Search Results

Search found 126079 results on 5044 pages for 'windows 2003 server'.

Page 147/5044 | < Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154  | Next Page >

• Windows 7 Not Recognizing Any Hardware, Linux Recognizing Hardware

  - by Newb

  I have a new desktop computer with two SSDs: one running Linux Mint 15 (SSD1), the other running Windows 7 (SSD2). My mint runs perfectly - USB wireless adapter is recognized, SSD2 (connected by SATA) is recognized and accessible through the filesystem, Ethernet works, etc. However, my Windows 7 is not recognizing any of these devices - even plugging in a regular ethernet cable doesn't work. It seems that it's not recognizing any network adapters, and it also doesn't recognize SSD1, connected to the mainboard by SATA. I've installed, uninstalled, and reinstalled Windows multiple times, but the problem persists. I used the Windows 7 CD to install Windows on a machine previously, and that time around, I didn't have any problems, which leads me to suspect that this might be a hardware issue, specifically with the mainboard. My mainboard is an MSI-7641 model, the 760GM-P34 FX. It uses an AMD Chipset and an AMD processor. Can anyone suggest what might be wrong, and how to fix it?

  Read the article

• Can't RDP Into Windows Server After Windows Server Establishes VPN Session

  - by Jennifer Baker

  Hi there. I've setup a Windows 2008 Server in a Cloud Environment. I am able to RDP to this Windows Server ("aka CloudServer") in the Cloud Environment. When I establish PPTP VPN connection from the CloudServer back to our Windows Server ("aka OfficeServer"), my RDP session is dropped and it won't let me RDP back in. The only way how I can RDP to the CloudServer is using the DHCP ip address issued from the OfficeServer. What do I need to change on the CloudServer? Thanks in advance for your help! Jennifer

  Read the article

• MS Access 2003 - Format a Number with Commas AND Auto-Decimal

  - by Emtucifor

  On a report I have a control which is bound to a column which can have up to 3 decimal places. I want the number to format with commas separating thousands and millions, but I also want the number of decimal places to be automatic, so that if there is no decimal portion then no decimal at all is shown. 1234.567 -> 1,234.567 1234.560 -> 1,234.56 1234.500 -> 1,234.5 1234.000 -> 1,234 General format will give me the auto decimal places but no commas. Standard format gives the comma but is fixed to 2 decimal places. Doing my own =Format(Number, "#,##0.#") leaves the decimal point in and doesn't align properly, with extra space on the right of the number. Do I have to write my own VB function to give the format I want? It seems silly that Access (apparently) can't do this out of the box. This also seems really horrible: =Replace(Replace(Replace(Replace(Replace( _ Format(Number, "#,##0.000") & "x", "0x", ""), "0x", ""), "0x, ""), ".x", ""), "x", "")

  Read the article

• windows 7 start menu's search "see more results" broken

  - by fluxtendu

  After searching in my start menu and clicking to "see more results", I got an error dialog: It "seems" that it should be search-ms:query=document an not search:query=document but where can I fix this? Additional info: New user account don't have the problem. Windows 7 Ultimate - RTM Disabling/Enabling again "Windows Search" (in Start Control Panel Programs Turn Windows Features on or off) doesn't fix it. (There's a HKEY_CLASSES_ROOT\Search in my registry that's not there normally.) - outdated see comments... Update: It could help me to diagnose, if someone send me any (hidden) files in %userprofile%\searches and some others pieces of registry: HKEY_CLASSES_ROOT\.search-ms HKEY_CLASSES_ROOT\.searchConnector-ms HKEY_CLASSES_ROOT\SearchFolder HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell\Associations\UrlAssociations\SEARCH HKEY_CURRENT_USER\Software\Microsoft\Windows Search Any other related key that I don't have seen... Final Update: Resolved by the rastamanx answer (I can't accept the answer, because I have offer a bounty without accepted answer, vote for him please)

  Read the article

• mac osx cannot connect to windows 7 machine

  - by Binary X

  I have a Mac OSX (Snow Leopard 10.6.6) setup on a network with several Windows 7 machines. When trying to place a large file on a Windows share the connection to the Windows share gets lost and I am unable to reconnect until I reboot the Mac. I know this is on the Windows side because the Mac can connect and transfer files to Server 2008 and XP without issue. Looking in the log file I see this message SharePointBrowser::handleOpenCallBack returned 12 I have tried restarting the com.apple.netauth.sysagent service but that did not resolve the situation. I can do an nslookup to the Windows 7 machine, but trying to ping the machine by hostname always gives a hostname lookup failure (I can ping via IP address). I cannot connect to the machine via IP adress either. Any help would be appreciated.

  Read the article

• Troubleshooting server performance with a hosted server?

  - by ProfessionalAmateur

  We are in a tough spot, we have a hosted server with the following specs: OS: Windows Server 2008 R2 Enterprise SP1 64bit Processor: Intel Xeon X7550 @ 2GHz (8 processors) RAM: 16GB The file system is on a SAN or NAS (not sure). We are seeing very odd issues where a user will open a 25MB .xslb file and it takes literally 60-120 seconds sometimes. The server is just dog slow for excel. Resources are not being pegged, CPU never jumps up, plenty of RAM... it's just oddly slow. Our host has been looking at the issue for several weeks with not much to show for it. Is there a utility I can run myself that will help trackdown our issue? I have found Server Performance Advisor V1.0 Any experience in using it? Our host is ultimately responsible for fixing this, but we are going on 1 month and our users are losing patience. Any tips would be helpful.

  Read the article

• Error opening hyperlinks in Excel 2003

  - by richardtallent

  When clicking to follow hyperlinks from Excel, I'm now getting this error: Unable to open http://blah... Cannot download the information you requested. The hyperlinks in the Excel file are created using the HYPERLINK() formula. I use Google Chrome as my default browser. The web site in question uses Basic Authentication, and I've entered correct credentials when prompted (the dialog looked like an IE auth box, not Chrome's, but it's always been that way, even when it was working properly). This hasn't been an issue until recently. I'm guessing our IT department made some lame change to IE's configuration that is causing Office to not be able to open the URLs, despite having Chrome as my browser. Things I've checked already: URLs are good, they work fine when pasted manually into Chrome, IE, or Firefox. IE is not set to Work Offline (already found that suggestion on Google). I checked Program Access and Defaults and verified that Chrome is selected. Nothing in the URL requires URLEncoding, so it's no goofy issue with encoding I've had reports from some other users now and then about the same problem, but this is the first time I've experienced it myself.

  Read the article

• Recover Windows 7 from Linux Ubuntu?

  - by macha

  I have two partitions and have Linux Ubuntu running on one partition and Windows 7 running on the other. Now when I try to boot from Windows 7, I get an error saying the /system32/winload.exe file is corrupted or deleted. Now I have Windows 7 files on my system but do not have the DVD, I have made USB bootable with Windows 7, but when I boot it with the USB stick, a blue screen is coming on with weird errors messages. Now I am trying to restore my Windows instance to a restore point where it can work normally. How can I do that in my situation?

  Read the article

• Outlook 2003: open email in edit mode

  - by Eleasar

  Is there some macro (or C# code) to open an email automatically in edit mode? I know i can double click an email item, go to edit and edit message - but can i do this to automatically open an email in this way? Or even better if i could show emails in edit mode in the reading pane?

  Read the article

• Microsoft Access 2003 menu bar is missing under toolbar customize

  - by tintincute

  Last time I was trying to hide the menu bars in my existing database. I added code in my module which I found on the internet. But now when I start Access I can't find the menu bars where I can usually see the File, Edit etc. I tried to restore the default, the menu bar can't be found under the customize toolbar. Any idea what happened? This is added from the website: Dim i For i = 1 To CommandBars.Count CommandBars(i).Enabled = False Next i I tried it but it didn't solve the problem. confused:(

  Read the article

• Referencing a specific figure in Microsoft Word 2003

  - by stanigator

  Referring to the screenshot below: I want to be able to reference the figure in the body of the text properly without having to change them manually every time I add a figure label before that body of text. However, I don't know how to do it aside from adding caption labels, which won't work for cases where I have more than one reference to the figure (at least I don't know how to do that properly anyway). How would you recommend accomplishing that? Thanks in advance!

  Read the article

• Windows Media Center doesn't see my movies

  - by DrJekyll

  I am trying to configure my Windows Media Center (Windows 7 Ultimate). I selected folder with my movies and added it to the library, but when I went to the movies library, it says "There are no items in this library yet - Windows Media Center is searching for media files in the background...". I have all necessary codecs installed, Windows Media Player opens those movies correctly. When I right click on the file - Open with - Windows Media Center it also plays them without any problem. Any ideas why they don't appear in the libraries?

  Read the article

• Ubuntu 10.04 Server on Hyper-V Server R2 has sluggish install and command line

  - by Paul Hobart

  I've installed Ubuntu Server 10.04 (64 bit) on a Hyper-V Server R2. I've encountered two issues that I think are related: Very slow install Very slow command prompt The text-mode installer goes through a series of text-based prompt windows. It takes 7-10 seconds for each of these windows to draw on the screen. The end result is that every time I answer a prompt and hit enter I wait for 15 seconds while the screen redraws line by line. I can literally see each line of text being drawn (like the old 300 baud modems days). Once done installing, scrolling on the command line is super slow. For instance, if a simple command, like "ls", causes the screen to scroll, it will scroll very slowly. This happens on a fresh install. The server functions as a LAMP server and an OpenSSH server, but that's it (I don't even have any Virtual Hosts set up yet). AND this only happens on the Virtual Machine console. I access the console through Hyper-V Manager and don't have this problem on any of my other Virtual Machines. Also, this problem does NOT happen when accessing a shell through OpenSSH. How can I improve this performance issue?

  Read the article

• Windows 8 Restore Problems

  - by Joe

  I created a Windows 8 system image backup on a separate drive before I installed Linux, and during the Linux installation process I accidentally wiped out Windows. I now want to restore my Windows 8 backup that I have on the separate drive. I created a repair USB stick and I followed the directions according to this article. After selecting the image on the hard drive, I get this error: "To restore this computer, Windows needs to format the hard drive." I don't know what this means! The drive partitions are different now then they were when I backup up, so I don't know if that matters. I re-installed Windows and I can restore my files from this backup, but I don't think this covers the registry, etc. I want a full restore. Does anyone know how to fix this problem, or how to restore in a different way? Thanks!

  Read the article

• Defragment / Performance Monitor without Task Scheduler

  - by mjaggard

  My organisation has a policy of disabling Task Scheduler on all servers and workstations (don't ask, I tried once to wrestle the pig). I need to collect performance stats using Data Collector Sets in Windows 7 or Windows 2008 but the Performance Monitor interface requires Task Scheduler to be running. Is this possible because I'm not trying to schedule anything (except the collection of WMI information every 15 seconds but I doubt it hands that task off to the task scheduler)? Is there any way to trick it into thinking Task Scheduler is running? If not, is there any way to temporarily override the group policy to allow Task Scheduler to run? I've found that most group policy can be overridden in this way by an Administrator by editing the registry. On exactly the same vein, I want to defragment a hard disk on one of my workstations, but I can't get it to start because of the dependancy on Task Scheduler - is it possible to overcome this?

  Read the article

• Reading PFS First Choice and Word Perfect 5 files in an XP or Windows 98 environment

  - by indyK1ng

  Hello all, My priest has 3 computers, Windows 3.1, Windows 98 and Windows XP. Recently his power supply blew out on his Windows 3.1 computer and he needs to get to the data on the hard drive. He's looking into imaging the hard drive and setting it up as a VM, which might be a bit much for him. Ignoring getting the data off the hard drive as a separate problem, are there any programs out there that can read files from PFS First Choice and Word Perfect 5. He already has Microsoft Office so solutions involving that are preferable. If he can install the software on his Windows XP or 98 computer, that would be helpful too. Thank you for your help

  Read the article

• Can't connect to exchange thru my smart phone

  - by Hoorayo

  We just moved Exchange server from our company to Local data center. Everything is working except mobile access. There is no problem with receiving and sending email from outlook of my laptop, but I can’t connect to exchange server from my smart phone to receive email. While I am setting up exchange account for my phone(Google) , it recognizes when I put wrong password. But it says “Unable to open connection to server” with right password and ID. Is there any option for IP address for this service when I move my server to different location? Please, help me out for any clue.

  Read the article

• How do I troubleshoot root cause of a hung windows (2003) server?

  - by GregW

  I have a pair of Windows (2003 Server) servers both running MS SQL Server (2008 EE) that each hang every few months. This has been occurring intermittently :( for the past 15 months pretty much since we started using the servers. The symptoms are as-follows: I cannot remote desktop in to troubleshoot; when I attempt to, I get stuck on a blank black screen and am never offered a login prompt I can still ping the servers I can still open a SQL connection to the server, and, CURIOUSLY/BIZARRELY, when I do a "select getdate()", the time it returns appears to be stuck on the exact fraction of a second when (I presume) the server hung. Repeated attempts to do "select getdate()" keep getting that same date, suggesting that the clock is frozen. Filesharing attempts to connect to the hung server fail with the error message: "\ServerName is not accessible. You might not have permissions to use this network resource. Contact the administrator of this server to find out if you have access permissions. The server's clock is not synchronized with the primary domain controller's clock." This is consistent with a frozen clock. Post-reboot, if I investigate the Windows Event Viewer logs, I can see many security accesses (coming from me and others) that I recognize were login attempts during the "down" period, but all of them in the security log are associated with that same timestamp of when the server hung. This also suggests the clock is frozen. There is not a clear cause in the Application or System event logs. I have a local Admin account on the server and am in the process of getting a domain-credentialed Admin account for better remote admin access. HP is supposed to be supporting these machines and has some low-level ILO2 access but they seem incapable of finding the root cause. A reboot will "fix" the problem but I would like to get to the root cause and solve the issue. Has anyone ever seen something like this odd clock behavior?! (If it were just one server I'd perhaps say a bad hardware clock, but two?) Can anyone advise me on what I should try to troubleshoot this sort of situation to find the root cause (or what I should tell HP to try?)

  Read the article

• Windows Experience Index could not be computed

  - by Alexey Ivanov

  I've upgraded recently from Windows Vista to Windows 8. When I try to rate my computer, it accesses DirectX 9 performance, then processes to DirectX 10 tests: And it gets stuck at this point. In 5–10 minutes, it shows error message: The video card is rather old: Mobile Intel 965 Express Chipset Family. I'm pretty sure it does not support DirectX 10. Why does Windows assess it with DirectX 10? And how can I make it skip DirectX 10 tests and get the system rating? The driver was installed automatically by Windows 8 from Windows Update. Version: 8.15.10.2697 Date: 10/01/2012

  Read the article

• create print server port via command line error Win 8

  - by Benjamin Jones

  I need to create a Print Server Port via commandline in Windows 8 Per Google search I should be using prnport.vbs script to do so: cscript c:\Windows\System32\Printing_Admin_Scripts\en-US\prnport.vbs -a -s \\192.168.113.253 -r Xerox_192.168.113.253 However I get this error: ** Unable to connect to WMI service Error 0x800706BA The RPC Server is unavailable. ** I looked at local services and both RPC and WMI services are started . Also I made sure add remote admin rule to Windows Firewall via command line without success!: netsh advfirewall firewall set rule group="windows management instrumentation (wmi)" new enable=yes netsh advfirewall firewall set rule group="remote administration" new enable=yes NOTE: If I use the GUI to create the print server port then add the printer via command line: rundll32 printui.dll,PrintUIEntry /if /b "Xerox WorkCenter 7535" /F C:\Windows\Inf\WC7545-7556_PCL6_x64_Driver\x2DNORX.inf /r "Xerox_192.168.113.253" /m "Xerox WorkCentre 7535 PCL6" THE PRINTER IS SUCCESSFULLY ADDED. So its NOT the printer it self! So how can I successfully add a print server port via command line? Thanks

  Read the article

• Migrating Windows 2008 R2 to Windows 2012 (migrate all FSMO too)

  - by Mauro

  I own 2 server with Windows 2008 R2, both DC. The first one is of course the Primary DC (with all FSMO). What I would like to do is ro dcdemote the 2nd DC, remove it from domain and replace the Windows 2008 r2 with 2012. I will then rejoin this 2nd DC (with the new 2012 server) to domain and dcpromo it (Server Management). After this is a new DC I would like to temporary transfer all the FSMO to this server, while I'm doing the same operation on what is actually the Primary DC. Is this a stupid solution? What I would like to do is a clean installation, I don't want to upgrade directly those systems. Suggestions? Ideas? Thanks, Mauro

  Read the article

• How do I change the format of group by data in Excel 2003 pivot tables

  - by Bernard

  I have a data that lists the value of a contract per contract number. So I've created a pivot table that counts the number of contracts valued at 0 - 10, 11 - 20, etc. I want to be able to format the group, e.g. $0 - $10, $11 - $20 I've tried formatting the underlying data as currency and formatting the column in the pivot table, but it still shows as 0 - 10, 11 - 20 Also I have a column in the pivot table that says Total which is the Count of the number of contracts in that range, i.e. Value Total 0 - 10 1 11 - 20 1 Its an autogenerated column heading that Excel put in. How do I change this to say Number of contracts. I want it changed because when I chart the pivot table, the series is called called Total :(

  Read the article

• Windows Live Writer fails to start

  - by Albert Bori

  I installed windows live writer and configured it to connect to my xmlrpc enabled blog engine. After doing so, it threw an unrecoverable error and closed down. After attempting to restart windows live writer, it throws the following exception each time: Description: Windows Live Writer has encountered a problem: Invalid URI: The hostname could not be parsed. Problem signature: Problem Event Name: WindowsLiveWriter Problem Signature 01: CreateThis Problem Signature 02: 115 Problem Signature 03: System.UriFormatException Problem Signature 04: 15.4.3555.308 Problem Signature 05: 2.0.50727.5456 Problem Signature 06: Windows Live Writer OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1033 Since I was unable to start windows live writer at all, I tried uninstalling it and removing all files associated with it in my "C:/users/[username]/appdata" folder. After that, I re-installed it and still get the error every time I try to launch the application. Does anyone know how I can get around this?

  Read the article

• How to have your DNS servers forward queries for internet names

  - by Xavier Hutchinson

  I have 2 Domain Controllers / DNS servers on Windows 2012, their IPs are 10.0.1.10 and 10.0.1.11 Another server acts as the DHCP server for clients, and sets their primary and secondary DNS to the IP addresses of the previously mentioned domain controllers / DNS servers. However I cannot resolve internet domain names, presumably as they are not hosted on the DNS servers. So my question is what do I have to do on my setup to resolve external domains? Thank you! Xavier.

  Read the article

• Referencing a specific figure in Microsoft Word 2003

  - by stanigator

  Referring to the screenshot below: I want to be able to reference the figure in the body of the text properly without having to change them manually every time I add a figure label before that body of text. However, I don't know how to do it aside from adding caption labels, which won't work for cases where I have more than one reference to the figure (at least I don't know how to do that properly anyway). How would you recommend accomplishing that?

  Read the article

< Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154  | Next Page >