Search Results

Search found 14377 results on 576 pages for 'video card'.

Page 145/576 | < Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >

• How to play games in widescreen in Windows 7, Dell Studio 1555

  - by blasteralfred

  I have a dell studio 1555 laptop with a GPU inside. The details are below; Hardware details Software details I can play games in widescreen in Vista, but not in 7. I am using Windows 7 Home Premium. I have the latest Catalyst Control Center. Instead of widescreen, the games are running in a classic style, say 1024x768 ratio. When I play need for speed underground, the maximum possible resolution is 1024x768 (all other games are like this). I have no problem with HD videos and anything else. How can I fix this? Thanks in advance...:)

  Read the article

• refresh screen rate ubuntu

  - by user24224

  Hello all I am having problems with the refresh rate if the screen . In the the refresh mode of the monitor in the monitor options have only one option 60Hz. I have LG 24 + ATI Radon 3870. And already installed the ati driver via ubuntu download centre. Any idea how i solve that one ? Thanks.

  Read the article

• GPU not powering on

  - by Lerp

  So I got home from work yesterday and went to turn my computer on as per usual to be greeted by this: The screens remained black, so I rebooted; I go as far as GRUB before my screens went black again. I rebooted again, they didn't turn on. I rebooted again, I got as far as the windows login screen. This time I unplugged it, opened it up and cleaned it but to no luck. The GPU was still being tempermental. I repeated the process of turning off and on several times until one time it work as normal. I happily played games for the rest of the night (5-6 hours?) thinking everything was jolly good now. Well I get home from work today and it is doing the SAME thing. Sometimes everything displays normally for a few seconds to minutes then the screens go black; then sometimes the screens don't come on at all. Summary and additional points Screens sometimes turn on before shortly turning off, sometimes they don't; I cannot seem to determine any pattern between when they do or do not turn off. The build has been working fine for about 8 months now so I know it's not hardware incompatibility. If I plug a monitor into the on board graphics I can use the PC normally (just in low graphics mode) I have two monitors and it's a case of they both turn on or not. So I think I can rule out the monitors being dead. I have tried replacing the GPU I have tried replacing the RAM I have tried flashing the CMOS I have tried cleaning the inside The GPU is a Radeon HD 7870 My questions Is my GPU dead? It's not very old and I would rather have a method of being certain it's the GPU before I fork out some money I can't really afford. I do not have a second PC here to test it in. If my GPU is dead why does it sometimes work and sometimes not? Update Okay, it was working again.. at least I thought it was. I left it running for 10-20minutes with the screens black. Turned it off and straight back on and it worked for all of 10minutes. I was then updating the post in joy thinking I could play some games for the rest of the night when BAM it went black again. So yeah, I don't know :C

  Read the article

• Cam being used by another application

  - by w35t

  On my laptop doesn't work any camera. I get error: "Camera being used by another application"". I don`t known which program using it. I tried use software like "SplitCam" or "ManyCam". Also I reinstalled K-lite codec to newest, but still getting this error. I get the same error when I turn my Canon video camera to laptop using firewire cable. OS: Windows 7 x64 Camera: Creative (i don`t find which model) Laptop: DELL inspiron 1520 Error when I tried open SplitCam: http://f.imagehost.org/0759/Clipboard03.png SplitCam error when repair it: http://i.imagehost.org/0607/split.png ManyCam just not responding. SonyVegas error: http://f.imagehost.org/0227/Clipboard05.png Sorry for my English. Thanks for any help.

  Read the article

• How to use "Join Clip" in iMovie'09?

  - by deddebme

  I have been using iMovie'09 for two days only. I need to edit some videos and make a DVD for a friend. It happens to me that I want to join two clips together to form one continuous clip, so when I export the video to iDVD, they won't be treat as two different chapters. The most obvious way to do so is to choose Edit-Join Clip, but that menu item was always gray out when I chose two adjacent clips. I tried to highlight two/three adjacent clips, two apart clips etc, but it is still grayed out. I googled for a while but it seems no one knows, anyone knows how to use the "Join Clip"?

  Read the article

• Screen refresh rate in Ubuntu

  - by user24224

  I am having problems with the refresh rate if the screen . In the the refresh mode of the monitor in the monitor options have only one option 60Hz. I have LG 24 + ATI Radon 3870, and have already installed the ATI driver via Ubuntu download center. Any idea how I solve that one? Thanks.

  Read the article

• Seeking webcam with own IP address

  - by Mawg

  I am not sure if this is the correct place to post, but I couldn't find anywhere better. I am looking for a webcam/movie cam and this site seems more addressed to still images, but ... I am looking for a small, rugged web-cam which can be hand-held or perhaps head-mounted (failing that I can settle for a tripod mount, but I need portability). It must have its own IP address so that anyone can view its video stream from a web browser. I would prefer 2 way voice communication too. Encryption of data is nice, as is compression (H.264). Maybe also remote control, like causing it to zoom from the browser. Does anyone have any suggestions, even suggestions of somewhere else to look? Thanks very much in advance.

  Read the article

• mplayer dumpstream sometimes fails

  - by User1

  I'm trying to rip the video at http://videolectures.net/ecml07%5Fgetoor%5Fisr/, so I can play it at a faster speed. I paste http://193.2.4.216/2007/pascal/ecml07%5Fwarsaw/getoor%5Flise/ecml07%5Fgetoor%5Fisr%5F01.wmv into a firefox browser in Windows and MediaPlayer plays the thing. However if I try mplayer -dumpstream, it gets stuck into an infinite loop trying to play the file. If I use wget to download the link, I get a small text file which basically points to the same URL. How can I get mplayer to download this stream?

  Read the article

• How to uninstall AMD Display Driver from other install of Windows

  - by nar

  So my Windows 7 had a BSOD from an Ati driver file then restarting only gives me some wierd coloured lines at the top of the screen. Starting in safe mode causes the boot up to freeze at AtiPcie.sys and overlays the same coloured lines on the safe mode start up display. It seems to be a problem with the display driver but I can't get into the OS at all to uninstall it. Luckily I have an old install of Windows 7 from when I moved to a SSD still on my HDD and that runs just fine so I'm pretty sure its a software problem (Maybe the SSD corrupted a driver file or something). So does anyone know how I can uninstall the driver files from another Windows 7 install on the same PC? EDIT: What I mean is, I'm running on the broken PC right now but using a different HDD's windows install. I have full access to the not booting up OS drive with the Windows so I can delete any files/load the registry etc...

  Read the article

• Best FFDShow settings for upscaling SD content to 1080p HD?

  - by Richard

  Hi there, I'm running Windows Media Center 7 with ffdshow-tryouts for the decoding of many of the popular video formats. It works great. I've now upgraded my television from SD to 1080p HD and, naturally, I've still got a large number of existing MP4/XviD/DivX items of content which is in SD. I'd like, therefore, to modify the settings of ffdshow so that they are upscaled to 1080p as best as possible. I appreciate that they won't be as good as their HD equivalent - but on the flip side, I'm pretty certain I can do more than just resizing the picture to get the best possible output. Can anyone recommend the best settings in ffdshow to do this? For example, should I apply a sharpen mask? Or Noise Reduction? Or Deinterlace? Alternatively, would it be better to keep them at their current resolution and let the TV (Samsung Series 5 LE32C580) do the upscaling? Thanks.

  Read the article

• Are there compact external USB audio interfaces which are better than a on-board sound?

  - by rumtscho

  I am asking this for a friend. He loves his voice recognition software and dictates a lot of text using a headset. Now he has a new laptop, which only has a combined mic/headphones output, and wanted to buy an adapter. I told him to get an external USB sound interface instead, as the better sound quality will probably increase the hit rate of the voice recognition. He agreed, but when he saw a picture of the SoundBlaster X-Fi, he said that it is way too big, because he wants to carry the thing everywhere. He'd rather have one of these small things which are the size of a flash memory stick, with only one mic and one phones output, period. Now I am not sure whether these mini interfaces would produce a sound better than onboard sound. They all seem to come not from established audio interface manufacturers, but from electronic accessories manufacturers like Speedlink, or just noname brands. Is there a compact audio interface with good A/D quality (it is OK if the price is comparable to that of the bigger interfaces, even if there is no additional functionality like Chinch in-/output etc)?. And if there isn't, will the noname soundcardsticks offer any advantage over a simple adaptor for the onboard sound?

  Read the article

• How can I split a stereo audio track of a movie into two separate audio tracks?

  - by pesche

  I often record TV shows with a hard disk recorder/DVD writer, burn them as VRO file and convert to MP4 with Handbrake. The shows are bilingual broadcasts with two mono audio channels instead of a stereo one: dubbed voice on the left, original voice on the right. The TV set and VLC are both perfectly capable to play only the left or the right channel, but other video players may just offer to select between different stereo audio tracks (like they are present on many DVDs). I'd like to have an easy process to create MP4 or MKV files of these shows where the two audio channels are split into two separate audio tracks. The only way that I know of is to extract the audio track (e.g. using MPEG Streamclip), split it into two tracks using an audio tool like Audacity and then merge the audio tracks back (using a DVD authoring software, don't remember all details). Clearly not a thing to repeat regularly. Preferably a solution should run on Mac OS X, but Linux or Windows solutions are very welcome, too.

  Read the article

• Lenovo t400 laptop docking station with DVI out shows green artifacts when connected to monitor

  - by Roy Rico

  I have a Lenovo T400 laptop, with Windows XP. I have a docking station connected via DVI to my Samnsung monitor. I'm connected at 1920x1200 resolution and I keep seeing all these green dots (when colors are supposed to be near black). It's really bad. I have tried running on my Samsung monitor, at all sizes, even down town 1280x1024 like my monitors at work. When I use the docking station at work, I am able to connect 2 1280x1024 NEC monitors (one via DVI, one through VGA, both through my docking station). I have absolutely no issue there, both displays work great. I have tried to update the drivers, I've even installed the latest video drivers from lenovo's site (DEC-02-2010). Is anyone familiar with this issue? Details: Docking Station: Lenovo Advanced Mini Dock- 250410U - NIB Montior at home: Samsung T240 24-inch monitor Monitors at work: NEC monitors

  Read the article

• graphic error on console

  - by Christian Elsner

  I have Linux on an embedded system. There is no graphic system, but I still have graphic errors. For example, if I type: ifconfig eth2 hw ether 00:0e:8c:d0:59:d2 I see: ifconfig eth hw ether 00:0e:8:2:2 If I type Enter, it accepts the command I typed, so it's just a matter of displaying. Everything is fine, when I log in via SSH. Anyone any ideas, what could be the cause or where to look at? Output of lspci: 00:00.0 Host bridge: Intel Corporation 3100 Chipset Memory I/O Controller Hub 00:00.1 Unassigned class [ff00]: Intel Corporation 3100 DRAM Controller Error Reporting Registers 00:01.0 System peripheral: Intel Corporation 3100 Chipset Enhanced DMA Controller 00:02.0 PCI bridge: Intel Corporation 3100 Chipset PCI Express Port A 00:03.0 PCI bridge: Intel Corporation 3100 Chipset PCI Express Port A1 00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 2 (rev 01) 00:1d.0 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 01) 00:1d.7 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c9) 00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 631xESB/632xESB/3100 Chipset SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller (rev 01) 02:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 03:01.0 Network controller: Siemens Nixdorf AG Device 4003 (rev 02) 03:01.1 Unassigned class [ff00]: Siemens Nixdorf AG Device 4003 (rev 02) 03:02.0 Ethernet controller: Siemens Nixdorf AG Device 4047 (rev 01) 03:03.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller 03:04.0 Unassigned class [ff00]: Siemens Nixdorf AG Device 4057 (rev 01) 04:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge (rev 03) 05:00.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 44) 06:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge (rev 03) 07:00.0 VGA compatible controller: Silicon Motion, Inc. SM720 Lynx3DM (rev c1) 07:01.0 USB Controller: NEC Corporation USB (rev 43) 07:01.1 USB Controller: NEC Corporation USB (rev 43) 07:01.2 USB Controller: NEC Corporation USB 2.0 (rev 04) The whole thing is running on an Intel Core 2 Duo U2500

  Read the article

• Simplest way to add stills to MP3 audio soundtrack

  - by Ambrose

  I have some audio and want to add visuals to it and upload to YouTube. Nothing fancy, just like slides, image_A from 00:00:00 to 00:00:05 then image_B from 00:00:50 to 00:00:30 and so on. I have recent Mac and Windows machines to do this on. I'd like to do it on free or demo software if I can. Please give a bit of a hint how to get started if you can. I took a look a iMovie, but ... where to start, if you haven't actually got video?

  Read the article

• Artefacts during HDV capture

  - by Jakub Konecki

  When I try to capture HDV video stream from a Canon HV20 camera to a Dell Studio 1558 (Intel i7 720qm) laptop running Win 7 Home Premium x64, the image appears with a very annoying noise - it contains block artefacts. Something is wrong with the Fire Wire controller (Ricoh 1304 OHCI host controller, build-in). Tried changing the driver to legacy one to no avail. This does not happen with DV stream. I'm using a Belkin cable. The capture works OK on another machine.

  Read the article

• Chipset GPU causes a massive slowdown

  - by zyboxenterprises

  My AMD Radeon HD 7700 recently broke (fan stopped working and GPU overheated), and now I'm running on internal chipset graphics, and it causes a massive slowdown of the whole PC. I've changed the graphics memory from 32MB (minimum) to 256MB (highest), and it hasn't made any difference whatsoever. I'm using Windows Aero, and disabling it should have made a small difference, but it didn't; the whole PC is still slow. I know that it's not the computer build, because I built it myself, and it was a lot faster when it had the AMD Radeon HD 7700 in it, which is the reason why I believe it's the internal chipset graphics that are causing the problem. Is this behavior normal? I don't have the cash right now to go out and buy a new dedicated GPU. I'm using an ASRock N68C-GS FX motherboard with an AMD FX 4100 (overclocked to 4.3GHZ), with 4GB RAM. The overclock was an attempt to resolve this issue, and it isn't related to this issue that the integrated graphics is causing a slowdown.

  Read the article

• Screen occasionally flashes black when under load, sometimes does not recover

  - by Oak

  I've built a brand new machine, but to my horror my monitor occasionally flashes black for around a second, then returning to normal. This happens under load (watching videos / playing games) but only sometimes; e.g. it doesn't occur in "Batman: Arkham City" but does in "XCOM: Enemy Unknown". When watching videos, it also occurs when not watching them full-screen, and it sometimes even occurs when the machine isn't doing anything, just sitting at the desktop and moving the mouse around. Has anyone ran into this problem and knows of any solution? Additionally, sometimes after the black screen, it won't return to normal, instead turning completely corrupt. In these cases even quitting the application doesn't help, but physically disconnecting and reconnecting the monitor fixes the problem. This problem did not occur on my earlier machine which used the same physical monitor. Additional details: Windows Server 2012, configured as Windows 8, with latest updates installed NVIDIA GeForce GTX 660 Ti, with latest driver installed Ample amounts of CPU and RAM for playing the above games and for watching videos. I've read about similar problems elsewhere but could not find a working solution: http://www.youtube.com/watch?v=Zt00C-HXFbA&noredirect=1 http://www.sevenforums.com/hardware-devices/59126-monitor-flashing-black.html https://eu.battle.net/d3/en/forum/topic/4079098908?page=4 http://www.tomshardware.com/forum/347422-33-screen-flickering-black-nvidia-driver-update

  Read the article

• Samsung S23A750D 23" 120Hz get no signal

  - by John Carter

  I have a few days ago received this monitor. Samsung S23A750D 23" 120Hz I am using it with a Gainward Nvidia GTX570 Phantom GPU via DisplayPort cabling. The trouble I am having is that the monitor has great trouble picking up a signal from the GPU when the computer has gone into sleep mode or been switched off (at this point I can get a signal to the monitor). It's only when I turn the computer back on and then the monitor that I get no signal. To get a signal I have to remove the power cable and put back in or sometimes remove the DP cable and put back in. I have tried not turning the monitor off (the monitor goes into a sleep mode when the computer goes into sleep mode) but on putting the computer on it does not pick up a signal. It is only by removing the power cable and/or DisplayPort cable will I get a signal. And this is intermittent. I have tried upgrading the firmware from Samsung but this hasn't helped. Any ideas?

  Read the article

• Mass editing videos on Ubuntu?

  - by rick

  Hi, I'm trying to add a watermark and a credits image to all of my old videos. I downloaded them off YouTube so they are all flv (H.264?). Is there some software that will allow me do simple edits in batches? I know a little bit of Python and tried looking at some of the library but they all seem like overkill (and way above my head). So is there a solution besides getting some software and going through all my videos and doing it manually? They are all mostly the same length, but it would be nice to specify a relative position for my credits. e.g. show a static image for 10 seconds when the video is at 95%

  Read the article

• Linux Mint Debian Cinammon soundcard selection

  - by Peter Gridling

  i use said OS and i am missing a window or setting to set the default soundcard. I have a builtin analog soundcard which works just fine and is set as default, also i have a usb headset which works fine eg. with mumble i set input and output on my headset and it just works, also the mute button and volume control on the headset works, but on the default soundcard lol. what i am missing is to set my headset as the default soudcard. i also tried some stuff from there: http://wiki.debian.org/ALSA/ but it seems that alsa is not supported 100% :( some1 here to help? best regards

  Read the article

• How to prevent stretching, blurring and pixelating of embedded logos in VirtualDub?

  - by NoCanDo

  Howdy, take a look at this please http://www.youtube.com/watch?v=te-HVN8y_QE&hd=1 . Notice the embedded "logo" in the upper left corner? How blurry and pixelated it is? This is the original image: http://i.imagehost.org/0148/movie_watermark.png ! The stretching, blurring, pixelating etc. most likely comes from resizing the original video from 1920x1200 to 1280x720 and encoding it with h.264. Can anyone tell me how I can prevent the blurring, unsharpening and pixelating and retain their original quality? How do I exclude the logo from the whole encoding process and just slap it there in its original format and form?

  Read the article

• For Intel cpu , if chipset and motherboard are also from intel then it will give best performance. I

  - by metal gear solid

  I'm going to purchase Intel® Core™2 Duo Processor E7500 (3M Cache, 2.93 GHz, 1066 MHz FSB) and for motherboard my local vendor suggesting me to purchase Intel DG41RQ MB motherboard and he is also saying if i'm purchasing Intel CPU then purchasing Intel's Own motherboard with intel chipset will give best performance. Is it true? To get good inbuilt graphic I'm thinking to purchase nvidia chipset based motherboard of any other company like Asus, Gigabyte, MSi etc. is it ok? Although i never play games on my PC but thinking Inbuilt Nvidia graphics will be better for running Photoshop and watching movies then Intel's inbuilt graphics. or it's ok to purchase Intel DG41RQ MB motherborad as suggested by local vendor. Intel's inbuilt graphics would be enough for Photoshop and Watching movies. If you know any other good motherboard for Intel® Core™2 Duo Processor E7500 (3M Cache, 2.93 GHz, 1066 MHz FSB) then tell.

  Read the article

• Realtek "Microphone Effects" no longer working

  - by abc

  I have a mic plugged into my computer, and I was able to use the "microphone effects" tab here to enable/disable noise suppression and acoustic echo cancellation. Noise suppression off and acoustic echo cancellation on were the most recent settings I had on before the problem occurred. I disabled my mic in the windows 7 "recording devices" tab, then re-enabled it. When it came back, these options were grayed out, and remained so even after a reboot. I am not sure why this is or how to fix it, all other options are still the same (Settings are identical to when it was working). Any ideas whats wrong or how to fix it? edit: can't post image due to being new.

  Read the article

• No audio device detected

  - by Paul

  My computer has no audio. It says NO AUDIO DEVICE. I already installed Realtek AC97 and Realtek High Definition Audio Driver and I also pasted stream.dll to the Windows and system32 folders and I restarted my computer but it still says NO AUDIO DEVICE. Please help me. Thanks

  Read the article

< Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >