resource leak - Page 147

In Varnish stats, what does "Backend conn. reuses" and "recycles" mean?

- by electblake

I have varnish installed and I think it's working properly (not sure if it matters but I am using iptables reroute method to route ports incoming:80 > varnish:8080 > apache:80 Anyway, In varnishstat I see a pretty high Hitrate average (60-80%) which I am working on but I am unclear at what all of the stats presented by varnishstat Specifically the following Backend stats: 380 0.00 0.26 Backend conn. success 10122 15.00 6.85 Backend conn. reuses 267 0.00 0.18 Backend conn. was closed 10391 15.00 7.04 Backend conn. recycles I've read a blog post called "Varnishstat for dummies" which outlines a lot of details of varnishstat (I recommend it for beginners) but it does not go over these Backend stats. Feel free to explain here or link to a resource I've missed :) thanks!

Read the article

Weak event handler model for use with lambdas

- by Benjol

OK, so this is more of an answer than a question, but after asking this question, and pulling together the various bits from Dustin Campbell, Egor, and also one last tip from the 'IObservable/Rx/Reactive framework', I think I've worked out a workable solution for this particular problem. It may be completely superseded by IObservable/Rx/Reactive framework, but only experience will show that. I've deliberately created a new question, to give me space to explain how I got to this solution, as it may not be immediately obvious. There are many related questions, most telling you you can't use inline lambdas if you want to be able to detach them later: Weak events in .Net? Unhooking events with lambdas in C# Can using lambdas as event handlers cause a memory leak? How to unsubscribe from an event which uses a lambda expression? Unsubscribe anonymous method in C# And it is true that if YOU want to be able to detach them later, you need to keep a reference to your lambda. However, if you just want the event handler to detach itself when your subscriber falls out of scope, this answer is for you.

Read the article

Force full garbage collection when memory occupation goes beyond a certain threshold

- by Silvio Donnini

I have a server application that, in rare occasions, can allocate large chunks of memory. It's not a memory leak, as these chunks can be claimed back by the garbage collector by executing a full garbage collection. Normal garbage collection frees amounts of memory that are too small: it is not adequate in this context. The garbage collector executes these full GCs when it deems appropriate, namely when the memory footprint of the application nears the allotted maximum specified with -Xmx. That would be ok, if it wasn't for the fact that these problematic memory allocations come in bursts, and can cause OutOfMemoryErrors due to the fact that the jvm is not able to perform a GC quickly enough to free the required memory. If I manually call System.gc() beforehand, I can prevent this situation. Anyway, I'd prefer not having to monitor my jvm's memory allocation myself (or insert memory management into my application's logic); it would be nice if there was a way to run the virtual machine with a memory threshold, over which full GCs would be executed automatically, in order to release very early the memory I'm going to need. Long story short: I need a way (a command line option?) to configure the jvm in order to release early a good amount of memory (i.e. perform a full GC) when memory occupation reaches a certain threshold, I don't care if this slows my application down every once in a while. All I've found till now are ways to modify the size of the generations, but that's not what I need (at least not directly). I'd appreciate your suggestions, Silvio P.S. I'm working on a way to avoid large allocations, but it could require a long time and meanwhile my app needs a little stability

Read the article

Mysql table Crashed during Optimize, table repair taking too long

- by hellohellosharp

One of my vital tables was being optimzied and MySQL crashed in the middle of it. It then said the table was corrupt. I am running repair but it is taking over an hour, I need this table up ASAP (I will even truncate it if necessary). Please help me get this solved. The table has about 54 million rows. This is a MyISAM. Any additional information needed, just ask. Here are the contents of my my.cnf: [mysqld] max_connections = 850 max_user_connections = 850 query_cache_size = 128M skip-external-locking key_buffer_size = 64M max_allowed_packet = 8M table_open_cache = 256 sort_buffer_size = 4M net_buffer_length = 16K read_buffer_size = 1M read_rnd_buffer_size = 1M myisam_sort_buffer_size = 32M innodb_file_per_table tmp_table_size = 100M max_heap_table_size = 64M thread_cache_size = 8 wait_timeout=25 interactive_timeout=25 table_cache=600 innodb_buffer_pool_size = 4G innodb_thread_concurrency = 8 innodb_flush_method = O_DIRECT # This setting allows the use of asynchronous I/O in InnoDB. # The following files track usage of this resource: # - /proc/sys/fs/aio-max-nr # - /proc/sys/fs/aio-nr # Default limit is 65536, of which a single instance of mysql uses 2661 out of the box innodb_use_native_aio = 1

Read the article

Where my memory is alloced, Stack or Heap, Can I find it at Run-time?

- by AKN

I know that memory alloced using new, gets its space in heap, and so we need to delete it before program ends, to avoid memory leak. Let's look at this program... Case 1: char *MyData = new char[20]; _tcscpy(MyData,"Value"); . . . delete[] MyData; MyData = NULL; Case 2: char *MyData = new char[20]; MyData = "Value"; . . . delete[] MyData; MyData = NULL; In case 2, instead of allocating value to the heap memory, it is pointing to a string literal. Now when we do a delete it would crash, AS EXPECTED, since it is not trying to delete a heap memory. Is there a way to know where the pointer is pointing to heap or stack? By this the programmer Will not try to delete any stack memory He can investigate why does this ponter, that was pointing to a heap memory initially, is made to refer local literals? What happened to the heap memory in the middle? Is it being made to point by another pointer and delete elsewhere and all that?

Read the article

Reduce the I/O priority of Windows Backup (Windows Server 2008 R2)

- by HelloSam

I have a PostgreSQL running on Windows Server 2008 R2 x64 box. And I have scheduled a backup everyday from the RAID 1 DB disk to a dedicated standalone disk. They are SAS 15k on Dell PERC 6i. I am using the built-in Windows Server Backup for purpose. The problem is, whenever the backup process is kicked in, the database performance is hogged. I would say almost a 10x of performance reduction. From the resource monitor, the disk queue is in the double digit range when backing up, and less than 1 during the day. The disk activity is like ~30-50MB/s during backup, so I guess the hardware is acting normally, though wbengine.exe takes up most of the portions. I think reduce the IO priority of the backup process would be an answer, but I couldn't find a way to. Tuning process CPU priority does not seems to help.

Read the article

Set up Glassfish connection pool to talk to a database on a Ubuntu VPS

- by Harry Pham

On my Ubuntu VPS, i have a mysql server running and a Glassfish 3.0.1 Application Server running. And I am having a hard to have my GF successfully ping the database. Here is my GF set up Assume: x.y.z.t is the ip of my VPS Resource Type: javax.sql.ConnectionPoolDataSource User: root DatabaseName: scholar Url: jdbc:mysql://x.y.z.t:3306/scholar URL: jdbc:mysql://x.y.z.t:3306/scholar Password: xxxx PortNumber: 3306 ServerName: x.y.z.t Inside my glassfish3/glassfish/lib, I have my mysql-connector-java-5.1.13-bin.jar Inside the database, table mysql here is the result of the query select User, Host from user; +------------------+-----------+ | User | Host | +------------------+-----------+ | root | 127.0.0.1 | | debian-sys-maint | localhost | | root | localhost | | root | yunaeyes | +------------------+-----------+ Now from my machine, if I try to connect to this db via mysql browser (mysql client software), well I cant. Well from the table above, seem like it only allow localhost to connect to this db. Keep in mind that both my db and my GF are on the same VPS. Please help

Read the article

Break on EXC_BAD_ACCESS in XCode?

- by jasonh

I'm new to iPhone development and XCode in general and have no idea how to begin troubleshooting an EXC_BAD_ACCESS signal. How can I get XCode to break at the exact line that is causing the error? I can't seem to get XCode to stop on the line causing the problem, but I do see the following lines in my debug console: Sun Oct 25 15:12:14 jasonsmacbook TestProject[1289] : CGContextSetStrokeColorWithColor: invalid context Sun Oct 25 15:12:14 jasonsmacbook TestProject[1289] : CGContextSetLineWidth: invalid context Sun Oct 25 15:12:14 jasonsmacbook TestProject[1289] : CGContextAddPath: invalid context Sun Oct 25 15:12:14 jasonsmacbook TestProject[1289] : CGContextDrawPath: invalid context 2009-10-25 15:12:14.680 LanderTest[1289:207] *** -[CFArray objectAtIndex:]: message sent to deallocated instance 0x3c4e610 Now, I am attempting to draw to the context I retrieve from UIGraphicsGetCurrentContext() and pass to the object that I want to draw with. Further trial and error debugging and I found that an NSMutableArray I have a property for on my class was a zombie. I went into the init function for the class and here's the code I was using: if ((self = [super init])) { NSMutableArray *array = [NSMutableArray array]; self.terrainBlocks = array; [array release]; } return self; } I removed the [array release] line and it no longer gives me the EXC_BAD_ACCESS signal, but I'm now confused about why this works. I thought that when I used the property, it automatically retained it for me, and thus I should release it from within init so that I don't have a leak. I'm thoroughly confused about how this works and all the guides and Stackoverflow questions I've read only confuse me more about how to set properties within my init method. There seems to be no consensus as to which way is the best.

Read the article

Bootstrapping in CloudFormation with Autoscale

- by PapelPincel

My CloudFormation template creates an autoscale group and bootstrap it with utility script /opt/aws/bin/cfn-init. When I remove the bootstrap part out of my template the, autoscale get created without any problem, but I add it the CloudFormation Stack fails and add line in /var/log/cloud-init.log : Error: AutoScalingGroupName does not specify any metadata The line above appens right after the following command : /opt/aws/bin/cfn-init --verbose --configsets orderedConfig --region us-east-1 --stack AS15 --resource AutoScalingGroupName --access-key XXXXXXXXXXXXX --secret-key XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Digging a little bit deeper, in cfn-init I added the following lines the point where it exit: from pprint import pprint pprint(vars(detail)) and I get the following trace when running the previous cfn-init command : {'_description': None, '_lastUpdated': datetime.datetime(2012, 7, 12, 14, 52, 42), '_logicalResourceId': u'AutoScalingGroupName', '_metadata': None, '_physicalResourceId': u'AS15-AutoScalingGroupName-HNPOXXXXXXXX', '_resourceStatus': u'CREATE_COMPLETE', '_resourceStatusReason': None, '_resourceType': u'AWS::AutoScaling::AutoScalingGroup', '_stackId': u'arn:aws:cloudformation:us-east-1:XXXXXXXXXXXXX:stack/AS15/XXXXXXXX-cc30-11e1-XXXXXX-XXXXXXXXXX', '_stackName': u'AS15'} As you can see, the metadata field is empty and that's the reason why it fails to create the stack. Is there any known side effects for cfn-init when used with autoscale ?

Read the article

Using Word COM objects in .NET, InlineShapes not copied from template to document

- by Keith

Using .NET and the Word Interop I am programmatically creating a new Word doc from a template (.dot) file. There are a few ways to do this but I've chosen to use the AttachedTemplate property, as such: Dim oWord As New Word.Application() oWord.Visible = False Dim oDocuments As Word.Documents = oWord.Documents Dim oDoc As Word.Document = oDocuments.Add() oDoc.AttachedTemplate = sTemplatePath oDoc.UpdateStyles() (I'm choosing the AttachedTemplate means of doing this over the Documents.Add() method because of a memory leak issue I discovered when using Documents.Add() to open from templates.) This works fine EXCEPT when there is an image (represented as an InlineShape) in the template footer. In that case the image does not appear in the resulting document. Specifically the image should appear in the oDoc.Sections.Item(1).Footers.Item(WdHeaderFooterIndex.wdHeaderFooterPrimary).Range.InlineShapes collection but it does not. This is not a problem when using Documents.Add(), however as I said that method is not an option for me. Is there an extra step I have to take to get the images from the template? I already discovered that when using AttachedTemplate I have to explicitly call UpdateStyles() (as you can see in my code snippet) to apply the template styles to the document, whereas that is done automatically when using Documents.Add(). Or maybe there's some crazy workaround? Your help is much appreciated! :)

Read the article

Reimage PC: Myth or Fact to speeding up a slow PC?

- by sunpech

I have a 4-5 year old PC running Windows XP for software development at work. It struggles to run all development tools I need at the same time. Management feels I need to reimage my computer to "speed it up". The last time it was imaged was about 3 years ago. What resources books, websites, blogs, articles, etc are out there that supports/debunks this well known belief that reimaging an old PC running Windows XP will make it faster once again? A resource I remember reading is from Lifehacker.com: Windows Maintenance Tips: The Good, Bad And Useless

Read the article

Eclipse Pydev Ctrl-Click (Go to Definition) Doesn't Work OSX

- by Koobz

My Pydev set up in OS X is kind of busted. I'm working on a Django project and I find that Ctrl-Click never actually goes to the definitions of any of my objects or functions. I actually have a symlink to Django/django in my workspace so that it's easier to cross reference Django code. My guess is that something is wrong with the builder, but it doesn't throw up any errors. Does anyone have advice here? Different topic: does anyone know of a good way to use Ctrl-Shift-R (Open resource) and filter files by folder? It's not that useful in python projects where you have 20 urls.py showing up.

Read the article

Assigning resources to MS Project 2007

- by adam

Hi, I'm planning a redesign of a site in Project 2007. I have three developers to hand, all with the same skills. There are about 80 templates to be rendered as part of the redesign, and each template has been added as a project task. Each of these tasks can be done by any of the 3 devs, and each will take a day (with a few exceptions). There is no order in which the tasks must be completed, so there are no predecessor rules. I'd like to be able to assign tasks to a 'Developer' resource group, and for Project to see that three tasks can be done at once (as the group has three resources members) and queue the tasks as such. Googling leads me to Team Assignment, but that appears to be part of Project Server. Surely I can do this in standalone Project? Thanks, Adam

Read the article

Migrating XenServer VMs from Intel to AMD servers

- by John Smith

I need to replace my XenServer 6.1 resource pool hardware. I currently run Intel hardware and I have to move to AMD hardware (corporate politics and budget stuff, blah blah blah). I have downtime available so I can use cold migration - live migration is not required. I will also have the new hardware (AMD) alongside the old hardware (Intel). The XenServer docs say there may be problems exporting from one arch and importing to another "may not work" - http://docs.vmd.citrix.com/XenServer/6.1.0/1.0/en_gb/guest.html#importing_vms - but mentions nothing about simply turning off the VM on one arch and then powering it back on new arch. VMs are a mix of OS - some Windows, some Linux, multiple versions. Is this something that can be done with no problems, or are there problems I need to be aware of?

Read the article

Is there a security risk for allowing people to set their DNS so their own subdomains can be route to my server?

- by DantheMan

Lets say that I have a web application, built in Django and deployed with Nginx. Is it a good idea to offer a service that allows customers to request that a subdomain can be pointed at it. I figured this: If I dont allow this, then some companies wont want to access the service from http://mydjangoappmadeupname.com/bigcorporation/ They would rather access it through http://service.bigcorporation.com That would effectively mask that they are using an outside resource. Is there a significant risk that I am overlooking? Also do you think it would be easier to just set things up in Django to handle it, allowing Nginx to accept all domains and then pushing them to Django which would filter out if they are allowed or not, or would it be better to just update my Nginx log each time a client wanted this changed?

Read the article

Does upgrading RAM causes increase in Graphic card's share?

- by A.S.

I have asked this question on Ask Ubuntu, and I was suggested to Upgrade RAM from most voted answers. But I got a point about my graphics card. Since, I can upgrade RAM and not graphics card, Does upgrading RAM also cause graphics memory to increase. To clear the point: My specs are given below: Laptop : Lenovo 3000 Y410. (bought in 2008 October) RAM: 1 GB (DDR2) External Graphics (Dedicated): N/A Internal Graphics (Shared): 256 MB Graphics Chipset: Intel GMA X3100 My Question is: If I increase my RAM to 3 GB, will it increase graphics cards share of the Memory. In other word, If graphics card shares 256 MB in 1GB RAM, will it share more, when I upgrade the RAM into 2GB or more ? Authentic resource link will be much appreciated I have recently known that, My chipset GMA X3100 can address 384 MB of RAM. So the question.

Read the article

How to avoid Memory "Hard Fault/sec"

- by Flavio Oliveira

i've a problem on my windows 2008 server x64, and i cannot understand how can i solve it. i'm looking to Resource Monitor and see about 100 to 200 hard faults/sec. and generally the machine is slow. As i've readed a bit it is caused by a "memory Page" that is no longer available on physical memory and causes a io operations (disk) and it is a problem. The current hardware is a intel core2duo E8400 (3.0GHz) with 6GB RAM on a Windows Server Web 64-bit. Actually the machine have about 2GB Ram used what having 4Gb available to use, Why is the machine requires that high level of Disk operations? what can i do to increase the performance? Im experiencing a memory issues? what should be my starting point?

Read the article

Java Collections and Garbage Collector

- by Anth0

A little question regarding performance in a Java web app. Let's assume I have a List<Rubrique> listRubriques with ten Rubrique objects. A Rubrique contains one list of products (List<product> listProducts) and one list of clients (List<Client> listClients). What exactly happens in memory if I do this: listRubriques.clear(); listRubriques = null; My point of view would be that, since listRubriques is empty, all my objects previously referenced by this list (including listProducts and listClients) will be garbage collected pretty soon. But since Collection in Java are a little bit tricky and since I have quite performance issues with my app i'm asking the question :) edit : let's assume now that my Client object contains a List<Client>. Therefore, I have kind of a circular reference between my objects. What would happen then if my listRubrique is set to null? This time, my point of view would be that my Client objects will become "unreachable" and might create a memory leak?

Read the article

Unable to use Gmail in Thunderbird 3

- by Jatin Ganhotra

Mozilla Thunderbird v.3.1.7 I am trying to setup Gmail, but none of the settings are working. I have tried every resource: Blogs, tutorials Instructions by Google Instructions by Thunderbird Questions here But, still its not working. My settings are as follows Server Settings Server Type: IMAP Mail server Server Name: imap.gmail.com Username: [email protected] Port: 993 Default: 993 Connection Security: SSL/TLS Authentication method: Encrypted password Outgoing server (SMTP) Server Name: smtp.gmail.com Port: 587 Default: 25 Connection Security: STARTTLS Authentication method: Encrypted password Username: [email protected] IMAP is enabled in my Gmail settings. ERROR: Connection to the server [email protected] timed out. I am behind a proxy server and I have configured those settings under: Thunderbird Preferences - Advanced - Network and Disk Space - Connection Settings - Manual Proxy Configuration The proxy configuration works, as when I created a Blogs and News feeds a/c, it was working properly and fetching the feeds for me. So, Thunderbird is configured properly as per the proxy settings. Help me.

Read the article

Two different sites, same IP, same top-level domain, on IIS 7.5 -- one works and the other displays HTTP 404 error

- by user717236

I'm running a Windows 2008 R2 box with IIS 7.5 as the web server. On IIS, I have two websites: mysubsite1.mysite.com and mysubsite2.mysite.com. There is only one IP on the server and both sites share this IP. Here is how I have the bindings configured: mysubsite1.mysite.com works fine. However, mysubsite2.mysite.com gives me the following error: Not Found HTTP Error 404. The requested resource is not found. Now, if I change the Host name field for mysubsite1.mysite.com to blank and restart the web server, both sites work! The question is why is the host name field for the first site causing an HTTP 404 error for the second site when both sites' Host name fields are filled? I would appreciate any insight. Thank you.

Read the article

Need help configurating my Tomcat server without any WAR files

- by gablin

I just reinstalled my entire server, and now I can't seem to get my JSP-based website to work on Tomcat anymore. I use the same server.xml file, which worked perfectly before the reinstallation, but no longer. Here's the content of the server.xml file which worked before:  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />  <Listener className="org.apache.catalina.core.JasperListener" />  <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />  <GlobalNamingResources>  <Resource name="UserDatabase" auth="Container" type="org.apache.catalina.UserDatabase" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" pathname="conf/tomcat-users.xml" /> </GlobalNamingResources>  <Service name="Catalina">    <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" />      <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />   <Engine name="Catalina" defaultHost="localhost">      <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>        <Host name="www.rebootradio.nu"> <Alias>rebootradio.nu</Alias> <Context path="" docBase="D:/services/http/rebootradio.nu" debug="1" reloadable="true"/> </Host> </Engine> </Service> </Server> The JSP site doesn't use any WAR files or anything like that; there's just a default.jsp in the specified folder D:/services/http/rebootradio.nu which loads the site. As I said, this configuration worked before, but now with the latest verion of XAMPP and Tomcat it doesn't work anymore. All I get is a 404 message saying The requested resource () is not available.

Read the article

Can't communicate with Primary DNS Server

- by horsley

A computer, with Windows 7, can't access any website by domain suddenly. Whether this computer use a wired link or connect to the WLAN, The fault persists IP and DNS obtained automatically, and seems normal (ipconfig /all return the correct info) I can visit websites by using HTTP proxy The DNS server is available, other computer in my room works properly. I can ping myself, the gateway and any other IP, but domains I can use nslookup and obtain the correct IP info There are some error information in the event log about dns client events explaining the client can not verify the DNS server available Windows network diagnosis explain that Windows can't communicate with the device or resource (Primary DNS Server) I guess the dns client should be blame. I tried to do the following things but the fault persist. Reinstall the driver of network adapter Reset TCP/IP (netsh int ip reset) Reset Winsock (netsh winsock reset) Reset LSP I don't want to reinstall the whole os, what should I do?

Read the article

Zabbix machine is going crazy with HD writes!

- by gshankar

I recently installed Zabbix on a Ubuntu box I had sitting around. It's only monitoring 2 servers but I've noticed that it's continuously smashing the HD with writes. I don't remember Zabbix being this resource heavy when I've used it in the past... Any ideas on why this is happening and what I can do about it? Running iotop gives me this: 1710 be/4 mysql 0.00 B/s 102.12 K/s 0.00 % 0.00 % mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld.pid --socket=/var/run/mysqld/mysqld.sock --port=3306 1723 be/4 mysql 0.00 B/s 0.00 B/s 0.00 % 0.00 % mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld I'm pretty sure it's Zabbix that's causing all that mysql activity as it's the only thing which uses mysql which is running on the box...

Read the article

Where are the Microsoft downloaded app compat updates stored?

- by Ian Boyd

Where are the Microsoft application compatibility update settings stored on a Windows XP, Windows Vista, and Windows 7 computer? Microsoft periodically release application compatibility updates (e.g. KB929427), where they list the shims that should be applied to a program in order to workaround known bugs in the software. Where are these app compat flags stored, and how can i see what shims are being applied? i have a feeling that a recent app compat update included a flag to force a particular piece of software, that we use, to require administrator. Because the task is scheduled to run nightly, and the running user does not have administrative privelages, the task is failing to start. The application is requiring to be elevated. It has the UAC shield overlay. The application has no RT_MANIFEST resource, and the compatibility option Run this program as administrator is disabled (per-user and all users). So all that's left is some secret global setting. i know user-specified compat flags are stored in: HKEY_LOCAL_MACHINE \SOFTWARE \Microsoft \Windows NT \CurrentVersion \AppCompatFlags \Layers

Read the article

apache hangs frequently with semop

- by PiTheNumber

My Apache hangs frequently with multiple threads. Each thread get stucked for hours. Backtrace looks like this: (gdb) backtrace #0 0x00002af60c22b2d7 in semop () from /lib64/libc.so.6 #1 0x00002af60bbf612c in ?? () from /usr/lib64/libapr-1.so.0 #2 0x000055555559e614 in ?? () from /usr/sbin/httpd2-prefork #3 0x000055555559e9ea in ?? () from /usr/sbin/httpd2-prefork #4 0x000055555559f25d in ap_mpm_run () from /usr/sbin/httpd2-prefork #5 0x000055555557a080 in main () from /usr/sbin/httpd2-prefork With strace I see they are waiting for a pipe that is connection all Apache threads. strace -p 3069 .... read(7, 0x7fff16a04df7, 1) = -1 EAGAIN (Resource temporarily unavailable) semop(286162952, 0x2af60bd07dc0, 1 <unfinished ...> What is Apache doing here? How can I figure out what is causing this?

Search Results

Search found 6533 results on 262 pages for 'resource leak'.

Page 147/262 | < Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154 | Next Page >

- by electblake

- by Benjol

- by Silvio Donnini

- by hellohellosharp

- by AKN

- by HelloSam

- by Harry Pham

- by jasonh

- by PapelPincel

- by Keith

- by sunpech

- by Koobz

- by adam

- by John Smith

- by DantheMan

- by A.S.

- by Flavio Oliveira

- by Anth0

- by Jatin Ganhotra

- by user717236

- by gablin

- by horsley

- by gshankar

- by Ian Boyd

- by PiTheNumber

< Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154 | Next Page >