Search Results

Search found 5860 results on 235 pages for '8k of power'.

Page 144/235 | < Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >

• Areca 1880ix RAID hangs

  - by Dave

  Areca RAID controller ARC-1880ix-12 (firmware 1.50) hangs when on high load. My setup is: Chenbro 3U chassis Intel S5500BC mainboard Xeon 5603 CPU 16GB of RAM 12 Seagate SAS drives ST32000645SS (2 of them as hot spare, 10 as RAID10) Mellanox Infiniband HBA card This server is working as external infiniband storage for Xen VMs. When load is quite big Areca's firmware hangs - it becomes unreachable even from Areca's ethernet adapter. After resetting the server power it returns to normal operation. While Areca is hanged I can confirm that it is powered (ethernet link is active) and Infiniband HBA works Ok. Thanks in advance for any idea or suggestion where the problem might be!

  Read the article

• RAID 1 not performing as expected

  - by Faken

  I recently bought a new 320Gb hard drive for my computer to set up RAID 1 on it for some added security. Installation went as smooth as could possibly be (plug in power, plug in data cable, start up computer, Intel software recognized new drive, right click create RAID 1, done!). However, for some inexplicable reason, I seem to have strange test results when using BENCH32. On my old configuration, a single 7200 rpm drive, I achieved about 60 MB/s write and 70 MB/s read. With a new RAID 1 configuration, I would expect the write to be slightly diminished but read to be significantly improved (though not exactly double speed). However, with the new configuration, I am getting 90 MB/s write and only about 80 MB/s read. I should NOT be getting improved write performance, especially NOT better than read! What's going on? My system setup is: q6600 2.4ghz CPU 4Gb DDR2 667mhz RAM on board Intel ICH9R "RAID chip" 2x Seagate 7200 RPM 320GB drives in RAID 1 Widows 7 home premium 64-bit

  Read the article

• PC reboots spontaenously: debugging tips

  - by aaron

  I swapped my core 2 duo for a quad core recently, and generally things run fine, but every now and then my computer just restarts. I don't even get a blue screen (Vista 32). Core temp isn't a problem. My thinking is that my power supply is inadequate, but I haven't been able to test that (one idea was to under clock the cpu to see if that helped, but going up in speed was the only simple thing to do in the BIOS) Two cases where I semi-consistanly get problems: - Borderlands windowed after some period of time (and some other games, but Borderlands does it pretty regularly) - watching a video (e.g. quicktime/vlc) and having another video running Another thought is non-cpu heat? Maybe the graphics card? Any thoughts on how to track this down appreciated. Thanks!

  Read the article

• Computer Locks Up Completely When Resuming From Standby

  - by kcoppock

  Okay, so I'm having a strange issue lately with my desktop, and off the top of my head I'm not sure what the problem is, so I'm hoping for some ideas on how to track down the cause. First, my PC: AMD Phenom 9600 Quad-Core 2.4 GHz 4 GB DDR2 160 GB boot HDD 1 TB & 120 GB secondary HDD Nvidia GeForce 8600 GTS Windows 7 Professional 64-bit I have my power settings as follows: Turn off the display: 10 minutes Turn off hard disk: 20 minutes Sleep after: Never After a while, I'll come back to use my computer again, wiggle the mouse, and the screen comes back on like normal, but the desktop is unresponsive. I can move the cursor, but nothing responds to clicks or keyboard entry. If I click a few times with the mouse, the computer eventually locks up completely and the mouse cursor stops moving as well. After I restart, everything works just fine. Is there a log you recommend checking or really any suggestions would be welcome at this point. Thanks!

  Read the article

• Macbook superdrive got calibration problems

  - by Fractal

  I have an intel macbook dual 2Ghz, bought about three years ago. I've had some problems with the superdrive and changed it a year and a half ago. the drive is Matshita DVD-R UJ 857 now I'm into burning cd's again and try to burn a DVD with Toast Titanium from an .iso on my hard drive But it won't work. When I launch the burn, the disc suddenly stops turning, and an error log pops: medium error, sense code = 0x73, 0x03 then I try with the built in cd burner of the macbook as soon as I click burn, the cd stops turning in the drive, and error log says peripheral couldn't calibrate power of the laser required for medium so since I'm not that logical of a geek, I try my first idea: let's see with other brands of DVD! the problem is that it works, now. but I'd like for all of my medium to be usable, and I've already seen my ridata DVD being burn, so here's the question. What the hell is happening with my superdrive? :)

  Read the article

• Random shut down? Asus N53J Laptopi

  - by Mr.Y

  My Laptop is pretty new and today it random shut down on its own. I was surfing the net and the computer shut down on its own (Like losing power, without any warning). It was the 2nd time, the first time was 3 weeks ago. Btw it happens during cold days. I remember one time I was unable to turn on my laptop at all. So I'm pretty sure it's not related to heat issue... could it be the laptop is too "cold"? My room temperature is around 17=18 degree on average :P edit -I use Windows 7 Professional. -I run memtest86 once and it passed. -I run my laptop WITHOUT battery all the time.

  Read the article

• Software for capturing still image snapshots from video input

  - by cantabilesoftware

  What software is available that will let me watch video from a USB video capture device at full PAL/NTSC resolution and capture a still image at a button press? More info: I'm using a KaiserBaas USB capture device (http://www.kaiserbaas.com/kaiser-baas-product-page/converters/video-to-dvd-maker), and want to capture screen shots from a PS2 connected to it. I'd like to play the game at the full PS2 resolution and capture certain scenes. The device has a one-touch snapshot button on it, but I can't seem to make it work and there's no mention of it anywhere in the documentation. The device works and the video appears in Power Producer (the included software), but I think it previews it smaller than the full resolution. I could print screen it, but having to crop will be a pain.

  Read the article

• How can I reduce the CPU usage of Offline Files?

  - by Diego

  Whenever I have the Offline Files service running, there is a constant 25% CPU usage on svchost.exe (this is a quad core, so that means it's using up one core). This, in turn, triples the power consumption and keeps the machine hot... I do have several GB synchronized (music collection), but they are not changing at all, in either side. Am I misusing this feature? Is there anything I can configure to keep it down when there's nothing to do? Or should I forget about it and synchronize big folders manually?

  Read the article

• How can I use mobile network account at server so home sync works

  - by Mike Gallagher

  I would like to be able to use a mobile network account while sitting at my server. I had os x server 10.6 running on a mac mini server but recently got a new quad core iMac and want to take advantage of the extra power. My problem - I can sit at the server and log into the mobile network account but can not get it to sync back. When I attempt to sync it get error message that the afp share point is unavailable and that the files are hosted locally. My goal is to be able to use the new iMac as the server and set a user account so that it remains synced so when the account is accessed from other clients, particularly my macbook pro. Is mobile account the best route? Would an external account be a better option. Any advice or ideas of where to read up on this would be much appreciated.

  Read the article

• Remote access to BIOS?

  - by j-g-faustus

  I have a home server running headless (i.e. without a monitor), using ssh for remote access. This works fine most of the time, but I still need a graphics card and still need to drag out a monitor whenever I have to access BIOS, (re-)install the OS and similar. I know that there are business servers that let you control everything remotely (over Ethernet), including power up and BIOS access. Is this type of functionality available for "prosumer" class hardware? If so, where does it sit - should I look for motherboard support, a PCI-e card or an external device? And does this type of functionality have a name, so I know what to google for?

  Read the article

• Difficulty racking Proliant G8's

  - by Systemspoet

  We're an all Proliant shop with around 50 servers, mostly DL360s and DL380, from G5's through G7's. We just got our first two G8's in and went to rack them. We were stunned to find out that the new cable management arms protrude almost 1 inch deeper into the rack then previous iterations of the Proliant line. Unfortunately that causes them to occupy the same space as the PDU's in our APC racks. In a non-densely populated section of rack that's no biggie, but in a densely populated section it's impossible to get the cable arm into place without dislodging another machine's power. Has anyone else run into this? Obviously racking machines without cable management arms is not an option. I supposed we could reconfigure our racks but that's a nightmare.

  Read the article

• restrict windows remote desktop

  - by radioactive21

  Is there any way to prevent users from launching and using remote desktop and to restrict it to only local admins or domain admins? The reason being is that we do not want users to remote desktop home, but at the same time we want it to be available to certain users like administrators or power users. Ideally there is a group policy that can be set to groups or users who have access to the remote desktop application from their machine. Clarifications: I need the machine to be able to still have remote desktop work, just only with a specific user or group. The point is that we allow certain users to use remote desktop and others to not have access to it. There are machines where there are multiple users, so we cant just block a whole machine or by IP. This needs to be done per a user account or login.

  Read the article

• Does laser printer use toner when switched on/off?

  - by Alan Harris-Reid

  I have recently purchased a HP LaserJet M175nw laser printer which goes into sleep-mode after 10 minutes of non-use. I know sleep-mode uses a very small amount of power, but the flashing light on the control panel is driving me nuts! I know I can turn-off the printer via. the on/off button, but when it is turned-on manually, there is some whirring sound which I guess might be the machine warming-up. My question is... Is any toner used during this warm-up (or cleaning) cycle? Am I better-off keeping the printer in sleep mode, or is it ok to turn off manually? TIA Alan

  Read the article

• Windows undetectable after interrupted chkdsk

  - by Felthragar

  I have a computer that is running Windows XP. For some reason, the other day it wouldn't start giving me the following message: "ntoskrnl.exe is missing or corrupt" So I put the XP disc in the tray and fired up the repair console and ran the following: chkdsk /r It was on for about eight hours and it got to about 52% I believe. Then there was a power outage and the computer shut down (obviously). Today when I was booting it, it isn't even detecting there's an OS anymore. If I boot the computer with no cd in the tray it says: "Reboot and select a proper Boot device or Insert Boot Media in selected Boot device and press a key" If I run the repair console, or the xp installation program it isn't finding any OS installations. Any ideas on what to do next? Any help is appreciated. Thanks! Update: After turning boot-time diagnostics on, I got this message when booting without cd (instead of the previous one): "Couldn't open drive multi(0)disk(0)rdisk(0)partition(2)"

  Read the article

• How to set Laptop Brightness in Gnome and /proc on Thinkpad W510?

  - by hakre

  I can set the brightness of my laptop screen already via /proc. I can read and change the value. Now I've set the value to 33 and then I went into gnome power management and enabled the option that it should reduce the backlight brightness being on battery. That works, the screen gets darker. If I now read out the current setting from /proc it still says it's 33. So I assume that there is another node in /proc to be used to control the brightness. The node I use so far is: /proc/acpi/video/VID/LCD0/brightness I'm using the nouveau driver. With the nvida driver the brightness can not be controlled.

  Read the article

• Apple Airport Extreme Wireless Card M8881 Connectivity Issue

  - by Carlosfocker

  I bought a Apple Airport Extreme Wireless Card M8881 with the antenna for my old Power Mac G5 1.6 Ghz. The computer is running OS X 10.4. The card works and I can connect to my dlink 802.11g wireless router using WPA2/AES encryption. The problem is that the connection has intermittent connectivity issues. When the issue occurs the signal bars for the connection drop to one or two bars and the performance of the connection suffers greatly. The computer isn't far from the wireless router. I have a laptop at the desk where the mac is and it does not have any issues. I'm not sure what it might be? Updated drivers? Firmware? Let me know if I forgot any important information.

  Read the article

• my laptop ibm thinkpad x32 showing black screen after booting

  - by forweb

  Thanks in advance. Well i have a laptop of IBM thinkpad x32. Windowx xp installed. So, the problem is that: The basic problem is the Black Screen but it's not means that laptop doesn't power-up or boot-up, sometimes after booting, screen will off and notable thing is that after black screen computer is still running all keyboard lights are on, and when i tried to again start it, it will boot ok but after some time screen will gone, and sometimes this happens during booting screen, even sometimes screen black out at win XP user login page, means after some seconds or min screen will gone. Hope you can understand my problem

  Read the article

• Local dedicated hosting space (own hardware)

  - by Scott

  Where can I find local dedicated hosting space for my own hardware? I know I can rent dedicated hosting from various companies online, but usually I think that means I'm renting their hardware too. I just need a space with a network connection and a power outlet. That's it. How much would this cost? What would I search for? Is it available easily? Or would it only be the sort of thing huge companies would do? I'm in the greater NYC area. It's for a project I'm working on, but the thing's loud and annoying. I'd be willing to pay a little to get it out of sight and out of mind. I don't even care too much about the quality of the network connection. I'd rather not rent other people's hardware cause it probably would cost a fortune to rent a machine like this (tons of ram).

  Read the article

• Host hijacks USB printer from VirtualBox machine

  - by jackhab

  I have Ubuntu 9.1 running Windows XP in VirtualBox. Windows XP is a print server (there is no Linux driver for our printer). The printer is connected via USB and its USB filter is added to virtual machine settings. The problem is that every several hours Ubuntu tries to access the printer (trying to install it) and disconnects it from the virtual machine. The printer remains disconnected until I connect it again manually. I thought it is a problem with Windows power management but disabling sleep/standby in Windows didn't help. Please, advise.

  Read the article

• Server 2008 locks me out when not using the machine for 10 minutes after installing SP2

  - by Daniel Magliola

  I have recently installed Service Pack 2 on my Windows Server 2008 machine (which I use actively for development, and i'm always logged on to). Now, after this installation, when I don't use the machine for some time (let's say, 10 minutes), it locks itself so I have to press Ctrl+Alt+Del and log back in. I have already checked the Screen Saver settings, and it's "None", as it always has been. I also looked into power settings and everything looks right (20 mins to turn off monitor, and i haven't found any settings regarding locking me in there). Do you have any idea what I can do so that it won't lock me out after not using the machine for a while? Thanks! Daniel

  Read the article

• Dell PowerEdge 6850 Degraded HDD

  - by Matt

  Good Morning, We have a dell power edge 6850 with a degraded drive in the RAID array. I have never had to recover such an issue, so any help or advice would be welcome. Basically it hasn't affected the server at an operating system level, but has slowed down performance, I have a replacement drive in hand but as this is our main database server I want to proceed with extreme caution. My options as I see them are - Can I just hot swap the degraded drive with the new one and the data will automatically re-sync and we are all back to normal presumably this is dependant on the current raid configuration? reading various comments on-line I may need to re-configure the RAID array and re-build the broken drive? This screams disaster to me with the main worry being that I wipe any other data. Option 1 would of course make my day. Thanks in advance

  Read the article

• Identify "Composite Document File"

  - by Steven

  In a folder containing several PowerPoint Presentations and Spreadsheets, I discovered the following file: Name: ppt115.tmp Size: 160 MB Meta: No EXIF or other metadata Type: (as identified by the cygwin / linux program 'file') Composite Document File V2 Document, No summary info Notes: The filename does not correspond to other files in the directory. Neither MS Power Point nor Excel can open the file. MS Word will only attempt to recover text. Please help me identify this file. Is it just a temporary file that I can safely remove?

  Read the article

• How to charge an iPhone on a Windows PC without Installaing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• Run command before and after printing with CUPS?

  - by leto

  Hello, this is a home setup. A central printer server (Linux) manages the queue, a HP 2430DTN is attached to it via 100Mbit/sec Ethernet. The printer is hooked up to a managable power source. A shell script watches the queue on the server (lpstat -o) and turn on the printer when there is a job. If the queue is empty for 10 minutes it turns the printer off. Now this setup messes up, stops the printer etc. after a couple of weeks and is in general "not so reliable". I now know how to change the stop-printer thing, but: Is there a way to run my turn printer on script and turn printer off script directly from cups without watching the queue? That would be so cool!

  Read the article

• The Shearin Group Real Estate Brokers: Projektets blå Zone i strand byer

  - by user224103

  Jeg kan virkelig godt lide hvad de blå Zone projekt gør: det er folkesundheden initiativledes af strand byer sundhed District, at gøre livet bedre i vores lokale samfund. BlåZone anmoder lokale South Bay beboere til at tænke om genbrug, grøn-levende, ogvirkningen deres handlinger og daglige living har på miljøet og dem omkring dem. Kast begivenheder og kampagner omkring strand byer, og har haft en stor indflydelsepå Hermosa Beach i særdeleshed. For eksempel, holder de en workshop på 18 januar2014 kaldet Power of Purpose på Redondo Beach Performing Arts Center. Workshoppen vil bliver alt om hvordan formål vedrører vores personlige værdier,overbevisninger og prioriteter og køre byKathleen Terry af lederskab fra ManhattanBeach og lederskab Redondo og formand for Manhattan Beach Rotary Club.

  Read the article

< Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >