Search Results

Search found 88394 results on 3536 pages for 'snow leopard server'.

Page 141/3536 | < Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >

  • Server 2008, 2 NICs, 2 fixed IPs - big delays using internet

    - by user46055
    Hi geniuses I have an all in one Windows 2008 server, configured with AD/DHCP/DNS/RRAS - all set up with wizards and no specific tweaking. The server has 2 network adapters : one of which ("MyWAN") is plugged into our office's internet connection, the other ("MyLAN") is plugged into a local switch, which is also where all our desktops are connected. So this one server is doing everything. When first set up, MyLAN had a fixed IP of 192.168.2.1 and served the desktops with DHCP scope 192.168.2.50-99. It also told them to use 192.168.2.1 as DNS and gateway. MyWAN was setup to take its IP etc from DHCP, being handled by the building's router and ADSL modem etc. All desktops were setup to use DHCP. This all worked perfectly fine, until I recently changed MyWAN to have a static IP (I wanted to access it from home, and needed to give it a static IP to port map in the building's router). Things still work, but there is now a long delay when accessing the internet. The actual speed is as before when downloading, but there is a pause of 3-6 secs when connecting to new hosts (for example if I browse to slashdot from either a desktop or the server itself, it'll hang on connecting to slashdot.org, hang again on connecting to *.fsdn, *.google-analytics.com and all the other hosts referenced from the main page). If I ping slashdot.org from the server, I get the following : Pinging slashdot.org [216.34.181.45] with 32 bytes of data: Reply from 192.168.2.1: Destination host unreachable. Reply from 216.34.181.45: bytes=32 time=99ms TTL=239 Reply from 216.34.181.45: bytes=32 time=100ms TTL=239 Reply from 216.34.181.45: bytes=32 time=101ms TTL=239 Pinging anywhere external always seems to hit 192.168.2.1 first, which doesn't seem right. Trying tracert from the server gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 MYSERVER01.intranet [192.168.2.1] reports: Destination host unreachable Trying tracert from a desktop gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 <1 ms * <1 ms MYSERVER [192.168.2.1] 2 * * * Request timed out. 3 6 ms 6 ms 6 ms dsl-gw1.ge.mer.uk.webtapestry.net [217.151.111.17] 4 38 ms 239 ms 251 ms gw-router.ge.mer.uk.webtapestry.net [217.151.111.13] ...and then all is fine after that. I think that DNS is working fine because the domain names are getting translated to correct IPs immediately. DHCP seems to be okay? So perhaps it's something up with my RRAS setup - although I can't see any option during the setup wizard which I would have filled in differently. I've also tried changing the binding order of the two network connections, to prioritise MyWAN, but that doesn't seem to have done anything. Any idea what's up? Many thanks - Rob

    Read the article

  • Trouble migrating Joomla from Linux to Windows server

    - by Matt
    I'm having some trouble migrating a Joomla website from a Linux server to a Windows server. The database came over fine, Besides that, all I've done is download all the files from the current site, and change configuration.php so the log and tmp directories show "./tmp/" and "./logs/" I keep having an error in the PHP log stating PHP Fatal error: Class 'JTable' not found I've downloaded the site multiple times now, and I'm convinced this is a configuration problem, and not a missing file problem. I've even tried installing a mod for backup on the linux box to try and migrate the site, but sadly the mod had problems installing. The new server is running IIS 7.5 on Windows Web Server. PHP 5.2.14 and MySQL

    Read the article

  • Recommend an SFTP solution for Windows (Server & Client) that integrates well with Dreamweaver

    - by aaandre
    Could you please recommend a secure FTP solution for updating files on a remote windows server from windows workstations? We would like to replace the FTP-based workflow with a secure FTP one. Windows Server 2003 on the remotely hosted webserver, WinXP on the workstations. We manage the files via Dreamweaver's built-in FTP. My understanding is Dreamweaver supports sFTP out of the box so I guess I am looking for a good sFTP server for Windows Server 2003. Ideally, that would not require cygwin. Ideally, the solution would use authentication based on the existing windows accounts and permissions. Thank you!

    Read the article

  • Recommended service account setup for MS SQL Server 2005/2008

    - by boxerbucks
    We have a number of MS SQL servers in our environment running either SQL Server 2005 standard/enterprise or SQL server 2008 enterprise. Currently the SQL services are running as local service or network service and the MS recommended best practice is to run as a domain account which is what we are trying to move towards. Is the best practice with regards to domain accounts to have a separate domain account per service per server? So if we have 4 SQL services we want to run per server and we have 50 servers, we would create 50 * 4 = 200 accounts in AD? This seems excessive to me and I was wondering if anyone has any real experience with this type of setup and it's management.

    Read the article

  • Internet<->Server<->Router<->Computers Setup

    - by DanSpd
    Hello once again, Another question related to network setup. Idea is to setup network as following: Internet<-Server 2k3<-DLink 655 Router<-computers, etc But the main point is to keep direct internet connection on server and provide internet access to all computers connected to router. Question is how to? Thank you P.S. Server has two Ethernet ports

    Read the article

  • books on web server technology

    - by tushar
    i need to understand the web server technologies as to how are the packets recieved how does it respond and understand httpd.conf files and also get to undertand what terms like proxy or reverse proxy actually mean. but i could not find any resources so please help me and suggest some ebook or web site and by server i dont mean a specific one (apache or nginx..) in short a book on understanding the basics about a web server i already asked this on stackoverflow and webmasters in a nutshell was the answer i got and they said its better if i ask it here so please help me out

    Read the article

  • SQL Server Management Studio - Error connecting to remote DB

    - by Julien Poulin
    All right, here is the deal: I'm connecting to a Windows 2003 Server using VPN. On this server, there is a remote SQL Server 2005 Express engine. I can connect to the database using Visual Studio 2008. What I can't do though, is connect to this same database with SQL Server 2005 Management Studio (Standard). I have checked the connection info a hundred times and still nothing. One thought: do VS ans SSMS use the same sql provider? Note: I'm running Windows 7 RC. I had absolutely no problem using the same config under Vista. This is the error I get when trying to connect with SSMS:

    Read the article

  • Cloning a NAS drive which hosts a SQL Server DB

    - by Adrian Hand
    We have a system in the field running a server application which is suffering with major performance issues. The system in question has 2 onboard 300gb sas drives in RAID 5 from which it boots Windows Server 2003, and a 6tb buffalo terastation NAS unit (also RAID 5) to which the server app does all of its reading and writing. I believe the terastation is the source of all our woes. Whilst under load, reads and writes tick by at something of the order of 1meg/sec, though the network in question is hardly utilised. The terastation contains various data, but crucially hosts a full instance worth of SQL Server .mdf and .ldf files (master etc - the whole shooting match) I wish to stop all the services on the server, then take everything on the terastation and essentially clone it to some alternative onboard storage, so as to eliminate the terastation from the equation as far as poor performance is concerned. ie the terastation is currently drive D: - I want to copy everything off and then have the duplicate assume the drive letter so that as far as the software is aware, nothing is different. This is tricky because of the mdf and ldf files - everything else will work with a straight up file copy. Can anyone suggest a means to achieve what I am describing? Many thanks!

    Read the article

  • Oracle 10g to SQL server 2008/ migration

    - by vs1984
    We have a reasonably heavy Oracle 10G database (~ 120 GB space occupied). The database consists of tables, packages, materialized views, procedures etc. We are planning to decommission Oracle and migrate to SQL server 2008. Can you provide your experience on this similar exercise? What is the best approach to undertake this exercise? Are there any tools available with Microsoft to implement this? Once SQL server is commissioned, is it possible to connect SQL server to Oracle server in downstream applications?

    Read the article

  • Delay index build until SQL Server table load is complete with SSIS

    - by Mattew
    I have a large table that I am updating. Is it possible to disable index updates on the destination table until the load is complete? It seems like a waste for it to be constantly updating the index with each commit. I can just drop and recreate the index before and after the load, I just want to know if there is a quick way to configure that in the OLEDB or SQL Server destination. Server is Windows Server 2003 Datacenter Edition, running SQL Server 2008 Standard Edition with SSIS.

    Read the article

  • Mail server Backup script

    - by Paul Stevens
    Hello, Im looking for the best way to accomplish a full backup of our "vmail" accounts on our mail server (CentOS "iRedMail" 5.1). I also need to split on 4GB parts the resulting tar or bzip compressed backup, and get this DVD-RW burned, on same server. The idea is to get this procedure to running overnight, once a week. Our mail server holds about 45GB of information. I will appreciate any advise or help on this topic. Thanks.

    Read the article

  • sql server log shipping

    - by voam
    I am setting up log shipping with two 2008 sql servers connecting with a vpn. As far as I know as long as the sql agent is able to access the share on the primary/secondary servers everything will work. When I set up the Log shipping on the primary server using SQL Mangagement Studio, before I can set any of the "Secondary Database Settings" it asks me to connect to the secondary server. But I really don't want to open up the connection to the secondary server. I will be initialing this secondary database with a backup so as long as the transaction logs get copies everything should work. How to I work around the GUI not enabling any of the settings for the secondary server until I actually connect to it? Thanks in advance!

    Read the article

  • Zend Server + Daemontools

    - by Ben
    Hey, Is anyone running Zend Server under Daemontools? I know I can use -D NO_DETACH to run apache under daemontools. But, I'm not sure if the other Zend Server components (monitor, lighthttpd, scd, jobqueue) have similar options. (The end goal is "run Zend Server with service supervision", so upstart would be fine too. For reference, my servers are running Ubuntu 10.04 LTS.) Ben

    Read the article

  • Vmware cpu allocation for a spiking database server

    - by user1552172
    I have a database server with many poorly written queries that causes the sql server to spike then drop constantly ( a massive start from scratch is happening). I need to know if the cpu allocation on the vm to expand as needed is best practice for a case like this. I am wondering if the esxi platform cant expand as fast as the spikes happen. I am curious what is best practice for vm cpu allocation on sql server (with horribly written queries)

    Read the article

  • IPv6 6to4 on Windows Server

    - by Graham Wager
    I'm looking for a relatively simple guide to setting up an IPv6 tunnel properly. This network currently has a server (Windows Server 2008R2) running RRAS that establishes connectivity to the internet using a demand-dial PPPoE connection and handles the NAT. It also hosts a DNS server and DHCP. My ISP does not support IPv6, but I have a static IPv4 address. I've read about 6to4 and signed up at tunnelbroker.net, but quickly felt out of my depth. How do I configure my network to use it, and how I should configure my DHCP server with regards to IPv6 addresses?

    Read the article

  • Forcing users to change password on first login - Windows Server 2008 R2 Remote Desktop Services

    - by George Durzi
    I'm setting up a demo lab environment in which each demo lab user is assigned 4 accounts to use in the lab. Users access the lab via Remote Desktop to the "client" machine in the lab - exposed at demolab.mydomain.com. The Client machine is a Windows 2008 Server R2 Enterprise Edition server The Remote Desktop Services role is configured on this server Remote Connection settings are configured to allow users to connect with any version of the Remote Desktop Client All accounts are members of the local Administrators and Remote Desktop Users groups All accounts are configured to be forced to change the default password after first login The user is instructed to remote into the lab with an account designated as their main account, and establish 3 more remote desktop sessions within the lab using their 3 other assigned demo lab accounts. When establishing the initial remote desktop connection to the lab using their main account, the user sees the change password dialog as expected. However, after logging in and trying to establish remote desktop connections to the server with their three other accounts, they are prompted that they need to change the password after logging in but can't continue with the login process - they don't see the expected change password experience. After logging in with a primary accounts, it doesn't make a difference if I try establishing a Remote Desktop connection to the environment using the name of the server, e.g. Client, or demolab.mydomain.com. I experimented with changing the settings for Remote Connections to require NLA but that didn't make a different. Appreciate any tips. Thanks

    Read the article

  • ASP.NET Session Management - which SQL Server option?

    - by frumious
    We're developing some custom web parts for our WSS 3 intranet, and have just run into something we'd like to use ASP.NET sessions for. This isn't currently enabled on the development server. We'd like to use SQL Server as the storage mechanism, because the production environment is a web farm with very simple load-balancing. There are 3 options you can choose from to set up the SQL Server session storage, tempdb, default separate DB, named DB. Both tempdb and default separate DB create a new DB to store certain information in; tempdb stores the actual session info in tempdb, which doesn't survive a reboot, and default separate DB stores everything in the new DB. Since you've got to create the new DB either way, my question is this: why would you ever choose to store the session info in tempdb? The only thing I can think of is if you'd like to have the ability to wipe the session by rebooting the server, but that seems quite apocalyptic!

    Read the article

  • Windows Server 2008 - inexplicable system time jumps/glitches/inaccuracies

    - by Nathan Ridley
    I'm running a production web server on Windows Server 2008. On this server I have a database which logs certain user actions, but every now and again I inexplicably get database entries which, according to the record ID and the records immediately before and after, have the wrong time logged against them (7 days+ too old). For example, record ID 1001 will be for Dec 7, 11pm, 1002 will be for Dec 7, 11:01pm, then 1003 will be for Nov 28, 1:38am, then the next will be back on track again. The problem seems to occur in random records (or 2-3 records in a row) and crops up once every few days. This is absolutely baffling because there is only one place in the application that assigns this date/time value and it's simply the system UTC date. I have been synchronizing the system time to time-a.nist.gov (which I read in another article was a bit more reliable than the default time.windows.com) and it seems to occasionally get out of time anyway (3-4 minutes), but I'm speculating that occasionally the time server has a temporary glitch where the date changes to a drastically wrong value for a short space of time, then changes back. Either that, or the motherboard clock battery is screwed and the reason the time momentarily changes is that the motherboard loses the time and then the time synchronization puts it back again. Could either of my suspicions be right? Should I turn off time synchronization for a production server? Assigning dates to an event log where the dates are up to 2 weeks prior to the actual date is a severe problem I can't have when the next version of my application is released. Any suggestions or advice would be appreciated.

    Read the article

  • Enabled Network Discovery on Server, and now VNC and Squeezebox clients don't work

    - by Mike Hanson
    I've recently setup a Windows Server 2008. It's running an email server, Squeezebox server, MS SQL Server, etc. I'm doing remote maintenance with UltraVNC. I had everything working fine. Then the server needed to access a network share on another machine, and I was prompted to turn on network discovery, which I did. I chose the Home rather than Public option. Since doing that, some things have stopped working, while others are still fine. Shared folders and the the Email services (ports 25 and 110) are still accessible. VNC (port 5900) and Squeezeboxes (port 9000) no longer work. Here's what I've tried to try to solve the problem: Checked the network discovery settings, to see if anything looked strange. Checked the firewall settings, and those ports appear to be open. Also in the firewall settings, the entries for Private domain Network Discovery were all on, but the Domain/Public ones were off. I tried turning those on. In the services, turned on Function Discovery Resource Publication and SSDP Discovery. Any other suggestions?

    Read the article

  • Directly printing to remote CUPS/IPP server on Snow Leopard

    - by Martin v. Löwis
    I need to use Kerberos authentication when printing from my OSX machine, however, the machine itself does not have a service account in active directory, so the KDC will not issue a delegation ticket for the local CUPS installation. I think printing could work if the printing framework would directly print to the network CUPS server (or even to the Windows print server), bypassing the local CUPS. Is it possible to setup printing so that it directly accesses the remote print server? (asking for a service ticket for that server would succeed)

    Read the article

  • windows server 2003 cannot accept connections

    - by Seb
    Hi everyone, I am running a Windows Server 2003 OS and am noticing that no one is able to connect to the machine through Remote Desktop. I have gone through the Terminal Services Configuration to make sure that we had the RDP-Tcp connection enabled and I've checked to see that the server was listening to port 3389. Are there any other options since I've tried to ping into our host server with no results. Thanks in advance.

    Read the article

  • Percona-server time out on /etc/init.d/mysql start

    - by geekmenot
    Every time I start mysql, using /etc/init.d/mysql start or service mysql start, it always times out. * Starting MySQL (Percona Server) database server mysqld [fail] However, I can get into mysql. Just wanted to know if there is a problem with the install because it happens all the time, not a one off error. mysql-error.log shows: 121214 11:25:56 mysqld_safe Starting mysqld daemon with databases from /data/mysql/ 121214 11:25:56 [Note] Plugin 'FEDERATED' is disabled. 121214 11:25:56 InnoDB: The InnoDB memory heap is disabled 121214 11:25:56 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121214 11:25:56 InnoDB: Compressed tables use zlib 1.2.3 121214 11:25:56 InnoDB: Using Linux native AIO 121214 11:25:56 InnoDB: Initializing buffer pool, size = 14.0G 121214 11:25:58 InnoDB: Completed initialization of buffer pool 121214 11:26:01 InnoDB: Waiting for the background threads to start 121214 11:26:02 Percona XtraDB (http://www.percona.com) 1.1.8-rel29.2 started; log sequence number 9333955393950 121214 11:26:02 [Note] Server hostname (bind-address): '0.0.0.0'; port: 3306 121214 11:26:02 [Note] - '0.0.0.0' resolves to '0.0.0.0'; 121214 11:26:02 [Note] Server socket created on IP: '0.0.0.0'. 121214 11:26:02 [Note] Slave SQL thread initialized, starting replication in log 'mysql-bin.005163' at position 624540946, relay log '/data/mysql/mysql-relay-bin.000043' position: 624541092 121214 11:26:02 [Note] Slave I/O thread: connected to master '[email protected]:3306',replication started in log 'mysql-bin.005180' at position 823447620 121214 11:26:02 [Note] Event Scheduler: Loaded 0 events 121214 11:26:02 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.5.28-29.2-log' socket: '/data/mysql/mysql.sock' port: 3306 Percona Server (GPL), Release 29.2

    Read the article

< Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >