Search Results

Search found 5457 results on 219 pages for 'necessary'.

Page 141/219 | < Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >

• Recommended Win2k8 Server software to fix my RAID-0 issue

  - by Jason Kealey

  I'm running an Asus P6T V2 Deluxe. It has six SATA ports and supports onboard RAID. I am using two of those ports for a RAID0 array of 1.5TB Seagate drives using the onboard RAID controller. One of them is giving me SMART warnings and I want to preemptively replace it. I pulled out two other 1.5TB drives from another computer and am ready to use one or both, if necessary. I can't run any SMART diagnostic software from within Windows because it only sees the hardware RAID-0 array, not each individual drive. The first thing I tried was a slow sector-by-sector copy using a free tool called EASEUS Disk Copy. Used the bootdisk, copied (took like 16 hours), unplugged the defective drive and plugged the new one in its place. The motherboard didn't recognize the new drive as being part of the known setup, so it did not want to boot. The second thing I tried was using other software (I forget the name) to copy the partition from within Windows. The first software failed because I had a server operating system. I found another software (I forget the name) which supported a server OS and did a partition copy onto the new drive. This seemed to work and the OS started to boot, but blue screened and started a reboot cycle. I'm assuming the software I was using was no good as it was trying to copy the boot disk while it was in use. I am looking for recommendations on what software to use to fix my problem without doing a re-install. Everything is backed up but my computer works fine and I'd like to avoid re-installation when possible. However, my system would be back up now if I had just started over on a second RAID array. :)

  Read the article

• Web Hosting: Any web host that supports files more than 50,000 in number?

  - by Devner

  Hi all, For my PHP & mySQL based application, I am trying to buy website hosting from a host who does not have a limit on the number of files I carry in my hosting account. Almost all the websites have a common limit of 50,000 files (some websites call it 50,000 nodes). The rest(to the extent of my search) are not even close. I have gone through the various websites, Googled lot of information, have spoken with the customer service of the hosting companies and they said that they have a limit of 50,000 files and that's why they call it the LIMIT. Now I have my application, which is a kind of social networking website, where people can upload various files of varying file size. So say if 50,000 users were to join the website and upload 1 file each, the limit of 50,000 will be reached very easily and my 50,001 customer will start facing file upload problems (& so will my account). So I would like to know if there's any website hosting services that do NOT levy such restrictions. In summary, I need the following options: No maximum file limit (more than 50,000 files in account). No maximum file upload limit in server setting (10MB, 12MB, 15MB, 20MB, etc.). Ability to upload files of various types (zip, flv, jg, png, etc.). Ability to stream Audio and Video (live audio & video not necessary). Access to .htaccess Access to php.ini, my.cnf or my.ini (this would be a plus) Supports SSL. Provides dedicated hosting(& IP) as well. Monthly payments without contracts are a plus. If you know of any such website hosting services, please post a reply ( a link to the same will be appreciated ). Thank you.

  Read the article

• High availability virtual machines

  - by Jeremy

  I've been reading a lot about high availability virtualization, either via Hyper-V or VMWare. In that context, essentially high availabliity means that the VM is hosted by a closter of physical servers (nodes), so if one of the physical servers goes down, the VM can still be served by other physical servers. So far so good, the physical cluster and the VM itself are highly available. However if the service being provided, let's say SQL server, MSDTC, or any other service, are actually being provided by the VM image and the virtualized operating system. So I imagine that there is still a point of failure at the virtual layer that isn't accounted for. Something could happen within the virtual machine itself that the physican cluster can not account for, correct? In that instance the physican failover cluster (Hyper-V) or VMWare host, can not fail over, because the issue is not with one of the servers in the physical cluster - failing over a physical node would not do any good. Does this necessitate building a virtual failover cluster on top of the physical one, or is this not necessary? Alternatively, I suppose you could skip the phsyical clustering, and just cluster at the virtual layer (Child based failover clustering), because that should still survive a physical failure. See image below showing parent based (left), child based (right) and a combination (center). Is parent based as far as you need to go, or is child based more appropriate?

  Read the article

• virtual web folder served by PHP script

  - by Martin

  I am trying to configure my apache to be able to display (virtual) pages like: mywebpage.com/something1 mywebpage.com/something2 mywebpage.com/folder/something3 I would like these "somethingX" and "folder" folders to be only virtual, not physical directories. For a start it would be great to send all requests to mywebpage to one PHP script which will somehow receive the original path information (there is some SERVER array as far as I know) and call necessary PHP functions (so far I use addresses like mywebpage.com/index.php?page=blabla&otherparameters=values...). Is that possible? I am struggling with different combination, currently I am with following file in /etc/apache2/conf.d/something.conf (not working of course). What is the correct way to proceed? Thanks. <Location /myweb> SetHandler my-handler Action my-handler /srv/www/htdocs/myweb/product.php virtual </Location> My pages are in /srv/www/htdocs/myweb. I tried with Location, with Directory, with Action and SetHandler, with AddHandler... ;-) Some configurations were ignored, some caused "object not found" with nothing relevant in error log.

  Read the article

• cant remove index.php from url in codeigniter

  - by Ashiq

  iam new in codeigniter frame work,i want to remove index.php from url and tried many times bt its not working..... here is my .htaccess file RewriteEngine on RewriteBase /test/ RewriteCond $1 !^(index\.php|resources|robots\.txt) RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ test/index.php/$1 [L,QSA] iam also change $config['index_page'] = ''; bt when running this i got an error message... Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator at [email protected] to inform them of the time this error occurred, and the actions you performed just before this error. More information about this error may be available in the server error log. here is my appache error log [Sat Jan 05 16:59:53.265625 2013] [core:error] [pid 3976:tid 1152] [client ] Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace. pls help to solve this........ Thanks

  Read the article

• Computer won't start after installing new video card

  - by Vercas

  So, 1 year and 340 days ago I bought a desktop computer. Since then, it has served me well. But lately, I wanted an upgrade, so I bought a new video card. I documented myself about the compatibility, and it is okay. So I opened the case, cleaned up that... dust elemental living inside of it. Unscrewed the plastic thingie on the outside to unscrew the old video card. Because of the stupid arrangement of the ports, I had to unscrew the motherboard to unplug it. So I unscrewed it, removed the old card, put in the new one, moved the motherboard back, screwed it back in, screwed the video card on the holder... thingie, and screwed the plastic thingie back in. Everything went smoothly, nothing had to be forced in/out. I connected the external power supply, closed the computer case, put the tower back in it's place and all the cables back in. When I pressed the power button, the LED turned... some color I can't distinguish. It stayed that way for a second, and then it went off. I tried a bunch of things, including permuting the external power supply arrangement (1 connection, 2 connections and no connections), with no success. And here are some of the specifications: Motherboard manufacturer: Asrock Processor: AMD Athlon II X2 3.0 GHz RAM: 2 x 2GB (had only 1 initially, bought the second plate a bit later) OLD video card: AMD Radeon HD 5450 NEW video card: Gigabyte nVidia GeForce GTX 650 GPU, 1GB GDDR5 128bit PCI-E, Dual-link DVI-Dx2 / HDMI / D-Sub Power supply: 450W + all the requirements I managed to find on the internet are met (+12V 18A or something) More specific information is stored... On that computer. If required, I may open the case again and read the stickers to find more specific information. I can also provide photos if necessary. Any ideas? Suggestions? Something? :|

  Read the article

• Cisco Catalyst 3550 + Alteon 184 Load-Balancing Issues

  - by upkels

  I have just deployed a couple Cisco Catalyst 3550 switches, and a couple Alteon 184 Web Switches for load-balancing. I can ping all RIPs and VIPs to/from the Alteon. Topology Before: (server) <- (Alteon) <- (Internet) Topology Now: (server) <- (3550) <- Alteon <- (Internet) Cisco Port Configuration (Alteon Uplink Port): description LB_1_PORT_9_PRIMARY switchport access vlan 10 switchport mode access switchport nonegotiate speed 100 duplex full Alteon Port 9 Configuration (VLAN 10 WAN): >> Main# /c/port 9/cur Current Port 9 configuration: enabled pref fast, backup gig, PVID 10, BW Contract 1024 name UPLINK >> Main# /c/port 9/fast/cur Current Port 9 Fast link configuration: speed 100, mode full duplex, fctl none, auto off Cisco Configuration (Load-Balanced Servers Port): description LB_1_PORT_1_PRIMARY switchport access vlan 30 switchport mode access switchport nonegotiate speed 100 duplex full Alteon Port 1 Configuration (VLAN 30 LOAD-BALANCED LAN): >> Main# /c/port 1/cur Current Port 1 configuration: enabled pref fast, backup gig, PVID 30, BW Contract 1024 name LB_PORT_1 >> Main# /c/port 1/fast/cur Current Port 1 Fast link configuration: speed 100, mode full duplex, fctl both, auto on Each of my servers are on vlan 10 and 30, properly communicating. I have tried to turn on VLAN tagging on the Alteon, however it seems to cause all communications to stop working. When I tcpdump -i vlan30 on any of the webservers, I see normal ARP communications, and some STP communications, which may or may not be part of the problem: ... 15:00:51.035882 STP 802.1d, Config, Flags [none], bridge-id 801e.00:11:5c:62:fe:80.8041, length 42 15:00:51.493154 IP 10.1.1.254.33923 > 10.1.1.1.http: Flags [S], seq 707324510, win 8760, options [mss 1460], length 0 15:00:51.493336 IP 10.1.1.1.http > 10.1.1.254.33923: Flags [S.], seq 3981707623, ack 707324511, win 65535, options [mss 1460], len gth 0 15:00:51.493778 ARP, Request who-has 10.1.3.1 tell 10.1.3.254, length 46 etc... I'm not sure if I've provided enough information, so please let me know if any more is necessary. Thank you!

  Read the article

• .htaccess, mod_rewrite Issue

  - by Shoaibi

  What i want: Force www [works] Restrict access to .inc.php [works] Force redirection of abc.php to /abc/ Removal of extension from url Add a trailing slash if needed old .htaccess : Options +FollowSymLinks <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / ### Force www RewriteCond %{HTTP_HOST} ^example\.net$ RewriteRule ^(.*)$ http://www\.example\.net/$1 [L,R=301] ### Restrict access RewriteCond %{REQUEST_URI} ^/(.*)\.inc\.php$ [NC] RewriteRule .* - [F,L] #### Remove extension: RewriteRule ^(.*)/$ /$1.php [L,R=301] ######### Trailing slash: RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_URI} !(.*)/$ RewriteRule ^(.*)$ http://www.example.net/$1/ [R=301,L] </IfModule> New .htaccess: Options +FollowSymLinks <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / ### Force www RewriteCond %{HTTP_HOST} ^example\.net$ RewriteRule ^(.*)$ http://www\.example\.net/$1 [L,R=301] ### Restrict access RewriteCond %{REQUEST_URI} ^/(.*)\.inc\.php$ [NC] RewriteRule .* - [F,L] #### Remove extension: RewriteCond %{REQUEST_FILENAME} \.php$ RewriteCond %{REQUEST_FILENAME} -f RewriteRule (.*)\.php$ /$1/ [L,R=301] #### Map pseudo-directory to PHP file RewriteCond %{REQUEST_FILENAME}\.php -f RewriteRule (.*) /$1.php [L] ######### Trailing slash: RewriteCond %{REQUEST_FILENAME} -d RewriteCond %{REQUEST_FILENAME} !/$ RewriteRule (.*) $1/ [L,R=301] </IfModule> errorlog: Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace., referer: http://www.example.net/ Rewrite.log: http://pastebin.com/x5PKeJHB

  Read the article

• Allowing directory view/traversal for a specific VirtualHost in Apache 2.2

  - by warren

  I have the following vhost configured: <VirtualHost *:80> DocumentRoot /var/www/myvhost ServerName myv.host.com ServerAlias myv.host.com ErrorLog logs/myvhost-error_log CustomLog logs/myvhost-access_log combined ServerAdmin [email protected] <Directory /var/www/myvhost> AllowOverride All Options +Indexes </Directory> </VirtualHost> The configuration appears to be correct from the apachectl tool's perspective. However, I cannot get a directory listing on that vhost: Forbidden You don't have permission to access / on this server. Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. The error log shows the following: [Wed Mar 07 19:23:33 2012] [error] [client 66.6.145.214] Directory index forbidden by Options directive: /var/www/****** update2 More recently, the following is now kicking-into the error.log: [Wed Mar 07 20:16:10 2012] [error] [client 192.152.243.233] Options FollowSymLinks or SymLinksIfOwnerMatch is off which implies that RewriteRule directive is forbidden: /var/www/error/noindex.html update3 Today, the following is getting kicked-out: [Thu Mar 08 14:05:56 2012] [error] [client 66.6.145.214] Directory index forbidden by Options directive: /var/www/<mydir> [Thu Mar 08 14:05:56 2012] [error] [client 66.6.145.214] Options FollowSymLinks or SymLinksIfOwnerMatch is off which implies that RewriteRule directive is forbidden: /var/www/error/noindex.html [Thu Mar 08 14:05:57 2012] [error] [client 66.6.145.214] Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace. This is after modifying the vhosts.conf file thusly: <VirtualHost *:80> DocumentRoot /var/www/<mydir> ServerName myhost ServerAlias myhost ErrorLog logs/myhost-error_log CustomLog logs/myhost-access_log combined ServerAdmin admin@myhost <Directory "/var/www/<mydir>"> Options All +Indexes +FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> What is missing? update 4 All subdirectories of the root directory do directory listings properly - it is only the root which cannot.

  Read the article

• quickly close all word and excel

  - by dyenatha

  Suppose I open 10 Word files and 10 Excel files and make no changes, how do I quickly taskkill all at once? Because I must repeat several attempts to replicate race, I'm hoping for a command-line solution. I'm willing to try PowerShell and cygwin (1.5) if necessary. The OS is Windows XP SP3 with current patches (still IE7). I tried "taskkill /pid 1 /pid 2 /t" where 1 is PID of EXCEL.EXE and 2 is PID of WINWORD.EXE, but it closed only 1 window of each program. I'm trying to replicate a race where an add-in for Microsoft Office 2007 fails to exclusive-lock one of its own files, which caused the 2nd Office program to stop exiting with a warning: System.IO.IOException: The process cannot access the file 'C:\Documents and Settings\me\Application Data\ExpensiveProduct\Add-InForMicrosoftOffice\4.2\egcred' because it is being used by another process. at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy) at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options) at System.IO.StreamWriter.CreateFile(String path, Boolean append) at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize) at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding) at System.IO.File.WriteAllText(String path, String contents, Encoding encoding) at ExpensiveProduct.EG.DataAccess.Credentials.CredentialManager.SaveUserTable() at ExpensiveProduct.OfficeAddin.OfficeAddinBase.Dispose(Boolean disposing) at ExpensiveProduct.OfficeAddin.WordAddin.Dispose(Boolean disposing) at ExpensiveProduct.OfficeAddin.OfficeAddinBase.OnHostShutdown() at ExpensiveProduct.OfficeAddin.OfficeAddinBase.Unload(ext_DisconnectMode mode)

  Read the article

• samba access from win98

  - by SimonSalman

  Hello, the admin installed a new file server in our institute: OpenSuse 11.1 with Samba 3.2.7-11.3.2-2154-SUSE-CODE11. They copied the smb.conf from the old machine (hosting Samba 3.0.0) to the new one. Everything works as before, but one Windows 98 machine can see but not access the file server. It prompts for user authentication, but will not accept any user-password combination. There exists a lot of discussion about the problem on the net, but none provided a clear answer to the problem. EDIT: 1. I changed Win98 registry enable plain-text passwords, and alternatively changed server's smb.conf and /etc/smbpasswd to accept encrypted passwords 2. Further I provide a profile with a user-password combination on Win98 machine similar to one of the samba users-password combinations. 3. I changed smb.conf such that the samba server is the Local Master Browser all these changes are not necessary when using the older samba server. So, I conclude that a configuration problem on the server side is likely. If you need any further information, I will post them here. Best regards, Simon

  Read the article

• Network Security Device/Software

  - by Campo

  We currently run Symantec Antivirus Corporate 10.2. The software is really easy to manage on a network but the actual virus detection isn't bad but the malware detection is crap. We recently were infected with a email bot that got us put on some block lists. This has been resolved. I cannot have that happen again. I would like to find a program as easy to manage as symantec that I can install on all the user's workstations as well as the servers. We run a windows 2003 domain. We have a couple 2008 test servers in the environment. Most of the workstations are xp though I am using windows 7 and symantect is not compatible with this OS... So we need a solution that would cover all those operating systems. If it could be installed on macs too that would be a bonus though not necessary at all. This software must detect: Viruses AND Malware I am looking for something that combines the features in anti-malware programs like malwarebytes or spybot with an antivirus program like symantec or AVG. Alternatively if there is a piece of hardware that is a firewall, router, and packet inspection for virus/spam that would be the most ideal solution. I then could supplement with a piece of software that could pickup what the hardware misses. Thank you for your suggestions.

  Read the article

• Why does 3.5 mm audio out work through headphones but not through external speakers?

  - by Rickster

  I have a computer that has a 3.5 mm audio jack on the front of it. The computer itself has no speakers, so this is the only way to hear sound. If I plug headphones into it, the audio properly plays through the headphones, and if I plug in external speakers it used to play through them as well. Just today I turned on my computer and the audio no longer plays through the speakers, but if I plug in the headphones instead it works. The speakers aren't broken, as both the speakers and headphones work in my iPod and play music. I thought that 3.5 mm jacks could not send data back to the computer, and the computer had no way of differentiating between different devices plugged into the jack. If this is true, how is it that the computer plays audio through the headphones but not through speakers plugged into the same 3.5 mm jack, and both devices are functional? Or is my knowledge on 3.5 mm jacks incorrect? I don't believe drivers are important, as the same driver runs the 3.5 mm jack for all devices, but if necessary I can provide additional information. Any ideas would be appreciated. Thanks!

  Read the article

• Using Active Directory through a Firewall

  - by Adam Brand

  I had kind of a weird setup today where I wanted to enable Windows Firewall on a Windows 2003 R2 SP2 computer that would act as an Active Directory Domain Controller. I didn't see one resource on the Internet that listed what would be required to do this, so I thought I'd list them here and see if anyone has anything to add/sees something that isn't necessary. Ports to Open with "subnet" scope: 42 | TCP | WINS (if you use it) 53 | TCP | DNS 53 | UDP | DNS 88 | TCP | Kerberos 88 | UDP | Kerberos 123 | UDP | NTP 135 | TCP | RPC 135 | UDP | RPC 137 | UDP | NetBIOS 138 | UDP | NetBIOS 139 | TCP | NetBIOS 389 | TCP | LDAP 389 | UDP | LDAP 445 | TCP | SMB 445 | UDP | SMB 636 | TCP | LDAPS 3268 | TCP | GC LDAP 3269 | TCP | GC LDAP Ports to Open with "Any" Scope (for DHCP) 67 | UDP | DHCP 2535 | UDP | DHCP ALSO You need to restrict RPC to use fixed ports instead of everything 1024. For that, you need to add two registry keys: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NTDS\Parameters Registry value: TCP/IP Port Value type: REG_DWORD Value data: <-- pick a port like 1600 and put it here HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters Registry value: DCTcpipPort Value type: REG_DWORD Value data: <-- pick another port like 1650 and put it here ...don't forget to add entries in the firewall to allow those in (TCP, Subnet scope). After doing all that, I was able to add a client computer to the AD domain (behind Windows Firewall) and log in successfully.

  Read the article

• Computer keeps restarting [closed]

  - by Joris

  I have a strange problem with my desktop pc, when I start it, it just restarts immediately, it displays the bios/motherboard logo and then restarts. I can't access the bios to edit settings because it restarts to fast. Then I tried different things to fix it with mixed success. (I also tried to reset the bios without success) I noticed that a capacity from the graphics card was broken (it looked exploded) so I ordered a new graphics card & plugged it in the computer. It didn't change much, still the same problem. Then I unplugged everything that's not necessary and put only 1Gig RAM in the motherboard (usually it has 4 x 1Gig RAM) and the computer started, then I putted another gig of RAM and the computer still started. (starting=booting windows) When I putted in the 3th RAM it didn't boot anymore (again restarting all the time) so I removed this 3th gig of RAM and this is where it gets weird. I expected the computer to boot again because it is exactly the same configuration as before - which worked - but the computer didn't want to start. It just gave the same problem as before (restarting all the time.. ) Anyone an idea what might be wrong?

  Read the article

• Installing Visual Studio Express on Windows 8.1

  - by robrene

  I've been trying to install the latest version of Microsoft Visual Studio Express from their website to toy around with the IDE and C# development in general. I have a relatively fresh and completely vanilla installation of Windows 8.1 Professional x64 for this purpose. I come from a Linux background, where installing software (especially software distributed by the maintainer of the OS) is usually done with package managers. First, I tried to look for Visual Studio in the Windows 8 Store. There was one entry, but it did not have an installation button. Instead, it redirected me to their website. From all the products listed under the "Download" section on their website, I decided Visual Studio 2013 Express for Windows Desktop was the best for me. I selected it and clicked on "Install now". An installer program downloaded, and I'm assuming that the installer downloaded the necessary files as it was running. When it was done, it asked for a reboot, to which I obliged. However, I can't seem to find the IDE installed anywhere? It doesn't show up anywhere in the Start menu interface. I can't find any executables that look like they might be the IDE in its installation folder. Running the installer again and selecting "Repair" does download some files, but after its requested reboot, nothing has changed. The only thing that I can find is an advertisement link to "Try other Visual Studio 2013 Products" in my start menu. I suppose my question is what I have to do to run Visual Studio 2013 Express on Windows 8.1? Am I not looking in the right places? Am I doing the installation process wrong? Thanks in advance

  Read the article

• Change source address based on destination IP

  - by hgj

  We have several "router" machines that gather a lot of external IP addresses on the same host and redirect, NAT or proxy the traffic to the internal network. They also act as routers for the machines on the internal network. This works fine, however I am unable to make the routing table, so I can change the source address, based on the destination a machine from the internal network want to access. Let's say I have a router, that has public addresses P1 (5.5.5.1/24) and P2 (5.5.5.2/24). All traffic goes through P1, but if necessary, the host is reachable on P2 too. This looks like this and works fine: > ip addr ... 1: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether aa:bb:cc:dd:ee:11 brd ff:ff:ff:ff:ff:ff inet 5.5.5.1/24 brd 5.5.5.255 scope global eth1 inet 5.5.5.2/24 brd 5.5.5.255 scope global secondary eth1:p2 ... Now I want to use P2 as the source address, if I want to access the Google DNS service for example (8.8.8.8). So I add a row in the routing table like: > ip route add 8.8.8.8 via 5.5.5.254 dev eth1 src 5.5.5.2 > ip route ... default via 5.5.5.254 dev eth1 5.5.5.0/24 dev eth1 proto kernel scope link src 5.5.5.1 8.8.8.8 via 5.5.5.254 dev eth1 src 5.5.5.2 ... But this does not work. If I ping 8.8.8.8, the host still uses P1 as the source address, and does not use P2 at all for outgoing connections. Am I doing it right? I guess not...

  Read the article

• Video card not detected in POST on initial boot.

  - by Jeff M

  I have a minor problem with my desktop computer after cleaning it out for dust. When I first boot up the computer, the video card does not get detected so I can't see anything. In POST, I'm getting the "can't detect video card" beeps. The boot sequence continues normally, just without video. However, if I restart it (using the restart button) anytime after POST, it would boot up normally. I have no reason to think that the motherboard, video card or PSU got damaged in the process. It was working fine before, works fine after resetting. Took all the necessary precautions while cleaning. On the initial boot, I can hear the video card's fan power up but immediately power down and try again one more time only to fail. After the beep, resetting gets everything running and sounding normally. I've reseated the card a couple of times and reset the BIOS but doesn't seem to help. I'm hoping I won't have to take it out and remove and reinstall everything again. Does anyone recognize these symptoms to know exactly what the problem is? My guess is that the video card isn't getting enough juice initially to be running stable to be detected. I just don't know what I did (or didn't do) to get it to be in this state. It's not a high priority thing for me at the moment, just means I have to always reset it after initially turning it on but will eventually remove everything and reinstall if it comes to that. I don't think the specs are relevant here but just in case, here's the relevant stuff: Motherboard: Gigabyte P35-DS3P Video: EVGA GeForce 8600 GTS PSU: Antec True Power Trio 650W Built ~2 years ago, still running well

  Read the article

• Combat server downtime by duplicating server and re-routing when main server is down

  - by Wasim

  I have a CentOS server which at times either crashes or gets attacked with DDOS. At the moment I have an off site backup which is filled up with 1.7TB of data. I'm currently paying as much for the backup as I am for the server and I was looking for advice from experienced people as to what option is best to proceed from here. Would it be a viable solution to ditch the offsite backup, and instead purchase an additional server which is an exact duplication of the first server. So if the first server is down, users are re-routed to the second server without noticing the first server is even down. This would create an automatic backup of the first server (albeit not offsite) and relinquish the need for the expensive offsite backup. Is the above solution a true solution to pricey backup or is offsite backup absolutely necessary? How would I go about doing this (obviously it's pretty complex so just links to some reading material or the terminology of the procedure would be great)? Appreciate the help and advice.

  Read the article

• How do you link a time stamp to a cell using a userform button control? [migrated]

  - by Chad Cochrane

  Hello fellow VB Developers/Users/Hobbyists/What-Have-You! I have a user form that has two buttons: 1. Start 2. Stop When I press start, I would like it to record the current time with this format: (dd/mm/yy hh:nn:ss:) in a specific column. Then when I press the Stop Button I would like it to record the time again in the cell next to it. Then if I press start Again I would like it to record below the first cells current record. Basically I am building a timer to record data to see how long certain tasks take. I will post the excel file and provide more information were necessary. Thanks for any help provided. CURRENT CODE Public runTimer As Double Public startTime As Date Dim counter As Date Sub setStart() counter = 0 startTime = Now runTimer = Now + TimeSerial(0, 0, 1) Application.OnTime runTimer, "setStart", , True Set myTime = Sheet4.Range("F1") Set timeRng = Sheet4.Range("C8:C100") i = WorksheetFunction.CountA(timeRng) i = i + 1 Cells(i, "C") = myTime Sheet4.Cells(i, "C").NumberFormat = "yyyy/mm/dd HH:mm:ss" If i >= 2 Then Cells(i, "D8") = Cells(i, "C8") - Cells(i - 1, "C8") Sheet4.Cells(i, "C").NumberFormat = "yyyy/mm/dd HH:mm:ss" End If Application.EnableEvents = False End Sub Sub setStop() Application.OnTime runTimer, "setStop", , True Set myTime = Sheet4.Range("F1") Set timeRng = Sheet4.Range("D8:D100") i = WorksheetFunction.CountA(timeRng) i = i + 1 Application.EnableEvents = False Cells(i, "D") = myTime Sheet4.Cells(i, "D").NumberFormat = "yyyy/mm/dd HH:mm:ss" End Sub

  Read the article

• Nginx Multiple If Statements Cause Memory Usage to Jump

  - by Justin Kulesza

  We need to block a large number of requests by IP address with nginx. The requests are proxied by a CDN, and so we cannot block with the actual client IP address (it would be the IP address of the CDN, not the actual client). So, we have $http_x_forwarded_for which contains the IP which we need to block for a given request. Similarly, we cannot use IP tables, as blocking the IP address of the proxied client will have no effect. We need to use nginx to block the requested based on the value of $http_x_forwarded_for. Initially, we tried multiple, simple if statements: http://pastie.org/5110910 However, this caused our nginx memory usage to jump considerably. We went from somewhere around a 40MB resident size to over a 200MB resident size. If we changed things up, and created one large regex that matched the necessary IP addresses, memory usage was fairly normal: http://pastie.org/5110923 Keep in mind that we're trying to block many more than 3 or 4 IP addresses... more like 50 to 100, which may be included in several (20+) nginx server configuration blocks. Thoughts? Suggestions? I'm interested both in why memory usage would spike so greatly using multiple if blocks, and also if there are any better ways to achieve our goal.

  Read the article

• vSphere education - What are the downsides of configuring virtual machines with *too* much RAM?

  - by ewwhite

  VMware memory management seems to be a tricky balancing act. With cluster RAM, Resource Pools, VMware's management techniques (TPS, ballooning, host swapping), in-guest RAM utilization, swapping, reservations, shares and limits, there are a lot of variables. I'm in a situation where clients are using dedicated vSphere cluster resources. However, they are configuring the virtual machines as though they were on physical hardware. In turn, this means a standard VM build may have 4 vCPUs and 16GB or more of RAM. I come from the school of starting small (1 vCPU, minimal RAM), checking real-world use and adjusting up as necessary. Some examples from a "problem" cluster. Resource pool summary - Looks almost 4:1 overcommitted. Note the high amount of ballooned RAM. Resource allocation - The Worst Case Allocation column shows that these VMs would have access to less than 50% of their configured RAM under constrained conditions. The real-time memory utilization graph of the top VM in the listing above. 4 vCPU and 64GB RAM allocated. It averages under 9GB use. Summary of the same VM What are the downsides of overcommitting and overconfiguring resources (specifically RAM) in vSphere environments? Assuming that the VMs can run in less RAM, is it fair to say that there's overhead to configuring virtual machines with more RAM than they need? What is the counter-argument to: "if a VM has 16GB of RAM allocated, but only uses 4GB, what's the problem??"? E.g. do customers need to be educated? What specific metric should be used to meter RAM usage. Tracking the peaks of "Active" versus time?

  Read the article

• Debian grub2 update removed Windows boot option.

  - by Wrikken

  Since I updated grub to grub 2 I no longer get the option to boot to Windows (which is unfortunately sometimes necessary for proprietary MSIE browser plugins I need to use for work). Relevant /boot/grub/menu.lst portion: ### END DEBIAN AUTOMAGIC KERNELS LIST # This is a divider, added to separate the menu items below from the Debian # ones. title Other operating systems: root # This entry automatically added by the Debian installer for a non-linux OS # on /dev/hda1 title Windows NT/2000/XP root (hd0,0) savedefault makeactive chainloader +1 This however does not appear anymore. I do have some entries in /boot/grub/grub.cfg with entries like these: menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-amd64' --class debian --class gnu-linux --class gnu --class os { insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set e638c434-4884-412f-a141-2c194f881fae echo 'Loading Linux 2.6.32-5-amd64 ...' linux /boot/vmlinuz-2.6.32-5-amd64 root=UUID=e638c434-4884-412f-a141-2c194f881fae ro quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-5-amd64 } Do I have to alter that file? If so, what is the correct syntax for a Windows boot? If not, what could be the problem?

  Read the article

• Looking for a software / something to automate some simple audio processing

  - by Daniel Magliola

  I'm looking for a way to take a 1-hour podcast MP3 file and split it into several several 2-minute MP3s. Along the way, I'd like to also do a few things like Amplify the volume. The problem I'm solving is that I have a crappy MP3 player that won't let me seek forward or backward, nor will it remember where I left it when I turn it off, plus, I listen to these in a seriously high-noise situation. Thus, I need to be able to skip forward in large chunks (2-5 minutes) to the point where I left it. Is there any decent way to do this? Audacity doesn't seem to have command-line capabilities. I'm willing to write some code, for example, to call something over the command line and get how long the MP3 file is, to later know how many pieces i'll have, and then say "create an MP3 with 0:00 to 2:00", "create an MP3 with 2:00 to 4:00", etc. I'm also willing to pay for the right tools if necessary. I also don't care how slow this runs, as long as I can automate it :-) I'm doing this on Windows. Any pointers / ideas? Thanks!

  Read the article

• How to have LiveJournal delegate my OpenID to something else?

  - by T-Boy

  I understand that if I have full control over my domain, I can set it up so that I can delegate the task of authenticating to another OpenID service provider. The problem is, what I'd like to do is to get the LiveJournal server to pass the authentication to someone else, instead of having LJ doing it. Preferably what I'd like to do is get LiveJournal, when asked by a web site, say, "No, I don't do it anymore -- go to this address". The plan was that this address would then be in a domain I fully control, which then would pass it on to whichever service provider I choose. I don't even know if I've gotten my understanding of OpenID right, if all this shenanigans are necessary, if my question makes sense, or if it's even possible with a service provider like Livejournal. ETA: Doing a little more reading up, and examining the source for my LiveJournal user page, I note that this particular line in the file's <header> area: <link rel="openid.server" href="http://www.livejournal.com/openid/server.bml" /> I suspect that changing this will allow me to forward OpenID requests to whomever I wish, I think; so far so good. Now comes the hard part -- figuring out how to change all of that using LiveJournal's customization options, if that is at all possible (here's hoping I don't need to pay to get that functionality).

  Read the article

< Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >