Search Results

Search found 45894 results on 1836 pages for 'super'.

Page 149/1836 | < Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >

• bypass PAE, NX, and SSE2 upgrade requirements from windows 8 to windows 8.1

  - by Jonathan

  On one of my old computers I am having the problem of upgrading to windows 8.1 because my computer does not support PAE, NX, and SSE2. How was I able to install windows 8 in the first place? I heard the original requirements for windows 8.0 were PAE, NX, and SSE2. Anyone know a bypass for this on a machine already running windows 8? IMO 8.1 should have been released in the form of a service pack not an entirely new windows.

  Read the article

• Multiple Time Machine Network Backups

  - by churnd

  I have FreeNAS servers at work and at home. Both are set up to back up via Time Machine. Is there a way I can tell my Macbook Pro to use both without having to manually switch in the Time Machine Preferences?

  Read the article

• Windows 7 x64 blue screen of death

  - by emmettnicholas

  I've been running Windows 7 Ultimate x64 on my HP EliteBook 8530w for a few months now, and during that time, it has blue-screen-of-deathed 3 times. This time, I was able to snap a pic with my cellphone before it automatically rebooted: Any idea what might be causing this? Thanks! EDIT: I ran BlueScreenView, which showed 6 crahes: Bug Check String Caused By Driver ---------------- ---------------- IRQL_NOT_LESS_OR_EQUAL hal.dll DRIVER_POWER_STATE_FAILURE ntsokrnl.exe DRIVER_POWER_STATE_FAILURE ntsokrnl.exe BAD_POOL_CALLER NETw5s64.sys SYSTEM_SERVICE_EXCEPTION ntsokrnl.exe DRIVER_POWER_STATE_FAILURE ntsokrnl.exe

  Read the article

• Linux Kernel Packet Forwarding Performance

  - by Bob Somers

  I've been using a Linux box as a router for some time now. Nothing too fancy, just enabling forwarding in the kernel, turning on masquerading, and setting up iptables to poke a few holes in the firewall. Recently a friend of mine pointed out a performance problem. Single TCP connections seem to experience very poor performance. You have to open multiple parallel TCP connections to get decent speed. For example, I have a 10 Mbit internet connection. When I download a file from a known-fast source using something like the DownThemAll! extension for Firefox (which opens multiple parallel TCP connections) I can get it to max out my downstream bandwidth at around 1 MB/s. However, when I download the same file using the built-in download manager in Firefox (uses only a single TCP connection) it starts fast and the speed tanks until it tops out around 100 KB/s to 350 KB/s. I've checked the internal network and it doesn't seem to have any problems. Everything goes through a 100 Mbit switch. I've also run iperf both internally (from the router to my desktop) and externally (from my desktop to a Linux box I own out on the net) and haven't seen any problems. It tops out around 1 MB/s like it should. Speedtest.net also reports 10 Mbits speeds. The load on the Linux machine is around 0.00, 0.00, 0.00 all the time, and it's got plenty of free RAM. It's an older laptop with a Pentium M 1.6 GHz processor and 1 GB of RAM. The internal network is connected to the built in Intel NIC and the cable modem is connected to a Netgear FA511 32-bit PCMCIA network card. I think the problem is with the packet forwarding in the router, but I honestly am not sure where the problem could be. Is there anything that would substantially slow down a single TCP stream?

  Read the article

• How do I decrypt a password-protected PDF on OSX?

  - by Brant Bobby

  I have a PDF that requires a password to view. I know what the password is. I frequently open this PDF to print it, and find entering the password each time incredibly annoying. How can I remove the password from the PDF? Since I need to print it, simply taking a screenshot isn't a good solution. I tried printing the file to a PDF, but Preview disables the "Save as PDF..." option in the print dialog.

  Read the article

• Google Public DNS is not used in trace route

  - by IT researcher

  In my PC i am using google public DNS as DNS server.In Internet protocol(TCP/IP) properties i have set Preferred DNS server as 8 8 4 4 and Alternate DNS server as 8 8 8 8. According to me this DNS server should be used to resolve any request to website to its IP by using this DNS servers.(see google DNS and How Domain Name Servers Work). But when i checked trace route to a website in my PC i got following Tracing route to www.google.com [74.125.236.80] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.1.201 2 360 ms 349 ms 292 ms 122.178.216.1 3 145 ms 107 ms 148 ms 122.166.32.121 4 32 ms 53 ms 120 ms 122.166.32.9 5 45 ms 42 ms 121 ms 122.175.255.29 6 63 ms 76 ms 51 ms 182.79.255.45 7 52 ms 134 ms 61 ms 72.14.194.22 8 86 ms 59 ms 72 ms 72.14.232.202 9 106 ms 107 ms 60 ms 66.249.94.39 10 101 ms 103 ms 117 ms 209.85.249.235 11 148 ms 224 ms 276 ms 74.125.236.80 Trace complete. When i checked all these IP in who.is i found that it is of my ISP. So my question is where does Google public DNS is used? Also how come my ISP's nameserver is used even if i set google public dns as my dns server in my PC?(OR does my any settings are wrong)

  Read the article

• How to unlock files using handle.exe and process name?

  - by Radek

  I tried Unlocker 1.9.1 but it doesn't work correctly for me on Windows7 (worked ok on Windows XP) and also I tried LockHunter 2.0.2.103 x64 and reported a bug but .... LockHunter actually unlocks the file from GUI but not from command line. So I want to use handle.exe by SysInternals to unlock one file "TestPro.log". I know the absolut path if it helps. I can list and all processes that locked the file by executing C:\Windows\system32>c:\edutester\progs\handle testpro.log java.exe pid: 2120 type: File 338: C:\Users\Public\TestPro \TestPro Automation Framework\Logs\TestPro.log java.exe pid: 1004 type: File 934: C:\Users\Public\TestPro \TestPro Automation Framework\Logs\TestPro.log What I need to know how to unlock the file using above info from command line automatically. No user intervention is possible. Windows 7 64bit Microsoft Windows [Version 6.1.7601]

  Read the article

• Is there a taskbar for OS X?

  - by Paul Biggar

  I'd like to permanently see a clickable list of windows I have open, in the same way that the taskbar allows in Windows. Can I do this on Mac? Some details: i have many virtual desktops (spaces), so often a single application has windows on many of them. I often have multiple windows of each application, such as the terminal or browser, on the same virtual desktop I have multiple monitors, if it matters. Edit: When I say 'permanently see a clickable list of windows I have open' I mean that I want to see every window I have open, and I'd like to be able to click on each one to open that window. I'm not looking for the newer behaviour where tasks are clustered by application.

  Read the article

• Does the Win XP/7 dual boot "missing restore points" problem apply to systems with separate hard disks for each O/S?

  - by Robert Oschler

  I'm in the process of installing Windows 7/64 on a system with Windows XP/32 on it. During my research, I read about a problem that occurs in the dual boot scenario where Windows XP deletes Windows 7's restore points when it accesses the Windows 7 volume: http://support.microsoft.com/kb/926185 I found a workaround but it seems pretty painful since it appears to involve using the registry to make the Windows 7 volume appear invisible or "offline" to Windows XP, making sharing disk data between the two O/S annoying since you have to use something like an external storage device to get it done: http://www.vistax64.com/tutorials/127417-system-restore-points-stop-xp-dual-boot-delete.html I was wondering if this problem only occurs with systems that have both O/S installed on the same physical hard drive (in different partitions)? In my case, I will have each O/S on a completely separate physical hard drive. Any other tips would be appreciated. -- roschler

  Read the article

• Free web based FTP storage

  - by asksuperuser

  Is there something equivalent to WebDrive but free or open source?

  Read the article

• Windows 7 installation reboot loop

  - by Auswoolf

  Upgrading from Vista home premium to win 7 hoe premium from DVD ex Digital river on gigabyte VM900m; core 2 duo 2.13GHz 2GB ram; Western digital 250GB HD. Got as far as "Expanding Windows files ...100% the error message "Computer encountered unexpected error... To install windows press OK to restart computer and reinstall windows" The computer then reboots, loads Windows 7 (new logo) a essage that says "setup is starting services" then the error message comes back. I can get into BIOS to change boot priority but the computer just ignores this and goes through the same sequence. At the point of "to boot from CD/DVD press any key" my keyboard is deactivated and i cannot make a choice and the sae sequence occurs. I cannot break the sequence - I have push every key, disconnected every external device including HDMI screen, but nothing stops the loop. Any ideas? Auswoolf

  Read the article

• How to set resolution on mplayer with libcaca?

  - by AndrejaKo

  I'm using mplayer and libcaca on Gentoo. My framebuffer (uvesafb) is running at 1920x1200 (I don't know how many characters that is) and mplayer has problems filling up the screen, so video and audio lose synchronization. I'm looking for ways to improve performance. The most obvious solution would be to decrease resolution of mplayer, so I'm looking for ways to do that. Any other performance tips would be appriciated.

  Read the article

• Mini DisplayPort to DVI-D Dual Link up to 2560 * 1600

  - by Steinway Wu

  I have a ThinkPad T530 with Mini DP++ and NVS 5400M, which are said to support 2560 * 1600 resolution. The display is Dell 3007WFP, which also supports 2560 * 1600. But, I have never seen any cables or adapters that can connect them with full support to 2560 * 1600. Do you have any idea? THANK YOU! In addition, I found that mDP++ means I can use a passive adapter. No need for active adapter which is much more expensive. This is the only one that meets my needs, but it is not sold in the US. And this one seems to be OK, but I am not sure because it says "2.5 Gbps per channel", which may not be enough.

  Read the article

• HP Pavilion dv3 volume control display driver on Windows 7

  - by Farinha

  I've recently bought an HP Pavilion dv3-2150ep and I'm having a hard time getting the volume control display to work as expected. The control is a back-lit touch-sensitive bar above the keyboard. Now the buttons to turn the volume up and down actually do it, but the lightning is not changing at all. The mute button does change color when toggled. I'm not sure if I'm missing any drivers here (I've installed all of those on the HP support page that seem to have something to do with sound and/or display) or if I have to activate this somewhere. Any ideas?

  Read the article

• windows 7 no internet access

  - by Kyle

  Just did a fresh install of Windows 7, and the network and sharing center says no internet access. Disabling and enabling the adapter seems to fix the issue temporarily, but the internet stops working shortly after. I have installed the latest NIC drivers and have installed all Windows updates. I have also tried manually setting the ip/gateway/dns and running netsh int ip reset in an elevated command prompt. I am running Windows 7 Home Premium 64bit with a wired connection. I have searched for hours, but have found no working solutions. Does anyone have any ideas?

  Read the article

• Force netsh/arp binding multicast IP addres with specific MAC address

  - by Olivier

  I would like to setup an binding from an IP address to a MAC address using netsh. Goal is to bond an IP address which is a multicast address (224.224.x.y) to a given MAC address (which is NOT the calculated one from the multicast IP address : 01:00:5e:X:Y:Z It used to work with Windows XP (was it a bug that used to be "perfect" for my needs?), but Windows 7/8/8.1 forces the MAC address to the calculated one instead of letting me put what I want! (http://nettools.aqwnet.com/ipmaccalc/ipmaccalc.php shows MAC address calculation for multicast IP address) Thus I'm doing the following. Listing existing mappings: netsh.exe interface ip show neighbors "Ethernet" Interface 12 : Ethernet Internet address Physical address Type 224.0.0.22 01-00-5e-XX-YY-ZZ static Then adding my interface mapping manually: netsh.exe interface ip add neighbors "Ethernet" "224.xxx.yyy.zzz" "00-80-EE-UU-VV-WW" Finally, listing again my mappings: netsh.exe interface ip show neighbors "Ethernet" Interface 12 : Ethernet Internet address Physical address Type 224.0.0.22 01-00-5e-XX-YY-ZZ static **224.xxx.yyy.zzz 01-00-5e-UU-VV-WW static** As you can see, the MAC Address of the second entry (the one I just made) has been dynamically replaced by the calculated MAC Address corresponding to my IP Address... Calculation is done as follow (and displayed in hexa): UU=(xxx-128) VV=yyy WW=zzz But I don't want that behavior. My IP address and MAC address cannot be changed, and I must associate them accurately. Does anybody know how to disable MAC address substitution/calculation in netsh? Thanks, Olivier.

  Read the article

• script to run sox to combine multiple mono tracks to stereo

  - by Ze'ev

  I have a folder full of .wav audio files. Some are stereo, most are mono splits. The mono split pairs are all named foo bar track.L.wav and foo bar track.R.wav I can use the command line tool sox to combine a mono pair into 1 stereo track like this: sox -M track1.L.wav track1.R.wav track1.Stereo.wav where the first 2 files are the mono pairs, and the third is the output stereo file. This is great, but I'd like to have a script that will automatically find all the mono pairs and combine them into stereo files. I.e., I need it to find all files which have the same name except for the .L. and .R. before the extension, and run sox on them, outputting to a new file with the same name without the L/R suffix. For example, if my folder contains these files: track1.L.wav track2.L.wav track3.L.wav track4.L.wav track1.R.wav track2.R.wav track3.R.wav track4.R.wav track6.wav track7.wav I need to run these commands: sox -M track1.L.wav track1.R.wav track1.Stereo.wav sox -M track2.L.wav track2.R.wav track2.Stereo.wav sox -M track3.L.wav track3.R.wav track3.Stereo.wav sox -M track4.L.wav track4.R.wav track4.Stereo.wav Here's where I am so far: for file in ./*.L.wav; do file2=`echo $file | sed 's_\(.*\).L.wav_\1.R.wav_'`; out=`echo $file | sed 's_\(.*\).L.wav_\1.STEREO.wav_'`; echo $file - $file2 - $out; done That works, but when I replace the echo line with sox -M $file $file2 $out; it doesn't work; spaces in the filenames cause it to fail.

  Read the article

• Software for monitoring/measuring GPU temperature (WinXP/7)

  - by Isxek

  Are there currently any programs available for monitoring/measuring GPU temperature? Something preferably free, and for either Windows XP and Windows 7. Thanks in advance!

  Read the article

• Thunderbird "undo send" feature (like in Gmail)?

  - by josh

  I was wondering if there exists a thunderbird addon that gives similar functionality as Google's "undo send" feature? This basically just delays the sent message for a few seconds allowing the user to cancel the send if desired. I find this very useful in Gmail and would love the option now that I started using thunderbird. I've seen the send later addon, but this isn't really what I want. I want something very similar to Google's feature where it automatically delays each message before sending with an easy to access option to cancel the send. Thanks!

  Read the article

• External USB attached drive works in Windows XP but not in Windows 7. How to fix?

  - by irrational John

  Earlier this week I purchased this "N52300 EZQuest Pro" external hard drive enclosure from here. I can connect the enclosure using USB 2.0 and access the files in both NTFS partitions on the MBR partitioned drive when I use either Windows XP (SP3) or Mac OS X 10.6. So it works as expected in XP & Snow Leopard. However, the enclosure does not work in Windows 7 (Home Premium) either 64-bit or 32-bit or in Ubuntu 10.04 (kernel 2.6.32-23-generic). I'm thinking this must be a Windows 7 driver problem because the enclosure works in XP & Snow Leopard. I do know that no special drivers are required to use this enclosure. It is supported using the USB mass storage drivers included with XP and OS X. It should also work fine using the mass storage support in Windows 7, no? FWIW, I have also tried using 32-bit Windows 7 on both my desktop, a Gigabyte GA-965P-DS3 with a Pentium Dual-Core E6500 @ 2.93GHz, and on my early 2008 MacBook. I see the same failure in both cases that I see with 64-bit Windows 7. So it doesn't appear to be specific to one hardware platform. I'm hoping someone out there can help me either get the enclosure to work in Windows 7 or convince me that the enclosure hardware is bad and should be RMAed. At the moment though an RMA seems pointless since this appears to be a (Windows 7) device driver problem. I have tried to track down any updates to the mass storage drivers included with Windows 7 but have so far come up empty. Heck, I can't even figure out how to place a bug report with Microsoft since apparently the grace period for Windows 7 email support is only a few months. I came across a link to some USB troubleshooting steps in another question. I haven't had a chance to look over the suggestions on that site or try them yet. Maybe tomorrow if I have time ... ;-) I'll finish up with some more details about the problem. When I connect the enclosure using USB to Windows 7 at first it appears everything worked. Windows detects the drive and installs a driver for it. Looking in Device Manager there is an entry under the Hard Drives section with the title, Hitachi HDT721010SLA360 USB Device. When you open Windows Disk Management the first time after the enclosure has been attached the drive appears as "Not initialize" and I'm prompted to initialize it. This is bogus. After all, the drive worked fine in XP so I know it has already been initialized, partitioned, and formatted. So of course I never try to initialize it "again". (It's a 1 GB drive and I don't want to lose the data on it). Except for this first time, the drive never shows up in Disk Management again unless I uninstall the Hitachi HDT721010SLA360 USB Device entry under Hard Drives, unplug, and then replug the enclosure. If I do that then the process in the previous paragraph repeats. In Ubuntu the enclosure never shows up at all at the file system level. Below are an excerpt from kern.log and an excerpt from the result of lsusb -v after attaching the enclosure. It appears that Ubuntu at first recongnizes the enclosure and is attempting to attach it, but encounters errors which prevent it from doing so. Unfortunately, I don't know whether any of this info is useful or not. excerpt from kern.log [ 2684.240015] usb 1-2: new high speed USB device using ehci_hcd and address 22 [ 2684.393618] usb 1-2: configuration #1 chosen from 1 choice [ 2684.395399] scsi17 : SCSI emulation for USB Mass Storage devices [ 2684.395570] usb-storage: device found at 22 [ 2684.395572] usb-storage: waiting for device to settle before scanning [ 2689.390412] usb-storage: device scan complete [ 2689.390894] scsi 17:0:0:0: Direct-Access Hitachi HDT721010SLA360 ST6O PQ: 0 ANSI: 4 [ 2689.392237] sd 17:0:0:0: Attached scsi generic sg7 type 0 [ 2689.395269] sd 17:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2689.395632] sd 17:0:0:0: [sde] Write Protect is off [ 2689.395636] sd 17:0:0:0: [sde] Mode Sense: 11 00 00 00 [ 2689.395639] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412003] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412009] sde: sde1 sde2 [ 2689.455759] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.455765] sd 17:0:0:0: [sde] Attached SCSI disk [ 2692.620017] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2707.740014] usb 1-2: device descriptor read/64, error -110 [ 2722.970103] usb 1-2: device descriptor read/64, error -110 [ 2723.200027] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2738.320019] usb 1-2: device descriptor read/64, error -110 [ 2753.550024] usb 1-2: device descriptor read/64, error -110 [ 2753.780020] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2758.810147] usb 1-2: device descriptor read/8, error -110 [ 2763.940142] usb 1-2: device descriptor read/8, error -110 [ 2764.170014] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2769.200141] usb 1-2: device descriptor read/8, error -110 [ 2774.330137] usb 1-2: device descriptor read/8, error -110 [ 2774.440069] usb 1-2: USB disconnect, address 22 [ 2774.440503] sd 17:0:0:0: Device offlined - not ready after error recovery [ 2774.590023] usb 1-2: new high speed USB device using ehci_hcd and address 23 [ 2789.710020] usb 1-2: device descriptor read/64, error -110 [ 2804.940020] usb 1-2: device descriptor read/64, error -110 [ 2805.170026] usb 1-2: new high speed USB device using ehci_hcd and address 24 [ 2820.290019] usb 1-2: device descriptor read/64, error -110 [ 2835.520027] usb 1-2: device descriptor read/64, error -110 [ 2835.750018] usb 1-2: new high speed USB device using ehci_hcd and address 25 [ 2840.780085] usb 1-2: device descriptor read/8, error -110 [ 2845.910079] usb 1-2: device descriptor read/8, error -110 [ 2846.140023] usb 1-2: new high speed USB device using ehci_hcd and address 26 [ 2851.170112] usb 1-2: device descriptor read/8, error -110 [ 2856.300077] usb 1-2: device descriptor read/8, error -110 [ 2856.410027] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2856.730033] usb 3-2: new full speed USB device using uhci_hcd and address 11 [ 2871.850017] usb 3-2: device descriptor read/64, error -110 [ 2887.080014] usb 3-2: device descriptor read/64, error -110 [ 2887.310011] usb 3-2: new full speed USB device using uhci_hcd and address 12 [ 2902.430021] usb 3-2: device descriptor read/64, error -110 [ 2917.660013] usb 3-2: device descriptor read/64, error -110 [ 2917.890016] usb 3-2: new full speed USB device using uhci_hcd and address 13 [ 2922.911623] usb 3-2: device descriptor read/8, error -110 [ 2928.051753] usb 3-2: device descriptor read/8, error -110 [ 2928.280013] usb 3-2: new full speed USB device using uhci_hcd and address 14 [ 2933.301876] usb 3-2: device descriptor read/8, error -110 [ 2938.431993] usb 3-2: device descriptor read/8, error -110 [ 2938.540073] hub 3-0:1.0: unable to enumerate USB device on port 2 excerpt from lsusb -v Bus 001 Device 017: ID 0dc4:0000 Macpower Peripherals, Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0dc4 Macpower Peripherals, Ltd idProduct 0x0000 bcdDevice 0.01 iManufacturer 1 EZ QUEST iProduct 2 USB Mass Storage iSerial 3 220417 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 5 Config0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 4 Interface0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Update: Results using Firewire to connect. Today I recieved a 1394b 9 pin to 1394a 6 pin cable which allowed me to connect the "EZQuest Pro" via Firewire. Everything works. When I use Firewire I can connect whether I'm using Windows 7 or Ubuntu 10.04. I even tried booting my Gigabyte desktop as an OS X 10.6.3 Hackintosh and it worked there as well. (Though if I recall correctly, it also worked when using USB 2.0 and booting OS X on the desktop. Certainly it works with USB 2.0 and my MacBook.) I believe the firmware on the device is at the latest level available, v1.07. I base this on the excerpt below from the OS X System Profiler which shows Firmware Revision: 0x107. Bottom line: It's nice that the enclosure is actually usable when I connect with Firewire. But I am still searching for an answer as to why it does not work correctly when using USB 2.0 in Windows 7 (and Ubuntu ... but really Windows 7 is my biggest concern). OXFORD IDE Device 1: Manufacturer: EZ QUEST Model: 0x0 GUID: 0x1D202E0220417 Maximum Speed: Up to 800 Mb/sec Connection Speed: Up to 400 Mb/sec Sub-units: OXFORD IDE Device 1 Unit: Unit Software Version: 0x10483 Unit Spec ID: 0x609E Firmware Revision: 0x107 Product Revision Level: ST6O Sub-units: OXFORD IDE Device 1 SBP-LUN: Capacity: 1 TB (1,000,204,886,016 bytes) Removable Media: Yes BSD Name: disk3 Partition Map Type: MBR (Master Boot Record) S.M.A.R.T. status: Not Supported

  Read the article

• Can't add a network printer - Windows 7

  - by r0ca

  Hi all, I have an HP 2600n installed on a SBS2003 server. This printer works fine when I print from the server itself and also from my Windows 7 computer #1. From my Windows 7 #2, it doesn't work. I get the error message that I need to install the driver. The error message is in french but here it the translation. No drivers has been found Windows is unable to find a driver for HP Color Laserjet 2600n on the network. To find a driver manually, click ok. If not, click on cancel and contact your sys adm. I reinstalled from scratch the printer, deleted the driver... Still no luck Any takers?

  Read the article

• Add Network Printer drivers in Windows 7/Server 2008 R2?

  - by Matias Nino

  I'm running a 64 bit Windows 7 / Windows 2008 R2 workstation that I just installed. I need to add a printer that is shared on the network from a 32bit Windows 2000 print server. This is an HP LaserJet 5Si printer, the drivers for which HP tells me are automatically built into Windows 7/R2. However, whenever I connect to the printer or try to add it, I get the following screen: Upon clicking OK, I get this screen asking me to locate the driver: How can I possibly locate a driver that is SUPPOSED TO BE NATIVELY SUPPORTED on Windows 7/R2? The tough part is that this printer is one of many shared on a server and does not have a direct IP address. Even worse: I have no access to the print server so I cannot put the 64 bit drivers on there. Any ideas? UPDATE: HP doesn't make a Vista driver either. It claims it is natively supported by Vista and 7, which is true because I am able to create a local printer on a fake tcp/ip port and Windows lets me pick the proper driver. However, when adding from the network, Windows does not let me select a driver and demands an INF. I tried searching the entire sub-structure of the C:\Windows directory and could not find any INF files that contain HP information. The INF might be located somewhere in the Windows installation DVD, but all the files on the DVD are compressed and unrecognizable. UPDATE #2 I installed the proper printer driver as a local printer (with no printer attached) and it installed. However, this did not change the fact that it STILL asks me to provide drivers when connecting to the networked printer.

  Read the article

• Typing lag in WinXP

  - by Ssvarc

  I'm working on a Dell Vostro 1000 laptop that has a mysterious lag in typing. You enter keystrokes and it takes a while to show up on the screen. WinXP Pro was freshly installed and the behavior is still here. Here is the weird part... I've tested the computer with the full Dell diagnostic suite, Prime95 (using UBCD4Win), and Memtest86. Everything checks out as fine. If I run a LiveCD such as UBCD4Win or Ubuntu (9.04?) then there is no typing issue. This is causing me lots of aggravation. Thoughts?

  Read the article

• Why does limiting my virtual memory to 512MB with ulimit -v crash the JVM?

  - by Narinder Kumar

  I am trying to enforce maximum memory a program can consume on a Unix system. I thought ulimit -v should do the trick. Here is a sample Java program I have written for testing : import java.util.*; import java.io.*; public class EatMem { public static void main(String[] args) throws IOException, InterruptedException { System.out.println("Starting up..."); System.out.println("Allocating 128 MB of Memory"); List<byte[]> list = new LinkedList<byte[]>(); list.add(new byte[134217728]); //128 MB System.out.println("Done...."); } } By default, my ulimit settings are (output of ulimit -a) : core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 31398 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 31398 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited When I execute my java program (java EatMem), it executes without any problems. Now I try to limit max memory available to any program launched in the current shell to 512MB by launching the following command : ulimit -v 524288 ulimit -a output shows the limit to be set correctly (I suppose): core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 31398 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 31398 virtual memory (kbytes, -v) 524288 file locks (-x) unlimited If I now try to execute my java program, it gives me the following error: Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. Ideally it should not happen as my Java program is only taking around 128MB of memory which is well within my specified ulimit parameters. If I change the arguments to my Java program as below: java -Xmx256m EatMem The program again works fine. While trying to give more memory than limited by ulimit like : java -Xmx800m EatMem results in expected error. Why the program fails to execute in the first case after setting ulimit ? I have tried the above test on Ubuntu 11.10 and 12.0.4 with Java 1.6 and Java 7

  Read the article

• BOOTMGR is compressed

  - by JavaAndCSharp

  So I've just finished messing up my computer beyond repair. I originally had a Windows 7 install on my 64GB SSD and all my data on my 1.5TB HDD. So I decided to install Windows 8 Consumer Preview. I tried to clone my 64GB SSD onto my HDD; but that didn't work either at first. I later learned that it wiped all my data off of it. Thank goodness for the cloud. So I retried the cloning after I realized that my data was gone, and I finished it. So I rebooted and got a cryptic error message: BOOTMGR is compressed. Press Ctrl+Alt+Del to restart. So I did. Several times. I followed the instructions to rebuild the bootmanager from many websites, including HowToGeek, smallvoid.com, and more. None worked. BTW, I've lost my Windows 7 Professional DVDs. All I have is my Windows 7 Home Premium DVD. It's the one I got with my laptop. How can I get back to a working computer? I'm willing to wipe anything, as my data is all in the cloud.

  Read the article

< Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >