something broken - Page 15

Sharepoint (WSS 3.0) on SBS 2008 broken.

- by tcv

I recently ran the Sharepoint Products and Technologies Wizard. I had hoped this would bring up Sharepoint and allow me to access it so I could begin to learn. But it's not working. Here is some data that I hope is relevant. I am doing all my testing on the SBS 2008 server itself. I changed the hostheader in IIS to reflect an external FQDN I plan to deploy. The SBS server is remote and there are no domain-connected workstations. If I browse "localhost" SSL, I can get to the site, albeit with a self-signed cert warning. If I attempt to connect via SSL using either the internal FQDN (.local), the External FQDN (.net) or any other permutation thereof, I am prompted for credentials three times but am not allowed access. My account is a domain admin. The site is inaccessible using port 80 whether using localhost, internal FQDN (.local), and external FQDN (.net) Right now, I suspect my problem is within IIS, but I don't know. My plan to publish the sharepoint site to the web so my partner and I can check documents in/out. Can someone help me get started in current direction?

Read the article

Some guest networking and VMware Tools functionality broken with Sprint SmartView on the host

- by Mads

Using VMware Workstation 6.5.3 on Vista 64-bit. I started having problems with VMware networking about 6 months ago after upgrades to Sprint SmartView. I did not have problems previously, but I don't know if that is because I was lucky. The main symptoms of the problem when SmartView is installed are: I can no longer drag files from the host to copy them to the guest. When they are dragged, the disallowed cursor (the circle with a slash) shows in the guest. If I try to enable shared folders in the guest while it is running, I will not be able to see the shared files and will be informed that networking is not working. I can still ping guests from the host and I can still access network services via NAT most of the time when connected via my USB broadband adapter. When I configure shared folders so they are "always enabled" (with a mapped drive), I can access files on the via the mapped folders. I can also copy the file on the host and then paste it in the guest, as was suggested in some other threads concerning drag-and-drop problems that I found. The VMware Tools icon is showing in all cases and I don't see any obvious errors in the host's event viewer. If I uninstall SmartView, the problems disappear. If SmartView (current version is 2.28.0082) is reinstalled I will experience the same problems. I have tried uninstalling/reinstalling VMware and SmartView in various ways but it appears tha these problems are consistent when SmartView is installed (not just when it is running or connected, but when it is present on the system). I'm wondering if this is a combination of software (WS 6.5.3, Vista64, and SmartView) that works for other people, which would indicate a problem that is peculiar to my configuration.

Read the article

Are memory leaks really something to worry about?

- by chuck final

I came across this post today, arguably debatable/wrong somewhat, but worth a shot looking over: http://andyharglesiscodebase.wordpress.com/2013/11/01/why-programmers-shouldnt-worry-about-memory-leaks/ The poster claims that modern OSes automatically have garbage collection implemented in the kernel memory, and that any unfreed user heap memory is managed during "post partum cleanup". It seems like rubbish, but I can't be 100% sure since I am not that knowledgeable on the kernel's memory management setup, etc.

Read the article

Windows Server 2008 Migration - Did I miss something?

- by DevNULL

I'm running in to a few complications in my migration process. My main role has been a Linux / Sun administrator for 15 yrs so Windows server 2008 environment is a bit new to me, but understandable. Here's our situation and reason for migrating... We have a group of developers that develop VERY low-level software in Visual C with some inline assembler. All the workstations were separate from each other which cased consistency problems with development libraries, versions, etc... Our goal was to throw them all on to a Windows domain were we can control workstation installations, hot fixes (which can cause enormous problems), software versions, etc... All Development Workstations are running Windows XP x32 (sp3) and x64 (sp2) I running in to user permission problems and I was wondering maybe I missed one, tWO or a handful of things during my deployment. Here is what I have currently done: Installed and Activated Windows Server 2008 Added Roles for DNS and Active Directory Configured DNS with WINS for netbios name usage Added developers to AD and mapped their shared folders to their profile Added roles for IIS7 and configured the developers SVN Installed MySQL Enterprise Edition for development usage Not having a firm understanding of Group Policy I haven't delved deeply in to that realm yet. Problems I'm encountering: 1. When I configure any XP workstations to logon our domain, once a user uses their new AD login, everything goes well, except they have very restrictive permissions. (Eg: If a user opens any existing file, they don't have write access, except in their documents folder.) Since these guys are working on low system level events, they need to r/w all files. All I'm looking to restrict in software installations. Am I correct to assume that I can use WSUS to maintain the domains hot fixes and updates pushed to the workstations? I need to map a centralized shared development drive upon the users login. This is open to EVERYONE. Right now I have the users folders mapped upon login through their AD profile. But how do I map a share if I've already defined one within their profile in AD? Any responses would be very grateful. Do I have to configure and define a group policy for the domain users? Can I use Volume Mirroring to mirror / sync two drives on two separate servers or should I just script a rsync or MS Synctool? The drives simply store nightly system images.

Read the article

SSH broken, segfault error 4

- by trampi

i cannot connect to my server via ssh, it throws me a "server unexpectedly closed connection" after entering the password. in var/log/messages the only noteable message is: Apr 14 17:41:23 s15410270 kernel: sshd[3602]: segfault at c0 ip 7f0801acbdb0 sp 7fff0adff860 error 4 in libc-2.8.so[7f0801a87000+14f000] Apr 14 17:41:29 s15410270 kernel: sshd[3606]: segfault at c0 ip 7f75f9463db0 sp 7fff027971f0 error 4 in libc-2.8.so[7f75f941f000+14f000] This message appears after a log in attempt via ssh or via sftp Its a SuSE Linux server. I'm looking for help where to start to search for the error, i can still act as root via a serial console. edit: "server unexpectedly closed connection" only appears if i enter the correct password!

Read the article

nginx serves broken characters (nginx on linux as guest system in vbox)

- by Andrew123321

I have nginx 1.2.0-1 on debian 6.0.5. I have file test.css. I fill it with "abcd1234". Open it in browser. Then I change the content to "mnop". I receive "abcd" in response. I have all the files in folder shared between Windows (host) and Debian (guest) using Virtual Box. When I put the file elsewhere the problem does not occur! Any idea what can cause this? Thank you (I've been editing question as I was discovering the problem)

Read the article

Broken Python installation on CentOS 5.8

- by Beckett

I already searched for solution to my problem via Google and stackoverflow's search facility, but haven't found anything related specifically to it. Here's the problem: I needed python 2.7.3 on CentOS 5.8 machine which has only python 2.4.3 preinstalled. Also neither there's the suitable version in it's repositories nor I can upgrade installed version. That's why I decided to build python from source code. But I've made a mistake: instead of make altinstall I did make install thus changing default version of the current installation. It was before I found this article - How to install Python 2.7.3 on CentOS 6.2 . I guess 5.8 and 6.2 versions aren't different to the extent this article is inapplicable. After installation of new python version I installed pip, but once I tried to invoke it, I got "No module named pkg_resources" error. In order to solve this issue I installed setuptools from repository. But it had only led to another error: "Distribution Not Found". My final step was to follow the guide I posted the link to, but I was unable to perform last step: easy_install-2.7 virtualenv command threw "-bash: /usr/local/bin/easy_install-2.7: .: bad interpreter: Permission denied" error. Now when I try to invoke pip or pip-2.7 both commands raise the same error with different names of binaries after "-bash:". Is there any way to fix this problem, so I could install new python version (2.7.3) alongside with the preinstalled one (2.4.3) according to the guide? Any help will be appreciated. P.S.: yum is working fine, although it needs python to function, so I hope the damage I unknowingly caused isn't very severe. Also I'm not a native English speaker, so I apologize for possible occasional grammatical and/or spelling errors.

Read the article

ms excel find and replace @ symbol results in broken formula

- by Loopo

I'm trying to search and replace in excel, the column is formatted as 'Text'. Find: [@ replace with: @ Whenever this finds a match at the start of a cell i.e the cell contents start with [@ and tries to replace that with @ the result is an error 'This function is not valid' I guess that since the @ operator is for references, this is causing the cell to be interpreted differently (not as text anymore) How do I make this replacement work? Copy/paste into another program is not a good option because some of the cells contain line-breaks.

Read the article

OpenLDAP with StartTLS broken on Debian Lennny

- by mr.zog

I'm trying to get OpenLDAP on Lenny to work with StartTLS. I have a Fedora 13 machine which I'm using as a client for testing. So far the Fedora client is ignoring the 'host' directive in /etc/ldap.conf when I try to connect using ldapsearch. The client wants to connect to 127.0.0.1:389 even if I specify -H ldaps://server.name on when using ldapsearch. /etc/ldap.conf on the client machine is in mode 444. But even when I try connecting locally from an ssh session, I see errors like this: ldap_sasl_interactive_bind_s: Can't contact LDAP server (-1) Someone hit me with a cluebat, plz. Update: you must use ~/.ldaprc for settings such as 'host'.

Read the article

Outlook Signature Broken in Entourage

- by Eric J.

Some of our company uses Windows with Outlook 2010, and the rest use Mac with Entourage. When our standard signature line is included in an email that goes to Entourage, the result does not display correctly. It appears that Entourage is mangling the HTML. My working theory is that Entourage encounters inline CSS styles it does not know about and stops processing styles, but I'm really not sure. Question: How can I enter a signature into Outlook 2010 that will render correctly in Entourage? For example, can I specify somehow the exact HTML to use? Here's an example of how the HTML is being changed. Original on Outlook, as received by another Outlook client: My Company 123 Main St. Suite 100 Note the use of spans, color #1785C5 and color #666666. Same original email, as displayed in an Entourage client: My Company 123 Main St Suite 100 Note the use of br tags rather than spans, and the color #656565.

Read the article

Bots see something different!?

- by ilhan

I've submitted my web site to different apps like YahooWebmasters and similar places. They see my web site's main page's title as Indef of/ . However I see it normally, as My Title. Server: it says Apashi (wtf!?), it is Apache in reality PHP 5.2.5 FreeBSD cPanel Version 11.24.4-RELEASE Kernel version 6.3-PRERELEASE main page: index.html I guess it is because of index.html But why?

Read the article

PowerShell 3.0 x64 bit broken after installing KB2506143

- by Dave Parker

I have searched using all kinds of variations on relevant terms and I cannot find a single other instance of someone else having this excact same problem, so I am hoping someone here may have a clue. Problem I installed Windows Management Framework 3.0 (KB2506143) by downloading and running Windows6.1-KB2506143-x64.msu from Microsoft.com. Once completed I rebooted my machine as requested. After rebooting and logging in, I try to run the 64-bit PowerShell command shell and it comes up for a second then goes away. The 32-bit shell seems to work fine, it is just the 64-bit one that fails. Looking in the Fusion logs, I found: *** Assembly Binder Log Entry (10/4/2012 @ 1:51:48 PM) *** The operation failed. Bind result: hr = 0x80070002. The system cannot find the file specified. Assembly manager loaded from: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\mscorwks.dll Running under executable C:\WINDOWS\system32\WindowsPowerShell\v1.0\powershell.exe --- A detailed error log follows. === Pre-bind state information === LOG: User = ********\***** LOG: DisplayName = Microsoft.PowerShell.ConsoleHost, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL <remainder omitted> GacUtil reveals that there is a Microsoft.PowerShell.ConsoleHost, Version=1.0.0.0, but not 3.0.0.0. I tried uninstalling KB2506143 (which removed MSVCRT90.dll and caused Windows Live Messenger to fail on load after rebooting again, so I ran a repair in stall on Windows Live Essentials and that fixed the Messenger problem) and then re-installing it, but nothing changed. If it helps, here are what I think may be the relevant parts of my hardware/software environment. Environment Dell Latitude E6510, 8GB RAM Windows 7 Professional 64-bit with SP1 Visual Studio 2010 Professional installed (includes .NET 4.0) Visual Studio 2012 Professional installed Microsoft Forefront Client Security Any clues out there? Thanks, Dave

Read the article

Exchange 2010 CAS Removal == Broken???

- by Doug

Hi there, I recently upgraded to exchange 2010 and have a setup with 2 of my servers running CAS roles - EXCH01, EXCH02 EXCH02 just happens to also have a mailbox role where a lot of the users sit EXCH01 is my front facing CAS server, and is facing the net with SSL etc and incoming mail moving through it as a hub transport layer server as well. As i was trying to lean things out in my VM environment i removed the CAS role from EXCH02 and all hell broke loose. All the mail users that have a mailbox on EXCH02 had their homeMTA set to a deleted items folder in AD and so did their msExchHomeServer properties. After a complete battle i manually fixed these issues to the oldvalues, and in the mean time reinstalled CAS on EXCH02 (management was going nuts with out OUTLOOK working so i just put things back the way they were in a hurry.) I must add as a strange thing on the side, that before i reset these to point at EXCH02 i tried EXCH01 and it failed. I still want to remove the CAS role from EXCH02 as it should really not have it (error on install/planning on my part) and would have thought that this would not cause the issues it did, i assumed that the fact that there was another CAS server in the admin group all would be good. Was i wrong in my assumption? and what can i do to complete this successfully the second time round? Do i need to rehome all the mailboxes to the CAS server? is this a bug in the role uninstall?

Read the article

broken partition possible for recovery?

- by claw

I was using copywipe on hirens boot cd to copy a Windows installation to a new drive. unfortunately for me, I was rushing, I set the source drive as the USB drive running hiren/copywipe to the Windows partition, I think it has destroyed the partition tables and replaced with hiren boot USB ones. disk: was NTFS 40 / 250 partitions disk: now FAT32 145 / 145 partition I have used several partition recovery tools, diskdigger to name one, they all show a recovered partition, but its the hiren stuff. any advice would be a fantastic help To all that have similar issues I recommend using TestDisk (undelete partition) software. you can get this software as part of hirens boot cd. see answer

Read the article

apt-get erroring because of a broken package

- by MegaEduX

Everytime I run apt-get install or update on my server I get the following error: (May not be exactly this because I am translating from portuguese) An error was found when processing: netatalk E: Sub-process /usr/bin/dpkg returned an error code (1) I am not trying to install that package. This error appeared when I tried to install that package, which failed to install, and it won't disappear. This doesn't prevent me from installing other packages. It installs them, just gives this error at the end.

Read the article

recovering a broken GNOME-desktop in debian wheezy

- by morgon

an hour ago I had a working gnome-desktop on my debian system (thinkpad x121e). Then I installed compiz that crashed. After a reboot the gnome-desktop no longer started. Then I did some upgrades with aptitude, all gnome-packages seem to be there, but it is still not working. On startup I get a login-dialog, when I login there is no desktop, only some window-manager running that allows me to start a terminal. When I run "gnome-session" I get the error message "failed to load session "gnome". So how do I get back to a working desktop? I have tried "tasksel install gnome-desktop --new-install" but that just displays a progress window that after half an hour still shows 0%. Can someone help me please? I have tried "

Read the article

Looking for something like Google's Picasa [closed]

- by Skizz

I almost like Picasa, but there are two issues that irk me and I wondered if anyone knew of an application that does what Picasa does but without the following problems: Network drives. Picasa is hopeless with network drives. Ideally, I'd like photos to be stored remotely and thumbnail databases to be stored locally with a client-server set-up to update client databases. The main aim is to get updates propagated to clients efficently, reduce network bandwidth and have quick browsing on the client. It needs to be snappy when used over a wireless network. This is just a minor point but the folder view looks awful, especially when it uses those tiny thumbnails. (Also, what is it with folders being drawn vertically. Having spent years looking at folders orientated horizontally, turning them on their side looks so wrong.)

Read the article

ubuntu 9.04 pptp broken after a power failure

- by kevin42

I have a small Ubuntu 9.04 router setup as a NAT box and a PPTP server. After a power failure everything except the PPTP server still works. A windows client gets to "registering your computer on the network" but then says Error 742: The remote computer does not support the required data encryption type. I did some research and I think the problem is with the ppp_mppe module. When I try to run 'modprobe ppp_mppe' it hangs indefinitely. What would cause this hang? Any ideas how I can troubleshoot this further? Thanks for the help! UPDATE: I am still having the problem, however I have found some more information. When the first user tries to connect to pptp, the process list shows modprobe sha1 running, and one instance of modprobe ppp_mppe for each connection attempt. If I killall modprobe at this point the next connection attempt works, and everything is fine until the next reboot. I'm planning to do a clean install at some point in the future but I'd really like to get to the real cause of this.

Read the article

Restarted computer, now wireless and Visual Studio is broken

- by Earlz

I installed the new update for TortoiseSVN which requires a restart. Upon restarting a lot of things broke. I'm currently running a virus scan, but what would cause this? Among the things that no longer work is Visual Studio. It now says "Invalid License Data. A reinstall is required" and my wireless internet does not work. When I go to connect to my network it will say "Can not connect" and then when I diagnose the problem it says "The connection to accesspoint-name was cancelled" (and yes, canceled is misspelt like that) What could have caused this? My computer did not install any updates or anything like that upon restarting and it was running fine before I restarted it.

Read the article

Mac updated just now, postgres now broken

- by user52224

I run postgres 9.1 / ruby 1.9.2 / rails 3.1.0 on a maxbook air for local dev. It's all been running smoothly for months, (though this is the first time I've done development on a mac.) It's a macbook air from last year, and today I got the mac osx software update message as I have a few times before, and my system downloaded approx 450mb of updates and restarted. It now says it's on OSX 10.7.3. Point is, postgres has stopped working, when I start my thin server (mirror heroku cedar) as normal, and then browse to my rails app I get: PG::Error could not connect to server: Permission denied Is the server running locally and accepting connections on Unix domain socket "/var/pgsql_socket/.s.PGSQL.5432"? What happened? After browsing around a few questions I'm still confused, but here's some extra info: Running psql from command line gives same error I can run pgadmin 3 and connect via it and run SQL no problems Running which psql shows the version as /usr/bin/psql I created a PostgreSQL user back when I got the mac (it's always been on lion) I've no idea why, almost certainly I was following a tutorial which I neglected to store in my notes. Point is I am aware there is a _postgres user as well. I know it's rubbish, but apart from a note on passwords, I don't have any extra info on how I configured postgres - though the obvious implication is that I did not use the _postgres user. Anyone have suggestions or information on what might have changed / what I can try to debug and fix? Thanks. Edit: Playing around based on this question and answer: http://stackoverflow.com/questions/7975414/check-status-of-postgresql-server-mac-os-x, see this string of commands: $ sudo su postgreSQL bash-3.2$ /Library/PostgreSQL/9.1/bin/pg_ctl start -D /Library/PostgreSQL/9.1/data pg_ctl: another server might be running; trying to start server anyway server starting bash-3.2$ 2012-04-08 19:03:39 GMT FATAL: lock file "postmaster.pid" already exists 2012-04-08 19:03:39 GMT HINT: Is another postmaster (PID 68) running in data directory "/Library/PostgreSQL/9.1/data"? bash-3.2$ exit

Read the article

Recovering mail from hardrive (broken os).

- by Maciek Sawicki

Hi, Friend of mine broke his Windows (doesn't boot). I will probably have to reinstall OS. I want to mount his hard drive in my OS to beck up some important files. He sad he uses Outlook express, but he Use Vista so I'm not sure it's Vistas Mail Client or Outlook. What files I have to copy to backup mail and adders book from Outlook, Outlook Express and Windows Mail? Is it any good program for doing it automatically (for Linux or Windows)? If there are tools or special procedures for other mail clients (for example Thunderbird) you can also name them to make this question more generic.

Read the article

RDP add domain users broken

- by Robuust

I have 3 servers, - domain controller with dns services - dhcp/rras - file/random server with files stored on it and nothing special so far. All servers have static IP's All servers are in the same domain (SOFTWARE) RDP is enabled for all 3 servers All servers are Windwos Server 2008 R2 I can connect to the DHCP/RRAS server via RDP I cannot connect to DC and File server When I add RPD users (both are domain admin for testing) to the File server they show up like this: What is happening what I don't see? And additional why don't I even get a login screen for RPD? Thanks in advance.

Read the article

Internet printing : print to iOS gateway -> AirPrint / something -> Laser printers

- by user75129

I've done a bit of research on the Internet, and it looks like I'm on a dead end. My goal is to minimize cost, and be able to send and print documents AUTOMATICALLY (may be 10 or 20 pages per day) to a laser printer in a remote office. The preliminary method is to use: iOS 5.1.1 (JB'ed) with 3G connection, HP (or other brands) printer with AirPrint, iCloud's Documents and may be write some launchd scripts to monitor any new documents in iCloud. May be with other software. I am not sure yet. By using the cloud, I can upload new docs to the cloud anywhere in my city, and the iOS will be able to see them within a reasonable amount of time, then print it. But it seems this combo is not workable. Anyone got any advice on how to make this set up work, or propose other alternatives that requires NO PC or Mac? Currently I have a 3GS with 3G connectivity spare. Need to buy a new printer though.

Read the article

Convert Microsoft Works Database files to something that can be read in Excel

- by Kwang Mark Eleven

I have many .wdb files created with Microsoft Works. I need to open them but I don't have Microsoft Works. Can anybody recommend a utility/converter or procedure to open the files with Excel? Thanks in advance

Read the article

Can you see something wrong in my .htaccess?

- by AlexV

OK, after many search, trial and errors I've managed to create an .htaccess that do what I wanted (see explanations and questions after the code block): <IfModule mod_rewrite.c> RewriteEngine On #1 If the requested file is not url-mapper.php (to avoid .htaccess loop) RewriteCond %{REQUEST_FILENAME} (?<!url-mapper\.php)$ #2 If the requested URI does not end with an extension OR if the URI ends with .php* RewriteCond %{REQUEST_URI} !\.(.*) [OR] RewriteCond %{REQUEST_URI} \.php.*$ [NC] #3 If the requested URI is not in an excluded location RewriteCond %{REQUEST_URI} !^/seo-urls\/(excluded1|excluded2)(/.*)?$ #Then serve the URI via the mapper RewriteRule .* /seo-urls/url-mapper.php?uri=%{REQUEST_URI} [L,QSA] </IfModule> This is what the .htaccess should do: #1 is checking that the file requested is not url-mapper.php (to avoid infinite redirect loops). This file will always be at the root of the domain. #2 the .htaccess must only catch URLs that don't end with an extension (www.foo.com -- catch | www.foo.com/catch-me -- catch | www.foo.com/dont-catch.me -- don't catch) and URLs ending with .php* files (.php, .php4, .php5, .php123...). #3 some directories (and childs) can be excluded from the .htaccess (in this case /seo-urls/excluded1 and /seo-urls/excluded2). Finally the .htaccess feed the mapper with an hidden GET parameter named uri containing the requested uri. Even if I tested and everything works, I want to know if what I do is correct (and if it's the "best" way to do it). I've learned a lot with this "project" but I still consider myself a beginner at .htaccess and regular expressions so I want to triple check it there before putting it in production...

Search Results

Search found 54098 results on 2164 pages for 'something broken'.

Page 15/2164 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22 | Next Page >

- by tcv

- by Mads

- by chuck final

- by DevNULL

- by trampi

- by Andrew123321

- by Beckett

- by Loopo

- by mr.zog

- by Eric J.

- by ilhan

- by Dave Parker

- by Doug

- by claw

- by MegaEduX

- by morgon

- by Skizz

- by kevin42

- by Earlz

- by user52224

- by Maciek Sawicki

- by Robuust

- by user75129

- by Kwang Mark Eleven

- by AlexV

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22 | Next Page >