Search Results

Search found 5852 results on 235 pages for 'ram kumar sharma'.

Page 146/235 | < Previous Page | 142 143 144 145 146 147 148 149 150 151 152 153  | Next Page >

  • Windows 7 installation reboot loop

    - by Auswoolf
    Upgrading from Vista home premium to win 7 hoe premium from DVD ex Digital river on gigabyte VM900m; core 2 duo 2.13GHz 2GB ram; Western digital 250GB HD. Got as far as "Expanding Windows files ...100% the error message "Computer encountered unexpected error... To install windows press OK to restart computer and reinstall windows" The computer then reboots, loads Windows 7 (new logo) a essage that says "setup is starting services" then the error message comes back. I can get into BIOS to change boot priority but the computer just ignores this and goes through the same sequence. At the point of "to boot from CD/DVD press any key" my keyboard is deactivated and i cannot make a choice and the sae sequence occurs. I cannot break the sequence - I have push every key, disconnected every external device including HDMI screen, but nothing stops the loop. Any ideas? Auswoolf

    Read the article

  • What does the "Max Memory Size" on the new Intel Core i3 / i5 / i7 CPU's mean?

    - by Josh
    I just noticed in the specs of the new Intel Core i-series processors that there is a "Max Memory Size" that is usually pretty small -- anywhere from 8GB to 24GB. See here: http://ark.intel.com/Product.aspx?id=41316 Core 2-based motherboards were just starting to roll out support for 32GB and greater memory sizes. Anyone have any idea what the Max Memory Size indicates? Is this the total limitation of the on-chip memory controller? Limitation per channel? Limitation per stick (e.g. density??)? Thinking of building a decent machine that needs lots of RAM, so I'm looking at the i7 860.

    Read the article

  • Apache out of memory on

    - by Sherif Buzz
    Hi all, I have a VPS with 768 MB RAM and a 1.13 GHZ processor. I run a php/mysql dating site and the performance is excellent and server load is generally very low. Sometimes I place ads on Facebook and at peak times I can get 100-150 clicks within a few seconds - this causes the server to run out of memory : Cannot allocate memory: couldn't create child process: /opt/suphp/sbin/suphp .... And all users receive an error 500 page. I am just wondering if this sounds reasonable or not - to me 100-150 does not seem to be a number that should cause apache to run out of memory. Any advice/recommendations how to diagnose the issue highly appreciated.

    Read the article

  • apache performance improvements and maxclients

    - by updog
    I know this has been asked a few (thousand) times around the internet but I was hoping someone whose in the know might be able to comment on my particular setup. I have a web server hosting one site (php/codeigniter) with a wordpress blog in a sub directory. The server has 2GB RAM, 3GHz CPU and I have offloaded the static assets to CloudFlare which is has reduced bandwidth for the actual server by almost 75%. The problem I have is when an email campaign is sent out that links to the site or blog, it slows down. Below is my settings in apache2.conf. Average apache process size is 80M and there is 1.5GB available for apache. <IfModule mpm_prefork_module> StartServers 8 MinSpareServers 5 MaxSpareServers 20 MaxClients 20 MaxRequestsPerChild 2000 </IfModule> I have already setup and installed apc and built some caching into the site and used w3totalcache on the blog. The number of concurrent users is around 2-300 when there is a campaign, are there any further optimisations before

    Read the article

  • MaxClients, Server Limits etc

    - by Moe
    Hello, I'm having some problems with my Server. It's getting quite a bit of traffic and is very slow, and sometimes inaccessible by my users. Here are the server specs: CPU: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz - 16 Processors RAM: 2GB The Values for the Apache Config are: StartServers: 5 MaxSpareServers: 10 MinSpareServers: 5 MaxClients: 150 ServerLimit: 256 MaxRequestsPerChild: 1000 KeepAlive: On KeepAliveTimeout: 5 MaxKeepAliveRequests: 100 TimeOut: 300 What would be optiminal values for a server of my configuration to support the maximum amount of users at a reasonable speed without killing the server! Thank you.

    Read the article

  • What's a good Linux distro for an older PC?

    - by jdamae
    I'm new to Linux and I am interested in installing it on an older computer I have. I want to set a web server up, and install PHP and Perl on it. My PC is an older HP Pavilion a255c, with an Intel Pentium 4 processor and 512 MB of RAM. I will probably add some more memory later. This PC is more like a sandbox than anything, but I would like to get started quickly with the OS. Is there a particular flavor of Linux I would need to download because I have an old computer? I was thinking about Ubuntu, but I'm not sure what version to go with.

    Read the article

  • How to monitor CPU usage and performance on a Hyper-V server with several VM's

    - by Bjørn
    Hello, I have a server that is running Windows 2008 64 bit Hyper-V, with 8 gigs of RAM and Intel Xeon X3440 @ 2.53 Ghz, which gives me 8 logical cores in the performance monitor on the host system. I have set up three Virtual Machines, all running Windows 2008 32 bit. Build server, running Team City Staging server SQL Server, running SQL Server 2005 I have some troubles with the setup in that the host monitor remains responsive at all times, even though the VM's are seemingly working at 100% cpu and are very sluggish and unresponsive. (I have asked a separate question about that.) So the question here is: What is the best way to monitor how the physical CPU's are actually utilized? The reason I am asking is that I am being told that i cannot reliably use the task manager to monitor CPU usage in a VM.

    Read the article

  • Good jquery pagination plugin to use with json Data...

    - by bala3569
    I am looking for a good jquery pagination plugin to use in my aspx page.... I have the following parameters currentpage,pagesize,TotalRecords,NumberofPages... I would like my plugin to same as stackoverflow paging .... EDIT: It should paginate through json data.... similar to this I use my json data and iterating with jquery var jsonObj = jQuery.parseJSON(HfJsonValue); for (var i = jsonObj.Table.length - 1; i >= 0; i--) { var employee = jsonObj.Table[i]; $('<div class="resultsdiv"><br /><span class="resultName">' + employee.Emp_Name + '</span><span class="resultfields" style="padding-left:100px;">Category&nbsp;:</span>&nbsp;<span class="resultfieldvalues">' + employee.Desig_Name + '</span><br /><br /><span id="SalaryBasis" class="resultfields">Salary Basis&nbsp;:</span>&nbsp;<span class="resultfieldvalues">' + employee.SalaryBasis + '</span><span class="resultfields" style="padding-left:25px;">Salary&nbsp;:</span>&nbsp;<span class="resultfieldvalues">' + employee.FixedSalary + '</span><span style="font-size:110%;font-weight:bolder;padding-left:25px;">Address&nbsp;:</span>&nbsp;<span class="resultfieldvalues">' + employee.Address + '</span></div>').insertAfter('#ResultsDiv'); } There are 25 divs in my page as a result i want to show first five divs in page 1 and so on... Any suggestion... My HfJsonValue contains the following json data {"Table" : [{"Emp_Id" : "3","Identity_No" : "","Emp_Name" : "Jerome","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Supervisior","Desig_Description" : "Supervisior of the Construction","SalaryBasis" : "Monthly","FixedSalary" : "25000.00"},{"Emp_Id" : "4","Identity_No" : "","Emp_Name" : "Mohan","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Acc ","Desig_Description" : "Accountant","SalaryBasis" : "Monthly","FixedSalary" : "200.00"},{"Emp_Id" : "5","Identity_No" : "","Emp_Name" : "Murugan","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Mason","Desig_Description" : "Mason","SalaryBasis" : "Weekly","FixedSalary" : "150.00"},{"Emp_Id" : "6","Identity_No" : "","Emp_Name" : "Ram","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Mason","Desig_Description" : "Mason","SalaryBasis" : "Weekly","FixedSalary" : "120.00"},{"Emp_Id" : "7","Identity_No" : "","Emp_Name" : "Raja","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Mason","Desig_Description" : "Mason","SalaryBasis" : "Weekly","FixedSalary" : "135.00"},{"Emp_Id" : "8","Identity_No" : "","Emp_Name" : "Raja kumar","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Mason Helper","Desig_Description" : "Mason Helper","SalaryBasis" : "Weekly","FixedSalary" : "105.00"},{"Emp_Id" : "9","Identity_No" : "","Emp_Name" : "Lakshmi","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Mason Helper","Desig_Description" : "Mason Helper","SalaryBasis" : "Weekly","FixedSalary" : "100.00"},{"Emp_Id" : "10","Identity_No" : "","Emp_Name" : "Palani","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Carpenter","Desig_Description" : "Carpenter","SalaryBasis" : "Weekly","FixedSalary" : "200.00"},{"Emp_Id" : "11","Identity_No" : "","Emp_Name" : "Annamalai","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Carpenter","Desig_Description" : "Carpenter","SalaryBasis" : "Weekly","FixedSalary" : "220.00"},{"Emp_Id" : "12","Identity_No" : "","Emp_Name" : "David","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Steel Fixer","Desig_Description" : "Steel Fixer","SalaryBasis" : "Weekly","FixedSalary" : "220.00"},{"Emp_Id" : "13","Identity_No" : "","Emp_Name" : "Chandru","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Steel Fixer","Desig_Description" : "Steel Fixer","SalaryBasis" : "Weekly","FixedSalary" : "220.00"},{"Emp_Id" : "14","Identity_No" : "","Emp_Name" : "Mani","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Steel Helper","Desig_Description" : "Steel Helper","SalaryBasis" : "Weekly","FixedSalary" : "175.00"},{"Emp_Id" : "15","Identity_No" : "","Emp_Name" : "Karthik","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Wood Fixer","Desig_Description" : "Wood Fixer","SalaryBasis" : "Weekly","FixedSalary" : "195.00"},{"Emp_Id" : "16","Identity_No" : "","Emp_Name" : "Bala","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Wood Fixer","Desig_Description" : "Wood Fixer","SalaryBasis" : "Weekly","FixedSalary" : "185.00"},{"Emp_Id" : "17","Identity_No" : "","Emp_Name" : "Tamil arasi","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Wood Helper","Desig_Description" : "Wood Helper","SalaryBasis" : "Weekly","FixedSalary" : "185.00"},{"Emp_Id" : "18","Identity_No" : "","Emp_Name" : "Perumal","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Cook","Desig_Description" : "Cook","SalaryBasis" : "Weekly","FixedSalary" : "105.00"},{"Emp_Id" : "19","Identity_No" : "","Emp_Name" : "Andiappan","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Watchman","Desig_Description" : "Watchman","SalaryBasis" : "Weekly","FixedSalary" : "150.00"}]}

    Read the article

  • Paging Through Records(json data) Using jQuery...

    - by Pandiya Chendur
    I have a JSON result that contains numerous records. I'd like to show the first five records in one page and create pager links which have to move to that page with five record so on. I don't want the page to refresh which is why I'm hoping a combination of JavaScript and jQuery... My json Data looks like this... {"Table" : [{"Emp_Id" : "3","Identity_No" : "","Emp_Name" : "Jerome","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Supervisior","Desig_Description" : "Supervisior of the Construction","SalaryBasis" : "Monthly","FixedSalary" : "25000.00"},{"Emp_Id" : "4","Identity_No" : "","Emp_Name" : "Mohan","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Acc ","Desig_Description" : "Accountant","SalaryBasis" : "Monthly","FixedSalary" : "200.00"},{"Emp_Id" : "5","Identity_No" : "","Emp_Name" : "Murugan","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Mason","Desig_Description" : "Mason","SalaryBasis" : "Weekly","FixedSalary" : "150.00"},{"Emp_Id" : "6","Identity_No" : "","Emp_Name" : "Ram","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Mason","Desig_Description" : "Mason","SalaryBasis" : "Weekly","FixedSalary" : "120.00"},{"Emp_Id" : "7","Identity_No" : "","Emp_Name" : "Raja","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Mason","Desig_Description" : "Mason","SalaryBasis" : "Weekly","FixedSalary" : "135.00"},{"Emp_Id" : "8","Identity_No" : "","Emp_Name" : "Raja kumar","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Mason Helper","Desig_Description" : "Mason Helper","SalaryBasis" : "Weekly","FixedSalary" : "105.00"},{"Emp_Id" : "9","Identity_No" : "","Emp_Name" : "Lakshmi","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Mason Helper","Desig_Description" : "Mason Helper","SalaryBasis" : "Weekly","FixedSalary" : "100.00"},{"Emp_Id" : "10","Identity_No" : "","Emp_Name" : "Palani","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Carpenter","Desig_Description" : "Carpenter","SalaryBasis" : "Weekly","FixedSalary" : "200.00"},{"Emp_Id" : "11","Identity_No" : "","Emp_Name" : "Annamalai","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Carpenter","Desig_Description" : "Carpenter","SalaryBasis" : "Weekly","FixedSalary" : "220.00"},{"Emp_Id" : "12","Identity_No" : "","Emp_Name" : "David","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Steel Fixer","Desig_Description" : "Steel Fixer","SalaryBasis" : "Weekly","FixedSalary" : "220.00"},{"Emp_Id" : "13","Identity_No" : "","Emp_Name" : "Chandru","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Steel Fixer","Desig_Description" : "Steel Fixer","SalaryBasis" : "Weekly","FixedSalary" : "220.00"},{"Emp_Id" : "14","Identity_No" : "","Emp_Name" : "Mani","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Steel Helper","Desig_Description" : "Steel Helper","SalaryBasis" : "Weekly","FixedSalary" : "175.00"},{"Emp_Id" : "15","Identity_No" : "","Emp_Name" : "Karthik","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Wood Fixer","Desig_Description" : "Wood Fixer","SalaryBasis" : "Weekly","FixedSalary" : "195.00"},{"Emp_Id" : "16","Identity_No" : "","Emp_Name" : "Bala","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Wood Fixer","Desig_Description" : "Wood Fixer","SalaryBasis" : "Weekly","FixedSalary" : "185.00"},{"Emp_Id" : "17","Identity_No" : "","Emp_Name" : "Tamil arasi","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Wood Helper","Desig_Description" : "Wood Helper","SalaryBasis" : "Weekly","FixedSalary" : "185.00"},{"Emp_Id" : "18","Identity_No" : "","Emp_Name" : "Perumal","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Cook","Desig_Description" : "Cook","SalaryBasis" : "Weekly","FixedSalary" : "105.00"},{"Emp_Id" : "19","Identity_No" : "","Emp_Name" : "Andiappan","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Watchman","Desig_Description" : "Watchman","SalaryBasis" : "Weekly","FixedSalary" : "150.00"}]} And as of now my result looks like this, http://img401.imageshack.us/img401/2500/yuidtsum.jpg I have used jquery for this, var jsonObj = JSON.parse(HfJsonValue); for (var i = jsonObj.Table.length - 1; i >= 0; i--) { var employee = jsonObj.Table[i]; $('<div class="resultsdiv"><br /><span class="resultName">' + employee.Emp_Name + '</span><span class="resultfields" style="padding-left:100px;">Category&nbsp;:</span>&nbsp;<span class="resultfieldvalues">' + employee.Desig_Name + '</span><br /><br /><span id="SalaryBasis" class="resultfields">Salary Basis&nbsp;:</span>&nbsp;<span class="resultfieldvalues">' + employee.SalaryBasis + '</span><span class="resultfields" style="padding-left:25px;">Salary&nbsp;:</span>&nbsp;<span class="resultfieldvalues">' + employee.FixedSalary + '</span><span style="font-size:110%;font-weight:bolder;padding-left:25px;">Address&nbsp;:</span>&nbsp;<span class="resultfieldvalues">' + employee.Address + '</span></div>').insertAfter('#ResultsDiv'); } My image contains only 6 records as of now.. Any suggestions?

    Read the article

  • Tunnel only one program (UDP & TCP) through another server

    - by user136036
    I have a windows machine at home and a server with debian installed. I want to tunnel the UDP traffic from one (any only this) program on my windows machine through my server. For tcp traffic this was easy using putty as a socks5 proxy and then connecting via ssh to my server - but this does not seem to work for UDP. Then I setup dante as a socks5 proxy but it seems to create a new instance/thread per connection which leads to a huge ram usage for my server, so this was no option either. So most people recommend openvpn, so my question: Can I use openvpn to just tunnel this one program through my server? Is there a way to maybe create a local socks5 proxy on my windows machine and set it as a proxy in my program and only this proxy then will use openvpn? Thank you for your ideas

    Read the article

  • Xenserver boot error

    - by Adrian
    I'm trying to get Xenserver 5.5 running on a spare computer here, hardware specs: Intel Q6600, 4GB Ram, and Gigabyte GA-P35-DS3R motherboard Xenserver itself installs fine onto a 150GB sata hdd, however it fails to boot whatsoever, giving this garbled mess: http://img697.imageshack.us/img697/9918/biosi.jpg it's not frozen because if I press enter it just prints a different garble and it also says "could not find kernel image". The strangest thing is if I put that hdd in my desktop and assign it to a VMWare desktop vm (under the ESX profile no less) it boots perfectly... leading me to believe there are no problems with the install or the hdd itself. From what I can tell the error seems to be occuring completely seperately to Xenserver, in the bootloader extlinux?. If there was a motherboard compatibility issue I would think it would also have manifested during installation, and the fact the problem seems to be with the booting into Xen makes me doubt this. Any ideas guys? (I'm using Xen because it can do PCI passthrough without VT-d.)

    Read the article

  • ubuntu 9.10 screen flickering problem on Thinkpad R31 with Intel 83830 Graphics

    - by PA
    I am trying to revitalize an old Thinkpad R31 that has the Intel 82830 graphics and only 256 MB of RAM. I have tried a Xubuntu 9.10 Live CD. After booting the screen blinks so much that it is practically unreadable. I have searched for updated IBM Thinkpad drivers but I only found drivers for Windows on the Thinkpad support web site. EDIT: I have changed the title and the description. It is not a problem of the drivers. It seems to be a problem with the kernel. See my own answer below.

    Read the article

  • Lots of mysql Sleep processes

    - by user259284
    Hello, I am still having trouble with my mysql server. It seems that since i optimize it, the tables were growing and now sometimes is very slow again. I have no idea of how to optimize more. mySQL server has 48GB of RAM and mysqld is using about 8, most of the tables are innoDB. Site has about 2000 users online. I also run explain on every query and every one of them is indexed. mySQL processes: http://www.pik.ba/mysqlStanje.php my.cnf: # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 10.100.27.30 # # * Fine Tuning # key_buffer = 64M key_buffer_size = 512M max_allowed_packet = 16M thread_stack = 128K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 1000 table_cache = 1000 join_buffer_size = 2M tmp_table_size = 2G max_heap_table_size = 2G innodb_buffer_pool_size = 3G innodb_additional_mem_pool_size = 128M innodb_log_file_size = 100M log-slow-queries = /var/log/mysql/slow.log sort_buffer_size = 5M net_buffer_length = 5M read_buffer_size = 2M read_rnd_buffer_size = 12M thread_concurrency = 10 ft_min_word_len = 3 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 512M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. #log = /var/log/mysql/mysql.log # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * BerkeleyDB # # Using BerkeleyDB is now discouraged as its support will cease in 5.1.12. skip-bdb # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # You might want to disable InnoDB to shrink the mysqld process by circa 100MB. #skip-innodb # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * NDB Cluster # # See /usr/share/doc/mysql-server-*/README.Debian for more information. # # The following configuration is read by the NDB Data Nodes (ndbd processes) # not from the NDB Management Nodes (ndb_mgmd processes). # # [MYSQL_CLUSTER] # ndb-connectstring=127.0.0.1 # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/

    Read the article

  • PC reboots automatically in the begining

    - by user233508
    I have a AMD Phenom II 3GHz. 2 GB RAM system running on Windows 7. Off late my PC does not start properly I have to start it at least 7-8 times before it starts. It starts and then shuts down. Every time the time for which the system is up increases. After 7-8 attempts it starts an works fine. I have to give it a min between restarts (USB mouse light goes off). If I try restarting before this time the PC does not start. I am suspecting humidity playing some factor as this issue has started creeping up ever since the rains have started.

    Read the article

  • Replicate / SYNC / Copy thousands of files

    - by rihatum
    Windows 32BIT Box (Server OS) 4GB RAM a 800GB LUN Mapped to the above box as a local drive Around 700GB of text files (Yes text files and a few thousand word documents) nested in thousands of directories. I need to move this to a new storage and map another server to it. What would be the best way to go about it ? What I did was mapped the existing LUN to our new box and mapped a LUN from the New storage to the new box too, and tried copying (windows copy) but that wasn't good / fast enough considering the downtime. I am now looking for either a script which will do this or a utility (prefer opensource / free) to move this size of data at a good speed. 2 x 1GB Nics teamed ether channel 2GBPs Any suggestions or pointers would be off great help Thanks !

    Read the article

  • Rails3 environment running very slow on Windows XP, Ubuntu 9.04, Ubuntu 9.10

    - by bergyman
    I've tried all three (granted the Ubuntu versions were via VirtualBox with XP as a host, but I gave the images all the available RAM my system has). Loading the rails environment is taking 30-60 seconds. rails console, rake test:units - anything that requires rails to load up. And not just on the first go - every time. I've even used autotest to see if it helps with execution time for unit tests, but it doesn't. Any time I change one test, it still takes 30 seconds to load them, and then about 4 seconds to execute. Has anyone else come across this issue? Has anyone figured out any way to fix this?

    Read the article

  • Computer shutsdowns when trying to boot

    - by Zexanima
    I have an IBM ThinkCentre, and I was talking to someone on Skype when it suddenly just shutoff. When I rebooted it asked me to start windows normally or in safe mode, but as soon I choose an option (Any of them) it shuts back down. So I thought it was a problem with windows and tired booting from a Hirens disk, but same thing. I've been using this computer without problems for over a year know. Any idea's for me to try? Unfortunatly I don't have any powersupplies or extra RAM to switch out to try anything like that. EDIT I left it off for a while and it's booting to windows now. I would still like to know what might have been causing it to do that if you have any ideas.

    Read the article

  • Acer Aspire ASE700-UQ660A will not respond to power button

    - by Tim R.
    This is something of a continuation of this question. I am now completely unable to boot this computer. The last time I used it, I used hibernation mode. When I needed to use it again, it would not respond at all to the power button, keyboard, or mouse. I tried: Holding down the power button for 15 seconds pressing the power button Unplugging the power cord for 30 seconds, plugging it back in, and trying again Removing the motherboard battery for over a minute and reinstalling it Before removing the motherboard battery, none of the lights on the front of the computer lit up. After reinstalling the battery and plugging the power cord back in, the light behind the power button is constantly illuminated (without even pressing the power button), but there is still no response to the power button, no fans turned on, nothing else that would indicate that it is running. System: Acer Aspire ASE700-UQ660A (Specs should be all factory defaults except:) 4 GB RAM Nvidia GeForce 8600 GT with driver version 197.45 Windows 7 Professional 64 bit

    Read the article

  • Slow performance by PHP directory operations on virtual machine (Ubuntu libvirt)

    - by thonixx
    Some days ago I installed an Ubuntu server and two running virtual machines with libvirt. Everything works fine except one performance problem. Everytime when I call a PHP script with directory operations the operations are very slow and not performant. Here is an example: http://zother.white-tiger.ch/ And here you see an example without a directory operation and how fast it is: http://michaeltanner.ch/ It's all on the same virtual server. The virtual machine uses 6 cores (8 are available) and 7500 megabytes RAM (8 Gigabyte are available). The disk image format is qcow2. How can I improve the performance?

    Read the article

  • Fast user switching is logging users off instead of switching users

    - by Nathan Osman
    I have a netbook running Windows 8.1 Pro that will no longer allow more than one user to be logged in at the same time. The steps necessary to reproduce this are as follows: The current user presses WIN to bring up the start screen. The user clicks his name in the corner and a list of other users appears. As soon as one of the other names is clicked, the user is unceremoniously logged off without any prompts. This behavior seems to have started some time after upgrading to Windows 8.1 from Windows 8. Before that point, everything worked fine and more than one user could be logged in at the same time. I've tried searching for others experiencing similar problems but this appears to be unique. System Details: CPU: Intel Atom N455 @ 1.66 GHz RAM: 1 GB OS: Windows 8.1 Pro w/ Media Center 32-bit

    Read the article

  • Patch Management and System Inventory on a Windows network?

    - by Scott
    What are some good ways to have patch management and systems/hardware inventory for a Windows (Server 2003 or 2008) network? For example, at a minimum knowing the basics for all the machines out on the network such as OS version, patch level, what hotfixes they have, processor, ram, etc. Even better would be knowing more details such as peripherals. Ideally if there were a way to push service packs, and hotfixes (and other software?) to the machines, that would be great. What are some options for this?

    Read the article

  • Dedicated server configuration - some tips -Xenserver/Debian

    - by Sanjay S
    I am migrating from a vps based hosting to a dedicated hosting (8GB RAM/1TB HD). I need to run multiple Drupal and Ruby based applications? what would be the recommended configuration. I was thinking of two options. 1) Install multiple Debian os on top of Xen (like VPS). Each may be 2GB Memory and run Drupal and Ruby and MYSQL on separate partitions . 2) Install one instance of Debian. and Install Drupal (Apache, php) Ruby (lighttpd, ruby) ,MySQL all in the same partition I was little worried that option 2 could lead to some performance issues later..

    Read the article

  • Dell R510 vs R710

    - by AX1
    Hello, the Dell R510 and R710 can both hold regular configurations (e.g. X5650, 24 GB RAM, etc.) and these usually come out to about the same price. Is there a particular reason why one would choose the R510 over the R710 or vice versa? There really appears a lack of differentiating factors. The only 'major' factor I found, which doesn't apply to me though, is that the R510 can hold up to 12 3.5in HDDs while the R710 (which is slightly more expensive) can only hold up to 6 3.5in HDDs. Maybe you guys have some input and bought either of these machines (or both) to shed some light on other differences and why someone should choose one over the other as the pricing is pretty much the same with my configuration. Thanks!

    Read the article

  • SQL Server 2008 Hardware Recommendation;

    - by Jay
    Hi,I work for a large fortune 500 company. We have several SQL 2005 Servers running on DELL Poweredge 2950 with 8 GB RAM and 4 CPU's. Storage is DMX RAID 10. We are in the process of migrating to sql 2008. We are planning on consolidating multiple sql 2005 into single SQL 2008 Server.If anyone can suggest hardware I would appreciate. We have looked at DELL R710, I was wondering if there are other servers that are good for running SQL 2008. Thanks

    Read the article

  • Setting up a Windows Server 2008 R2 DC + Fileserver : native or virtual?

    - by user126890
    I want to deploy a new DC + Fileserver using Windows Server 2008 R2 SP1 Standard Edition on a Dell PowerEdge R410 and iSCSI storage for a small business (~30 people). Should I install the system native on the server or use a virt layer? I don't have a budget for virtualization so i gotta go with something free... What's a better working routine, taking snapshots of vm's or taking backups (Acronis/CloneZilla) of systems? If I use a virt system, I need a GUI for some people in the business to reset the system to a earlier state in emergency situations. I wanted to install phpVirtualBox once but never finished, is it suitable in a productive environment? server specs: Intel Xeon E5620 CPU (2,40GHz, 4C, 12MB Cache) 8GB RAM Dual Rank LV RDIMMs 1333MHz 2x 1TB SATA 7,2K 3,5, RAID1

    Read the article

< Previous Page | 142 143 144 145 146 147 148 149 150 151 152 153  | Next Page >