Search Results

Search found 4886 results on 196 pages for 'geeks on hugs'.

Page 142/196 | < Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >

  • SQL Azure Security: DoS Part II

    - by Herve Roggero
    Ah!  When you shoot yourself in the foot... a few times... it hurts! That's what I did on Sunday, to learn more about the behavior of the SQL Azure Denial Of Service prevention feature. This article is a short follow up to my last post on this feature. In this post, I will outline some of the lessons learned that were the result of testing the behavior of SQL Azure from two machines. From the standpoint of SQL Azure, they look like one machine since they are behind a NAT. All logins affected The first thing to note is that all the logins are affected. If you lock yourself out to a specific database, none of the logins will work on that database. In fact the database size becomes "--" in the SQL Azure Portal.   Less than 100 sessions I was able to see 50+ sessions being made in SQL Azure (by looking at sys.dm_exec_sessions) before being locked out. The the DoS feature appears to be triggered in part by the number of open sessions. I could not determine if the lockout is triggered by the speed at which connection requests are made however.   Other Databases Unaffected This was interesting... the DoS feature works at the database level. Other databases were available for me to use.   Just Wait Initially I thought that going through SQL Azure and connecting from there would reset the database and allow me to connect again. Unfortunately this doesn't seem to be the case. You will have to wait. And the more you lock yourself out, the more you will have to wait... The first time the database became available again within 30 seconds or so; the second time within 2-3 minutes and the third time... within 2-3 hours...   Successful Logins The DoS feature appears to engage only for valid logins. If you have a login failure, it doesn't seem to count. I ran a test with over 100 login failures without being locked.

    Read the article

  • MvcReportViewer v.0.4.0 is available!

    - by Ilya Verbitskiy
    Originally posted on: http://geekswithblogs.net/ilich/archive/2014/06/04/mvcreportviewer-v.0.4.0-is-available.aspxToday I released new version of MvcReportViewer. This release contains mostly bug fixes reported by library users. I am glad to see that Open Source model works and people try to contribute to the project! Thank you everybody for your bug repots and help with the project. Version 0.4.0 Added support for ASP.NET MVC 5 Removed jQuery dependency. I have not tested it on IE8 or earlier versions. Any help with testing is welcome! Fixed problem with SSRS keep-alive cookies. Keep-alive cookies are issued every time a report is opened during a browser session. Many people don't restart their browsers and in my case, Chrome doesn't get rid of the cookie session data on close - had to manually delete them for the reports to start working again. I added KeepSessionAlive control settings to manage SSRS keep-alive behavior. It is set to false by default to fix Bad Request 400: Request Too Long issue. You can find usage example in Fluent.cshtml. Fixed the bug when ReportViewer Control parameters was not parsed when ShowParameterPrompts parameter had not been set. Changed public static MvcReportViewerIframe MvcReportViewer method to use IEnumerable<KeyValuePair<string, object>> reportParameters instead of simple object. The reason is users reported that they mostly use multiple report parameters’ values. Added support for SSRS hosted on Windows Azure. Users should set MvcReportViewer.IsAzureSSRS property to true in Web.config to use Windows Azure authentication. I do not have Windows Azure SSRS and build the code using http://msdn.microsoft.com/en-us/library/gg552871.aspx#Authentication article. It would be nice if somebody from community tested the change or provided me a test report on Windows Azure for testing purposes.

    Read the article

  • Retrieve .Net Control ID in Javascript

    - by Vipin
    Originally posted on: http://geekswithblogs.net/Vipin/archive/2013/07/24/retrieve-.net-control-id-in-javascript.aspxIf you need to retrieve a client ID of an asp:net control in a javascript function, then you can use the below function - function $$(id, context) { var el = $("#" + id, context); if (el.length < 1) el = $("[id$=_" + id + "]", context); return el; }   var tempDotNetControl = 'aspTextTemporary';   var ClientSideID = $$(aspTextTemporary); Please bear in mind, this function is useful if you want to retrieve client ID of a different DotNet control based on some condition, otherwise if it’s always static then you can just use <%= aspTextTemporary.ClientID %>"

    Read the article

  • Releasing the new Sample Browser Phone app

    - by Jialiang
    Originally posted on: http://geekswithblogs.net/Jialiang/archive/2014/06/05/releasing-the-new-sample-browser-phone-app.aspx Starting its journey in 2010, Sample Browser is achieving its tetralogy by releasing a Windows Phone version Sample Browser today. The new Windows Phone app is the fourth milestone of Sample Browser since we released the desktop version and the Visual Studio version in 2012 and the Windows Store version in 2013. This time, by providing a sample browser designed for a ‘walking’ platform in response to MVPs’ suggestions during last year’s MVP Global Summit, we are literally putting a world of code samples "at developers’ fingertips”. If you like to have a code gallery of over 7000 quality code samples in your pocket, then click here to download our Windows Phone Sample Browser and start a fantastic mobile experience. With Windows Phone version Sample Browser and the Internet, you can search for code samples on MSDN at anytime and anywhere you want, 24/7 and–even to bed. You can also check code sample details and share them with your friends. Compared to the other 3 pieces in the tetralogy (desktop version, Visual Studio version, and the Windows Store version), the Windows Phone version Sample Browser sells itself for convenience and instant connectivity. For those who need to reach code samples under mobile circumstances where no PCs is available, Windows Phone version Sample Browser will definitely be the right service you are seeking for. Aside from sharing samples via emails as the other 3 do, the Windows Phone version Sample Browser also allows you to share the sample via SMS and Near Field Communication (NFC).   What's Next Currently, the Windows Phone Sample Browser only supports online MSDN code searching, but we already plan to upgrade Sample Browser to allow users to do ‘Bing code search’, and add and manage their private code snippets.  We will also upgrade the app to universal app. Universal App is a new concept brought up in the Microsoft Build Developer Conference 2014. It is a new development model that allows for a single app to be deployed across multiple Windows devices such as Windows Phone, Windows 8.1, and XBox. Therefore, once we finish upgrading Sample Browser to a universal app, you can synchronize your own code snippets across different devices; You can also mark a code sample as favorite on your Windows Phone and continue to study the sample when you are on your desktop. By then, sharing data between platforms will be a piece of cake. Also, the user experience of Sample Browser on different platforms will be more consistent.  The best is yet to come!   We sincerely suggest you give Sample Browser a try (click here to download). If you love what you see in Sample Browser, please recommend it to your friends and colleagues. If you encounter any problems or have any suggestions for us, please contact us at [email protected]. Your precious opinions and comments are more than welcome.

    Read the article

  • IIM Calcutta &ndash; EPBM14 &ndash; Campus Visit &ndash; Day 3 &ndash; Kali Temple, IS &amp; Strateg

    - by Ram Shankar Yadav
    Hey folks~ Today was one of the most happening day for us, we got up @ 5 AM and did our daily morning chores and left hostel room by 5:35 AM. So why we got up so early??? Okay we planned a visit to Kali Temple at KaliGhat! So till everyone assembles, we took few pics on the Lake Deck. We left Joka campus at 6 AM and reached Kali temple at 6:50 AM. Kali temple is very famous in Kolkata, but the frankly speaking it’s one of the most unorganised one for sure~! After darshan, we got back into our Taxis and headed for breakfast at Gupta Brothers Restaurant. We enjoyed “doodh-jalebi”, “Kachori-sabzi” and rasogullas there~! While coming back, one of our Taxi’s excel broken and we waited for the first to come back and take us to Campus. After coming back to campus, we attended our sessions on IS & Strategy on ITC eChaupal and Transactional Cost and Vertical Integration(TCVI). After our classed we had “Dinner Party” organised by IIMC, and we enjoyed it thoroughly, and many of us took this as an opportunity to share our biz card and talk to Professors. Overall it’s was a rocking day!! Stay tuned for more… Cheers, ram :)   Photo Album :

    Read the article

  • This is something new

    - by shmoolca
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} I have created GUI with lots of my own controls. This control has style as a resource inside control resources. My performance profiler shows that InitializeComponent of this control is 7.5 times longer than control that has defined style in resources of application. It occurs because constructor is loading whole BAML each time constructor is called. Sounds logical for me :)

    Read the article

  • Exchange 2010, Exchange 2003 Mail Flow issue

    - by Ryan Roussel
    While performing the initial Exchange 2010 deployment for a customer migrating from Exchange 2003, I ran into an issue with mail flow between the two environments.  The Exchange 2003 mailboxes could send to Exchange 2010, as well as to and from the internet.  Exchange 2010 mailboxes could send and receive to the internet, however they could not send to Exchange 2003 mailboxes.   After scouring the internet for a solution, it seemed quite a few people were experiencing this issue with no resolution to be found, or at least not easily.  After many attempts of manually deleting and recreating the routing group connectors,  I finally lucked onto the answer in an obscure comment left to another blogger.   If inheritable permissions are not allowed on the Exchange 2003 object in the Active Directory schema, exchange server authentication cannot be achieved between the servers.   It seems when Blackberry Enterprise Server gets added to 2003 environments, a lot of Admins get tricky and add the BES Admin user explicitly to the server object  to allow  inheritance down from there to all mailboxes.  The problem is they also coincidently turn off inheritance to the server object itself from its parent containers.  You can re-establish inheritance without overwriting the existing ACL however so that the BES Admin can remain in the server object ACL.   By re-establishing inheritance to the 2003 server object, mail flow was instantly restored between the servers.    To re-establish inheritance: 1. Open ASDIedit by adding the snap-in to a MMC (should be included on your 2008 server where Exchange 2010 is installed) 2. Navigate to Configuration > Services > Microsoft Exchange > Exchange Organization > Administrative Groups > First Administrative Group > Servers 3. In the right pane, right click on the CN=Server Name of your Exchange 2003 Server, select properties 4. Navigate to the Security tab, hit advanced toward the bottom. 5. Check the checkbox that reads “include inheritable permissions” toward the bottom of the dialogue box.

    Read the article

  • OData &ndash; The easiest service I can create

    - by Jon Dalberg
    I wanted to create an OData service with the least amount of code so I fired up Visual Studio and got cracking. I decided to serve up a list of naughty words and make them read-only. Create a new web project. I created an empty MVC 2 application but MVC is not required for OData. Add a new WCF Data Service to the project. I named mine NastyWords.svc since I’m serving up a list of nasty words. Add a class to expose via the service: NastyWord 1: [DataServiceKey("Word")] 2: public class NastyWord 3: { 4: public string Word { get; set; } 5: }   I need to be able to uniquely identify instances of NastyWords for the DataService so I used the DataServiceKey attribute with the “Word” property as the key. I could have added an “ID” property which would have uniquely identified them and would then not need the “DataServiceKey” attribute because the DataService would apply some reflection and heuristics to guess at which property would be the unique identifier. However, the words themselves are unique so adding an “ID” property would be redundantly repetitive. Then I created a data source to expose my NastyWord objects to the service. This is just a simple class with IQueryable<T> properties exposing the entities for my service: 1: public class NastyWordsDataSource 2: { 3: private static IList<NastyWord> words = new List<NastyWord> 4: { 5: new NastyWord{ Word="crap"}, 6: new NastyWord{ Word="darn"}, 7: new NastyWord{ Word="hell"}, 8: new NastyWord{ Word="shucks"} 9: }; 10:   11: public NastyWordsDataSource() 12: { 13: NastyWords = words.AsQueryable(); 14: } 15:   16: public IQueryable<NastyWord> NastyWords { get; private set; } 17: }   Now I can go to the NastyWords.svc class and tell it which data source to use and which entities to expose: 1: public class NastyWords : DataService<NastyWordsDataSource> 2: { 3: // This method is called only once to initialize service-wide policies. 4: public static void InitializeService(DataServiceConfiguration config) 5: { 6: config.SetEntitySetAccessRule("*", EntitySetRights.AllRead); 7: config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; 8: } 9: }   Compile and browse to my NastWords.svc and weep with joy Now I can query my service just like any other OData service. Next time, I’ll modify this service to allow updates to sent so I can build up my list of nasty words. Enjoy!

    Read the article

  • Validate that a Checkbox is checked using javascript

    - by H(at)Ni
    I was facing a challenge yesterday that I was creating a Visual webpart and I wanted to validate the a submit button is only visible if the user checked a "I agree to terms" checkbox. Something was weired that I tested my code on a normal asp.net website and it worked perfectly while it had a different behaviour inside the webpart which is whenever I check the checkbox, the button is enabled but it will not fire the asp.net validators in client side. It posts back the page and then the validators appear after that. So, I tried to change my type of thinking and I reached a different solution is that to call a javascript function whenever the button is clicked and then check if the checkbox is clicked or not. To illustrate more, here are an example to what I'm saying: 1. Button in aspx page: <asp:Button OnClientClick="CheckForCondition();"  ValidationGroup="CompaniesSection" ID="btnCompaniesSubmit"                         runat="server" Text="Submit" /> 2. CheckForCondition() function: <script language="javascript" type="text/javascript">                         function CheckForCondition() {                             if ($jq('#<%= ChkCompanyCheck.ClientID %>:checked').val() == undefined) {                                 $jq('#lblCheckBox').show();                                 return false;                             }                             else {                                 $jq('#lblCheckBox').hide();                                 return true;                             }                         }                      </script> 3. lblCheckBox is simply a label that shows a red asterisk beside the checkbox to indicate that it's a required field. <label id="lblCheckBox" style="color:Red;display:none">*</label>

    Read the article

  • Perspective Is Everything

    - by juanlarios
    Sitting on a window seat on my way back from Seattle I looked out the window and saw the large body of water. I was reminded of childhood memories of running as hard as I could through burning hot sand with the anticipation of the splash of the ocean. Looking out the window the water appeared like a sheet draped over land. I couldn’t help but ponder how perspective changes everything.  Over the last several days I had a chance to attend the MVP Summit in Redmond. I had a great time with fellow MVP’s and the SharePoint Product Group. Although I can’t say much about what was discussed and what is coming in the future, I want to share some realizations I had while experiencing the MVP summit.  The SharePoint Product is ever-improving, full of innovation but also a reactionary embodiment of MVP, client and market feedback. There are several features that come to mind that clients complain about where I have felt helpless in informing them that the features are not as mature as they would like it. Together, we figure out a way to make it work and deal with the limitations. It became clear that there are features that have taken a different purpose in the market place from the original vision. The SP Product group is working hard to react to these changes in vision and make SharePoint better for real life implementations.  It is easy to think that SharePoint should be all things to all people. In reality there are products that are very detailed in specific composites, they do this one thing well but severely lack in other areas.  Its easy sometimes to say, “What was Microsoft thinking with this feature?” the Product group is doing all they can to make the moving pieces better and dealing with challenges with having all of them work together.  Sometimes the features don’t fully embody the vision because of the many challenges, but trust me when I say the product group is really focused on delivery and innovation.  As I was speaking with a fellow MVP throughout the session, we spoke about the iPad 2(ironically announced this past week during the MVP summit) and Microsoft’s possible product answer; I realized the days of reactionary products from MS is over. There are many users that will remember Vista and the painful execution in that product, but there has been a lot of success in Windows 7. There was no rush for a reactionary answer to the Nintendo Wii, as a result a ground breaking and game changing product was brought to market, the XBOX –Kinect! I can’t say much here, but it’s safe to say, expect innovation, and execution of products and technology that will change the market instead of react to them!       There are many things I learned and I would love to share that have to do with perspective, technology, etc… but this is far as I can go in details. This might not be new to you or specifically the message that was shared during the summit. These are just my impressions of the event and the spirit of future vision. Great things ahead!

    Read the article

  • [EF + Oracle] Intro

    - by JTorrecilla
    Prologue I have a busy personal and working time, and at this moment that I start to get more free time, I decided to start a Serie about Entity Framework with Oracle. A few time ago, I got my first experience with EF and Oracle with Oracle 10 g express and Oracle 10 g with the same results, Doesn’t work. Now I download Oracle 11 g to Test again. Tools To start using EF with Oracle we need the following: 1. Visual Studio 2010. No Express Edition 2. Oracle 11g 3 Oracle Driver for EF (ODAC) Intro People, who are starting with EF developments, I recommend to take a look into Unai Zorrilla’s Blog, the post were written in Spanish but they are great! To this Serie, we are going to define the DB from the Oracle administrator. For that we need to follow the next steps: 1. Create a User with a PassWord. In my example the user will be Jtorrecilla 2. Create a TableSpace 3. Define some example tables   (Image1) When we have created the DB, we are going to start a new project in VS 2010. I will start a C# Project. To start with EF, we need to add a new objet to our Project “ADO .NET Entity Data Model". (Image2) The next step will be to indicate that our model will be based on an existing DB, and indicate the connection string (Images 3 and 4): (Imagen3) (Imagen4) Once we selected the connection string, we will need to indicate that in the connection will be saved “Sensitive” data (Image 5), and in the next step we are going to select the DB objets to use in the project(Image 6).   (Image 5) (Image 6) A the end of the selection, we will press Finish button, and it will generate a EDMX file to add to our solution, and in the IDE will appear the DB Schema with the selected Tables and Relations. (Imagen7) One Entity is composed by a set of properties (each matches with a column from the Table in the DB) and Navigation Properties that represents any relation with other Entities.   Finally With this chapter we have installed the environment, defined a DB and configured the solution to start using EF with Oracle. In the next chapter we are going to see What is a Entity and how it works. I hope you enjoy this Serie!

    Read the article

  • BusEnum2 and a Minor Bug Fix

    - by Kate Moss' Open Space
    The default root bus driver, BusEnum, enumerate and active drivers one by one in synchronized manner. It is not only slowing the boot time but in the even if any of driver's init function (XXX_init) get hanged, the whole system won't boot at all. There is a sample of enhanced root bus driver, BusEnum2, on the http://msdn.microsoft.com/en-us/library/dd187254.aspx The page provides the sample code and the detail explanation of the design concept. With multi-threaded BusEnum2 on CE7 with SMP enabled system, the scalability is even more significant. Since you have more than one processor and it can load drivers in parallel! Everything looks good so far, except to there is a small bug in the sample code. Fortunately, it is easy to fix. But hard to trace if you ever enc outer it! The BUSENUM2 flag only defined in BUSENUM2\BUSDEF\sources but not in BUSENUM2\BUSENUM\sources. The DeviceFolder is implemented in BUSENUM2\BUSDEF but the instance is created in BUSENUM2\BUSENUM\busenum.cpp, so the result is it allocates less memory than actual need.   Add   CDEFINES=$(CDEFINES) -DBUSENUM2   into BUSENUM2\BUSENUM\sources and the problem fixed!

    Read the article

  • Entity Framework: Connecting to a mdf user database file via localDB during script execution

    - by Marko Apfel
    Problem If you run the “Generate database from model” wizard and execute the generated script the destination database could be the wrong one (for instance master of the SQL Server). Solution To use an own mdf attachable user database some connection information must specified during script execution. Execute your script opens the dialog “Connect to Server”. Press “Options” and go to the second tab “Connection Properties”. Select “Browse server” in the “Connect to database” dropdown box: Confirm the information dialog with “Yes”. In the following dialog you could choose your user database. Now the schema is created in the user database.

    Read the article

  • Build 2012, the first post

    - by Dennis Vroegop
    Yes, I was one of the lucky few who made it to Build. Build, formerly known as the Professional Developers Conference (or PDC) is the place to be if you are a developer on the Microsoft platform. Since I take my job seriously I took out some time on my busy schedule, sighed at the thought of not seeing my family for another week and signed up for it. Now, before I talk about the amazing Surface devices (yes, this posting is written on one of them), the great Lumia 920 we all got, the long deserved love for touch, NUI and other things I have been talking about for years, I need to do some ranting. So if you are anxious to read about the technical goodies you’ll have to wait until the next post. Still here? Good. When I signed up for the Build conference during my holidays this summer it was pretty obvious that demand would be high. Therefor I made sure I was on time. But even though I registered only 7 minutes after the initial opening time the Early Bird discount for the first 500 attendees was already sold out. I later learned that registration actually started 5 minutes before the scheduled time but even though it is still impressive how fast things went. The whole event sold out in 57 minutes Or so they say… A lot of people got put on the waiting list. There was room for about 1500 attendees and I heard that at least 1000 people were on that waiting list, including a lot of people I know. Strangely, all of them got tickets assigned after 2 weeks. Here at the conference I heard from a guy from Nokia that they had shipped 2500 Lumia 920 phones. That number matches the rumors that the organization added 1000 extra tickets. This, of course is no problem. I am not an elitist and I think large crowds have a special atmosphere that I quite like. But…. The Microsoft Campus is not equipped for that sheer volume of visitors. That was painfully obvious during on-site registration where people had to stand in line for over 2 hours. The conference is spread out over 2 buildings, divided by a 15 minute busride (yes, the campus is that big). I have seen queues of over 200 people waiting for the bus and when that arrived it had a capacity of 16. I can assure you: that doesn’t fit. This of course means that travelling from one site to the other might take about 30 minutes. So you arrive at the session room just in time, only to find out it’s full. Since you can’ get into that session you try to find another one but now you’re even more late so you have no chance at all of entering. The doors are closed and you’re told: “Well, you can watch the live stream online”. Mmmm… So I spend thousands of dollars, a week away from home, family and work to be told I can also watch the sessions online? Are you fricking kidding me? I could go on but I won’t. You get the idea. It’s jus badly organized, something I am not really used to in my 20 years of experience at Microsoft events. Yes, I am disappointed. I hope a lot of people here in Redmond will also fill in the evals and that the organization next year will do a better job. Really, Build deserves better. </rantmode>

    Read the article

  • Navigation in Win8 Metro Style applications

    - by Dennis Vroegop
    In Windows 8, Touch is, as they say, a first class citizen. Now, to be honest: they also said that in Windows 7. However in Win8 this is actually true. Applications are meant to be used by touch. Yes, you can still use mouse, keyboard and pen and your apps should take that into account but touch is where you should focus on initially. Will all users have touch enabled devices? No, not in the first place. I don’t think touchscreens will be on every device sold next year. But in 5 years? Who knows? Don’t forget: if your app is successful it will be around for a long time and by that time touchscreens will be everywhere. Another reason to embrace touch is that it’s easier to develop a touch-oriented app and then to make sure that keyboard, nouse and pen work as doing it the other way around. Porting a mouse-based application to a touch based application almost never works. The reverse gives you much more chances for success. That being said, there are some things that you need to think about. Most people have more than one finger, while most users only use one mouse at the time. Still, most touch-developers translate their mouse-knowledge to the touch and think they did a good job. Martin Tirion from Microsoft said that since Touch is a new language people face the same challenges they do when learning a new real spoken language. The first thing people try when learning a new language is simply replace the words in their native language to the newly learned words. At first they don’t care about grammar. To a native speaker of that other language this sounds all wrong but they still will be able to understand what the intention was. If you don’t believe me: try Google translate to translate something for you from your language to another and then back and see what happens. The same thing happens with Touch. Most developers translate a mouse-click into a tap-event and think they’re done. Well matey, you’re not done. Not by far. There are things you can do with a mouse that you cannot do with touch. Think hover. A mouse has the ability to ‘slide’ over UI elements. Touch doesn’t (I know: with Pen you can do this but I’m talking about actual fingers here). A touch is either there or it isn’t. And right-click? Forget about it. A click is a click.  Yes, you have more than one finger but the machine doesn’t know which finger you use… The other way around is also true. Like I said: most users only have one mouse but they are likely to have more than one finger. So how do we take that into account? Thinking about this is really worth the time: you might come up with some surprisingly good ideas! Still: don’t forget that not every user has touch-enabled hardware so make sure your app is useable for both groups. Keep this in mind: we’re going to need it later on! Now. Apps should be easy to use. You don’t want your user to read through pages and pages of documentation before they can use the app. Imagine that spotter next to an airfield suddenly seeing a prototype of a Concorde 2 landing on the nearby runway. He probably wants to enter that information in our app NOW and not after he’s taken a 3 day course. Even if he still has to download the app, install it for the first time and then run it he should be on his way immediately. At least, fast enough to note down the details of that unique, rare and possibly exciting sighting he just did. So.. How do we do this? Well, I am not talking about games here. Games are in a league of their own. They fall outside the scope of the apps I am describing. But all the others can roughly be characterized as being one of two flavors: the navigation is either flat or hierarchical. That’s it. And if it’s hierarchical it’s no more than three levels deep. Not more. Your users will get lost otherwise and we don’t want that. Flat is simple. Just imagine we have one screen that is as high as our physical screen is and as wide as you need it to be. Don’t worry if it doesn’t fit on the screen: people can scroll to the right and left. Don’t combine up/down and left/right scrolling: it’s confusing. Next to that, since most users will hold their device in landscape mode it’s very natural to scroll horizontal. So let’s use that when we have a flat model. The same applies to the hierarchical model. Try to have at most three levels. If you need more space, find a way to group the items in such a way that you can fit it in three, very wide lanes. At the highest level we have the so called hub level. This is the entry point of the app and as such it should give the user an immediate feeling of what the app is all about. If your app has categories if items then you might show these categories here. And while you’re at it: also show 2 or 3 of the items itself here to give the user a taste of what lies beneath. If the user selects a category you go to the section part. Here you show several sections (again, go as wide as you need) with again some detail examples. After that: the details layer shows each item. By giving some samples of the underlaying layer you achieve several things: you make the layer attractive by showing several different things, you show some highlights so the user sees actual content and you provide a shortcut to the layers underneath. The image below is borrowed from the http://design.windows.com website which has tons and tons of examples: For our app we’ll use this layout. So what will we show? Well, let’s see what sorts of features our app has to offer. I’ll repeat them here: Note planes Add pictures of that plane Notify friends of new spots Share new spots on social media Write down arrival times Write down departure times Write down the runway they take I am sure you can think of some more items but for now we'll use these. In the hub we’ll show something that represents “Spots”, “Friends”, “Social”. Apparently we have an inner list of spotter-friends that are in the app, while we also have to whole world in social. In the layer below we show something else, depending on what the user choose. When they choose “Spots” we’ll display the last spots, last spots by our friends (so we can actually jump from this category to the one next to it) and so on. When they choose a “spot” (or press the + icon in the App bar, which I’ll talk about next time) they go to the lowest and final level that shows details about that spot, including a picture, date and time and the notes belonging to that entry. You’d be amazed at how easy it is to organize your app this way. If you don’t have enough room in these three layers you probably could easily get away with grouping items. Take a look at our hub: we have three completely different things in one place. If you still can’t fit it all in in a logical and consistent way, chances are you are trying to do too much in this app. Go back to your mission statement, determine if it is specific enough and if your feature list helps that statement or makes it unclear. Go ahead. Give it a go! Next time we’ll talk about the look and feel, the charms and the app-bar….

    Read the article

  • Could not load file or assembly 'System.Data.SQLite' or one of its dependencies. An attempt was made to load a program with an incorrect format.

    - by Om Talsania
    Problem Description: Could not load file or assembly 'System.Data.SQLite' or one of its dependencies. An attempt was made to load a program with an incorrect format. Likely to be reproduced when: You will usually encounter this problem when you have downloaded a sample application that is a 32-bit application targeted for ASP.NET 2.0 or 3.5, and you have IIS7 on a 64-bit OS running .NET 4.0, because the default setting for running 32-bit application on IIS7 with 64-bit OS is false. Resolution: 1. Go to IIS Management Console Start -> Administration Tools -> Internet Information Services (IIS) Manager 2. Expand your server in the left pane and go to Application Pools 3. Right click to select ‘Add Application Pool’  4. Create anew AppPool. I have named it ASP.NET v2.0 AppPool (32-bit) and selected .NET Framework v2.0.50727 because I intend to run my ASP.NET 3.5 application on it. 5. Now right click the newly created AppPool and select Advanced Settings 6. Change the property “Enable 32-Bit Applications” from False to True  7. Now select your actual web application from the left panel. Right click the web application, and go to Manage Application -> Advanced Settings  8. Change the Property “Application Pool” to your newly created AppPool.  And… the error is gone…

    Read the article

  • Two Copies of "Silverlight 5 In Action" to Give Away and a FREE chapter!

    - by Dave Campbell
    I know most of you have seen my post from Tuesday where I talked about giving away 2 copies of Pete's book on Monday morning July 18th. Well... I'm repeating it, because it's a smoking deal... for the cost of an email you too can take a shot at getting Pete's latest released "Silverlight 5 In Action" free. 2 Important Pieces of Information 1) The deadline: midnight Sunday night, July 17, 2012, Arizona time... if you know me, you know I've lived here too long and am timezone stupid... so don't make me calculate it out :) 2) The how: I have a special email address for submittals: mailto:[email protected]?Subject=Giveaway. 3) oh yeah... I lied about only 2 pieces of info... number 3 ... there may be other surprises on Monday morning... 'nuff said 4) and just to pump up the volume on the book... how about a Free chapter you can read right here on Working with RSS and Atom! 5) send me an email and Stay in the 'Light!

    Read the article

  • The remote server returned an error: 227 Entering Passive Mode

    - by hmloo
    Today while uploading file to FTP sever, the codes throw an error - "The remote server returned an error: 227 Entering Passive Mode", after research, I got some knowledge in FTP working principle. FTP may run in active or passive mode, which determines how the data connection is established. Active mode: command connection: client >1024  -> server 21 data connection:    client >1024  <-  server 20 passive mode: command connection: client > 1024 -> server 21 data connection:    client > 1024 <- server > 1024 In active mode, the client connects from a random unprivileged port (N > 1023) to the FTP server's command port(default port 21). If the client needs to transfer data, the client will use PORT command to tell the server:"hi, I opened port XXXX, please connect to me." and then server will use port 20 to initiate the data connection to that client port number. In passive mode, the client connects from a random unprivileged port (N > 1023) to the FTP server's command port(default port 21). If the client needs to transfer data, the sever will tell the client:"hi, I opened port XXXX , please connect to me." and then client will initiate the data connection to that sever port number. In a nutshell, active mode is used to have the server connect to the client, and passive mode is used to have the client connect to the server. So if your FTP server is configured to work in active mode only or the firewalls between your client and the server are blocking the data port range, then you will get error message, to fix this issue, just set System.Net.FtpWebRequest property UsePassive = false. Hope this helps! Thanks for reading!

    Read the article

  • Windows 8 App Downloads Increasing + Over 5,000 Apps Available

    - by David Paquette
    Windows 8 will be unleashed on the general public tomorrow and I thought it would be a good time to review some of the numbers I have been tracking over the last month. Downloads of Windows 8 Apps have been steadily increasing over the last month.  Below is screenshot from the App Summary page for my Windows 8 app.  The blue line is my app, while the orange line is average for the top 5 apps in that subcategory.  Considering the large gap between the 2, I think it is safe to assume that my app is NOT in the top 5 in the subcategory. The spike in the last couple of days is fairly dramatic and I am a little surprised by that.  I would have expected that kind of spike on the days following the official release as opposed to the days leading up to the release.   Finally, the all important App count.  There have been some stories floating around that the Window 8 Store is a ghost town and that there are no apps available.  I think these might be exaggerating the situation a little.  As of this morning, in the US store there are over 5000 apps available for download.  Obviously a far cry from the hundreds of thousands available in other app stores, but we are seeing solid growth in this number. Less than a month ago, that number was 2000. That means the store more than doubled in less than a month. If the growth continues, it won’t be long before the Widows 8 Store is filled with all the apps you need (and a whole lot you don’t need).

    Read the article

  • SharePoint 2013 Certifications - MCSE

    - by KunaalKapoor
    Microsoft Certified Solutions Expert (MCSE): SharePoint.Yes you read it right :) SharePoint 2013 Certifications are here... The two certifications mentioned below are expected to be published on February 05, 2013. And will count as credit to the new MCSE certificate. Exams Details:70-331 (Core Solutions of Microsoft SharePoint Server 2013)70-332 (Advanced Solutions of Microsoft SharePoint Server 2013)Classroom Trainings:Course 40028A: First Look Clinic: What’s New for IT Professionals in Microsoft SharePoint Server 2013Course 40027A: First Look Clinic: What’s New for Developers in Microsoft SharePoint 2013Time to prep... Next Stop MCSE...  :)

    Read the article

  • Monitoring Visual Studio 2010 Performance Problems

    - by TATWORTH
    At http://visualstudiogallery.msdn.microsoft.com/fa85b17d-3df2-49b1-bee6-71527ffef441, Microsoft have provided a tool for Visual Studio to provide reports on Visual Studio 2010 performance problems. The use of it has been discussed at http://blogs.msdn.com/b/visualstudio/archive/2011/05/02/perfwatson.aspx as follows: "Would you like Visual Studio 2010 to be even faster? Would you like any performance issue you see to be  reported automatically without any hassle? Well now you can, with the new Visual Studio PerfWatson extension! Install this extension and help us deliver a faster Visual Studio experience. We’re constantly working to improve the performance of Visual Studio and take feedback about it very seriously. Our investigations into these issues have found that there are a variety of scenarios where a long running task can cause the UI thread to hang or become unresponsive. Visual Studio PerfWatson is a low overhead telemetry system that helps us capture these instances of UI unresponsiveness and report them back to Microsoft automatically and anonymously. We then use this data to drive performance improvements that make Visual Studio faster." Now instead of complaining you too can help Microsoft locate and fix performance problems with Visual Studio 2010. The requirements are: "Following are the pre-requisites for installing Visual Studio PerfWatson: Windows Vista/2008/2008 R2/7 (Note: PerfWatson is not supported for Windows XP) Visual Studio 2010 SP1 (Professional, Premium, or Ultimate)"

    Read the article

  • Rules for Naming

    - by PointsToShare
    © 2011 By: Dov Trietsch. All rights reserved Naming Documents (or is it “Document, Naming”?) Tis but thy name that is my enemy; Thou art thyself, though not a Montague. What's Montague? It is nor hand, nor foot, Nor arm, nor face, nor any other part Belonging to a man. O, be some other name! What's in a name? That which we call a rose By any other name would smell as sweet; So Romeo would, were he not Romeo call'd, Retain that dear perfection which he owes Without that title. Romeo, doff thy name And for that name which is no part of thee Take all myself.  Shakespeare – Romeo and Juliet Act II, Scene 2 We normally only use the bold portion of the famous Shakespearean quote above, but it is really out of context. As the play unfolds, we learn that a name is all too powerful. Indeed it is because of their names that the doomed lovers die. There might be life and death in a name (BTW, when I wrote this monogram, I was in Hatfield, PA. Remember the Hatfields and the McCoys?) This is a bit extreme, but in the field of Knowledge Management (KM) names are of the utmost importance as well. When I write an article about managing SharePoint sites, how should I name it? “Managing a site” or “Site, managing”? Nine times out of ten I’d opt for the latter. Almost everything we do is “Managing” so to make life easier for a person looking for meaningful content, we title our articles starting with the differentiator rather than the common factor. As a rule of thumb, we start the name with the noun rather than the verb. It is not what we do that is the primary key; it is what we do it to. So, answer this – is it a “rule of thumb” or a “thumb rule?” This is tough. A lot of what we do when naming is a judgment call. Both thumb and rule are nouns, albeit concrete and abstract (more about this later), but to most people “thumb rule” is meaningless while “rule of thumb” is an idiom. The difference between knowledge and information is that knowledge is meaningful information placed in context. Thus I elect the “rule of thumb”. It is the more meaningful title. Abstract and Concrete are relative terms. Many nouns (and verbs) that are abstract to a commoner, are concrete to a practitioner of one profession or another and may even have different concrete meanings in different professional jargons. Think about “running”. To an executive it means running a business, to a marathoner its meaning is much more literal. Generally speaking, we store and disseminate knowledge within a practice more than we do it in general. Even dictionaries encyclopedias define terms as they apply to different audiences. The rule of thumb is to put the more concrete first, but within the audience’s jargon. Even the title of this monogram is a question. Do I name it “Naming Documents” or “Documents, Naming”? Well, my own rule of thumb (“Here he goes again!?”) states that the latter is better because it starts with a noun, but this is a document about naming more than it about documents. The rules of naming also apply to graphs and charts, excel spreadsheets, and so on. Thus, I vote for the former.  A better title could have been “Naming Objects” only the word “Object” is a bit too abstract. How about just “Naming” or “Naming, rules of”? You get the drift. One of the ways to resolve all of this is to store the documents in Knowledge-Bases, which may become the subjects of a future punditry. Knowledge bases use keywords to describe their content.  Use a Metadata store for the keywords to at least attempt some common grounds. Here is another general rule (rule of thumb?!!) – put at least the one keyword in the title. Use subtitles. Here is an example: Migrating documents – Screening, cleaning, and organizing our knowledge. The main keyword is “documents”, next is “migrating”, other keywords also appear in the subtitle. They are “screening”, “cleaning”, and “organizing”. Any questions? Send me an amply named document by email: [email protected]

    Read the article

  • How to save one role implementing a client/server pattern in Azure?

    - by Alfredo Delsors
    Sometimes you need to have an instance performing a server role when other instances are playing the client role. An example can be a file sharing like in this great post: http://blogs.msdn.com/b/mariok/archive/2011/02/11/sharing-folders-in-azure.aspx, one instance shares a folder that all other instances are using to write files that the server processes. The problem is that there is not discovering mechanism in Azure that allows one instance to know where the instance acting as a server is located. A first approach can be having a server role and a client role like in the previous post. This means more instances, more money. A solution to save this "server" role is to use Instance 0, always available, to act as a server. An instance can know that it should act as the server checking RoleEnvironment.CurrentRoleInstance.Id.EndsWith(".0"). Other instances can iterate the RoleEnvironment Instances collection to find the instance whose name ends with ".0", getting its endpoints and acting as its clients.

    Read the article

  • The Bing Sting - an alternative opinion

    - by Charles Young
    I know I'm a bit of an MS fanboy at times, but please, am I missing something here? Microsoft, with permission of users, exploits clickstream data gathered by observing user behaviour. One use for this data is to improve Bing queries. Google equips twenty of its engineers with laptops and installs the widgets required to provide Microsoft with clickstream data. It then gets their engineers to repeatedly (I assume) type in 'synthetic' queries which bring back 'doctored' hits. It asks its engineers to then click these results (think about this!). So, the behaviour of the engineers is observed and the resulting clickstream data goes off to Microsoft. It is processed and 'improves' Bing results accordingly.   What exactly did Microsoft do wrong here?   Google's so-called 'Bing sting' is clearly a very effective attack from a propaganda perspective, but is poor practice from a company that claims to do no evil. Generating and sending clickstream data deliberately so that you can then subsequently claim that your competitor 'copied' that data from you is neither fair nor reasonable, and suggests to me a degree of desperation in the face of real competition.   Monopolies are undesirable, whether they are Microsoft monopolies or Google monopolies.    Personally, I'm glad Microsoft has technology in place to observe user behaviour (with permission, of course) and improve their search results using such data. I can only assume Google doesn't implement similar capabilities. Sounds to me as if, at least in this respect, Microsoft may offer the better technology.

    Read the article

  • Configuring Team Foundation Server Basic on Home Server.

    - by Enrique Lima
    For the installation I selected only the Team Foundation Server role. Then, I opened the Team Foundation Server Administration Console (which I think is a great addition and improvement over the way TFS was configured in the past) to proceed with the configuration of the pieces. Once I selected the Configure Installed Features, the Configuration Center opened up. Now, the choices … In my implementation here I just want to take advantage of Source Control primarily.  I want to be able to store my code and projects.  So, Basic it is! So, the Basic Configuration Wizard opens up.  Now the options to configure are very limited, but we have to provide details for the SQL Server Instance. And now, to select Install SQL Server express.  If you want to take advantage of another system in your environment to host your database, well you could Use an existing SQL Server Instance. Once it has the details it needs, you get a Summary view to confirm your choices. Once, you click next or verify, it runs readiness checks on your system to make sure the installation will have a successful pass.  And we love GREEN! Now, since got the green flag, our next stop is to let the wizard do its magic, click on Configure.  And once again, we love GREEN! We click Next, and … We like a big Green Success sign … We close the Configuration Center … First results … Web Access …  Nothing to show … but we are there! And all this running from a Microsoft Home Server installation.

    Read the article

< Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >