Search Results

Search found 12605 results on 505 pages for 'my settings'.

Page 140/505 | < Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >

  • How do I get the same dual-screen experience on my install as I had on the 12.04 Live CD?

    - by Alexander G
    I downloaded, burned to disc, and booted Ubuntu 12.04 Precise (I defected to Arch for a year when I got fed up of Natty). I was pleasantly surprised by both of my monitors working perfectly on there (needed to rearrange as my secondary monitor is to the left, however). So I installed. There's no recognition of the second monitor now, and it doesn't appear in the settings. I've also enabled the Nvidia driver. What do I do?

    Read the article

  • Speakers doesn't work properly on Ubuntu 12.10 but works fine on windows7

    - by giri
    I have recently upgraded my Ubuntu 12.04 to 12.10 version and find issues with my speakers as well as microphone.When I boot the system they doesn't work, but(don't know why) when I restart once or twice they work fine.There is no problem with my laptop(dell xps) as they work well on windows7. I have my sound settings as follows Hardware --- Built-in Audio 1 Outpu/1 Input Analog Stereo Duplex Input(Internal Microphone) & Output(Speakers) -----Built-in audio Analog Stereo Any suggestions to fix the problem??

    Read the article

  • Lost network interface after mac change

    - by Arturo Grc
    I'm using Ubuntu server 12.04 inside Virtualbox and everything was working as expected, but since I changed the mac address in Virtualbox network settings the network interface is not being recognized on Ubuntu. I don't remember the old mac address and everytime Ubuntu starts shows waiting for network configuration when I use ifconfig only appears lo (loopback device) and eth0 is lost, how can I fix this problem?

    Read the article

  • Should I install ubuntu on USB instead of HDD dual-boot?

    - by user2147243
    I had Ubuntu 12.04 installed as dual-boot OS on top of Vista on my laptop. Hacked the grub settings to default to Vista (instead of the default Ubuntu -- pain) on startup, and all was OK for occasional Ubuntu use for past 6 months. Then last week I got a strange message about 'lack of disk space' (~50MB free) when installing pxyplot, even though there was still about 6GB free disk space when I checked later. Then today the Ubuntu wouldn't load at all, and checking the HDD partitions in Vista it looked like the 15GB Ubuntu partition was now three smaller partitions! So, I got rid of those partitions and expanded the Vista partition to use the reclaimed space. Now can't restart ('grub rescue' appears and doesn't 'rescue' anything), so I'll have to do a boot recovery using a Vista installation CD. (Not a particularly user-friendly failure mode of the dual-boot installation!) I now have to decide to either a) try installing ubuntu on the HDD again, but don't want to stuff up my Vista ever again, as that is my most used OS, or b) install Ubuntu on a 16GB USB 3.0 stick. Apparently performance from USB won't be as good as from HDD, and running OS from USB stick does lots of r/w so the stick may fail after a few years! Perhaps installing Ubuntu on live USB and setup to then run in RAM would alleviate the performance/USB lifespan problems? If I create a live-USB for Ubuntu OS, will it boot off that when I restart the laptop with it plugged in? Or will I have to change the laptop setting for boot-order whenever I want to boot Ubuntu instead of Vista (that would be even more painful than the grub default boot order putting Ubuntu ahead of the existing Vista OS!) -- update: I recovered my Vista setup using Iolo SystemMechanic Disaster Recovery Tool, and created a bootable USB of Ubuntu 13.10 on an 8GB USB3.0 pendrive, with 4GB of 'persistence' to allow saving of settings, install some packages etc. It worked OK for a couple of test boots, but once I changed the time and desktop wallpaper, the next Ubuntu reboot crashed and I then couldn't get it to boot successfully. So I decided to install Ubuntu 12.04 LTS as a dual-boot again, but this time instead of partitioning the HDD and installing from an ISO DVD I used the wubi.exe tool to install Ubuntu as a dual-boot. Worked very well, although one oddity was that, despite asking how big the make the partition (20GB), the installed Ubuntu appears to be happily installed somewhere within the Vista NTFS file system (no partition shows up in Windows disk manager, and in Ubuntu disk management tool the entire 133 GB of HDD is showing, with ~40GB free space). A nice feature of installing the dual-boot using wubi is that the laptop now uses Windows boot manager on startup, with Vista as the default OS and Ubuntu happily listed as second on the list. So far so good.

    Read the article

  • Wired and Wireless Network Issues with PPPoE

    - by user9054
    down vote favorite Hi Friends, I have got this issue with Ubuntu 10.10. I have been with ubuntu 8.04 and then decided to try out ubuntu 10.10 . I booted with a LiveCD and was able to configure the wireless network painlessly using the livecd. So happily i installed ubuntu 10.10. As soon as ubuntu came up it detected the wireless network and i was able to assign a static IP to eth1 (i dont use DHCP option on my ADSL router) and enter a wap key and use pppoeconf to configure the dialer. The net was on and i was able to surf the net. All hunky dory so far. However on the next boot the fun started. It did not detect the wireless network. I could not see the network manager icon in the systray. I used ifconfig and saw that the entry for eth1 was missing. I used ifup eth1 and it said that eth1 was already up . Then i installed wifi-radar. Wifi-Radar detected the wireless network. I configured wifi-radar for the detected wireless network , set the wap driver as wext and used the manual IP settings. However on clicking connect wifi-radar started looking for a DHCP IP , needless to say it failed. For the love of god i cannot understand why wifi-radar is using DHCP when i have specified manual settings . Next i decided to use the wired network to surf the net looking for a solution . So i plugged in the network cable from my modem , it detected the plugged in connection , i configured eth0 , used pppoeconf and connected to the net. Then i foolishly decided to reboot my PC. And wonders of wonders , the same problem appeared. I cannot see eth0 in my ifconfig anymore. I used pon to start the dsl-provider connection and it said something about network error or something . Now my ifconfig shows only lo , both eth0 and eth1 have disappeared. Can anybody help me on this ? Is it a problem with ipv6 , if so how do you disable ipv6 on ubuntu 10.10 ? OR is this is a known issue with ubuntu 10.10 ? PS : 1) i tried linux mint 10 and had the same issue. On rebooting wireless network was not getting detected . 2) i have made myself the administrator so that there is no issue of rights or anything. Any help is appreciated.

    Read the article

  • Freeze after 'init-bottom' script before installation starts on a Lenovo G475

    - by NikitaBaksalyar
    I'm trying to install Ubuntu 11.04 x86 on a Lenovo G475 laptop (based on AMD Fusion), but installation freezes after loading ends on a splash screen. I've tried to run installation without quiet and splash parameters - but result is the same: installation freeze after running "init-bottom" script. I thought that it can be because of BIOS settings, but I've also tried to change them several times without any result.

    Read the article

  • Gnome-shell worskpace preview on dual screen

    - by martin
    I'have isntalled gnome3 and I have dual screens(laptop, monitor). Is it possible to see the other monitor in workspace preview in the gnome panel??? I only can see primary monitor, that's why i'm not able to move windows inside the second screen? I've tried to change some settings in dconf , but with no luck. I want to have it like this http://stephen.rees-carter.net/wp-content/uploads/2011/04/Unity-workspace-switcher.png Does anyone have a solution?

    Read the article

  • tring to edit brightness

    - by Martin Mobbs
    i'm tring to edit the /sys/class/backlight/max_brightness file to stop ubuntu 12 returning to maximum brightness on each reboot. gedit won't save the file after i have modified it i have used chown to change ownership to me which was successful. I then changed gedits settings so it won't save a backup but it still won't save. It returns with this error, Could not save the file /sys/class/backlight/acpi_video0/max_brightness. Unexpected error: Error writing to file: Input/output error is this yet another bug?

    Read the article

  • INI files or Registry or personal files

    - by Shirish11
    I want to save the configuration of my project. Which includes Screen size Screen Position Folder paths Users settings and so on. The standard places where you can save these are configuration values are: Registry INI files Personal files (like *.cfg) I would like to know how do you choose between these places? Also are there any pros & cons of using any of them?

    Read the article

  • ubuntu server 12.10 get input signal out of range on HP DL380 G4

    - by lix
    After installed ubuntu 12.10 server on HP DL380 G4, I can't boot into it. And the LCD got message "Input signal out of range, recommened settings is 1280x1024". I can't see the terminal and tried several LCDs and still can not work either. How can I should do now? I tried 12.04 but got fail message when installing (select and install software). Is that signal push me to change another os instead of my favorite ubuntu?

    Read the article

  • Can I use Wubi install on Windows 7 FDE?

    - by Michael Chapman
    I have a windows machine using Truecrypt 7.1a FDE. I would like to use wubi to install Ubuntu within windows. Will doing this cause any issues with my system booting up? From what I understand Wubi does not modify any bootloaders. All it does is modify some boot settings within windows. So in theory the Truecrypt custom bootloader will remain the same, and after I get through the truecrypt prompt, have the option of windows or Ubuntu right?

    Read the article

  • Midori displays mobile sites.

    - by Tigull
    I've installed Midori to work in an Elementary mockup. Midori works just fine, but, on a few domains, it opens mobile websites instead of the regular pages. A of now, this happens with gmail.com, facebook.com, paginegialle.it, and others; yet other websites which do have a mobile version, as gazzetta.it, show the regular version. I couldn't find a solution through settings and I didn't find any mention of this problem on forums or else, so any help would be greatly appreciated.

    Read the article

  • m not able to connect to wifi network

    - by Broken Heart
    i had tried every code every idea every thing but i failed wiireless driver broadcom bcm43412 but when i checked pci-id it show not supported my pci id is 14e4:4365 and chip id is BCM43142 i tried edit connection myself to olso but i cannt wat to put in clone mac adress place? device mac adress is the router mac adress but what is clone mac adress i had placed my laptop mac adress in place of clone mac adress bt it doesnot work tried every thing but it not work checked additional driver by going system settings it doesnot contain any drivers,tried internet by cable then it connects then how sholud i correct this plz tell

    Read the article

  • Acer Aspire One and Kernel 2.6.35-25 Freeze

    - by Nerdfest
    I'm having a problem with an Acer Aspire One netbook after the latest kernel upgrade. Basically, doing anything relating to an external monitor locks the trackpad, and in some cases, the keyboard as well. This lock will continue in Gnome even after reboots, and requires battery removal to fix. It does work in the graphical login manager up until the problem occurs the first time. And ideas on settings, etc, that I can change to make it work again?

    Read the article

  • How to associate hardware volume control to USB speakers?

    - by Wolfger
    My Xubuntu system recognizes my speakers, and I can change the mixer settings to make them the active sound device, but no matter what I do, the hardware dial will only affect the onboard sound device. generic-usb 0003:046D:0A19.0003: input,hidraw1: USB HID v1.00 Device [ Logitech Logitech Z205 ] on usb-0000:00:1d.1-1/input2 updated to reflect the fact that this was Xubuntu desktop (from Kubuntu install originally) where I had this problem. I was able to easily do this from Ubuntu Natty installation.

    Read the article

  • Read-only filesystem

    - by János Harsányi
    I've resized a partition (ext4) from a Live CD with GParted, and after reboot it says that the file system is read-only. I've rebooted again from the CD and checked it with GParted with no errors. How could I find out why does it re-mount the file system in read-only mode? edit: It starts normally, but after some time, the "/" mount point gets remounted with read only settings, so I think it does have errors eventually. Is there any other way to repair it?

    Read the article

  • Will you share your SQL Server configuration?

    - by Bill Graziano
    I regularly visit client sites and review their SQL Server configurations.  I come across all kinds of strange settings.  I’ve been thinking about a way to aggregate people’s configurations and see what’s common and what’s unique.  I used to do that with polls on SQLTeam.com.  I think we can find out more interesting things if we look at combinations of settings in relation to size and volume. I’ve been working on an application for another project that is similar.  It will be fairly easy to use that code for this.  I can have something up and running in a few days – if people are interested in it.  I admit that I often come up with ideas that just don’t make sense.  This may be one of them.  One of your biggest concerns has be how secure your data is.  My solution is not to store anything identifying.  The instance name and database names can both be “anonymized” and I don’t store the machine name or IP address or anything to do with logins. Some of the questions I’m curious about are: At what size database does the Enterprise Edition become prevalent? Given the total size of the databases how much RAM is common? How many people have multiple data files?  At what size does that become prevalent? How common is database mirroring?  Replication?  Log shipping? How common is full recovery mode?  At what data size does it become prevalent? I think those are all questions that are easy to answer -- with the right data.  The big question is whether or not people will share their SQL Server configurations.  I understand that organizations in regulated or high security environments can’t participate.  But I think that leaves many, many people that can.  Are you willing to share your configuration and learn about others?  I have a simple sign up form here.  It’s actually a mailing list signup that also captures your edition, number of servers and largest database.  The list will only be used for this project.  Is your SQL Server is configured correctly?  Do you wonder what the next step is as your data grows?  Take a second and sign up.

    Read the article

  • Use same dns server for all (future) connections

    - by kleofas
    I'm wondering if it is possible to specify, that all connections (even future, like when using wifi at some other place (=different SSID)) will be using pre-defined DNS server When I have some (concrete) connections, I could go to IPv4 settings, and specify DNS server there (however, in case of new connection I would have to do it (and not forget it)) This may be particularly useful for some safe/filtering dns (such as opendns's 208.67.222.123 & 208.67.220.123)

    Read the article

  • Can Ubuntu Unity be made as snappy as Xubuntu?

    - by subeh.sharma
    I am fan of Xubuntu just because of its snappiness. Now i know that it is based on light-weight XFCE which is the secret for this snappiness but I am just wondering if something could be done on Unity to bring it, say, close to that snappiness? I have not installed NVIDIA's driver as I have never seen any improvements on Ubuntu. Would love to hear views on this in case somebody have been able to tweak some settings.

    Read the article

  • Why are notifications appearing in the invisible black zone above my monitor ?

    - by Capt.Nemo
    I've got two monitors, with the right side one being slightly lower in the display settings. However any notifications I receive from notify-osd (including pidgin, notify-send etc) are sent to the top-most part of the right monitor screen, which results it in being invisible. And here's a pic of my monitor preferences : I'd earlier used the Wallpaper plugin in compiz to stitch my desktops, and then uninstalled compiz-extras. I'm using Ubuntu 11.04 in classic mode.

    Read the article

  • Unable to install any linux based os in my HP PAVILION DV6 notebook

    - by Nawin SS
    I tried to install ubuntu 11.04 and 12.04 both with wubi and with dvd.With wubi even when the installation is successfull the os wont boot after some time.and with dvd it shows error "0x0009"and the intallation stops. The same is the case with any linux based os i try to install.With fedora the installation stops after the display,"Detecting hard drive...".Are there any settings that must be changed in my system. Please instruct me how to overcome this obstacle.I am stuck..!

    Read the article

  • Where is Sphinx located after I install it?

    - by Alex
    I have to install Sphinx on my Ubuntu 11.10 for it to work on a ruby app. I managed to install it through synaptics, however when I run my sphinx (rake ts:rebuild) I get an error message saying: Sphinx cannot be found on your system. You may need to configure the following settings in your config/sphinx.yml file: * bin_path * searchd_binary_name * indexer_binary_name I guess I just need to edit the sphinx.yml file with the right info but hey, I can't seem to find out where sphinx is. Any help?

    Read the article

  • xubuntu 12.04 can't change desktop background/wallpaper permanently

    - by Frank
    If I change the desktop background (wallpaper) via right-click on desktop = desktop settings = single image, and select another background image from the list, or add a photo of my own (via the "+" symbol), I can actually change the background image, but after logging out or restarting, the wallpaper is always reset to the original xubuntu 12.04 background. So, basically, I can't find a way to permanently change the desktop background. Any ideas?

    Read the article

  • Duplicate ping response when running Ubuntu as virtual machine (VMWare)

    - by Stonerain
    I have the following setup: My router - 192.168.0.1 My host computer (Windows 7) - 192.168.0.3 And Ubuntu is running as virtual machine on the host. VMWare network settings is Bridged mode. I've modified Ubuntu network settings in /etc/netowrk/interfaces, set the following config: iface eth0 inet static address 192.168.0.220 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 Internet works correctly, I can install packages. But it gets weird if I try to ping something I get this: PING belpak.by (193.232.248.80) 56(84) bytes of data. From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=250 time=17.0 ms 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=249 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=248 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=247 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=246 time=17.0 ms (DUP! ) ^CFrom 192.168.0.1 icmp_seq=2 Time to live exceeded --- belpak.by ping statistics --- 2 packets transmitted, 1 received, +4 duplicates, +6 errors, 50% packet loss, ti me 999ms rtt min/avg/max/mdev = 17.023/17.041/17.048/0.117 ms I think even more interesting are the results of pinging the router itself: stonerain@ubuntu:~$ ping 192.168.0.1 -c 1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. From 192.168.0.3: icmp_seq=1 Redirect Network(New nexthop: 192.168.0.1) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=254 time=6.64 ms --- 192.168.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 6.644/6.644/6.644/0.000 ms But if I set -c 2: ... 64 bytes from 192.168.0.1: icmp_seq=1 ttl=252 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=251 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=254 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=253 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=252 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=251 time=13.5 ms (DUP!) From 192.168.0.3: icmp_seq=2 Redirect Network(New nexthop: 192.168.0.1) 64 bytes from 192.168.0.1: icmp_seq=2 ttl=254 time=7.87 ms --- 192.168.0.1 ping statistics --- 2 packets transmitted, 2 received, +256 duplicates, 0% packet loss, time 1002ms rtt min/avg/max/mdev = 6.666/10.141/13.556/2.410 ms Pinging host machine on the other hand works absolutely correctly: no DUPs, no errors. What seems to be the problem and how can I fix it? Thank you.

    Read the article

  • Compiz crashes after login

    - by T.Kijas
    after I log-in into Unity, compiz effects are disabled and it says compiz crashes. Restart of them usually works, but not every time. After restart of compiz, compiz works without problems, every effect is OK. I tried latest NVIDIA drivers from xorg-edgers, but situation is the same. I tried to delete folder with compiz settings, but it hasn't helped. I use two LCDs, but with only one enabled, the situation is the same. Thank you for suggestions.

    Read the article

< Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >