Search Results

Search found 4139 results on 166 pages for 'creation kit'.

Page 142/166 | < Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >

• InnoDB Compression Improvements in MySQL 5.6

  - by Inaam Rana

  MySQL 5.6 comes with significant improvements for the compression support inside InnoDB. The enhancements that we'll talk about in this piece are also a good example of community contributions. The work on these was conceived, implemented and contributed by the engineers at Facebook. Before we plunge into the details let us familiarize ourselves with some of the key concepts surrounding InnoDB compression. In InnoDB compressed pages are fixed size. Supported sizes are 1, 2, 4, 8 and 16K. The compressed page size is specified at table creation time. InnoDB uses zlib for compression. InnoDB buffer pool will attempt to cache compressed pages like normal pages. However, whenever a page is actively used by a transaction, we'll always have the uncompressed version of the page as well i.e.: we can have a page in the buffer pool in compressed only form or in a state where we have both the compressed page and uncompressed version but we'll never have a page in uncompressed only form. On-disk we'll always only have the compressed page. When both compressed and uncompressed images are present in the buffer pool they are always kept in sync i.e.: changes are applied to both atomically. Recompression happens when changes are made to the compressed data. In order to minimize recompressions InnoDB maintains a modification log within a compressed page. This is the extra space available in the page after compression and it is used to log modifications to the compressed data thus avoiding recompressions. DELETE (and ROLLBACK of DELETE) and purge can be performed without recompressing the page. This is because the delete-mark bit and the system fields DB_TRX_ID and DB_ROLL_PTR are stored in uncompressed format on the compressed page. A record can be purged by shuffling entries in the compressed page directory. This can also be useful for updates of indexed columns, because UPDATE of a key is mapped to INSERT+DELETE+purge. A compression failure happens when we attempt to recompress a page and it does not fit in the fixed size. In such case, we first try to reorganize the page and attempt to recompress and if that fails as well then we split the page into two and recompress both pages. Now lets talk about the three major improvements that we made in MySQL 5.6.Logging of Compressed Page Images:InnoDB used to log entire compressed data on the page to the redo logs when recompression happens. This was an extra safety measure to guard against the rare case where an attempt is made to do recovery using a different zlib version from the one that was used before the crash. Because recovery is a page level operation in InnoDB we have to be sure that all recompress attempts must succeed without causing a btree page split. However, writing entire compressed data images to the redo log files not only makes the operation heavy duty but can also adversely affect flushing activity. This happens because redo space is used in a circular fashion and when we generate much more than normal redo we fill up the space much more quickly and in order to reuse the redo space we have to flush the corresponding dirty pages from the buffer pool.Starting with MySQL 5.6 a new global configuration parameter innodb_log_compressed_pages. The default value is true which is same as the current behavior. If you are sure that you are not going to attempt to recover from a crash using a different version of zlib then you should set this parameter to false. This is a dynamic parameter.Compression Level:You can now set the compression level that zlib should choose to compress the data. The global parameter is innodb_compression_level - the default value is 6 (the zlib default) and allowed values are 1 to 9. Again the parameter is dynamic i.e.: you can change it on the fly.Dynamic Padding to Reduce Compression Failures:Compression failures are expensive in terms of CPU. We go through the hoops of recompress, failure, reorganize, recompress, failure and finally page split. At the same time, how often we encounter compression failure depends largely on the compressibility of the data. In MySQL 5.6, courtesy of Facebook engineers, we have an adaptive algorithm based on per-index statistics that we gather about compression operations. The idea is that if a certain index/table is experiencing too many compression failures then we should try to pack the 16K uncompressed version of the page less densely i.e.: we let some space in the 16K page go unused in an attempt that the recompression won't end up in a failure. In other words, we dynamically keep adding 'pad' to the 16K page till we get compression failures within an agreeable range. It works the other way as well, that is we'll keep removing the pad if failure rate is fairly low. To tune the padding effort two configuration variables are exposed. innodb_compression_failure_threshold_pct: default 5, range 0 - 100,dynamic, implies the percentage of compress ops to fail before we start using to padding. Value 0 has a special meaning of disabling the padding. innodb_compression_pad_pct_max: default 50, range 0 - 75, dynamic, the  maximum percentage of uncompressed data page that can be reserved as pad.

  Read the article

• Developing a Cost Model for Cloud Applications

  - by BuckWoody

  Note - please pay attention to the date of this post. As much as I attempt to make the information below accurate, the nature of distributed computing means that components, units and pricing will change over time. The definitive costs for Microsoft Windows Azure and SQL Azure are located here, and are more accurate than anything you will see in this post: http://www.microsoft.com/windowsazure/offers/  When writing software that is run on a Platform-as-a-Service (PaaS) offering like Windows Azure / SQL Azure, one of the questions you must answer is how much the system will cost. I will not discuss the comparisons between on-premise costs (which are nigh impossible to calculate accurately) versus cloud costs, but instead focus on creating a general model for estimating costs for a given application. You should be aware that there are (at this writing) two billing mechanisms for Windows and SQL Azure: “Pay-as-you-go” or consumption, and “Subscription” or commitment. Conceptually, you can consider the former a pay-as-you-go cell phone plan, where you pay by the unit used (at a slightly higher rate) and the latter as a standard cell phone plan where you commit to a contract and thus pay lower rates. In this post I’ll stick with the pay-as-you-go mechanism for simplicity, which should be the maximum cost you would pay. From there you may be able to get a lower cost if you use the other mechanism. In any case, the model you create should hold. Developing a good cost model is essential. As a developer or architect, you’ll most certainly be asked how much something will cost, and you need to have a reliable way to estimate that. Businesses and Organizations have been used to paying for servers, software licenses, and other infrastructure as an up-front cost, and power, people to the systems and so on as an ongoing (and sometimes not factored) cost. When presented with a new paradigm like distributed computing, they may not understand the true cost/value proposition, and that’s where the architect and developer can guide the conversation to make a choice based on features of the application versus the true costs. The two big buckets of use-types for these applications are customer-based and steady-state. In the customer-based use type, each successful use of the program results in a sale or income for your organization. Perhaps you’ve written an application that provides the spot-price of foo, and your customer pays for the use of that application. In that case, once you’ve estimated your cost for a successful traversal of the application, you can build that into the price you charge the user. It’s a standard restaurant model, where the price of the meal is determined by the cost of making it, plus any profit you can make. In the second use-type, the application will be used by a more-or-less constant number of processes or users and no direct revenue is attached to the system. A typical example is a customer-tracking system used by the employees within your company. In this case, the cost model is often created “in reverse” - meaning that you pilot the application, monitor the use (and costs) and that cost is held steady. This is where the comparison with an on-premise system becomes necessary, even though it is more difficult to estimate those on-premise true costs. For instance, do you know exactly how much cost the air conditioning is because you have a team of system administrators? This may sound trivial, but that, along with the insurance for the building, the wiring, and every other part of the system is in fact a cost to the business. There are three primary methods that I’ve been successful with in estimating the cost. None are perfect, all are demand-driven. The general process is to lay out a matrix of: components units cost per unit and then multiply that times the usage of the system, based on which components you use in the program. That sounds a bit simplistic, but using those metrics in a calculation becomes more detailed. In all of the methods that follow, you need to know your application. The components for a PaaS include computing instances, storage, transactions, bandwidth and in the case of SQL Azure, database size. In most cases, architects start with the first model and progress through the other methods to gain accuracy. Simple Estimation The simplest way to calculate costs is to architect the application (even UML or on-paper, no coding involved) and then estimate which of the components you’ll use, and how much of each will be used. Microsoft provides two tools to do this - one is a simple slider-application located here: http://www.microsoft.com/windowsazure/pricing-calculator/  The other is a tool you download to create an “Return on Investment” (ROI) spreadsheet, which has the advantage of leading you through various questions to estimate what you plan to use, located here: https://roianalyst.alinean.com/msft/AutoLogin.do?d=176318219048082115  You can also just create a spreadsheet yourself with a structure like this: Program Element Azure Component Unit of Measure Cost Per Unit Estimated Use of Component Total Cost Per Component Cumulative Cost               Of course, the consideration with this model is that it is difficult to predict a system that is not running or hasn’t even been developed. Which brings us to the next model type. Measure and Project A more accurate model is to actually write the code for the application, using the Software Development Kit (SDK) which can run entirely disconnected from Azure. The code should be instrumented to estimate the use of the application components, logging to a local file on the development system. A series of unit and integration tests should be run, which will create load on the test system. You can use standard development concepts to track this usage, and even use Windows Performance Monitor counters. The best place to start with this method is to use the Windows Azure Diagnostics subsystem in your code, which you can read more about here: http://blogs.msdn.com/b/sumitm/archive/2009/11/18/introducing-windows-azure-diagnostics.aspx This set of API’s greatly simplifies tracking the application, and in fact you can use this information for more than just a cost model. After you have the tracking logs, you can plug the numbers into ay of the tools above, which should give a representative cost or in some cases a unit cost. The consideration with this model is that the SDK fabric is not a one-to-one comparison with performance on the actual Windows Azure fabric. Those differences are usually smaller, but they do need to be considered. Also, you may not be able to accurately predict the load on the system, which might lead to an architectural change, which changes the model. This leads us to the next, most accurate method for a cost model. Sample and Estimate Using standard statistical and other predictive math, once the application is deployed you will get a bill each month from Microsoft for your Azure usage. The bill is quite detailed, and you can export the data from it to do analysis, and using methods like regression and so on project out into the future what the costs will be. I normally advise that the architect also extrapolate a unit cost from those metrics as well. This is the information that should be reported back to the executives that pay the bills: the past cost, future projected costs, and unit cost “per click” or “per transaction”, as your case warrants. The challenge here is in the model itself - statistical methods are not foolproof, and the larger the sample (in this case I recommend the entire population, not a smaller sample) is key. References and Tools Articles: http://blogs.msdn.com/b/patrick_butler_monterde/archive/2010/02/10/windows-azure-billing-overview.aspx http://technet.microsoft.com/en-us/magazine/gg213848.aspx http://blog.codingoutloud.com/2011/06/05/azure-faq-how-much-will-it-cost-me-to-run-my-application-on-windows-azure/ http://blogs.msdn.com/b/johnalioto/archive/2010/08/25/10054193.aspx http://geekswithblogs.net/iupdateable/archive/2010/02/08/qampa-how-can-i-calculate-the-tco-and-roi-when.aspx   Other Tools: http://cloud-assessment.com/ http://communities.quest.com/community/cloud_tools

  Read the article

• Windows Azure – Write, Run or Use Software

  - by BuckWoody

  Windows Azure is a platform that has you covered, whether you need to write software, run software that is already written, or Install and use “canned” software whether you or someone else wrote it. Like any platform, it’s a set of tools you can use where it makes sense to solve a problem. The primary location for Windows Azure information is located at http://windowsazure.com. You can find everything there from the development kits for writing software to pricing, licensing and tutorials on all of that. I have a few links here for learning to use Windows Azure – although it’s best if you focus not on the tools, but what you want to solve. I’ve got it broken down here into various sections, so you can quickly locate things you want to know. I’ll include resources here from Microsoft and elsewhere – I use these same resources in the Architectural Design Sessions (ADS) I do with my clients worldwide. Write Software Also called “Platform as a Service” (PaaS), Windows Azure has lots of components you can use together or separately that allow you to write software in .NET or various Open Source languages to work completely online, or in partnership with code you have on-premises or both – even if you’re using other cloud providers. Keep in mind that all of the features you see here can be used together, or independently. For instance, you might only use a Web Site, or use Storage, but you can use both together. You can access all of these components through standard REST API calls, or using our Software Development Kit’s API’s, which are a lot easier. In any case, you simply use Visual Studio, Eclipse, Cloud9 IDE, or even a text editor to write your code from a Mac, PC or Linux.  Components you can use: Azure Web Sites: Windows Azure Web Sites allow you to quickly write an deploy websites, without setting a Virtual Machine, installing a web server or configuring complex settings. They work alone, with other Windows Azure Web Sites, or with other parts of Windows Azure. Web and Worker Roles: Windows Azure Web Roles give you a full stateless computing instance with Internet Information Services (IIS) installed and configured. Windows Azure Worker Roles give you a full stateless computing instance without Information Services (IIS) installed, often used in a "Services" mode. Scale-out is achieved either manually or programmatically under your control. Storage: Windows Azure Storage types include Blobs to store raw binary data, Tables to use key/value pair data (like NoSQL data structures), Queues that allow interaction between stateless roles, and a relational SQL Server database. Other Services: Windows Azure has many other services such as a security mechanism, a Cache (memcacheD compliant), a Service Bus, a Traffic Manager and more. Once again, these features can be used with a Windows Azure project, or alone based on your needs. Various Languages: Windows Azure supports the .NET stack of languages, as well as many Open-Source languages like Java, Python, PHP, Ruby, NodeJS, C++ and more.   Use Software Also called “Software as a Service” (SaaS) this often means consumer or business-level software like Hotmail or Office 365. In other words, you simply log on, use the software, and log off – there’s nothing to install, and little to even configure. For the Information Technology professional, however, It’s not quite the same. We want software that provides services, but in a platform. That means we want things like Hadoop or other software we don’t want to have to install and configure.  Components you can use: Kits: Various software “kits” or packages are supported with just a few clicks, such as Umbraco, Wordpress, and others. Windows Azure Media Services: Windows Azure Media Services is a suite of services that allows you to upload media for encoding, processing and even streaming – or even one or more of those functions. We can add DRM and even commercials to your media if you like. Windows Azure Media Services is used to stream large events all the way down to small training videos. High Performance Computing and “Big Data”: Windows Azure allows you to scale to huge workloads using a few clicks to deploy Hadoop Clusters or the High Performance Computing (HPC) nodes, accepting HPC Jobs, Pig and Hive Jobs, and even interfacing with Microsoft Excel. Windows Azure Marketplace: Windows Azure Marketplace offers data and programs you can quickly implement and use – some free, some for-fee.   Run Software Also known as “Infrastructure as a Service” (IaaS), this offering allows you to build or simply choose a Virtual Machine to run server-based software.  Components you can use: Persistent Virtual Machines: You can choose to install Windows Server, Windows Server with Active Directory, with SQL Server, or even SharePoint from a pre-configured gallery. You can configure your own server images with standard Hyper-V technology and load them yourselves – and even bring them back when you’re done. As a new offering, we also even allow you to select various distributions of Linux – a first for Microsoft. Windows Azure Connect: You can connect your on-premises networks to Windows Azure Instances. Storage: Windows Azure Storage can be used as a remote backup, a hybrid storage location and more using software or even hardware appliances.   Decision Matrix With all of these options, you can use Windows Azure to solve just about any computing problem. It’s often hard to know when to use something on-premises, in the cloud, and what kind of service to use. I’ve used a decision matrix in the last couple of years to take a particular problem and choose the proper technology to solve it. It’s all about options – there is no “silver bullet”, whether that’s Windows Azure or any other set of functions. I take the problem, decide which particular component I want to own and control – and choose the column that has that box darkened. For instance, if I have to control the wiring for a solution (a requirement in some military and government installations), that means the “Networking” component needs to be dark, and so I select the “On Premises” column for that particular solution. If I just need the solution provided and I want no control at all, I can look as “Software as a Service” solutions. Security, Pricing, and Other Info  Security: Security is one of the first questions you should ask in any distributed computing environment. We have certification info, coding guidelines and more, even a general “Request for Information” RFI Response already created for you.   Pricing: Are there licenses? How much does this cost? Is there a way to estimate the costs in this new environment? New Features: Many new features were added to Windows Azure - a good roundup of those changes can be found here. Support: Software Support on Virtual Machines, general support.    

  Read the article

• Use a Fake Http Channel to Unit Test with HttpClient

  - by Steve Michelotti

  Applications get data from lots of different sources. The most common is to get data from a database or a web service. Typically, we encapsulate calls to a database in a Repository object and we create some sort of IRepository interface as an abstraction to decouple between layers and enable easier unit testing by leveraging faking and mocking. This works great for database interaction. However, when consuming a RESTful web service, this is is not always the best approach. The WCF Web APIs that are available on CodePlex (current drop is Preview 3) provide a variety of features to make building HTTP REST services more robust. When you download the latest bits, you’ll also find a new HttpClient which has been updated for .NET 4.0 as compared to the one that shipped for 3.5 in the original REST Starter Kit. The HttpClient currently provides the best API for consuming REST services on the .NET platform and the WCF Web APIs provide a number of extension methods which extend HttpClient and make it even easier to use. Let’s say you have a client application that is consuming an HTTP service – this could be Silverlight, WPF, or any UI technology but for my example I’ll use an MVC application: 1: using System; 2: using System.Net.Http; 3: using System.Web.Mvc; 4: using FakeChannelExample.Models; 5: using Microsoft.Runtime.Serialization; 6:   7: namespace FakeChannelExample.Controllers 8: { 9: public class HomeController : Controller 10: { 11: private readonly HttpClient httpClient; 12:   13: public HomeController(HttpClient httpClient) 14: { 15: this.httpClient = httpClient; 16: } 17:   18: public ActionResult Index() 19: { 20: var response = httpClient.Get("Person(1)"); 21: var person = response.Content.ReadAsDataContract<Person>(); 22:   23: this.ViewBag.Message = person.FirstName + " " + person.LastName; 24: 25: return View(); 26: } 27: } 28: } On line #20 of the code above you can see I’m performing an HTTP GET request to a Person resource exposed by an HTTP service. On line #21, I use the ReadAsDataContract() extension method provided by the WCF Web APIs to serialize to a Person object. In this example, the HttpClient is being passed into the constructor by MVC’s dependency resolver – in this case, I’m using StructureMap as an IoC and my StructureMap initialization code looks like this: 1: using StructureMap; 2: using System.Net.Http; 3:   4: namespace FakeChannelExample 5: { 6: public static class IoC 7: { 8: public static IContainer Initialize() 9: { 10: ObjectFactory.Initialize(x => 11: { 12: x.For<HttpClient>().Use(() => new HttpClient("http://localhost:31614/")); 13: }); 14: return ObjectFactory.Container; 15: } 16: } 17: } My controller code currently depends on a concrete instance of the HttpClient. Now I *could* create some sort of interface and wrap the HttpClient in this interface and use that object inside my controller instead – however, there are a few why reasons that is not desirable: For one thing, the API provided by the HttpClient provides nice features for dealing with HTTP services. I don’t really *want* these to look like C# RPC method calls – when HTTP services have REST features, I may want to inspect HTTP response headers and hypermedia contained within the message so that I can make intelligent decisions as to what to do next in my workflow (although I don’t happen to be doing these things in my example above) – this type of workflow is common in hypermedia REST scenarios. If I just encapsulate HttpClient behind some IRepository interface and make it look like a C# RPC method call, it will become difficult to take advantage of these types of things. Second, it could get pretty mind-numbing to have to create interfaces all over the place just to wrap the HttpClient. Then you’re probably going to have to hard-code HTTP knowledge into your code to formulate requests rather than just “following the links” that the hypermedia in a message might provide. Third, at first glance it might appear that we need to create an interface to facilitate unit testing, but actually it’s unnecessary. Even though the code above is dependent on a concrete type, it’s actually very easy to fake the data in a unit test. The HttpClient provides a Channel property (of type HttpMessageChannel) which allows you to create a fake message channel which can be leveraged in unit testing. In this case, what I want is to be able to write a unit test that just returns fake data. I also want this to be as re-usable as possible for my unit testing. I want to be able to write a unit test that looks like this: 1: [TestClass] 2: public class HomeControllerTest 3: { 4: [TestMethod] 5: public void Index() 6: { 7: // Arrange 8: var httpClient = new HttpClient("http://foo.com"); 9: httpClient.Channel = new FakeHttpChannel<Person>(new Person { FirstName = "Joe", LastName = "Blow" }); 10:   11: HomeController controller = new HomeController(httpClient); 12:   13: // Act 14: ViewResult result = controller.Index() as ViewResult; 15:   16: // Assert 17: Assert.AreEqual("Joe Blow", result.ViewBag.Message); 18: } 19: } Notice on line #9, I’m setting the Channel property of the HttpClient to be a fake channel. I’m also specifying the fake object that I want to be in the response on my “fake” Http request. I don’t need to rely on any mocking frameworks to do this. All I need is my FakeHttpChannel. The code to do this is not complex: 1: using System; 2: using System.IO; 3: using System.Net.Http; 4: using System.Runtime.Serialization; 5: using System.Threading; 6: using FakeChannelExample.Models; 7:   8: namespace FakeChannelExample.Tests 9: { 10: public class FakeHttpChannel<T> : HttpClientChannel 11: { 12: private T responseObject; 13:   14: public FakeHttpChannel(T responseObject) 15: { 16: this.responseObject = responseObject; 17: } 18:   19: protected override HttpResponseMessage Send(HttpRequestMessage request, CancellationToken cancellationToken) 20: { 21: return new HttpResponseMessage() 22: { 23: RequestMessage = request, 24: Content = new StreamContent(this.GetContentStream()) 25: }; 26: } 27:   28: private Stream GetContentStream() 29: { 30: var serializer = new DataContractSerializer(typeof(T)); 31: Stream stream = new MemoryStream(); 32: serializer.WriteObject(stream, this.responseObject); 33: stream.Position = 0; 34: return stream; 35: } 36: } 37: } The HttpClientChannel provides a Send() method which you can override to return any HttpResponseMessage that you want. You can see I’m using the DataContractSerializer to serialize the object and write it to a stream. That’s all you need to do. In the example above, the only thing I’ve chosen to do is to provide a way to return different response objects. But there are many more features you could add to your own re-usable FakeHttpChannel. For example, you might want to provide the ability to add HTTP headers to the message. You might want to use a different serializer other than the DataContractSerializer. You might want to provide custom hypermedia in the response as well as just an object or set HTTP response codes. This list goes on. This is the just one example of the really cool features being added to the next version of WCF to enable various HTTP scenarios. The code sample for this post can be downloaded here.

  Read the article

• Design Pattern for Complex Data Modeling

  - by Aaron Hayman

  I'm developing a program that has a SQL database as a backing store. As a very broad description, the program itself allows a user to generate records in any number of user-defined tables and make connections between them. As for specs: Any record generated must be able to be connected to any other record in any other user table (excluding itself...the record, not the table). These "connections" are directional, and the list of connections a record has is user ordered. Moreover, a record must "know" of connections made from it to others as well as connections made to it from others. The connections are kind of the point of this program, so there is a strong possibility that the number of connections made is very high, especially if the user is using the software as intended. A record's field can also include aggregate information from it's connections (like obtaining average, sum, etc) that must be updated on change from another record it's connected to. To conserve memory, only relevant information must be loaded at any one time (can't load the entire database in memory at load and go from there). I cannot assume the backing store is local. Right now it is, but eventually this program will include syncing to a remote db. Neither the user tables, connections or records are known at design time as they are user generated. I've spent a lot of time trying to figure out how to design the backing store and the object model to best fit these specs. In my first design attempt on this, I had one object managing all a table's records and connections. I attempted this first because it kept the memory footprint smaller (records and connections were simple dicts), but maintaining aggregate and link information between tables became....onerous (ie...a huge spaghettified mess). Tracing dependencies using this method almost became impossible. Instead, I've settled on a distributed graph model where each record and connection is 'aware' of what's around it by managing it own data and connections to other records. Doing this increases my memory footprint but also let me create a faulting system so connections/records aren't loaded into memory until they're needed. It's also much easier to code: trace dependencies, eliminate cycling recursive updates, etc. My biggest problem is storing/loading the connections. I'm not happy with any of my current solutions/ideas so I wanted to ask and see if anybody else has any ideas of how this should be structured. Connections are fairly simple. They contain: fromRecordID, fromTableID, fromRecordOrder, toRecordID, toTableID, toRecordOrder. Here's what I've come up with so far: Store all the connections in one big table. If I do this, either I load all connections at once (one big db call) or make a call every time a user table is loaded. The big issue here: the size of the connections table has the potential to be huge, and I'm afraid it would slow things down. Store in separate tables all the outgoing connections for each user table. This is probably the worst idea I've had. Now my connections are 'spread out' over multiple tables (one for each user table), which means I have to make a separate DB called to each table (or make a huge join) just to find all the incoming connections for a particular user table. I've avoided making "one big ass table", but I'm not sure the cost is worth it. Store in separate tables all outgoing AND incoming connections for each user table (using a flag to distinguish between incoming vs outgoing). This is the idea I'm leaning towards, but it will essentially double the total DB storage for all the connections (as each connection will be stored in two tables). It also means I have to make sure connection information is kept in sync in both places. This is obviously not ideal but it does mean that when I load a user table, I only need to load one 'connection' table and have all the information I need. This also presents a separate problem, that of connection object creation. Since each user table has a list of all connections, there are two opportunities for a connection object to be made. However, connections objects (designed to facilitate communication between records) should only be created once. This means I'll have to devise a common caching/factory object to make sure only one connection object is made per connection. Does anybody have any ideas of a better way to do this? Once I've committed to a particular design pattern I'm pretty much stuck with it, so I want to make sure I've come up with the best one possible.

  Read the article

• To Bit or Not To Bit

  - by Johnm

  'Twas a long day of troubleshooting and firefighting and now, with most of the office vacant, you face a blank scripting window to create a new table in his database. Many questions circle your mind like dirty water gurgling down the bathtub drain: "How normalized should this table be?", "Should I use an identity column?", "NVarchar or Varchar?", "Should this column be NULLABLE?", "I wonder what apple blue cheese bacon cheesecake tastes like?" Well, there are times when the mind goes it's own direction. A Bit About Bit At some point during your table creation efforts you will encounter the decision of whether to use the bit data type for a column. The bit data type is an integer data type that recognizes only the values of 1, 0 and NULL as valid. This data type is often utilized to store yes/no or true/false values. An example of its use would be a column called [IsGasoline] which would be intended to contain the value of 1 if the row's subject (a car) had a gasoline engine and a 0 if the subject did not have a gasoline engine. The bit data type can even be found in some of the system tables of SQL Server. For example, the sysssispackages table in the msdb database which contains SQL Server Integration Services Package information for the packages stored in SQL Server. This table contains a column called [IsEncrypted]. A value of 1 indicates that the package has been encrypted while the value of 0 indicates that it is not. I have learned that the most effective way to disperse the crowd that surrounds the office coffee machine is to engage into SQL Server debates. The bit data type has been one of the most reoccurring, as well as the most enjoyable, of these topics. It contains a practical side and a philosophical side. Practical Consideration This data type certainly has its place and is a valuable option for database design; but it is often used in situations where the answer is really not a pure true/false response. In addition, true/false values are not very informative or scalable. Let's use the previously noted [IsGasoline] column for illustration. While on the surface it appears to be a rather simple question when evaluating a car: "Does the car have a gasoline engine?" If the person entering data is entering a row for a Jeep Liberty, the response would be a 1 since it has a gasoline engine. If the person is entering data is entering a row for a Chevrolet Volt, the response would be a 0 since it is an electric engine. What happens when a person is entering a row for the gasoline/electric hybrid Toyota Prius? Would one person's conclusion be consistent with another person's conclusion? The argument could be made that the current intent for the database is to be used only for pure gasoline and pure electric engines; but this is where the scalability issue comes into play. With the use of a bit data type a database modification and data conversion would be required if the business decided to take on hybrid engines. Whereas, alternatively, if the int data type were used as a foreign key to a reference table containing the engine type options, the change to include the hybrid option would only require an entry into the reference table. Philosophical Consideration Since the bit data type is often used for true/false or yes/no data (also called Boolean) it presents a philosophical conundrum of what to do about the allowance of the NULL value. The inclusion of NULL in a true/false or yes/no response simply violates the logical principle of bivalence which states that "every proposition is either true or false". If NULL is not true, then it must be false. The mathematical laws of Boolean logic support this concept by stating that the only valid values of this scenario are 1 and 0. There is another way to look at this conundrum: NULL is also considered to be the absence of a response. In other words, it is the equivalent to "undecided". Anyone who watches the news can tell you that polls always include an "undecided" option. This could be considered a valid option in the world of yes/no/dunno. Through out all of these considerations I have discovered one absolute certainty: When you have found a person, or group of persons, who are willing to entertain a philosophical debate of the bit data type, you have found some true friends.

  Read the article

• Oracle RightNow CX for Good Customer Experiences

  - by Andreea Vaduva

  Oracle RightNow CX is all about the customer experience, it’s about understanding what drives a good interaction and it’s about delivering a solution which works for our customers and by extension, their customers. One of the early guiding principles of Oracle RightNow was an 8-point strategy to providing good customer experiences. Establish a knowledge foundation Empowering the customer Empower employees Offer multi-channel choice Listen to the customer Design seamless experiences Engage proactively Measure and improve continuously The application suite provides all of the tools necessary to deliver a rewarding, repeatable and measurable relationship between business and customer. The Knowledge Authoring tool provides gap analysis, WYSIWIG editing (and includes HTML rich content for non-developers), multi-level categorisation, permission based publishing and Web self-service publishing. Oracle RightNow Customer Portal, is a complete web application framework that enables businesses to control their own end-user page branding experience, which in turn will allow customers to self-serve. The Contact Centre Experience Designer builds a combination of workspaces, agent scripting and guided assistances into a Desktop Workflow. These present an agent with the tools they need, at the time they need them, providing even the newest and least experienced advisors with consistently accurate and efficient information, whilst guiding them through the complexities of internal business processes. Oracle RightNow provides access points for customers to feedback about specific knowledge articles or about the support site in general. The system will generate ‘incidents’ based on the scoring of the comments submitted. This makes it easy to view and respond to customer feedback. It is vital, more now than ever, not to under-estimate the power of the social web – Facebook, Twitter, YouTube – they have the ability to cause untold amounts of damage to businesses with a single post – witness musician Dave Carroll and his protest song on YouTube, posted in response to poor customer services from an American airline. The first day saw 150,000 views and is currently at 12,011,375. The Times reported that within 4 days of the post, the airline’s stock price fell by 10 percent, which represented a cost to shareholders of $180 million dollars. It is a universally acknowledged fact, that when customers are unhappy, they will not come back, and, generally speaking, it only takes one bad experience to lose a customer. The idea that customer loyalty can be regained by using social media channels was the subject of a 2011 Survey commissioned by RightNow and conducted by Harris Interactive. The survey discovered that 68% of customers who posted a negative review about a holiday on a social networking site received a response from the business. It further found that 33% subsequently posted a positive review and 34% removed the original negative review. Cloud Monitor provides the perfect mechanism for seeing what is being said about a business on public Facebook pages, Twitter or YouTube posts; it allows agents to respond proactively – either by creating an Oracle RightNow incident or by using the same channel as the original post. This leaves step 8 – Measuring and Improving: How does a business know whether it’s doing the right thing? How does it know if its customers are happy? How does it know if its staff are being productive? How does it know if its staff are being effective? Cue Oracle RightNow Analytics – fully integrated across the entire platform – Service, Marketing and Sales – there are in excess of 800 standard reports. If this were not enough, a large proportion of the database has been made available via the administration console, allowing users without any prior database experience to write their own reports, format them and schedule them for e-mail delivery to a distribution list. It handles the complexities of table joins, and allows for the manipulation of data with ease. Oracle RightNow believes strongly in the customer owning their solution, and to provide the best foundation for success, Oracle University can give you the RightNow knowledge and skills you need. This is a selection of the courses offered: RightNow Customer Service Administration Rel 12.02 (3 days) Available as In Class and Live Virtual Class (Release 11.11 is available as In Class, Live Virtual Class and Training On Demand) This course familiarises users with the tasks and concepts needed to configure and maintain their system. RightNow Customer Portal Designer and Contact Center Experience Designer Administration Rel 12.02 (2 days) Available as In Class and Live Virtual Class (Release 11.11 is available as In Class, Live Virtual Class and Training On Demand) This course introduces basic CP structure and how to make changes to the look, feel and behaviour of their self-service pages RightNow Analytics Rel 12.02 (2 days) Available as In Class, Live Virtual Class and Training On Demand (Release 11.11 is available as In Class and Live Virtual Class) This course equips users with the skills necessary to understand data supplied by standard reports and to create custom reports RightNow Integration and Customization For Developers Rel 12.02 (5-days) Available as In Class and Live Virtual Class (Release 11.11 is available as In Class, Live Virtual Class and Training On Demand) This course is for experienced web developers and offers an introduction to Add-In development using the Desktop Add-In Framework and introduces the core knowledge that developers need to begin integrating Oracle RightNow CX with other systems A full list of courses offered can be found on the Oracle University website. For more information and course dates please get in contact with your local Oracle University team. On top of the Service components, the suite also provides marketing tools, complex survey creation and tracking and sales functionality. I’m a fan of the application, and I think I’ve made that clear: It’s completely geared up to providing customers with support at point of need. It can be configured to meet even the most stringent of business requirements. Oracle RightNow is passionate about, and committed to, providing the best customer experience possible. Oracle RightNow CX is the application that makes it possible. About the Author: Sarah Anderson worked for RightNow for 4 years in both in both a consulting and training delivery capacity. She is now a Senior Instructor with Oracle University, delivering the following Oracle RightNow courses: RightNow Customer Service Administration RightNow Analytics RightNow Customer Portal Designer and Contact Center Experience Designer Administration RightNow Marketing and Feedback

  Read the article

• GameplayScreen does not contain a definition for GraphicsDevice

  - by Dave Voyles

  Long story short: I'm trying to intergrate my game with Microsoft's Game State Management. In doing so I've run into some errors, and the latest one is in the title. I'm not able to display my HUD for the reasons listed above. Previously, I had much of my code in my Game.cs class, but the GSM has a bit of it in Game1, and most of what you have drawn for the main screen in your GameplayScreen class, and that is what is causing confusion on my part. I've created an instance of the GameplayScreen class to be used in the HUD class (as you can see below). Before integrating with the GSM however, I created an instance of my Game class, and all worked fine. It seems that I need to define my graphics device somewhere, but I am not sure of where exactly. I've left some code below to help you understand. public class GameStateManagementGame : Microsoft.Xna.Framework.Game { #region Fields GraphicsDeviceManager graphics; ScreenManager screenManager; // Creates a new intance, which is used in the HUD class public static Game Instance; // By preloading any assets used by UI rendering, we avoid framerate glitches // when they suddenly need to be loaded in the middle of a menu transition. static readonly string[] preloadAssets = { "gradient", }; #endregion #region Initialization /// <summary> /// The main game constructor. /// </summary> public GameStateManagementGame() { Content.RootDirectory = "Content"; graphics = new GraphicsDeviceManager(this); graphics.PreferredBackBufferWidth = 1280; graphics.PreferredBackBufferHeight = 720; graphics.IsFullScreen = false; graphics.ApplyChanges(); // Create the screen manager component. screenManager = new ScreenManager(this); Components.Add(screenManager); // Activate the first screens. screenManager.AddScreen(new BackgroundScreen(), null); //screenManager.AddScreen(new MainMenuScreen(), null); screenManager.AddScreen(new PressStartScreen(), null); } namespace Pong { public class HUD { public void Update(GameTime gameTime) { // Used in the Draw method titleSafeRectangle = new Rectangle (GameplayScreen.Instance.GraphicsDevice.Viewport.TitleSafeArea.X, GameplayScreen.Instance.GraphicsDevice.Viewport.TitleSafeArea.Y, GameplayScreen.Instance.GraphicsDevice.Viewport.TitleSafeArea.Width, GameplayScreen.Instance.GraphicsDevice.Viewport.TitleSafeArea.Height); } } } class GameplayScreen : GameScreen { #region Fields ContentManager content; public static GameStates gamestate; private GraphicsDeviceManager graphics; public int screenWidth; public int screenHeight; private Texture2D backgroundTexture; private SpriteBatch spriteBatch; private Menu menu; private SpriteFont arial; private HUD hud; Animation player; // Creates a new intance, which is used in the HUD class public static GameplayScreen Instance; public GameplayScreen() { TransitionOnTime = TimeSpan.FromSeconds(1.5); TransitionOffTime = TimeSpan.FromSeconds(0.5); } protected void Initialize() { lastScored = false; menu = new Menu(); resetTimer = 0; resetTimerInUse = true; ball = new Ball(content, new Vector2(screenWidth, screenHeight)); SetUpMulti(); input = new Input(); hud = new HUD(); // Places the powerup animation inside of the surrounding box // Needs to be cleaned up, instead of using hard pixel values player = new Animation(content.Load<Texture2D>(@"gfx/powerupSpriteSheet"), new Vector2(103, 44), 64, 64, 4, 5); // Used by for the Powerups random = new Random(); vec = new Vector2(100, 50); vec2 = new Vector2(100, 100); promptVec = new Vector2(50, 25); timer = 10000.0f; // Starting value for the cooldown for the powerup timer timerVector = new Vector2(10, 10); //JEP - one time creation of powerup objects playerOnePowerup = new Powerup(); playerOnePowerup.Activated += PowerupActivated; playerOnePowerup.Deactivated += PowerupDeactivated; playerTwoPowerup = new Powerup(); playerTwoPowerup.Activated += PowerupActivated; playerTwoPowerup.Deactivated += PowerupDeactivated; //JEP - moved from events since these only need set once activatedVec = new Vector2(100, 125); deactivatedVec = new Vector2(100, 150); powerupReady = false; }

  Read the article

• Big Data – Buzz Words: What is HDFS – Day 8 of 21

  - by Pinal Dave

  In yesterday’s blog post we learned what is MapReduce. In this article we will take a quick look at one of the four most important buzz words which goes around Big Data – HDFS. What is HDFS ? HDFS stands for Hadoop Distributed File System and it is a primary storage system used by Hadoop. It provides high performance access to data across Hadoop clusters. It is usually deployed on low-cost commodity hardware. In commodity hardware deployment server failures are very common. Due to the same reason HDFS is built to have high fault tolerance. The data transfer rate between compute nodes in HDFS is very high, which leads to reduced risk of failure. HDFS creates smaller pieces of the big data and distributes it on different nodes. It also copies each smaller piece to multiple times on different nodes. Hence when any node with the data crashes the system is automatically able to use the data from a different node and continue the process. This is the key feature of the HDFS system. Architecture of HDFS The architecture of the HDFS is master/slave architecture. An HDFS cluster always consists of single NameNode. This single NameNode is a master server and it manages the file system as well regulates access to various files. In additional to NameNode there are multiple DataNodes. There is always one DataNode for each data server. In HDFS a big file is split into one or more blocks and those blocks are stored in a set of DataNodes. The primary task of the NameNode is to open, close or rename files and directory and regulate access to the file system, whereas the primary task of the DataNode is read and write to the file systems. DataNode is also responsible for the creation, deletion or replication of the data based on the instruction from NameNode. In reality, NameNode and DataNode are software designed to run on commodity machine build in Java language. Visual Representation of HDFS Architecture Let us understand how HDFS works with the help of the diagram. Client APP or HDFS Client connects to NameSpace as well as DataNode. Client App access to the DataNode is regulated by NameSpace Node. NameSpace Node allows Client App to connect to the DataNode based by allowing the connection to the DataNode directly. A big data file is divided into multiple data blocks (let us assume that those data chunks are A,B,C and D. Client App will later on write data blocks directly to the DataNode. Client App does not have to directly write to all the node. It just has to write to any one of the node and NameNode will decide on which other DataNode it will have to replicate the data. In our example Client App directly writes to DataNode 1 and detained 3. However, data chunks are automatically replicated to other nodes. All the information like in which DataNode which data block is placed is written back to NameNode. High Availability During Disaster Now as multiple DataNode have same data blocks in the case of any DataNode which faces the disaster, the entire process will continue as other DataNode will assume the role to serve the specific data block which was on the failed node. This system provides very high tolerance to disaster and provides high availability. If you notice there is only single NameNode in our architecture. If that node fails our entire Hadoop Application will stop performing as it is a single node where we store all the metadata. As this node is very critical, it is usually replicated on another clustered as well as on another data rack. Though, that replicated node is not operational in architecture, it has all the necessary data to perform the task of the NameNode in the case of the NameNode fails. The entire Hadoop architecture is built to function smoothly even there are node failures or hardware malfunction. It is built on the simple concept that data is so big it is impossible to have come up with a single piece of the hardware which can manage it properly. We need lots of commodity (cheap) hardware to manage our big data and hardware failure is part of the commodity servers. To reduce the impact of hardware failure Hadoop architecture is built to overcome the limitation of the non-functioning hardware. Tomorrow In tomorrow’s blog post we will discuss the importance of the relational database in Big Data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• Disaster Recovery Discovery

  - by Rodney Landrum

  Last weekend I joined several of my IT staff on a mission to perform a DR test in our remote CoLo center in a large South East city of the US. Can I be more obtuse? The goal was simple for me as the sole DBA in a throng of Windows, Storage, Network and SAN admins – restore the databases and make them work. There were 4 applications that back ended to 7 SQL Server databases on 4 different SQL Server instances. We would maintain the original server names, but beyond that it was fair game. We had time to prepare so I was able to script out or otherwise automate the recovery process. I used sp_help_revlogin for three of the servers, a bit of a cheat actually because restoring the Master database on the target DR servers was the specified course of action according to the DR procedures ( the caveat “IF REQUIRED” left it open to interpretation. I really wanted to avoid the step of restoring Master for a number of reasons but mainly because I did not want to deal with issues starting SQL Services afterward. Having to account for the location of TempDB and the version conflicts of the resource DBs were just two of the battles I chose not to fight. Not to mention other system database location problems that might arise and prevent SQL from starting.  I was going to have to restore all of the user databases anyway, so I would not really gain any benefit, outside of logins, for taking the time to restore the source Master database over the newly installed one on the fresh server. What I wanted was the ability to restore the Master database as a user database, call it Master_Mine, from a backup on the source system and then use that restored database to script the SQL Logins and passwords on the DR systems. While I did not attempt this on the trip, the thought stuck in my mind and this past week I succeeded at scripting user accounts and passwords using only a restored copy of the Master database. Granted there were several challenges to overcome.  Also, as is usual for any work like this the usual disclaimers apply:  This is not something that I would imagine Microsoft would condone or support and this was really only an experiment for me to learn if it was even possible. While I have tested the process with success, I do not know that I would use this technique in a documented procedure because future updates for SQL Server will render this technique non-functional. I thought at first, incorrectly of course, that I could use sp_help_revlogin on a restored copy of the master database I named Master_Mine.   Since sp_help_revlogin uses system schema objects, sys.syslogins and sys.server_principals, this was not going to work because all results would come from the main Master database. To test this I added a SQL login via SSMS, backed up Master, restored  it as Master_Mine, and then deleted the login.  Even though the test account I created should presumably still be in the Master_Mine database, I should be able to get to it and script out its creation with its password hash so that I would not need to know the password, but any applications that stored that password would not have to be altered in the DR scenario. They would just work as expected. Once I realized that would not work I began looking deeper.  Knowing that sys.syslogins and sys.server_principals are system views, their underlying code should be available with sp_helptext, right? They were. And this led me to discover the two tables sys.sysxlgns and sys.sysprivs, where the data I needed was stored. These tables existed in both the real Master and the restored copy, Master_Mine.  I used this information to tweak the sp_help_revlogin stored procedure to use these tables instead to create the logins cursor used in sp_help_revlogin. For the password hash,  sp_help_revlogin uses the function LoginProperty() which takes a user name and option ‘passwordhash’ to return the hash for the user. Unfortunately, it requires the login to exist in the Master database. This would not work. So another slight modification I had to make was to pull the password hash itself (pwdhash from sys.sysxlgns) into the logins cursor and comment out the section of sp_help_revlogin that uses LoginProperty. Instead, I pass the pwdhash value as the variable @PWD_varbinary to the sp_hexadecimal stored procedure which is also created by and used within the code provided by Microsoft in the link above for sp_help_revlogin. The final challenge: sys.sysxlgns and sys.server_principals are visible only within a Dedicated Administrator Connection (DAC) query window in SSMS or within SQLCDMD.  To open a DAC connection you have to be logged in on the SQL Server itself, via RDP in my case,  and you preface the server name in the query connection with ADMIN:, so that the server connection looks like ADMIN:ServerName. From there you can create the modified stored procedure in the restored copy of a Master database from a source system as whatever name you like, and then run the modified stored procedure. I named my new stored procedure usp_help_revlogin_MyMaster. Upon execution I was happy to see the logins and password hashes that I needed to apply from the source Master database without having to restore over the new Master system database and without the need to access the original server (assuming it was down due to whatever disaster put it in that state). You will note that I am not providing full code samples here of the modifications. I will say that it was a slight bit of work and anyone who needed to do this for whatever reason, could fairly easily roll their own solution with the information provided herein.  My goal, as I said was to prove that this could be done and provide another option if required to ease the burden of getting SQL Servers up and available in an emergency situation where alternatives may be more challenging or otherwise unavailable.  

  Read the article

• Can not print after upgrading from 12.x to 14.04

  - by user318889

  After upgrading from V12.04 to V14.04 I am not able to print. I am using an HP LaserJet 400 M451dn. The printer troubleshooter told me that there is no solution to the problem. This is the output of the advanced diagnositc output. (Due to limited space I cut the output!) Can anybody tell me what is going wrong. I am using the printer via USB ? Page 1 (Scheduler not running?): {'cups_connection_failure': False} Page 2 (Is local server publishing?): {'local_server_exporting_printers': False} Page 3 (Choose printer): {'cups_dest': , 'cups_instance': None, 'cups_queue': u'HP-LaserJet-400-color-M451dn', 'cups_queue_listed': True} Page 4 (Check printer sanity): {'cups_device_uri_scheme': u'hp', 'cups_printer_dict': {'device-uri': u'hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670', 'printer-info': u'Hewlett-Packard HP LaserJet 400 color M451dn', 'printer-is-shared': True, 'printer-location': u'Pinatubo', 'printer-make-and-model': u'HP LJ 300-400 color M351-M451 Postscript (recommended)', 'printer-state': 4, 'printer-state-message': u'', 'printer-state-reasons': [u'none'], 'printer-type': 8556636, 'printer-uri-supported': u'ipp://localhost:631/printers/HP-LaserJet-400-color-M451dn'}, 'cups_printer_remote': False, 'hplip_output': (['', '\x1b[01mHP Linux Imaging and Printing System (ver. 3.14.6)\x1b[0m', '\x1b[01mDevice Information Utility ver. 5.2\x1b[0m', '', 'Copyright (c) 2001-13 Hewlett-Packard Development Company, LP', 'This software comes with ABSOLUTELY NO WARRANTY.', 'This is free software, and you are welcome to distribute it', 'under certain conditions. See COPYING file for more details.', '', '', '\x1b[01mhp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670\x1b[0m', '', '\x1b[01mDevice Parameters (dynamic data):\x1b[0m', '\x1b[01m Parameter Value(s) \x1b[0m', ' ---------------------------- ----------------------------------------------------------', ' back-end hp ', " cups-printers ['HP-LaserJet-400-color-M451dn'] ", ' cups-uri hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670 ', ' dev-file ', ' device-state -1 ', ' device-uri hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670 ', ' deviceid ', ' error-state 101 ', ' host ', ' is-hp True ', ' panel 0 ', ' panel-line1 ', ' panel-line2 ', ' port 1 ', ' serial CNFF308670 ', ' status-code 5002 ', ' status-desc ', '\x1b[01m', 'Model Parameters (static data):\x1b[0m', '\x1b[01m Parameter Value(s) \x1b[0m', ' ---------------------------- ----------------------------------------------------------', ' align-type 0 ', ' clean-type 0 ', ' color-cal-type 0 ', ' copy-type 0 ', ' embedded-server-type 0 ', ' fax-type 0 ', ' fw-download False ', ' icon hp_color_laserjet_cp2025.png ', ' io-mfp-mode 1 ', ' io-mode 1 ', ' io-support 6 ', ' job-storage 0 ', ' linefeed-cal-type 0 ', ' model HP_LaserJet_400_color_M451dn ', ' model-ui HP LaserJet 400 Color m451dn ', ' model1 HP LaserJet 400 Color M451dn ', ' monitor-type 0 ', ' panel-check-type 0 ', ' pcard-type 0 ', ' plugin 0 ', ' plugin-reason 0 ', ' power-settings 0 ', ' ppd-name lj_300_400_color_m351_m451 ', ' pq-diag-type 0 ', ' r-type 0 ', ' r0-agent1-kind 4 ', ' r0-agent1-sku CE410A/CE410X ', ' r0-agent1-type 1 ', ' r0-agent2-kind 4 ', ' r0-agent2-sku CE411A ', ' r0-agent2-type 4 ', ' r0-agent3-kind 4 ', ' r0-agent3-sku CE413A ', ' r0-agent3-type 5 ', ' r0-agent4-kind 4 ', ' r0-agent4-sku CE412A ', ' r0-agent4-type 6 ', ' scan-src 0 ', ' scan-type 0 ', ' status-battery-check 0 ', ' status-dynamic-counters 0 ', ' status-type 3 ', ' support-released True ', ' support-subtype 2202411 ', ' support-type 2 ', ' support-ver 3.12.2 ', " tech-class ['Postscript'] ", " tech-subclass ['Normal'] ", ' tech-type 4 ', ' usb-pid 3882 ', ' usb-vid 1008 ', ' wifi-config 0 ', '\x1b[01m', 'Status History (most recent first):\x1b[0m', '\x1b[01m Date/Time Code Status Description User Job ID \x1b[0m', ' -------------------- ----- ---------------------------------------- -------- --------', ' 08/21/14 00:07:25 5012 Device communication error richard 0 ', ' 08/20/14 13:42:44 500 Started a print job richard 4214 ', '', '', 'Done.', ''], ['\x1b[35;01mwarning: No display found.\x1b[0m', '\x1b[31;01merror: hp-info -u/--gui requires Qt4 GUI support. Entering interactive mode.\x1b[0m', '\x1b[31;01merror: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670\x1b[0m', '\x1b[31;01merror: Error opening device (Device not found).\x1b[0m', ''], 0), 'is_cups_class': False, 'local_cups_queue_attributes': {'charset-configured': u'utf-8', 'charset-supported': [u'us-ascii', u'utf-8'], 'color-supported': True, 'compression-supported': [u'none', u'gzip'], 'copies-default': 1, 'copies-supported': (1, 9999), 'cups-version': u'1.7.2', 'device-uri': u'hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670', 'document-format-default': u'application/octet-stream', 'document-format-supported': [u'application/octet-stream', u'application/pdf', u'application/postscript', u'application/vnd.adobe-reader-postscript', u'application/vnd.cups-command', u'application/vnd.cups-pdf', u'application/vnd.cups-pdf-banner', u'application/vnd.cups-postscript', u'application/vnd.cups-raw', u'application/vnd.samsung-ps', u'application/x-cshell', u'application/x-csource', u'application/x-perl', u'application/x-shell', u'image/gif', u'image/jpeg', u'image/png', u'image/tiff', u'image/urf', u'image/x-bitmap', u'image/x-photocd', u'image/x-portable-anymap', u'image/x-portable-bitmap', u'image/x-portable-graymap', u'image/x-portable-pixmap', u'image/x-sgi-rgb', u'image/x-sun-raster', u'image/x-xbitmap', u'image/x-xpixmap', u'image/x-xwindowdump', u'text/css', u'text/html', u'text/plain'], 'finishings-default': 3, 'finishings-supported': [3], 'generated-natural-language-supported': [u'en-us'], 'ipp-versions-supported': [u'1.0', u'1.1', u'2.0', u'2.1'], 'ippget-event-life': 15, 'job-creation-attributes-supported': [u'copies', u'finishings', u'ipp-attribute-fidelity', u'job-hold-until', u'job-name', u'job-priority', u'job-sheets', u'media', u'media-col', u'multiple-document-handling', u'number-up', u'output-bin', u'orientation-requested', u'page-ranges', u'print-color-mode', u'print-quality', u'printer-resolution', u'sides'], 'job-hold-until-default': u'no-hold', 'job-hold-until-supported': [u'no-hold', u'indefinite', u'day-time', u'evening', u'night', u'second-shift', u'third-shift', u'weekend'], 'job-ids-supported': True, 'job-k-limit': 0, 'job-k-octets-supported': (0, 470914416), 'job-page-limit': 0, 'job-priority-default': 50, 'job-priority-supported': [100], 'job-quota-period': 0, 'job-settable-attributes-supported': [u'copies', u'finishings', u'job-hold-until', u'job-name', u'job-priority', u'media', u'media-col', u'multiple-document-handling', u'number-up', u'output-bin', u'orientation-requested', u'page-ranges', u'print-color-mode', u'print-quality', u'printer-resolution', u'sides'], 'job-sheets-default': (u'none', u'none'), 'job-sheets-supported': [u'none', u'classified', u'confidential', u'form', u'secret', u'standard', u'topsecret', u'unclassified'], 'jpeg-k-octets-supported': (0, 470914416), 'jpeg-x-dimension-supported': (0, 65535), 'jpeg-y-dimension-supported': (1, 65535), 'marker-change-time': 0, 'media-bottom-margin-supported': [423], 'media-col-default': u'(unknown IPP value tag 0x34)', 'media-col-supported': [u'media-bottom-margin', u'media-left-margin', u'media-right-margin', u'media-size', u'media-source', u'media-top-margin', u'media-type'], 'media-default': u'iso_a4_210x297mm', 'media-left-margin-supported': [423], 'media-right-margin-supported': [423],

  Read the article

• CD/DVD drive not mounted when inserted with Disc of any kind

  - by Cisco Sán

  I just noticed that if a insert a CD or a DVD of any kind, the Drive will start spinning but it will not show the mounted disc. Before it used to ask me what to do with the media inserted. Now it doesn't even do that. I ran in the terminal this code: eject -n and it displays this: " eject: device is `/dev/sr0'" what can I do to get the functionality back on my drive. also ran this command: sudo mount -o ro,unhide,uid=1000 /dev/cdrom /mnt/cdrom but in return i get this: " mount: mount point /mnt/cdrom does not exist" Running Ubuntu 11.10 HERE IS THE HISTORY UNTIL NOW thanks Waltinator: I ran the 'dmesg' but don't know what I'm looking for. Im a newbie on this. The same thing with the 'ls -rlt /var/log' command. Should I create the directory for the mount? at this point really don't know what to do. – Cisco Sán 7 hours ago Here are 3 lines from my dmesg after I successfully inserted a CD: [ 4804.416018] wlan0: no IPv6 routers present [ 8214.125450] ISdit ISO 9660 Extensions: Microsoft Joliet Level 3 [ 8214.136556] ISO 9660 Extensions: RRIP_1991A The first line is a previous event, my wireless going online. The next 2 lines are a good result. The number in square brackets is "seconds since boot", the rest of the line is usually helpful. And no, you should NOT create the mount point. Let's try to get the automatic mounting to work. – waltinator 7 hours ago ok this are my last 3 lines on the 'dmesg' [ 18.130819] init: plymouth-stop pre-start process (1396) terminated with status 1 [ 28.780011] wlan0: no IPv6 routers present [ 505.632119] CE: hpet increased min_delta_ns to 20113 nsec – Cisco Sán 6 hours ago It looks like your CD/DVD drive is not connected to the data bus, and not causing an interrupt when you insert a platter. – waltinator 6 hours ago Try dmesg | grep -A8 CD-ROM which should show you what the system thought was available when it came up. – waltinator 6 hours ago here is my printout [0.774351] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-T40N A100 PQ: 0 ANSI: 5 [0.778117] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [0.778122] cdrom: Uniform CD-ROM driver Revision: 3.20 [0.778282] sr 0:0:0:0: Attached scsi CD-ROM sr0 [0.778340] sr 0:0:0:0: Attached scsi generic sg0 type 5 [0.780416] Freeing unused kernel memory: 984k freed [0.780732] Write protecting the kernel read-only data: 10240k [0.780986] Freeing unused kernel memory: 20k freed [0.786331] Freeing unused kernel memory: 1400k freed [0.804912] udevd[90]: starting version 173 [0.874178] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [0.874208] r8169 0000:02:00.0: PCI INT A - GSI 16 (level, low) - IRQ 16 OK, your system sees the drive. Can you open and close the tray with eject and eject -t? Run udevadm monitor while you insert a CD (type ^C when done) and see if you get "change" and "add" messages. – waltinator 6 hours ago ok, "eject" works perfectly "eject -t" does nothing. this is the message for "udevadm monitor": KERNEL[13771.009267] change /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/block/sr0 (block) UDEV [13773.878887] change /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0 /block/sr0 (block) – Cisco Sán 6 hours ago sudo hwinfo --cdrom (the hwinfo package is installable through Software Center) describes my CD-ROM, try it. – waltinator 4 hours ago My read out from the "sudo hwinfo --cdrom" are the following: hal.1: read hal dataprocess 2753: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 280. This is normally a bug in some application using the D-Bus library. libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files 22: SCSI 00.0: 10602 CD-ROM (DVD) [Created at block.247] Unique ID: KD9E.JgkxTS4hgl2 Parent ID: 3p2J.gdUMCD83e+E SysFS ID: /class/block/sr0 SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0 Hardware Class: cdrom Model: "HL-DT-ST DVD+-RW GSA-T40N" Vendor: "HL-DT-ST" Device: "DVD+-RW GSA-T40N" Revision: "A100" Driver: "ata_piix", "sr" Driver Modules: "ata_piix" Device File: /dev/sr0 (/dev/sg0) Device Files: /dev/sr0, /dev/scd0, /dev/disk/by-id/ata-HL-DT-ST_DVD+_-RW_GSA-T40N_K048BJ74257, /dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:0:0, /dev/cdrom, /dev/cdrw, /dev/dvd, /dev/dvdrw Device Number: block 11:0 (char 21:0) Features: DVD Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #17 (IDE interface) Drive Speed: 31 Volume ID: "Movie" Publisher: "INTERVIDEO" Creation date: "20050424162207000" Thanks for the help. To Castro, hope this is what you meant and sorry for the comments..

  Read the article

• How to diagnose computer lockups and freezes?

  - by Scott Mitchell

  I built a desktop computer a couple years back with the following specs: CPU: Intel Core 2 Quad Q9300 Yorkfield 2.5GHz 6 MB L2 Cache LGA 775 95W Quad-Core Processor BX80580Q9300 Motherboard: EVGA 122-CK-NF68-T1 LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard Video Card: Two EVGA 256-P2-N758-TR GeForce 8600GT SCC 256 MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card PSU: SeaSonic S12 Energy Plus SS-550HT 550W ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS Certified Active PFC Power Supply Memory: Two G.SKILL 4 GB (2 x 2 GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-4GBPQ Since its inception, the machine has periodically locked up, the regularity having varied over the years from once a day to once a month. Typically, lockups happen once every few days. By "lockup" I mean my computer just freezes. The screen locks up, I can't move the mouse. Hitting keys on my keyboard that normally turn LEDs on or off on the keyboard (such as Caps Lock) no longer turn the LEDs on or off. If there was music playing at the time of the lockup, noise keeps coming out of the speakers, but it's just the current frequency/note that plays indefinitely. There is no BSOD. When such a lockup occurs I have to do a hard reboot by either turning off the computer or hitting the reset button. I have the most recent version of the NVIDIA hardware drivers, and update them semi-regularly, but that hasn't seemed to help. I am currently using Windows 7 x64, but was previously using Windows Server 2003 x64 and having the same lockup issues. My guess is that it's somehow video driver or motherboard related, but I don't know how to go about diagnosing this problem to narrow down which of the two is the culprit. Additional information re: cooling Regarding cooling... I've not installed any after-market cooling systems aside from two regular fans I scavenged from an older computer. The fan atop the CPU is the one that shipped with it. One of the two scavenged fans I added it located at the bottom tower of the corner, in an attempt to create some airflow from front to back. The second fan is pointed directly at the two video cards. SpeedFan installation and readings Per studiohack's suggestion, I installed SpeedFan, which provided the following temperature readings: GPU: 63C GPU: 65C System: 76C CPU: 64C AUX: 36C Core 0: 78C Core 1: 76C Core 2: 79C Core 3: 79C Update #3: Another Lockup :-( Well, I had another lockup last night. :-( SpeedFan reported the CPU temp at 38 C when it happened, and there was no spike in temperature leading up to the freeze. One thing I notice is that the freeze seems more likely to happen if I am watching a video. In fact, of the last 5 freezes over the past month, 4 of them have been while watching a video on Flickr. Not necessarily the same video, but a video nevertheless. I don't know if this is just coincidence or if it means anything. (As an aside, each night before bedtime my 2 year old daughter sits on my lap and watches some home videos on Flickr and, in the last month, has learned the phrase, "Uh oh, computer broke.") Update #4: MemTest86 and 3DMark06 Test Results: Per suggestions in the comments, I ran the MemTest86 overnight and it cycled through the 8 GB of memory 5 times without error. I also ran the 3DMark06 test without a problem (see my scores at http://3dmark.com/3dm06/15163549). So... what now? :-) Any further suggestions on what to check? Is there some way to get a stack trace or something when the computer locks like that? Resolution I have never did figure out the particular problems, but based on the suggestions here and elsewhere, I'm presuming it was a motherboard issue. In any event, I recently upgraded my system, buying a new motherbeard, PSU, CPU, and RAM, and that new rig has been working splendidly the past several weeks. I am using the same graphic cards as in the old setup, so I think it's safe to reason that they weren't the cause of the problem.

  Read the article

• WSS 3.0 to SharePoint 2010: Tips for delaying the Visual Upgrade

  - by Kelly Jones

  My most recent project has been to migrate a bunch of sites from WSS 3.0 (SharePoint 2007) to SharePoint Server 2010.  The users are currently working with WSS 3.0 and Office 2003, so the new ribbon based UI in 2010 will be completely new.  My client wants to avoid the new SharePoint 2010 look and feel until they’ve had time to train their users, so we’ve been testing the upgrades by keeping them with the 2007 user interface. Permission to perform the Visual Upgrade One of the first things we noticed was the default permissions for who was allowed to switch the UI from 2007 to 2010.  By default, site collection administrators and site owners can do this.  Since we wanted to more tightly control the timing of the new UI, I added a few lines to the PowerShell script that we are using to perform the migration.  This script creates the web application, sets the User Policy, and then does a Mount-SPDatabase to attach the old 2007 content database to the 2010 farm.  I added the following steps after the Mount-SPDatabase step: #Remove the visual upgrade option for site owners # it remains for Site Collection administrators foreach ($sc in $WebApp.Sites){ foreach ($web in $sc.AllWebs){ #Visual Upgrade permissions for the site/subsite (web) $web.UIversionConfigurationEnabled = $false; $web.Update(); } } These script steps loop through each Site Collection in a particular web application ($WebApp) and then it loops through each subsite ($web) in the Site Collection ($sc) and disables the Site Owner’s permission to perform the Visual Upgrade. This is equivalent to going to the Site Collection administrator settings page –> Visual Upgrade and selecting “Hide Visual Upgrade”. Since only IT people have Site Collection administrator privileges, this will allow IT to control the timing of the new 2010 UI rollout. Newly created subsites Our next issue was brought to our attention by SharePoint Joel’s blog post last week (http://www.sharepointjoel.com/Lists/Posts/Post.aspx?ID=524 ).  In it, he lists some updates about the 2010 upgrade, and his fourth point was one that I hadn’t seen yet: 4. If a 2007 upgraded site has not been visually upgraded, the sites created underneath it will look like 2010 sites – While this is something I’ve been aware of, I think many don’t realize how this impacts common look and feel for master pages, and how it impacts good navigation and UI. As well depending on your patch level you may see hanging behavior in the list picker. The site and list creation Silverlight control in Internet Explorer is looking for resources that don’t exist in the galleries in the 2007 site, and hence it continues to spin and spin and eventually time out. The work around is to upgrade to SP1, or use Chrome or Firefox which won’t attempt to render the Silverlight control. When the root site collection is a 2007 site and has it’s set of galleries and the children are 2010 sites there is some strange behavior linked to the way that the galleries work and pull from the parent. Our production SharePoint 2010 Farm has SP1 installed, as well as the December 2011 Cumulative Update, so I think the “hanging behavior” he mentions won’t affect us. However, since we want to control the roll out of the UI, we are concerned that new subsites will have the 2010 look and feel, no matter what the parent site has. Ok, time to dust off my developer skills. I first looked into using feature stapling, but I couldn’t get that to work (although I’m pretty sure I had everything wired up correctly).  Then I stumbled upon SharePoint 2010’s web events – a great way to handle this. Using Visual Studio 2010, I created a new SharePoint project and added a Web Event Receiver: In the Event Receiver class, I used the WebProvisioned method to check if the parent site is a 2007 site (UIVersion = 3), and if so, then set the newly created site to 2007:   /// <summary> /// A site was provisioned. /// </summary> public override void WebProvisioned(SPWebEventProperties properties) { base.WebProvisioned(properties);   try { SPWeb curweb = properties.Web;   if (curweb.ParentWeb != null) {   //check if the parent website has the 2007 look and feel if (curweb.ParentWeb.UIVersion == 3) { //since parent site has 2007 look and feel // we'll apply that look and feel to the current web curweb.UIVersion = 3; curweb.Update(); } } } catch (Exception) { //TODO: Add logging for errors } }   This event is part of a Feature that is scoped to the Site Level (Site Collection).  I added a couple of lines to my migration PowerShell script to activate the Feature for any site collections that we migrate. Plan Going Forward The plan going forward is to perform the visual upgrade after the users for a particular site collection have gone through 2010 training. If we need to do several site collections at once, we’ll use a PowerShell script to loop through each site collection to update the sites to 2010.  If it’s just one or two, we’ll be using the “Update All Sites” button on the Visual Upgrade page for Site Collection Administrators. The custom code for newly created sites won’t need to be changed, since it relies on the UI version of the parent site.  If the parent is 2010, then the new site will look 2010.

  Read the article

• Inside BackgroundWorker

  - by João Angelo

  The BackgroundWorker is a reusable component that can be used in different contexts, but sometimes with unexpected results. If you are like me, you have mostly used background workers while doing Windows Forms development due to the flexibility they offer for running a background task. They support cancellation and give events that signal progress updates and task completion. When used in Windows Forms, these events (ProgressChanged and RunWorkerCompleted) get executed back on the UI thread where you can freely access your form controls. However, the logic of the progress changed and worker completed events being invoked in the thread that started the background worker is not something you get directly from the BackgroundWorker, but instead from the fact that you are running in the context of Windows Forms. Take the following example that illustrates the use of a worker in three different scenarios: – Console Application or Windows Service; – Windows Forms; – WPF. using System; using System.ComponentModel; using System.Threading; using System.Windows.Forms; using System.Windows.Threading; class Program { static AutoResetEvent Synch = new AutoResetEvent(false); static void Main() { var bw1 = new BackgroundWorker(); var bw2 = new BackgroundWorker(); var bw3 = new BackgroundWorker(); Console.WriteLine("DEFAULT"); var unspecializedThread = new Thread(() => { OutputCaller(1); SynchronizationContext.SetSynchronizationContext( new SynchronizationContext()); bw1.DoWork += (sender, e) => OutputWork(1); bw1.RunWorkerCompleted += (sender, e) => OutputCompleted(1); // Uses default SynchronizationContext bw1.RunWorkerAsync(); }); unspecializedThread.IsBackground = true; unspecializedThread.Start(); Synch.WaitOne(); Console.WriteLine(); Console.WriteLine("WINDOWS FORMS"); var windowsFormsThread = new Thread(() => { OutputCaller(2); SynchronizationContext.SetSynchronizationContext( new WindowsFormsSynchronizationContext()); bw2.DoWork += (sender, e) => OutputWork(2); bw2.RunWorkerCompleted += (sender, e) => OutputCompleted(2); // Uses WindowsFormsSynchronizationContext bw2.RunWorkerAsync(); Application.Run(); }); windowsFormsThread.IsBackground = true; windowsFormsThread.SetApartmentState(ApartmentState.STA); windowsFormsThread.Start(); Synch.WaitOne(); Console.WriteLine(); Console.WriteLine("WPF"); var wpfThread = new Thread(() => { OutputCaller(3); SynchronizationContext.SetSynchronizationContext( new DispatcherSynchronizationContext()); bw3.DoWork += (sender, e) => OutputWork(3); bw3.RunWorkerCompleted += (sender, e) => OutputCompleted(3); // Uses DispatcherSynchronizationContext bw3.RunWorkerAsync(); Dispatcher.Run(); }); wpfThread.IsBackground = true; wpfThread.SetApartmentState(ApartmentState.STA); wpfThread.Start(); Synch.WaitOne(); } static void OutputCaller(int workerId) { Console.WriteLine( "bw{0}.{1} | Thread: {2} | IsThreadPool: {3}", workerId, "RunWorkerAsync".PadRight(18), Thread.CurrentThread.ManagedThreadId, Thread.CurrentThread.IsThreadPoolThread); } static void OutputWork(int workerId) { Console.WriteLine( "bw{0}.{1} | Thread: {2} | IsThreadPool: {3}", workerId, "DoWork".PadRight(18), Thread.CurrentThread.ManagedThreadId, Thread.CurrentThread.IsThreadPoolThread); } static void OutputCompleted(int workerId) { Console.WriteLine( "bw{0}.{1} | Thread: {2} | IsThreadPool: {3}", workerId, "RunWorkerCompleted".PadRight(18), Thread.CurrentThread.ManagedThreadId, Thread.CurrentThread.IsThreadPoolThread); Synch.Set(); } } Output: //DEFAULT //bw1.RunWorkerAsync | Thread: 3 | IsThreadPool: False //bw1.DoWork | Thread: 4 | IsThreadPool: True //bw1.RunWorkerCompleted | Thread: 5 | IsThreadPool: True //WINDOWS FORMS //bw2.RunWorkerAsync | Thread: 6 | IsThreadPool: False //bw2.DoWork | Thread: 5 | IsThreadPool: True //bw2.RunWorkerCompleted | Thread: 6 | IsThreadPool: False //WPF //bw3.RunWorkerAsync | Thread: 7 | IsThreadPool: False //bw3.DoWork | Thread: 5 | IsThreadPool: True //bw3.RunWorkerCompleted | Thread: 7 | IsThreadPool: False As you can see the output between the first and remaining scenarios is somewhat different. While in Windows Forms and WPF the worker completed event runs on the thread that called RunWorkerAsync, in the first scenario the same event runs on any thread available in the thread pool. Another scenario where you can get the first behavior, even when on Windows Forms or WPF, is if you chain the creation of background workers, that is, you create a second worker in the DoWork event handler of an already running worker. Since the DoWork executes in a thread from the pool the second worker will use the default synchronization context and the completed event will not run in the UI thread.

  Read the article

• VMware vSphere cluster design for site redundancy

  - by Stefan Radovanovici

  I have a question about the best design for site redudancy when using vSphere clusters. A bit of background info about our situation first though. We are a medium-sized company with two main offices, located in different countries. Our networks are linked by a Layer2 150Mbps leased line which is currently underused. We have a variety of services running for internal use within the company, some on physycal servers and some on existing vSphere clusters. In our department we also run several services (almost all running under various forms of Linux) like NTP, Syslog, jump servers, monitoring servers and so on. We have now the requirement that those servers need to be redundant within each location (which they are not at the moment) and also site redudant (which they are to some extent, the servers are duplicated in the 2nd location with configurations kept in sync via various methods at the application layer). There is no SAN available for us, at least not something that we can use at the moment. Cost is also an issue. While we do have some budget available for this, we can't afford to buy SANs for both locations for example. I looked at the VSA feature and it seems that this could be something for us but I am unsure how to solve the site-redudancy requirement. At the moment for testing purposes I am setting up in a lab a vSphere 5 with VSA on two ESXi hosts. I am currently using the Essentials Plus kit with VSA license, which allows me to build a VSA cluster on up to 3 hosts, together with a vCenter license to manage them. The hosts each have two dual-port network cards and two 600GB drives, running in Raid1. Hardware-wise this will be enough for us to run the all the services we need as VMs and will provide redundandcy within the site. At the moment I see only two option to have site redundancy: build an identical VSA cluter in the second location and keep the various services sync'ed at application layer (database sync, rsync and so on). simply move one of the hosts from the existing cluster to the second location, basically having the VSA cluster span the 150Mbps link between the sites. I would very much prefer the second option but I am unsure how well it'll work, if it can work at all. Technically it should, we can span the needed VLANs across the leased line and have them available in the second location. The advantage would be that we don't need to worry at all about sync'ing databases and the like. But I have the feeling that the bandwidth will not be enough, I have no way of knowing how much traffic will the VSA cluster generate between the hosts. I realize that this will most likely depend on the individual usage of the VMs but still, I have no idea how VSA replicates data between the ESXi hosts. Are these my only options or can my goals be achieved in some other way ? Is there perhaps a way to have some sort of "cold stand by" cluster in the second location where the VMs would be sync'ed once per night from the main location ? The idea is that in case the first site becomes unavailable, we would be able to bring all those VMs online there. We would be ok with the data being 1 day old. Any answers are appreciated. Best regards, Stefan

  Read the article

• Hybrid IT or Cloud Initiative – a Perfect Enterprise Architecture Maturation Opportunity

  - by Ted McLaughlan

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} All too often in the growth and maturation of Enterprise Architecture initiatives, the effort stalls or is delayed due to lack of “applied traction”. By this, I mean the EA activities - whether targeted towards compliance, risk mitigation or value opportunity propositions – may not be attached to measurable, active, visible projects that could advance and prove the value of EA. EA doesn’t work by itself, in a vacuum, without collaborative engagement and a means of proving usefulness. A critical vehicle to this proof is successful orchestration and use of assets and investment resources to meet a high-profile business objective – i.e. a successful project. More and more organizations are now exploring and considering some degree of IT outsourcing, buying and using external services and solutions to deliver their IT and business requirements – vs. building and operating in-house, in their own data centers. The rapid growth and success of “Cloud” services makes some decisions easier and some IT projects more successful, while dramatically lowering IT risks and enabling rapid growth. This is particularly true for “Software as a Service” (SaaS) applications, which essentially are complete web applications hosted and delivered over the Internet. Whether SaaS solutions – or any kind of cloud solution - are actually, ultimately the most cost-effective approach truly depends on the organization’s business and IT investment strategy. This leads us to Enterprise Architecture, the connectivity between business strategy and investment objectives, and the capabilities purchased or created to meet them. If an EA framework already exists, the approach to selecting a cloud-based solution and integrating it with internal IT systems (i.e. a “Hybrid IT” solution) is well-served by leveraging EA methods. If an EA framework doesn’t exist, or is simply not mature enough to address complex, integrated IT objectives – a hybrid IT/cloud initiative is the perfect project to advance and prove the value of EA. Why is this? For starters, the success of any complex IT integration project - spanning multiple systems, contracts and organizations, public and private – depends on active collaboration and coordination among the project stakeholders. For a hybrid IT initiative, inclusive of one or more cloud services providers, the IT services, business workflow and data governance challenges alone can be extremely complex, requiring many diverse layers of organizational expertise and authority. Establishing subject matter expertise, authorities and strategic guidance across all the disciplines involved in a hybrid-IT or hybrid-cloud system requires top-level, comprehensive experience and collaborative leadership. Tools and practices reflecting industry expertise and EA alignment can also be very helpful – such as Oracle’s “Cloud Candidate Selection Tool”. Using tools like this, and facilitating this critical collaboration by leading, organizing and coordinating the input and expertise into a shared, referenceable, reusable set of authority models and practices – this is where EA shines, and where Enterprise Architects can be most valuable. The “enterprise”, in this case, becomes something greater than the core organization – it includes internal systems, public cloud services, 3rd-party IT platforms and datacenters, distributed users and devices; a whole greater than the sum of its parts. Through facilitated project collaboration, leading to identification or creation of solid governance models and processes, a durable and useful Enterprise Architecture framework will usually emerge by itself, if not actually identified and managed as such. The transition from planning collaboration to actual coordination, where the program plan, schedule and resources become synchronized and aligned to other investments in the organization portfolio, is where EA methods and artifacts appear and become most useful. The actual scope and use of these artifacts, in the context of this project, can then set the stage for the most desirable, helpful and pragmatic form of the now-maturing EA framework and community of practice. Considering or starting a hybrid-IT or hybrid-cloud initiative? Running into some complex relationship challenges? This is the perfect time to take advantage of your new, growing or possibly latent Enterprise Architecture practice.

  Read the article

• Examine your readiness for managing Enterprise Private Cloud

  - by Anand Akela

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Cloud computing promises to deliver greater agility to meet demanding  business needs, operational efficiencies, and lower cost. However these promises cannot be realized and enterprises may not be able to get the best value out of their enterprise private cloud computing infrastructure without a comprehensive cloud management solution . Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Take this new self-assessment quiz that measures the readiness of your enterprise private cloud. It scores your readiness in the following areas and discover where and how you can improve to gain total cloud control over your enterprise private cloud. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Complete Cloud Lifecycle Solution Check if you are ready to manage all phases of the building, managing, and consuming an enterprise cloud. You will learn how Oracle can help build and manage a rich catalog of cloud services – whether it is Infrastructure-as-a-Service, Database-as-a-Service, or Platform-as-a-Service, all from a single product. Integrated Cloud Stack Management Integrated management of the entire cloud stack – all the way from application to disk, is very important to eliminate the integration pains and costs that customers would have to otherwise incur by trying to create a cloud environment by integrating multiple point solutions. Business-Driven Clouds It is critical that an enterprise Cloud platform is not only able to run applications but also has deep business insight and visibility. Oracle Enterprise Manager 12c enables creation of application-aware and business-driven clouds that has deep insight into applications, business services and transactions. As the leading providers of business applications and the middleware, we are able to offer you a cloud solution that is optimized for business services. Proactive Management Integration of the enterprise cloud infrastructure with support can allow cloud administrators to benefit from Automatic Service Requests (ASR), proactive patch recommendations, health checks and end-of-life advisory for all of the technology deployed within cloud. Learn more about solution for Enterprise Cloud and Cloud management by attending various sessions , demos and hand-on labs at Oracle Open World 2012 . Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

  Read the article

• Content in Context: The right medicine for your business applications

  - by Lance Shaw

  For many of you, your companies have already invested in a number of applications that are critical to the way your business is run. HR, Payroll, Legal, Accounts Payable, and while they might need an upgrade in some cases, they are all there and handling the lifeblood of your business. But are they really running as efficiently as they could be? For many companies, the answer is no. The problem has to do with the important information caught up within documents and paper. It’s everywhere except where it truly needs to be – readily available right within the context of the application itself. When the right information cannot be easily found, business processes suffer significantly. The importance of this recently struck me when I recently went to meet my new doctor and get a routine physical. Walking into the office lobby, I couldn't help but notice rows and rows of manila folders in racks from floor to ceiling, filled with documents and sensitive, personal information about various patients like myself.  As I looked at all that paper and all that history, two things immediately popped into my head.  “How do they find anything?” and then the even more alarming, “So much for information security!” It sure looked to me like all those documents could be accessed by anyone with a key to the building. Now the truth is that the offices of many general practitioners look like this all over the United States and the world.  But it had me thinking, is the same thing going on in just about any company around the world, involving a wide variety of important business processes? Probably so. Think about all the various processes going on in your company right now. Invoice payments are being processed through Accounts Payable, contracts are being reviewed by Procurement, and Human Resources is reviewing job candidate submissions and doing background checks. All of these processes and many more like them rely on access to forms and documents, whether they are paper or digital. Now consider that it is estimated that employee’s spend nearly 9 hours a week searching for information and not finding it. That is a lot of very well paid employees, spending more than one day per week not doing their regular job while they search for or re-create what already exists. Back in the doctor’s office, I saw this trend exemplified as well. First, I had to fill out a new patient form, even though my previous doctor had transferred my records over months previously. After filling out the form, I was later introduced to my new doctor who then interviewed me and asked me the exact same questions that I had answered on the form. I understand that there is value in the interview process and it was great to meet my new doctor, but this simple process could have been so much more efficient if the information already on file could have been brought directly together with the new patient information I had provided. Instead of having a highly paid medical professional re-enter the same information into the records database, the form I filled out could have been immediately scanned into the system, associated with my previous information, discrepancies identified, and the entire process streamlined significantly. We won’t solve the health records management issues that exist in the United States in this blog post, but this example illustrates how the automation of information capture and classification can eliminate a lot of repetitive and costly human entry and re-creation, even in a simple process like new patient on-boarding. In a similar fashion, by taking a fresh look at the various processes in place today in your organization, you can likely spot points along the way where automating the capture and access to the right information could be significantly improved. As you evaluate how content-process flows through your organization, take a look at how departments and regions share information between the applications they are using. Business applications are often implemented on an individual department basis to solve specific problems but a holistic approach to overall information management is not taken at the same time. The end result over the years is disparate applications with separate information repositories and in many cases these contain duplicate information, or worse, slightly different versions of the same information. This is where Oracle WebCenter Content comes into the story. More and more companies are realizing that they can significantly improve their existing application processes by automating the capture of paper, forms and other content. This makes the right information immediately accessible in the context of the business process and making the same information accessible across departmental systems which has helped many organizations realize significant cost savings. Here on the Oracle WebCenter team, one of our primary goals is to help customers find new ways to be more effective, more cost-efficient and manage information as effectively as possible. We have a series of three webcasts occurring over the next few weeks that are focused on the integration of enterprise content management within the context of business applications. We hope you will join us for one or all three and that you will find them informative. Click here to learn more about these sessions and to register for them. There are many aspects of information management to consider as you look at integrating content management within your business applications. We've barely scratched the surface here but look for upcoming blog posts where we will discuss more specifics on the value of delivering documents, forms and images directly within applications like Oracle E-Business Suite, PeopleSoft Enterprise, JD Edwards Enterprise One, Siebel CRM and many others. What do you think?  Are your important business processes as healthy as they can be?  Do you have any insights to share on the value of delivering content directly within critical business processes? Please post a comment and let us know the value you have realized, the lessons learned and what specific areas you are interested in.

  Read the article

• CS, SE, HCI, Information Science, Please recommendation for further education of the former performing art manager seeking career in IT industries? [on hold]

  - by Baek Seungjoo

  IT specialists there J Thank you very much for your collective efforts here, and I got huge help reading your professional comments and advices on each questions I have searched so far! This time, I would like to ask for your practical advices or recommendation on what I am struggling on at this moment. I am currently seeking higher education for my career transition from performing art manager and director to “IT software and/or service development and management specialist”. However, as this field is quite new to me, and there are lots of different work positions, I have no idea which grad major I better pursue in order to get qualification. Of course I know this question could sounds wired as it is kind of personal choice. But my lack of understanding on how IT software companies work in general, your practical and experience-based advice will be great help to me, who spent more than two months of self-research on net. OK. Before my question, here is my plan and history, which are quite different from those currently in IT industry I think… 1) Target Firstly, get career transition into IT service or products companies and get experiences. Eventually, pursue IT entrepreneurship in combination with my arts and cultural production and business expertise. 2) Background Career: performing arts director and manager in theatre-based scale opera and musical Art education in youth BA in literature and Chinese studies (Art & Humanities) MA in Cultural & Creative Industries (Art & Humanities) – dissertation with focus on digital prosumption and the lived experience of the prosumer. (a qualitative research on the agents in the digital world) 2) Personally Huge interest in IT hardware and software, and their trend. Skills to build up, repair, tune PCs -of course this is no more than personal hobby, but shows my interests in this field. 4) Problem Encounter a question “So, what do you think you can contribute practically in this position”. This question turn me down everytime I go through job interviews, and I decided more education in the relevant area. Here are my questions. 1) In terms of work positions in IT software companies, I wonder if I can put the comparison of what “Artists” is to “Arts Manager or Director” is what “Developer” is to “Product Manager”. (Of course, this stereotypical division of Artist-Art Manager is out of sense because the domain overlaps to some extent, and is blurring at least in my field, and they are in different contexts, but just speaking easily.) Normally, artist comes with special arts educations, and they live in their own world of artistic inspiration and creation, and they feel alive in practice and on stages. Meanwhile, from the point of staging and managing productions, the role of art manager is critical as well. Our role cares how the production appeals to the audience in effective way, how to make profit and future sustainable management through that, how to set up future strategy in consideration of the external conditions such as political and social circumstances, audience trend and level, other production trends from on-going and historical perspectives, how and what the production make voice to the society from political, economic, humanitarian stances. So, we need keen eyes on economic, political, and societal environment, have to understand human-being and their desires, must know how to make presentation and attract investors, must have sense in managing and fighting over the limited financial resource, how to extend networking and so on. It is common that the two agents create productions in collaboration (normally not in that ideal way but in conflict and fight though J ). So, we need to know each other’s expertise to some extent, for better production. What are the work positions in IT software industries equivalent to the role of “art manager” in performing arts? From my view, considering developers come with special education in the world of computer science, software engineering, or others (self-education sometimes), and they express themselves with the arts of coding, computer languages on the black screen, and make sort of their artistic production online to the audience, I guess there might be someone who collaborate with developers in creating, managing, and launching IT services or products. 2) Which education among CS, SE, HCI, Information Science, is needed for those seeking such work position? Especially for person like me. (At this moment, Information Science has the highest possibility to get in, since I lack Calculus and Math in undergrad educaiton. But please let me know irrespective of this concern, I think there are ways to back it up if CS or SE education needed in my case) 3) Which field between Information Science and HCI can be more practical background regarding job hungting? And which of them have more demands in job market? AS I checked, HCI is more close to CS than IS in its focus of study area. Thank you very much for your patience reading such a long inquiry, and I appreciate to your efforts in advance. Have a nice day in this beautiful summer.

  Read the article

• Draw Bug 2D player Camera

  - by RedShft

  I have just implemented a 2D player camera for my game, everything works properly except the player on the screen jitters when it moves between tiles. What I mean by jitter, is that if the player is moving the camera updates the tileset to be drawn and if the player steps to the right, the camera snaps that way. The movement is not smooth. I'm guessing this is occurring because of how I implemented the function to calculate the current viewable area or how my draw function works. I'm not entirely sure how to fix this. This camera system was entirely of my own creation and a first attempt at that, so it's very possible this is not a great way of doing things. My camera class, pulls information from the current tileset and calculates the viewable area. Right now I am targettng a resolution of 800 by 600. So I try to fit the appropriate amount of tiles for that resolution. My camera class, after calculating the current viewable tileset relative to the players location, returns a slice of the original tileset to be drawn. This tileset slice is updated every frame according to the players position. This slice is then passed to the map class, which draws the tile on screen. //Map Draw Function //This draw function currently matches the GID of the tile to it's location on the //PNG file of the tileset and then draws this portion on the screen void Draw(SDL_Surface* background, int[] _tileSet) { enforce( tilesetImage != null, "Tileset is null!"); enforce( background != null, "BackGround is null!"); int i = 0; int j = 0; SDL_Rect DestR, SrcR; SrcR.x = 0; SrcR.y = 0; SrcR.h = 32; SrcR.w = 32; foreach(tile; _tileSet) { //This code is matching the current tiles ID to the tileset image SrcR.x = cast(short)(tileWidth * (tile >= 11 ? (tile - ((tile / 10) * 10) - 1) : tile - 1)); SrcR.y = cast(short)(tileHeight * (tile > 10 ? (tile / 10) : 0)); //Applying the tile to the surface SDL_BlitSurface( tilesetImage, &SrcR, background, &DestR ); //this keeps track of what column/row we are on i++; if ( i == mapWidth ) { i = 0; j++; } DestR.x = cast(short)(i * tileWidth); DestR.y = cast(short)(j * tileHeight); } } //Camera Class class Camera { private: //A rectangle representing the view area SDL_Rect viewArea; //In number of tiles int viewAreaWidth; int viewAreaHeight; //This is the x and y coordinate of the camera in MAP SPACE IN PIXELS vect2 cameraCoordinates; //The player location in map space IN PIXELS vect2 playerLocation; //This is the players location in screen space; vect2 playerScreenLoc; int playerTileCol; int playerTileRow; int cameraTileCol; int cameraTileRow; //The map is stored in a single array with the tile ids //this corresponds to the index of the starting and ending tile int cameraStartTile, cameraEndTile; //This is a slice of the current tile set int[] tileSetCopy; int mapWidth; int mapHeight; int tileWidth; int tileHeight; public: this() { this.viewAreaWidth = 25; this.viewAreaHeight = 19; this.cameraCoordinates = vect2(0, 0); this.playerLocation = vect2(0, 0); this.viewArea = SDL_Rect (0, 0, 0, 0); this.tileWidth = 32; this.tileHeight = 32; } void Init(vect2 playerPosition, ref int[] tileSet, int mapWidth, int mapHeight ) { playerLocation = playerPosition; this.mapWidth = mapWidth; this.mapHeight = mapHeight; CalculateCurrentCameraPosition( tileSet, playerPosition ); //writeln( "Tile Set Copy: ", tileSetCopy ); //writeln( "Orginal Tile Set: ", tileSet ); } void CalculateCurrentCameraPosition( ref int[] tileSet, vect2 playerPosition ) { playerLocation = playerPosition; playerTileCol = cast(int)((playerLocation.x / tileWidth) + 1); playerTileRow = cast(int)((playerLocation.y / tileHeight) + 1); //writeln( "Player Tile (Column, Row): ","(", playerTileCol, ", ", playerTileRow, ")"); cameraTileCol = playerTileCol - (viewAreaWidth / 2); cameraTileRow = playerTileRow - (viewAreaHeight / 2); CameraMapBoundsCheck(); //writeln( "Camera Tile Start (Column, Row): ","(", cameraTileCol, ", ", cameraTileRow, ")"); cameraStartTile = ( (cameraTileRow - 1) * mapWidth ) + cameraTileCol - 1; //writeln( "Camera Start Tile: ", cameraStartTile ); cameraEndTile = cameraStartTile + ( viewAreaWidth * viewAreaHeight ) * 2; //writeln( "Camera End Tile: ", cameraEndTile ); tileSetCopy = tileSet[cameraStartTile..cameraEndTile]; } vect2 CalculatePlayerScreenLocation() { cameraCoordinates.x = cast(float)(cameraTileCol * tileWidth); cameraCoordinates.y = cast(float)(cameraTileRow * tileHeight); playerScreenLoc = playerLocation - cameraCoordinates + vect2(32, 32);; //writeln( "Camera Coordinates: ", cameraCoordinates ); //writeln( "Player Location (Map Space): ", playerLocation ); //writeln( "Player Location (Screen Space): ", playerScreenLoc ); return playerScreenLoc; } void CameraMapBoundsCheck() { if( cameraTileCol < 1 ) cameraTileCol = 1; if( cameraTileRow < 1 ) cameraTileRow = 1; if( cameraTileCol + 24 > mapWidth ) cameraTileCol = mapWidth - 24; if( cameraTileRow + 19 > mapHeight ) cameraTileRow = mapHeight - 19; } ref int[] GetTileSet() { return tileSetCopy; } int GetViewWidth() { return viewAreaWidth; } }

  Read the article

• "LNK2001: unresolved external symbol" when trying to build my program

  - by random

  I get the following error(s) on my program that captures the mouse and then draws a line. Errors: 1>------ Build started: Project: Capture_Mouse_Line, Configuration: Debug Win32 ------ 1> main.cpp 1>main.obj : error LNK2001: unresolved external symbol "public: static long * Line::yc2" (?yc2@Line@@2PAJA) 1>main.obj : error LNK2001: unresolved external symbol "public: static long * Line::xc2" (?xc2@Line@@2PAJA) 1>main.obj : error LNK2001: unresolved external symbol "public: static long * Line::yc1" (?yc1@Line@@2PAJA) 1>main.obj : error LNK2001: unresolved external symbol "public: static long * Line::xc1" (?xc1@Line@@2PAJA) 1>MSVCRTD.lib(crtexe.obj) : error LNK2019: unresolved external symbol _main referenced in function ___tmainCRTStartup 1>D:\Visual C++ Projects\Capture_Mouse_Line\Debug\Capture_Mouse_Line.exe : fatal error LNK1120: 5 unresolved externals ========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ========== Here is my code: #include<allegro5\allegro.h> #include<allegro5\allegro_native_dialog.h> #include<allegro5\allegro_primitives.h> #include<Windows.h> #include<allegro5\allegro_windows.h> #ifndef WIDTH #define WIDTH 1440 #endif #ifndef HEIGHT #define HEIGHT 900 #endif class Line { public: static void ErasePreviousLine(); static void DrawLine(long* x, long* y,long* x2,long* y2); static bool Erasable(); static long* xc1; static long* yc1; static long* xc2; static long* yc2; }; void Line::ErasePreviousLine() { delete xc1; xc1 = NULL; delete yc1; yc1 = NULL; delete xc2; xc2 = NULL; delete yc2; yc2 = NULL; } bool Line::Erasable() { if(xc1 && yc1 && xc2 && yc2 == NULL) { return false; } else { return true; } } void Line::DrawLine(long* x,long* y,long* x2,long* y2) { if(!al_init_primitives_addon()) { al_show_native_message_box(NULL,NULL,NULL,"failed to initialize allegro", NULL,NULL); } xc1 = x; yc1 = y; xc2 = x2; yc2 = y2; al_draw_line((float)*xc1, (float)*yc1, (float)*xc2, (float)*yc2,al_map_rgb(255,0,255), 1); delete x; delete y; delete x2; delete y2; } LRESULT CALLBACK WndProc(HWND hwnd, UINT msg, WPARAM wParam, LPARAM lParam); int WINAPI WinMain(HINSTANCE hInstance,HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nCmdShow) { MSG msg; ALLEGRO_DISPLAY* display = NULL; if(!al_init()) { al_show_native_message_box(NULL,NULL,NULL,"failed to initialize allegro", NULL,NULL); return -1; } display = al_create_display(WIDTH,HEIGHT); if(!display) { al_show_native_message_box(NULL,NULL,NULL,"failed to initialize display", NULL,NULL); return -1; } HWND hwnd = al_get_win_window_handle(display); if(hwnd == NULL) { MessageBox(NULL, "Window Creation Failed!", "Error!", MB_ICONEXCLAMATION | MB_OK); return 0; } ShowWindow(hwnd, nCmdShow); UpdateWindow(hwnd); while(GetMessage(&msg, NULL, 0, 0) > 0) { TranslateMessage(&msg); DispatchMessage(&msg); } return msg.wParam; } LRESULT CALLBACK WndProc(HWND hwnd, UINT msg, WPARAM wParam, LPARAM lParam) { static bool bIsCaptured; static POINTS ptsBegin; static POINTS ptsEnd; switch(msg) { case WM_LBUTTONDOWN: SetCapture(hwnd); bIsCaptured = true; ptsBegin = MAKEPOINTS(lParam); return 0; case WM_MOUSEMOVE: if(wParam & MK_LBUTTON) { if(!Line::Erasable()) { return 0; } Line::ErasePreviousLine(); ptsEnd = MAKEPOINTS(lParam); Line::DrawLine(new long(ptsBegin.x),new long(ptsBegin.y),new long(ptsEnd.x),new long(ptsEnd.y)); } break; case WM_LBUTTONUP: bIsCaptured = false; ReleaseCapture(); break; case WM_ACTIVATEAPP: { if(wParam == TRUE) { if(bIsCaptured){ SetCapture(hwnd);} } } break; } return 0; }

  Read the article

• Data Source Security Part 1

  - by Steve Felts

  I’ve written a couple of articles on how to store data source security credentials using the Oracle wallet.  I plan to write a few articles on the various types of security available to WebLogic Server (WLS) data sources.  There are more options than you might think! There have been several enhancements in this area in WLS 10.3.6.  There are a couple of more enhancements planned for release WLS 12.1.2 that I will include here for completeness.  This isn’t intended as a teaser.  If you call your Oracle support person, you can get them now as minor patches to WLS 10.3.6.   The current security documentation is scattered in a few places, has a few incorrect statements, and is missing a few topics.  It also seems that the knowledge of how to apply some of these features isn’t written down.  The goal of these articles is to talk about WLS data source security in a unified way and to introduce some approaches to using the available features.  Introduction to WebLogic Data Source Security Options By default, you define a single database user and password for a data source.  You can store it in the data source descriptor or make use of the Oracle wallet.  This is a very simple and efficient approach to security.  All of the connections in the connection pool are owned by this user and there is no special processing when a connection is given out.  That is, it’s a homogeneous connection pool and any request can get any connection from a security perspective (there are other aspects like affinity).  Regardless of the end user of the application, all connections in the pool use the same security credentials to access the DBMS.   No additional information is needed when you get a connection because it’s all available from the data source descriptor (or wallet). java.sql.Connection conn =  mydatasource.getConnection(); Note: You can enter the password as a name-value pair in the Properties field (this not permitted for production environments) or you can enter it in the Password field of the data source descriptor. The value in the Password field overrides any password value defined in the Properties passed to the JDBC Driver when creating physical database connections. It is recommended that you use the Password attribute in place of the password property in the properties string because the Password value is encrypted in the configuration file (stored as the password-encrypted attribute in the jdbc-driver-params tag in the module file) and is hidden in the administration console.  The Properties and Password fields are located on the administration console Data Source creation wizard or Data Source Configuration tab. The JDBC API can also be used to programmatically specify a database user name and password as in the following.  java.sql.Connection conn = mydatasource.getConnection(“user”, “password”); According to the JDBC specification, it’s supposed to take a database user and associated password but different vendors implement this differently.  WLS, by default, treats this as an application server user and password.  The pair is authenticated to see if it’s a valid user and that user is used for WLS security permission checks.  By default, the user is then mapped to a database user and password using the data source credential mapper, so this API sort of follows the specification but database credentials are one-step removed from the application code.  More details and the rationale are described later. While the default approach is simple, it does mean that only one database user is doing all of the work.  You can’t figure out who actually did the update and you can’t restrict SQL operations by who is running the operation, at least at the database level.   Any type of per-user logic will need to be in the application code instead of having the database do it.  There are various WLS data source features that can be configured to provide some per-user information about the operations to the database. WebLogic Data Source Security Options This table describes the features available for WebLogic data sources to configure database security credentials and a brief description.  It also captures information about the compatibility of these features with one another. Feature Description Can be used with Can’t be used with User authentication (default) Default getConnection(user, password) behavior – validate the input and use the user/password in the descriptor. Set client identifier Proxy Session, Identity pooling, Use database credentials Use database credentials Instead of using the credential mapper, use the supplied user and password directly. Set client identifier, Proxy session, Identity pooling User authentication, Multi Data Source Set Client Identifier Set a client identifier property associated with the connection (Oracle and DB2 only). Everything Proxy Session Set a light-weight proxy user associated with the connection (Oracle-only). Set client identifier, Use database credentials Identity pooling, User authentication Identity pooling Heterogeneous pool of connections owned by specified users. Set client identifier, Use database credentials Proxy session, User authentication, Labeling, Multi-datasource, Active GridLink Note that all of these features are available with both XA and non-XA drivers. Currently, the Proxy Session and Use Database Credentials options are on the Oracle tab of the Data Source Configuration tab of the administration console (even though the Use Database Credentials feature is not just for Oracle databases – oops).  The rest of the features are on the Identity tab of the Data Source Configuration tab in the administration console (plan on seeing them all in one place in the future). The subsequent articles will describe these features in more detail.  Keep referring back to this table to see the big picture.

  Read the article

• Is it feasible and useful to auto-generate some code of unit tests?

  - by skiwi

  Earlier today I have come up with an idea, based upon a particular real use case, which I would want to have checked for feasability and usefulness. This question will feature a fair chunk of Java code, but can be applied to all languages running inside a VM, and maybe even outside. While there is real code, it uses nothing language-specific, so please read it mostly as pseudo code. The idea Make unit testing less cumbersome by adding in some ways to autogenerate code based on human interaction with the codebase. I understand this goes against the principle of TDD, but I don't think anyone ever proved that doing TDD is better over first creating code and then immediatly therafter the tests. This may even be adapted to be fit into TDD, but that is not my current goal. To show how it is intended to be used, I'll copy one of my classes here, for which I need to make unit tests. public class PutMonsterOnFieldAction implements PlayerAction { private final int handCardIndex; private final int fieldMonsterIndex; public PutMonsterOnFieldAction(final int handCardIndex, final int fieldMonsterIndex) { this.handCardIndex = Arguments.requirePositiveOrZero(handCardIndex, "handCardIndex"); this.fieldMonsterIndex = Arguments.requirePositiveOrZero(fieldMonsterIndex, "fieldCardIndex"); } @Override public boolean isActionAllowed(final Player player) { Objects.requireNonNull(player, "player"); Hand hand = player.getHand(); Field field = player.getField(); if (handCardIndex >= hand.getCapacity()) { return false; } if (fieldMonsterIndex >= field.getMonsterCapacity()) { return false; } if (field.hasMonster(fieldMonsterIndex)) { return false; } if (!(hand.get(handCardIndex) instanceof MonsterCard)) { return false; } return true; } @Override public void performAction(final Player player) { Objects.requireNonNull(player); if (!isActionAllowed(player)) { throw new PlayerActionNotAllowedException(); } Hand hand = player.getHand(); Field field = player.getField(); field.setMonster(fieldMonsterIndex, (MonsterCard)hand.play(handCardIndex)); } } We can observe the need for the following tests: Constructor test with valid input Constructor test with invalid inputs isActionAllowed test with valid input isActionAllowed test with invalid inputs performAction test with valid input performAction test with invalid inputs My idea mainly focuses on the isActionAllowed test with invalid inputs. Writing these tests is not fun, you need to ensure a number of conditions and you check whether it really returns false, this can be extended to performAction, where an exception needs to be thrown in that case. The goal of my idea is to generate those tests, by indicating (through GUI of IDE hopefully) that you want to generate tests based on a specific branch. The implementation by example User clicks on "Generate code for branch if (handCardIndex >= hand.getCapacity())". Now the tool needs to find a case where that holds. (I haven't added the relevant code as that may clutter the post ultimately) To invalidate the branch, the tool needs to find a handCardIndex and hand.getCapacity() such that the condition >= holds. It needs to construct a Player with a Hand that has a capacity of at least 1. It notices that the capacity private int of Hand needs to be at least 1. It searches for ways to set it to 1. Fortunately it finds a constructor that takes the capacity as an argument. It uses 1 for this. Some more work needs to be done to succesfully construct a Player instance, involving the creation of objects that have constraints that can be seen by inspecting the source code. It has found the hand with the least capacity possible and is able to construct it. Now to invalidate the test it will need to set handCardIndex = 1. It constructs the test and asserts it to be false (the returned value of the branch) What does the tool need to work? In order to function properly, it will need the ability to scan through all source code (including JDK code) to figure out all constraints. Optionally this could be done through the javadoc, but that is not always used to indicate all constraints. It could also do some trial and error, but it pretty much stops if you cannot attach source code to compiled classes. Then it needs some basic knowledge of what the primitive types are, including arrays. And it needs to be able to construct some form of "modification trees". The tool knows that it needs to change a certain variable to a different value in order to get the correct testcase. Hence it will need to list all possible ways to change it, without using reflection obviously. What this tool will not replace is the need to create tailored unit tests that tests all kinds of conditions when a certain method actually works. It is purely to be used to test methods when they invalidate constraints. My questions: Is creating such a tool feasible? Would it ever work, or are there some obvious problems? Would such a tool be useful? Is it even useful to automatically generate these testcases at all? Could it be extended to do even more useful things? Does, by chance, such a project already exist and would I be reinventing the wheel? If not proven useful, but still possible to make such thing, I will still consider it for fun. If it's considered useful, then I might make an open source project for it depending on the time. For people searching more background information about the used Player and Hand classes in my example, please refer to this repository. At the time of writing the PutMonsterOnFieldAction has not been uploaded to the repo yet, but this will be done once I'm done with the unit tests.

  Read the article

• Deep Cloning C++ class that inherits CCNode in Cocos2dx

  - by A Devanney

  I stuck with something in Cocos2dx ... I'm trying to deep clone one of my classes that inherits CCNode. Basically i have.... GameItem* pTemp = new GameItem(*_actualItem); // loops through all the blocks in gameitem and updates their position pTemp->moveDown(); // if in boundary or collision etc... if (_gameBoard->isValidMove(pTemp)) { _actualItem = pTemp; // display the position CCLog("pos (1) --- (X : %d,Y : %d)", _actualItem->getGridX(),_actualItem->getGridY()); } Then doesn't work, because the gameitem inherits CCNode and has the collection of another class that also inherits CCNode. its just creating a shallow copy and when you look at children of the gameitem node in the copy, just point to the original? class GameItem : public CCNode { // maps to the actual grid position of the shape CCPoint* _rawPosition; // tracks the current grid position int _gridX, _gridY; // tracks the change if the item has moved CCPoint _offset; public: //constructors GameItem& operator=(const GameItem& item); GameItem(Shape shape); ... } then in the implementation.... GameItem& GameItem::operator=(const GameItem& item) { _gridX = item.getGridX(); _gridY = item.getGridY(); _offset = item.getOffSet(); _rawPosition = item.getRawPosition(); // how do i copy the node? return *this; } // shape contains an array of position for the game character GameItem::GameItem(Shape shape) { _rawPosition = shape.getShapePositions(); //loop through all blocks in position for (int i = 0; i < 7; i++) { // get the position of the first block in the shape and add to the position of the first block int x = (int) (getRawPosition()[i].x + getGridX()); int y = (int) (getRawPosition()[i].y + getGridY()); //instantiate a block with the position and type Block* block = Block::blockWithFile(x,y,(i+1), shape); // add the block to the this node this->addChild(block); } } And for clarity here is the block class class Block : public CCNode{ private: // using composition over inheritance CCSprite* _sprite; // tracks the current grid position int _gridX, _gridY; // used to store actual image number int _blockNo; public: Block(void); Block(int gridX, int gridY, int blockNo); Block& operator=(const Block& block); // static constructor for the creation of a block static Block* blockWithFile(int gridX, int gridY,int blockNo, Shape shape); ... } The blocks implementation..... Block& Block::operator=(const Block& block) { _sprite = new CCSprite(*block._sprite); _gridX = block._gridX; _gridY = block._gridY; _blockNo = block._blockNo; //again how to clone CCNode? return *this; } Block* Block::blockWithFile(int gridX, int gridY,int blockNo, Shape shape) { Block* block = new Block(); if (block && block->initBlockWithFile(gridX, gridY,blockNo, shape)) { block->autorelease(); return block; } CC_SAFE_DELETE(block); return NULL; } bool Block::initBlockWithFile(int gridX, int gridY,int blockNo, Shape shape) { setGridX(gridX); setGridY(gridY); setBlockNo(blockNo); const char* characterImg = helperFunctions::Format(shape.getFileName(),blockNo); // add to the spritesheet CCTexture2D* gameArtTexture = CCTextureCache::sharedTextureCache()->addImage("Character.pvr.ccz"); CCSpriteBatchNode::createWithTexture(gameArtTexture); // block settings _sprite = CCSprite::createWithSpriteFrameName(characterImg); // set the position of the block and add it to the layer this->setPosition(CONVERTGRIDTOACTUALPOS_X_Y(gridX,gridY)); this->addChild(_sprite); return true; } Any ideas are welcome at this point!! thanks

  Read the article

< Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >