Search Results

Search found 40698 results on 1628 pages for 'jon works'.

Page 141/1628 | < Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >

• How to debug a Gruntfile with breakpoints using node-inspector?

  - by Kris Hollenbeck

  So I have spent the past couple days trying to get this to work with no luck. Most of the solutions I have found seem to work "okay" for debugging node applications. But I haven't had much luck debugging grunt stand alone. I would like to be able to set breakpoints in my gruntfile and either step through the code with either the browser or an IDE. I have tried the following: Debugging using intelliJ IDE Using Grunt Console (Process finished with exit code 6) Debugging with Nodeeclipse (This sort of works okay but doesn't hit the breakpoints set in eclipse, not very intuitive) Debugging using node-inspector (This one also sort of works. I can step through a little ways using F11 and F10 in chrome. But eventually it just crashes. Using F8 to skip to break point never works.) ERROR MESSAGE USING NODE-INSPECTOR So currently node-inspector feels like it has gotten me the closest to what I want. To get here I did the following: From my grunt directory I ran the following commands: grunt node-inspector node --debug-brk Gruntfile.js And then from there I went to localhost:8080/debug?port=5858 to debug my Gruntfile.js. But like I mentioned above, as soon as I hit F8 to skip to breakpoint it crashes with the above error. Has anybody had any success using this method to try to debug a Gruntfile? So far from my search efforts I have not found a very well documented way of doing this. So hopefully this will be useful or beneficial information for future users. Also I am using Windows 7 by the way. Thanks in advance.

  Read the article

• Flash SWF not initializing until visible - can I force them to initialize?

  - by Jason

  I have an application that needs to render about 100 flash graphs (as well as other DOM stuff) in a series of rows that vertically extend many times beyond the current visible window - in other words, the users have to scroll down see see all the different graphs. This application is also dynamic and when a user changes a value in the DOM (anywhere on the page) it will need to propagate that change to all the Flash graphs at the same time. So I setup all the externalInterface callbacks and was careful to not let any JS start going until the ever-so-important "flashIsReady" call and...it worked great until I tried to update() the existing swf's with new data. Here was the behavior: - All the swfs load (initially) in both IE/Fox = good. - Updating swfs with new content works in IE but not in Fox = not good - Updating swfs with new content works in Fox --ONLY IF-- I scrolled down to the bottom of the page, then back to the top -- BEFORE -- I triggered an update(). So then I started tracing out each time a swf called the JS to say "flash is ready" and I realized, Firfox only renders swfs as they become visible. And To be honest - that's fine and actually, I am pretty sure that IE does this too. But the problem is that not only does Firefox not initialize the swf, Firefox doesn't even acknowledge the swf exists (expect for after onload) if it has not yet been visible. And the proof is that you get JS errors saying: "[FlashDOMID].FlashMethod is not a function". However, scroll down a little, wait until its visible and suddenly the trace starts lighting up "Flash Ready", "Flash Ready", "Flash Ready" and once they are all ready, everything works fine. Someone told me that FF does not init swf's until visible - can I force it? I can post code if you need...but its pretty heavy (hard to strip out the relevant from the rest) and I would like to avoid it (for your sakes) if possible. The question is simple - have you had this happen and if so, did you find a solution? Does anyone now how to force a not-yet-visible swf to initialize? Thanks guys.

  Read the article

• Are function-local typedefs visible inside C++0x lambdas?

  - by GMan - Save the Unicorns

  I've run into a strange problem. The following simplified code reproduces the problem in MSVC 2010 Beta 2: template <typename T> struct dummy { static T foo(void) { return T(); } }; int main(void) { typedef dummy<bool> dummy_type; auto x = [](void){ bool b = dummy_type::foo(); }; // auto x = [](void){ bool b = dummy<bool>::foo(); }; // works } The typedef I created locally in the function doesn't seem to be visible in the lambda. If I replace the typedef with the actual type, it works as expected. Here are some other test cases: // crashes the compiler, credit to Tarydon int main(void) { struct dummy {}; auto x = [](void){ dummy d; }; } // works as expected int main(void) { typedef int integer; auto x = [](void){ integer i = 0; }; } I don't have g++ 4.5 available to test it, right now. Is this some strange rule in C++0x, or just a bug in the compiler? From the results above, I'm leaning towards bug. Though the crash is definitely a bug. For now, I have filed two bug reports. All code snippets above should compile. The error has to do with using the scope resolution on locally defined scopes. (Spotted by dvide.) And the crash bug has to do with... who knows. :) Update According to the bug reports, they have both been fixed for the next release of Visual Studio 2010.

  Read the article

• SystemStackError in Rails::ActiveSupport::Callbacks

  - by coreyward

  I'm building a Rails app that connects to Dropbox and syncs with a folder to update a personal site. I'm using Rails 3.0.3, Ruby 1.9.2, and the Dropbox gem. Right now I have a DropboxAccounts Controller, and two models: DropboxSession, which wraps calls to the gem with application-specific functionality, and DropboxAccount, which stores the session and settings in the database. After the user authorizes their account with Dropbox they're redirected back over and the DropboxAccount is saved with the authorized session. That all works just fine. My problem is that when I try to call Dropbox::API#create_folder(any path) I end up with a SystemStackError in lib/activesupport/callbacks.rb:421 which refers to the code below. If I remove the call to create the folder, it works. If I call create folder from another request, it works. I doubled the stack size to 16K to no avail. # This is called the first time a callback is called with a particular # key. It creates a new callback method for the key, calculating # which callbacks can be omitted because of per_key conditions. # def __create_keyed_callback(name, kind, object, &blk) #:nodoc: @_keyed_callbacks ||= {} @_keyed_callbacks[name] ||= begin str = send("_#{kind}_callbacks").compile(name, object) class_eval <<-RUBY_EVAL, __FILE__, __LINE__ + 1 def #{name}() #{str} end # THIS IS LINE 421 protected :#{name} RUBY_EVAL true end end I'm not very familiar with Rails yet, and I'm not sure what the intention of the code above is or why it would cause a stack overflow. I'm not using any method_missing/ghost method magic in my code. I suspected it was something with a callback serialize :files but commenting it out did nothing. My DropboxAccount model contains only a call to belongs_to :user, and DropboxSession is just a handful of methods, none of which contain callbacks. Bypassing them and using the Dropbox::Session methods directly doesn't help. I hope someone on StackOverflow can help me with this stack overflow. ;)

  Read the article

• Runing bcdedit from python in Windows 2008 SP2

  - by Lee-Man

  I do not know windows well, so that may explain my dilemma ... I am trying to run bcdedit in Windows 2008R2 from Python 2.6. My Python routine to run a command looks like this: def run_program(cmd_str): """Run the specified command, returning its output as an array of lines""" dprint("run_program(%s): entering" % cmd_str) cmd_args = cmd_str.split() subproc = subprocess.Popen(cmd_args, stdout=subprocess.PIPE, stderr=subprocess.PIPE, shell=True) (outf, errf) = (subproc.stdout, subproc.stderr) olines = outf.readlines() elines = errf.readlines() if Options.debug: if elines: dprint('Error output:') for line in elines: dprint(line.rstrip()) if olines: dprint('Normal output:') for line in olines: dprint(line.rstrip()) errf.close() outf.close() res = subproc.wait() dprint('wait result=', res) return (res, olines) I call this function thusly: (res, o) = run_program('bcdedit /set {current} MSI forcedisable') This command works when I type it from a cmd window, and it works when I put it in a batch file and run it from a command window (as Administrator, of course). But when I run it from Python (as Administrator), Python claims it can't find the command, returning: bcdedit is not recognized as an internal or external command, operable program or batch file Also, if I trying running my batch file from Python (which works from the command line), it also fails. I've also tried it with the full path to bcdedit, with the same results. What is it about calling bcdedit from Python that makes it not found? Note that I can call other EXE files from Python, so I have some level of confidence that my Python code is sane ... but who knows. Any help would be most appreciated.

  Read the article

• C# functional quicksort is failing

  - by Rubys

  I'm trying to implement quicksort in a functional style using C# using linq, and this code randomly works/doesn't work, and I can't figure out why. Important to mention: When I call this on an array or list, it works fine. But on an unknown-what-it-really-is IEnumerable, it goes insane (loses values or crashes, usually. sometimes works.) The code: public static IEnumerable<T> Quicksort<T>(this IEnumerable<T> source) where T : IComparable<T> { if (!source.Any()) yield break; var pivot = source.First(); var sortedQuery = source.Skip(1).Where(a => a.CompareTo(source.First()) <= 0).Quicksort() .Concat(new[] { pivot }) .Concat(source.Skip(1).Where(a => a.CompareTo(source.First()) > 0).Quicksort()); foreach (T key in sortedQuery) yield return key; } Can you find any faults here that would cause this to fail?

  Read the article

• Displaying rectangles in game window with XNA

  - by blerh

  I want to divide my game grid into an array of rectangles. Each rectangle is 40x40 and there are 14 rectangles in every column, with a total of 25 columns. This covers a game area of 560x1000. This is the code I have set up to make the first column of rectangles on the game grid: Rectangle[] gameTiles = new Rectangle[15]; for (int i = 0; i <= 15; i++) { gameTiles[i] = new Rectangle(0, i * 40, 40, 40); } I'm pretty sure this works, but of course I cannot confirm it because rectangles do not render on the screen for me to physically see them. What I would like to do for debugging purposes is to render a border, or fill the rectangle with color so I can see it on the game itself, just to make sure this works. Is there a way to make this happen? Or any relatively simple way I can just make sure that this works? Thank you very much.

  Read the article

• Checkbox alignment in Internet Explorer, Firefox and Chrome

  - by Andrej

  Checkbox alignment with its label (i.e., vertical centering) cross different web browsers makes me crazy. Pasted below is standard html code: <label for="ch"><input id="ch" type="checkbox">My Checkbox</label> I tested different CSS tricks (e.g., link 1, link 2); most solutions works fine in FF, but are completely off in Chrome or IE8. I'm looking for any references or pointers to solve this issue. Thanks in advance. EDIT According to Elq suggestion I modified the HTML <div class="row"> <input type="checkbox" id="ch1" /> <label for="ch1">Test</label> </div> and CSS .row{ display: table-row; } label{ display: table-cell; vertical-align: middle; } Works now in Firefox, Internet Explorer 8, and Chrome on Windows. Fails on Firefox and Chrome on Linux. Also works in Firefox and Safari on Mac, but fails on Chrome.

  Read the article

• Images from url to listview

  - by Andres

  I have a listview which I show video results from YouTube. Everything works fine but one thing I noticed is that the way it works seems to be a bit slow and it might be due to my code. Are there any suggestions on how I can make this better? Maybe loading the images directly from the url instead of using a webclient? I am adding the listview items in a loop from video feeds returned from a query using the YouTube API. The piece of code which I think is slowing it down is this: Feed<Video> videoFeed = request.Get<Video>(query); int i = 0; foreach (Video entry in videoFeed.Entries) { string[] info = printVideoEntry(entry).Split(','); WebClient wc = new WebClient(); wc.DownloadFile(@"http://img.youtube.com/vi/" + info[0].ToString() + "/hqdefault.jpg", info[0].ToString() + ".jpg"); string[] row1 = { "", info[0].ToString(), info[1].ToString() }; ListViewItem item = new ListViewItem(row1, i); YoutubeList.Items.Add(item); imageListSmall.Images.Add(Bitmap.FromFile(info[0].ToString() + @".jpg")); imageListLarge.Images.Add(Bitmap.FromFile(info[0].ToString() + @".jpg")); } public static string printVideoEntry(Video video) { return video.VideoId + "," + video.Title; } As you can see I use a Webclient which downloads the images so then I can use them as image in my listview. It works but what I'm concerned about is speed..any suggestions? maybe a different control all together?

  Read the article

• Refreshing a JPA result list which is bound with a jTable

  - by exhuma

  First off, I hage to write this on my mobile. But I'll try to format it properly. In Netbeans I created a jTable and bound it's values to a JPA result set. This works great. The qery contains a param which i set in the pre-create box of the "query result" component. So just before netbeans creates the query result i write this: myQuery.setParameter("year", "1997"); This works fine. Now, I have an event handler which is supposed to change the param and display the new values in the table. So I do this: myQuery.setParameter("year", "2005"); myResultList.clear(); myResultList.addAll(myQuery.getResultList()); jTable1.updateUI(); This works, but it feels wrong to me. Note: the result set is bound to the table. So I was hoping there was something like this: myQuery.setParameter("year", "2005"); myResultList.refresh(); Is there something like this?

  Read the article

• SSRS code variable resetting on new page

  - by edmicman

  In SSRS 2008 I am trying to maintain a SUM of SUMs on a group using custom Code. The reason is that I have a table of data, grouped and returning SUMs of the data. I have a filter on the group to remove lines where group sums are zero. Everything works except I'm running into problems with the group totals - it should be summing the visible group totals but is instead summing the entire dataset. There's tons of articles about how to work around this, usually using custom code. I've made custom functions and variables to maintain a counter: Public Dim GroupMedTotal as Integer Public Dim GrandMedTotal as Integer Public Function CalcMedTotal(ThisValue as Integer) as Integer GroupMedTotal = GroupMedTotal + ThisValue GrandMedTotal = GrandMedTotal + ThisValue Return ThisValue End Function Public Function ReturnMedSubtotal() as Integer Dim ThisValue as Integer = GroupMedTotal GroupMedTotal = 0 Return ThisValue End Function Basically CalcMedTotal is fed a SUM of a group, and maintains a running total of that sum. Then in the group total line I output ReturnMedSubtotal which is supposed to give me the accumulated total and reset it for the next group. This actually works great, EXCEPT - it is resetting the GroupMedTotal value on each page break. I don't have page breaks explicitly set, it's just the natural break in the SSRS viewer. And if I export the results to Excel everything works and looks correctly. If I output Code.GroupMedTotal on each group row, I see it count correctly, and then if a group spans multiple pages on the next page GroupMedTotal is reset and begins counting from zero again. Any help in what's going on or how to work around this? Thanks!

  Read the article

• What is the procedure for debugging a production-only error?

  - by Lord Torgamus

  Let me say upfront that I'm so ignorant on this topic that I don't even know whether this question has objective answers or not. If it ends up being "not," I'll delete or vote to close the post. Here's the scenario: I just wrote a little web service. It works on my machine. It works on my team lead's machine. It works, as far as I can tell, on every machine except for the production server. The exception that the production server spits out upon failure originates from a third-party JAR file, and is skimpy on information. I search the web for hours, but don't come up with anything useful. So what's the procedure for tracking down an issue that occurs only on production machines? Is there a standard methodology, or perhaps category/family of tools, for this? The error that inspired this question has already been fixed, but that was due more to good fortune than a solid approach to debugging. I'm asking this question for future reference. Some related questions: Test accounts and products in a production system Running test on Production Code/Server

  Read the article

• Custom server control disappears from page when UpdatePanel updates

  - by Sasha

  Hi all. I created a custom asp.net server control. It works fine on a regular asp.net page and as a DOM object inside of the browser. But I've never used the UpdatePanel before and now I'm trying to make sure that this control works there as well. It doesn't. If I add my control to the page outside of an update panel and click some panel's inside button (trigger), everything works fine. But if I place my control inside of update panel and click that button again, the control "disappears" from the page completely. I still can see my control in javascript debugger and the update, meaning that the object itself is still in DOM. It looks like the panel just "hides" the outer div element of my control for some reason. I tried to call panel's Update() method on button click handler, set panel's UpdateMode to both Conditional and Always. All with the same result. How can I fix that? Thank you!

  Read the article

• Problem with impersonating a specific user in WCF service

  - by aJ

  I am having a WCF service hosted in IIS on WindowsServer 2008. This service needs to write to a shared folder present on another machine(Windows XP). The shared folder has write permissions for a particular user say "X" which is present on both the machines .i.e on the server where the service is running as well as the machine where the shared folder is present. The service runs under the NETWORK SERVICE account. For the service to access the shared folder I have added code to impersonate the user "X"in the service so that it gets the permission to write to the shared folder. Since I want to impersonate user "X" only when I run a particular section of code I have used the sample code. Even after the impersonation the service fails to write to the shared folder sometimes. It works sporadically. Whereas if I add tag in the Web.config file it works perfectly fine. <identity impersonate="true" userName="accountname" password="password" /> But the above is not desirable since it impersonates a specific user for all the requests. What I need is to impersonate a specific user only when I run a particular section of code. Also, the impersonation code works absolutely fine when the shared folder is present on another WindowsServer 2008. Could anyone give me ideas on what's going wrong here.

  Read the article

• HELP ME !! I am Not able to update form data to mysql using php and jquery

  - by Jimson Jose

  i tired and was unable to find the answer i am looking for an answer. my problem is that i am unable to update the values enterd in the form. I have attached all the files i'm using MYSQL database to fetch data. what happens is that i'm able to add and delete records from form using jquery and PHP scripts to MYSQL database, but i am not able to update data which was retrived from database. the file structure is as follows index.php is a file with jquery functions where it displays form for adding new data to MYSQL using save.php file and list of all records are view without refrishing page (calling load-list.php to view all records from index.php works fine, and save.php to save data from form) - Delete is an function called from index.php to delete record from mysql database (function calling delete.php works fine) - Update is an function called from index.php to update data using update-form.php by retriving specific record from mysql tabel, (works fine) Problem lies in updating data from update-form.php to update.php (in which update query is wrriten for mysql) i had tried in many ways at last i had figured out that data is not being transfred from update-form.php to update.php there is a small problem in jquery ajax function where it is not transfering data to update.php page. some thing is missing in calling update.php page it is not entering into that page I am new bee in programming i had collected this script from many forums and made this one.So i was limited in solving this problem i cam to know that this is good platform for me and many where we get a help to create new things.. please guide me with your help to complete my effors !!!!! i will be greatfull to all including ths site which gave me an oppurtunity to present my self..... please find the link below to download all files which is of 35kb (virus free assurance) download mysmallform files in ZIPped format, including mysql query thanks a lot in advance, May GOD bless YOU and THIS SITE

  Read the article

• What exactly does this PHP code do?

  - by Rob

  Alright, my friend gave me this code for requesting headers and comparing them to what the header should be. It works perfectly, but I'm not sure why. Here is the code: $headers = apache_request_headers(); $customheader = "Header: 7ddb6ffab28bb675215a7d6e31cfc759"; foreach ($headers as $header => $value) { // 1 $custom .= "$header: $value"; // 2 } $mystring = $custom; // 3 $findme = $customheader; // 4 $pos = strpos($mystring, $findme); if ($pos !== false) { // Do something } else{ exit(); } //If it doesn't match, exit. I commented with some numbers relating to the following questions: 1: What exactly is happening here? Is it setting the $headers as $header AND $value? 2: Again, don't have any idea what is going on here. 3: Why set the variable to a different variable? This is the only area where the variable is getting used, so is there a reason to set it to something else? 4: Same question as 3. I'm sorry if this is a terrible question, but its been bothering me, and I really want to know WHY it works. Well, I understand why it works, I guess I just want to know more specifically. Thanks for any insight you can provide.

  Read the article

• Can't serve HTML5 video through PHP on Safari/Mac (5.0)

  - by JKS

  I'm encountering a strange bug in Safari where, when I serve MP4 video through PHP (to obfuscate the file beneath the document root with a token-based authentication system), Safari for some reason fires the <video>'s onerror event, and the video never loads (I can't get any useful information out of the event object sent to onerror — everything is undefined). When I access the PHP script directly (i.e., the video is not embedded in a page), the video controls appear momentarily before flashing to a QuickTime question mark. When I access the MP4 file directly, it works as expected. What's bizarre is that the embedded video works perfectly in the latest version of Chrome for Mac. Here are the headers when accessed through PHP: Connection:Keep-Alive Content-Disposition:inline; filename="test.mp4" Content-Length:5558749 Content-Type:video/mp4 Date:Tue, 22 Jun 2010 01:24:25 GMT Keep-Alive:timeout=10, max=29 Server:Apache/2.2.15 (CentOS) mod_ssl/2.2.15 0.9.8l DAV/2 mod_auth_passthrough/2.1 FrontPage/5.0.2.2635 X-Powered-By:PHP/5.2.13 And here are the headers when test.mp4 is accessed directly: Accept-Ranges:bytes Connection:Keep-Alive Content-Length:5558749 Content-Type:video/mp4 Date:Tue, 22 Jun 2010 01:26:45 GMT Etag:"1c04757-54d1dd-489944c5a6400" Keep-Alive:timeout=10, max=30 Last-Modified:Tue, 22 Jun 2010 01:25:36 GMT Server:Apache/2.2.15 (CentOS) mod_ssl/2.2.15 0.9.8l DAV/2 mod_auth_passthrough/2.1 FrontPage/5.0.2.2635 The only differing headers are: Accept-Ranges (which I don't think is necessary), Etag, Last-Modified, Content-Disposition, and X-Powered-By. Not only can Chrome handle the PHP-served video fine, but when I use the same script to load the MP4 through a Flash player, it also works fine. I just can't figure out what Safari is choking on. EDIT: Also, when I change the content disposition to "attachment", Safari will download the MP4 file just fine.

  Read the article

• Lambda Functions in PHP aren't Logical

  - by Chacha102

  Note: I have condensed this article into my person wiki: http://wiki.chacha102.com/Lambda - Enjoy I am having some troubles with Lambda style functions in PHP. First, This Works: $foo = function(){ echo "bar"; }; $foo(); Second, This Works: class Bar{ public function foo(){ echo "Bar"; } Third, This works: $foo = new stdClass; $foo->bar = function(){ echo "bar"; }; $test = $foo->bar; $test(); But, this does not work: $foo = new stdClass; $foo->bar = function(){ echo "bar"; }; $foo->bar(); And, this does not work class Bar{ public function foo(){ echo "Bar"; } $foo = new Bar; $foo->foo = function(){ echo "foo"; }; $foo->foo(); // echo's bar instead of Foo. My Question is Why?, and how can I assure that both this: $foo->bar = function(){ echo "test"; }; $foo->bar(); and this $foo = new Bar; $foo->bar(); are called properly? Extra Points if you can point to documentation stating why this problem occurs.

  Read the article

• C# Multiple constraints

  - by John

  I have an application with lots of generics and IoC. I have an interface like this: public interface IRepository<TType, TKeyType> : IRepo Then I have a bunch of tests for my different implementations of IRepository. Many of the objects have dependencies on other objects so for the purpose of testing I want to just grab one that is valid. I can define a separate method for each of them: public static EmailType GetEmailType() { return ContainerManager.Container.Resolve<IEmailTypeRepository>().GetList().FirstOrDefault(); } But I want to make this generic so it can by used to get any object from the repository it works with. I defined this: public static R GetItem<T, R>() where T : IRepository<R, int> { return ContainerManager.Container.Resolve<T>().GetList().FirstOrDefault(); } This works fine for the implementations that use an integer for the key. But I also have repositories that use string. So, I do this now: public static R GetItem<T, R, W>() where T : IRepository<R, W> This works fine. But I'd like to restrict 'W' to either int or string. Is there a way to do that? The shortest question is, can I constrain a generic parameter to one of multiple types?

  Read the article

• Accessing red5 server outside the localhost

  - by user1039290

  I am new on red5 server so I stuck in. I am trying to record videos from webcam and save them in to my server. To do this, I installed red5 to my server. In addition, I also downloaded red5recorder and put it into my webapps folder. But there is any information about its implementation details. Whatever. So I go on with Red5 SimpleRecorder tutorial. Everything works fine when I tried in my server, but there is a problem when I try to connect to server from other computer to record a video. Actually, video recording is handled but the recorded video is not uploaded to the server. When I work in localhost it works fine, but from outside I couldn't be able to record or upload the video. I change the red5-web.properties document, and set virtual host to my server's IP but it again only works in localhost. What could be the reason? Is it about file permissions? or what could it be? Kind regards, Can

  Read the article

• waveInProc / Windows audio question...

  - by BTR

  I'm using the Windows API to get audio input. I've followed all the steps on MSDN and managed to record audio to a WAV file. No problem. I'm using multiple buffers and all that. I'd like to do more with the buffers than simply write to a file, so now I've got a callback set up. It works great and I'm getting the data, but I'm not sure what to do with it once I have it. Here's my callback... everything here works: // Media API callback void CALLBACK AudioRecorder::waveInProc(HWAVEIN hWaveIn, UINT uMsg, DWORD dwInstance, DWORD dwParam1, DWORD dwParam2) { // Data received if (uMsg == WIM_DATA) { // Get wav header LPWAVEHDR mBuffer = (WAVEHDR *)dwParam1; // Now what? for (unsigned i = 0; i != mBuffer->dwBytesRecorded; ++i) { // I can see the char, how do get them into my file and audio buffers? cout << mBuffer->lpData[i] << "\n"; } // Re-use buffer mResultHnd = waveInAddBuffer(hWaveIn, mBuffer, sizeof(mInputBuffer[0])); // mInputBuffer is a const WAVEHDR * } } // waveInOpen cannot use an instance method as its callback, // so we create a static method which calls the instance version void CALLBACK AudioRecorder::staticWaveInProc(HWAVEIN hWaveIn, UINT uMsg, DWORD_PTR dwInstance, DWORD_PTR dwParam1, DWORD_PTR dwParam2) { // Call instance version of method reinterpret_cast<AudioRecorder *>(dwParam1)->waveInProc(hWaveIn, uMsg, dwInstance, dwParam1, dwParam2); } Like I said, it works great, but I'm trying to do the following: Convert the data to short and copy into an array Convert the data to float and copy into an array Copy the data to a larger char array which I'll write into a WAV Relay the data to an arbitrary output device I've worked with FMOD a lot and I'm familiar with interleaving and all that. But FMOD dishes everything out as floats. In this case, I'm going the other way. I guess I'm basically just looking for resources on how to go from LPSTR to short, float, and unsigned char. Thanks much in advance!

  Read the article

• How can i mock or test my deferred execution functionality?

  - by cottsak

  I have what could be seen as a bizarre hybrid of IQueryable<T> and IList<T> collections of domain objects passed up my application stack. I'm trying to maintain as much of the 'late querying' or 'lazy loading' as possible. I do this in two ways: By using a LinqToSql data layer and passing IQueryable<T>s through by repositories and to my app layer. Then after my app layer passing IList<T>s but where certain elements in the object/aggregate graph are 'chained' with delegates so as to defer their loading. Sometimes even the delegate contents rely on IQueryable<T> sources and the DataContext are injected. This works for me so far. What is blindingly difficult is proving that this design actually works. Ie. If i defeat the 'lazy' part somewhere and my execution happens early then the whole thing is a waste of time. I'd like to be able to TDD this somehow. I don't know a lot about delegates or thread safety as it applies to delegates acting on the same source. I'd like to be able to mock the DataContext and somehow trace both methods of deferring (IQueryable<T>'s SQL and the delegates) the loading so that i can have tests that prove that both functions are working at different levels/layers of the app/stack. As it's crucial that the deferring works for the design to be of any value, i'd like to see tests fail when i break the design at a given level (separate from the live implementation). Is this possible?

  Read the article

• AIR File.resolvePath won't work anymore

  - by Palleas

  Hi all, I'm having a very strange issue, it looks like my application can't create file anymore. It works w/ directories, but the so-many-times-used resolvePath() methods doesn't. Here is what I do : var databaseFileContent : File = new File(File.desktopDirectory.nativePath + "/testing"); databaseFileContent.createDirectory(); databaseFileContent.resolvePath("test"); (Here I'm trying on desktop but that's the same w/ applicationStorageDirectory) When I execute this, it works only for the "testing" folder which is actually created, but my file isn't. I tried to create another application, doing this : trace(File.desktopDirectory.resolvePath("maiswtf.db").exists); trace(File.applicationStorageDirectory.resolvePath("wtf.db").exists); Both are displaying "false". Am I missing something here? I have another application with this code : var databaseFileContent : File = File.applicationStorageDirectory.resolvePath(File.separator + "sitra.db"); When I run this one, it works perfectly! My file is created at /sitra.db! Any hints? I thinks I'm going mad :/ Thanks!

  Read the article

• Codeigniter .htaccess not working in subdirectory

  - by xzdead

  I have this codeingniter project structure webRoot | |/application | | | |/controllers | | | |/admin | |/public | | | |/admin | | | | | |/css | | |/img | |/css | |/img And this is my .htacess file, located in /public. I use this in every local project running xampp: <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ index.php/$1 [L] </IfModule> <IfModule !mod_rewrite.c> # If we don't have mod_rewrite installed, all 404's # can be sent to index.php, and everything works as normal. # Submitted by: ElliotHaughin ErrorDocument 404 /index.php </IfModule> It works fine in localhost, but doesn't work in a dreamhost server. I always get "no input file specified". So after searching the web and trying lots of combinations, the best I got is this .htaccess file: Options +FollowSymLinks RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^ index.php [L] With this one, if I go to http://development.mydomain.com - I see the codeigniter welcome page But if I go to: http://development.mydomain.com/admin - I see the directory listing of /public/admin and doesn't execute the controller in /application/controllers/admin Again, if I go to: http://development.mydomain.com/admin/admin - I see the private area, it executes the controller and goes to the default controller defined in routes, "dashboard" This works fine too: http://development.mydomain.com/admin/dashboard I have set in my config file: $config['index_page'] = ''; $config['base_url'] = ''; $config['uri_protocol'] = 'AUTO'; I think that whatever is wrong in my .htaccess is causing other path issues I have with my project. Any help would be great. Thanks to all in advance EDIT: I removed this line: RewriteCond %{REQUEST_FILENAME} !-d because admin directory exists, that's why I see the public directory listing. But now I see the codeigniter welcome page when I go to http://development.mydomain.com/admin So now my .htaccess file looks like: Options +FollowSymLinks RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^ index.php [L] #RewriteRule ^(.*)$ /index.php?/$1 [L] I also tried with the commented RewriteRule but I get the same result.

  Read the article

• PyQt - How to connect multiple signals to the same widget

  - by Orchainu

  [ ]All1 [ ]All2 [ ]checkbox1A [ ]checkbox1B [ ]checkbox2A [ ]checkbox2B Based on the chart above, a few things need to happen: The All checkboxes only affect the on/off of the column it resides in, and checks on/off all the checkboxes in that column. All checkboxes work in pairs, so if checkbox1A is on/off, checkbox1B needs to be on/off If an All checkbox is checked on, and then the user proceeds to check off one or more checkbox in the column, the All checkbox should be unchecked, but all the checkboxes that are already checked should remain checked. So really this is more like a chain reaction setup. If checkbox All1 is on, then chieckbox1A and 2A will be on, and because they are on, checkbox1B and 2B are also on, but checkbox All2 remains off. I tried hooking up the signals based on this logic, but only the paired logic works 100%. The All checkbox logic only works 50% of the time, and not accurately, and there's no way for me to turn off the All checkbox without turning all already checked checkboxes off. Really really need help ... T-T Sample code: cbPairKeys = cbPairs.keys() for key in cbPairKeys: cbOne = cbPairs[key][0][0] cbTwo = cbPairs[key][1][0] cbOne.stateChanged.connect(self.syncCB) cbTwo.stateChanged.connect(self.syncCB) def syncCB(self): pairKeys = cbPairs.keys() for keys in pairKeys: cbOne = cbPairs[keys][0][0] cbOneAllCB = cbPairs[keys][0][4] cbTwo = cbPairs[keys][1][0] cbTwoAllCB = cbPairs[keys][1][4] if self.sender() == cbOne: if cbOne.isChecked() or cbTwoAllCB.isChecked(): cbTwo.setChecked(True) else: cbTwo.setChecked(False) else: if cbTwo.isChecked() or cbOneAllCB.isChecked(): cbOne.setChecked(True) else: cbOne.setChecked(False) EDIT Thanks to user Avaris's help and patience, I was able to reduce the code down to something much cleaner and works 100% of the time on the 1st and 2nd desired behavior: #Connect checkbox pairs cbPairKeys = cbPairs.keys() for key in cbPairKeys: cbOne = cbPairs[key][0][0] cbTwo = cbPairs[key][1][0] cbOne.toggled.connect(cbTwo.setChecked) cbTwo.toggled.connect(cbOne.setChecked) #Connect allCB and allRO signals cbsKeys = allCBList.keys() for keys in cbsKeys: for checkbox in allCBList[keys]: keys.toggled.connect(checkbox.setChecked) Only need help on turning off the All checkbox when the user selectively turns off the modular checkboxes now

  Read the article

< Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >