Search Results

Search found 13331 results on 534 pages for 'fluent interface'.

Page 141/534 | < Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >

• Ubuntu 10.04 recognizing USB 2.0 external HD as USB 1.1

  - by btucker

  When I connect the USB 2.0 drive I see this: usb 1-4.3: new full speed USB device using ohci_hcd and address 5 so I know it's getting seen as USB 1.1. usb-devices shows that it really is USB 2.0 and connected to a USB 2.0 hub: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05e3 ProdID=0608 Rev=77.61 S: Product=USB2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=13fd ProdID=1340 Rev=02.10 S: Manufacturer=Generic S: Product=External C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage It seems the problem is that root hub is: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=02.06 S: Manufacturer=Linux 2.6.32-25-server ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub And there's no mention of ehci_hcd. lsusb -t gives me: /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/10p, 12M |__ Port 4: Dev 2, If 0, Class=hub, Driver=hub/4p, 12M |__ Port 2: Dev 4, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 3: Dev 5, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 6: Dev 3, If 0, Class=stor., Driver=usb-storage, 12M It seems like I'm missing something which would allow the OS to see USB 2.0 devices. Can anyone point me in the right direction? EDIT Full lsusb -v output: Bus 001 Device 005: ID 13fd:1340 Initio Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x13fd Initio Corporation idProduct 0x1340 bcdDevice 2.10 iManufacturer 1 Generic iProduct 2 External iSerial 3 57442D574341595930323337 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0608 USB-2.0 4-Port HUB bcdDevice 77.61 iManufacturer 0 iProduct 1 USB2.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00e0 Ganged power switching Ganged overcurrent protection Port indicators bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0103 power enable connect Port 3: 0000.0103 power enable connect Port 4: 0000.0100 power Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.32-25-server ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:02.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0103 power enable connect Port 5: 0000.0100 power Port 6: 0000.0103 power enable connect Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled

  Read the article

• Dec. 6 Webcast: See the New UI for JD Edwards

  - by Theresa Hickman

  When: Dec. 6, 2011 Time: 8:00am PST What: Live webcast and demo Tune into this live webcast to see the just completed new JD Edwards EnterpriseOne User Interface. This is one of the most significant releases with a massive number of feature innovations for users and system administrators. We are looking forward to demonstrating the new User Interface and Tools. The following panel of experts will be available to answer all your questions: Lyle Ekdahl – Oracle Group Vice President Gary Grieshaber – Oracle Strategy Senior Director Brian Stanz – Oracle Development Senior Director Click here to register. Note: You must pre-register for this event.

  Read the article

• "Imprinting" as a language feature?

  - by MKO

  Idea I had this idea for a language feature that I think would be useful, does anyone know of a language that implements something like this? The idea is that besides inheritance a class can also use something called "imprinting" (for lack of better term). A class can imprint one or several (non-abstract) classes. When a class imprints another class it gets all it's properties and all it's methods. It's like the class storing an instance of the imprinted class and redirecting it's methods/properties to it. A class that imprints another class therefore by definition also implements all it's interfaces and it's abstract class. So what's the point? Well, inheritance and polymorphism is hard to get right. Often composition gives far more flexibility. Multiple inheritance offers a slew of different problems without much benefits (IMO). I often write adapter classes (in C#) by implementing some interface and passing along the actual methods/properties to an encapsulated object. The downside to that approach is that if the interface changes the class breaks. You also you have to put in a lot of code that does nothing but pass things along to the encapsulated object. A classic example is that you have some class that implements IEnumerable or IList and contains an internal class it uses. With this technique things would be much easier Example (c#) [imprint List<Person> as peopleList] public class People : PersonBase { public void SomeMethod() { DoSomething(this.Count); //Count is from List } } //Now People can be treated as an List<Person> People people = new People(); foreach(Person person in people) { ... } peopleList is an alias/variablename (of your choice)used internally to alias the instance but can be skipped if not needed. One thing that's useful is to override an imprinted method, that could be achieved with the ordinary override syntax public override void Add(Person person) { DoSomething(); personList.Add(person); } note that the above is functional equivalent (and could be rewritten by the compiler) to: public class People : PersonBase , IList<Person> { private List<Person> personList = new List<Person>(); public override void Add(object obj) { this.personList.Add(obj) } public override int IndexOf(object obj) { return personList.IndexOf(obj) } //etc etc for each signature in the interface } only if IList changes your class will break. IList won't change but an interface that you, someone in your team, or a thirdparty has designed might just change. Also this saves you writing a whole lot of code for some interfaces/abstract classes. Caveats There's a couple of gotchas. First we, syntax must be added to call the imprinted classes's constructors from the imprinting class constructor. Also, what happends if a class imprints two classes which have the same method? In that case the compiler would detect it and force the class to define an override of that method (where you could chose if you wanted to call either imprinted class or both) So what do you think, would it be useful, any caveats? It seems it would be pretty straightforward to implement something like that in the C# language but I might be missing something :) Sidenote - Why is this different from multiple inheritance Ok, so some people have asked about this. Why is this different from multiple inheritance and why not multiple inheritance. In C# methods are either virtual or not. Say that we have ClassB who inherits from ClassA. ClassA has the methods MethodA and MethodB. ClassB overrides MethodA but not MethodB. Now say that MethodB has a call to MethodA. if MethodA is virtual it will call the implementation that ClassB has, if not it will use the base class, ClassA's MethodA and you'll end up wondering why your class doesn't work as it should. By the terminology sofar you might already confused. So what happens if ClassB inherits both from ClassA and another ClassC. I bet both programmers and compilers will be scratching their heads. The benefit of this approach IMO is that the imprinting classes are totally encapsulated and need not be designed with multiple inheritance in mind. You can basically imprint anything.

  Read the article

• Why can't the Unity panel be hidden?

  - by newboldrob

  I am a light Linux user. I have Natty installed on my netbook and used to have it dual-booted on my Windows 7 PC. After a total refresh of my notebook off came Ubuntu and I'm back to basics over there. But HERE (I'm running Natty on a HP-Mini) I've decided to poke around a bit to get the best user experience on this little thing. I really like the Unity interface but really hate the static Unity Panel. I have no clue why it's even necessary to be on globally. After all, in the classic interface, both panels can autohide or get filed aside with buttons on either side of the bar. On a 10" screen, real estate is at a premium. What intrinsic purpose does the static unity panel hold for the OS? There has to be a great reason for this thing to HAVE to be here. It ONLY goes away in fullscreen apps and I can't use everything fullscreen Why can the unity panel not be hidden?

  Read the article

• Why is my Quickly app full of fail?

  - by bstpierre

  I tried to use quickly on Ubuntu 12.04 to create an application, but it does not behave as described in that linked page. I don't get a popup when creating the application (see error below). % quickly create ubuntu-application foo Creating project directory foo Creating bzr repository and committing Launching your newly created project! (foo:16847): GLib-GIO-ERROR **: Settings schema 'org.gnome.desktop.interface' is not installed Congrats, your new project is setup! cd /tmp/foo/ to start hacking. It creates a project, but when I try to run, it crashes and burns: % cd foo % quickly run (foo:22639): GLib-GIO-ERROR **: Settings schema 'org.gnome.desktop.interface' is not installed Is this because I'm not using gnome-shell? What can I do to get a working project? (Edit: As a side note, I'd be willing to debug this myself, but I don't even get a traceback. What do I have to do to get quickly to give me a traceback?)

  Read the article

• Design pattern: static function call with input/output containers?

  - by Pavlo Dyban

  I work for a company in software research department. We use algorithms from our real software and wrap them so that we can use them for prototyping. Every time an algorithm interface changes, we need to adapt our wrappers respectively. Recently all algorithms have been refactored in such a manner that instead of accepting many different inputs and returning outputs via referenced parameters, they now accept one input data container and one output data container (the latter is passed by reference). Algorithm interface is limited to a static function call like that: class MyAlgorithm{ static bool calculate(MyAlgorithmInput input, MyAlgorithmOutput &output); } This is actually a very powerful design, though I have never seen it in a C++ programming environment before. Changes in the number of parameters and their data types are now encapsulated and they don't change the algorithm callback. In the latest algorithm which I have developed I used the same scheme. Now I want to know if this is a popular design pattern and what it is called.

  Read the article

• Static IP breaks Network connection

  - by Pasquale Tedesco

  I am somewhat new to Linux. I am setting up a Web server and installed Ubuntu server 14.04 on an vSphere ESXi 5.5 host. I am connecting perfectly fine to the internet when using DHCP but when I apply my Static settings I loose the ability to connect to websites. Whats weird is I can Ping google.com but if I try wget gooogl.com it hangs at connecting to google.com (google.com):173.194.43.32:80 and I get "failed: connection refused" But if I am set to DHCP the connection resolves perfectly. Thanks # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 #iface eth0 inet dhcp iface eth0 inet static address 10.1.2.25 gateway 10.1.2.2 netmask 255.255.255.0 search tsig.com dns-nameservers 10.1.2.13 10.1.2.30

  Read the article

• Create Custom Google Analytics Interfaces Using PHP

  Learn how to build custom traffic analysis interfaces using PHP, the Google Analytics Data Export API, and the Google Analytics API PHP interface.

  Read the article

• Create Custom Google Analytics Interfaces Using PHP

  Learn how to build custom traffic analysis interfaces using PHP, the Google Analytics Data Export API, and the Google Analytics API PHP interface.

  Read the article

• Handheld device software - Handheld tuners?

  - by NathanH

  Hey I've been looking around and really don't understand what software some of these company's use for their handheld devices. I've used a lot of Handheld Tuners (Cobb Accessport, Diablo Sport). I've gotten more and more knowledgable of programming and I'm really wanting to understand what software they use on these devices to have a graphical interface. And to hold all the files to flash over to the ecu. I'm just unsure how you would get basically all the components to work together (screen, buttons, memory) without having drivers installed. I could be totally wrong here on using the term drivers, but that's what I would like some help to get more knowledge on (only thing I've really found is making a handheld game boy from scratch,but that was using a emulator.). I've tried looking it up but can't really find a good write up or explanation anywhere I look. Just really would like to put a little device together and have a simple user interface and work from there. Thanks, Nathan

  Read the article

• Manually activate Network Manager Applet

  - by diosney

  The issue I've is that when I connect via modem through gnome-ppp the Network Manager Applet don't detect a connection and don't let me use the configured VPNs via its interface. How Can I manually activate the Network Manager Applet? What I need is to enable the Network Manager apple in order to use the "VPN Connection" section of the GUI. When I don't have an ethernet cable connected and I connect through a modem the Network Manager applet doesn't enables itself, it is like if don't recognizes the ppp0 interface. My question is: there is a way to force the Network Manager GUI indicator to make it "alive"/"up"/"enabled" in order to use the "VPN Connections"section? Thanks in advance.

  Read the article

• WebCenter Content Web Search Performance: Do you really need that folder path info?

  - by Nicolas Montoya

  End-users want content at their fingertips at the speed of thought if possible. When running search operations in the WebCenter Conter Web Interface every second or fraction of a second improvement does matter. When doing some trace analysis on the systemdatabase tracing on a customer environment, we came across some SQL queries that were unnecessarily being triggered! These were related to determining the folder path for every entry part of the search result set. However, this folder path was not even being used as part of the displayed information in the user interface.Why was the folder path information being collected when it was not even displayed in the UI? We found that the configuration parameter 'FolderPathInSearchResults' was set to 'true' under Administration > Admin Server > General Configuration > Additional Configuration Variables as shown below:When executing a quicksearch by keyword we were getting 100 out of 2280 entries in the first page of the result set.When thera 'FolderPathInSearchResults' configuration parameter is set to 'true', the following queries appear in the systemdatabase tracing:100 executions for a query on the FolderFiles table for each of the documents displayed in the first page:>systemdatabase/6       12.13 11:17:48.188      IdcServer-199   1.45 ms. SELECT * FROM FolderFiles WHERE dDocName='SLC02VGVUSORAC140641' AND fLinkRank=0[Executed. Returned row(s): true]382 executions for a query of the folders tables - most of the documents that match the keyword criteria are at a folder depth level of three or four:>systemdatabase/6       12.13 11:17:48.114      IdcServer-199   2.57 ms. SELECT FolderFolders.*,FolderMetaDefaults.* FROM FolderFolders,FolderMetaDefaults WHERE FolderFolders.fFolderGUID=FolderMetaDefaults.fFolderGUID(+) AND((FolderFolders.fFolderGUID = '1EB8E527E19B09ED3FE82EE310AEA13A' ) )[Executed.Returned row(s): true]By setting this 'FolderPathInSearchResults' configuration parameter to 'false', the above queries were no longer reported in the Server Output System Audit Information.Now, let's consider a practical scenario:Search result set page = 100Average folder depth der document in the search result set: 5The number of folder path related queries will be: 100 + 5*500 = 600If each query takes slightly over 3 ms. You would have 2000 ms (2 seconds) spent in server time to get this information.The overall performance impact goes beyond seerver time execution, as this information needs to travel from the server to the browser. If the documents are further nested into the folder hierarchy, additional hundreds of queries may be executed. If folder path is not being displayed in the end-user interface profile, your system may be better of with the 'FolderPathInSearchResults' configuration parameter disabled.

  Read the article

• Does a code inherit GNU GPL if it just link to GPL librrary?

  - by user14284

  Sorry for bad English. Suppose there is a library xxx under GNU GPL, that provide a function yyy. Suppose my code links to the library and use this function. Does my code inherit GPL license? IANAL, but my thoughts are conflicting: On other hand, my code is derivative from the library, so it should inherit GPL. On other hand, my code just use link to the xxx. Maybe there are other libraries, that has the same interface (particularly, they provide yyy function with same functionality, but different implementation). My code may link to any. My code really doesn't directly derived from xxx, it just use its interface. So, my code shouldn't inherit GPL. I'm confused. ADDED. The question is absolutely abstract. I don't mean any concrete GPL library.

  Read the article

• Cannot login via Unity login screen after upgrade to 12.04

  - by codesurgeon

  Logging in via the shell accessed through Ctrl+Alt-F1 and logging in as guest via the graphical user interface work 0O When I try to log into my standard user account via the graphical interface, the screen flashes to black for a couple of seconds and bumps me back to a pristine login screen. Entering a wrong password for my user account yields the standard error message - my user account and credential verification seem to be OK. I suppose that my individual graphics configuration causes problems ... I'm not sure how to reset that. I've tried stopping the UI via sudo service lightdm stop executed sudo nvidia-xconfig and restarted the UI sudo service lightdm start to no avail. My workstation has a Nvidia GeForce 560-448 graphics card. I've tried getting this fixed with the latest Nvidia 64-bit drivers (cURL'ed from the official website), that is 295.49 and the latest beta driver 302.07. Anybody have an idea how to get this fixed? Your help is appreciated :)

  Read the article

• Kubuntu 11.10: How to remove "Search and launch"

  - by user38489

  Is it possible to remove the "Search and launch" whateveritis from my "desktop"? I've actually tried both Desktop and Netbook modes, but it stays there in both of them. I'm not afraid of editing files in the ~/.kde dir, but I would be really disappointed if this is the only way to do it. [more details/rants] I was able to wipe out several things but I've ended up with a black window that's movable (Alt-click) but not removable. Beside being surprised by the performances, I find Kubuntu extremely unfriendly, and I can't find the logic behind the items of the interface. I've tried to search for documentation, but what I've found is not updated and doesn't include the Netbook interface.

  Read the article

• Clarification on the Strategy Pattern

  - by Holly

  I've just been reading through some basic design patterns, Could someone tell me if the term "strategy pattern" only applies if your implementing a completely abstract interface? What about when your children (concretes?) inherit from a parent class (the strategy?) with some implemented methods and some virtual and/or abstract functions? Otherwise the rest of the implementation, the idea that you can switch between different children at run time, is identical. This is something i'm quite familiar with, i was wondering if you would still call it the Strategy Pattern or if that term only applies to using an interface. Apologies if this question is not appropriate! Or if this is just nitpicking :) I'm still learning and i'm not really sure if design patterns are quite heavily defined within the industry or just a concept to be implemented as you like.

  Read the article

• Natural User Interfaces: Notes From the Field

  We're early on in what will be a sea change in UI design User interface - Human-Computer Interaction - Business - Management - Organizational Change

  Read the article

• How to run Java application in KDE with Qt-like UI?

  - by squallbayu

  Continuing my question in Install Ubuntu or Kubuntu? I have tried Kubuntu (KDE), and it was very cool as cool as Ubuntu (GNOME). but there is little problem with its user interface when we start Java application (LimeWire, Netbeans, Eclipse). User interface changed to Metal, (which I think is a bit old school). Can we run it with Qt like UI?, such as when we start Java application in Gnome (run with GTK like UI/emulation GTK like UI)? I hear there is a class for Java in order to make Java application UI like Qt, called the Qt/Jambi bindings for Java. How can we integrate it in KDE when we start Java application? My other question is if not wrong, OpenOffice was built in Java,so why OpenOffice can run with Qt like UI in KDE?

  Read the article

• Wireless connection by using command screen

  - by Amadeus

  I installed Ubuntu 12.04 armhf to my beagleboard-xm and now trying to connect to a wireless network. First, I checked if I can search for available networks: ubuntu@arm:~$ iwlist scan lo Interface doesn't support scanning. usb0 Interface doesn't support scanning. wlan0 Scan completed : Cell 01 - Address: EA:7D:EF:60:C9:0B Channel:1 Frequency:2.412 GHz (Channel 1) Quality=70/70 Signal level=-23 dBm Encryption key:on ESSID:"ghostrider" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Ad-Hoc Extra:tsf=000000005a1ab50e Extra: Last beacon: 6242ms ago IE: Unknown: 000A67686F73747269646572 IE: Unknown: 010882848B962430486C IE: Unknown: 030101 IE: Unknown: 06020000 IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: Unknown: 32040C121860 IE: Unknown: 2D1A2C181BFF00000000000000000000000000000000000000000000 IE: Unknown: 3D16010800000000FF000000000000000000000000000000 IE: Unknown: DD09001018020000000000 Then I edited /etc/network/interfaces file to the following: root@arm:/etc/wpa_supplicant# cat /etc/network/interfaces auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # Example to keep MAC address between reboots #hwaddress ether DE:AD:BE:EF:CA:FE # WiFi Example auto wlan0 iface wlan0 inet dhcp wpa-ssid "ghostrider" wpa-psk "b34d373eb2fb836a43b0afffe783c7d0af694724506c9e77b06d1021302905bf" But I cannot still connect to the wireless network: root@arm:/etc/wpa_supplicant# iwconfig lo no wireless extensions. usb0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Asociated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on eth0 no wireless extensions. root@arm:/etc/network# ifup wlan0 Failed to bring up wlan0. What is wrong? Should I change any other files also? But I think it was enough. By the way if you are curious about where that wpa-psk came from: zero@ghostrider:~$ wpa_passphrase ghostrider 34bddf67c2 network={ ssid="ghostrider" #psk="34bddf67c2" psk=b34d373eb2fb836a43b0afffe783c7d0af694724506c9e77b06d1021302905bf } I will appreciate any effort to help. Regards, Amadeus ps: Also I tried to connect manually: root@arm:/etc/network# iwconfig wlan0 essid ghostrider key s:34bddf67c2 But this did not solve my problem also.

  Read the article

• Is excessive indirection and/or redundant encapsulation a recognized concept?

  - by Omega

  I'm curious if there's a series of tendencies or anti-patterns when programming whereby a developer will always locally re-wrap external dependencies when consuming them. A slightly less vague example might be say when consuming an implementation of an interface or abstract, and mapping every touch-point locally before interacting with them. Like an overcomplicated take on composition. Given my example, would the interface not be reliable enough and any change to it never be surmountable any any level of indirection? Is this a good or a bad practice? Can it ever go too far? Does it have a proper name?

  Read the article

• using curl command to download file in parts from different interfaces and to run the commands simultaneously from a script

  - by jsjain007

  i wanted to download a file using curl command simultaneously in different parts using ip aliasing(virtual Ethernet ports) so what i did was pasted the commands in a text file and run but the problem as obvious since it is in a file the commands will be executed one by one so is there a way to run all those commands simultaneously. here is the command curl --interface eth0:0 --range 0,38010880 http://wdl.cache.ijinshan.com/wps/download/Linux/unstable/kingsoft-office_9.1.0.4244~a12p3_i386.deb -o kinsoft-office.part1 curl --interface eth0:1 --range 38010880 ,- http://wdl.cache.ijinshan.com/wps/download/Linux/unstable/kingsoft-office_9.1.0.4244~a12p3_i386.deb -o kinsoft-office.part2 cat kinsoft-office.part*>kinsoft-office can anyone help me to run these above 2 commands simultaneously from the script so as to increase download speed

  Read the article

• Building Interactive User Interfaces with Microsoft ASP. ...

  The ASP.NET AJAX UpdatePanel provides a quick and easy way to implement a snappier, AJAX-based user interface in an ASP.NET WebForm. In a nutshell, UpdatePanels allow page developers to refresh selected parts of the page (instead of refreshing the entire page). Typically, an UpdatePanel contains user interface elements that would normally trigger a full page postback - controls like Buttons or DropDownLists that have their <code>AutoPostBack</code> property set to True. Such controls, when placed inside an UpdatePanel, cause a partial page postback to occur. On a partial page postback only the contents of the UpdatePanel are refreshed, avoiding the "flash" of having the entire page reloaded. (For a more in-depth look at the UpdatePanel control, refer back to the

  Read the article

• DHCP won't start / subnetting

  - by user114371

  I recently changed the IP address on an Ubuntu 12.04 server I have in my lab, which is running isc-dhcp-server. After doing so and modifying the dhcpd.conf file, my dhcp service would not start. I basically used the same configuration, except I modified everything to use /25 scopes rather than /24. When I try to start / restart the service, I see the following: MY@ubuntuserver:~$ sudo service isc-dhcp-server restart stop: Unknown instance: isc-dhcp-server start/running, process 20918 It looks like it starts, but it isn't actually running and Webmin states that the DHCP service is not running. So my question is, does isc-dhcp-server support subnetting (CIDR) style scopes, or must they be class A / B / C scopes (doesn't seem likely)? I've double checked the interface reference (this is a VM with only one defined eth0 interface) and everything else I can thing of.

  Read the article

• dhcpd fails to start

  - by TECHPREACHER

  I recently installed Ubuntu 11.10 I then used apt-get to grab isc-dhcp3. I removed Network-Manager and manually configured my network interface eth0. In addition, I hand edited a dhcpd.conf file and designated eth0 as the listen port in /etc/default/isc-dhcp-server. However, each time I attempt to start dhcpd it fails. When I view the syslog file, the last line is as follows: "Not configured to listen on any interfaces!" My eth0 interface works fine. I can ping addresses inside and outside the network and perform DNS queries. Any help would be greatly appreciated. AJ

  Read the article

• No wireless connection using a conceptronic c54i (RT2561/RT61 rev B)

  - by jrosell

  Detected but not working. New install on ubuntu 11.10 using coneptronic C54Ri. As documentation says it uses Ralink drivers.... Any ideas why my wireless does not work? $ lspci -nn | grep -i 'ralink' 01:05.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:90:e5:af:13 inet addr:192.168.0.197 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::21e:90ff:fee5:af13/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:28361 errors:0 dropped:0 overruns:0 frame:0 TX packets:16858 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:39812172 (39.8 MB) TX bytes:1633405 (1.6 MB) Interrupt:43 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:80 errors:0 dropped:0 overruns:0 frame:0 TX packets:80 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6608 (6.6 KB) TX bytes:6608 (6.6 KB) iwconfig wlan0 wlan0 IEEE 802.11abg ESSIDff/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thrff Fragment thrff Power Managementff lsmod | grep rt rt61pci 27493 0 crc_itu_t 12627 1 rt61pci rt2x00pci 14202 1 rt61pci rt2x00lib 48114 2 rt61pci,rt2x00pci mac80211 272785 2 rt2x00pci,rt2x00lib cfg80211 172392 2 rt2x00lib,mac80211 eeprom_93cx6 12653 1 rt61pci parport_pc 32114 1 parport 40930 3 ppdev,parport_pc,lp lsmod | grep rt [ 2497.816989] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.827112] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.837430] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.847528] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.847632] phy0 -> rt61pci_wait_bbp_ready: Error - BBP register access faile d, aborting. [ 2497.847637] phy0 -> rt61pci_set_device_state: Error - Device failed to enter state 4 (-5). sudo lshw -C network *-network DISABLED description: Wireless interface product: RT2561/RT61 rev B 802.11g vendor: Ralink corp. physical id: 5 bus info: pci@0000:01:05.0 logical name: wlan0 version: 00 serial: fa:b8:14:58:62:35 width: 32 bits clock: 33MHz capabilities: pm cap_list ethernet physical wireless configuration: broadcast=yes driver=rt61pci driverversion=3.0.0-12-generic firmware=0.8 latency=0 link=no multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:fdef8000-fdefffff iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan0 Failed to read scan data : Network is down uname -mr 3.0.0-12-generic i686 Edit 1 $ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no On reboot, sudo lshw -C network returns network is ok. Hovever, WPA keeps on asking the wireless key

  Read the article

< Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >