Search Results

Search found 11427 results on 458 pages for 'live cd'.

Page 141/458 | < Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >

• Connect to Nonencrypted Wireless Network Using Ubuntu Commands

  - by Tim

  I failed to connect to an open i.e. nonencrypted wireless network using Ubuntu command lines. Here is what I did: $ sudo /etc/init.d/NetworkManager stop * Stopping network connection manager NetworkManager [ OK ] $ sudo /sbin/ifconfig wlan0 up $ sudo iwconfig wlan0 essid "Cavalier High-Speed 866-4-CAVTEL" $ sudo dhclient wlan0 There is already a pid file /var/run/dhclient.pid with pid 10812 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ wmaster0: unknown hardware address type 801 wmaster0: unknown hardware address type 801 Listening on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on Socket/fallback DHCPREQUEST of 192.168.1.67 on wlan0 to 255.255.255.255 port 67 DHCPREQUEST of 192.168.1.67 on wlan0 to 255.255.255.255 port 67 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 21 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 6 No DHCPOFFERS received. Trying recorded lease 192.168.1.67 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. --- 192.168.1.1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms Trying recorded lease 192.168.1.45 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. --- 192.168.1.1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms No working leases in persistent database - sleeping. $ sudo /sbin/iwconfig wlan0 wlan0 IEEE 802.11bg Mode:Managed Frequency:2.422 GHz Access Point: Not-Associated Tx-Power=27 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I was wondering what the problem is and how I can do it right? Thanks and regards!

  Read the article

• Migrate Windows Server 2008 to a new hard disk

  - by MainMa

  Hi, I have a machine with Windows Server 2008. I want to change the hard disk drive, but keep everything else. I don't have a cd/dvd drive and don't want to buy it. My first idea was to make a byte-to-byte copy of the disk with Paragon Advanced Recovery. The problem is that when I try to boot from a new hard disk, it says that there were hardware changes and that Windows must be repaired, inviting me to insert the installation disk and follow repair instructions. I searched and found that 1:1 copy is not a correct way to do things. The correct one is to restore Windows to a new hard disk from a full system backup. But to restore, I need to have a dvd drive. I tried to make a copy of the Windows Server 2008 .iso on an USB flash drive, but the drive is not bootable (while the same procedure applied to Paragon Advanced Recovery ISO produces a bootable recovery USB flash drive). Now what else can I do (except buying a dvd drive)? Is there a way either to make Windows work without doing recovery or recover Windows 2008 without using a cd drive?

  Read the article

• Creating a bootable USB drive from a distro split over two DVD ISOs

  - by Kev

  I am searching and not finding the right way to do this. Please note, I don't think I'm trying for anything strange here. I just want to make a bootable USB stick of a single OS that happens to be larger than one DVD and happens to be larger than FAT32 will allow for in a single file. On our slow connection I spent a long time downloading CentOS 5.9's two DVD ISOs: CentOS-5.9-x86_64-bin-DVD-1of2.iso (4.4 GB) CentOS-5.9-x86_64-bin-DVD-2of2.iso (718 MB) I have a USB stick that I want to somehow get these two ISOs on. Since the first one is 4.4 GB, I can't use ISO2USB because it insists on FAT32. I cannot find an alternative that lets you specify more than one ISO image--of the same distro, I'm not trying for some fancy multi-boot thing--to put on the same stick. I guess I should have downloaded the CD ISOs, but I thought I was "saving time" because then I wouldn't have as many files to run through the md5 checker. There's no IMG file of the whole thing (only a net install version, which I don't want--I want to pre-download everything) otherwise I would've gone for that. So, given that I have these two DVD ISOs, how can I get them on a stick that will boot and make use of both of them properly to install CentOS somewhere? Again, I don't think this is anything out of the ordinary, yet I can't find software/docs that seem to support this. Am I stuck re-downloading everything in CD-sized ISOs just to do this? I found this, but it doesn't run on Windows. I am using Windows to prepare the stick.

  Read the article

• Failure to obtain IP with ARP over Wi-Fi with personal Wi-Fi router in client mode

  - by axk

  I'm trying to connect a Samsung TV to the Internet using a TL-MR3020 personal wireless router in client mode. The TV fails to connect to the network. It sees the ethernet cable connected though. Here's my network topology: Here's what I've captured with Wireshark filtering for ARP (eth.type == 0x0806): It appears the TV fails to get the IP of the gateway (DSL modem/router) for some reason. One thing I've noticed is that the source MAC for the ARP requests coming from the TV is the MAC of the Portable wireless router (that is cd:89:00), not the TV itself and the modem sends the responses to that MAC (I'm not an expert and don't know if its okay or it may make the TV fail to get the requested IP). Also I'm able to ping the TV from the DSL router (through the telnet interface) and the router has an entry in its MAC table for the TV's IP with the Portable wireless router's MAC (that is cd:89:00). If I'm able to ping the TV I suppose it should know the router's MAC to respond to the ping, but then why these continuous ARP requests... I've also tried to connect my desktop trough this Portable wireless router the same way I'm trying to connect the TV and it works fine, I can set the DSL Modem's IP as the default gateway on the desktop's NIC and connect to the Internet. The TV can connect to the Internet when connected to the DSL Router with a wired connection. Any suggestions on what may be the cause of the problem / how to further debug it are welcome. Thanks!

  Read the article

• Computer always freezing after random periods of time. No errors listed.

  - by Wesley

  Hi, all. Here are my specs beforehand: AMD Athlon XP 2400+ @ 2.00 GHz, 160GB IDE HDD, 128MB GeForce 6200 AGP, 2 x 512MB PC3200 DDR RAM, CoolMax 350W PSU, 1 x CD-RW Drive, 1 x DVD-ROM Drive, FIC AM37 Mobo, Windows XP Pro SP3 My desktop freezes after random periods of time but there are no errors listed in the Event Viewer after a forced shutdown and restart. A couple months ago, I found that when it froze, the floppy was being accessed at the same time. So, I disconnected the floppy (since I never used it anyways) from the power supply and motherboard. Everything was working fine and the computer never froze. This past Christmas break, I left for a Conference and when I got home, the computer kept freezing again. So, this time, I just disconnected the DVD reader (from mobo and power) and started it up. Still, it froze almost right away. Then I found some older sticks of RAM (2 x 256MB PC2100 DDR) and swapped them in. Everything worked fine again after that. I even swapped the 2 x 512MB PC3200 DDR RAM back in and everything worked okay. Then it started freezing again, and I tried all possible RAM combos, still freezing within 5-10 minutes of startup. One thing I've realized is that the floppy drive is still listed in My Computer and I uninstalled it from my Device Manager already. There were no software errors, and I uninstalled the most recent software, with no effect. Still, I have no idea what is wrong because everything ran fine before that. Any suggestions? EDIT: Still have yet to buy some blank CD media to use Memtest86+. However, would a lack of virtual memory cause the computer to freeze? EDIT2: So after a long time, I ran Memtest86+ and all is well. Turns out though, after removing my original DVD reader and replacing it with a DVD-ROM drive, there is no freezing whatsoever! Thanks for all your suggestions!

  Read the article

• Connect to WEP Wireless Network by command line on Ubuntu

  - by Tim

  Hi, I am a newbie to both network and Linux. I am now trying to connect to a WEP wireless network by command line on my Ubuntu 8.10, because the Network Manager does not support 64 bit WEP. (1) I firstly bring down the Network Manager and then try to connect to a wireless network, whose essid is candy and password is 5673212741. But it fails as shown in the following. I wonder why and how to do it correctly? $ sudo /etc/init.d/NetworkManager stop * Stopping network connection manager NetworkManager [ OK ] $ sudo iwconfig wlan0 essid candy opendo iwconfig wlan0 key 18018ce78e open $ sudo iwconfig wlan0 key 5673212741 open $ sudo dhclient wlan0 There is already a pid file /var/run/dhclient.pid with pid 9971 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ wmaster0: unknown hardware address type 801 wmaster0: unknown hardware address type 801 Listening on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on Socket/fallback DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 20 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 9 No DHCPOFFERS received. No working leases in persistent database - sleeping. $ ping www.bbc.co.uk ping: unknown host www.bbc.co.uk (2) A less important question: why the scan for wireless networ does not work after I bring down the Network Manager? $ sudo /etc/init.d/NetworkManager stop * Stopping network connection manager NetworkManager [ OK ] $ sudo iwlist wlan0 scan wlan0 Interface doesn't support scanning : Network is down Thanks and regards!

  Read the article

• Booting an Asus EeePC from a LiveCD USB stick

  - by Bryan

  I have two identical Asus EeePC netbooks that are both installed with Ubuntu. One of them was sitting on the closet shelf and the battery went completely dead. When I charged the battery and tried to boot the it, I got the "No init found" error. In trying to follow the suggested way to fix it posted here, I used the Startup Disk Creator on my Ubuntu 11.10 desktop machine to create a USB stick with a bootable Ubuntu 11.10 live CD on it (the netbook doesn't have a CD drive). I plugged the USB stick into the netbook with the init issues, went into the BIOS and selected the USB stick as the 1st choice to boot from, and did a hard restart. It then just stuck at the flashing underscore. Not knowing why it wasn't working, I tried booting my working netbook from the USB stick. When I got into the BIOS on the working netbook, I noticed the description in the boot order section for the USB device was different. On the non-working netbook, the description was SWISSBIT (the name of the USB stick) but on the working netbook it was just "Rem. Drive". I also noticed on the working netbook there was an additional option under the bootable order section that allowed me to choose which hard drive to boot from. This section showed two hard drives, one of them being my USB stick. So, rather than changing the device boot order, I selected the USB stick as the hard drive to boot from first and it worked like a champ - I was able to boot into the LiveCD on the USB stick. Seems to me the working netbook is seeing the LiveCD USB stick as a hard drive, where-as the non-working netbook is seeing it as a plain ol' USB stick. The BIOS is the exact same version on both netbooks... any idea why it works on one and not on the other?

  Read the article

• Asus PCE-N53 11n N600 PCI-E Adapter on 3.x kernel

  - by CITguy

  Problem ASUS PCE-N53 wireless NIC doesn't work for latest versions of the linux kernel. How do I get it working on my system? (Note: I'm posting the answer I've found for others to use.) Installing Driver for Linux 3.x Kernel ASUS provides Linux drivers from their website, but it mentions that the driver supports "Linux Kernel 2.6.x", so it won't work without a some modifications to the driver code. Fortunately, an archlinux forum mentions similar problems and one user was able to create a patch for kernel 3.8.x that seems to work with kernel 3.11.x. Here's how I got it working: Prerequisites Ubuntu: sudo apt-get install build-essential Arch: sudo pacman -S base-devel Steps: 1. Download the driver from the ASUS website The download can be found under "Support Drivers & Tools". 2. Unzip the contents of the downloaded file cd into the new directory 3. Patch The arch forum mentions a 3.8 patch file that needs to be downloaded. Download rt5592sta_fix_64bit_3.8.patch to the current directory. tar -xvf {driver_source.tar.gz} cd into the directory created in previous step patch -p1 < ../rt5592sta_fix_64bit_3.8.patch 4. Compile NOTE: You will need to use sudo for it to compile properly. sudo make sudo make install sudo modprobe rt5592sta 5. Enjoy If all is well, you should now have a working card.

  Read the article

• vim does not preserve symlink over sshfs

  - by HighCommander4

  I'm having some trouble with symlinks and sshfs. I use the '-o follow_symlinks' option to follow symlinks on the server side, but whenever I edit a symlinked file on the client side with vim, a copy of it is made on the server side, i.e. it's no longer a symlink. Set up a symlink on the server side: me@machine1:~$ echo foo > test.txt me@machine1:~$ mkdir test me@machine1:~$ cd test me@machine1:~/test$ ln -s ../test.txt test.txt me@machine1:~/test$ ls -al test.txt lrwxrwxrwx 1 me me 11 Jan 5 21:13 test.txt -> ../test.txt me@machine1:~/test$ cat test.txt foo me@machine1:~/test$ cat ../test.txt foo So far so good. Now: me@machine2:~$ mkdir test me@machine2:~$ sshfs me@machine1:test test -o follow_symlinks me@machine2:~$ cd test me@machine2:~/test$ vim test.txt [in vim, add a new line "bar" to the file] me@machine2:~/test$ cat test.txt foo bar Now observe what this does to the file on the server side: me@machine1:~/test$ ls -al test.txt -rw-r--r-- 1 me me 19 Jan 5 21:24 test.txt me@machine1:~/test$ cat test.txt foo bar me@machine1:~/test$ cat ../test.txt foo As you can see, it made a copy and only edited the copy. How can I get it to work so it actually follows the symlink when editing the file?

  Read the article

• Ubuntu 13.10 - How to disable LVM and cryptsetup? cryptsetup: evms_activate is not available

  - by NeverEndingQueue

  I am trying to remove whole drive encryption from my Ubuntu installation. I've run Ubuntu from Live CD, mounted crypt partition and copied it to another partition /dev/sda3. sudo cryptsetup luksOpen /dev/sda5 crypt1 sudo dd if=/dev/ubuntu-vg/root of=/dev/sda3 bs=1M After that I've run boot-repair: https://help.ubuntu.com/community/Boot-Repair Added entry to /etc/fstab: UUID=<uuid> / ext4 errors=remount-ro 0 1 Of course I've replaced with blkid result of my /dev/sda3. I've also deleted overlayfs and tmpfs lines from /etc/fstab. (I've just compared it to content of /etc/fstab in non-encrypted Ubuntu installation and could not find overlayfs and tmpfs). I've chrooted from LiveCD into my system and rebuilt initramfs: http://blog.leenix.co.uk/2012/07/evmsactivate-is-not-available-on-boot.html I've also removed cryptsetup using apt-get remove. Basically I can easily mount my system partition from Live CD (without setting up the encryption and LVM stuff), but can not boot from it. Instead I see: cryptsetup: evms_activate is not available When I've chosen the Recovery mode I've seen this: Begin: Mounting root file system ... Begin: Running /script/local-top ... Reading all physical volumes. This may take a while ... No volume groups found cryptsetup: evms_activate is not available Begin: Waiting for encrytpted source device ... My /etc/crypttab is empty. I am pretty sure that system tries to find encrypted partition, search for LVMs etc. Do you have ideas what could be the problem or how can I fix it? Thanks

  Read the article

• what type of laptop do I need to run a amd64 or i386 VM?

  - by Frank Schwieterman

  I was running an amd64 build of Ubuntu on a VM on a Windows host which was also amd64. Later I found I could not run the same amd64 iso on my laptop, which is intel without hyper-V. I was confused I thought chipset mattered, but maybe it does not. When buying a PC or Apple, is there anything to check about the chipset to make sure it can run different types of VMs? In my case, I was trying to run ubuntu on a Thinkpad T520. Per answer below, I did need to enable some bios settings. I'm still having some issues. Running ubuntu on virtual box, when I try to use ubuntu-12.10-server-amd64.iso for the CD/DVD device to start a new VM, virtualbox complains "Failed to open the CD/DVD image . Could not get the storage format of the medium (VERR_NOT_SUPPORTED). When I try to use ubuntu-12.10-server-i386.iso the ISO is accepted, but then the VM complains "FATAL: No bootable medium found! System halted." I had been using an amd64 iso on my home PC which is amd64 and it works fine, which is why I suspected CPU mismatch was the problem at first. But it seems like I'm having issues, and maybe this superuser thread can be used to verify the cpu is irrelevant in this case.

  Read the article

• Windows XP cannot read DVD burned on Ubuntu

  - by webcrawl

  The story : I have burned a DVD disc on Ubuntu using Brasero. When file burning was complete, I canceled the burning of checksum to DVD. Then I put that DVD on Windows XP (SP3) and copied all the files from DVD to the hard drive (no errors when copying). When that was done I discovered that all copied files are not readable. What is more, all the files on that DVD also shown to be not readable, even though all file names, directories were in their place. What I found out? Windows detect that the disc is in CDFS (CD-ROM File System). Disc is clean as new, have no scratches. All files while opened in Notepad++ look like "NULNULNULNULNUL" in one line. The size of files is normal. Other discs that are recognized as CDFS can be read with no problems. What I tried? Starting CDFS service in Windows registry. Result - a new device in Windows Device Manager (JUBS JGH2ZCT SCSI CdRom Device). Removing my CD/DVD device from Device Manager. Result - Windows restarted the system and reinstalled the driver. So... how to read the DVD, when I have no access to any other PC, any other OS?

  Read the article

• Why dd finishes instantly when pipelining to cat?

  - by agsamek

  I start bash on Cygwin and type: dd if=/dev/zero | cat /dev/null It finishes instantly. When I type: dd if=/dev/zero > /dev/null it runs as expected and I can issue killall -USR1 dd to see the progress. Why does the former invocation finishes instantly? Is it the same on a Linux box? * Explanation why I asked such stupid question and possibly not so stupid question I was compressing hdd images and some were compressed incorrectly. I ended up with the following script showing the problem: while sleep 1 ; do killall -v -USR1 dd ; done & dd if=/dev/zero bs=5000000 count=200 | gzip -c | gzip -cd | wc -c Wc should write 1000000000 at the end. The problem is that it does not on my machine: bash-3.2$ dd if=/dev/zero bs=5000000 count=200 | gzip -c | gzip -cd | wc -c 13+0 records in 12+0 records out 60000000 bytes (60 MB) copied, 0.834 s, 71.9 MB/s 27+0 records in 26+0 records out 130000000 bytes (130 MB) copied, 1.822 s, 71.4 MB/s 200+0 records in 200+0 records out 1000000000 bytes (1.0 GB) copied, 13.231 s, 75.6 MB/s 1005856128 Is it a bug or am I doing something wrong once again?

  Read the article

• Encrypted Windows 7 & Linux Advice Wanted

  - by Miles

  I would like to set up my laptop to dual boot Arch Linux and Windows 7 with file sharing and encryption. Just wanted some advice on going about this because I have not dealt with encryption nor file sharing. I have two 500GB hard drives, and this is my plan: Install Windows 7 across both hard drives Use a live CD to wipe out Windows boot loader and replace with Grub Legacy Use live CD to wipe out second hard drive and re-size the Windows partition located on first hard drive Install Arch Linux along side with Windows 7 on first hard drive, all remaining space goes to home folder as ext2 Install truecrypt and ext2fsd Concerns: Is this the most efficient way to share files between both OSes? Or should I just be using NTFS to store all my data? How would the file permissions work when sharing files between Windows and Linux? Is there a high likley hood of corruption, and what is the ease of backing up files from an encrypted disk? Anything I should look out for, conflict between Grub and Truecrypt? Thank you for any advice, and feel free to post any links you might find useful to me. I am trying to plan this out so I can minimize downtime as I do not want to spend more than a night on this, nor do I want to run into a major problem some time in the future.

  Read the article

• Decrease in disk performance after partitioning and encryption, is this much of a drop normal?

  - by Biohazard

  I have a server that I only have remote access to. Earlier in the week I repartitioned the 2 disk raid as follows: Filesystem Size Used Avail Use% Mounted on /dev/mapper/sda1_crypt 363G 1.8G 343G 1% / tmpfs 2.0G 0 2.0G 0% /lib/init/rw udev 2.0G 140K 2.0G 1% /dev tmpfs 2.0G 0 2.0G 0% /dev/shm /dev/sda5 461M 26M 412M 6% /boot /dev/sda7 179G 8.6G 162G 6% /data The raid consists of 2 x 300gb SAS 15k disks. Prior to the changes I made, it was being used as a single unencrypted root parition and hdparm -t /dev/sda was giving readings around 240mb/s, which I still get if I do it now: /dev/sda: Timing buffered disk reads: 730 MB in 3.00 seconds = 243.06 MB/sec Since the repartition and encryption, I get the following on the separate partitions: Unencrypted /dev/sda7: /dev/sda7: Timing buffered disk reads: 540 MB in 3.00 seconds = 179.78 MB/sec Unencrypted /dev/sda5: /dev/sda5: Timing buffered disk reads: 476 MB in 2.55 seconds = 186.86 MB/sec Encrypted /dev/mapper/sda1_crypt: /dev/mapper/sda1_crypt: Timing buffered disk reads: 150 MB in 3.03 seconds = 49.54 MB/sec I expected a drop in performance on the encrypted partition, but not that much, but I didn't expect I would get a drop in performance on the other partitions at all. The other hardware in the server is: 2 x Quad Core Intel(R) Xeon(R) CPU E5405 @ 2.00GHz and 4gb RAM $ cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 32 Lun: 00 Vendor: DP Model: BACKPLANE Rev: 1.05 Type: Enclosure ANSI SCSI revision: 05 Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: DELL Model: PERC 6/i Rev: 1.11 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: CD-ROM GCR-8240N Rev: 1.10 Type: CD-ROM ANSI SCSI revision: 05 I'm guessing this means the server has a PERC 6/i RAID controller? The encryption was done with default settings during debian 6 installation. I can't recall the exact specifics and am not sure how I go about finding them? Thanks

  Read the article

• Ubuntu 10.04 on virtualbox gives error: Target filesystem doesn't have /sbin/init \ No init found. Try passing init= bootarg

  - by Philip

  I'm a linux newbie and the only reason I have it installed is so I can stop having Windows incompatibility issues with Ruby on Rails. Having said that, it sure has been nice, and much faster, and I don't think I'll be doing any Winrails stuff anytime soon. So I created a virtualmachine using virtualbox and have had ubuntu on it for the last 3 weeks. Recently ubuntu asked if it could update a few things, I clicked 'ok'. Now it won't boot and I get this error: *mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory ... Target filesystem doesn't have /sbin/init. No init found. Try passing init= bootarg BusyBox v1.13.3... (initramfs) _ * So I cruised the forums and there are a variety of solutions, but they all have to do with booting from the live cd. (which I assume is the ISO image I used to install ubuntu in the first place). But when I boot from that CD, it just hangs on the ubuntu screen, and the little dots keep cycling white to red, but it hung there for an hour so I think it was stuck. Not sure what I can do; can I do anything from the busybox shell (or whatever that is) to fix things? The thing is, it took about 10 hours to get everything the way I needed with all the gems and whatnot. And I didn't really write down what I tweaked, and I'm middle aged, so all that information has leaked out by now and I don't want to do it again. I'd really like to repair my existing install. One question you might have is, is there something wrong with the ISO? I don't think so, because I made a new virtual machine and used that same iso file to install a fresh ubuntu. Any help much appreciated. Phil

  Read the article

• SVN client too old after I used sshfs

  - by johnlai2004

  I have a svn checked out web application on a shared hosting linux server. The linux server has an svn client that I can access via ssh. From my localhost, I did the following > sshfs [email protected]:webappdir/ /media/webapp > cd /media/webapp > svn update svn: Working copy '.' locked svn: run 'svn cleanup' to remove locks (type 'svn help cleanup' for details) > svn clean up It's been 15 minutes and the svn clean up still isn't finished. I think it may have froze. So then I did the following: > ssh [email protected] > cd webappdir > svn update svn: This client is too old to work with working copy '.'; please get a newer Subversion client So now I can't update my webappdir because my /media/webapp is stuck on svn clean up, and my shared hosting server's svn client is out of date. I don't have privileges to install a new svn client on the shared hosting server. How do I get my svn update to work?

  Read the article

• Trying to delete a directory stored on a Windows server, from on a Mac, containing files created on the Mac, getting "Directory not empty"

  - by AdamG

  I am trying to delete a directory stored on a Windows 2008 R2 server, mounted on a Mac as network home (10.8.5). The directory was created by Safari and stores temporary internet files. I need to be able to delete this folder on logout from a Mac bash script. The Terminal on Mac shows the directory as empty: 36W-FacRm-02:History lwickham$ cd /home/lwickham/Library/Caches/Metadata/Safari/History 36W-FacRm-02:History lwickham$ ls -al total 0 drwx------ 1 lwickham CGPS\Domain Users 264 Nov 8 09:24 . drwx------ 1 lwickham CGPS\Domain Users 264 Nov 8 09:28 .. However, on the Windows server it has a single 0kb file that doesn't start with a "." but yet is invisible to the Mac. E:\FacultyHome2\lwickham\Library\Caches\Metadata\Safari\History>dir Volume in drive E is FacultyUsers2 Volume Serial Number is 8C17-4EF3 Directory of E:\FacultyHome2\lwickham\Library\Caches\Metadata\Safari\History 11/08/2013 09:24 AM <DIR> . 11/08/2013 09:24 AM <DIR> .. 11/07/2013 04:28 PM 0 http?%2F%2Fwww.google.com%2Furl?sa=t&rct= j&q=&esrc=s&source=web&cd=6&ved=0CFsQFjAF&url=http%253A%252F%252Fwww.usbanklocat ions.com%252Fhsbc-bank-usa-96th-street-branch.html&ei=5vR7UtmXEPjfsATe0YCIBA&usg =AFQjCNF9ypKbpYbXRng00FY3W8Y6cF1Tiw&bvm=bv.56146854,d. 1 File(s) 0 bytes 2 Dir(s) 514,231,967,744 bytes free 9ypKbpYbXRng00FY3W8Y6cF1Tiw&bvm=bv.56146854,d.1 File(s) 0 bytes2 Dir(s) 514,231,967,744 bytes free All my attempts to delete the dir from the Mac have failed: 36W-FacRm-02:History lwickham$ rm -fr /home/lwickham/Library/Caches/Metadata/Safari/History/* 36W-FacRm-02:History lwickham$ rm -frd /home/lwickham/Library/Caches/ rm: /home/lwickham/Library/Caches//Metadata/Safari/History: Directory not empty rm: /home/lwickham/Library/Caches//Metadata/Safari: Directory not empty rm: /home/lwickham/Library/Caches//Metadata: Directory not empty rm: /home/lwickham/Library/Caches/: Directory not empty

  Read the article

• need to bring back win 7

  - by user290513

  I like making music and playing games and occasionally do some Photoshop. I had a windows 8 computer but my mouse pointer always got stuck, so to try out something new I installed Ubuntu. here is how I installed it: Went to advanced statup options clicked on "use a device" after plugging in my bootable USB with Ubuntu replaced my windows 8 and installed Ubuntu 14.04 LTS I hope I did it correctly though. So after a few months I could've really find out a good Audio Production (not LMMS, because I use Stagelight) software nor something that could be familiar to the UI of Photoshop. So I decided to bring back Windows, but because of the bad experience of 8 I thought about bringing back win 7 So I used an app named WinUSB to make my bootable USB drive after formatting it to NTFS in GParted But when I go to my grub menu, my USB doesn't show up and my PC being a UEFI device. I don't know how to get to the bios of my device. Can somebody tell how to install Windows 7 completely and deleting Ubuntu or at least give me a link to a tutorial. I have a netbook: it is an Acer Aspire One 725. I'm fine with using commands in terminal and another thing that my laptop doesn't have a CD drive or reader, I can't put a CD inside

  Read the article

• Troubles Installing Windows 7 via USB. Flat install?

  - by Brian

  Hi friends, I've been struggling with this for a while. Windows 7 64-bit Enterprise edition just will not install on my Shuttle K45 system via a USB key. It hangs out during the install while copying files or while creating the partitions. The system is pretty standard and low-tech: IDE hard drives, no CD, 2G RAM. I am not sure what of the problem. Other than the Shuttle, I have a Apple MacBook Pro. On the MPB, I am running OS X, and Mint Linux and Window XP over Parallels. I have an ISO of Win7 that works (I installed it as a Parallels VM to make sure). I have used UltraISO and MS Windows 7 USB/DVD Download Tool to write it to the 8G USB key. Both seem to copy all the files correctly (with UltraISO, I asked it to verify). It boots via USB and the install looks just fine. Until it hangs, most of the time with a copying error of 0x80070241. So now I am trying to figure out if there are other ways I can install Windows 7 on this Shuttle system that has no CD drive. I've heard about a flat installation, however those all seem to be doing something from within Windows. I do have access to a command prompt from the Windows 7 install. Does anyone know if/how I can prep the Shuttle hard drive with Windows 7 installation and have Windows 7 install from the hard disk. I do not have an external enclosure for the IDE HD and I do not have any other system I can hook up to the hard drives. I do have an external Maxtor OneTouch drive available.

  Read the article

• Determining physical location of data on a disc

  - by Synetech

  Does anybody know of a way to find out where, physically on a CD or DVD a given piece of data would be located? I am trying to watch a DVD at the moment, and am about half-way through, but it keeps dying at a specific spot in the film, presumably because of a scratch. I have a repair kit, but I don’t know where to focus my repair because there are several scuffs and scratches on the disc and I have no way of knowing which one is causing the issue. Obviously, cleaning all of them is inadvisable because not only does it waste the consumable materials in the kit, but not all of them are a problem, and by working them, some may become unreadable. Moreover, just because I am half-way through the movie does not mean that it would be half-way from the hub to the edge for several reasons: Discs have more data towards the outer edge than the inner edge (circles are more mathematically complicated than rectangles) The disc is not completely filled up (and even if it were, the movie itself would be be using it all, there are extras and such) Because in this particular case it is a commercial DVD, it is also dual-layer which further complicates manual determination As such, I am trying to find a program that can let me identify a file (or part thereof), cluster, etc. and show me a picture of where on the CD/DVD it would be located. That way, I can look at the disc and fix any scratches that correspond to that distance from the hub. For example, the image below might indicate where on a disc a couple of files or range of clusters would be located, so by looking for anomalies in those areas (rotating as necessary), the correct one can be identified. I’m sure it can be done since at least one form of copy protection (DPM) uses it and DVD-lab Pro includes a “DVD Topology” feature to do this.

  Read the article

• Can't do anything with Ext. HDD, ".Trashes" is probably the boogyman. (On a MAC!)

  - by Sander Schaeffer

  I bought a external Harddrive today, A Samsung. But I'm not able to do anything with it A few notes on that. I can't put anything on the harddrive. It keeps on 'preparing copying files' I can delete anything on the harddrive system files, except the folder ".Trashes". It gives error 'Unexpected error: -50' I've tried to empty my own trashcan, no changes. I've set the file permission on the .Trashes to read/write everyone, doesn;t change a thing Trying to format the whole drive with DiskUtility, but quits at start, because the drive cannot be deactivated I've tried a few terminal commands sudo -s -r rf /Volumes/Untitled\ 1/.Trashes - Directory not empty -r rf /Volumes/Untitled\ 1/.Trashes - no permissions Also cd /Volumes ls -al cd name_of_partition ls -al -rm -rf .Trashes Again: Permission error. Also: I can't change drive permissions via Disk Utility, via the button 'recover drive permissions', because it is 'blank' I really can't figure out how to delete .Trashes, format the drive or get the damn thing working. Any suggestions? p.s. If this is the wrong Stack Exchange site: Please redirect me!

  Read the article

• Questions about explorer.exe

  - by nmuntz

  Hi, I was given by my company a laptop with Windows XP Professional in Spanish. I would like to translate it to English, since I really DISLIKE to use localized versions of programs. I have read about Windows MUI packs, however you MUST have Windows XP Pro in English in order to translate it to other language, you can't translate it TO English from other language. Since reinstalling the OS using a Win XP CD in english is not an option (don't have the license nor the CD, and don't have domain privileges to rejoin my computer to the domain), I was wondering what are the essential files that contain localized strings of text. I was doing some research, and apparently explorer.exe has many of the Windows Error Messages and other strings. Will replacing my original explorer.exe with one from Windows XP in English be enough (and work) for having a "basic" english version of windows? Im mainly interested in having error messages, start menu, and the control panel in english. Also, does it HAVE to be the same version as the Service Pack im running? Besides explorer.exe are there any other essential files that i should try to get and replace? Do you see any "dangers" in replacing this files with english version ones? Thanks in advance for your help.

  Read the article

• Blue screen of Death on Install

  - by Toby Allen

  I have a machine with Windows Vista Installed. It has an Intel X25 SSD as the System Drive I want to reinstall (I plan to format and overwrite Vista) with XP. When I boot up using the Dell XP CD it loads the initial drivers then i get a Blue Screen. This is quite concerning. The installed OS works ok, but its giving problems so I want to remove it. Should I just format the SSD and try again? Will this make any difference? Can I do something to avoid hitting the Blue Screen? Its possible I had corrupt sectors on one of the other disks, will a new XP install use the System drive or drive 0? Can I force the install to use a specific drive when installing? Error: *** STOP: 0x0000007B (0xF78D2524,0x0000034,0x00000000,0x00000000) I never did find the answer, however I removed the SSD and tried to install on other disk - CRASH I disconnected the other disk and tried to install with only SSD plugged in - CRASH I removed 1 block of RAM - CRASH I used a windows 7 CD - NO CRASH

  Read the article

• How can I make a copy of a printer in Win7?

  - by hawbsl

  Has anyone been able to copy an existing printer in Win7? I know that we were able to do this in XP (not as a direct copy/paste, but by installing the printer twice) but in Win7 it doesn't seem to be possible. Googling the answer is hopeless because searching for "copy printer" or "duplicate printer" you get a bunch of posts about "printer copiers" or people complaining about duplicate printers getting created in the background (precisely what I'd like to be able to do) It'd be good to know how to do it in general, but if it depends on the printer type, then in our case we are trying to make a copy of an HP Laserjet. Tried installing from the CD - but the CD is too old for Win7 Tried installing via Add Printer and that seems to install the printer but it's marked with an error. Tried installing via the .exe installer from the HP site and that does result in a successful printer being installed, but it won't let you install the same printer twice (stalls on the "insert USB cable now" step - simply won't enable the greyed out "Next" button). The reason this is required is so that we can print to one to the feeder and to the tray separately.

  Read the article

< Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >