Search Results

Search found 9462 results on 379 pages for 'laptop repair'.

Page 141/379 | < Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >

• Acer aspire 5520 power light blinks no boot

  - by Shawn Mclean

  My laptop was working fine last night, I hibernated it and went to sleep. Got up, pressed the power button. The power light comes on for 4 seconds and the hdd light blinked a few times, then it turned off for a second then repeats the process. The only way to stop this process/power down is to remove the AC and take out the battery. It does not even reach a boot screen, nothing shows up on the screen, fan does not start. People on this forum has the same problem but they suggest to put the laptop in a oven and heat it (reflow). What could be the problem? Is there another solution other than a reflow? I dont feel like putting my motherboard in the oven.

  Read the article

• Can I get my video card to output a DVI and VGA signal at the same time?

  - by Roy Pardee

  Hey All, I've got: a lovely 24" monitor, w/both DVI and VGA inputs, a personal desktop w/a Radeon HD Pro 2400 video card (both DVI and VGA outputs) a work laptop w/both outputs, and a KVM switch that handles VGA only Right now I've got laptop connected to the monitor's VGA, and the desktop connected to the DVI. This works, but requires me to switch the KVM and monitor input sources separately, which annoys me (I switch back & forth a lot to make skype calls & manage my music). I'd like to feed both VGA and DVI signals out of my desktop so I can do quick things on my desktop & switch right back, but then when I'm done working, switch the monitor over to DVI to get the crisper picture. Alas, just attaching both VGA and DVI cables to my desktop's video card did not do the trick. Can this card be persuaded to output both signals at the same time? Many thanks! -Roy

  Read the article

• Diagnosing and debugging LAN congestion / connection issues

  - by John Weldon

  What are the top N tools / methodologies used to diagnose and repair network issues? Given a LAN, for example, where users are able to consistently ping an outside server, but any data intensive connections are flaky; how would you begin solving the network issues? I imagine issues like congestion, bandwidth constraints, throughput constraints, etc. are all factors, but I don't know how to diagnose those issues. I'm especially interested in LAN environments (rather than WAN)

  Read the article

• YouTube videos not working

  - by André

  I have a problem with watching YouTube videos. It says: "An error occurred, please try again later". I've tried loading different videos and that's what it says to all the videos I try to watch. I've tried using another browser, clearing cache + cookies etc, but none of that really worked out. My operating system is Windows 7 Home Premium, I use Google Chrome as my browser. And the YouTube videos was able to be watched earlier. I suspect that it has something to do with the PC, since I've got YouTube working on my laptop earlier. Not sure if it still works on my laptop though. Hope I've given enough information for you to help me out with this problem. Feel free to ask if there's anything else you need to know. Hope you can/will help me out. :)

  Read the article

• Lenovo Ideapad Y480 can't reinstall windows?

  - by elegantonyx

  Alright, so here's the deal... For a while, I wanted to mess with Linux. I don't know why, but I wanted to. So, what I did was use WUBI and install Ubuntu. Because of some unknown reason (Intel Rapid Start? Half the drivers being on a Lenovo-installed SSD [separate from the main hard drive]?) it wouldn't dual boot. So, I decided to use Linux Mint instead, and install it in a partition. Since Windows 7 Home Premium won't make partitions any more if you have a certain number already, I just shrank my system drive and left empty space for the installer to claim. When I installed Mint, it worked, but left my Windows 7 installation unable to boot and eventually it corrupted. I tried to use a system repair disc I burned earlier but it didn't find the Windows installation, so I assume the partition corrupted. I used this link:http://www.pcworld.com/article/248995/how_to_install_windows_7_without_the_disc.html to try and reinstall Windows. What happened was that originally it said that the partition I was trying to reinstall from had been locked down by the OEM (Lenovo). So, I went into GParted, wiped EVERYTHING, and selected 'Construct new Boot record' or whatever that function is, and now the error is: "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information." Does anyone know how to see the log files? Can anyone help? This system is a month old but the warranty only covers hardware failures, and I would need to pay around USD$60 for them to fix it. Please help. Any ideas? this is my main machine... Extra information: I have at my disposal: System Repair Disc (Burned myself) Windows 7 Home Premium 64 bit SP1 installation disk (burned from the pcworld links) Gparted Live CD Linux Mint 13 live cd A system backup (from the morning before this catastrophe) made using the Windows Backup and Restore. I put it on an external drive...that should be safe for now.

  Read the article

• Ubuntu not showing disk

  - by ojek

  I have a laptop which had broken windows 7 installed on it. I created a ubuntu live usb and tried installing ubuntu over that win7. After a few minutes, I got an error message, so I needed to restart the computer. Now the laptop says that there is no bootable device - reasonable message given that there was an error during linux installation. But: Bios can see my hard drive, When I start ubuntu in live mode, and try either sudo fdisk -l or gparted, it doesn't show any hard disk drives. I am 90% sure that hdd is broken, but it is wierd that bios can see it, and ubuntu doesn't. How can I be 100% sure about that hdd? Is there any additional way of detecting my hdd from ubuntu?

  Read the article

• Prolific USB-to-Serial Comm Port significantly slower under Windows 7 comparing to Windows XP

  - by Dmitry S

  I am using a Prolific USB-to-Serial adapter based on the Prolific chip to use with a device on serial port. I have the latest version of the driver installed: 1.3.0 (2010-7-15). When I use my device with this adapter on my main Windows 7 (32bit) system it takes 8-9 seconds to send a command through to the device. However, when I do the same thing on a different Windows XP system (an old laptop I borrowed for testing) it only takes 2-3 seconds. I have made sure that the port settings and other variables are the same between systems. I also tested on a third laptop (also running Windows 7) and again got a significant delay. So the question is if anyone else experienced the same problem and found a solution. I would like to avoid moving to an XP system for what I need to achieve so that's my last option.

  Read the article

• Colors differ in the dual monitor

  - by becomingGuru

  I use a dual monitor. The colors appear entirely different on the new monitor than they do on my laptop. When you are selecting colors etc, to be included in a website design, it totally freaks me out. Is there no software solution that finds how the settings of one of the monitor is and puts that to the second one? Otherwise what all settings do I need to change manually on the second monitor to make it appear as it does on the laptop? Thanks in advance.

  Read the article

• Cannot see main user profile directory on old vista hdd on win7

  - by chaoskreator

  I have an old laptop HDD that ran Vista that I need to get some pictures and movies off of. I've attached it via SATA cable to my new Win 7 (64 bit) machine and it mounts fine, except I can't see the main user profile in the D:\Users directory. I've changed ownership and permissions for the D: drive to my C:\ Username but still no luck. I read something about it being caused by the UAC being active on the Vista machine. Is this true? Is there a way to disable this and gain access to the main profile without putting it back into the old laptop (it's fried and won't boot)?

  Read the article

• Remote connection IP to use

  - by petwho

  I have two laptops that both run on ubuntu and installed ssh server and ssh client on them. One is usually on my desk at home and one I usually bring to my company. When I'm at home I can easily ssh to one from the other by typing this command (to login to the other laptop whose IP address is: 192.168.0.105) : ssh -p 22 [email protected] However, When I'm at my company, I try to type the same command and ofcourse it doesn't work. I understand that when at home I'm on LAN network, that my laptops actually using my ISP's address which differ from 192.168.0.107 asummed 203.113.131.1. So could you tell me what IP that ssh shoud use for my laptop (at work) to connet to my computer at home? Thank you.

  Read the article

• How to disable Microsoft eHome MCIR Keyboard and company?

  - by AndrejaKo

  Hi! I'm and unlucky owner of and Acer 7720G laptop which, like many in its category, has receiver for a proprietary infra red remote control device (which I did not receive with my laptop!) . Now my problem is that the receiver is detected as Microsoft eHome MCIR Keyboard, Microsoft eHome MCIR 109 Keyboard and Microsoft eHome Remote Control Keyboard keys. My problem is that this driver has incompatibilities with some programs I use like for example DosBox. When these devices are installed, they cause DosBox to incorrectly detect some keyboard buttons. The workaround is to remove or disable the 3 hardware devices. Unfortunately, I the disable option is grayed out and when I delete them, they are reinstalled on next restart. Is there any way to hack windows in order to prevent their installation? I was thinking about locating the drivers these devices use, but they are buried somewhere in windows installation and I don't have enough experience to find them, so I'm asking you for help.

  Read the article

• Windows 7 boot manager issue

  - by L.ppt

  I was having windows 7 installed on my laptop, yesterday I tried to install Open Suse operating system. During its installation I chose a NTFS partition and formatted it to ext4 filesystem. During installation an error came that mount point cannot be created on this partition and I aborted the installation. They on reboot a message came BootMgr is missing. I then reinstalled the windows but on complete installation when setup rebooted the system then a blank screen came with a cursor blinking. I went through many forums and learnt may startup repairs and commands but it continues to hang up at a blank screen with cursor blinking. Reinstalling new windows 7 is also not doing any effect. I urgently need to repair my laptop for very important work. Please Help

  Read the article

• Remote desktop connection

  - by mmh

  My work computer is running on Windows 7 Ultimate, and my home laptop is running on Windows 7 Home Premium. I want to connect my work computer from my home laptop, but whenever I try to do it gives me an error message saying: Remote desktop can't connect to the computer for one of the following reasons 1.Remote access to the server is not enabled. 2.The remote computer is turn off. 3.The remote computer is not available in the network. But when I tried to connect from my colleague's desktop I can connect to my computer. Please help me. I need to connect to my work computer from home.

  Read the article

• Can't ping devices by IP address for devices allocated IPs by DHCP

  - by GiddyUpHorsey

  I have a home network with a Trendnet wireless router and a Windows Domain. The Domain Controller/DNS server is a Windows 2000 Server and is configured to forward queries to DNS servers provided by the ISP. The router provides DHCP and is configured with the Windows 2000 Server as the DNS server. The network has been set up for a couple of years and usually works fine. When I connect iPhones to the network over WiFi, the router can ping the iPhones through its browser based admin interface, but Windows machines that are part of the Windows Domain cannot. A laptop was connected to the network over WiFi that wasn't joined to the domain and it could see the iPhones. The router UI shows that the laptop has a reserved IP allocated via DHCP. All machines either have a static or DHCP allocated IP on the 192.168.0.* subnet. Router - 192.168.0.1 - Static - Wired Windows Domain Controller - 192.168.0.8 - Static - Virtual Windows 7 Workstation - 192.168.0.200 - DHCP Auto - Wired VMWare ESXi Host - 192.168.0.201 - Static? - Wired iPhone 1 - 192.168.0.202 - DHCP Auto - WiFi iPhone 2 - 192.168.0.203 - DHCP Auto - WiFi Windows Vista Laptop - 192.168.0.204 - DHCP Reserved - WiFi Using the Windows 7 machine (200), I try to ping each machine and the only DHCP machine that responds is itself. The other DHCP machines fail with Reply from 192.168.0.200: Destination host unreachable.. Using nslookup fails with *** domain.controller.name can't find 192.168.0.203: Non-existent domain. Using the Windows 2000 Domain Controller (8), I try to ping each machine and the only DHCP machine that responds is the Windows 7 machine (200). Pinging the other DHCP machines fails with Request timed out.. Using nslookup also fails with *** domain.controller.name can't find 192.168.0.203: Non-existent domain. Using the iPhone 2 (203), I try to ping (Network Ping Lite) the machines with static IP addresses and that works fine. When I try to ping the Windows 7 machine (200) it is unable to get a response. How do I configure the DNS server/Windows Domain/Router properly so that the Windows Domain machines can see the IPs allocated via DHCP?

  Read the article

• Upgrading my home network to Gigabit Ethernet and Wireless-N turns out slower than before

  - by Raheel Khan

  My home network has three desktops, three laptops and some NAS drives. All desktops and NAS drives support Gigabit LAN and all laptops support Wireless-N. I was running a 100 BaseT switch though. I recently purchased a Gigabit Ethernet Switch and an Wireless-N ADSL Modem-Router. After upgrading, I noticed that the wireless file transfer speeds from laptop-to-NAS and vice versa became terribly slow. Possibly even slower than before the upgrade. The transfer speeds from desktop-to-NAS (wired) have improved though. As an example, copying a 50GB file from laptop-to-NAS was estimated at 15 hours! Is there something I can do to improve this? Also, should I consider buying a dedicated wireless access point for speed rather than using the Wireless modem-router?

  Read the article

• Should I get a desktop PC if I will move abroad

  - by alex

  Hello, This is probably a bit of a personal opinion style question - should I buy a desktop or a laptop? Generally I would prefer a desktop, since it's generally cheaper for the same specs, but it's about 50% likely that I will have to move to Japan (from UK) for a couple of years in two years or so. I have never heard of anyone travelling with a desktop - is it even possible without getting it destroyed? If anyone have experience in this area, could you suggest me if It's better to choose a laptop just for this reason? I don't really care about mobility on daily basis that much as I already have a netbook. Thanks for all the help and sorry if it's a bit off topic.

  Read the article

• Windows Vista Home Premium upgrade to Windows 7 Ultimate

  - by chugh97

  I have 2 laptops with Vista Home Premium editions. I bought the upgrade license from MS, to upgrade one of my laptops. I have upgraded one of the laptops fine. Now the question is, If I want to upgrade the second laptop but uninstall the windows 7 on the first one, would this be possible. I am only wanting to swap the OS onto the other laptop as the other one is faster. Is this possible? and if so how can it be done?

  Read the article

• Windows Vista Home Premium upgrade to Windows 7 Ultimate

  - by chugh97

  I have 2 laptops with Vista Home Premium editions. I bought the upgrade license from MS, to upgrade one of my laptops. I have upgraded one of the laptops fine. Now the question is, If I want to upgrade the second laptop but uninstall the windows 7 on the first one, would this be possible. I am only wanting to swap the OS onto the other laptop as the other one is faster. Is this possible? and if so how can it be done?

  Read the article

• Windows Vista home premium upgrade to Windows 7 ultimate

  - by chugh97

  I have 2 laptops with Vista Home Premium editions. I bought the upgrade license from MS, to upgrade one of my laptops. I have upgraded one of the laptops fine. Now the question is, If I want to upgrade the second laptop but uninstall the windows 7 on the first one, would this be possible. I am only wanting to swap the OS onto the other laptop as the other one is faster. Is this possible? and if so how can it be done?

  Read the article

• usb vs firewire for connecting two RAID 0 disks

  - by Arne

  I have a 2TB and a 4TB RAID 0 external drives (both have two physical hard drives in them). Both have a FW800, FW400, and USB port. My MacBook Pro has one FW800 port and two USB ports. I want to copy data from the 4TB drive to the 2TB drive. Is it better to A - connect both directly to the laptop, one with USB and one with FW800 or B - connect the 4TB drive to laptop with FW800 and the 2TB drive to the 4TB drive using a FW400 cable? Anyone have problems daisy-chaining RAID 0 disks using FW? Thanks!

  Read the article

• How do I connect to my wireless router settings on Linux?

  - by Joshua Robison

  My network is as follows: Internet Provider's DSL modem connected to Internet Provider's router connected to My Buffalo Wireless router connected to My Toshiba Laptop via WEP network My Toshiba Laptop is running LMDE Linux Mint Debian Edition Service Pack 3 i686 kernel I have experience using various routers and their configuration settings but for some reason I can not access my wireless router. In my cromium browser I tried the following ip addresses: Standard Usual IPs : 192.168.1.1, 192.168.0.1 (connection hangs and goes no where) On the back of my router: 192.168.11.1, 192.168.11.100 (connection hangs and goes nowhere ) In some tcpip info: 192.168.24.1 (unable to connect error message) If someone could give me some terminal commands that will help me find my wireless router address or some trouble shooting ideas, I would be very thankful.

  Read the article

• Windows Server 2008 R2 - What now?

  - by MrStatic

  So I installed Windows Server 2008 R2, I have Exchange 2010 running for some mail. I installed BlackBerry Enterprise Server Express for kicks. This server runs dns/dhcp for 2 laptops. But what now? It has 200g's free on the main drive and a 150g external that I have mapped as a network drive. I am not sure what else to do with this thing. It was my main station but since my laptop is nicer I am running it headless and using the lcd monitor for it as a second monitor for the laptop when I am at home.

  Read the article

• Ubuntu Newbie Needs Assistance!!

  - by Steve Greene

  New Ubuntu User Needs Help!- version 9.10 does not communicate with laptop Hello folks, Several days ago, I installed Ubuntu 9.10 onto my Acer Aspire 3100 laptop, running it alongside Widows Vista as a dual-bootable system. Creation of the Ubuntu boot CD went fine, and the installation onto my hard drive was flawless. Ubuntu opens and behaves as I would expect, except for one little problem. For reasons unknown to me, Ubuntu is not communicating with my laptop's networking hardware, and I have no internet connectivity, even when sitting directly under the wireless router at the local library (literally), which puts out a wickedly-fast signal that my Windows Vista OS auto-detects and immediately connects to. Up in the right side of the Ubuntu desktop, I click on the network icon and it does not show a wireless connection at all, even though I am only a few feet from the router. At home, where I use a dialup modem, I also see no means of getting online. My modem is an HDAUDIO Soft Data Fax Modem with Smart CP,manufactured by CXT (Conexant Systems Inc., file version 4.0.13.0, and the driver version is 7.58.0.0). I desparately wish to convert to Ubuntu. I used Mac for ten years, and then Windows for ten years. Now, after 20 years, I want to live out my days as an open-source Ubuntu fanatic. I am ready to give the old status quo the boot! I am an advanced computer user, but I am not a programmer. I seek a solution that is user-friendly for normal people, something equivalent to a driver that I can easily install or activate that will allow Ubuntu to see my hardware and get me connected. Can anyone help me over this hopefully-little glitch so that I can move on in total Ubuntu bliss? My processor is a Mobile AMD Sempron Processor 3500+ at 1.80 GHz, 1.50 GB RAM, and a 32-bit Operating System. I am running Windows Vista Home Basic, Service Pack 2. My current email is [email protected] if you have a workable solution that does not require programmer status to implement. Surely this must be a simple fix that I simply am overlooking, but being the new guy on the block, I have yet to be enlightened. Thanks for your help in coming up to speed!! Steve Wanna' be Ubuntu Fanatic "If you're not living on the edge, you're taking up too much space."

  Read the article

• Trust Bluetooth 4.0 and Bluetooth Headset

  - by Seregwethrin

  Firstly, I'm writing this after 5 hours of nonstop struggle to make it work, so I searched into the deepest websites from Google, and tried many things. I have Trust Bluetooth 4.0 USB adapter (link) Samsung HM1500 Bluetooth Headset Windows 7 64-bit Desktop PC Facts Nothing wrong with the headset. (it works, tested on a phone and a laptop. Problem is all about bluetooth dongle and its driver.) Trust BT adapter can send and receive files even without any driver. I can pair successfully without any driver too. In Headset's Properties, Services tab, Handsfree and Headset services are checked. Problem When I pair with my BT headset, I cannot see it as a sound playback device. Also when I double-click the headset device icon in Bluetooth Devices, in laptop: it opens a connection window where I can connect and disconnect to that device - perfect! in desktop: it opens the properties window, even though Handsfree and Headset services are checked (I check them explicitly, in laptop they came as already checked) - Problem! Unsuccessful driver installations The driver on the Trust's website says "Error 1606 Could not access Network Location" on start, so it doesn't get installed. The driver on Broadcom (link) is being closed with Windows's that classic "has stopped working" error on validation step, so it doesn't get installed too. (Those tests made more than once) Successful installation In the Win64 folder of Trust's driver from their website, if I install through "BTW.msi", it doesn't give me Error 1606 and it gets installed. Then the problem: When I try to start bluetooth from start menu (or it gets started at Windows startup), an error popup says: "BtBalloon.dll is missing..." so it doesn't start. I found BBalloon.dll in the driver folder, I renamed it to BtBalloon.dll, moved into Windows/system32 and Windows/SysWOW64 folders, and it seems working. Or maybe it gets closed behind the scenes. The bluetooth icon is there with or without this driver since Windows has it. Bluetooth Peripheral Device First it didn't get installed from Windows Update. After, I showed the driver folder path in Device Manager and pressed "Explore in this location". Surprisingly, it's being found as "Handsfree" driver. Now even I uninstall the drivers, it still can see the Handsfree. But still, no playback device. Any ideas to guide me? I'm out of ideas.

  Read the article

• Sync Windows Live Mail between two computers

  - by Jesper

  Hi, I have a laptop where I have been using Windows Live Mail as my email application for the last year. Yesterday I got a dell desktop as well and I am desperatly trying to set up so my desktop and laptop sync the email between each other. Im using Super Flexible Synchronizer to sync the email storage folder to a NAS on my network, so when setting up the desktop naturally I set it up to download all from the NAS. But each time I open Windows Live Mail on the new machine, some emails suddenly come in duplicates, one is read, the other is not. I have ran through the registry on the new machine and updated an ID i found, in 3 places, one being: C:\Users\\AppData\Local\Microsoft\Windows Live Contacts{blah blah blah}\DBStore\contacts.edb Still doesnt seem to be enough. Does anyone have any tips or ideas how to sync Windows Live Mail between two computers without duplicates and weird behaviour etc. grateful for your help, jesper

  Read the article

< Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >