Search Results

Search found 5830 results on 234 pages for 'dr casper black'.

Page 143/234 | < Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >

  • Daisy-chainable DisplayPort Monitors

    - by thepurplepixel
    I am the proud new owner of a MacBook Pro with a mini-DisplayPort. My desk setup used to allow me to position the screen of my old MacBook beside an external monitor, essentially allowing dual-head. It was also advantageous that my old MBP and my external monitor had the same resolution, 1440x900. Now, I'm searching for a set of two monitors that I can use a HengeDock with. Unfortunately, the MacBook Pro suffers from having only one mini-DisplayPort. Looking up the spec for DisplayPort 1.2 (which the MBP supports), DisplayPort daisy chaining is supported. What I'm looking for is a monitor that has two DisplayPorts so I can daisy chain two monitors off the single mini-DisplayPort. What I don't want is a USB-based video solution. I need full acceleration on both monitors; an external video card won't cut it. I hope I don't have to wait a few years for these monitors to come out. TL;DR: I need two monitors with two DisplayPorts each that I can daisy-chain. Thanks!

    Read the article

  • Can I build or test a computer without a case?

    - by jasondavis
    I am in the process of building a really nice new PC right now. It's going to have a nice Lian Li case with the internals powder coated black and all the wires will be sleeved. So my problem is I am getting parts in a couple days but my case will not be completed for about a month because it is on back order plus time to powder coat it. I am purchasing many of m y parts from newegg.com and they claim you must return any dead parts within 30 days or the invoice for there warranty to replace bad parts. So is it possible for me to set up the PC without a case just to test that the main parts are working correctly within the timeframe I am allowed? If this is possible, how do I deal with turning the system on/off without a powere button? Or is therer one on a motherboard? Thanks for any tips/advice

    Read the article

  • Sendmail relay out of Amazon EC2?

    - by Stephen Belanger
    I have a site running on CentOS 5.4 through Amazon EC2. Unfortunately, Amazon has had nothing but trouble with their entire IP range getting black listed from spam tracking services regularly. I need a mail server, so I setup an smtp server elsewhere that I want to send to, but I can't just send directly to it through PHP because the direct smtp request is way too slow. What I want to do is relay through sendmail, but I've never used sendmail before, so I have no idea how to configure it. All I want is for all emails sent from localhost to be relayed to one specific external server, but I don't know how to do that. I tried to find a tutorial online, but couldn't find anything that was particularly clear as to how I go about doing that. Can anyone help me out?

    Read the article

  • Does Windows 7 support multiple simultaneous nVidia graphics cards with different drivers?

    - by mckenzieg1
    On one of my dev machines at work (currently running XP), I have two nVidia graphics cards: Quadro NVS 440 (my original card, for my three primary monitors) GeForce GTX 275 (just added, for CUDA development) I can get both cards to work OK by installing the latest GeForce drivers, but I get some annoying-but-not-crippling display artifacts on the Quadro's screens (mostly scattered black rectanges where repainting fails for a few bits of UI in certain applications). Under XP, this seems to be the best I can do. I can use Device Manager to supposedly install different nVidia drivers for the two cards (the latest Quadro drivers for the NVS, the latest GeForce drivers for the GTX), but I actually end up with the same driver for both, because the driver dlls all have the same names and get installed on top of one another in the system directory. I have read that Win7 has a new video driver architecture that better supports multiple heterogeneous cards. Does anyone know if that will handle my scenario? If so, it will give me a compelling reason to get that machine on Win7 ASAP.

    Read the article

  • How to integrate monit into web app deployment process

    - by shabunc
    I have: Tomcat with webapp deployed via mvn tomcat:redeploy. Monit, pinging the host and restarting server if ping failed. The thing is there in a moment during the redeployment when ping will fail - and this is normal, actually. So, the question is - what is the best way to teach monit to consider the fact of redeployment and not to confuse it with "real" black outs. This is of course an issue of balance between elegance, ease of implementation and scalability. The most straightforward solution I can think of - is just to shutdown monit before deployment and start it up after once again. But this if far from elegance I guess.

    Read the article

  • Changing ati graphics setting into a batch file

    - by FrozenKing
    I want to change my saturation level to zero and again to default but I can do it manually by going to ati catalyst center. Since, I want to do it regularly I need some batch file code or program to alter this settings in a click or using shortcut keys. The reason I am doing this because I want to change my screen to black and white from color since b/w will make my eyes less tired then a colored display. I came to know about this saturation from my previously asked question : Changing display color from B/W to color (vice-versa)using a program.

    Read the article

  • TC hashing filters - single rule deletion

    - by exa
    For traffic shaping I'm currently using a setup that looks exactly like the setup from LARTC, on this page: http://lartc.org/howto/lartc.adv-filter.hashing.html I have a simple problem with that - everytime I want to modify something in the hash table (like assign a IP to different flowid), I need to delete the whole filter table and add it again filter by filter. (I actually don't do it by hand, I have a nice program that does it for me... but still...) There is a problem - I got roughly 10k filters allocated this way and deleting and refilling the whole filtertable can get pretty lengthy, which is not exactly good for traffic shaping. My program could easily manage to delete only the rules that need to be deleted (thus reducing the whole problem to several commands and miliseconds), but I simply don't know the command that deletes only the one hashing rule. My tc filter show: filter parent 1: protocol ip pref 1 u32 filter parent 1: protocol ip pref 1 u32 fh 2: ht divisor 256 filter parent 1: protocol ip pref 1 u32 fh 2:a:800 order 2048 key ht 2 bkt a flowid 1:101 match 0a0a0a0a/ffffffff at 16 filter parent 1: protocol ip pref 1 u32 fh 2:c:800 order 2048 key ht 2 bkt c flowid 1:102 match 0a0a0a0c/ffffffff at 16 filter parent 1: protocol ip pref 1 u32 fh 800: ht divisor 1 filter parent 1: protocol ip pref 1 u32 fh 800::800 order 2048 key ht 800 bkt 0 link 2: match 00000000/00000000 at 16 hash mask 000000ff at 16 The wish: 'tc filter del ...' command that removes only one specific filter (for example the 0a0a0a0a IP match (IP address 10.10.10.10)). Removal of some small subgroup would also be good - for example I could still recreate a bucket (bkt a) pretty fast. My attempts: I tried to number all the filters using prio, but with no help -- they just create something unusuable (but deletable) below, but the bucketed filters remain there after that gets deleted. Any ideas? edit - I'm adding a simplified tl;dr description of the problem: I created hash filter on some interfce just like in this http://lartc.org/howto/lartc.adv-filter.hashing.html I want to find a command that deletes one rule (e.g. 1.2.1.123) from the table, leaving the rest untouched and working.

    Read the article

  • How come my form input sometimes moves when I refresh the page?

    - by samoz
    On a page that I'm designing I have a form with one input of type text. Normally, this form and input render properly in my browser, Chrome, but occasionally, it renders about 20 pixels to the left of where it is supposed to be. When I refresh the page, it goes back to the original, correct place. I have only tested in Chrome so far, so this isn't a cross-browser issue (it happens in the same browser). Is there anything wrong with my code below? Here's my HTML code: <!DOCTYPE htmls> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <link rel="stylesheet" href="style.css" type="text/css" /> <title>Test Site</title> </head> <body > <div id="supercontainer" class="style1"> <img class="floater" src="top.jpg" alt="Top" /> <img class="floater" src="left.jpg" alt="Left" /> <div id="content"> <p id="theText"> Welcome. Please type a username. </p> <form id="prompt"> <div><input type="text" name="promptLine" autocomplete="off" id="promptLine" onkeypress="return submitenter(event);" value="% " /></div> </form> </div> <img class="floater" src="right.jpg" alt="Right" /> <img class="floater" src="bottom.jpg" alt="Bottom" /> </div> Here's my CSS code: #supercontainer { margin: 0 auto; width: 900px; display: block; } img.floater { display: inline; float: left; } #content { background-color:black; display: inline; float: left; padding-left:5px; padding-right:5px; min-height:458px; max-height:458px; min-width: 803px; max-width: 803px; color: lime; } #theText { text-align:left; margin-bottom:0; margin-top:0; line-height: 0.3; font-family:"Courier New", Courier, monospace; } #prompt { position: fixed; top: 470px; } #promptLine { width: 100%; background-color: black; color: lime; border: none; outline:none; }

    Read the article

  • Installing 2 DDR3 Sticks in MB with 4 Slots

    - by The Sasquatch
    Hey everyone, I just put together my first system that uses DDR3 memory. The motherboard I got is an ASUS M4A77T/USB3 and it has 4 DDR3 RAM slots. Looking in the manual for the MB it doesn't say anything about how to install the RAM as far as matching the pairs goes. I have 2 4GB sticks of RAM, and whether I put the sticks next to each other (of the 4 RAM slots, there are two blue ones next to each other and 2 black ones next to each other) or space them apart, The BIOS still shows that I have 8GB installed. I have been getting an IRQL_NOT_LESS_OR_EQUAL BSOD error, and have read in some other places that it could be hardware/RAM related. Does the RAM need to go in the A1, A2 slots (different colored but both A), or the A1 B1 slots? (A1 B1 are both the lovely blue color.) Any help would be awesome. THANKS!

    Read the article

  • IIS serving pages extremely slowly

    - by mos
    TL;DR: IIS 7 on WS2008R2 serves pages really slowly; everyone assumes it's because it's IIS and we should have gone with an Apache solution on Linux. I have no idea where to start debugging the problem. I work in a nearly all-MS shop with a bunch of fellow programmers who think Linux is the One True Way. Management recently added a Windows machine with IIS to serve Target Process (third-party agile system), but the site runs extremely slowly. Everyone, to a man, assumes it's because it's on IIS, and if only management would grow a brain and get some Linux servers in here, we could really start cleaning things up! ...Right. Everyone "knows" IIS isn't fit to serve .txt files. ...Well, as the only non-Microsoft hater in the bunch, I am apparently the only one who thinks maybe the Linux guy who hated being told to set up the IIS server may have screwed things up. I'd like to go fix it, but I don't have any clue as to where to start as I am not a sys admin. Help?

    Read the article

  • HDD bad sectors with OS

    - by Michael Z
    I wonder is that possible for OS to make bad sectors on Hard Drive? Preface: I have bought new HDD on 1Tb WB Caviar Black. I have installed new OS on ext4 partition Ubuntu 12.04.1 LTS. After few days S.M.A.R.T. of the Ubuntu's Disk Utility show that my hard has bad sectors! I have checked on S.M.A.R.T. immediately after installing OS - all was OK. During new OS working I have noticed some strange with HDD - all OS was freezed from 20 sec to 1 min and I have heard like HDD's engine restarting. At the dmes I have found something like this: [40085.407947] ata1.00: device reported invalid CHS sector 0

    Read the article

  • Laptop overheating within minutes of start up

    - by Spik330
    I have a Dell Windows 7 Home Prem with an I7-720QM. More information on the computer can be found here http://www.dell.com/support/home/us/en/04/product-support/servicetag/51CVCN1/configuration The Problem I am having is the computer will over heat unnaturally fast. From the time it takes from boot to when i can run my diagnostic tools which takes about two minutes the cpu temp is 86c after a few more minutes the cpu temp will reach 100 and the computer will black screen shut down. In total the the laptop can only be run for 3-5 minutes before completely shutting off. During this time there is nothing extensive running. After the laptop shuts down you have to wait for it to cool down or it will shut off even faster sometimes 7-15 seconds well still in the boot screen. Does anyone know what could be the problem maybe a sensor or is the computer fried?

    Read the article

  • External monitor image not centered in the screen

    - by kemp
    I'm using Xorg 7.5 on a Radeon HD4870 with the FOSS radeonhd server on my HP 6830s. The laptop has a VGA connector and I attach it to a 37" panasonic plasma TV. It works fine except for a little annoyance: when activated, the TV screen is set to the resolution of 1360x768 (which it reports as being the highest it supports) but all the image is shifted by about 100 pixels to the right. I can't see the leftmost part of the page, and I have a black vertical bar to the right. If I change the resolution to 1024x768 there is no shifting, the image fills the entire screen with no parts hidden, but at this resolution the image is stretched. How can I tune the position on the external monitor so that the image is centered in the screen filling it entirely?

    Read the article

  • Clone a 2TB WD Green internal drive with bad sectors to a 3TB partitioned external

    - by ron
    I have a 2TB WD Black drive and would like to simply do a straight clone from a failing 3TB drive to it. Both are SATA. Will I be able to just install the new drive alongside the faulty one and then do the clone/rescue attempt with ddrescue or is there a better method? The faulty internal drive mentioned has bed sectors although am usually able to boot into Windows 7 Ultimate with it and navigate and access all my programs. I have been attempting some trials with an Ubuntu Live CD using ddrescue but am not sure I'm doing it right. I have a 3TB WD my book essential external which is GPT and have created a separate 2TB partition on it which I am trying to clone to. I assume I need to format the new drive first to NTFS? Can I do that via the Ubuntu Rescue Remix 12-04 live DVD that I've been booting with?

    Read the article

  • Trouble with external monitor under Windows 7 on MacBook Pro Boot Camp

    - by Colm
    I'm running Windows 7 32-bit on a mid-2010 15" MacBook Pro Intel Core i5 under Boot Camp. I've had trouble getting it to work with my second display and searching Google for an appropriate answer has failed me. I'm on the latest version of Boot Camp - 3.2 - and have updated the drivers for the NVIDIA GeForce GT 330M. The monitor is connected via a VGA cable, and is a Dell ST2410. The monitor is recognised by Windows, which knows it's a Dell and its resolution. The desktop should be extended onto the second monitor - however nothing is showing. It remains black, though it doesn't show a lack of signal coming through which I would have expected. Any ideas what's wrong?

    Read the article

  • Lenovo t400 laptop docking station with DVI out shows green artifacts when connected to monitor

    - by Roy Rico
    I have a Lenovo T400 laptop, with Windows XP. I have a docking station connected via DVI to my Samnsung monitor. I'm connected at 1920x1200 resolution and I keep seeing all these green dots (when colors are supposed to be near black). It's really bad. I have tried running on my Samsung monitor, at all sizes, even down town 1280x1024 like my monitors at work. When I use the docking station at work, I am able to connect 2 1280x1024 NEC monitors (one via DVI, one through VGA, both through my docking station). I have absolutely no issue there, both displays work great. I have tried to update the drivers, I've even installed the latest video drivers from lenovo's site (DEC-02-2010). Is anyone familiar with this issue? Details: Docking Station: Lenovo Advanced Mini Dock- 250410U - NIB Montior at home: Samsung T240 24-inch monitor Monitors at work: NEC monitors

    Read the article

  • How can I to take an HDMI TV broadcast and overlay text in real time?

    - by ObligatoryMoniker
    Our company wants to be able to have LCD TVs displaying TV with the ability to add an overlay, like a stock ticker at the bottom of the screen, where human resources can add content to be displayed. I have been trying to nail down the correct terminology for this and come across terms like Keying, Compositing, Live Broadcast Graphics Presentation, and Hardware Overlay but I don't know which of these terms is truly the correct way to refer to what I am trying to do. Black Magic offers a product that seems like it can do what I am looking for but their product seems like it is geared for a totally different purpose than what I would be using it for. Compix also seems to have a product that would do what I need but again it seems like killing a fly with a sledge hammer. How can I to take an HDMI TV broadcast and overlay arbitrary content in real time?

    Read the article

  • Security and encryption with OpenVPN

    - by Chris Tenet
    The UK government is trying to implement man-in-the-middle attack systems in order to capture header data in all packets. They are also equipping the "black boxes" they will use with technology to see encrypted data (see the Communications Data Bill). I use a VPN to increase my privacy. It uses OpenVPN, which in turn uses the OpenSSL libraries for encrypting data. Will the government be able to see all the data going through the VPN connection? Note: the VPN server is located in Sweden, if that makes a difference.

    Read the article

  • vmware esxi 5, cant create snapshots and consolidate fails, how to delete old or consolidate redo logs?

    - by Scott Szretter
    I have a VM that seems to be working ok, but when VMWare DR (or I) tries to create a snap shot, it fails, and when I view the summary page of the VM it has a warning at the top showing that the disks need to be consolidated. So I go to snapshot manager for the VM and choose consolidate (in snapshot manager, there are no snapshots actually listed by the way). If fails with this error: This virtual machine has 255 or more redo logs in a single branch of its snapshot tree. The maximum supported limit has been reached, creating new snapshots will not be allowed. To create new snapshots, please delete old snapshots or consolidate the redo logs. If I browse the data store (which has plenty of free space, 2 TB and this vm is under 40gb), in the vm folder, I do in fact see a bunch of files, numbered all the way to 0255: myvm-000255-ctk.vmdk myvm-000255-delta.vmdk myvm-000255.vmdk How can I clean all this up? Is there an SSH command line command or can I delete some of the files safely? Thanks!

    Read the article

  • Create intentional border with xrandr

    - by benizi
    Is there a way to tell xrandr "this space intentionally left blank"? I have a laptop that drives its internal display at 1920x1080, but the external monitor I'm using, due to its different aspect ratio, doesn't have that mode. It runs at 1920x1200. So, the basic setup: xrandr \ --output LVDS-1 --mode 1920x1080 \ --output DP-1 --mode 1920x1200 --same-as LVDS-1 [not to scale:] +-----------------------------------+ ¦ ¦ ¦ ¦ (laptop) ¦ (external) ¦ ¦ (LVDS-1) ¦ (DP-1) ¦ ¦ ¦ ¦ ¦ ¦ ¦ +-----------------¦ ¦ (blank...) ¦ ¦ +-----------------+ How can I specify that the 1920x120-sized region below LVDS-1 should be displayed as a black bar that can't be accessed by mouse on DP-1? I tried just coping with --panning 1920x1200+0+0/1920x1080+0+0/0/0/0/120, but I found the screen movement to be very annoying. Update: I found a workaround. (Update 2: changed it to an answer, per suggestion -- workaround doesn't answer the underlying question of leaving space blank.)

    Read the article

  • Lost contact with my NAS after changing its IP

    - by Beles
    I did some brain-dead reconfiguring of my D-Link DNS-323 NAS some days ago. I have a home network where each computer gets a dynamically allocated IP address starting at 192.168.1.100. The irritating point (for me at least) was that the NAS changed IP if the power went down or I turned off the router. I then had to remap a drive-letter to point to the new IP address of the NAS. To remedy that I configured the NAS to have a static IP, 192.168.0.10. I had no good reason to choose that IP, other than I found it in a user manual for the NAS. After I changed the IP and rebooted the NAS it disappeared from the network and was never to be found again. Now I have a black brick standing in my home, looking good, but "dead". Could anyone point me in a direction which helps me solve this problem? I have about 100gb worth of pic of my children on this brick so I really want it back :-) Sincerely,

    Read the article

  • What did Emolator do with My Laptop?

    - by Garry
    I played SEGA with my KEGA.exe (Sega Emulator) and it made my right key to be malfunctioned. Befor that day, I had played it, too in my notebook with fullscreen mode, and suddenly my ACER Aspire One notebook restarted during that emulator was running and before the screen was black (boot), my screen was blue with many words but I couldn't read them, but I remember that there was a word like 000000 x 0000000 x 000000 and bla bla bla. And when I played without fullscreen mode, It didn't happened but it made my right key to be malfunctioned until when I went to Bot setup, my right key doesn't work. Do U know what is the problem of my emulator? Can U explain me for that?

    Read the article

  • Adding a div layer on top of a jquery carousel. Tough one.

    - by wilwaldon
    Hey everyone, I have a tough one, well it's tough for me because I'm kinda new to the whole jQuery carousel thing, never built one before this project. Here's my problem. If you go to the TEST SITE you will see a scroller with a blue background about half way down the page. If you mouse onto the "data analytics" slide you should see a black box fade in. Here is my dilemma. I want that black box to be a menu that's connected to the data analytics slide. I've done a mock up for you so you can see what I'm talking about. Here is my scroller code. I'm using jCarousel. <div class="carousel"> <ul> <li> <div id="homeslide1"> testers sdfasdfasdfas asdftjhs iasndkad kasdnf <a href="#" id="#homeslide1-toggle">Close this</a> </div> <a href="#" id="homeslide1-show"><img src="<?php bloginfo('template_url'); ?>/images/home_data_analytics.jpg" width="200" height="94" /></a> </li> <li><img src="<?php bloginfo('template_url'); ?>/images/home_oem_partnerships.jpg" width="200" height="94" /></li> <li><img src="<?php bloginfo('template_url'); ?>/images/home_reporting.jpg" width="200" height="92" /></li> <li><img src="<?php bloginfo('template_url'); ?>/images/home_returning_lost_customers.jpg" width="200" height="92" /></li> <li><img src="<?php bloginfo('template_url'); ?>/images/home_sales.jpg" width="200" height="92" /></li> <li><img src="<?php bloginfo('template_url'); ?>/images/home_service_retention.jpg" width="200" height="92" /></li> </ul> Here is my scroller css /*HOMEPAGE SCROLLER*/ .carousel {!important padding:10px; width: 890px; margin: 0px 0px 0px 26px;} .carousel ul li element.style{height: 94px;} .carousel ul{width: 200px; padding: 5px;} .carouselitem{height: 94px;} .prev{background: url(images/home_left_scroll.png); height: 94px; width: 16px; text-indent: -999px; outline: none; cursor:pointer; float: left;} .next{background: url(images/home_right_scroll.png); height: 94px; width: 16px; text-indent: -999px; outline: none; cursor:pointer; float: right;} .carousel ul li{ padding: 0px 3px 0px 3px; margin: 0px; height:!important 94px; } .home_right_arrow{ width: 16px; float: right;} .home_left_arrow{ width: 16px; float: left;} .homeslide1{ width: 200px; height: 94px;} I've tried all sorts of z-index tricks but can't seem to figure it out on my own. If you solve this riddle I'll buy you a beer if we ever meet up. I'll also give you a high five through the internet. Is there a simple way to do this via jQuery? If so could you point me in the right direction? Thanks so much.

    Read the article

  • Windows 7 unresponsive after hibernate.

    - by Simon Verbeke
    The last few days, when I get Windows out of hibernate, Windows itself gets unresponsive. I can use any of my programs that were already opened before hibernating, but the window functions (closing, changing the size etc) aren't reacting. I can't open any new programs, except for the Task Manager. Also, I don't get an Internet connection. When I use Ctrl + Alt + Del, I get either a black screen, or the regular background. Then it hangs and after a while shows me a message that Windows failed starting up that "thing"(don't know what it's called in English, something with safety, etc). I have Windows 7 Ultimate installed.

    Read the article

  • Hyper-V Guests suddenly stopped working

    - by Anton Gogolev
    Hi! Here's my configuration: Windows Server 2008 R2 Standard as a host OS, and two guests VMs running the same exact OS. Yesterday, Trial Activation on all OSes has expired and quite naturally all machines shut down. I rearmed the host, but cannot log on to either guest VMs. From what I see, they start up normally (State is listed as Running) but CPU Usage seems to be stuck at 3% and when I connect to it all I see is black textmode screen with cursor blinking. One of my VMs has several snapshots, and when I revert back, it starts up normally. Moreover, "reference VM" (the one I cloned these two VMs from) starts up just normally. How can I troubleshoot this issue?

    Read the article

< Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >