Search Results

Search found 5389 results on 216 pages for 'bridge router'.

Page 141/216 | < Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >

• OpenVPN Server Ethernet Bridging Question

  - by Hooplad

  Hello All, I am having a difficult time properly configuring an ethernet bridge using OpenVPN 2.0.9 install on CentOS 5 ( VPN server ). The goal that I am trying to complete is to connect a VM ( instance running on the same CentOS machine ) acting as a Microsoft Business Contact Manager server. I would then like this "BCM server" to serve Windows XP clients on 192.168.1.0/24 network as well as clients connecting from VPN ( 10.8.0.0/24 ). The setup as it is now was based off a known working configuration. The problem with the working configuration was that it would allow to the client to connect and access everything running on the VPN server ( SVN, Samba, VM Server ) but not any computers on the 192.168.1.0/24 network. I must disclose that the VPN server is behind a router/firewall. Ports are being forwarded correctly ( again, clients were able to connect to the VPN server with no problem. netcat confirms the udp port is open as well ). current ifconfig output br0 Link encap:Ethernet HWaddr 00:21:5E:4D:3A:C2 inet addr:192.168.1.169 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::221:5eff:fe4d:3ac2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:846890 errors:0 dropped:0 overruns:0 frame:0 TX packets:3072351 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:42686842 (40.7 MiB) TX bytes:4540654180 (4.2 GiB) eth0 Link encap:Ethernet HWaddr 00:21:5E:4D:3A:C2 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:882641 errors:0 dropped:0 overruns:0 frame:0 TX packets:1781383 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:82342803 (78.5 MiB) TX bytes:2614727660 (2.4 GiB) Interrupt:169 eth1 Link encap:Ethernet HWaddr 00:21:5E:4D:3A:C3 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:650 errors:0 dropped:0 overruns:0 frame:0 TX packets:1347223 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:67403 (65.8 KiB) TX bytes:1959529142 (1.8 GiB) Interrupt:233 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:17452058 errors:0 dropped:0 overruns:0 frame:0 TX packets:17452058 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:94020256229 (87.5 GiB) TX bytes:94020256229 (87.5 GiB) tap0 Link encap:Ethernet HWaddr DE:18:C6:D7:01:63 inet6 addr: fe80::dc18:c6ff:fed7:163/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3086 errors:0 dropped:166 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 b) TX bytes:315099 (307.7 KiB) vmnet1 Link encap:Ethernet HWaddr 00:50:56:C0:00:01 inet addr:192.168.177.1 Bcast:192.168.177.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fec0:1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:4224 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) vmnet8 Link encap:Ethernet HWaddr 00:50:56:C0:00:08 inet addr:192.168.55.1 Bcast:192.168.55.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fec0:8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:4226 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) current route table Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.55.0 * 255.255.255.0 U 0 0 0 vmnet8 192.168.177.0 * 255.255.255.0 U 0 0 0 vmnet1 192.168.1.0 * 255.255.255.0 U 0 0 0 br0 current iptables output Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination server_known_working.conf local banshee port 1194 proto udp dev tap0 ca ca.crt cert banshee_server.crt key banshee_server.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "route 192.168.1.0 255.255.255.0" client-to-client keepalive 10 120 tls-auth ta.key 0 user nobody group nobody persist-key persist-tun status openvpn-status.log verb 4 The following is the current CentOS server config file. server_ethernet_bridged.conf ( current ) local 192.168.1.169 port 1194 proto udp dev tap0 ca ca.crt cert server.crt key server.key dh dh1024.pem ifconfig-pool-persist ipp.txt server-bridge 192.168.1.169 255.255.255.0 192.168.1.200 192.168.1.210 push "route 192.168.1.0 255.255.255.0 192.168.1.1" client-to-client keepalive 10 120 tls-auth ta.key 0 user nobody group nobody persist-key persist-tun status openvpn-status.log verb 6 The following is one of the client's config file that was used with the known working configuration. client.opvn client dev tap proto udp remote XXX.XXX.XXX 1194 resolv-retry infinite nobind persist-key persist-tun ca client.crt cert client.crt key client.key tls-auth client.key 1 verb 3 I have tried the HOWTO provided by OpenVPN as well as others http://www.thebakershome.net/openvpn%5Ftutorial?page=1 with no success. Any help or suggestions would be appreciated.

  Read the article

• Is it possible to control my CPU frequency?

  - by Tim

  My laptop's CPU Type is: Mobile AMD Turion 64 ML-30, 1600 MHz (8 x 200) I was wondering how to find out if its CPU frequency is controllable? What softwares or other ways can control my CPU frequency? My OSes are Windows XP and Ubuntu. Can I control CPU frequency so that the CPU temperature can be controlled not to exceed some temperature? Thanks and regards! More information: My laptop is Acer Aspire 5000. Its motherboard is reported by Speccy as: Manufacturer: Acer, Inc. Model: Lugano M Version: Not Applicable Chipset Vendor: SiS Chipset Model: 760GX Chipset Revision: 03 Southbridge Vendor: SiS Southbridge Model: LPC Bridge Southbridge Revision: 25 BIOS Brand: Acer Version: 3A19 Date: 05/17/05

  Read the article

• set tap0 using virt-manager for bridged wireless

  - by DaveO

  After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

  Read the article

• set tap0 using virt-manager for bridged wireless

  - by DaveO

  After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

  Read the article

• Error while trying to configure VLAN with Open vSwitch

  - by Abhishek Chanda

  I am trying to connect a number of VMs using Open vSwitch. The VMs are on two separate physical boxes. Here is what I did: Created two tap devices on one physical host sudo ip tuntap add mode tap tap0 and same for tap1 Bring them up sudo ip link set tap0 up Add them as ports to Open vSwitch (br0 was created as a OVS bridge previously) sudo ovs-vsctl add-port br0 tap0 tag=1 Now I booted the VMs (using VirtualBox) and assigned addresses 192.168.122.11 and 192.168.122.12. Now when I try to ping one VM from another, I get the error Connect: network is unreachable. Since both VMs are connected to the switch on the same VLAN, I expect to be able to ping one from another. What is going wrong here?

  Read the article

• OpenVPN route missing

  - by dajuric

  I can connect to an OpenVPN server from Windows without any problems. But when I try to connect from Ubuntu 12.04 (start OpenVPN) I receive the following: OpenVPN needs a gateway parameter for a --route option and no default was specified by either --route-gateway or --ifconfig options SERVER IP: 161.53.X.X internal network: 10.0.0.0 / 8 What I need to do ? client configuration: client dev tap proto udp remote 161.53.X.X 1194 resolv-retry infinite nobind ca ca.crt cert client.crt key client.key ns-cert-type server comp-lzo verb 3 server conf: local 161.53.X.X port 1194 proto udp dev tap dev-node OpenVPN ca ca.crt cert server.crt key server.key # This file should be kept secret dh dh1024.pem # DHCP leases addresses to clients server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. push "route 10.0.0.1 255.255.0.0" client-to-client duplicate-cn keepalive 10 120 comp-lzo verb 6

  Read the article

• How can I set up OpenVPN to accept more than 60 connections?

  - by Robin

  Greetings! We're using OpenVPN and today hit an unexpected connection limit of 60 - even though max-clients is set to the source code default 1024. Server log: Tue Dec 21 13:49:41 2010 MULTI: new incoming connection would exceed maximum number of clients (60) We're slowly adding new clients to the VPN and expect to hit 200 some time next year, if we can get it working. We're running the server on a Win2003 R2. OpenVPN 2.0.9 Server config as follows: local 192.168.10.211 port 1195 proto tcp dev tun dev-node OpenVPN_Vision ca vision_ca.crt cert vision_server.crt key vision_server.key # This file should be kept secret dh vision_dh1024.pem server 192.168.211.0 255.255.255.0 ifconfig-pool-persist vision_ipp.txt ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 ;client-to-client keepalive 10 120 comp-lzo ;max-clients 100 # Default in source code is 1024 persist-key persist-tun status openvpn-status-vision.log log vision.log verb 3 I would greatly appreciate any help or input on this one. Thanks! Best regards, Robin

  Read the article

• Not able to access other machines on network

  - by TheVillageIdiot

  Hi I'm running Windows 7 Enterprise (32bit) on my laptop. For some time I'm not able to access other machines using \\192.168.xxx.xxx. I've installed VM Ware player on my machine few days back but I don't remember if it happened just after that or there is some other reason behind it. EDIT:- I've disabled VMWare Bridge Protocol but still no effect. Please help me. PS:- I've used both wireless and wired networks. Network sharing is enabled and I can ping other machines but cannot access network shares. I get following message: \\xxx.xxx.xxx.xxx You might not have permission to use this network resource. Contact the administrator of this server to find out if you have acess permissions. The request is not supported. EDIT (2):- Network Discovery, File and Printer Sharing, Folder sharing are all on.

  Read the article

• sudo su - username while keeping ssh key forwarding

  - by Florian Schulze

  If I have a server A into which I can login with my ssh key and I have the ability to "sudo su - otheruser", I lose key forwarding, because the env variables are removed and the socket is only readable by my original user. Is there a way I can bridge the key forwarding through the "sudo su - otheruser", so I can do stuff on a server B with my forwarded key (git clone and rsync in my case)? The only way I can think of is adding my key to authorized_keys of otheruser and "ssh otheruser@localhost", but that's cumbersome to do for every user and server combination I may have.

  Read the article

• Linux servers seeing bad download performance behind Sonicwall firewall

  - by Joshua Penix

  I'm working with a pair of co-located CentOS Linux servers sitting behind a Sonicwall PRO 2040 Enhanced firewall running in transparent bridge mode. These servers are having a strange problem downloading files more than a few megabytes in size. For example, if I try to wget or FTP a copy of the Linux kernel from kernel.org, the first ~1-2MB will download at 600+K/s, and then throughput will drop off a cliff to 1K/s. I've reviewed all the firewall configuration settings for anything suspicious, but found nothing. More interestingly, I performed the same download with a Windows server sitting behind the same firewall, and it sailed right through at 600+K/s the whole way. Has anyone seen this? Where should I start looking to troubleshoot this problem?

  Read the article

• Intel Rapid Start Driver Reinstallation doesn't work?

  - by elegantonyx

  I recently had to reformat my entire drive and reinstall Windows 7. Something that bothers me is that when I was downloading the Intel Rapid Start driver (I have a Lenovo Ideapad Y480, and it comes standard with the Rapid Start) and tried to install it, the installer claimed that my system did not meet the requirements in order to install, when it was previously installed by the OEM. My startup times have increased from 21 seconds to log-in screen to 50 seconds. Please help... Specs: Lenovo Ideapad Y480 Intel Core i7-3610 Ivy Bridge (quad-core) Nvidia Geforce 640M LE with 2gb VRAM 8GB RAM 1TB hard drive, 32 GB SSD (OEM installed)

  Read the article

• Turn my machine in a hotspot/proxy

  - by Leonardo

  My workplace does not provide a wifi... only wired connection... but my machine has a working wifi card... is there a way to "bridge" my wired connection, making my iphone connect to it and use it as if the own machine is being used? (the idea is to make my machine provide a wifi-connection and route it through my wired connection) Details: My machine OS is win 2012 server I have full admin rights to my machine There is a corporate-proxy PS: If more details needed pls ask!

  Read the article

• How anti-virus on the host machne affects performance of virtual machines?

  - by Ladislav Mrnka

  I'm diagnosing some issue with Oracle virtual box where virtual machine sometimes perform terribly slow (much slower then notebook with worse configuration): Notebook i7 (2 cores with HT = 4 logical CPUs), 4GB RAM, 5400 rpm disk, Win 7 64bit Virtual machine (Oracle Virtual Box) Host: i7 (4 cores with HT = 8 logical CPUs, 12 GB RAM, system runs from SSD, virtual machine from 7200 rpm disk, Win 7 64bit) Virtual machine: 4 cores assigned, 8 GB RAM assigned, Win 2008 R2 Enterprise (64 bit) Virtual machine uses bridge to separate network interface (machine has two) VPN for network communication No other virtual machine runs on the host Host has installed ESET Smart Security All SW is updated with last version. My question is if anti-virus on the host machine can somehow affect performance of the virtual machine and if so how can I turn it off without turning the anti-virus itself?

  Read the article

• How to add addtional disks to a Windows 2008 KVM based Guest?

  - by taazaa

  I have a Win 2008 KVM based guest VM running on a Ubuntu 10 host. It is a raw image of 22G. I want to add a "data" drive which would show up as "D:\" drive on the guest. I first created a raw image using: qemu-img create -f raw ~/vmdisk2.img 50G Then, tried attaching it using virsh attach-disk. When that did not work, I tried editing the xml file of the VM directly. Both did not seem to work. I would greatly appreciate any help on how to do this and what the best practice is. I want to keep the base image small, so that I can clone it (hopefully) and then attach necessary storage based on the application at hand. Update: The xml of the vm before adding the second drive: <domain type='kvm'> <name>win08e-vm1</name> <uuid>183a4ba0-1c0b-0b04-ad01-aa7c3a4cb390</uuid> <memory>1048576</memory> <currentMemory>1048576</currentMemory> <vcpu>2</vcpu> <os> <type arch='x86_64' machine='pc-0.12'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/win08e-vm1.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/home/taazaa/iso/Win08ER264.iso'/> <target dev='hdc' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:7f:a7:ae'/> <source bridge='br0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' keymap='en-us'/> <video> <model type='vga' vram='9216' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </memballoon> </devices> </domain> Thanks!

  Read the article

• How to route traffic through a VPN tunnel?

  - by Gabriel

  The problem with our server is that we need to use the bug ridden and awful AT&T network client, which causes our server to bluescreen once per 24 hours. Does any one know how to (or has a good guide) quickly set up a workstation running Windows server 2008 R2 as a proxy server. So this spare workstation would run AT&T and would act as a bridge between our server and the server that can be connected to only via the AT&T VPN software. And this way our own production server would not crash so often (or not at all) and the workstation can happily crash whenever it wants to.

  Read the article

• Problems connecting Centos on VMware to the network using bridged connection.

  - by Sakin

  Hi, I installed CentOs on VMware running on windows XP. When trying to configure it to connect to the internet in a bridged configuration, I get an error message when trying to bring up the network interface: [root@VMLinux ~]# /et/init.d/network start Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... failed [FAILED] VM is running on a machine that has access to the network, I tried it on two different networks that have DHCP enabled. Everything works fine when using a NAT connection through my host. How can I make the bridge work for me? Thanks.

  Read the article

• Setting up the metasploitable in virtualbox

  - by SetSlapShot

  I'm supposed to try and use kali to do exploits on metasploitable, but I'll burn that bridge when I get there. My question right now is: How do I set up a host only network on virtualbox? I heard that it was unsafe to run metasploitable in bridged networking mode, that host only or NAT is better. When I run metasploitable on NAT, the kali box (attacker) has the same ip address as the metasploitable box, and nmap doesn't really return anything except what I can only assume would be a scan of its own ports? I tried to create a host only network in virtual box. I left the adapter settings at the default, and unchecked DHCP server. now when I run ifconfig on the metasploitable box, there is no ip address listed. Am I setting up/connecting to/not configuring the host only network correctly?

  Read the article

• RAID1: Migrate HDD to SSD?

  - by OMG Ponies

  My current workstation uses an Adaptec 5805, with Win2008 mirrored between two 72 GB (10K?) savvio drives. My question is if there's a way to migrate the mirror to use SSDs - I've been looking at 90GB Corsair Force (Sandy Bridge) to replace the existing setup. If it's possible, without installing the OS fresh. If I replaced the mirrored drive with an SSD, would the array sync the drives? Then I could promote the SSD mirror to be the primary, and use the second SSD as the mirror. That'd be too easy... Or should use Ghost to get an image of the existing setup, apply it to the SSD for a new mirror to be setup on?

  Read the article

• RAID1: Migrate HHD to SSD?

  - by OMG Ponies

  My current workstation uses an Adaptec 5805, with Win2008 mirrored between two 72 GB (10K?) savvio drives. My question is if there's a way to migrate the mirror to use SSDs - I've been looking at 90GB Corsair Force (Sandy Bridge) to replace the existing setup. If it's possible, without installing the OS fresh. If I replaced the mirrored drive with an SSD, would the array sync the drives? Then I could promote the SSD mirror to be the primary, and use the second SSD as the mirror. That'd be too easy... Or should use Ghost to get an image of the existing setup, apply it to the SSD for a new mirror to be setup on?

  Read the article

• Time randomly changing itself, internet randomly dying

  - by Vee

  Operating System MS Windows 8 Enterprise 64-bit CPU Intel Core i7 2700K @ 3.50GHz 45 °C Sandy Bridge 32nm Technology RAM 8,00 GB Dual-Channel DDR3 @ 800MHz (8-8-8-24) Motherboard ASRock Z77 Extreme4-M (CPUSocket) 40 °C Graphics SMXL2270HD (1920x1080@60Hz) M2094D-PZ (1680x1050@60Hz) 896MB GeForce GTX 275 (CardExpert Technology) 57 °C Hard Drives 466GB FUJITSU MAXTOR STM3500320AS (SATA) 39 °C Optical Drives ASUS DRW-2014L1T Audio High Definition Audio Device Hello everyone, I installed Windows 8 RTM a few weeks ago. It's not my first time installing it, but it's the first time having two annoying problems: 1) Randomly, the system clock changes time all by itself - to fix it I have to open the time window and sync it with the internet. 2) Randomly, internet connection stops working - to fix I have to run troubleshooting. Windows will find a problem with IP on the "Ethernet" connection and fix it. 3) In rare occasions, my PC freezes and I need to restart it (a BSOD once happened, but after that only freezes) How can I permanently solve these problems? This is what I've already tried: Reset Virus scan Stop/reset the Windows Time service Disable/re-enable Windows Time automatic internet sync Change time from BIOS Change motherboard battery

  Read the article

• Linux Mint on VirtualBox has no internet connection

  - by Martin

  Physical machine: Mac Mini running OSX 10.7.5 Virtual machine: Linux Mint 15 Cinnamon 64-bit Using VirtualBox. I am trying to make the linux connect to the internet. For some reason I can access the host computer with 192.168.2.100. Its set up to show me a web-page that says "It works". This I can see from the linux. But I cannot reach anything on the internet. Either FireFox says "Unable to connect" or when I run nslookup google.com I get connection timed out; no servers could be reached. My setting on VirtualBox under the Network tab are: Bridge Adapter vnic0 promiscouos Mode:Allow All`. If it makes a difference, the host has a WiFi connection to the home router. What have I missed?

  Read the article

• How to setup wireless radio to network using 2 nics?

  - by CptanPanic

  I am having problems setting up this network, hopefully someone can help me. Laptop <- Wireless Radio <- ... - Wireless Radio <- CPU1( NIC1,NIC2) <- SWITCH <- CPU2 I have a computer with 2 NICs (CPU1). One goes to a wireless radio that connects to a wireless laptop, the other NIC goes to network switch. I can't connect Wireless Radio to switch due to space constraints. All the machines and radios are on same network addresses. I tried using Window's Bridge network which did allow Laptop to reach CPU2, but not CPU1. What is the way to get this to work so all the computers can talk to each other?

  Read the article

• How to map a VPN (tun0) network adapter on host Ubuntu to a VirtualBox guest Windows?

  - by Mashimom

  I have a Ubuntu 10.04 running Oracle VirtualBox 3.2.6 with a Windows XP guest. I use a VPN that I would like to be accessed by the guest VM, on a ifconfig it shows as: tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:5.192.10.99 P-t-P:5.192.10.99 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1362 Metric:1 RX packets:14151 errors:0 dropped:0 overruns:0 frame:0 TX packets:19860 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:4415271 (4.4 MB) TX bytes:17949982 (17.9 MB) Using NAT or Bridge adapters on the VM only gives me the non-vpn adapter. How can I map the tun0 adapter to VirtualBox?

  Read the article

• Access VirtualBox client (WinXP) from host (Linux) when client is connected to VPN

  - by hsz

  Hello ! I have a host (Ubuntu Linux) with VirtualBox on which is installed client (Windows XP). I set bridge connection for them. Host has IP 192.168.0.102 and client 192.168.0.103. On client I've installed WAMP server and on host I can access it by simply call 192.168.0.103. When I connect on client to the Cisco VPN (need access to database over VPN) I cannot access that server from host. What should I do to make it work ?

  Read the article

• How to use 2 or more internet connections on the same network?

  - by Rogue

  Living in a joint family we have 3 internet connections, each floor has one internet connection which is split per floor. Each internet connection is shared between 4-5 computers using a switch per floor. Each of these internet sharing networks are independent of each other. What I want to achieve here is a local network (for local messenger and file sharing) that can combine all the 3 independent networks, problem is that whenever I try to do that the whole network tends to use just one internet connection. I have all the necessary hardware. How do I solve this problem, one approach could be that I could get one PC to act as a server and bridge the internet connections and then the whole network would have to access the internet through this server. Theoretically this could be possible but I have never tried this approach in real life. Also if certain computers need be restricted from internet access how would this be possible on the same network?

  Read the article

< Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >