Search Results

Search found 9758 results on 391 pages for 'wireless networking'.

Page 143/391 | < Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >

• why is port 500 in use and how can I free it? VPNC error

  - by kirill_igum

  i tried to use network manager to connect to my university's vpn; it didn't work. then i used a command line vpnc: > sudo vpnc [sudo] password for kirill: Enter IPSec gateway address: vpn.net.**.edu Enter IPSec ID for vpn.net.**.edu: ** Enter IPSec secret for **@vpn.net.**.edu: Enter username for vpn.net.**.edu: ** Enter password for **@vpn.net.**.edu: vpnc: Error binding to source port. Try '--local-port 0' Failed to bind to 0.0.0.0:500: Address already in use then i did this: sudo vpnc --local-port 0 with the same config and it all worked. i'd like to be able to use network manager gui to connect to vpn. I wanted to find out which program uses the port 500: > sudo netstat -a |grep 500 tcp 0 0 *:17500 *:* LISTEN udp 0 0 *:4500 *:* udp 0 0 *:17500 *:* unix 3 [ ] STREAM CONNECTED 63500 unix 3 [ ] STREAM CONNECTED 12500 @/tmp/.X11-unix/X0 there is nothing that uses 500 i'm using ubuntu 10.10 on thinkpad x201t

  Read the article

• Windows 2003 VM, not connecting to VM Network

  - by TheWellington

  I am running VMware's vSphere infrastructure. I have a windows 2003 VM that is suddenly not connected to the network. I can log into vSphere and see that the VM is running, but it does not connect to the VM network. The firewall on this VM is not running. The network adapter in the VM is configured correctly. The only evidence I see indicating an issue is in the event viewer. I have the following entry. Source: VMUpgradeHelper EventID: 270 Description: Not restoring network configuration for adapter with MAC address 00:50:56:xx:xx:xx. The device ID for this adapter is unchanged. THis VM is a webserver, and it was working beautifully just two days ago. "nothing" has happened... so I am at a loss as to what may have happened. Ideas??

  Read the article

• DNS lookup failed --- dig: couldn't get address for 'ns1.p34.dynect.net': failure

  - by Udit Gupta

  I am a Network Admin from India, managing a large University Network of more than 15000 users. Here goes my problem - My DNS is unable to get ip address for ns1.p34.dynect.net. when i use dig +trace twitter.com on my DNS Server i get this messages:- dig: couldn't get address for 'ns1.p34.dynect.net': failure and this is happening with all those sites listed with dynect.net like twitter,linkedin,quora etc. Find the attached screen shot for the same message. Right now I have temporally fixed (not actually fixed) the problem using Google DNS (8.8.8.8) What could be the issue as It is able to resolve all other sites perfectlly. Thanks Edit: As suggested in answer, I am attaching one more screen shot.

  Read the article

• Cannot determine ethernet address for proxy ARP on PPTP

  - by Linux Intel

  I installed pptp server on a centos 6 64bit server PPTP Server ip : 55.66.77.10 PPTP Local ip : 10.0.0.1 Client1 IP : 10.0.0.60 centos 5 64bit Client2 IP : 10.0.0.61 centos5 64bit PPTP Server can ping Client1 And client 1 can ping PPTP Server PPTP Server can ping Client2 And client 2 can ping PPTP Server The problem is client 1 can not ping Client 2 and i get this error also on PPTP server error log Cannot determine ethernet address for proxy ARP Ping from Client2 to Client1 PING 10.0.0.60 (10.0.0.60) 56(84) bytes of data. --- 10.0.0.60 ping statistics --- 6 packets transmitted, 0 received, 100% packet loss, time 5000ms route -n on PPTP Server Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.60 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 10.0.0.61 0.0.0.0 255.255.255.255 UH 0 0 0 ppp1 55.66.77.10 0.0.0.0 255.255.255.248 U 0 0 0 eth0 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0 0.0.0.0 55.66.77.19 0.0.0.0 UG 0 0 0 eth0 route -n On Client 1 Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 55.66.77.10 70.14.13.19 255.255.255.255 UGH 0 0 0 eth0 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth1 0.0.0.0 70.14.13.19 0.0.0.0 UG 0 0 0 eth0 route -n On Client 2 Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 55.66.77.10 84.56.120.60 255.255.255.255 UGH 0 0 0 eth1 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0 0.0.0.0 84.56.120.60 0.0.0.0 UG 0 0 0 eth1 cat /etc/ppp/options.pptpd on PPTP server ############################################################################### # $Id: options.pptpd,v 1.11 2005/12/29 01:21:09 quozl Exp $ # # Sample Poptop PPP options file /etc/ppp/options.pptpd # Options used by PPP when a connection arrives from a client. # This file is pointed to by /etc/pptpd.conf option keyword. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 and the kernel MPPE module. ############################################################################### # Authentication # Name of the local system for authentication purposes # (must match the second field in /etc/ppp/chap-secrets entries) name pptpd # Strip the domain prefix from the username before authentication. # (applies if you use pppd with chapms-strip-domain patch) #chapms-strip-domain # Encryption # (There have been multiple versions of PPP with encryption support, # choose with of the following sections you will use.) # BSD licensed ppp-2.4.2 upstream with MPPE only, kernel module ppp_mppe.o # {{{ refuse-pap refuse-chap refuse-mschap # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. require-mschap-v2 # Require MPPE 128-bit encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) require-mppe-128 # }}} # OpenSSL licensed ppp-2.4.1 fork with MPPE only, kernel module mppe.o # {{{ #-chap #-chapms # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. #+chapms-v2 # Require MPPE encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) #mppe-40 # enable either 40-bit or 128-bit, not both #mppe-128 #mppe-stateless # }}} # Network and Routing # If pppd is acting as a server for Microsoft Windows clients, this # option allows pppd to supply one or two DNS (Domain Name Server) # addresses to the clients. The first instance of this option # specifies the primary DNS address; the second instance (if given) # specifies the secondary DNS address. #ms-dns 10.0.0.1 #ms-dns 10.0.0.2 # If pppd is acting as a server for Microsoft Windows or "Samba" # clients, this option allows pppd to supply one or two WINS (Windows # Internet Name Services) server addresses to the clients. The first # instance of this option specifies the primary WINS address; the # second instance (if given) specifies the secondary WINS address. #ms-wins 10.0.0.3 #ms-wins 10.0.0.4 # Add an entry to this system's ARP [Address Resolution Protocol] # table with the IP address of the peer and the Ethernet address of this # system. This will have the effect of making the peer appear to other # systems to be on the local ethernet. # (you do not need this if your PPTP server is responsible for routing # packets to the clients -- James Cameron) proxyarp # Normally pptpd passes the IP address to pppd, but if pptpd has been # given the delegate option in pptpd.conf or the --delegate command line # option, then pppd will use chap-secrets or radius to allocate the # client IP address. The default local IP address used at the server # end is often the same as the address of the server. To override this, # specify the local IP address here. # (you must not use this unless you have used the delegate option) #10.8.0.100 # Logging # Enable connection debugging facilities. # (see your syslog configuration for where pppd sends to) debug # Print out all the option values which have been set. # (often requested by mailing list to verify options) #dump # Miscellaneous # Create a UUCP-style lock file for the pseudo-tty to ensure exclusive # access. lock # Disable BSD-Compress compression nobsdcomp # Disable Van Jacobson compression # (needed on some networks with Windows 9x/ME/XP clients, see posting to # poptop-server on 14th April 2005 by Pawel Pokrywka and followups, # http://marc.theaimsgroup.com/?t=111343175400006&r=1&w=2 ) novj novjccomp # turn off logging to stderr, since this may be redirected to pptpd, # which may trigger a loopback nologfd # put plugins here # (putting them higher up may cause them to sent messages to the pty) cat /etc/ppp/options.pptp on Client1 and Client2 ############################################################################### # $Id: options.pptp,v 1.3 2006/03/26 23:11:05 quozl Exp $ # # Sample PPTP PPP options file /etc/ppp/options.pptp # Options used by PPP when a connection is made by a PPTP client. # This file can be referred to by an /etc/ppp/peers file for the tunnel. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 or later from http://ppp.samba.org/ # and the kernel MPPE module available from the CVS repository also on # http://ppp.samba.org/, which is packaged for DKMS as kernel_ppp_mppe. ############################################################################### # Lock the port lock # Authentication # We don't need the tunnel server to authenticate itself noauth # We won't do PAP, EAP, CHAP, or MSCHAP, but we will accept MSCHAP-V2 # (you may need to remove these refusals if the server is not using MPPE) refuse-pap refuse-eap refuse-chap refuse-mschap # Compression # Turn off compression protocols we know won't be used nobsdcomp nodeflate # Encryption # (There have been multiple versions of PPP with encryption support, # choose which of the following sections you will use. Note that MPPE # requires the use of MSCHAP-V2 during authentication) # # Note that using PPTP with MPPE and MSCHAP-V2 should be considered # insecure: # http://marc.info/?l=pptpclient-devel&m=134372640219039&w=2 # https://github.com/moxie0/chapcrack/blob/master/README.md # http://technet.microsoft.com/en-us/security/advisory/2743314 # http://ppp.samba.org/ the PPP project version of PPP by Paul Mackarras # ppp-2.4.2 or later with MPPE only, kernel module ppp_mppe.o # If the kernel is booted in FIPS mode (fips=1), the ppp_mppe.ko module # is not allowed and PPTP-MPPE is not available. # {{{ # Require MPPE 128-bit encryption #require-mppe-128 # }}} # http://mppe-mppc.alphacron.de/ fork from PPP project by Jan Dubiec # ppp-2.4.2 or later with MPPE and MPPC, kernel module ppp_mppe_mppc.o # {{{ # Require MPPE 128-bit encryption #mppe required,stateless # }}} IPtables is stopped on clients and server, Also net.ipv4.ip_forward = 1 is enabled on PPTP Server. How can i solve this problem .?

  Read the article

• Network Error: no buffer space available

  - by braindump

  After some time of running fine, one of our Windows XP SP3 machines does not open some(!) new TCP/IP connections anymore. Putty says "Network Error: no buffer space available", IE won't open any new connections but e.g. network drive mappings still work, even new ones can be established. netstat does not show more open connections that usual, ping and dns lookups work fine. Any hints?

  Read the article

• How do I connect two computers with a LAN cabel?

  - by John

  I have two machines - Windows XP and a laptop using Windows 7. I connected them with a WLAN cable. On the Windows XP machine, I set the IP address to 192.168.0.10. On the Windows 7 laptop, I set the IP address to 192.168.0.20. The laptop can see the Windows XP machine, but Windows XP machine cannot see the Windows 7 machine. But this does NOT concern me. I want to move the files from my desktop (Windows XP) to Windows 7 (laptop). That's why I'm going through all this. The problem is that when I try to connect from Windows 7 to Windows XP machine, I get this window: I don't understand what username/password is needed. I use none on the Windows XP machine. I tried all usernames - no success. Please explain in deep details how to solve my problem so I can connect to my Windows XP machine. EDIT: Maybe this can help: the Windows XP machine is named 'I' and '???????? III' is the name of the laptop. Both computers share one workgroup - WORKGROUP.

  Read the article

• Diagnosing permission problems with Cobian Backup to network share

  - by DaveBurns

  I'm running the latest Cobian 11. I have a Synology DS412 NAS. All of my machines (Mac and Windows) access this just fine when I'm logged in and I browse to it manually. I have Cobian installed as a service on two Windows machines: WinXP SP3 and Win7 x64. On both machines, the service is set to log on with my user account which is in the Windows administrator group. Backups on both machines fail with the message "Couldn't create the destination directory "\nas1\backups\foo\bar\": The filename, directory name, or volume label syntax is incorrect". I have tried setting the NAS's share to allow anonymous read/write access but it made no difference. Although I want the backups to run unattended in the middle of the night, I have tested them by running them manually while I'm logged in but no luck. Before starting that, I make sure that I can browse to the NAS with Explorer to ensure that any authentication session with Windows and the NAS has not expired. Still no luck. I have tried creating that destination directory both on the NAS before the backup and deleting it so the backup job could create it with the client's credentials but no luck. The usual answer in the Cobian support forums is that there is a permission problem. I agree. But at this point, what can I do to diagnose this further?

  Read the article

• iftop - how to generate text file with its output?

  - by mickula

  iftop is great tool to view almost live bandwidth usage distinguished by source-ip source-port destination-ip destination port. I'm using it to see which client's ip is using most bandwidth. Now I would like to store output somewhere. iftop uses ncurses so iftop > log.txt does not work as expected, result file is not readable. Is there any tool like this which can be used to pipe output to a text file? Thanks for your replies.

  Read the article

• Testing radius server from Mac OS X client

  - by Calvin Froedge

  I have a radius server set up on a server running Ubuntu 11.04. I have configured my switch to use the authentication server's IP (192.168.1.2) for RADIUS / 802.1x authentication, and I created a connection to test connecting from my Mac OSX client. Here is my radius configuration for the client: client 192.168.1.0/16 { secret = testing123 } I can successfully authenticate using both 127.0.0.1 (localhost) and 192.168.1.2 (ip of eth1), so I know radius is getting those requests. I set up a connection to test from my macbook, and my requests are timing out. http://screencast.com/t/tMhRLS3H7 Is there a better way to test the radius connection from my macbook? Thanks! UPDATE: I was able to successfully test on Mac OSX client using RadPerf. This is available as a cross-platform command line tool.

  Read the article

• DD-WRT Linksys WRT320N Max Tx Power

  - by Peter Stegnar

  What is the save max Tx Power setting for WRT320N?

  Read the article

• Import PCF file in Windows 7 VPN connection

  - by Prashant

  I have got PCF file for VPN connection from my client to login into there network. I can able to us it with Cisco client without any problem, but I noticed there is option in Window 7 for connection to VPN natively and I'm could not able figure out how to import PCF file content to it. I really appreciate if any one can help with this...

  Read the article

• Error 0x6ba (RPC server is unavailable) when running sfc /scannow on Windows XP in Safe Mode

  - by leeand00

  I think that my mup.sys file is corrupt. I received the following error when trying to access a network share that was located on my Windows 7 box, from my Windows XP box: No network provider accepted the given network path. After reading this I attempted to follow the directions by rebooting my computer into safe mode. After I run "sfc /scannow" I receive the following error message: The specific error code is 0x000006ba [The RPC server is unavailable]. When I go into Services, it says that the Remote Procedure Call (RPC) service is running but that the Remote Procedure Call (RPC) Locator is not running. When I try to start the Remote Procedure Call (RPC) Locator, it gives me an error saying: Error 1084: This service cannot be started in Safe Mode What can I do about this? If it can't find the Remote Procedure Call service in safe mode?

  Read the article

• Buffalo TeraStation Firmware Upgrade

  - by jason

  Hi All, I was given a TeraStation HS-DH0.0TGL/R5 It came to me working with 4x250gb. I added 4 x 1TB, TFTP booted and data was copied. How do I load firmware and software now to get it running? I was going based upon this article: http://forums.buffalotech.com/t5/Storage/FAQ-3-of-3-TFTP-boot-procedure-please-read-this/m-p/11015 I downloaded TFTP Boot Recovery HS-DHTGL-R5 2.13.exe and Terastation_112-104.zip Advice is appreciated.

  Read the article

• MS Windows Server 2008R2 slow file copy, slow network connection

  - by MattrixHax

  i just setup a windows 2008R2 standard server, with the only installed app being Hyper-V, and only 1 windows XP VM is running. Whenever i try to copy a file from my windows 7 laptop over to the 2008R2 server machine's admin shares ( \\servername\c$ ) the files start transferring around 60mb/s and then drop to around 5mb/s. My windows 7 machine and the server 2008 machine are both in WORKGROUP (no domain here). when i try the same transfer to our server 2003 box the transfer speeds are fine. tried disabling autotuning (netsh interface tcp set global autotuninglevel=disabled) as well as turning off the checksum offload to the adapter (tx and rx) - i still see strange packet errors (bad header checksum) using wireshark and just cannot seem to track down what the issue is - over 1 hour to transfer 4gb of files from 1 server to another that are on the same GB switch is just crazy.... any ideas would be greatly appreciated!

  Read the article

• Changing network type from Unidentified network to Private network on an OpenVPN connection

  - by Filip Ekberg

  Is it possible to change the connection type in Windows 7? I have a OpenVPN connection which is identified as "unidentified network" and I do not want to apply certain rules to all unidentified networks in the firewall. How does one conquer this?

  Read the article

• Watchguard config, drop-in or mixed-routing mode?

  - by vfilby

  I have a Watchguard XTM 2 that is currently acting as a firewall and a router for my business network, I currently have the WG setup in mixed-routing mode and am happy with the current configuration. The reason I am curious about drop-in mode is because I would like to use all the interfaces on the back of the watchguard for the same subnet. My understanding is that drop-in mode will put them all on the same subnet, but it is unclear from the manual that the routing/firewall/vpn will still work as expected. This WG is right behind a DSL modem that is setup in bridge mode, so the WG is handling all PPPoE auth and routing for the network.

  Read the article

• Windows Server 2003 can't see Vista machine

  - by Django Reinhardt

  Hi there, I've got a real PITA problem that I'm sure has a really simple solution. I have a Windows Server 2003 machine that needs to be able to see the network name of a Vista box - but refuses to. It can see the Vista box (and even access its shared folder) if I enter the Vista box's IP address. Problem is: SQL Server refuses to do Replication with anything other than the "actual server name". That means that the 2003 machine needs to be able to connect through the Vista machines network name... not just its IP address. I'm guessing it's a simple incompatibility between OS's, but I'm sure there's got to be a simple way of fixing it. Note: Yes, the Vista machine can connect to 2003 machine, no problem. And other machines in the office can connect to both the Vista machine and 2003 (they have more recent OS's). Thanks for any help!

  Read the article

• SSL / HTTP / No Response to Curl

  - by Alex McHale

  I am trying to send commands to a SOAP service, and getting nothing in reply. The SOAP service is at a completely separate site from either server I am testing with. I have written a dummy script with the SOAP XML embedded. When I run it at my local site, on any of three machines -- OSX, Ubuntu, or CentOS 5.3 -- it completes successfully with a good response. I then sent the script to our public host at Slicehost, where I fail to get the response back from the SOAP service. It accepts the TCP socket and proceeds with the SSL handshake. I do not however receive any valid HTTP response. This is the case whether I use my script or curl on the command line. I have rewritten the script using SOAP4R, Net::HTTP and Curb. All of which work at my local site, none of which work at the Slicehost site. I have tried to assemble the CentOS box as closely to match my Slicehost server as possible. I rebuilt the Slice to be a stock CentOS 5.3 and stock CentOS 5.4 with the same results. When I look at a tcpdump of the bad sessions on Slicehost, I see my script or curl send the XML to the remote server, and nothing comes back. When I look at the tcpdump at my local site, I see the response just fine. I have entirely disabled iptables on the Slice. Does anyone have any ideas what could be causing these results? Please let me know what additional information I can furnish. Thank you! Below is a wire trace of a sample session. The IP that starts with 173 is my server while the IP that starts with 12 is the SOAP server's. No. Time Source Destination Protocol Info 1 0.000000 173.45.x.x 12.36.x.x TCP 36872 > https [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=137633469 TSER=0 WS=6 Frame 1 (74 bytes on wire, 74 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 0, Len: 0 No. Time Source Destination Protocol Info 2 0.040000 12.36.x.x 173.45.x.x TCP https > 36872 [SYN, ACK] Seq=0 Ack=1 Win=8760 Len=0 MSS=1460 Frame 2 (62 bytes on wire, 62 bytes captured) Ethernet II, Src: Dell_fb:49:a1 (00:21:9b:fb:49:a1), Dst: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6) Internet Protocol, Src: 12.36.x.x (12.36.x.x), Dst: 173.45.x.x (173.45.x.x) Transmission Control Protocol, Src Port: https (443), Dst Port: 36872 (36872), Seq: 0, Ack: 1, Len: 0 No. Time Source Destination Protocol Info 3 0.040000 173.45.x.x 12.36.x.x TCP 36872 > https [ACK] Seq=1 Ack=1 Win=5840 Len=0 Frame 3 (54 bytes on wire, 54 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 1, Ack: 1, Len: 0 No. Time Source Destination Protocol Info 4 0.050000 173.45.x.x 12.36.x.x SSLv2 Client Hello Frame 4 (156 bytes on wire, 156 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 1, Ack: 1, Len: 102 Secure Socket Layer No. Time Source Destination Protocol Info 5 0.130000 12.36.x.x 173.45.x.x TCP [TCP segment of a reassembled PDU] Frame 5 (1434 bytes on wire, 1434 bytes captured) Ethernet II, Src: Dell_fb:49:a1 (00:21:9b:fb:49:a1), Dst: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6) Internet Protocol, Src: 12.36.x.x (12.36.x.x), Dst: 173.45.x.x (173.45.x.x) Transmission Control Protocol, Src Port: https (443), Dst Port: 36872 (36872), Seq: 1, Ack: 103, Len: 1380 Secure Socket Layer No. Time Source Destination Protocol Info 6 0.130000 173.45.x.x 12.36.x.x TCP 36872 > https [ACK] Seq=103 Ack=1381 Win=8280 Len=0 Frame 6 (54 bytes on wire, 54 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 103, Ack: 1381, Len: 0 No. Time Source Destination Protocol Info 7 0.130000 12.36.x.x 173.45.x.x TLSv1 Server Hello, Certificate, Server Hello Done Frame 7 (1280 bytes on wire, 1280 bytes captured) Ethernet II, Src: Dell_fb:49:a1 (00:21:9b:fb:49:a1), Dst: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6) Internet Protocol, Src: 12.36.x.x (12.36.x.x), Dst: 173.45.x.x (173.45.x.x) Transmission Control Protocol, Src Port: https (443), Dst Port: 36872 (36872), Seq: 1381, Ack: 103, Len: 1226 [Reassembled TCP Segments (2606 bytes): #5(1380), #7(1226)] Secure Socket Layer No. Time Source Destination Protocol Info 8 0.130000 173.45.x.x 12.36.x.x TCP 36872 > https [ACK] Seq=103 Ack=2607 Win=11040 Len=0 Frame 8 (54 bytes on wire, 54 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 103, Ack: 2607, Len: 0 No. Time Source Destination Protocol Info 9 0.130000 173.45.x.x 12.36.x.x TLSv1 Client Key Exchange, Change Cipher Spec, Encrypted Handshake Message Frame 9 (236 bytes on wire, 236 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 103, Ack: 2607, Len: 182 Secure Socket Layer No. Time Source Destination Protocol Info 10 0.190000 12.36.x.x 173.45.x.x TLSv1 Change Cipher Spec, Encrypted Handshake Message Frame 10 (97 bytes on wire, 97 bytes captured) Ethernet II, Src: Dell_fb:49:a1 (00:21:9b:fb:49:a1), Dst: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6) Internet Protocol, Src: 12.36.x.x (12.36.x.x), Dst: 173.45.x.x (173.45.x.x) Transmission Control Protocol, Src Port: https (443), Dst Port: 36872 (36872), Seq: 2607, Ack: 285, Len: 43 Secure Socket Layer No. Time Source Destination Protocol Info 11 0.190000 173.45.x.x 12.36.x.x TLSv1 Application Data Frame 11 (347 bytes on wire, 347 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 285, Ack: 2650, Len: 293 Secure Socket Layer No. Time Source Destination Protocol Info 12 0.190000 173.45.x.x 12.36.x.x TCP [TCP segment of a reassembled PDU] Frame 12 (1514 bytes on wire, 1514 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 578, Ack: 2650, Len: 1460 Secure Socket Layer No. Time Source Destination Protocol Info 13 0.450000 12.36.x.x 173.45.x.x TCP https > 36872 [ACK] Seq=2650 Ack=578 Win=64958 Len=0 Frame 13 (54 bytes on wire, 54 bytes captured) Ethernet II, Src: Dell_fb:49:a1 (00:21:9b:fb:49:a1), Dst: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6) Internet Protocol, Src: 12.36.x.x (12.36.x.x), Dst: 173.45.x.x (173.45.x.x) Transmission Control Protocol, Src Port: https (443), Dst Port: 36872 (36872), Seq: 2650, Ack: 578, Len: 0 No. Time Source Destination Protocol Info 14 0.450000 173.45.x.x 12.36.x.x TCP [TCP segment of a reassembled PDU] Frame 14 (206 bytes on wire, 206 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 2038, Ack: 2650, Len: 152 No. Time Source Destination Protocol Info 15 0.510000 12.36.x.x 173.45.x.x TCP [TCP Dup ACK 13#1] https > 36872 [ACK] Seq=2650 Ack=578 Win=64958 Len=0 Frame 15 (54 bytes on wire, 54 bytes captured) Ethernet II, Src: Dell_fb:49:a1 (00:21:9b:fb:49:a1), Dst: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6) Internet Protocol, Src: 12.36.x.x (12.36.x.x), Dst: 173.45.x.x (173.45.x.x) Transmission Control Protocol, Src Port: https (443), Dst Port: 36872 (36872), Seq: 2650, Ack: 578, Len: 0 No. Time Source Destination Protocol Info 16 0.850000 173.45.x.x 12.36.x.x TCP [TCP Retransmission] [TCP segment of a reassembled PDU] Frame 16 (1514 bytes on wire, 1514 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 578, Ack: 2650, Len: 1460 Secure Socket Layer No. Time Source Destination Protocol Info 17 1.650000 173.45.x.x 12.36.x.x TCP [TCP Retransmission] [TCP segment of a reassembled PDU] Frame 17 (1514 bytes on wire, 1514 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 578, Ack: 2650, Len: 1460 Secure Socket Layer No. Time Source Destination Protocol Info 18 3.250000 173.45.x.x 12.36.x.x TCP [TCP Retransmission] [TCP segment of a reassembled PDU] Frame 18 (1514 bytes on wire, 1514 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 578, Ack: 2650, Len: 1460 Secure Socket Layer No. Time Source Destination Protocol Info 19 6.450000 173.45.x.x 12.36.x.x TCP [TCP Retransmission] [TCP segment of a reassembled PDU] Frame 19 (1514 bytes on wire, 1514 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 578, Ack: 2650, Len: 1460 Secure Socket Layer

  Read the article

• better tool than netstat

  - by Stan

  OS: Windows server/ Windows XP Is there any port scan tool that can do what netstat does and also has a filter feature? So unnecessary connections can be hide. Thanks.

  Read the article

• IIS7 Network Bios command limit and disabling file change notifications.

  - by meandmycode

  Having experienced IIS for many years I've hit this error various times in the past, and understand it, the gist being IIS is attempting to setup so many file change notifications over a UNC share that it is hitting a specified limit of active commands. However, whilst I understand this is a registry change on the endpoints, in our internal network we're starting to hit this when running certain domains that have large content (and the content is then stored out of source control and instead on a dumb network store). Given this is a testing environment and rather than changing registry settings (which may not even work for client (dev) machines that run Vista IIS), I'd like to stop IIS setting up all these file change notifications. Is this possible to do on a per site basis? additionally the configuration can't be in the web.config, if this means having to disable FCN's for the entire IIS server this would be preferred. Thanks in advance.

  Read the article

• Let other computer view my localhost over a network...

  - by Smickie

  Hi, I have apache and what not running on my local machine (mac), there also another mac on the local network. How does this other machine access my localhost? For example I have a local website at example.local.net in my vhost. How can another computer on the network navigate to this site? Cheers!

  Read the article

• NFS to NFS mount

  - by dude

  I have a machine that I need to bridge NFS files to. Can I mount an NFS directory on machine2 from machine1 and then mount the mounted NFS directory on machine2 on machine3 via NFS? Do you see any problems with that? I am basically bridging some subnet domains this way, in a certain fashion. My development machine is on a different and separate (unbridged) than where I would like to use the files, and I would like this machine1(dev machine) - machine2(passthrough machine) - machine3(test machine) connection. And no there is no way to move the test machine as it's a chassis :) and it's two buildings away.

  Read the article

• What does it mean when ARP shows <incomplete> on eth1

  - by Geoff Dalgas

  We have been using HAProxy along with heartbeat from the Linux-HA project. We are using two linux instances to provide a failover. Each server has with their own public IP and a single IP which is shared between the two using a virtual interface (eth1:1) at IP: 69.59.196.211 The virtual interface (eth1:1) IP 69.59.196.211 is configured as the gateway for the windows servers behind them and we use ip_forwarding to route traffic. We are experiencing an occasional network outage on one of our windows servers behind our linux gateways. HAProxy will detect the server is offline which we can verify by remoting to the failed server and attempting to ping the gateway: Pinging 69.59.196.211 with 32 bytes of data: Reply from 69.59.196.220: Destination host unreachable. Running arp -a on this failed server shows that there is no entry for the gateway address (69.59.196.211): Interface: 69.59.196.220 --- 0xa Internet Address Physical Address Type 69.59.196.161 00-26-88-63-c7-80 dynamic 69.59.196.210 00-15-5d-0a-3e-0e dynamic 69.59.196.212 00-21-5e-4d-45-c9 dynamic 69.59.196.213 00-15-5d-00-b2-0d dynamic 69.59.196.215 00-21-5e-4d-61-1a dynamic 69.59.196.217 00-21-5e-4d-2c-e8 dynamic 69.59.196.219 00-21-5e-4d-38-e5 dynamic 69.59.196.221 00-15-5d-00-b2-0d dynamic 69.59.196.222 00-15-5d-0a-3e-09 dynamic 69.59.196.223 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 225.0.0.1 01-00-5e-00-00-01 static On our linux gateway instances arp -a shows: peak-colo-196-220.peak.org (69.59.196.220) at <incomplete> on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-222.peak.org (69.59.196.222) at 00:15:5d:0a:3e:09 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 Why would arp occasionally set the entry for this failed server as <incomplete>? Should we be defining our arp entries statically? I've always left arp alone since it works 99% of the time, but in this one instance it appears to be failing. Are there any additional troubleshooting steps we can take help resolve this issue? THINGS WE HAVE TRIED I added a static arp entry for testing on one of the linux gateways which still didn't help. root@haproxy2:~# arp -a peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-221.peak.org (69.59.196.221) at 00:15:5d:00:b2:0d [ether] on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 peak-colo-196-220.peak.org (69.59.196.220) at 00:21:5e:4d:30:8d [ether] PERM on eth1 root@haproxy2:~# arp -i eth1 -s 69.59.196.220 00:21:5e:4d:30:8d root@haproxy2:~# ping 69.59.196.220 PING 69.59.196.220 (69.59.196.220) 56(84) bytes of data. --- 69.59.196.220 ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 6006ms Rebooting the windows web server solves this issue temporarily with no other changes to the network but our experience shows this issue will come back. Swapping network cards and switches I noticed the link light on the port of the switch for the failed windows server was running at 100Mb instead of 1Gb on the failed interface. I moved the cable to several other open ports and the link indicated 100Mb for each port that I tried. I also swapped the cable with the same result. I tried changing the properties of the network card in windows and the server locked up and required a hard reset after clicking apply. This windows server has two physical network interfaces so I have swapped the cables and network settings on the two interfaces to see if the problem follows the interface. If the public interface goes down again we will know that it is not an issue with the network card. (We also tried another switch we have on hand, no change) Changing network hardware driver versions We've had the same problem with the latest Broadcom driver, as well as the built-in driver that ships in Windows Server 2008 R2. Replacing network cables As a last ditch effort we remembered another change that occurred was the replacement of all of the patch cords between our servers / switch. We had purchased two sets, one green of lengths 1ft - 3ft for the private interfaces and another set of red cables for the public interfaces. We swapped out all of the public interface patch cables with a different brand and ran our servers without issue for a full week ... aaaaaand then the problem recurred. Disable checksum offload, remove TProxy We also tried disabling TCP/IP checksum offload in the driver, no change. We're now pulling out TProxy and moving to a more traditional x-forwarded-for network arrangement without any fancy IP address rewriting. We'll see if that helps.

  Read the article

• System error 1219 has occurred

  - by khebbie

  I am trying to connect to a remote server and deploy a service there, through a deploy script. I start by stating "Net use" and send the credentials for the server. But here I get system 1219 error: Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again. I am not aware that I have any connections other than this one to the server. I have tried net "use /delete" but was told that no connections were open to the server. What gives?

  Read the article

• Windows Server: specifying the default IP address when NIC has multiple addresses

  - by Cédric Boivin

  I have a Windows Server which has ~10 IP addresses statically bound. The problem is I don't know how to specify the default IP address. Sometimes when I assign a new address to the NIC, the default IP address changes with the last IP entered in the advanced IP configuration on the NIC. This has the effect (since I use NAT) that the outgoing public IP changes too. Even though this problem is currently on Windows Server 2008, I've had the same problem with a Windows Server 2003. How can you set the default IP address on a NIC when it has multiple IP addresses bound? I remark something. When i check route print i see is it there the problem ? 0.0.0.0 0.0.0.0 192.168.x.x 192.168.99.49 261 if i want the default ip be example : 192.168.99.100 There is my route. Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.99.1 192.168.99.49 261 10.10.10.0 255.255.255.0 On-link 10.10.10.10 261 10.10.10.10 255.255.255.255 On-link 10.10.10.10 261 10.10.10.255 255.255.255.255 On-link 10.10.10.10 261 192.168.99.0 255.255.255.0 On-link 192.168.99.49 261 192.168.99.49 255.255.255.255 On-link 192.168.99.49 261 192.168.99.51 255.255.255.255 On-link 192.168.99.49 261 192.168.99.52 255.255.255.255 On-link 192.168.99.49 261 192.168.99.53 255.255.255.255 On-link 192.168.99.49 261 192.168.99.54 255.255.255.255 On-link 192.168.99.49 261 192.168.99.55 255.255.255.255 On-link 192.168.99.49 261 192.168.99.56 255.255.255.255 On-link 192.168.99.49 261 192.168.99.57 255.255.255.255 On-link 192.168.99.49 261 192.168.99.58 255.255.255.255 On-link 192.168.99.49 261 192.168.99.59 255.255.255.255 On-link 192.168.99.49 261 192.168.99.60 255.255.255.255 On-link 192.168.99.49 261 192.168.99.61 255.255.255.255 On-link 192.168.99.49 261 192.168.99.62 255.255.255.255 On-link 192.168.99.49 261 192.168.99.64 255.255.255.255 On-link 192.168.99.49 261 192.168.99.65 255.255.255.255 On-link 192.168.99.49 261 192.168.99.66 255.255.255.255 On-link 192.168.99.49 261 192.168.99.67 255.255.255.255 On-link 192.168.99.49 261 192.168.99.68 255.255.255.255 On-link 192.168.99.49 261 192.168.99.70 255.255.255.255 On-link 192.168.99.49 261 192.168.99.71 255.255.255.255 On-link 192.168.99.49 261 192.168.99.100 255.255.255.255 On-link 192.168.99.49 261 192.168.99.108 255.255.255.255 On-link 192.168.99.49 261 192.168.99.109 255.255.255.255 On-link 192.168.99.49 261 192.168.99.112 255.255.255.255 On-link 192.168.99.49 261 192.168.99.255 255.255.255.255 On-link 192.168.99.49 261 224.0.0.0 240.0.0.0 On-link 192.168.99.49 261 224.0.0.0 240.0.0.0 On-link 10.10.10.10 261 255.255.255.255 255.255.255.255 On-link 192.168.99.49 261 255.255.255.255 255.255.255.255 On-link 10.10.10.10 261 I need to be certain, when i go on internet i go with the 192.168.99.100 how i do that ?

  Read the article

< Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >