Ignored env GDM_LANG debug3: Ignored env KDEDIRS debug3: Ignored env GDMSESSION debug3: Ignored env SSH_ASKPASS debug3: Ignored env HISTCONTROL debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env GDL_PATH debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env QTLIB debug3: Ignored env CVS_RSH debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env WINDOWPATH debug3: Ignored env XDG_RUNTIME_DIR debug3: Ignored env DISPLAY debug3: Ignored env G_BROKEN_FILENAMES debug3: Ignored env COLORTERM debug3: Ignored env XAUTHORITY debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_status_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_status_confirm: type 99 id 0 debug2: shell request accepted on channel 0 Welcome to Ubuntu 11.10 (GNU/Linux 3.0.0-12-generic x86_64) * Documentation: https://help.ubuntu.com/ 297 packages can be updated. 92 updates are security updates. New release '12.04 LTS' available. Run 'do-release-upgrade' to upgrade to it. Last login: Fri Jun 8 07:45:15 2012 from 192.168.0.226 sun@SystemAX51:~$ ping 19<--------Lost connection again-------------- Tail follow: -- dmesg is showing a very abnormal logs, like Ubuntu is automatically bringing the eth0 up, where eth0 is getting also auto down. [ 2025.897511] r8169 0000:02:00.0: eth0: link up [ 2029.347649] r8169 0000:02:00.0: eth0: link up [ 2030.775556] r8169 0000:02:00.0: eth0: link up [ 2038.242203] r8169 0000:02:00.0: eth0: link up [ 2057.267801] r8169 0000:02:00.0: eth0: link up [ 2062.871770] r8169 0000:02:00.0: eth0: link up [ 2082.479712] r8169 0000:02:00.0: eth0: link up [ 2285.630797] r8169 0000:02:00.0: eth0: link up [ 2308.417640] r8169 0000:02:00.0: eth0: link up [ 2480.948290] r8169 0000:02:00.0: eth0: link up [ 2824.884798] r8169 0000:02:00.0: eth0: link up [ 3030.022183] r8169 0000:02:00.0: eth0: link up [ 3306.587353] r8169 0000:02:00.0: eth0: link up [ 3523.566881] r8169 0000:02:00.0: eth0: link up [ 3619.839585] r8169 0000:02:00.0: eth0: link up [ 3682.154393] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3899.866854] r8169 0000:02:00.0: eth0: link up [ 4723.978269] r8169 0000:02:00.0: eth0: link up [ 4807.415682] r8169 0000:02:00.0: eth0: link up [ 5101.865686] r8169 0000:02:00.0: eth0: link up How do i fix it? -- http://ubuntuforums.org/showthread.php?t=1959794 $ apt-get install openipml openhpi-plugin-ipml $ openipmish > help redisp_cmd on|off > redisp_cmd on redisp set Final follow up: Step 1: BUG for network card driver r8169 Step 2: get the latest build version http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=4&PFid=4&Level=5&Conn=4&DownTypeID=3&GetDown=false&Downloads=true#RTL8110SC(L) Step 3: build / make $ cd /var/tmp/driver $ tar xvfj r8169.tar.bz2 $ make clean modules && make install $ rmmod r8169 $ depmod $ cp src/r8169.ko /lib/modules/3.xxxx/kernel/drivers/net/r8169.ko $ modprobe r8169 $ update-initramfs -u $ init 6 Voila!!

Read the article

Oracle OpenWorld and JavaOne 2014 - Early Bird Registration

- by Cinzia Mascanzoni

#OOW14 Sponsor Oracle OpenWorld » Exhibit at Oracle OpenWorld » Don’t Miss Out on Early Bird Savings Oracle OpenWorld 2014 is several months away. So why register now, partners? Savings. And availability. Register early and you can secure your spot and hotel room for the world’s largest business and technology conference. Plus, you’ll save on sessions, keynotes, entertainment, and networking opportunities. Register Now Just What You'd Expect from Oracle OpenWorld. And More. You’re probably attending the conference for the IT programs and networking opportunities. You’ll find a wide selection. And that’s just the start. Because Oracle OpenWorld is more than just IT. Check out and benefit from all the conference activities, including benefits specific for Oracle PartnerNetwork (OPN) at OPN Central @ OpenWorld, including: Oracle OpenWorld Keynote OPN Keynote OPN General Sessions OPN AfterDark Reception OPN Central @ OpenWorld OPN Lounge Access Save Even More As a Group Are you planning to register five or more people for Oracle OpenWorld 2014? If so, take advantage of our Group Pass Purchase. Register a Group Today! SponsorOracle OpenWorld Get maximum exposure for your brand Find out how » Exhibit atOracle OpenWorld Meet your customers and prospects face-to-face. Reserve a booth now » Register for Oracle OpenWorld Today Learn more about Oracle OpenWorld #OOW14 Copyright © 2014, Oracle Corporation and/or its affiliates. All rights reserved. Contact Us | Legal Notices and Terms of Use | Privacy Statement

Read the article

Live Oracle AppAdvantage Webcast in APAC: Register Today

- by Tanu Sood

How Oracle Applications Customers can Extend the Value of their Investments How Oracle Applications Customers can Extend the Value of their Investments Oracle AppAdvantage is an exciting new initiative for Oracle enterprise application customers including E-Business Suite, PeopleSoft, JD Edwards, and Siebel. Oracle AppAdvantage provides strategies to help applications customers simplify, differentiate and innovate their investments through a pace layered architecture that can adjust with business requirements.Whether your organization is extending your applications to mobile devices, building a customer self-service portal, taking applications to the cloud, integrating applications with your other business critical applications or securely extending them to serve your specific needs, you can take the extension or customization work out of the applications and seamlessly extend with Oracle Fusion Middleware technologies as required. This webcast will discuss: Strategies to help applications customers simplify, differentiate and innovate their investments through a pace layered architecture How to get started and implementation use cases with customer examples Register today for this webcast on November 6. Can't wait until the Live Webcast? and ask him a question! If you are facing problems with registration or would like further information please email us at [email protected] -- For any questions on Oracle, our events and products please call or send us an email. Date Wednesday, 6th November 2013 Time Mumbai 10:30 a.m. (GMT +5:30) Singapore 1:00 p.m. (GMT +8:00) Sydney 4:00 p.m. (GMT +11:00) -- The duration of this Webcast is 60 minutes. -- Contact Us | Legal Notices | Privacy Copyright © 2013, Oracle and/or its affiliates. All rights reserved.

Read the article

Attempting to dual boot Ubuntu and Windows 7 on Sony Vaio with Insyde H2O BIOS

- by zach

My situation is the same that is addressed here Sony VAIO with Insyde H2O EFI bios will not boot into GRUB EFI and here http://www.hackourlife.com/sony-vaio-with-insyde-h2o-efi-bios-ubuntu-12-04-dual-boot I tried to install Ubuntu 12.04 from the Live CD alongside my current Windows 7. I have to switch my BIOS to legacy mode in order to boot from CD. If I were to do a normal installation and remain in legacy mode, the BIOS will display "operating system not found". If I switch back then the BIOS just boots to windows. To solve the problem, I tried following the steps in the previous two articles. My drive is partitioned as: sda1 FAT32 Location of Windows EFI files (flagged as boot in Ubuntu install) sda2 unknown sda3 NFTS Windows C: sda4 ext4 Ubuntu root sda5 swap sda6 ext4 Ubuntu home I was a little confused by the requirement in the second article to "be careful to install Grub bootloader in /dev/sda3" In my case, the relevant partition is sda1. I have tried three things: setting the sda1 mount point as /boot, as /boot/efi, and as the special reserved grub partition. In each install I indicated that grub should be installed in sda1. After each install I reboot to the live CD and look in the sda1. I see EFI/Boot and EFI/Windows, but no EFI/Ubuntu and consequently no grubx64.efi. I understand the recommended procedure of moving grubx64.efi into the EFI/Boot directory and replacing the present bootx64.efi file, but I see no grubx64.efi and I don't know where it should be.

Read the article

How do I align my partition table properly?

- by Jorge Castro

I am in the process of building my first RAID5 array. I've used mdadm to create the following set up: root@bondigas:~# mdadm --detail /dev/md1 /dev/md1: Version : 00.90 Creation Time : Wed Oct 20 20:00:41 2010 Raid Level : raid5 Array Size : 5860543488 (5589.05 GiB 6001.20 GB) Used Dev Size : 1953514496 (1863.02 GiB 2000.40 GB) Raid Devices : 4 Total Devices : 4 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Wed Oct 20 20:13:48 2010 State : clean, degraded, recovering Active Devices : 3 Working Devices : 4 Failed Devices : 0 Spare Devices : 1 Layout : left-symmetric Chunk Size : 64K Rebuild Status : 1% complete UUID : f6dc829e:aa29b476:edd1ef19:85032322 (local to host bondigas) Events : 0.12 Number Major Minor RaidDevice State 0 8 16 0 active sync /dev/sdb 1 8 32 1 active sync /dev/sdc 2 8 48 2 active sync /dev/sdd 4 8 64 3 spare rebuilding /dev/sde While that's going I decided to format the beast with the following command: root@bondigas:~# mkfs.ext4 /dev/md1p1 mke2fs 1.41.11 (14-Mar-2010) /dev/md1p1 alignment is offset by 63488 bytes. This may result in very poor performance, (re)-partitioning suggested. Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=16 blocks, Stripe width=48 blocks 97853440 inodes, 391394047 blocks 19569702 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 11945 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848 Writing inode tables: ^C 27/11945 root@bondigas:~# ^C I am unsure what to do about "/dev/md1p1 alignment is offset by 63488 bytes." and how to properly partition the disks to match so I can format it properly.

Read the article

Changing the connection factory JNDI dynamically in Ftp Adapter

- by [email protected]

Consider a usecase where you need to send the same file over to five different ftp servers. The first thought that might come to mind is to create five FtpAdapter references one for each connection-factory location. However, this is not the most optimal approach and this is exactly where "Dynamic Partner Links" come into play in 11g. If you're running the adapter in managed mode, it would require you to configure the connection factory JNDI in the appserver console for the FtpAdapter. In the sample below, I have mapped the connection-factory JNDI location "eis/Ftp/FtpAdapter" with the ftp server running on localhost. After you've configured the connection factory on your appserver, you will need to refer to the connection-factory JNDI in the jca artifact of your SCA process. In the example below, I've instructed the FTPOut reference to use the ftp server corresponding to "eis/Ftp/FtpAdapter". The good news is that you can change this connection-factory location dynamically using jca header properties in both BPEL as well as Mediator service engines. In order to do so, the business scenario involving BPEL or Mediator would be required to use a reserved jca header property "jca.jndi" as shown below. Similarly, for mediator, the mplan would look as shown below. Things to remember while using dynamic partner links: 1) The connection factories must be pre-configured on the SOA server. In our BPEL example above, both "eis/Ftp/FtpAdater1" and "eis/Ftp/FtpAdater2" must be configured in the weblogic deployment descriptor for the FtpAdapter prior to deploying the scenario. 2) Dynamic Partner Links are applicable to outbound invocations only.

Read the article

Slow dvd burning/reading speeds: how to solve

- by wouter205

I have a problem on which I'm struggling since i started using linux a year ago on my desktop, but still haven't found a solution for it. When reading or burning a dvd, the speeds are very slow (mostly under 1x) whilst I did selected the fastest speed in k3b. As such, it takes up to 40-50 minutes to burn one dvd! I read about enabling dma this post but it didn't help. This is the output for dmesg | grep -i dma > [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3527 pages used for memmap [ 0.000000] DMA32 zone: 254441 pages, LIFO batch:31 [ 0.000000] Policy zone: DMA32 [ 0.120356] pnp 00:01: [dma 4] [ 0.120968] pnp 00:05: [dma 2] [ 0.121421] pnp 00:06: [dma 3] [ 0.122617] pnp 00:0b: [dma 0 disabled] [ 0.852321] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe480 bmdma 0xe000 irq 19 [ 0.852325] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xe008 irq 19 [ 0.861633] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 0.861636] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.329411] ata1.00: ATA-7: Maxtor 6V250F0, VA111630, max UDMA/133 [ 1.345418] ata1.00: configured for UDMA/133 [ 1.820606] ata4.00: ATAPI: PHILIPS DVDR1660P1, P1.3, max UDMA/33 [ 1.820610] ata4.00: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled [ 1.820613] ata4.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node. [ 1.836681] ata4.00: configured for UDMA/33 [ 12.296600] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] reading the third and fourth last line, I assume there is indeed a problem with dma? edit: this question still is not solved. Could anyone come up with an other solution please? Thanks

Search Results

Search found 8410 results on 337 pages for 'hardware reserved'.

Page 140/337 | < Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147 | Next Page >

- by Bruce Eitman

- by katsumii

- by Rick Roth

- by Bruce Eitman

- by Gavin Stevens

- by David.Chu.ca

- by John Blumenauer

- by Bruce Eitman

- by Bruce Eitman

- by Jakub Narebski

- by Chris Hoffman

- by Werner Willemsens

- by danx

- by JoshReuben

- by harris

- by YumYumYum

- by rituchhibber

- by YumYumYum

- by Cinzia Mascanzoni

- by Tanu Sood

- by zach

- by Jorge Castro

- by [email protected]

- by wouter205

< Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147 | Next Page >