static block - Page 144

Sharing internet connection from Windows XP using wi-fi router

- by Darius

Hi, I have an network configuration like: Ethernet cable from ISP connected to Windows XP machine, configured with static IP 192.168.0.3 Another ethernet connection from 2nd Windows XP machine's network adapter to a Wi-Fi router (D-Link Airport G+) XP set to "Share internet connection", the 2nd adapter configured as static to 192.169.0.1 D-Link Airport Wi-Fi router also configured as "static connection", it's IP set to 192.169.0.2, default gateway set to 192.169.0.1. Network mask everywhere is 24. Laptop computer connected with the router with static IP 192.169.0.3 The problems are: XP machine sees the router (it's able to ping it and access it via the web admin tool) The router somehow cannot PING the XP machine (using the tool provided by the web-based admin tool) The laptop computer cannot ping anything and cannot be pinged The router is only accessible when the ethernet cable is connected with a router's 1-4 LAN port, when I connect it via "WAN" port (which I believe is the proper one) it's not visible from the XP machine If you have similar experience with configuring a network like this I would really appreciate your help. I cannot use the Wi-Fi router with the ISP cable itself.

Read the article

Oracle Linux Hands-on Lab from your Home? Yes You Can Do That!

- by Zeynep Koch

We're taking the very popular OTN Sysadmin Days and going virtual! We have two days to choose from: Americas - Tuesday January 15th, 2013 9:00 a.m – 1:00 p.m. PT / 12:00 p.m. – 4:00 p.m. ET / 1:00 p.m. - 5:00 p.m. BRT EMEA - Tuesday January 29th, 2013 - 9:00 a.m – 13:00 p.m GMT / 10:00 a.m – 14:00 p,m CET / 12:00 p.m – 16:00 p.m AST / 13:00 p.m – 17:00 p,m MSK / 14:30 p.m – 18:30 p.m IST You'll be able to perform real-world tasks with Oracle Linux and if you have questions you can ask for help from the Oracle experts through chat window. There's one caveat: you'll have to do a little homework ahead of time. Load the virtual images onto your laptop, find the instructions, and make sure everything is working properly. This wiki https://wikis.oracle.com/display/virtualsysadminday/Home explains what you need to do. If you have questions, ask them as comments to the wiki:https://wikis.oracle.com/display/virtualsysadminday/Home. Oracle Linux Track 1. Oracle Linux Technology Overview - In this session we will go over the latest Oracle Linux features including tools for Linux administration such as the Unbreakable Linux Network (ULN) and public yum. We will also show you a demo of Ksplice zero downtime kernel updates, only available to Oracle Linux customers. You will see how easy it is to switch from Red Hat support to Oracle Linux support by using ULN. Last but not least, we’ll introduce the 3 hands-on labs that will follow this session in the Linux track. 2. HOL: Package Management - In this lab session you will use the package management on Oracle Linux using RPM and yum. Some of the tasks that you will experience include listing installed packages, obtaining additional information about packages, searching for packages and installing/updating them as well as verifying package integrity and removing software. We’ll also review Linux services and run levels, how to start and stop them, checking the status of a particular service and enabling a service to be started automatically at system boot. 3. HOL: Storage Management - In this hands-on lab session, you will learn about storage management with LVM2, the Linux Logical Volume Manager, preparing block devices, creating physical and logical volumes, creating file systems on top of logical volumes, and resizing file systems dynamically. You will also practice setting up software RAID devices, configuring encrypted block devices.Btrfs File System - In this hands-on lab session, we will introduce you to Btrfs file system. You will be able to create and mount a Btrfs file system and learn to setup a mirrored/striped file system across multiple block devices. You’ll also learn how to add and remove block devices, and create file system snapshots. Register for this FREE event.

Read the article

How to use mount points in MilkShape models?

- by vividos

I have bought the Warriors & Commoners model pack from Frogames and the pack contains (among other formats) two animated models and several non-animated objects (axe, shield, pilosities, etc.) in MilkShape3D format. I looked at the official "MilkShape 3D Viewer v2.0" (msViewer2.zip at http://www.chumba.ch/chumbalum-soft/ms3d/download.html) source code and implemented loading the model, calculating the joint matrices and everything looks fine. In the model there are several joints that are designated as the "mount points" for the static objects like axe and shield. I now want to "put" the axe into the hand of the animated model, and I couldn't quite figure out how. I put the animated vertices in a VBO that gets updated every frame (I know I should do this with a shader, but I didn't have time to do this yet). I put the static vertices in another VBO that I want to keep static and not updated every frame. I now tried to render the animated vertices first, then use the joint matrix for the "mount joint" to calculate the location of the static object. I tried many things, and what about seems to be right is to transpose the joint matrix, then use glMatrixMult() to transform the modelview matrix. For some objects like the axe this is working, but not for others, e.g. the pilosities. Now my question: How is this generally implemented when using bone/joint models, and especially with MilkShape3D models? Am I on the right track?

Read the article

Object oriented wrapper around a dll

- by Tom Davies

So, I'm writing a C# managed wrapper around a native dll. The dll contains several hundred functions. In most cases, the first argument to each function is an opaque handle to a type internal to the dll. So, an obvious starting point for defining some classes in the wrapper would be to define classes corresponding to each of these opaque types, with each instance holding and managing the opaque handle (passed to its constructor) Things are a little awkward when dealing with callbacks from the dll. Naturally, the callback handlers in my wrapper have to be static, but the callbacks arguments invariable contain an opaque handle. In order to get from the static callback back to an object instance, I've created a static dictionary in each class, associating handles with class instances. In the constructor of each class, an entry is put into the dictionary, and this entry is then removed in the Destructors. When I receive a callback, I can then consult the dictionary to retrieve the class instance corresponding to the opaque reference. Are there any obvious flaws to this? Something that seems to be a problem is that the existence static dictionary means that the garbage collector will not act on my class instances that are otherwise unreachable. As they are never garbage collected, they never get removed from the dictionary, so the dictionary grows. It seems I might have to manually dispose of my objects, which is something absolutely would like to avoid. Can anyone suggest a good design that allows me to avoid having to do this?

Read the article

Cisco PIX firewall blocking inbound Exchange email

- by sumsaricum

[Cisco PIX, SBS2003] I can telnet server port 25 from inside but not outside, hence all inbound email is blocked. (as an aside, inbox on iPhones do not list/update emails, but calendar works a charm) I'm inexperienced in Cisco PIX and looking for some assistance before mails start bouncing :/ interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 hostname pixfirewall domain-name ciscopix.com fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 no fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 192.168.1.10 SERVER access-list inside_outbound_nat0_acl permit ip 192.168.1.0 255.255.255.0 192.168.1.96 255.255.255.240 access-list outside_cryptomap_dyn_20 permit ip any 192.168.1.96 255.255.255.240 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq 3389 access-list outside_acl permit tcp any interface outside eq ftp access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq https access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq www access-list outside_acl permit tcp any interface outside eq 993 access-list outside_acl permit tcp any interface outside eq imap4 access-list outside_acl permit tcp any interface outside eq 465 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq smtp access-list outside_cryptomap_dyn_40 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANYVPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list COMPANY_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_60 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANY_VPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_80 permit ip any 192.168.1.96 255.255.255.240 pager lines 24 icmp permit host 217.157.xxx.xxx outside mtu outside 1500 mtu inside 1500 ip address outside 213.xxx.xxx.xxx 255.255.255.128 ip address inside 192.168.1.1 255.255.255.0 ip audit info action alarm ip audit attack action alarm ip local pool VPN 192.168.1.100-192.168.1.110 pdm location 0.0.0.0 255.255.255.128 outside pdm location 0.0.0.0 255.255.255.0 inside pdm location 217.yyy.yyy.yyy 255.255.255.255 outside pdm location SERVER 255.255.255.255 inside pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_outbound_nat0_acl nat (inside) 1 0.0.0.0 0.0.0.0 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx 3389 SERVER 3389 netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx smtp SERVER smtp netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx https SERVER https netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx www SERVER www netmask 255.255.255.255 0 0 static (inside,outside) tcp interface imap4 SERVER imap4 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 993 SERVER 993 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 465 SERVER 465 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface ftp SERVER ftp netmask 255.255.255.255 0 0 access-group outside_acl in interface outside route outside 0.0.0.0 0.0.0.0 213.zzz.zzz.zzz timeout xlate 0:05:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout sip-disconnect 0:02:00 sip-invite 0:03:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ max-failed-attempts 3 aaa-server TACACS+ deadtime 10 aaa-server RADIUS protocol radius aaa-server RADIUS max-failed-attempts 3 aaa-server RADIUS deadtime 10 aaa-server RADIUS (inside) host SERVER *** timeout 10 aaa-server LOCAL protocol local http server enable http 217.yyy.yyy.yyy 255.255.255.255 outside http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable sysopt connection permit-ipsec crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 40 match address outside_cryptomap_dyn_40 crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 60 match address outside_cryptomap_dyn_60 crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 80 match address outside_cryptomap_dyn_80 crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map client authentication RADIUS LOCAL crypto map outside_map interface outside isakmp enable outside isakmp policy 20 authentication pre-share isakmp policy 20 encryption 3des isakmp policy 20 hash md5 isakmp policy 20 group 2 isakmp policy 20 lifetime 86400 telnet 217.yyy.yyy.yyy 255.255.255.255 outside telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 217.yyy.yyy.yyy 255.255.255.255 outside ssh 0.0.0.0 255.255.255.0 inside ssh timeout 5 management-access inside console timeout 0 dhcpd address 192.168.1.20-192.168.1.40 inside dhcpd dns SERVER 195.184.xxx.xxx dhcpd wins SERVER dhcpd lease 3600 dhcpd ping_timeout 750 dhcpd auto_config outside dhcpd enable inside : end I have Kiwi SysLog running but could use some pointers in that regard to narrow down the torrent of log messages, if that helps?!

Read the article

How can I protect files on my NGiNX server?

- by Jean-Nicolas Boulay Desjardins

I am trying to protect files on my server (multiple types), with NGiNX and PHP. Basically I want people to have to sign in to the website if they want to access those static files like images. DropBox does it very well. Where by they force you to sign in to access any static files you put on there server. I though about using NGiNX Perl Module. And I would write a perl script that would check the session to see if the user was sign in to give them access to a static file. I would prefer using PHP because all my code is running under PHP and I am not sure how to check a session created by PHP with PERL. So basically my question is: How can I protect static files of any types that would need the user to have sign in and have a valid session created with a PHP script?

Read the article

Preventing Users/Groups from accessing certain Domains

- by ncphillips

I have created a Study account which I use when doing anything school related work. It's purpose is to remove the distractions of my normal account, such as social media and news websites. I know /etc/hosts can be edited to block certain domains from being accessed, but this is for all Users, and I don't want to have to switch in and out of Admin to change it every time I want to focus. Is there any way to block these domains for specific Users or Groups?

Read the article

Multi user issue in Drupal 7

- by sachin

I am trying to create a web site in which there are different link for each user. Like if my site address is example.com and there are three users: u1,u2,u3... If any of them is logged in, then the site should redirect to example.com/u1 and if he create any link or block on this url, this link or block should not visible for remaining two links. Also all of them should have different admin pannel.

Read the article

Uniform not being applied to proper mesh

- by HaMMeReD

Ok, I got some code, and you select blocks on a grid. The selection works. I can modify the blocks to be raised when selected and the correct one shows. I set a color which I use in the shader. However, I am trying to change the color before rendering the geometry, and the last rendered geometry (in the sequence) is rendered light. However, to debug logic I decided to move the block up and make it white, in which case one block moves up and another block becomes white. I checked all my logic and it knows the correct one is selected and it is showing in, in the correct place and rendering it correctly. When there is only 1 it works properly. Video Of the bug in action, note how the highlighted and elevated blocks are not the same block, however the code for color and My Renderer is here (For the items being drawn) public void render(Renderer renderer) { mGrid.render(renderer, mGameState); for (Entity e:mGameEntities) { UnitTypes ut = UnitTypes.valueOf((String)e.getObject(D.UNIT_TYPE.ordinal())); if (ut == UnitTypes.Soldier) { renderer.testShader.begin(); renderer.testShader.setUniformMatrix("u_mvpMatrix",mEntityMatrix); renderer.texture_soldier.bind(0); Vector2 pos = (Vector2) e.getObject(D.COORDS.ordinal()); mEntityMatrix.set(renderer.mCamera.combined); if (mSelectedEntities.contains(e)) { mEntityMatrix.translate(pos.x, 1f, pos.y); renderer.testShader.setUniformf("v_color", 0.5f,0.5f,0.5f,1f); } else { mEntityMatrix.translate(pos.x, 0f, pos.y); renderer.testShader.setUniformf("v_color", 1f,1f,1f,1f); } mEntityMatrix.scale(0.2f, 0.2f, 0.2f); renderer.model_soldier.render(renderer.testShader,GL20.GL_TRIANGLES); renderer.testShader.end(); } else if (ut == UnitTypes.Enemy_Infiltrator) { renderer.testShader.begin(); renderer.testShader.setUniformMatrix("u_mvpMatrix",mEntityMatrix); renderer.testShader.setUniformf("v_color", 1.0f,1,1,1.0f); renderer.texture_enemy_infiltrator.bind(0); Vector2 pos = (Vector2) e.getObject(D.COORDS.ordinal()); mEntityMatrix.set(renderer.mCamera.combined); mEntityMatrix.translate(pos.x, 0f, pos.y); mEntityMatrix.scale(0.2f, 0.2f, 0.2f); renderer.model_enemy_infiltrator.render(renderer.testShader,GL20.GL_TRIANGLES); renderer.testShader.end(); } } }

Read the article

Project Euler Problem 14

- by MarkPearl

The Problem The following iterative sequence is defined for the set of positive integers: n n/2 (n is even) n 3n + 1 (n is odd) Using the rule above and starting with 13, we generate the following sequence: 13 40 20 10 5 16 8 4 2 1 It can be seen that this sequence (starting at 13 and finishing at 1) contains 10 terms. Although it has not been proved yet (Collatz Problem), it is thought that all starting numbers finish at 1. Which starting number, under one million, produces the longest chain? NOTE: Once the chain starts the terms are allowed to go above one million. The Solution public static long NextResultOdd(long n) { return (3 * n) + 1; } public static long NextResultEven(long n) { return n / 2; } public static long TraverseSequence(long n) { long x = n; long count = 1; while (x > 1) { if (x % 2 == 0) x = NextResultEven(x); else x = NextResultOdd(x); count++; } return count; } static void Main(string[] args) { long largest = 0; long pos = 0; for (long i = 1000000; i > 1; i--) { long temp = TraverseSequence(i); if (temp > largest) { largest = temp; pos = i; } } Console.WriteLine("{0} - {1}", pos, largest); Console.ReadLine(); }

Read the article

Is there any way to optimize my search blob program?

- by Vicky

I written this code to search the blob items (text files) on the basis of there content. For ex : if I search for "Good", then the files that contains "Good or good" word the name of that files should appear in search result. My code is working but i want to optimize it. class BlobSearch { public static int num = 1; static void Main(string[] args) { string accountName = "accountName"; string accessKey = "accesskey"; string azureConString = "DefaultEndpointsProtocol=https;AccountName=" + accountName + ";AccountKey=" + accessKey; string blob = "MyBlobContainer"; string searchText = string.Empty; Console.WriteLine("Type and enter to search : "); searchText = Console.ReadLine(); CloudStorageAccount account = CloudStorageAccount.Parse(azureConString); CloudBlobClient blobClient = account.CreateCloudBlobClient(); CloudBlobContainer blobContainer = blobClient.GetContainerReference(blob); blobContainer.FetchAttributes(); var blobItemList = blobContainer.ListBlobs(); GetBlobList(searchText, blobContainer, blobItemList); Console.ReadLine(); } private static async void GetBlobList(string searchText, CloudBlobContainer blobContainer, IEnumerable<IListBlobItem> blobItemList) { foreach (var item in blobItemList) { string line = string.Empty; CloudBlockBlob blockBlob = blobContainer.GetBlockBlobReference(item.Uri.ToString()); if (blockBlob.Name.Contains(".txt")) { await Search(searchText, blockBlob); } } } private async static Task Search(string searchText, CloudBlockBlob blockBlob) { string text = await blockBlob.DownloadTextAsync(); if (text.ToLower().IndexOf(searchText.ToLower()) != -1) { Console.WriteLine("Result : " + num + " => " + blockBlob.Name.Substring(blockBlob.Name.LastIndexOf('/') + 1)); num++; } } } I think blobContainer.ListBlobs(); is blocking code because search will not work until all the blob items loaded. Is there anyway to optimize it or anywhere else in my code. Thanks

Read the article

RESOLVED Why does IPtables's NAT stop working when I enable the firewall's third interface?

- by Kronick

On my firewall I've three interfaces : eth0 : public IP (46.X.X.X.) eth0:0 public IP (46.X.X.Y.) eth1 : public IP (88.X.X.X.) eth2 : private LAN (172.X.X.X) I've setup a basic NAT which works great until I turn on the eth1 interface, I basically loose the connectivity. When I turn off the interface (ifconfig eth1 down) then the NAT re-work. I've added some policy routing via iproute, which makes my three public IP's available. I don't understand why turning on eth1 on makes the LAN unavailable. PS : weirder ; when I turn on eth1 BUT remove the NAT, then the firewall is accessible by using the public IPS. So to me it's exclusively a NAT issue, since without the NAT the network works while with the NAT without the second public interface, the NAT does work. Regards EDIT : I've been able to make it work by using iproute2 rules. That was definitely a routing issue. Here is what I did : ip rule add prio 50 table main ip rule add prio 201 from ip1/netmask table 201 ip rule add prio 202 from ip2/netmask table 202 ip route add default via gateway1 dev interface1 src ip1 proto static table 201 ip route append prohibit default table 201 metric 1 proto static ip route add default via gateway2 dev interface2 src ip2 proto static table 202 ip route append prohibit default table 202 metric 1 proto static # mutipath ip rule add prio 221 table 221 ip route add default table 221 proto static \ nexthop via gateway1 dev interface1 weight 2\ nexthop via gateway2 dev interface2 weight 3

Read the article

Making a language switch main menu button in Drupal

- by Let_Me_Be

Read the article

Can anybody recommend an application for laying out algorithms on a mac? [closed]

- by Scotty

In my intro to software development class I'm using a program called raptor which really helps me when I'm mapping out semi-complex algorithms and programs. The thing that I like about raptor is that when I'm flowcharting an algorithm, I can run it like an actual program and raptor steps through the code block by block. Unfortunately, raptor is only available on windows and when I'm at home I spend most of my time on Mac OS X. Is there any programs available for mac that help flowchart and step through algoritms?

Read the article

Django | Apache | Deploy website behind SSL

- by planet260

So here are my requirements. I have a website built in Django. I deployed it on Apache Ubuntu. Before there was no SSL involved so the deployment was pretty simple. But now the requirements are changed. Now I have to take a few actions like signup and login behind SSL and present the admin panel and other normally via HTTP. By following the this tutorial I have set-up Apache and SSL and generated certificates for SSL communication. But I am not sure how to proceed, ie. how to serve only a few of my actions through SSL. Below is my configuration. The normal actions are working fine but I don't know how to configure SSL calls. WSGIScriptAlias / /home/ubuntu/myproject/src/myproject/wsgi.py WSGIPythonPath /home/ubuntu/myproject/src <VirtualHost *:80> ServerName mydomain.com <Directory /home/ubuntu/myproject/src/myproject> <Files wsgi.py> order deny,allow Allow from all </Files> </Directory> Alias /static/admin/ "/home/ubuntu/myproject/src/static/admin/" <Directory "/home/ubuntu/myproject/src/static/admin/"> Order allow,deny Options Indexes Allow from all IndexOptions FancyIndexing </Directory> <Location "/login"> RewriteEngine on RewriteRule /admin(.*)$ https://mydomain.com/login$1 [L,R=301] </Location> </VirtualHost> <VirtualHost *:443> ServerName mydomain.com SSLEngine on SSLOptions +StrictRequire SSLCertificateFile /etc/apache2/ssl/apache.crt SSLCertificateKeyFile /etc/apache2/ssl/apache.key <Directory /home/ubuntu/myproject/src/myproject> <Files wsgi.py> order deny,allow Allow from all </Files> </Directory> Alias /static/admin/ "/home/ubuntu/myproject/src/static/admin/" <Directory "/home/ubuntu/myproject/src/static/admin/"> Order allow,deny Options Indexes Allow from all IndexOptions FancyIndexing </Directory> </VirtualHost> Can you please help me out on how to achieve this? What am I doing wrong? I have read a lot of tutorials but honestly I am not really good at configurations. Any help is appreciated.

Read the article

Free book from Microsoft - Building Elastic and Resilient Cloud Applications - Developer's Guide to the Enterprise Library 5.0 Integration Pack for Windows Azure

- by TATWORTH

At http://www.microsoft.com/en-us/download/details.aspx?id=29994, Microsoft are are offering a free book - "Building Elastic and Resilient Cloud Applications - Developer's Guide to the Enterprise Library 5.0 Integration Pack for Windows Azure"The Microsoft Enterprise Library Integration Pack for Windows Azure is an extension to the Microsoft Enterprise Library 5.0 that can be used with Windows Azure. It includes the Autoscaling Application Block, the Transient Fault Handling Application Block, a protected configuration provider and the Blob configuration source.The book is available as PDF, mobi and epub formats.

Read the article

Getting the total number of processors a computer has (c#)

- by mbcrump

Here is a code snippet for getting the total number of processors a computer has without using Environment.ProcessorCount. I found out that Environment.ProcessorCount is not necessary returning the correct value on some Intel based CPU’s. using System; usingSystem.Collections.Generic; usingSystem.Linq; usingSystem.Text; usingSystem.Globalization; usingSystem.Runtime.InteropServices; namespaceConsoleApplication4 { classProgram { static voidMain(string[] args) { int c = ProcessorCount; Console.WriteLine("The computer has {0} processors", c); Console.ReadLine(); } private static classNativeMethods { [StructLayout(LayoutKind.Sequential)] internal struct SYSTEM_INFO { public ushort wProcessorArchitecture; public ushort wReserved; public uint dwPageSize; publicIntPtr lpMinimumApplicationAddress; publicIntPtr lpMaximumApplicationAddress; publicUIntPtr dwActiveProcessorMask; public uint dwNumberOfProcessors; public uint dwProcessorType; public uint dwAllocationGranularity; public ushort wProcessorLevel; public ushort wProcessorRevision; } [DllImport("kernel32.dll", CharSet = CharSet.Auto, ExactSpelling = true)] internal static extern voidGetNativeSystemInfo(refSYSTEM_INFOlpSystemInfo); } public static int ProcessorCount { get { NativeMethods.SYSTEM_INFOlpSystemInfo = newNativeMethods.SYSTEM_INFO(); NativeMethods.GetNativeSystemInfo(reflpSystemInfo); return(int)lpSystemInfo.dwNumberOfProcessors; } } } }

Read the article

@staticmethod vs module-level function

- by darkfeline

This is not about @staticmethod and @classmethod! I know how staticmethod works. What I want to know is the proper use cases for @staticmethod vs. a module-level function. I've googled this question, and it seems there's some general agreement that module-level functions are preferred over static methods because it's more pythonic. Static methods have the advantage of being bound to its class, which may make sense if only that class uses it. However, in Python functionality is usually organized by module not class, so usually making it a module function makes sense too. Static methods can also be overridden by subclasses, which is an advantage or disadvantage depending on how you look at it. Although, static methods are usually "functionally pure" so overriding it may not be smart, but it may be convenient sometimes (though this may be one of those "convenient, but NEVER DO IT" kind of things only experience can teach you). Are there any general rule-of-thumbs for using either staticmethod or module-level functions? What concrete advantages or disadvantages do they have (e.g. future extension, external extension, readability)? If possible, also provide a case example.

Read the article

Bridging networks problems

- by Eric

In my setup I have 3 computers and 2 (wireless d-link) routers. Computer1 has ethernet and wireless interfaces ethernet : 192.168.0.x (DHCP) wireless : 192.168.10.254 (static) Computer 2 has ethernet with two ips ethernet1 : 192.168.0.90 (static) ethernet2 : 192.168.10.110 (static) Computer 3 is a particular device with a hardcoded ip that I can't change wireless : 192.168.10.41 (static) Router1 manages internet and DHCP for network 192.168.0.0/24 Router2 is more complicated. I don't use DHCP. I use it to bridge between both networks. Its static ip is 192.168.10.1 Computer1 can ping Computer2. Computer1 can ping Computer3. Computer1 can ping Router1. Computer1 cannot ping Router2. Computer2 cannot ping Computer3. Computer2 can ping Router2. Router1 can ping Router1 Router2 can ping Computer2 Router2 cannot ping Computer1 Router2 cannot ping Computer3 This is very weird. Router2 manages the wireless connection, it should be able to ping its own computers right? My question is obviously : How can I make it so Computer2 can access everything else. This is a traditional case of "it was working before christmas and now it doesn't". The ethernet wiring is as follow : [ Computer1 ]----[ Router1 ]---[ Router2 ]---[ Computer3 ] I am using switch (lan) ports on Router1/2.

Read the article

Routing / binding 128 to one server

- by Andrew

I have a Ubuntu server with 128 ip's (static external ips 86.xx.xx.16), and I want to crawl pages thru different ip's. The gateway is xx.xxx.xxx.1, the main ip is xx.xxx.xxx.16, and the other 128 ip's are xx.xxx.xxx.129/255. I tried this configuration in /etc/network/interfaces but I doesn't work. It work if I remove the gateway for the aliases eth0:0 and eth0:1. I think this is routing problem. auto lo iface lo inet loopback auto eth0 auto eth0:0 auto eth0:1 iface eth0 inet static address xx.xxx.xxx.16 netmask 255.255.255.128 gateway xx.xxx.xxx.1 iface eth0:0 inet static address xx.xxx.xxx.129 netmask 255.255.255.128 gateway xx.xxx.xxx.1 iface eth0:1 inet static address xx.xxx.xxx.130 netmask 255.255.255.128 gateway xx.xxx.xxx.1 Also, please tell me how to "reset" every changes that I made in networking and routing. Thank you

Read the article

Scaling a node.js application, nginx as a base server, but varnish or redis for caching?

- by AntelopeSalad

I'm not close to being well versed in using nginx or varnish but this is my setup at the moment. I have a node.js server running which is serving either json, html templates, or socket.io events. Then I have nginx running in front of node which is serving all static content (css, js, etc.). At this point I would like to cache both static content and dynamic content to memory. It's to my understanding that varnish can cache static content quite well and it wouldn't require touching my application code. I also think it's capable of caching dynamic content too but there cannot be any cookie headers? I do use redis at the moment for holding session data and planned to use it for other things in the future like keeping track of non-crucial but fun stats. I just have no idea how I should handle caching everything on the site. I think it comes down to these options but there might be more: Throw varnish in front of nginx and let varnish cache static pages, no app code changes. Redis would cache dynamic db calls which would require modifying my app code. Ignore using varnish completely and let redis handle caching everything, then use one of the nginx-redis modules. I'm not sure if this would require a lot of app code changes (for the static files). I'm not having any luck finding benchmarks that compare nginx+varnish vs nginx+redis and I'm too inexperienced to bench it myself (high chances of my configs being awful). I'm basically looking for the solution that would be the most efficient in terms of req/sec and scalable in the future (throw new hardware at the problem + maybe adjust some values in a config = new servers up and running semi-painlessly).

Read the article

Really weird GL Behaviour, uniform not "hitting" proper mesh? LibGdx

- by HaMMeReD

Ok, I got some code, and you select blocks on a grid. The selection works. I can modify the blocks to be raised when selected and the correct one shows. I set a color which I use in the shader. However, I am trying to change the color before rendering the geometry, and the last rendered geometry (in the sequence) is rendered light. However, to debug logic I decided to move the block up and make it white, in which case one block moves up and another block becomes white. I checked all my logic and it knows the correct one is selected and it is showing in, in the correct place and rendering it correctly. When there is only 1 it works properly. Video Of the bug in action, note how the highlighted and elevated blocks are not the same block, however the code for color and My Renderer is here (For the items being drawn) public void render(Renderer renderer) { mGrid.render(renderer, mGameState); for (Entity e:mGameEntities) { UnitTypes ut = UnitTypes.valueOf((String)e.getObject(D.UNIT_TYPE.ordinal())); if (ut == UnitTypes.Soldier) { renderer.testShader.begin(); renderer.testShader.setUniformMatrix("u_mvpMatrix",mEntityMatrix); renderer.texture_soldier.bind(0); Vector2 pos = (Vector2) e.getObject(D.COORDS.ordinal()); mEntityMatrix.set(renderer.mCamera.combined); if (mSelectedEntities.contains(e)) { mEntityMatrix.translate(pos.x, 1f, pos.y); renderer.testShader.setUniformf("v_color", 0.5f,0.5f,0.5f,1f); } else { mEntityMatrix.translate(pos.x, 0f, pos.y); renderer.testShader.setUniformf("v_color", 1f,1f,1f,1f); } mEntityMatrix.scale(0.2f, 0.2f, 0.2f); renderer.model_soldier.render(renderer.testShader,GL20.GL_TRIANGLES); renderer.testShader.end(); } else if (ut == UnitTypes.Enemy_Infiltrator) { renderer.testShader.begin(); renderer.testShader.setUniformMatrix("u_mvpMatrix",mEntityMatrix); renderer.testShader.setUniformf("v_color", 1.0f,1,1,1.0f); renderer.texture_enemy_infiltrator.bind(0); Vector2 pos = (Vector2) e.getObject(D.COORDS.ordinal()); mEntityMatrix.set(renderer.mCamera.combined); mEntityMatrix.translate(pos.x, 0f, pos.y); mEntityMatrix.scale(0.2f, 0.2f, 0.2f); renderer.model_enemy_infiltrator.render(renderer.testShader,GL20.GL_TRIANGLES); renderer.testShader.end(); } } }

Read the article

Can't recover hard drive

- by BreezyChick89

My drive got corrupt after a thunderstorm. It used to be 1 partition of 2.5tb but now it shows 2 partitions. It's weird because 300gig free space is about how much it had before corrupting, but it was part of the first partition. I tried $ sudo resize2fs -f /dev/sdb1 Resizing the filesystem on /dev/sdb1 to 536870911 (4k) blocks. resize2fs: Can't read an block bitmap while trying to resize /dev/sdb1 Please run 'e2fsck -fy /dev/sdb1' to fix the filesystem after the aborted resize operation. sudo e2fsck -f /dev/sdb1 e2fsck 1.42 (29-Nov-2011) The filesystem size (according to the superblock) is 610471680 blocks The physical size of the device is 536870911 blocks Either the superblock or the partition table is likely to be corrupt! Abort? n .... Error reading block 537395215 (Invalid argument) while reading inode and block bitmaps. Ignore error<y>? yes Force rewrite<y>? yes Error writing block 537395215 (Invalid argument) while reading inode and block bitmaps. Ignore error<y>? yes ... A lot of these. I can't use e2fsck -y because the first question aborts if I say "y". If I put a weight on the 'y' key it fails because none of the errors were really fixed. I asked this question before and tried using gparted but gparted fails because the first thing it does is: e2fsck -f -y -v /dev/sdb1 giving the same error. The disk status says healthy. There are no bad blocks. This is very frustrating because I can see the data in testdisk and it looks like it's all there. I already bought another 2.5tb drive and made a clone using dd. The next step if I can't fix this is to wipe that drive and just move the data with testdisk, but it seems certain folders will copy infinitely until the drive is full because of symlinks or errors so it's also a difficult option. sudo fdisk -l Disk /dev/sdb: 2500.5 GB, 2500495958016 bytes 255 heads, 63 sectors/track, 304001 cylinders, total 4883781168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0005da5e Device Boot Start End Blocks Id System /dev/sdb1 * 2048 4294969342 2147483647+ 83 Linux sudo badblocks -b 4096 -n -o badfile /dev/sdb 610471680 536870911 badfile is empty I also tried changing the superblock with "fsck -b" but all of them are the same.

Read the article

Fourth texture = segmentation fault

- by Robin92

I keep on getting segmentation fault each time I load fourth texture - what type of texture, I mean filename, does not matter. I checked value of GL_TEXTURES_STACK_SIZE which turned out to be 10 so quite more than 4, isn't it? Here're code fragments: funciton to load texture from png static GLuint gl_loadTexture(const char filename[]) { static int iTexNum = 1; GLuint texture = 0; img_s *img = NULL; img = img_loadPNG(filename); if (img) { glGenTextures(iTexNum++, &texture); glBindTexture(GL_TEXTURE_2D, texture); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER,GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER,GL_LINEAR); glTexImage2D(GL_TEXTURE_2D, 0, img->iGlFormat, img->uiWidth, img->uiHeight, 0, img->iGlFormat, GL_UNSIGNED_BYTE, img->p_ubaData); img_free(img); //it may cause errors on windows } else printf("Error: loading texture '%s' failed!\n", filename); return texture; } actual loading static GLuint textures[4]; static void gl_init() { (...) //setting up OpenGL /* loading textures */ textures[0] = gl_loadTexture("images/background.png"); textures[1] = gl_loadTexture("images/spaceship.png"); textures[2] = gl_loadTexture("images/asteroid.png"); textures[3] = gl_loadTexture("images/asteroid2.png"); //this is causing SegFault no matter which file I load! } Any ideas? Problem is present on both Linux and Windows.

Read the article

Hide or Show singleton?

- by Sinker

Singleton is a common pattern implemented in both native libraries of .NET and Java. You will see it as such: C#: MyClass.Instance Java: MyClass.getInstance() The question is: when writing APIs, is it better to expose the singleton through a property or getter, or should I hide it as much as possible? Here are the alternatives for illustrative purposes: Exposed(C#): private static MyClass instance; public static MyClass Instance { get { if (instance == null) instance = new MyClass(); return instance; } } public void PerformOperation() { ... } Hidden (C#): private static MyClass instance; public static void PerformOperation() { if (instance == null) { instance = new MyClass(); } ... } EDIT: There seems to be a number of detractors of the Singleton design. Great! Please tell me why and what is the better alternative. Here is my scenario: My whole application utilises one logger (log4net/log4j). Whenever, the program has something to log, it utilises the Logger class (e.g. Logger.Instance.Warn(...) or Logger.Instance.Error(...) etc. Should I use Logger.Warn(...) or Logger.Warn(...) instead? If you have an alternative to singletons that addresses my concern, then please write an answer for it. Thank you :)

Search Results

Search found 20990 results on 840 pages for 'static block'.

Page 144/840 | < Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151 | Next Page >

- by Darius

- by Zeynep Koch

- by vividos

- by Tom Davies

- by sumsaricum

- by Jean-Nicolas Boulay Desjardins

- by ncphillips

- by sachin

- by HaMMeReD

- by MarkPearl

- by Vicky

- by Kronick

- by Let_Me_Be

- by Scotty

- by planet260

- by TATWORTH

- by mbcrump

- by darkfeline

- by Eric

- by Andrew

- by AntelopeSalad

- by HaMMeReD

- by BreezyChick89

- by Robin92

- by Sinker

< Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151 | Next Page >