Search Results

Search found 11524 results on 461 pages for 'insurance networking news'.

Page 147/461 | < Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154 | Next Page >

Exchange 2003: Fresh install, couple noob questions.

- by Eli

Hi All, Thanks for reading! I have a small network set up for a local office here, and have a fresh install of Exchange 2003 on our sole-server PDC. The network uses one domain, call it ourdomain.net, which is DNSed locally, but not DNSed for the actual domain, so ourdomain.net works from within the network, but from outside, it's just pointed to some domain parking. I have a completely different domain, call it emaildomain.com, which is currently setup for our website and email, which is hosted with a standard hosting company. We've been using a combination of Thunderbird and Outlook (with local .pst files) for email. I've been asked to setup Exchange to work with our email, but am not familiar with it. The install seems to have gone just fine. The question is: How do I get email from a domain outside our network to work with the exchange server? Do I need to move the email for that domain to point to our local server (I so hope not!), or can I just set exchange so somehow slurp mail from the existing mailboxes on our host for that domain's mail? Or are there better ideas I don't know to ask for? Any help very appreciated - thanks!

Read the article
DHCP settings out of range Internet shuts off after a few minutes

- by user263115

I recently upgraded from windows eight to windows 8.1 I do not know if this has anything to do with anything I have a 64 bit OS. My Internet goes off by itself every 5 minutes even though my wireless icon at the lower right of the screen still shows connected I had an error message in the last event in it said that might DHCP settings were out of range. I get my internet at my house through a wireless portable hotspot through my smart phone. But i haven't ever had any problems before and i only have this problem on this network. If i turn airplane mode on and reset my network card, the internet will come back to life but soon die. i don't experience this problem while on a different network or if i'm on WiFi. This s really annoying please help Windows IP Configuration Host Name . . . . . . . . . . . . : NastyMcnastyJr Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TeamViewer VPN Adapter Physical Address. . . . . . . . . : 00-FF-5D-13-26-21 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter Local Area Connection* 11: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter Physical Address. . . . . . . . . : F6-B7-E2-50-09-38 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter SAMMY McNASTY: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11n Network Adapter Physical Address. . . . . . . . . : F4-B7-E2-50-09-38 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::3107:66bc:cf1f:c776%4(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.43.3(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Friday, November 1, 2013 9:50:20 PM Lease Expires . . . . . . . . . . : Saturday, November 2, 2013 12:56:46 AM Default Gateway . . . . . . . . . : 192.168.43.1 DHCP Server . . . . . . . . . . . : 192.168.43.1 DHCPv6 IAID . . . . . . . . . . . : 83146722 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-F1-98-B4-20-89-84-84-61-BB DNS Servers . . . . . . . . . . . : 192.168.43.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Ethernet: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : 20-89-84-84-61-BB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Log Name: System Source: Microsoft-Windows-UserPnp Date: 10/26/2013 7:52:23 PM Event ID: 20003 Task Category: (7005) Level: Information Keywords: User: SYSTEM Computer: NastyMcnastyJr Description: Driver Management has concluded the process to add Service vwifibus for Device Instance ID PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 with the following status: 0. Event Xml: 20003 0 4 7005 0 0x8000000000000000 5118 System NastyMcnastyJr vwifibus \SystemRoot\system32\DRIVERS\vwifibus.sys PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 false true 0 Log Name: System Source: Microsoft-Windows-UserPnp Date: 10/19/2013 3:29:12 PM Event ID: 20001 Task Category: (7005) Level: Information Keywords: User: SYSTEM Computer: NastyMcnastyJr Description: Driver Management concluded the process to install driver netbc64.inf_amd64_0df63b5297d0f820\netbc64.inf for Device Instance ID PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 with the following status: 0x0. Event Xml: 20001 0 4 7005 0 0x8000000000000000 2015 System NastyMcnastyJr netbc64.inf_amd64_0df63b5297d0f820\netbc64.inf 6.30.223.102 Microsoft PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 {4D36E972-E325-11CE-BFC1-08002BE10318} false false false 0x0 Broadcom 802.11n Network Adapter Log Name: System Source: Microsoft-Windows-DNS-Client Date: 11/2/2013 12:24:59 AM Event ID: 1014 Task Category: (1014) Level: Warning Keywords: (268435456) User: NETWORK SERVICE Computer: NastyMcnastyJr Description: Name resolution for the name www.google.com timed out after none of the configured DNS servers responded. Event Xml: 1014 0 3 1014 0 0x4000000010000000 34771 System NastyMcnastyJr www.google.com 128 02000000C0A82B01000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

Read the article
Routing all Traffic through OpenVPN Tunnel

- by Filip Ekberg

I have installed OpenVPN server on Archlinux and am now using OpenVPN GUI on Windows 7, I can talk to other computers connected through the VPN but I have not yet figured out how to route all traffic through the tunnel. How do I do this? I figured I need to do it with route ( cmd command ) but I think i need some pointers here. I've followed the OpenVPN HowTo on the matter but that doesn't work, it simply doesn't push the "force the client to go through this gateway"-option. And changing from OpenVPN to a PPTP / IPSec alternative is not an option at the moment.

Read the article
Robocopy permission denied

- by Edoode

Robocopy is preinstalled with Windows 7. I've used it many times in the past. I tried to copy a folder to a remote share with robocopy c:\source "\\server\share\path" /s /r:2 /w:2` As a result I get permission denied. Using explorer I can copy files to this share. I've opened a command prompt with administrator permissions with the same result. The share is read/write for public. [EDIT] I've successfully mapped a driveletter to the share, but robocopy still fails EDIT I've added the /B switch without success. The exact error is: 2009/09/26 20:43:14 ERROR 5 (0x00000005) Accessing Destination Directory \drobo \Drobo\fotos__NEW\Ericsson\

Read the article
Wire VMWare Player NIC to a VLAN in Ubuntu 8.04.3

- by Sophie Charlesworth

Hi, I've got VMWare Player 2.5.x installed on a Ubuntu 8.04.3 host running CentOS 5.3 running Cobbler. VMWare Player has two NICs (I actually took this image from an ESXi image, converted it to Player 2.x image via VMWare Standalone Converter). I've also setup a vlan (vlan5) on the host with 10.0.0.x and I'd like Cobbler to use that VLAN to serve any incoming requests. How do I wire up my VMWare to use the VLAN I've setup? Just one of the NICs. What I'm trying to do is to offer a laptop with a VM that our sysadmins can go, plug it into a box (which does not connect to the interwebs) and install RHEL images via cobbler. So essentially, its a cross over cable from the network port on the lappy to the Dell server box. PXE boot in the dell box and install RHEL. I have the cobbler working fine under VMWare ESXi but not so on the VMWare Player because of the VLAN issue - I think. Any ideas?

Read the article
Keep getting invalid IP via WiFi

- by nmuntz

There is something wrong with my WiFi. I keep getting an invalid IP via DHCP (169.254.x.x), this happens for ALL wifi connections (home, office, etc). If I try a Local Ethernet connection via cable it works fine. I have tried downloading the latest drivers for my wireless adapter, resetting the TCP Stack and still have this issue. One strange thing I notice is under Device Manager, Network Adapters I have 4 "Unknown Devices" and three "Remote NDIS based Internet Sharing Device". My guess is that this belongs to McAfee. Not sure if this is related or not, anyways to try to fix this I tried downloading the NetLUIDfix.exe utility from McAfee but it didn't work. Any ideas how to solve this annoying issue? Thanks!!

Read the article
Windows 7 file sharing password protecting or making stuff available to just me

- by Carbonara

Even with the new Homegroup feature I'm still finding the way Windows deals with folder sharing utterly baffling. Here's what I want to do. I have two computers, a PC Desktop and a laptop. I also live in a shared flat with other computer users. I have set up a Homegroup and a Workgroup on the desktop and joined them on the laptop and in the home group I have shared video, music and pictures. This is so that anyone on the network can view pictures and listen to music etc. But I want my Documents folder from my desktop to only be available to me on my laptop and not to anyone else that may be on the network. The Homegroup only allows (from what I can gather from the baffling array of options) sharing with everyone or no one. Is it possible to only allow the laptop to access the documents folder on the desktop? The user name and password are the same on both computers.

Read the article
OpenVPN Bridge LAN-to-LAN Configuration?

- by Shad Reese

I'm trying to configure an OpenVPN bridge LAN-to-LAN setup. Currently, I have the OpenVPN bridge Server/Client setup up running. On the server-side my br-lan interface has tap0, eth0, and wlan0 in the bridge group. On the client-side the br-lan interface has eth0 and wlan0 in the bridge group, the client tap0 is outside of the br-lan group. Currently the two bridge groups are connected via the wlanO interfaces (server-side is the Access Point - AP and the client-side is the wireless client). My goal is to connect the two bridge groups with a wireless VPN pipe. My network configuration: Server: br-lan: 10.4.96.50 Client: br-lan: 10.4.96.75 tap0: 10.4.96.100 <---- issued by the VPN server. Unfortunately, I'm stuck with using a bridge instead of a routed OpenVPN setup. My question is how (if possible) do I add the client tap0 interface to the client bridge group, as to ensure all traffic between the server/client bridge groups is using the VPN pipe? SERVER CONFIG FILE. config openvpn sample_server # Set to 1 to enable this instance: option enable 1 option port 1194 option proto udp option dev tap0 option key /etc/easy-rsa/keys/server.key option dh /etc/easy-rsa/keys/dh1024.pem option ifconfig_pool_persist /tmp/ipp.txt option server_bridge "10.4.96.50 255.255.255.0 10.4.96.100 10.4.96.200" list push "redirect-gateway local def1" list push "dhcp-option DNS 10.4.96.14" option duplicate_cn 1 option comp_lzo 1 option max_clients 100 option log /tmp/openvpn.log option verb 3 CLIENT CONFIG FILE: config 'openvpn' 'sample_client' option 'enable' '1' option 'client' '1' option 'dev' 'tap' option 'proto' 'udp' list 'remote' '10.4.96.50 1194' option 'status' /tmp/openvpn-status.log option 'log' /tmp/openvpn.log option 'ca' '/etc/easy-rsa/keys/ca.crt' option 'cert' '/etc/easy-rsa/keys/client.crt' option 'key' '/etc/easy-rsa/keys/client.key' option 'comp_lzo' '1' option 'verb' '5' Thanks in advance,

Read the article
Wire VMWare Player NIC to a VLAN in Ubuntu 8.04.3

- by Sophie Charlesworth

I've got VMWare Player 2.5.x installed on a Ubuntu 8.04.3 host running CentOS 5.3 running Cobbler. VMWare Player has two NICs (I actually took this image from an ESXi image, converted it to Player 2.x image via VMWare Standalone Converter). I've also setup a vlan (vlan5) on the host with 10.0.0.x and I'd like Cobbler to use that VLAN to serve any incoming requests. How do I wire up my VMWare to use the VLAN I've setup? Just one of the NICs. What I'm trying to do is to offer a laptop with a VM that our sysadmins can go, plug it into a box (which does not connect to the interwebs) and install RHEL images via cobbler. So essentially, its a cross over cable from the network port on the lappy to the Dell server box. PXE boot in the dell box and install RHEL. I have the cobbler working fine under VMWare ESXi but not so on the VMWare Player because of the VLAN issue - I think. Any ideas?

Read the article
Setting up Lan within a Lan

- by nageeb

How unreasonable would it be to setup a small LAN within an existing LAN? I'm setting up a series of video surveillance servers and a number of IP cameras in a client's location and cannot have my equipment on the same network as their local machines. My network is essentially self-contained and the only device that anyone needs to access is a web-app on one of the machines. Basically I'm thinking of installing a SOHO router which would uplink to their LAN, and then set up some NAT rules on both their router and my router, to allow outside access to the webserver. Is there anything fundamental that i'm missing which would prevent this from working?

Read the article
Resetting TCP/IP Settings on Windows 8

- by cpx

Apparently, there's a command: netsh int ip reset which is known to reset TCP/IP settings for Windows XP/Vista/7 and I'm not sure how it works correctly on Windows 8. When I typed the command under command prompt (Admin) I got two errors as pointed out in the screenshot: Resetting , failed. Access is denied. At the end it said Resetting , OK! So, how do I confirm if it worked or not?

Read the article
Can ping IP address and nslookup hostname but cannot ping hostname

- by Puddingfox

I have a DNS server set up on one of my machines using BIND 9.7 Everything works fine with it. On my Windows 7 desktop, I have statically-assigned all network values. I have one DNS server set -- my DNS server. On my desktop, I can ping a third machine by IP fine. I can nslookup the hostname of the third machine fine. When I ping the hostname, it says it cannot find the host. / C:\Users\James>nslookup icecream Server: cake.my.domain Address: xxx.xxx.6.3 Name: icecream.my.domain Address: xxx.xxx.6.9 C:\Users\James>ping xxx.xxx.6.9 Pinging xxx.xxx.6.9 with 32 bytes of data: Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Ping statistics for xxx.xxx.6.9: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\Users\James>ping icecream Ping request could not find host icecream. Please check the name and try again. I have also specified the search domain as my.domain xxx.xxx and my.domain substituted for security Why can I not ping by hostname? I also can not ping using the FQDN. The problem is that this problem is shared by all applications that resolve hostnames. I cannot use PuTTY to SSH to my machines by hostname; only by IP

Read the article
configuring two network interfaces in ubuntu 10.04.1

- by Bill Smith

I have got two NICs configured on a VM - each is tied to a specific network, one is a DMZ, the other is an internal network. I want MySQL to listen on the internal network only and Apache on the DMZ listening for HTTP and HTTPS. But as soon as I add the second interface I run into trouble. I can hit HTTP on either interface, but can not hit 3306 on the internal network for MySQL. Here's the config... could someone sanity check this please? auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.153.24.230 netmask 255.255.255.240 network 10.153.24.224 broadcast 10.153.24.239 dns-nameservers 8.8.8.8 auto eth1 iface eth1 inet static address 10.153.24.195 netmask 255.255.255.224 gateway 10.153.24.193 broadcast 10.153.23.223

Read the article
Problems linking to social networks in Windows 8

- by Andrew Cooper

I've upgraded my laptop to Windows 8 (from Windows 7) and I'm having problems with getting information to show in the People and Messaging apps. I've linked my Facebook, Twitter and LinkedIn accounts to my Live Id, and on Windows 7 I was able to see my Friends' facebook activity in Windows Live Messenger. In the Windows 8 People app I can see all my contacts from Facebook, Twitter and LinkedIn, and I can see the on-line status of at least my Facebook contacts. I can also see the profiles details of each contact, but I don't get anything in the "What's New" view. The Messaging app is just blank. I assume I should be able to send messages to my contacts, but I can't see any way to do it. Am I missing something?

Read the article
5.5.0 smtp;554 transaction failed spam message not queued

- by Miguel

Some users are trying to send email to certain domains using Exchange Server 2003, but the message is always is rejected and the following message is shown: 5.5.0 smtp;554 Transaction Failed Spam Message not queued The IP is not in a black list (checked using http://whatismyipaddress.com/blacklist-check and is clean - not listed). The emails were checked using using smtpdiag ("a troubleshooting tool designed to work directly on a Windows server with IIS/SMTP service enabled or with Exchange Server installed") and the connection using port 25 is ok. Also, an nslookup with set type=ptr shows (names and IP changed, "" means I typed something): C:\Documents and Settings\administrator>nslookup Default Server: publicdns.isp.net Address: 10.10.10.10 > server publicdns.isp.net Default Server: publicdns.isp.net Address: 10.10.10.10 > set type=ptr >mydomain.com Server: publicdns.isp.net Address: 10.10.10.10 mydomain.com primary name server = publicdns.isp.net responsible mail addr = root.isp.net serial = 2011061301 refresh = 10800 (3 hours) retry = 3600 (1 hour) expire = 604800 (7 days) default TTL = 86400 (1 day) > 20.21.22.23 Server: publicdns.isp.net Address: 10.10.10.10 23.22.21.20.in-addr.arpa name = mail.mydomain.com 20.21.in-addr.arpa nameserver = publicdns.isp.net 20.21.in-addr.arpa nameserver = publicdns2.isp.net publicdns2.isp.net internet address = 10.10.10.11 publicdns.isp.net internet address = 10.10.10.10 Server: publicdns.isp.net Address: 10.10.10.10 23.22.21.20.in-addr.arpa name = mail.mydomain.com 20.21.in-addr.arpa nameserver = publicdns.isp.net 20.21.in-addr.arpa nameserver = publicdns2.isp.net publicdns2.isp.net internet address = 10.10.10.11 publicdns.isp.net internet address = 10.10.10.10 > set type=mx > mydomain.com Server: publicdns.isp.net Address: 10.10.10.10 mydomain.com MX preference = 10, mail exchanger = mail.mydomain.com mydomain.com nameserver = publicdns.isp.net mydomain.com nameserver = publicdns2.isp.net mail.mydomain.com internet address = 20.21.22.23 publicdns2.isp.net internet address = 10.10.10.11 publicdns.isp.net internet address = 10.10.10.10 > set type=a > mydomain.com Server: publicdns.isp.net Address: 10.10.10.10 Nombre: mydomain.com Address: 20.21.22.23 When I test the spf record with http://www.mxtoolbox.com it shows: TXT mydomain.com 24 hrs v=spf1 a mx ptr ip4:20.21.22.23 mx:mail.mydomain.com -all Any clues of what's happening here?

Read the article
Wifi as LAN - Is it possible ? How ?

- by sagar

Hello ! Every one. I am having a query regarding WiFi network. I am having PC & LapTop. Now, Let me explain the situation. I requested My WiFi providers that I want connection in my PC. So that - WiFi provider set up an Antenna on my building Terrace - They joined a cable to pc & that Antenna. ( I think using RJ45 connector ) - The reason behind this - my pc is not having inbuilt wifi functionality. Now - almost laptops have inbuilt functionality. Now - On terrace there is wifi with superb speed. But on my flat - wifi comes with low speed. so, when ever I use internet on my pc - it has great speed - but my laptop works with low speed. The reason behind this - PC is catching wifi from terrace & laptop is catching the wifi from it's own place. Now, My question is something like this. Can we place an antenna or something like that & connect it to laptop for better wifi speed? ( I am not technical person - Please add comment for down vote - if any ) ( Please add comment for more explanation of my Problem ) Thanks in advance for sharing your knowledge. Sagar

Read the article
XenServer 5.6.1-fp1. Can't get network working

- by bakytn

I have a PC where XenServer 5.6.1 fp-1 has been successfully installed. I've manually set the network settings: 192.168.1.50 255.255.255.0 192.168.1.1 but it's set to xenbr0 iface. While eth0 is empty. When I click on "Configure Management Inteface" it shows that eth0 is connected. But when I ping a default gateway (which is 100% should be accessible) it fails. I used to another shell (Alt+F3) and logged as root. I also failed to ping. with both: ping -I eth0 192.168.1.1 and ping -I xenbr0 192.168.1.1 Be assured that: Cable works Ethernet adapter is 100% functional (prev OS was Ubuntu it was working) There is no firewall rule to deny anything. (everything is allowed)

Read the article
XP, how to apply security to files, now have simple file sharing and can't access some files from other machines ?

- by Jules

For a month or two now I've been using simple file sharing, for several months before that I didn't, then before that I had simple file sharing tuned on. So at the moment I don't have a security tab (on files or folders) or sharing permissions settings there too. As an example, from another machine, I can access files from 2007 but not from the summer of last year in the same folder. I can access all files on that local machine. So I think I just need to re-apply security or permissions somehow? What should I do?

Read the article
Finding cause of TCP retransmission within a LAN

- by Surreal

Hello denizens of Server Fault I have an irritating problem with a LAN of about 100 computers, 2 Windows domain servers, and 12 VoIP phones. Since their installation around a year ago, every week or so, we notice a VoIP phone resetting itself - occasionally in the middle of a call. Simultaneously there are often signs of temporary loss of connection on computers: freezes in explorer while accessing network shares, errors in our administration software due to loss of connection to the database server. I have been doing some Wireshark monitoring on the connection between the VoIP PBX and the rest of the network. Wireshark picks up a clump of retransmitted TCP packets at the times when we record phone restarts. The Wireshark log shows about 2 clusters of retransmissions a day ranging from 5 packets to hundreds. Those in each cluster are mainly between the PBX and some set of the VoIP phones, but not always the same set. Often retransmissions at the same time are to phones connected to the same switch, but sometimes retransmissions occur together to phones at opposite ends of the network. There are usually some coincident retransmissions in passing TCP traffic, for example between client machines and the file servers. The spikes in retransmissions and phone resets do not correlate well with when the network is heavily loaded. They seem to occur slightly more during the day, but most in the evening, when traffic should be decreasing. They occur reasonably often late at night when most computers are turned off and traffic should be lowest. Do you have any ideas that might help diagnose the cause of problems like this? One thing I have not yet tried, but should have, is updating the firmware of all the switches.

Read the article
Linux DNS Multi tenant

- by spicyramen

I need to setup a multi-tenant DNS solution in Linux DNS Server. Currently I serve multiple companies: Company ABC, Company XYZ, etc... I need to create a) Forwarder zone b) Reverse Forward Zone. I can easily create a Forward Zone with domain abc.com The challenge I have is that each of my customer components share the same IP address. Hence If I create the Reverse Forward Zone I end up with something like this: abc.com 1.1.1.1 host.abc.com xyz.com 1.1.1.1 host.xyz.com If I perform a reverse lookup on host.abc.com it works fine...but if I do a reverse lookup on 1.1.1.1 I get a load balance response of: attempt: host.abc.com attempt: host.xyz.com attempt: host.abc.com Any ideas? I want to add logic to the DNS configuration to handle DNS reverse lookup based on source machine and respond with right hostname. Workaround: Create multiple DNS but this is not scalable.

Read the article
Cisco ASA intermittently fails to see traffic

- by DrStalker

users | Mikrotik -- Internet | ASA | ServerA and ServerB I'm trying to troubleshoot a problem with a new Cisco ASA 5505. The network design is as above - the Microtik is the existing router, ServerA and ServerB used to plug directly into it. ServerA has IP 10.30.1.10, ServerB has IP 10.30.1.11 The ASA is configured with no NAT, a "allow anything" firewall, and uses the microtik as its default gateway. In effect, it is currently a simple IP router; the firewall and VPN stuff will all come later once the basics are working. Th problem is access to ServerA and ServerB is erratic - sometimes it will work, sometimes it will fail. It can fail for either one of the servers only, or both. When it is working: The Mikrotik logs show ping packets being sent out over the proper interface The ASA logs show the incoming connections. When it is failing: The Mikrotik logs show ping packets being sent out over the proper interface The ASA logs show nothing reaching the ASA. This can fail for one server only (e.g.: the Mikrotik is putting out packets to 10.30.1.10 and 10.30.1.11, but the ASA is only seeing packets arrive destined for 10.30.1.11) It can fail for one source only (e.g.: ClientA on the users network can ping 10.30.1.11, but clientB cannot) The problem can also be seen from the mikrotik router itself; sometimes it can ping ServerA and ServerB, sometimes it can only ping one of them What could be causing this? I can't think of any possible cause that is intermittent and could explain why the problem may occur for one destination server and not others. edit: Link to ASA config

Read the article
Software to consolidate contacts from multiple sources?

- by Neil

I'm looking for an app that can take my contacts from Gmail, Facebook, and my mobile phone, to come up with one consolidated address book that, for each contact, contains the name, email address, facebook username, and mobile number, and if possible, export this data to the Mac Address Book. Is there any app that can do this? Online or offline will do. Currently, I've been only able to find apps that need to be hosted on my own server, such as the ones below. Isn't there any standalone desktop or web app? knowee[dot]net/ noserub[dot]com/ diso-project[dot]org/

Read the article
How to stop intermittent playback on airtunes (iTunes + Airport Express)?

- by Alex B

Is there a definitive answer for how to stop intermittent "skips" or pauses while playing music from iTunes to an airport express connected to my home stereo? When I read other forums I see a wealth of posts that say "I did XYZ and it's fixed" followed by "I tried XYZ and it didn't work." This does not appear to be signal strength related. The green light on the Airport Express does not turn to yellow/orange. Other wireless devices have no trouble connecting at the same or greater distances from the wireless router.

Read the article
IPv6 address is not working in Ubuntu

- by Alex Farber

Telnet connection with echo service succeeds for localhost and 127.0.0.1 host names, but fails with ::1 host name: alex@u120432:~$ telnet localhost 7 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 123 123 ^] telnet q Connection closed. alex@u120432:~$ telnet ::1 7 Trying ::1... telnet: Unable to connect to remote host: Connection refused alex@u120432:~$ My own program trying to talk using IPv6 address fails as well. Why IPv6 address is rejected? OS: Ubuntu 12.04 32 bit.

Read the article
How to copy lots of files between two computers, without network?

- by Steve Bennett

I want to copy around 50Gb of files from my desktop to my work laptop. For some reason, the laptop won't connect to my home network. I haven't had any luck with a direct ethernet connection either, and I'm not willing to change any of the laptop's network configuration (last time I did that, I couldn't get onto the network at work, making me Not Very Popular). So...what else is there? The obvious route is copying via SD card. My largest card is 8Gb. But I can't find a good workflow. Is there a tool designed for this, where I could just repetitively move the card back and forth, without having to select files? I've tried using teracopy, but you end up missing a few files. I guess I could zip everything up into multi-volume .rars or something...but is there a more elegant way?

Read the article

< Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154 | Next Page >