Search Results

Search found 4091 results on 164 pages for 'intel celeron'.

Page 145/164 | < Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >

  • Linux wireless disconnect every 20 minutes

    - by james
    My laptop uses CentOS 6.3 with kernel 2.6.32-279.el6.x86_64. My wireless adaptor is Intel Corporation Centrino Wireless-N 1000. My wireless connection always get off after about 20 minutes. The network applet shows the connection is still on with good signal strength, but I just cannot load any web pages even the configuration page of the wireless router. The problem will continue until I disable and reconnect the wireless. Other devices like my cell phone uses the same wireless network without the problem. Even yesterday I'm using the same laptop with Fedora 17 without this problem. I also searched the internet and someone said running services NetworkManager and network simultaneously may be a problem. But I cannot stop any one of them because: if I stop network and start NetworkManager, the network service will start automatically; if I stop NetworkManager and run network, it says "Device does not seem to be present, delaying initialization." when trying to bringing on the wireless. What shall I do to get rid of the problem? Thank you very much!

    Read the article

  • Kindly guide me to buy a new laptop [on hold]

    - by Its me 007
    I am from India. I want to buy a new laptop. Shortlisted few but confused between which processor,Chip set and Graphics will be the best suited for my requirements. NOTE: NOT ABLE TO POST THE LINKS YOU WILL HAVE TO COPY PASTE IT. SORRY. 1) HP Pavilion 15-N004TX - 4th Gen CI5 - 4200U/4GB RAM/500 GB HDD/ 1GB Radeon Graphic - Rs 39990 www.homeshop18.com/hp-pavilion-15-n004tx-laptop-4th-gen-intel-core-i5-4200u-4gb-500gb-15-6-linux-silver-black/computers-tablets/laptops/product:30989197/cid:16317/ 2) Lenovo Essential G510 (59-398452) - 4th Gen Ci5 4200M/ 4GB/ 500 GB/Win8/2GB Graph ATI Sunpro 8570 - Rs 44969 www.flipkart.com/lenovo-essential-g510-59-398452-laptop-4th-gen-ci5-4gb-500gb-win8-2gb-graph/p/itmdp26eprwf5k5v?gclid=CMnh99GA2LoCFaRU4godNiUAGQ&semcmpid=sem_7847244212_laptopsnew_goog&tgi=sem%2C1%2CG%2C7847244212%2Cg%2Csearch%2C%2C24387103114%2C1t1%2Cb%2C%2Blenovo+%2Bg510%2F59+%2B398452%2Cc%2C%2C%2C%2C%2C%2C%2C2 3) HP Pavilion G6-2303TX Laptop (3rd Gen Ci5 3230M/ 4GB/ 500GB/ DOS/ 1GB Graph) - Rs 40500 www.flipkart.com/hp-pavilion-g6-2303tx-laptop-3rd-gen-ci5-4gb-500gb-dos-1gb-graph/p/itmdm6yzh4gr4cxd?pid=COMDM6YHWMGDRDEZ&ref=1d2b85fc-a03d-4c7d-844b-ec9e8dc95a81 4) HP Pavilion 15-E039TX Laptop (3rd Gen Ci5 3230M/ 4GB/ 1TB/ Win8/ 2GB Graph) - Rs 46690 www.flipkart.com/hp-pavilion-15-e039tx-laptop-3rd-gen-ci5-4gb-1tb-win8-2gb-graph/p/itmdn4d9wykhdcpz?pid=COMDN4CZGFMGJNTN&ref=1d2b85fc-a03d-4c7d-844b-ec9e8dc95a81 Now I am confused between: Which Processor and chipset is best? How much graphic card is enough? (Not a gamer) Is any of this laptop future proof i.e. it should at least support upcoming latest programming softwares which eats more processor and memory. Laptop will be mainly used for multiprocessing.It should be at least capable for following: Visual Studio 2012 and the upcoming versions for at least 4 years SQL server 2008 R2 and above Sharepoint Blend Photoshop Kindly suggest. If anyone know any good laptop with good configuration in the 50k budget kindly suggest. Thanks in advance.

    Read the article

  • DPMS does not work: the monitor is not switched off

    - by bortzmeyer
    I have a monitor which was properly switched off by my Debian PC when unused. I attached it to another machine and, this times, it is never switched off. In /etc/X11/xorg.conf, I have: Section "Monitor" Identifier "Generic Monitor" Option "DPMS" It is recognized when X11 starts: (II) Loading extension DPMS ... (II) VESA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display ... (**) Option "dpms" (**) VESA(0): DPMS enabled The operating system is Debian stable "lenny". The graphics card is: 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrate d Graphics Controller (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 2a6f Flags: bus master, fast devsel, latency 0, IRQ 5 Memory at fe900000 (32-bit, non-prefetchable) [size=512K] I/O ports at b080 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at fe800000 (32-bit, non-prefetchable) [size=1M] Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-Capabilities: [d0] Power Management version 2 X11 is: X.Org X Server 1.4.2 Release Date: 11 June 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux Debian (xorg-server 2:1.4.2-10.lenny2) Current Operating System: Linux ludwigVII 2.6.26-2-686 #1 SMP Sun Jun 21 04:57:3 8 UTC 2009 i686 Build Date: 08 June 2009 09:12:57AM

    Read the article

  • Codecs, Premiere Pro & Quicktime: Import or Play Error

    - by Nchpmn
    Original Question I've been using a FS-H200 (not the Pro variant) recorder with a JVC ProHD camera. I have been shooting with the DTE FORMAT to Quicktime (.mov). I copied the files to an external hard drive and am now trying to edit. The files will play back in VLC, as they would be expected to. However they will not import into Adobe Premiere CS5.5, instead giving an error: Unsupported format or damaged file. Quicktime gives the following error when attempting to play the files: Error -2002: a bad public movie atom was found in the movie (Filename) To try and fix this, I have installed the following codec packs: K-Lite Codec Pack 64-bit Full (version 5.9, latest) K-Lite Codec Pack 32-bit Full (version 8.4, latest) MainConcept Codec Suite (Broadcast) v5.1 for Adobe CS5 Reinstalled Quicktime with new download from Apple The same errors and problems still exist. From this I can assume that there is an issue with Quicktime and that is what Premiere is using as an encoder/decoder for the codec. Is there any way to fix this? From looking at the "Codec Information" from VLC: Stream 0 Type: Video Codec: MPEG-1/2 (mpgv) Language: English Resolution: 1280 x 720 Frame Rate: 25 Stream 1 Type: Audio Codec: PCM S16 BE (twos) Language: English Channels: Stereo Sample Rate: 48000 Hz Bits per sample: 16 Other computer specs: Windows 7 Professional 64-bit (SP1) Gigabyte Z68X-UD3-B3 Intel i7-2600K 16GB DDR3 2TB WD 7200RPM SATA 6Gb/s LaCie d2 Quadra 2TB v3 7200RPM (External HDD) NVIDIA GeForce GTX 560 Ti Golden Sample Updates 2012-03-11 @ 2050 AEDT MPEG Steamclip doesn't recognise, play or convert the footage. File open error: unrecognised file type. [Open Anyway] File open error: can't find video or audio tracks. 2012-03-24 @ 1920 AEDT Had to transcode the footage. :(

    Read the article

  • Hibernate between OS X and Bootcamp Win 7

    - by Willem
    Wouldn't it be great if someone wrote a guide or an app which allowed you to switch instantly between OS X and Windows using Hibernate in both OS:s? Windows 7 already has an option "Hibernate" which allows you to boot back to your OS X partition, but OS X does not exactly offer the same. However, there are possibilities here. It seems that the recent Mac's have 3 different kinds of sleeping mode: Sleep: Low power consumption, RAM still active. Legacy Safe Sleep: No power consumption(?), writes RAM to disk and shuts down (is this the same as Hibernate?) Safe Sleep: Writes RAM to disk and enters sleep mode. If battery level drops too low it goes into Hibernate (is this Hibernate the same as #2 in this list? This is the Hibernate I will be referring to int he rest of this post) It seems that I am unable to force my MacBook Pro (Late 2011) OS X 10.7.3 into a true hibernate using either command line or apps that are supposed to do this. I believe the Mac should show that white loading bar whilst waking up if it was truly put into hibernate (which it does not). But I can get this white bar to show by letting my battery level drop to 0% so there is obviously a system function for it (obviously, duh! :). When Win 7 goes into hibernate it shuts down completely and you can then boot into OS X on startup. On OS X however, hibernate forces you to wake up into OS X. Can you hack this so that you're allowed to select boot partition after OS X hibernates? Would it be possible to use the true hibernate system functionalities of Win 7 and OS X to create a kind of instant switching between the two? Imagine this on a quick SATA-3 SSD like my 180GB Intel 520. Thanks / Willem

    Read the article

  • Difference between CurrentClockSpeed and MaxClockSpeed

    - by Ben
    Rationale this belongs on ServerFault rather than StackOverflow - I already have my program which gets the value, I am querying the value returned and what it means. I have an in-house program which audits our company PCs, and one of the things it checks is the speed of the processor. To do this, it queries the Win32_Processor WMI class and gets the value of CurrentClockSpeed. We were playing with the data today and found an anomaly with some of the speeds being reported incorrectly (for example, CurrentClockSpeed said 1.0GHz, whereas the CPU name said Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz [Confirmed it is in fact 1.83GHz]). I did a bit of digging on the internet and found this blog post which might explain what is going on. My initial thought was that I could change the program to instead get the value for MaxClockSpeed instead of CurrentClockSpeed, but Microsoft's documentation doesn't clearly define what this will return. What I mean by that is will this return a value which is its actual maximum speed (say if it were overclocked) but which it would not normally be running at, or would it return what I expect, which is its maximum speed under normal (not overclocked) conditions?

    Read the article

  • "Can't find root filesystem / error mounting /dev/root" when booting to new kernel

    - by salparadise
    I am trying to upgrade my kernel from 2.6.18-274 to 2.6.39 for some wireless card drivers. When I boot into the new kernel I get the "Can't find root filesystem / error mounting /dev/root" googling led me to this page http://fedoraproject.org/wiki/Common_kernel_problems#Can.27t_find_root_filesystem_.2F_error_mounting_.2Fdev.2Froot From what I am reading seems to be an issue with a driver for my SATA controller or HD, but I can't find what option I need to add to the kernel. Doing a diff from the old initrd to the new one gives me the following: root-> diff /tmp/kafter /tmp/kbefore 6a7,8 > lib/dm-message.ko > lib/dm-region_hash.ko 8a11 > lib/dm-raid45.ko 13d15 < lib/dm-region-hash.ko 16a19 > lib/dm-mem-cache.ko Do I need any of those? not sure if I would need dm-raid45.ko as I am not running a raid. I have the same SATA and IDE options configured for both kernels so not sure what else to look for, any help is appreciated. Additionally here is the HW info: 00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Hewlett-Packard Company Unknown device 3006 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 233 I/O ports at 1818 [size=8] I/O ports at 1830 [size=4] I/O ports at 1820 [size=8] I/O ports at 1834 [size=4] I/O ports at 14f0 [size=16] Capabilities: [70] Power Management version 2 root-> smartctl -a /dev/sda ... === START OF INFORMATION SECTION === Device Model: WDC WD5000AADS-00S9B0

    Read the article

  • Ignore non-unicode programs language when installing software

    - by mitya
    This is something that is driving me nuts for a while and I haven't been able to find a solution for this problem anywhere. I am running Windows 7 and my "Language for non-Unicode programs" setting is set to Russian. I need for some non-unicode software that has a Russian UI. However, for most of my software I prefer to use the English UI. A lot of software out there is multilingual and is too smart for my liking. When installing, it switches the UI to Russian and the software UI stays in Russian after the installation without an option to change that, besides setting the "non-unicode language" to English. It switches back to Russian once I revert the setting and reboot. Most of the time it is driver software, i.e: Intel, HP, etc. How can force the installation to run English and stay that way after install, ignoring the "Language for non-Unicode programs" setting? Now, I understand this might be specific to the installer: MSI, Install Shield, etc. But any solution will be good, even if I have to apply it for every software installation. Thanks in advance for any helpful information!

    Read the article

  • Ubuntu 12.10 64bit host reboots when trying to install any guest system using VirtualBox

    - by gts123
    I am having a really nasty problem with VirtualBox as everytime I try to install any guest OS(using ISO file as CD for installation media), the installation starts normally but as soon as it is about to start either installing to virtual hard drive or loading(e.g. as LiveFS) it causes the host system to reboot abruptly. Config is as below: Host system: Ubuntu 12.10 64bit - Intel® Core i7-2640M CPU @ 2.80GHz × 4 Virtualbox version: 4.1.18_Ubuntu r78361 Guest OS systems tried: 32bit version of FreeBSD 9, Debian 6, Tails 0.14 VM setup Tried to have the minimal setup necessary just in case it would avoid for each system to make sure I'd avoid conflicts, but to no avail. I've tried different values and combinations of the below but the problem still persists: Shared Clipboard: Disabled Show in fullscreen/seamless: Disabled Remember runtime changes: DIsabled Base Memory: 2048 MB Chipset: PIIX3 IO APIC: Disabled EFI: Disabled Absolute Pointing device: Disabled Processor(s): 1 CPU PAE/NX: Disabled VT-x/AMD-V: Disabled Video Memory: 12 MB 3d/2d acceleration: Disabled Storage IDE COntroller: PIIX3 (same as chipset instead of PIIX4) Use host I/O cache: No Audio: disabled Network adapter: NAT USB controller: disabled No shared folder Also another sideeffect of the reboot is that it appears that it does not log any information in the error log files; not making things any easier. Please help.

    Read the article

  • Windows Explorer Hangs on Right-Click

    - by Bryan
    I am not sure if this is the right site to post this one as I typically post coding questions on stackoverflow. But I'll ask anyways and hopefully someone can move it if it's incorrect. Currently I have a customer built PC, utilizing an Intel i7 chip, 1300WATT PSU, 8Gigs of RAM, and two video cards. Originally I had the one video card (NVIDIA) that used the PSU and had two DVI output. After purchasing a third monitor I installed another ATI) graphics card not needed any PSU connectors. After installing and restarting, I noticed that when I right-click on my desktop, or through Windows Explorer it will hang, freeze then restarted. Sometimes after Windows Explorer restarts the problem dissipates. I checked to make sure everything was connected properly and it was. I repaired the ATI Catalyst Control Center to see if that had an issue, and I checked to see if either video card required updated drivers. Nothing worked. I tried restarting my PC and that didn't work. I tried using ShellXView (I forgot what it's actually called) and tried closed processes but that didn't work. Does anyone have any idea what could have caused this orpossible solutions I should try?< Thanks in advance.

    Read the article

  • Three server processes consume no more than 50% of Dual Core CPU

    - by thor
    I have three processes running on Intel Core 2 Duo CPU. From watching output of 'top' and graphs of CPU load (drawn by MRTG, data collection via SNMP) I can see that CPU load is never more than 50%, and, most of the day, when those processes are busy CPU load has a ceiling at 50 %. I mean, CPU load grows up to 50% in the morning and stays there until late evening. My first thought was that only one core was used at 100% thus giving 50% of both CPUs. But, as there are three processes running and from 'top' I see that both cores are being loaded, so this is not the case. schedtool shows that CPU affinity for those three processes is at default, 0x03, allowing them to use both cores. If I force one process to one core (schedtool -a 0x01), and two others to second (schedtool -a 0x02), cumulative usage grows beyond 50%. Why three processes seem to consume only 50% of two cores? Why forcing them to different CPUs allows usage to grow higher? Any hints? P.S. Processes in question are Counter-Strike servers.

    Read the article

  • Best way to build / implement a corporate developer Linux distro with multiple kernels?

    - by Garen
    At work we have Linux users who understandably prefer using Ubuntu. Problem is, we also have developer tools that only work with 'officially' supported Linux distributions that use much older 2.6.18 based kernels. (And even if they worked with newer ones, the vendors could always say they won't "support" the software unless it's on one of their 'officially' supported platforms.) We could of course just tell them to use CentOS or something else 2.6.18-based, and I'm sure their response would be something like: "you can take Ubuntu from our cold, dead hands." :) Which brings to me some questions--is there any good/easy/recommended way to run something like Ubuntu as a host VM and Centos 5.x as a guest OS (with which system--Xen,KVM,VMWare, ...?), and then roll that into our own custom internal distribution that could be easily installed? KVM looks like a good high-performance option just recently included in RHEL 5.4, but if hardware support for virtualization like Intel-VT or AMD-V is necessary, then I'd guess only those folks with fairly new PCs will be able to do it. Would be very interested to hear how anyone else has addressed this kind issue. EDIT: The target audience / users of this kind of system would be developers, each one needs to run locally licensed commercial software, so building out some separate beefy central machines isn't an option unfortunately due to license restrictions. Even if that weren't the case, a couple developers could quickly eat up the resources with parallel builds. :) Ideally, I was hoping there was some step-by-step guide out there to build your own pre-built distribution that had e.g. CentOS 5.x and Ubuntu Desktop as a guest.

    Read the article

  • Power issues Foxconn Barebones kit

    - by alpha1
    I have a Foxconn R20D2 bought about a year and a half ago. It ran fine for a while and then around last summer it started having power issues. I chalked it up to changes in electric current due to the overwhelmed grid when people turn on their AC units, but this problem has stayed for all year, shutting off randomly, shutting off when i turn on a vacuum and similar problems. Now that its summer again, the box basically sits there all day cycling itself, and now has gotten to the point it tried to boot and after 3 seconds, fails, shuts off and tried again. I know its power related, it runs opensuse linux and there are never any shutdown logs or anything of that sort. As the weather got hotter i noticed it happening more and more, and it most often happened in the morning, i presume as people woke up and turn on the AC. The power supply is a Chennel well technology co LTD model DSL-150. 150W max output. Its an intel atom dual core, with 2 sata drives, no CD/floppy etc, recently upgrades from 2 to 4gb of ram. It runs at 104 degrees Fahrenheit all the time almost. Any way i can test the power supply or anything else to try to fix it? Im a software guy, not hardware so im at a complete loss here, thanks for all assistance you can provide! EDIT: The switch on the back that says 230 or 115 is set to 230. If im in the USA, could that be causing the problems?

    Read the article

  • VT-x not enabled on 2010 Mac Pro

    - by BlindingDawn
    To start I had a Hackintosh as per the instructions from Lifehacker.com before and moved everything to a new 2010 8 Core Mac Pro. I opted for a restore from the time machine backup rather than using the migration assistance. I believe this may have caused more problems but one in particular is the lack of VT-x support. When I checked Parallels Desktop under "Host Hardware" information, I get the following that shows that VT-x isn't enabled. <Cpu dyn_lists=""> <Number>16</Number> <Model>Intel(R) Xeon(R) CPU E5620 @ 2.40GHz</Model> <Mode>1</Mode> <Speed>2400</Speed> <VtxEnabled>0</VtxEnabled> <VtxMode>1</VtxMode> 1) Does Parallels Desktop support using VT-x? 2) Does this setting show that my VT-x isn't enabled? 3) Is there a way of fixing it so that it is enabled? 4) Is there a way of using my Time Machine backup as if I'm doing a restore using migration assistance and just restore the files and settings?

    Read the article

  • WOL doesn't work if set to anything other than `a` but this setting makes it boot all the time

    - by Elton Carvalho
    I manage a small "cluster" of 4 Xeon machines with Intel boards in my lab. They are all plugged to a 5-port 3-Com switch with static IP addresses like 10.0.0.x. They are all running OpenSuse 11.4 and their /home/ is served by one of the machines (node00) via NFS. They are plugged to an UPS that can keep them on for ca. 15 minutes, but there are lots of electric shortages due to "unscheduled maintenace" that are longer than this. So they end up being powered down without notice. If I set the BIOS to turn them on after power shortages, the issue is that they all boot at the same time and, if node00 decides to run fsck in the /home/ partition, it does not finish booting before the others try to NFS mount their /home/. I am trying to make wake on lan work, so I can choose to boot the NFS clients only after the server has successfully booted. The problem is that when I run ethtool I get an output like this: Supports Wake-on: pumbag Wake-on: g Theoretically, it is set to wake on MagicPacket(tm), according to the manual. But sending the WOL packet using wol -i 10.0.0.255 $MACADDR does not wake up the box after I shut it down with halt. The ethernet link led blinks after I send the packet, so it appears to be getting to the machine. However, if I set it up with ethtool -s eth1 wol bag, the machine always wakes up right after halting, even if I don't send the Magic packet. This means that the device can wake up with LAN activity, but seems to be ignoring the magic packet. Setting wol ag does not wake the box with the MagicPacket. Does setting wol a mean that it should boot with any broadcast message? How can I diagnose the issue of the machine not waking up with the MagicPacket even though I am sending it and it's set up to wake up with it? Thanks in advance!

    Read the article

  • Windows Media Center showing Jerky Video on PC

    - by Kris Erickson
    I had to repave my Windows 7 x64 box last week due to a hard drive crash, and for a while everything was running perfectly but now all videos in Windows Media Center are jerky (the sound is fine, they just seem to skip a ton of frames all the time). This is on the local machine, but the same thing happens when I try to stream to my Xbox. The videos all show fine in VLC and Windows Media Player (however exhibit the same problem in Quicktime). I guess I must have installed something recently (in the process of getting all the apps I usually have running on my PC) that caused this but for the life of me I can't figure it out. I have updated to the latest video driver (and then rolled back to the standard Windows 7 driver), I have rolled back all the other drivers that I have installed (I believe). I have uninstalled all the codec packs (I also run TVersity, so I have the TVersity codec pack installed), and I uninstalled TVersity. Nothing seems to help. I have uninstalled windows media center, and reinstalled it from the Programs and Features. I have basically ran out of things to try to fix this, and am almost thinking about reinstalling Windows again. Any suggestions? Edit Specs on the PC (which I figured was unimportant since everything used to work perfectly): Intel Core 2 CPU 6600 @ 2.4 Ghz Nvidia GTS 8800 Built in realtek-audio soundcard 4GB Ram Codecs which are failing: All that I have tried, but at least Xvid, Mpgv (mpeg2 video from a camera), and Wmv (only kinds that I have ready access to).

    Read the article

  • No sound out of headphone port on laptop

    - by Thanatos
    I cannot get sound out of the headphone port on a laptop. Headphones are plugged in, and sound comes out of the internal speakers. Windows behaves normally (sound switches to headphones when headphones are inserted). It did work in Linux at one point, but something changed, we're just not sure what. Rebooting doesn't fix. This appears to occur whether or not PulseAudio is running. Things I've tried: Rebooting. No effect. Booting into Windows. It works properly, so probably not a hardware issue. All of alsamixer. My only controls are this: "Master" Volume bar & mutable, unmuted. Controls volume. "PCM" Volume bar only. 100%. "S/PDIF" Mutable only, currently muted, has no effect. "S/PDIF" Default PCM", Mutable only, currently unmuted, has no effect. Killing PulseAudio. No effect. (It also won't stay dead! Something appears to be restarting it, and I can't tell what, but it is annoying as fuck.) alsactl init 0, no effect. sudo rm -f /var/lib/alsa/asound.state, no effect. General system info: Ubuntu 10.04 LTS Toshiba Satellite T135D-S1324 lspci says I have: 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller Some edits: Yes, the headphones are in all the way. This works in Windows: You plug headphones in, the internal speakers stop making noise, and noise comes out the head phones. Windows says I only have two sound cards: the HDMI port (which I don't care about) and the "sound card", which it claims is a "Conexant Pebble High Definition SmartAudio" In Windows, both the internal speakers and the headphone jack show up as one soundcard, which in my experience, is typical. (This is a laptop)

    Read the article

  • Server 2003 and XP Client; Why are HTTP connections being silently dropped.

    - by Asa Yeamans
    On my network, my edge-router, a windows 2003 r2 server router with all the latest updates, will drop packets, but only under specific circumstances. I have troubleshot and isolated it down to the most simple configuration i can. There is NO NAT involved. Only fully-public IP addresses. No Firewalls are running either, all ahve been disabled. no packet filters on any interfaces anywhere either. I have a single Windows XP virtual machine and my edge-router(the windows 2003 r2 server, and also a virtual machine) running on a windows 2008 x64 r2 system (running virtual server 2005 as i dont have Intel-VT compatible chip yet). The edge router can access any external http site just fine, no issues. However the windows XP machine is only able to access certain sites. These work: www.google.com www.txstate.edu www.workintexas.com www.thedailywtf.com . These Dont: www.yahoo.com www.utexas.edu en.wikipedia.org slashdot.org www.bing.com. I have removed all possibility of DNS issues by connecting with net-cat from the XP box and sending GET /\r\nHost: \r\n\r\n and that connection replicates the issue as well. The network setup: My statically assigned IP block: x.x.x.168/29 DSL Modem -----PPPoE Connection---- x.x.x.169[EdgeRouter] [EdgeRouter]x.x.x.170 -----Virtual Ethernet----- x.x.x.174 [Test2] Test2's Default gateway is x.x.x.170 and test2 can ping any and every valid, accessible, public IP address with no packet loss what-so-ever. If i connect directly over PPPoE from test2 (the XP box) everything works just fine... Im at my wits end, i have NO IDEA whats causing this.

    Read the article

  • Mac OS X in Virtualbox says "You need to restart your computer"

    - by humoeba
    I've been trying to figure out for the past week how to get Snow Leopard reliably running in a VM. Right now I am using VirtualBox, and it runs fine for a while, but every once in a while (happened 3 times in the last few hours) I get the "You need to restart your computer" message. Unfortunately, it hasn't even lasted long enough to finish installing the operating system yet. I first tried VMWare, which was a pain to set up. I got it running ok, operating system installed, with the guest tools. Every once in a while though, it just stops running. I click inside the VM, and there's no mouse. It doesn't respond to keyboard input either. I have to reset the VM to get a response. I'm wondering if this is the same error. This happens with both Workstation and Player. Here is the tutorial I used for VirtualBox: http://www.sysprobs.com/iboot-loader-virtualbox-install-snow-leopard Here's the tutorial I used for VMWare: http://bobhood.wordpress.com/2009/12/18/welcome-to-snow-leopard-mac-os-x-10-6-and-vmware-workstation-7/ I'm using an iso for Mac OS X 10.6.3. I have an HP Pavilion dm4 with an Intel Core i7 M640 running Windows 7; VT is turned on. Using VirtualBox 4.0.4 and VMWare Workstation 7.0.1 and VMWare Player 3.0.1 Does anyone know what might be causing this error or how I can fix it? Thanks.

    Read the article

  • keyboard intermittently stops working, even after reinstalling windows 7; possibly a Chrome issue?

    - by neverskipbreakfast
    My keyboard intermittently stops working. Sometimes a couple of keys will work, but usually none. Sometimes if I mash a couple of the ctrl+alt+windows type keys randomly for a bit, the keyboard will let me type one more letter before stopping again. Sometimes the keys will open a program menu, but usually not. I have even completely wiped my machine and reinstalled windows 7; the problem continues. Specs: Intel iMac (early 2006, 2.0GHz, 2MB RAM, 240GB HD) running ONLY Windows 7 Professional, 32-bit (NOT through boot camp) and using a USB keyboard (Saitek Eclipse II.) *Unplugging & reconnecting keyboard does NOT fix it. *Connecting a different keyboard does NOT fix it. That one won't work, either. *Drivers are up-to-date. Removing and reinstalling drivers does NOT fix it. *Restarting the computer does NOT fix it. In fact, when the Windows logon screen appears, they keyboard won't work, and neither will the icon to pull up the on-screen keyboard. Otherwise my mouse can click around just fine. I can only log onto a non-password protected account. *Generally, logging into as different Windows user fixes it. I can then log back on to my main user account and continue work for a few hours until it happens again. *Clearing my Chrome browsing data stopped the problem from recurring for a week or so. *I use Avira free antivirus software, and repeated scans turn up nothing fishy. *I have already REINSTALLED Windows 7 (not just a restore.) The problem returned after 2 days of use. The only thing I suspect is something in Google Chrome -- I used my google account to reload all my previous Chrome extensions, saved data, etc. (Chrome Extensions Installed: AdBlock, Better Google Tasks, DropBox, FB Photo Zoom, Google Mail Checker, StayFocusd.) Any ideas? Any at all?

    Read the article

  • ixgbe driver: Limit the max number of cores

    - by Shellex Wai
    I have a Linux workstation with 48 cores and runs ixgbe driver for fiber interface. And I have to test a project name Netmap on it. NetMap is a high performance network framework for high speed interfaces, which has been ported to Linux recently. For some reasons, I must try it on the machine. So I compile it and follow the instructions to run the test problems, but it doesn't work. I check dmesg and it says: [10399.085736] 794.159015 netmap_set_ringid [486] ringid o4o1 set to all 48 HW RINGS [10399.085742] 794.282011 netmap_obj_malloc [220] netmap_if request size 816 too large I asked the author of netmap for help. He told me that I have too many cores in the machine and it should work if I tell ixgbe use less cores (2 to 4 is ok). I am not familiar to driver development and I don't know how to limit the ring numbers by passing arguments to ixgbe driver. So I check the spec from intel's website but found nothing about it. So I come here for more helps. Thank you.

    Read the article

  • Poor performance on IIS7, only on Windows Server 2008, fine on Windows 7?

    - by user32005
    Hi, I'm new to IIS7 but have experience with other versions. I've been working on an application that works great in a dev environment (as always) but when I push it to a windows server 2008/IIS7 box performance takes a noticeable hit. The dev environment is Windows7/IIS7. The configuration in IIS is the same on the dev box as the server. I've tried all sorts of things to try and find a reason for this but I cant come to any conclusion. I've ruled out database problems on the live box as all data is cached after the first request. I've confirmed this to be true and made sure there is no additional database traffic. I've ruled out network issues with a combination of monitoring requests with fiddler and local debugging on the server. Whenever the code runs on the server there seems to be a performance issue. The server: Intel Core 2 Quad CPU Q6600 @ 2.40ghz with 2gb RAM. I know this is not fantastic but I was expecting it to at least perform as well as my dev environment (which is running much more on a lower spec). The CPU using peaks at under 60%, and memory usage is less than half of the available. I've enabled failed request tracing and most of the time is spent in a custom HttpModule, this module works to handle every request, I cant get any more detail as to what within the module may be causing the problem. Any ideas, I've been pulling my hair out for days now. Thanks

    Read the article

  • Booting Ubuntu as VM with KVM on Ubuntu 12.04

    - by CrazycodeMonkey
    I am trying to boot my very first VM using KVM. I have Ubuntu 12.04 installed, i made sure the BIOS had the right virtualization flag enabled for intel processor by running kvm-ok. I have researched this on google and all the instructions that i have found so far are outdated. for e.g. most instructions talk about booting a virtual machine with the following commands qemu-img create -f qcow2 foo.img 100G --- create a virtual disk for your VM kvm --name foo -m 1024 -hda foo.img -cdrom whatever.iso -boot d -- This runs kvm. This command line is incomplete. First you need to be root to run this. Second- it is missing option for the video device. When you run this command you get the following error "Could not initialize SDL(No available video device) - exiting" Googled this error and looked it up on stackover flow http://stackoverflow.com/questions/4841908/sdl-init-failure-reason-is-no-available-video-device The answer provided here does not work on Ubuntu 12.04 Googled this problem further and found out that i need to specify a video device so I finally ran the following command sudo kvm --name mymachine -m 8096 -hda myimage.img --cdrom ubuntu.iso -boot d -vga cirruss -k en-us -vmc :0 This was after I had created the myimage.img image on the drive. Now this command does not give me an error but it just hangs. Does anyone have clear instructions on how to run a VM using KVM on Ubuntu?

    Read the article

  • How can I install iTunes in such a way that it can't put any "hooks" or helper programs on my computer?

    - by Joshua Carmody
    I'm buying a new iPad, which means I must once again install iTunes. I've not used iTunes in more than 6 months, since I bought a new computer. I don't like iTunes, but I can live with using it to buy/manage media and sync my Apple devices when the program is open. What I would like to do though, is find a way to install iTunes in such a way that it has absolutely no effect on my system when it is closed. iTunes normally installs several helper programs such as iTunesHelper.exe, and the Bonjour service. These programs run in the background when iTunes is closed. You can force-close them, or remove them from your setup files, but iTunes will often put them right back when you run it. I know these programs are mostly harmless, but they have at times caused issues such as iTunes spending system resources trying to catalog media files or drives connected to VPN, or other issues. At best they're just one more small background process eating up a small piece of my CPU time and RAM. How can I run iTunes without letting it get it's "hooks" into my system? One thought I had is that I could create a Windows user account just for iTunes, and deny it admin privileges. Then if I installed iTunes using that account maybe anything it installed wouldn't affect the "main" account on my PC? But I'm not sure if that would work.... Failing that, maybe some kind of virtualization software or sandbox I could install it in? I'm open to any suggestions. My system is an Intel-based PC running Windows 7 Professional 64-bit. Thanks!

    Read the article

  • Windows 7 Blank Screen on Boot / Login

    - by Greg
    I have a new system that's having a few problems... sometimes (seems to be when the PC is cold, i.e. has been switched off for a while, though that could be my imagination) I get a blank blue screen when I boot up. The system boots normally and auto-logs-in. The desktop loads and I'm even able to launch applications, but then everything disappears and the screen goes to the default windows desktop blue colour (not the desktop image, just a plain blue with no mouse cursor). At this point the machine completely locks up - I'm unable to even toggle Num Lock and have to hold in the power button for 5 seconds to kill it. Interestingly if I manage to launch some applications before it goes blank, they will usually crash... sometimes explorer.exe will crash too. When I reboot, the system is fine and stable. I've installed the latest graphics drivers and run memtest86+ for 6 passes (and counting) with no errors. The system specs are: CPU: Intel I7 2.66 @ 3.4GHz RAM: 6GB (3 * 2GB DDR3) HDD: 128GB Crucial M225 SSD Motherboard: Gigabyte EX58-UD3R Gfx: ATI Radeon Sapphire 5870 1GB Note: There are a few similar questions but I haven't found one that matches my symptoms

    Read the article

< Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >