Search Results

Search found 7770 results on 311 pages for 'timothy high'.

Page 148/311 | < Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >

• Setup Cisco RVS4000 QOS for VOIP

  - by andyknas

  Just switched from dedicated T1's with analog phone lines to cable modem with 10/2 uplink. We're having some VOIP call quality issues on the outgoing side when bandwidth is stressed and I need to setup QOS or a VLAN on our RVS4000 router. Currently all phone traffic (talkswitch device and ip phones) are on it's own d-link PoE switch, and all workstations are on a LinkSys 1GB switch. Both switches are plugged into ports on the RVS4000. I'd like to set it up so that the dlink port has ~512Mbsp dedicated to it for voice at all times. It's my understanding that with a VLAN or QOS I can set this up. I've got QOS setup already with port 5060 to have high priority but it doesn't seem to make a difference.

  Read the article

• Laptop LCD Screen Flickering

  - by BSchlinker

  I recognize this is most likely not a software error and likely lies in one of the hardware components. However, about 3 months ago I replaced the LCD screen on this laptop. The company which I bought it through provided a 12 month warranty. Before I contact them, I would like to verify that the problem is most likely the LCD screen and not the inverter. Any comments? I recognize its impossible to diagnose hardware remotely, but it would be nice to know if there is a high probability it could be a component other then the LCD screen.

  Read the article

• SSD for Visual studio : Intel X25-m G2 or OCZ Vertex

  - by meska

  hi, looking for laptop upgrade, and thinking about SSD drive. Laptop would be Dell Studio XPS with T9400 as i can get one for a very good price. So i was thinking about replacing the built in 500 GB hdd with some kind of SDD Currently two choices: OCZ Vertex Series 60 GB vs. Intel X25-M G2 MLC 80 GB Price is almost the same. From anandtech Intel performs badly in sequential write, but scores very high numbers in random write and random read (good for visual studio?) and i get more space. What do you think? OCZ Vertex or Intel X25-M G2 ? Purely from Visual Studio 2008 and upcoming 2010 perspective?

  Read the article

• Mysql out of disk space

  - by Paddy

  I have just finished developing a rails app which has a mysql db as a backend. The app is meant for high traffic and will store lots of information. I am planning to set up my own web server and host the site from it. If in future my disk space runs out i would want to expand by adding more space. But say if my mysql database is housed in my /disk0s1 and by adding a new drive i have more partitions (and hence more disk space), how then would i extend my database to store information on those partitions too, and at the same time prevent any information from being written on the original partition. Should i go for multiple databases? if so how? If i went for a hosting solution i wouldn't be bothering about this as i would just have to worry about making payments for the extra space :) I always wondered how space is added on-the-go by these webhosts. Is there any specific mysql configuration that i have to make?

  Read the article

• How to use dd to make splitted ISO images from an storage device?

  - by Gustavo Bandeira

  This is a double question, I just hope it's valid. I need to know how to use dd to make splitted ISO images from some storage device, I'm doing it through SSH: the process is slow and the risk of faling at the mid of the operation (1) is high then I need to know how to make these splitted ISO images from my storage device. (2) I'm searching for some reference on dd, it could be a book or a good website about it for when any doubt arises. 1 - I'm doing it on a ~60GB storage device, it took me a whole day to copy ~10GB from this disk. 2 - For curious people, I'm trying to recover an accidentaly deleted file from an iPod, until now I've been able to make the whole process, I just need to improve it beucase I left it copying the disk yesterday: Today it gave me an error when it was at ~10GB.

  Read the article

• hp smart array lock up code 0x15, what is that? (or where can I get a list of descriptions of HP smart array controller lock up codes)

  - by user47650

  Hi, I've had a couple of Dl180 6g boxes hung over the last week, each have a P410 smart array controller. upon reboot the server has indicated that a controller failure event occurred and the previous lock up code was 0x15 - the server rebooted without issue. However there was nothing in the IML log, but the ADU report provided the following; Trap Address High Or Post Results Lockup Reason Or Post Error RIS Updates Or Post Error Detail Firmware Version Trap Address Low 0x8087 0x0015 0x0000033e 0x015e 0xd65c any suggestions on what that code is, my google fu failed. And hp support have not responded with any detail as yet.

  Read the article

• which factors determines the speed of a processor? [closed]

  - by Deb

  I think that clock rate of processor determines the speed of core, in my case it is 1.86GHz. But If I am not wrong, it also determines that how much energy it will consume. If you have more frequency then more power it will consume. I choose Power Saver scheme to increase my battery life, however it reduces my core speed to half of the actual speed. I understand this happens because of SpeedStep, but I don't see any slowdown of my computer. So my problem is why we have such high frequency cores as it uses too much power. We can use low frequency cores. Actually I get confused between the two terms Speed of the processor and its frequency. So how much important is the frequency of core in case of any processor.

  Read the article

• keyboard key mapping gone haywire

  - by arvind

  I have a Sony VGN-CR353 running Windows 7 Ultimate. For typing purposes I use two keyboards: The Inbuilt Laptop Keyboard A Standard External Desktop Grade USB Keyboard Since yesterday, My inbuilt keyboard's keys have gone all awry. This is Similar to http://superuser.com/questions/11537/keyboard-keys-not-working-or-resulting-in-the-wrong-key But the high point is that the external keyboard is working just fine. I have already tried System Restore, Reinstalling Keyboard Drivers etc. but to no avail. This is really bugging. Please Help. Thanks in Advance.

  Read the article

• How does one calculate voltages for overclocking?

  - by TardisGuy

  So, all I know is voltage and clock have something to do with each other. Unstable if too low voltage Too high voltage, and too much heat. or higher voltage + lower clock may heat less than that voltage at higher clock. The reason why im asking is because if I can learn how the power vs speed works, Then i might be able to project some kind of thermal curve to find out where my perfect overclock might be (without 50 burn-ins) But, as is apparent im sure. I have no idea what im talking about. If anyone can help me learn more about this; throw me a page, a macro, whathaveyou I will bow before your awesomeness and... Mail you a phantom hand written thank you letter. Some clarification Rev 1 What im trying to learn: is how much power a cpu is using with measurements (Core Voltage) vs (Clock speed) - It would answer the question: Would a 1.4v core @ 4.0Ghz use as much power as a 1.4v core @ 3.0Ghz?

  Read the article

• Windows FAT/NTFS Low-Level Disk Viewer (Norton DiskEdit alternative)

  - by Synetech inc.

  Hi, One of my most valuable software tools has always been Norton DiskEdit from Norton Utilities/Symantec Systemworks. I have used it for years for so many things, including, but not limited to learning file-systems. I am now in search of a similar tool that can let me view FAT and NTFS disks at a low and high level under Windows. I have seen Runtime Software’s DiskExplorer, but unfortunately, it is limited in a number of ways, particularly annoying is that it does not really let you view the disk as structured (it does not let you see directory entries from a directory that is fragmented like DiskEdit can without doing a too-exhaustive scan which doesn’t even work for FAT partitions that have cluster sizes <4KB). Does anyone know of a Windows alternative of a Norton DiskEditor? Thanks a lot.

  Read the article

• Can't find instructions how to use Windows 7 drivers on Windows Server 2008 R2

  - by Robert Koritnik

  Maybe I should post this to http://www.serverfault.com. Windows 7 comes with all sorts of signed drivers so there's high probability that all drivers for your machine will be installed during system setup. On the other hand Windows Server 2008 doesn't event though it's practically the same OS when it comes to drivers. But I know that this has a very good reason. It's a server product, not a desktop one. But the thing is that many power users and developers use server OS on their workstations which are normally desktop machines and would need Windows 7 driver spectrum... Question I know I've been reading about some trick on the internet that first installed Windows 7 on the machine, than do something to get either all Windows 7 driver collection or just those installed, and then install Windows Server 2008 and use those drivers. The thing is: I can't seem to find these instructions on the internet any more. If anybody knows where these are please provide the link for the rest of us.

  Read the article

• Can't find instructions how to use Windows 7 drivers on Windows Server 2008 R2

  - by Robert Koritnik

  Windows 7 x64 comes with all sorts of signed drivers so there's high probability that all drivers for your machine will be installed during system setup. On the other hand Windows Server 2008 R2 doesn't. Event though it's practically the same OS when it comes to drivers. I know there's a very good reason for this difference. It's a server product, not a desktop one. But the thing is that many power users and developers use server OS on their workstations which are usually desktop machines (a bit more powerful though) and would benefit from the whole driver spectrum that Windows 7 offers... Question I know I've been reading on the internet about some trick where you first install Windows 7, than do something to get either all Windows 7 drivers or just those installed, and then install Windows Server 2008 R2 and use those drivers of Windows 7. The thing is I can't find these instructions on the internet any more. If anybody knows where they are please provide the link for the rest of us.

  Read the article

• Migrating Shared Hosting and Email

  - by Chrisc

  Hey Guys, I know there has already been a question that has been posted here about migrating shared hosting accounts, but wanted to get a second opinion on my plan to move hosting providers. My business is moving our shared hosting account (hosting and email) to a new provider, and would like to have minimal downtime. Here is our current plan: Create a backup of our old site Upload our site to the new host Set up duplicate email accounts with our new host Change the name server records on our domain to point to our new host Leave our old site up long enough for DNS records to propagate completely. I'm hoping this should result in little downtime for both website and email. Because of the volume of high-importance emails our company receives on a daily basis downtime is very expensive and not tolerated. Thanks, Chris

  Read the article

• Running a small IPTV station

  - by nixterrimus

  I'm looking to run an iptv station for my dorm. I know I can serve multicast so that's not a problem. The station will serve out podcasts and other cc licensed content. The target endpoint is xbmc- a media center. So far I know that I need to serve an rtp stream over udp that's streaming an mpeg-4 avc main or high profile with aac ( or ac3 ?) audio. I've had some luck using vlc with vlm to stream but it seems limited. What are my other options?  Everything has to run on Linux- hopefully open source. How can I use playlists and not live streams? What are my software options?

  Read the article

• Connecting to VPN via Proxy

  - by Rodrigo

  Hi, My company's VPN server is located in Netherlands, from my current location this is a really crappy place in terms of connectivity, connection keeps dropping, it's slow and keeps being reset during high traffic times. I have a dedicated server over USA which is able to connect to VPN server without this issues, connection is stable and fast. My question is, how do I connect to this VPN using a proxy running on my dedicated server? I'm on Windows 7 using a VM on XP to connect to the VPN. Thanks.

  Read the article

• Website Content via remote mysql or API for clients

  - by Kannan

  I would like to know whether there will be problem for shared hosting/vps/dedicated users if they request content via remote mysql or via http API. ? What will be issues if they make every request to production server for delivery of the website articles along with image urls etc. Will it cause disk wait on shared/vps/dedicated hosting users ? Will both remotemysql or http api or curl cause high CPU usage, I/O wait or Memory usage ? What should be best for speed remote mysql or http web api ? or any alternatives ? Thanku Kannan

  Read the article

• how to best config for synflood setup in csf but web response still fast

  - by Binh Nguyen

  my server down random every day 4-5 time cause get high load very quick.. I have install csf and with some config server now stable.. load around 5. BUT the big isuse is : the real user very hard to access website specially from IE browser you can test at xaluan.com the flowing is config using in csf: SYNFLOOD = "1" SYNFLOOD_RATE = "100/s" SYNFLOOD_BURST = "10" CONNLIMIT = "80;30" PORTFLOOD = "80;tcp;70;5" CT_LIMIT = "29" # other config may same as default i playing around with this config for a week but still not work around.. If increase the rate SYNFLOOD_RATE = "140/s" or more.. the website response very fast.. be side have bad effect of server load increase so fast normal 20 and may be up to few hundred in peck time .. my need is response time fast but load still low.. please help thanks ps: server runing nginx frontend, apache, mysql, php ,, the home page has around 70 elements which will cached in browser in fist time access..

  Read the article

• What is the best/easiest way to use scripts to analyze network traffic?

  - by yungin

  I'm looking to analyze packets via scripts. I'd like to use something high level. I'm in a mac/linux environment. I'm currently looking at different python+libpcap libraries. Perhaps lua+wireshark too. Maybe tcpdump+bash (but not sure that has a lot of info i can use). I also heard good things about scapy. Not sure. I'm wondering if you have any recommendations? There's quite a few of them out there. What have you found that works best? I'd definitely want something scriptable not something that I need to compile (like c/c++, etc)

  Read the article

• Live noise-filter on line-in

  - by Damon Gant

  I'm running the following setup: Xbox 360 is hooked up to my (PC) screen via HDMI/DVI converter. Because the Xbox has no dedicated sound output, except for optical S/PIDF, I'm also using the AV/RCA output, namely just the audio, which is connected to an old stereo, which is then connected to my PCs line-in. I'm now experiencing a some of noise. I'm using one of the standard "Realtek High Definition Audio" cards, which doesn't seem to offer this kind of functionality. Is there a software that will playback audio right off a device while running filters on it? It doesn't have to create a device on its own, I just want to listen to it. Here's a sample: http://puu.sh/1suY6

  Read the article

• MySQL 5.5 on Windows server is horribly slow

  - by Brad

  I have had no luck getting MySQL 5.5 to be as fast as 5.1 or MariaDB on the exact same hardware/database/environment under Windows server 2003R2 or 2008R2. My benchmarks from our application: MySQL 5.5 + CentOS 5.2 (XenServer Virtual) = 28 seconds (box is "busy" not buried) MariaDB (5.1) + Windows 2003 (Physical box) = 130 seconds (box is 2% busy) MySQL 5.1 + Windows 2003 (Physical box) = 170 seconds (box is 2% busy) MySQL 5.5 + Windows 2003 (Physical box) = 305 seconds (As high as 600 seconds...) (box is 2% busy) The only difference between these runs is the removal of skip-locking and the running of mysql_upgrade.exe to update some tables for stored procs on 5.5. Yes, I know it's a release candidate, I'm feeding that back to MySQL as well. No slow queries are logged, it doesn't think it's being slow, it just is. I'm going to start tearing into the queries themselves to see if the INSERT/SELECT plans have gone buggo on 5.5. Any help would be appreciated! Thanks

  Read the article

• Online backup solution

  - by Petah

  I am looking for a backup solution to backup all my data (about 3-4TB). I have look at many services out there, such as: http://www.backblaze.com/ http://www.crashplan.com/ Those services look very good, and a reasonable price. But I am worried about them because of incidents like this: http://jeffreydonenfeld.com/blog/2011/12/crashplan-online-backup-lost-my-entire-backup-archive/ I am wondering if there is any online back solution that offers a service level agreement (SLA) with compensation for data loss at a reasonable price (under $30 per month). Or is there a good solution that offers a high enough level of redundancy to mitigate the risk? Required: Offsite backup to prevent data loss in terms of fire/theft. Redundancy to protect the backup from corruption. A reasonable cost (< $30 per month). A SLA in case the service provider faults on its agreements.

  Read the article

• How to get better video quality in Lync?

  - by sinned

  I want to use a ConferenceCam from Logitech to stream talks live via Lync. When I view the RAW webcam image via VLC, the quality is very good (but the latency is high because of buffering). However, when I stream it using Lync, the video gets blurry. Is there a way to ensure QoS in Lync or otherwise improve the video quality to (near-)native? I would rather have some dropped frames than a lower resolution where I can't read the slides. In my setup, I use Lync with an Office365-E3 contract, so I have no Lync-Server in my network. I thought about replacing Lync completely with VLC, but I first want to try Lync because VLC will probably cause firewall issues. Also, I haven't looked up the VLC parameters for less buffering, faster encoding, a bit lower resolution (natively it's more than HD) and streaming.

  Read the article

• Virtual Machine Manager 2012 CPU Average

  - by Grant

  What exactly is the CPU Average field in VMM 2012 showing me? I'm running Server 2008 R2 with VMM 2012. My server has 2x16 core CPUs installed. An example virtual machine has 4 virtual processors, and shows 20% CPU usage. Is that: 20% of the entire system's available CPU power? 20% of 4 of the 32 core's CPU power? 20% of one core's CPU? (in which case it could go as high as 400%) Something else entirely? How can I tell how much of the entire system's CPU power is being used (all 32 cores)? Edit: Well, I can tell for sure it's not 20% of the entire system's CPU power - since the entire server's CPU averages add up to well over 100% right now.

  Read the article

• MacBook can't use internet, but nslookup and ping both work

  - by Joel Coehoorn

  I have a user with a new high-end MacBook Pro that can't use the internet. He can connect to either our wired or wireless network and do things like browse file shares, but can get no further. When I brought the machine in for testing, I found that I could do an nslookup just fine, and I'm able to ping addresses returned by nslookup just fine. I'm even able to bring up web pages by entering the IP address into the address bar directly. However, when I try to ping the domain name rather than the IP address, it just sits there. So apparently I can either do name resolution or communicate with an address, but not both at the same time. Again, these symptoms occur on both the wired and wireless network. Other machines on our network, including a few other Macs, don't have this issue. Any ideas?

  Read the article

• Using airport extreme base station as a wireless G to wireless N bridge

  - by micmcg

  Due to unfortunate placement of various wall outlets in my new apartment, my adsl 2 modem + router is not able to be placed next to my airport extreme base station (AEBS). I'd prefer not to run cat5 cable between them, but I still want to use the wireless N on the AEBS, because it will have a high speed NAS plugged in via gigabit ethernet so I want to maximise the wireless transfer speed to my 27" iMac. Is it possible to use one of the radios in the airport extreme to bridge the wireless G network with the router, and the wireless N radio to broadcast normally? The only traffic going over the G network should be internet (24mbps ADSL2) so it should never get saturated. Thanks

  Read the article

< Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >