Search Results

Search found 5171 results on 207 pages for 'whatever'.

Page 142/207 | < Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >

• Does image block (firefox addon) save internet bandwidth usage?

  - by dkjain

  Does image block save internet bandwidth usage. I have a data capped plan from my ISP ( 5GB at 2mbps and thereafter 256 kpbs / pm). I doubt if the addon or other similar addon actually saves bandwidht. Here is my point of view, pls correct if that is wrong. When a request is sent to the server, the server sends out whatever page it's requested to serve with all its text and images etc. So essentially my ISP has made his pipe available for the data to reach me thus he would count those bytes under my data plan. When the data arrives it's all first stored to my browser cache (folder) area which means all the data has actually been received by me/computer using my ISP's pipe. The browser then fetches those data from the cache and displays it. By hitting the stop button or blocking images via ur addon I am just choosing not to display the data which would remain in the cache or eventually be discarded if still on the network pipe after a timeout limit. The point is the data request have been completed by the ISP and so the data would be metered and thus using addon such as image block or hitting stop button while page is loading does not in any way save internet bandwidth. Your comments plz....... Regards dk.

  Read the article

• Same script, different behavior [migrated]

  - by Antoine_935

  I just stumbled upon an interesting bug... Still trying to figure out what is exactly happening. Maybe you can help. First, the context. I'm currently building yet another man to html converter (for some reasons I won't motivate here, but I need it). So, have a look at the screenshot below (see the link), more precisely at the outlined spots. See? On the upper shell, I have &lt ; and &gt ;, that is, escaped html. While on the shell below I have < and directly. But as you can see (or do I seriously need looking glass ?), the command man 2 semget | webmanneris the same on both sides, as is the which webmanner. The two are executed roughly at the same moment, with no modification made to the script between. [Oops, cannot post pictures just yet... Here comes the link] http://aspyct.org/media/webmanner-bug.png But the shell below is older (open about 1 hour ago). Newer shells all print out &lt ;. So my first guess was that it somehow had a cached reference to the old inode of the file, or old blocks or whatever. So I modified parts of the script, at the start and then at the end, to print different messages. And, surprise, the message shown up on both terminals. But still, same difference between &lt ; and <. I'm confused... How to explain that behavior? I'm working on a OSX 10.8 (Mountain Lion) EDIT: OK, there is one big difference: the shell below uses ruby 1.9.3, while above is 1.8.7. Is there any known difference in string handling between the two versions ?

  Read the article

• Unexpected media key behavior on new Acer Aspire

  - by Morgan May

  I'm having weird issues with the media keys (play/pause, previous, next, etc.) on a new Acer Aspire laptop. This is the first Acer I've owned and also my first Windows 7 computer, so I'm not sure whether the behavior is a result of some hidden Acer process that I haven't rooted out yet, or some Windows 7 option that I'm not aware of, or something else. I'm experiencing two issues that I suspect are related. Both problems are intermittent but happen more often than not. The media player I'm using is Winamp. I'm pretty sure I've had the same problem when using other media players, but when I tried to verify that before posting this, I only had the problems with Winamp. Because the problems are intermittent, I'm not sure if that's significant. 1) When I press the Play/Pause media key, in addition to playing or pausing the media player, it brings up a little menu in the center of the screen that lists my removable drives (CD/DVD, USB drives, etc.). To make the menu go away I have to either click away from it or hit Escape. Selecting a drive on the menu doesn't seem to do anything. 2) When I press the Previous or Next media keys, it skips 2+ tracks instead of just one (the exact number seems to vary). I've poked around all the control panel options that I can find, and looked through all the utilities that came with the computer with no luck. There's nothing that I can find in the (very slim) documentation, either. I have a hunch that the problem is caused by whatever utility manages global hotkeys, but I haven't found any way to configure that. Any guidance would be greatly appreciated. UPDATE: It looks like Winamp was the culprit. I did have the problem when using other media players, but when I uninstalled Winamp, the problem went away. I'd like to use Winamp, but I can survive with other players.

  Read the article

• Can't login after upgrading to Windows 8.1

  - by flatline

  This afternoon, I upgraded my work laptop from Windows 8 to Windows 8.1. I had previously had a local account, but after the upgrade, it prompted me to enter my windows account credentials, which I had set up beforehand at some point. I entered my password and clicked next, went through another screen or two, grew tired with the process, and clicked whatever the equivalent button to "skip this step" that I was presented with. Now I can't log in. Not with my (previous) local account password, and not with my windows account password. It's a Dell with biometric identification, which I had set up previously, so I put my finger on the reader and it complained that I couldn't use that fingerprint because I had changed my password. But, I hadn't wittingly changed my password at all. I assume that what happened is that, by entering my credentials, my local account was tied to the Windows account, but because I cancelled the process partway through, something went wrong and I cannot log in. A few questions: 1) How do I log in with my windows account credentials? Should LOCALMACHINENAME\username, which was my previous login method, still work for the Windows account? When I booted to safemode it prompted me with WindowsAccount\myemailaddress, which allowed me to login there, but the regular login doesn't accept the '@' symbol. 2) Is there any way to make that account local-only again? I can't find any way of doing it. 3) I managed to enable the local administrator account and get back into the box; failing all else, is there a quick way to migrate my old profile over to a new user?

  Read the article

• Gentoo server time issue, can't manually set time, NTPD won't correct, too big of a time difference

  - by kevingreen

  So, my server is living in the future, unfortunately I can't get lottery numbers, or stock picks out of it. It thinks this is the time: Thu Nov 7 04:07:18 EST 2013 Not correct, I tried to set the time manually via date in a few ways # date -s "06 NOV 2013 14:48:00" # date 110614482013 -- same output, same problem Which outputs Wed Nov 6 14:48:00 EST 2013, but when I check the date again, it's still set to Nov 7th 0400 or whatever. I checked my system messages, and I see this pop up often: Nov 7 03:54:00 www ntpd[4482]: time correction of -47927 seconds exceeds sanity limit (1000); set clock manually to the correct UTC time. Which makes sense, we're way off the correct time. But I can't seem to manually fix it. So now what? Also, I'm wondering if my hardware clock is setup correct, hwclock doesn't return any values. Would that be causing issues? This is a virtualized server, I don't have direct access to the hypervisor, but I can talk to who does, assume I can explain myself well enough. Thanks

  Read the article

• How to fix Windows 7 device removal notification loop

  - by Barry Kelly

  Bit of an odd one this. One of our PCs is getting caught in a loop some time after being turned on, usually after a USB storage device has been attached - sometimes an iPod, sometimes a GPS. Specifically, Windows Explorer starts showing a drive icon and letter (E:, as of right now) for the System partition (the small hidden one at the start of the boot drive). Then, the icon disappears. Then it reappears again. And disappears. It does this very quickly, at what looks like maybe 50 times a second. CPU usage in this loop is also very high; averages about 66%. This machine has an i7 920 CPU, which is quad core with hyperthreading; so this usage rate works out to about 5 100% busy threads, along with whatever normal idle load is (particularly Task Manager itself). Inspecting with Process Explorer shows that the device removal notification infrastructure has gone berserk. The threads in system service processes (i.e. apart from Windows Explorer) which are using all the CPU power relate to device notification. The Disk Management MMC snap-in also fails to run when the loop starts. The only way to break the loop, it seems, is to reboot the machine. Anyone seen anything similar to this, and know of a way to fix it? Machine details: Windows 7 x64, fully patched i7 920, 12GB RAM Intel SSD 80GB (X25-M, I believe; not G2) 2TB 5.2K disk for bulk storage AMD HD 5870 Further hardware details await. I'm going to go through and update all drivers I can find.

  Read the article

• Windows 7: resizing the 'Save As' window

  - by Mark Miller

  I do not know whether my question is appropriate for this forum. Apologies if it is not. I am running Windows 7 Professional with Service Pack 1 on a Dell Vostro 460 PC. I am downloading journal articles from the internet and saving them as *.pdf files. Somehow I unintentionally clicked a button that resulted in the 'Save as' window filling the entire screen of my computer, except for the toolbar at the very bottom. How can I resize the 'Save as' window so it only fills perhaps somewhere around 25% of the computer screen, or whatever the default size for that window is? I have searched the internet extensively and found one or two threads about this problem, but no specific solutions were posted there. One suggestion was to grab the bottom of the window with the mouse and scroll upward until the window was the desired size. That does not appear to be possible in my case. Another suggestion was to click on the window with the middle mouse button before attempting to resize the window, but that does not appear to help in my case either. Thank you for any help. If I should post this question in a different forum here please let me know, or kindly migrate the question to the appropriate forum. If additional information is necessary before a solution can be attempted, please let me know that as well.

  Read the article

• Windows 8 not shutting down properly

  - by Patrick

  Since installing Windows 8, the computer hasn't been shutting down properly. When selecting to power down, the PC quickly displays the shutting down screen, the monitor powers off, and the computer remains on but unresponsive. After about 5 minutes, the computer will turn off. Upon booting into windows again, I am informed that Windows didn't properly shut down. I'm running a fast SSD, and it's a clean install of Windows 8, so there's no way Windows is taking that time to do some sort of hibernate on shutdown or whatever - not to mention the error when entering Windows the next time. This happens on every shut down. Restart works as expected. EDIT: Formatting again didn't work. Fails regardless of drivers installed. Event viewer Always these two messages in close succession: Error (event ID 6008): The previous system shutdown at 7:45:21 PM on ?27/?10/?2012 was unexpected. Critical (kernel power, event ID 41): The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

  Read the article

• visually documenting web server configuration and infrastructure

  - by Alex Ciarlillo

  I have just finished a large re-organization and update of our institutions web server(s). This server hosts 3 virtual hosts, 3-4 blogs, 2 wikis, some legacy static HTML pages, and many hosted documents (PDF, .jpg, .xls). I have organized the site into a structure of something like: /var/www/sites/vhost1, vhost2, vhost3 .../wordpress/blogX .../mediawiki/wikiX Data is in a seperate directory structure so I can run a cron task over it to make sure it is all writeable and such. I then symlink to these data directories for each application. /var/www/data/vhost1, vhost2, vhost3 .../wordpress/blogX/uploads .../mediawiki/wikiX/images All Apache configs are in /etc/httpd/conf.d/vhosts.d/vhost1,2,3.conf On top of this there is also a testing server which mirrors this setup. Once changes are fully tested, they are rsynced down to the live server. All the wordpress installs and mediawiki installs are straight form SVN and updates are done by switching branches or "svn up". So my question is how can I best document to share with a) co-workers, b) possible future replacement, c) myself 6 months from now. Obviously I can make a wiki page, excel document, whatever and fill it with text, but I am looking for a more visual representation that I can use to explain the architecture to less-technical people. Ideally it would be awesome if this visual representation could then be expanded to get more technical details.

  Read the article

• iptables logging not working?

  - by vps_newcomer

  OS: Ubuntu 10.04 Logging daemon: rsyslog For some reason i'm not getting any iptables logs, even thought i don't look through them very often i'd still like to get it working for the sake of it working XD Here is my /etc/ryslog.d/iptables.conf :msg, contains, "[IPTABLES]" -/var/log/iptables.log & ~ My iptables logging prefix is "[IPTABLES]" followed by whatever else (example [IPTABLES] Denied xyz) the /var/log/iptables.log file is being created, however its not getting any entries. I can see the logging entries in dmesg but not in syslog or messages. Whats going on? EDIT: My iptables logging rules: # logging limit LoggingLimit=5/min LoggingPrefix=IPTABLES # Logging chain iptables -N LOG_REJECT iptables -A LOG_REJECT -j LOG # join INPUT to LOG_REJECT iptables -A INPUT -j LOG_REJECT # logging iptables -A LOG_REJECT -p tcp -m limit --limit $LoggingLimit -j LOG --log-prefix "$LoggingPrefix Denied TCP: " #--log-level 7 iptables -A LOG_REJECT -p udp -m limit --limit $LoggingLimit -j LOG --log-prefix "$LoggingPrefix Denied UDP: " #--log-level 7 iptables -A LOG_REJECT -p icmp -m limit --limit $LoggingLimit -j LOG --log-prefix "$LoggingPrefix Denied ICMP: " #--log-level 7 Update: I found a thread that has the same symptoms as i do, apparently is a kernel bug. I am using a VPS so could anyone point me on how to upgrade my kernel or apply a workaround? I couldn't find a 2.6.34 kernel listed in apt-cache. Thread: http://www.linode.com/forums/viewtopic.php?t=5533

  Read the article

• Getting Run time 1004 error in code

  - by krishna123

  I tried the code provided by vba express for combining sheet, while execution it is displaying Run Time error 1004: Application Defined or Object Defined Error: My Scenario is: I have a Excel, in that I have first sheet "Connection" and after it I have Sheet1, Sheet2 and so on. I am combining all sheets except Sheet"Conection" by saying start with sheet2. I tried following line of code to exclude "Connection" sheet: If Not Sheet.Name = "Connection" then but it did not work. Whatever the sheets I have in some of them I have large data in some cells. Here is the code which I am using: I have highlighted the line Sub CopyFromWorksheets() Dim wrk As Workbook 'Workbook object - Always good to work with object variables Dim sht As Worksheet 'Object for handling worksheets in loop Dim trg As Worksheet 'Master Worksheet Dim rng As Range 'Range object Dim colCount As Integer 'Column count in tables in the worksheets Set wrk = ActiveWorkbook 'Working in active workbook For Each sht In wrk.Worksheets If sht.Name = "Master" Then sht.Delete Exit Sub End If Next sht 'We don't want screen updating Application.ScreenUpdating = False 'trg.SaveAs "C:\temp\CPReport1.xls" 'Add new worksheet as the last worksheet Set trg = wrk.Worksheets.Add(After:=wrk.Worksheets(wrk.Worksheets.Count)) 'Rename the new worksheet trg.Name = "Master" 'Get column headers from the first worksheet 'Column count first Set sht = wrk.Worksheets(2) colCount = sht.Cells(1, 255).End(xlToLeft).Column 'Now retrieve headers, no copy&paste needed With trg.Cells(1, 1).Resize(1, colCount) .Value = sht.Cells(1, 1).Resize(1, colCount).Value 'Set font as bold .Font.Bold = True End With trg.SaveAs "C:\temp\CPReport1.xls" 'We can start loop 'Skip Sheet - Connection If Not sht.Name = "Connection" Then For Each sht In wrk.Worksheets 'If worksheet in loop is the last one, stop execution (it is Master worksheet) If sht.Index = wrk.Worksheets.Count Then Exit For End If 'Data range in worksheet - starts from second row as first rows are the header rows in all worksheets Set rng = sht.Range(sht.Cells(2, 1), sht.Cells(65536, 1).End(xlUp).Resize(, colCount)) 'Put data into the Master worksheet '----------------- Error in below line -------------------------------------------------- trg.Cells(65536, 1).End(xlUp).Offset(1).Resize(rng.Rows.Count, rng.Columns.Count).Value = rng.Value '---------------------------------------------------------------------------------------- Next sht End If 'Fit the columns in Master worksheet trg.Columns.AutoFit 'Dim dest, destyfile 'dest = "E:\Test_Merge\" 'destyfile = dest & "_" & trg.Name 'trg.SaveAs (destyfile) 'Screen updating should be activated Application.ScreenUpdating = True End Sub

  Read the article

• Route outbound connections from local network through VPN

  - by Sharkos

  I have a server A running OpenVPN, an OpenVPN client B (a rooted Android phone as it happens) and a third party C (a laptop, tablet etc.) tethered to B. B can use the VPN to access the internet via A; C can use the tethered connection WITHOUT the VPN to access the internet via B. However, with the VPN on B active, I cannot load information from the internet on C. A appears to log similar traffic inbound and outbound when B or C attempt to load a webpage, say, but the VPN on device B reports no inbound traffic when the connection originated from C. Where should I look for packets being dropped, and what ip rules should I use to make sure they are passed back through the VPN and into the local network B <- C? (I'll obviously post whatever further information is needed.) Further info Without VPN: root@android:/ # ip route default via [B's External Gateway] dev rmnet0 [B's External Subnet] dev rmnet0 proto kernel scope link src [B's External IP] [B's External Gateway] dev rmnet0 scope link 192.168.43.0/24 dev wlan0 proto kernel scope link src 192.168.43.1 With VPN: root@android:/ # ip route 0.0.0.0/1 dev tun0 scope link default via [B's External Gateway] dev rmnet0 [B's External Subnet] dev rmnet0 proto kernel scope link src [B's External IP] [B's External Gateway] dev rmnet0 scope link [External address of A] dev tun0 scope link 128.0.0.0/1 dev tun0 scope link 172.16.0.0/24 dev tun0 scope link 172.16.0.8/30 dev tun0 proto kernel scope link src 172.16.0.10 192.168.43.0/24 dev wlan0 proto kernel scope link src 192.168.43.1 192.168.168.0/24 dev tun0 scope link

  Read the article

• Is there a local yubnub.org replacement?

  - by Justin Keogh

  I use yubnub very often... every google search I do by just (in firefox) "ctrl-t" - (now in the url bar) "y g searchterms" [Enter] "y" in this case is a search keyword I added by right clicking in the yubnub.org command box it's really fast, and I just do it automatically now... but the problem is now I am stuck with whatever the yubnub command that I am so used to using does. I cant change it... for example, what if I dont want to use google... but I still want to use the "g" command to search? or say I want to use google's https search... ect... I suppose this would be kinda trivial to implement locally... but I would hate to re-invent the code if it's allready done and in use... ideas? Also a local yubnub.org replacement would save me the DNS lookup and traffic to yubnub.org. I dont expect to be able to import all commands from yubnub.org but that would be cool if possible.

  Read the article

• Internet compression proxy for low speed broadband?

  - by user23150

  I live in a rural location, using high-latency wireless off a local ISP's tower. My speed tests vary day to day, but I can get around 1Mb up/down. The problem is, I work with large files, uploading and downloading (HD videos, development software, etc.). It can be painful to wait sometimes. Plus I do some side contract game development, and it can be very difficult to playtest with other developers (200ms ping is a good day for me). Now, obviously it's not going to be easy to solve the latency problem without different wireless hardware. But speedwise, I am wondering if I can use some kind of compression technology on a proxy. For instance, my work computer has full access to a 26Mb down, 10Mb up connection, that is totally unused at night and the weekends. If I could run some kind of compression technology on our server, and use it as a proxy to route to my home computer, I could stand to gain some major speed. I realize that by bogging down a system with compression, I could potentially lose whatever speed gain I had. But the proxy server is a quad core xeon, and the receiving computer is a pretty decent i7 computer, so that shouldn't be a concern. I found http://toonel.net/ but it seems more geared toward very slow narrowband users, like dial-up. Plus, I would prefer to just be able to point my browser to a proxy server, rather then install software on my client machine. EDIT I thought about my question a little more, and realize I am going to need to install software on my client in order to decompress, and possible compress (for uploading). That's not a huge deal.

  Read the article

• "Document in ADF" on Canon MX340

  - by Michael Donohue

  I have a Canon MX340 multifunction printer. Recently, it keeps saying "Document in ADF" when I turn on the printer. I've tried clearing this multiple times, but as soon as the feeder wheels stop turning, in an attempt to clear the document feeder, it just pops up the same error again. This is particularly annoying, as it blocks all functions on the device - I cannot print, even though printing has no interaction with the document feeder. I've opened up the feeder device, as much as can be done with fingers alone. There just doesn't seem to be anything in there. I ran a sheet of paper through about six times, just to see if some dust might be getting in the way, and I've blown out the feeder with air. Still nothing. At this point, I don't care too much about the ADF working, I just want to disable whatever sensor is tripping this error message. Any ideas? I found this thread online, where a user has the same problem. But no resolution was reached there.

  Read the article

• Is there such a thing as a file hosted container which deduplicates data held within?

  - by Mallow

  Background I have backups of a website which stores all of it's data into a single file. This file is several gigs large and I have many different backups of this file. Most of the data within is mostly the same plus whatever was added or changed to it. I want to keep all the concurrent backups I've made through the years in case I find a horrible surprise of data corruption along the line. However storing a 10gig file every month gets expensive. Seeking Solution I've often thought about different ways of alleviating this problem. One thought that comes up very often combines the idea of a duplicating file system which doesn't require it's own partitioned volume on a hard drive. Something like what truecrypt does, what it calls, "file hosted containers" which when using the truecrypt program allows you to mount and dismount that volume as a regular hard drive. Question Is there a virtual hard drive mounter which uses file-based container which uses data deduplicaiton file system? (This question is a little awkward to put into words, if you have a better idea on how to ask this question please feel free to help out.)

  Read the article

• Router as primary DNS server, Server as alternate? (or vice versa)

  - by Jakobud

  We have a very small business network, with a typical cable modem hooked into a DD-WRT router. We also run a basic CentOS server that does a variety of things, including acting as the primary DNS server for the office. The reason we need an internal DNS server is because we do a lot of internal web development and use the DNS server to add/remove various local network URLs for internal website testing (like www.testsite.com.local). It's very important for us to be able to add/remove URL aliases easily to the DNS. The problem with this setup is that if we ever need to restart the CentOS server or take it offline for upgrades or whatever, then internet access for all computers on the network is lost. That's because each computer relies on that DNS server to access the Internet I guess? The router is online all the time and very very rarely has to be restarted. It would be nice if we could setup my router to be the primary DNS server but still be running DNS on my server. So we could still add my local testing website URLs to the DNS server in CentOS, but be able to also take down the CentOS server without loosing Internet access on the network. How would this be setup? Would I simply need to add both router + server IP addresses to each computer's IP settings? Is the router primary DNS and server secondary DNS server? Or vice versa? Or can one of the two serve as a fallback for the other? What (if anything) needs to be configured on both the router and server in order for them to recognize that the other DNS server exists on the network? Does anyone have any newb-friendly resources for setting up something like this?

  Read the article

• Fixing Windows install by connecting its hard drive via USB to a different laptop

  - by Jason

  I tried to upgrade a laptop to SP3, which broke it. I later found out SP3 doesn't work on that 2002 laptop. I can't uninstall SP3, or fix SP2, because the hard drive is now not detected during setup (I've read that's the problem you get). I put the hard drive in a USB drive case and plugged it into my other laptop, and I can read (& write to) the disk okay. (The hard drive won't fit in my other laptop, so I'm using USB.) I need to get that disk back to SP2, or fix whatever files got screwed up causing the disk to not be recognized. I don't want to do a re-install as there are 80GB of files on it I need, and they won't fit on the HD of my other laptop, and also because I no longer have some of the install CDs for software on it. What do I need to do to fix that drive from my other laptop? (I don't want my working laptop (XP SP3) to get screwed with by putting an SP2 disk in the CD drive, or the non-o/s data on the other hard drive screwed with.)

  Read the article

• Fixing Windows install by connecting it's hard drive via USB to a different laptop

  - by Jason

  I tried to upgrade a laptop to SP3, which broke it. I later found out SP3 doesn't work on that 2002 laptop. I can't uninstall SP3, or fix SP2, because the hard drive is now not detected during setup (I've read that's the problem you get). I put the hard drive in a USB drive case and plugged it into my other laptop, and I can read (& write to) the disk okay. (The hard drive won't fit in my other laptop, so I'm using USB.) I need to get that disk back to SP2, or fix whatever files got screwed up causing the disk to not be recognized. I don't want to do a re-install as there are 80GB of files on it I need, and they won't fit on the HD of my other laptop, and also because I no longer have some of the install CDs for software on it. What do I need to do to fix that drive from my other laptop? (I don't want my working laptop (XP SP3) to get screwed with by putting an SP2 disk in the CD drive, or the non-o/s data on the other hard drive screwed with.)

  Read the article

• query keepalived

  - by tdimmig

  *Note: I have trouble deciding what should go in serverfault and what should go in superuser, if some kindly admin decides this is in the wrong place please move it for me - many thanks. I am implementing a basic HA system with keepalived. I only want to be notified of the failover in the case of hardware failure. I do, however, have the servers switch roles periodically. I have a track_script running on the backup that will vary it's return between 0 and 1 on an interval (once a week, once a month, whatever). Upon returning 0, the priority is raised above that of the master, upon returning 1 the priority is lowered again. This way they trade places on the configured interval. The question: What can I do to tell the difference between a switch caused by my script, and a switch caused because one of the servers died? I certainly want to be notified when there is an actual problem, but not every time the servers change places because of the script. I see that version 1.2.7 has snmp support and I may be able to use it to get some information that could tell me one way or another, but to be honest I've never used snmp before and I don't know how to get the information I want with it (my Google foo failed me).

  Read the article

• Anyone have a script to delete a specific local windows profile?

  - by Jordan Weinstein

  I'm looking for Powershell (preferred) script, or .CMD or .VBS, to delete a specific user profile on a workstation (WinXP) or terminal server (2000, '03 or '08). I know all about the delprof utility... That only allows you delete based on a period of inactivity. I want a script to: prompt admin for a username delete that username's profile and to delete the entire profile - registry hive too (not just the folder structure within Documents and Settings). The same way it would if you went to My Computer Properties Advanced tab User Profiles Settings and deleted profiles from there. Any ideas? All I can think of is doing an AD lookup to get the SID of the user specified, then using that to delete the correct registry hive too... something simpler would be nice though... Basically, my HelpDesk used to be local administrators on our Citrix servers and a common fix for various issues was for them to delete a user's profile on the citrix server(s) and have that user log back in - voila, whatever issue they had was resolved. Going forward, in new Citrix environment, they will no longer be local admins on those boxes, but still need to be able to delete profiles (deleting the entire profile: folder and reg hive is key). thanks.

  Read the article

• please explain these mongo statistics

  - by sivann

  My setup: I have 2 hosts, and 2 shards each. Host1 has 2 shards, and is the master of the replicas host2 has the secondaries of the 2 shards. . host1: shard1 (repset1),shard2 (repset2) host2: shard1 (repset1),shard2 (repset2) There's also a 3rd host that acts as arbitrer. I have 50 threads writing randomly to both shards (using a hash) via mongos with REPLICA_SAFE WriteConcern set on each insert. The questions: mongostat displays about 90% locked for both shards in host1 and about 1% locked on host2. Since I use REPLICA_SAFE which supposedly writes to both servers shouldn't the locks be the same? mongostat reports qr=30 for both shards of host1, and qw=0 always. Since I perform only writes how is this possible? Moreover on host2 all queues are reported 0. Faults are abut the same in all shards/hosts (arround 80). netIn/netOut on the secondaries (host2) are always about 200bytes/sec. Too low. mongos has 53 connections, host1's shards have 71 and 71 and host2's shards have 9 and 8. How is this? Please answer whatever you can. Thanks!

  Read the article

• Emails not arriving to client's inbox. Server not on black list.

  - by EBroker

  Hi, I'm sending emails to my clients who are hosted on GoDaddy for both their website and email. For some reason, my system's emails are no longer reaching their inbox. My email server sends them alerts when an action is completed. These alerts are posted in my system and my email server is sending these out, but there are no bounceback emails. There have been no issues in the past year, but in the past two weeks the problem started cropping up. My clients were forced to switched to a web-based email provider like Gmail, Hotmail, Yahoo to receive their alerts. This is a temporary solution that works in the interim. I contacted GoDaddy and they are indicating that I am not being blocked. I also have a GoDaddy account and can confirm that my alerts aren't arriving in the inbox regardless of whatever safe sender items I employ in the webmail interface. I even switched all the system's outbound emails to Plain Text, no luck. Can anyone provide some insight and point me in the right direction? Thank you in advance.

  Read the article

• Removing expired self-signed certificate in IE9 (created with IIS7.5)

  - by Itison

  Over 1 year ago, I created a self-signed certificate in IIS 7.5 and exported it. I then installed it for IE9 (it may have been IE8 at the time), which worked fine until a year later when the certificate expired. I have put this off, but today I created a new self-signed certificate in IIS, exported it, and attempted to install it in IE9. The problem is that for whatever reason, IE cannot seem to forget about the old, expired certificate. Here's what I tried initially: Accessed my ASP.NET application and see the Certificate error. Clicked "View certificates". Clicked "Install Certificate" and then Next/Next/Finish. At this point, it says the import is successful, but it still only shows the expired certificate. I've tried simply double-clicking on the exported certificate on my desktop. Initially I chose to automatically select the certificate store, but then I tried it again and manually selected "Trusted Root Certification Authorities". I've also tried dragging/dropping the certificate over an IE window and clicking "Open". The process is then exactly the same as it is if I had double-clicked on the certificate, but I had hoped that this would somehow specifically tell IE to use this certificate. I tried opening MMC and with the Certificate snap-in, confirmed that the new certificate was added under "Trusted Root Certification Authorities". It was also under my "Personal" certificates (I guess this is where it goes by default). Nothing worked, so I went through every folder in MMC and deleted the expired certificate. I also deleted the expired certificate in IIS. Nothing has worked. Any ideas? I see no clear resolution and I can't seem to find any posts related to this issue.

  Read the article

• Have some questions about setting up a VPN to my private cloud servers

  - by Pure.Krome

  I've got a number of Virtual Servers running at a pretty big Cloud provider. They are all running Windows 2008 R2. I have a CISCO ASA firewall in front of them. Currently, I've got all ports blocked except 80/443/21/3386 (for Remote Desktop). I asked to have a VPN enabled on the firewall and they said it's easy to do BUT I need to use the 3rd party Cisco software. Now, I don't want to get into a debate about it .. but we don't want to install anything extra on our -client- computers. We all use Windows 7 and we love using the built in VPN client to connect to other private LANS we have setup in other locations. So i'm wondering what options I have to create a VPN tunnel to our private cloud LAN? All our cloud servers are part of WORKGROUP, so there's no Active Directory .. nor do we want to install all that. Secondly, we know we can open up a firewall port - so any ports for starting a VPN is fine! Lastly, I was thinking of just using one of the existing servers as the VPN server (and using the Windows VPN software) .. but I'm not sure this is a good thing? Remember - we just want to use the baked in VPN software in Windows 7 .. which is PPTP or SSTP or L2TP/IPSEC. I would -LOVE- to use some free OSS software. For usernames/passwords? We'd probably just have one account .. like U:Hithere P:whatever.. so we don't need any hardcore account management, like Active Directory, etc. So does anyone have any ideas?

  Read the article

< Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >