Search Results

Search found 5716 results on 229 pages for 'dual channel'.

Page 143/229 | < Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >

• 1 TB hdd and no space to create a partition for linux !

  - by rangalo

  I have a brand new Acer aspire 5811 with core i5 processor and all that. There is windows 7 Home Premium pre-installed on it. I want to install arch and setup a dual boot system. The problem is: Windows shows 4 partitions 14 MB UNKNOWN recovery partition 100MB NTFS System Reserved partition for Windows 7 448GB NTFS Windows 7 system partition 468GB NTFS Data partition for windows 7 But GpartedLive cd and also arch setup show 5 partitions 938Kb UNKOWN system reserved partition 14 MB UNKNOWN recovery partition 100MB NTFS System Reserved partition for Windows 7 448GB NTFS Windows 7 system partition 468GB unusable space Because of this, I cannot create another primary partition. Can any body guide me about how should I go for creating partition for installing arch ? Note: I need to keep windows 7 working. regards.

  Read the article

• What could cause my LAN Pings be greater than 100ms?

  - by James Holland

  I have 2 servers (Both: Windows Server 2008, Dual Xeon 2.8Ghz, 32GB RAM, 8 x 15k SAS Drives). One of them is a DC / Web server / Exchange Server, the other is a SQL Server (2008). I have a 48 port Netgear GS748T Gigabit switch. When I ping from server to server, I get ping times <1ms, great, but when I ping from a PC, I get varying pings from the occasional <1ms to 500ms!! If I log into either server and look at Task Manager, CPU usage peaks at 20%, memory usage is 100%, but I am led to believe this is normal as Exchange will just use as much as you have, and release it when requested. Network usage peaks at 1%. I really don't understand how the ping can vary that much. I know I am giving very little info, but this is all I know, I apologise, but can anyone help? In response to question, I have pinged by both IP address and hostname, no difference in ping times.

  Read the article

• Where to store short strings (with my key) on the internet?

  - by Vi

  Is there simple service to store strings under my key that can be used by bots? Requirements: Simple command line access, automatic posting allowed No need to keep some session with the service alive I choose the key (so pastebins fail) No requirement for registration/authentication (for simplicity) The string should be kept for about a month. I want something like: Store: $ echo some_data_0x1299C0FF | store_my_string testtest2011 Retrieve: $ retrive_my_string testtest2011 some_data_0x1299C0FF Do you have ideas what should I use for it? I can only think of using IRC somehow (channel topics, /whowas, ...), but this is too complex for this simple task. No security is needed: anyone can update my string. The task looks very simple, so I expect the solution to be similarly simple. Expecting something like single simple curl call.

  Read the article

• What decent audio recording interfaces are well supported in Windows 7 64bit?

  - by labradort

  I currently have an Audigy 2 ZS Platinum. It permits me to insert a 1/4" jack line from bass guitar and play along with pre-recorded piano music. This worked fine under Windows XP. I am moving to Windows 7 64 bit (dual boot for now), and Creative may not develop fully working drivers for this component. Looking around, I don't see Windows 7 support mentioned at product web sites from E-MU, Roland, M-Audio, etc. Even at Creative, the posting of available drivers for Windows 7 is deceptive, as they do not adequately support recording (latency, distortion). My local music store shrugs and says to stay with Win XP. In some cases, the Vista drivers will work in Win 7. So I need real world feedback on this. I should also mention I'm not impressed with available USB interfaces - they have too low of a signal to noise ratio for my purposes. That leaves PCI, or possibly firewire devices (never tried one yet).

  Read the article

• Windows shuts down unexpectedly when waking up from sleep

  - by Kush

  I've been facing this issue since yesterday, whenever I put the computer into sleep mode and when I wake up, it takes me to boot menu with choices; start Windows normally, safe mode, etc. in short, it shuts down unexpectedly while waking up. I have my laptop dual booted with up-to-date Windows 7 SP1 (32-bit) and Ubuntu 10.10. This problem is not happening with Ubuntu. I googled the issue and went through this, this and this page. But, none of the threads were helpful to solve it. I've found that there's something to do with device drivers. What can be done to resolve the issue? Can SFC utility solve it if it is due to corrupt system files?

  Read the article

• Remote Desktop with resource sharing

  - by Malfist

  I recently removed ubuntu from my laptop and installed Windows 7 because Microsoft's DreamSpark program gave me Visual Studio Pro for free and I want to do some C# programming with it. The problem is that my laptop's screen is small, it's resources are extremely limited, and it doesn't have a full sized keyboard. However, I do have a desktop that is my primary system, and it's got a quadcore and tons of RAM in it, and dual monitors. My question is this, is there a way I can use a program from my laptop, on my desktop, and share my desktops CPU and RAM with the laptop? Everything is connected through a 100 MB/s switch. One caveat, my desktop is running ubuntu.

  Read the article

• MAC OS for Intel based PCs

  - by Maven

  I have an Intel dual core PC with 4GB of RAM and Graphics card. For on of my student Assignment I need to install Latest possible MAC OS on my system as a secondary OS. Like on boot it asks me that which OS i want to boot with Win 8.1 or Mac Os.. I searched on the internet and found two conflicting opinion some people said there are few MAC OS Version which can be directly installed on Intel PCs some says there aren't? I am here to get rid of the confusion that is an official latest possible MAC OS version for Intel based PCs? If not what are my options if I want to run MAC OS on my PC. Please not that Virtualization options won’t work for me, it has to be working as full OS not an os inside another.

  Read the article

• NTFS write speed really slow (<15MB/s) on Ubuntu

  - by Zulakis

  When copying large files or testing writespeed with dd, the max writespeed I can get is about 12-15MB/s on drives using the NTFS filesystem. I tested multiple drives (all connected using SATA) which all got writespeeds of 100MB/s+ on Windows or when formatted with ext4, so it's not an alignment or drive issue. top shows high cpu usage for the mount.ntfs process. AMD dual core processor (2.2 GHz) Kernel version: 3.5.0-23-generic Ubuntu 12.04 ntfs-3g version: both 2012.1.15AR.1 (Ubuntu default version) and 2013.1.13AR.2 How can I fix the writespeed?

  Read the article

• How to force a resolution in linux?

  - by hi

  I have a HP LP3065 that requires a dual link dvi cable to go up to 2560x1600 resolution. However, I do not have that cable, but I want to use 1920x1200 resolution. However, my nVidia Display Settings (also system display settings) will only go up to 1280x1024, which looks horribly pixelated on the 30". How do I force the 1920x1200 resolution? I tried adding the mode into my xorg.conf file, but it still would not take it. I know my vid card can do 1920x1200 since it works on the 24" monitor with the same dvi cable. Here are my specs: Fedora 12 Nvidia Quadro NVS 420 Intel Xenon E5530 cpu 6gig memory Thanks

  Read the article

• Using a sky card in Media Center

  - by Jonathan

  I'm not 100% is this SU suitable but oh well. I'm wondering if it's possible to get a slot of some kind to put my Sky Card into a Media Center PC and then be able to have a triple or dual tuner, and connect to the satelitte dish, allowing me to record 3 and watch a previously recorded. Also it would mean access to Youtube and things easily, with only one box. Also would this be legal or is it similar to Apple where you can only use Mac OSX on boxes with the Apple Logo on?

  Read the article

• Hyper-V Cluster with failover - NETWORKING

  - by Adam

  Hi We are looking to setup a 3 node Hyper-V cluster with live migration and failover using: 3 x Dell R710's with dual quad core Xeon & 128 GB RAM & 6 NICs in each 1 x Dell MD 3220i SAN We will be running this setup from a data center and so co-locating our kit. Can anybody explain how we should setup the network connections to make the system redundant? We have looked into this great article but are not sure how to get a 3 server setup correctly and reliably: http://faultbucket.ca/2011/01/hyper-v-failover-cluster-setup/. I believe we need network connections for: live migration, heartbeat, management, hyper-v etc. I assume as we are running it from a DC all IPs will have to be public IPs? Are AD servers will be VMs. One on each Hyper-V server and setup not to be HA.

  Read the article

• Needs free/ opensource network monitoring tool for office LAN

  - by Amit Ranjan

  I know there must be a lot similar questions on SU. Let me explain my setup first. I have 4-5 PC, Laptops and Few Android Phones in my office. To get them on a network , I have a UTStarCom, WA3002G1 ADSL2+ router with a landline broadband connection which has nothing to do with any PC except the configuration settings. Broadband channel is always on, we need to switch on the router and the internet is ready for us. No Internet Connection sharing is done via any PC. I have a limited 20GB monthly plan, which is consumed in 10-20 days, depending upon the download requirements. So in the above case, i need some suggestions from you: How do I monitor my Internet Bandwidth along-with the connected systems, realtime? Any free opensource tool available? Tweaks / Changes in PC to save bandwidth as my ISP do not have any Unlimited plan. PC and Laptops are Windows XP and/Or windows 7. Either of the platform tools are welcome.

  Read the article

• Ubuntu 10.04 install - frozen at splash, no errors

  - by Andrew Bolster

  Has anyone else come across this? After about as much of a fresh install as i can muster without buying new drives, and after walking through the amd64 alternate install with ease, and after a little 'pre-splash' screen where the orange dots under the (very sexy) new ubuntu logo blink away, I'm left with a vista of purple hues and logo plonked in the middle, with the dots not going anywhere. I was at this same position last night at 3 in the morning, left it lying overnight, and nothing had changed, so I'm pretty sure its frozen, the virtual terminals are not accessible, ie, c+a+F1 etc does nothing, but when i go in and inspect /var/log/* in the recovery console by booting off the installation cd, no errors, no complaints, no problems. I'm at my wits end and am just about ready to try anything. If this was on SO I'd be bountying, but if anyone can help you'll just have to cope with my thanks! Additional Details on my blog and my first attempt at asking for help Update: I can reasonably say it is not a hardware fault, as a full install of 9.10 with dual screen nvidia xinemara indicate that nothing is wonky

  Read the article

• Increase text size in Ubuntu 10.04 due to having large resolution/monitors

  - by Sridhar Ratnakumar

  I have 24" dual monitors with 1920x1080 resolution on both of them. Consequently the text appears so small. I use the following text-intensive applications frequently: Web browser (Google Chrome) IDE (Komodo) Terminal (Gnome Terminal) Email (Thunderbird) I can configure text size on IDE, Terminal and Email. But for Chrome, it is not a good idea to set proportional font size because often one wants to see the entire (not just proportional fonts) site to be zoomed. So I am asking: Is it possible to increase DPI in Ubuntu (much like on Windows) so as to increase the text size across all apps? OR Is it possible to set permanent 'zoom' in Google Chrome, using a third-party extension maybe? I am using Ubuntu 10.04 (Lucid Lynx)

  Read the article

• Linux and ClickPads

  - by John

  I just got my Arch / Windows 7 dual-boot setup running... except for one thing. I have an HP dv6-3127dx laptop, which is an issue when it comes to Linux because it does not have a traditional touchpad, but a "ClickPad." This means where the left and right buttons exist, it is also sensitive to moving the pointer. The issue comes in when I try to steady the mouse with one finger, while clicking the left click with another, because the mouse freaks out. It's also an issue because it's not recognizing the right click whatsoever. I am currently using the default Synaptics drivers downloaded from pacman on Arch Linux, running Linux v2.6.36. EDIT: The question of course is, how can I fix this?

  Read the article

• Radeon 5850 Why am I not getting 3 monitors up as a choice ??

  - by Jan

  Ive just bought the top end ATI Radeon card with 2 normal monitor ports and a HDMI. The idea was to continue using my dual screen setup as always and to use the last plug, the HDMI on my TV. I got a new 52 inch HD TV with all the necessary bits. This should work fine. But.. in Display Properties I still get only my 2 monitors up as options. Not the Digital TV. When I unplug 1 monitor and restart the computer, I get the TV and the other monitor. But never all 3 at the same time. Why is this ? Where can I go to tell it that I need all 3 screens at the same time. Also I get a message saying my gfx card also gives sound through the HDMI cable.. But the TV tells me its recieving a sound format that it does not understand. Any ideas on that too while were at it ?

  Read the article

• Unable to run VMs on hyper-v

  - by PRAWAT-DS

  Folks/Mates, I need some advise and assistance regarding the testing of Hyper-V. Here is my h/ware configuration: 1) Intel i5 processor (i5-750) 2) Intel M/B DP55WB 3) 6 GB DDR3 RAM OS = Server 2008 R2 Standart (evaluation copy). I installed 2008 r2 on my machine and added hyper-v role to it. I created 2 VMs and installed OS. But after finishing the OS installation the VMs are not booting up. After finishing the OS installation, the VM reboots automatically (normal behaviour) and shows "preparing your system for first time" after that it reboots and didn't come online. Few things to notice, when I am running "securable" on my server 2008 R2 OS it shows that processor is not supporting h/ware virtulization, but (since my desktop is dual boot) when I am running "securable" on my windows 7 OS, it shows that process "does" supports hardware virtulization. VT option is already enabled in BIOS. Any help and suggestions are highly appreciated :) Thanks in advance. Pradeep Rawat

  Read the article

• How to subscribe to a youtube feed from linux command line?

  - by Tim

  I want to subscribe to a youtube channel and automatically download new videos to my linux machine. I know I could do this e.g. with miro, but I will not watch the videos using Miro, want to choose the quality and would like to run it as a cronjob. It should be able to: know which feed entries are new and not download old entries resume (or at least redownload) failed/incomplete downloads from older sessions Are there any complete solutions for this? If not it would be enough for me (maybe even preferable) to just have a command line rss reader that remembers which entries have already been there and writes the new video urls (e.g. http://www.youtube.com/watch?v=FodYFMaI4vQ&feature=youtube_gdata from http://gdata.youtube.com/feeds/api/users/tedxtalks/uploads) into a file. I could then accomplish the rest using a bash script and youtube-dl. What would be programs usable for this purpose?

  Read the article

• Macbook Pro Multiple Monitor Problem

  - by thinksocrates

  I have been using a Macbook pro (newest model) for about 4 weeks with dual monitors. It has been working great using the mac adaptor to dvi. Today however, my mac will not recognize it's built in monitor while the second monitor is plugged in. Plug in second monitor The screen on the laptop goes dark. The second monitor acts as the main screen. Click "Detect displays". Nothing happens Unplug the second monitor Screen on the laptop comes on. Any thoughts?

  Read the article

• Slowdown after repeated hibernation in XP SP3

  - by John

  I have a Dell laptop w/dual core and 4 gigs of memory. Recently my machine has started to go off in never never land for 5 to 20 minutes at a time with a lot of hard drive churning. Eventually it comes back and everything operates properly. If I manage to have task manager up CPU usage shows no more then 3 to 5% during this process. I am on a corporate network and have very good virus protection in place. The problem seems to have increased in frequency since I let an update happen to IE8 and/or I started using hibernate more frequently. Any ideas or suggestions? TIA J

  Read the article

• Increase data transfer speed through bonding/lacp?

  - by Matteo

  I want to maximize the throughput of a data transfer between two servers. The copy will be made at the application layer using Robocopy. To clear things up, please check my Visio schema of the network: FS1---------(SW1)===========(SW2)--------- FS2 SW1 to SW2 is connected through 10 gigabit Fiber Channel ethernet FS1 to SW1 is connected through 1 gigabit ethernet FS2 to SW2 is connected through 1 gigabit ethernet I first idea I've come up with is to use LACP, so I could use two Gigabit Ethernet between each server and the switch. A collegue told me that LACP is for availability and not performance, so he reckon this solution will not work. Is he right? Do I have other options? Thank you very much

  Read the article

• RTL8168B/8111B Lan card is not detected in RHEL5.1..Not finding Linux software that

  - by Deepak Narwal

  Hello friends... In My computer Lan card model is Realtek RTL8168B/8111B PCI-E GIGABIT ETHERNET NIC (NDIS 6.20) My system is dual boot windows 7 and redhat 5.1 Now windows 7 automatically detected this lan card but in redhat lan card is not detected.I have tried to through evrywhere like network or through neat-tui but it is not showing lan card.. I tried google also but all of them providing windows software for this lan card . So please anyone can tell me the link so that i can download drivers for this and can use internet there.. Thanks a lot in advance Deepak Narwal

  Read the article

• Problem with xvideoservice thief

  - by Nrew

  Xvideo service thief is an application that allows you to download and convert youtube videos into .avi format. The problem is when it tries to convert the .flv into a .avi. The audio in the video is not being played when you try to play the video. But the .flv works fine. I have also enabled Intel(R) speedstep feature in my processor(Pentium Dual core E5200) to decrease the power consumed by the processor with the help of Granola software. What might be the reason for the audio less video converter by xvideo service thief? Could it be the enabling of intel(R) speedstep? Because the software works fine when its not enabled. Is this possible?That the output some applications can be altered when enabling this processor feature?

  Read the article

• Windows 7 x64 Pro not indexing PDF content ?

  - by Wookai

  In an attemp to get rid of all the paper clutter that I receive each day, I started scanning and ORCing all my important documents last year. I was using Windows Desktop Search on Vista to index my "Administrative" folder in which I keep all these scanned documents, to be able to quickly retreive them when needed. I upgraded to Windows 7 RTM recently (I got the x64 Pro version, via the MSDN-AA channel of my university). Since then, it seems that the content of the PDFs is not indexed anymore. For example, I have the warranty for my GTX260 graphic card. In the PDF, using Acrobat Reader, I can search for the string "GTX260" and it finds the relevant lines. However, if I perform the same search in the folder containing the PDF, nothing is found. I checked in the indexing options, the folder is supposed to be indexed.

  Read the article

• USB DVD Drive not recognised in Windows 7

  - by Kieron

  I have an external DVD drive (USB) which I'm trying to attach to a notebook but it's not recognised by Windows 7. I can see the device in the control panel, says it's working properly but doesn't show up in the explorer window so can't access it. I've got a dual boot with Ubuntu and it shows up fine in there, no problems so I know the drive and connection are fine. Have tried the upper and lower filters but no success. Thanks for any help you can provide.

  Read the article

< Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >