Search Results

Search found 4374 results on 175 pages for 'computers'.

Page 150/175 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

• Is there a list of Windows services that can be turned off to save resources?

  - by scunliffe

  Every time I open up my task manager and look at the tasks running, it appears to me that there has got to be a bunch of junk running in there that I don't want or need and would be better off turning off (e.g. set the service to manual vs. automatic) In particular I'm running Windows XP, but I'd be interested in services for any version. e.g. Service: ThinkPad PM Service What is it: The ibmpmsvc.exe process is installed by default on IBM Notebook computers. It allows various functions of your IBM notebook to be controlled using the blue Fn keys. If you use the blue Fn keys on your Notebook, you should leave this process running. Otherwise, if it is causing problems for your system you should terminate the ibmpmsvc.exe process. (source) Thus for me, (having never used, or intending to use these buttons) - I want to turn it off. There's lots that just seem painfully unnecessary to me... I'm just not sure which ones I can "safely" stop/disable without issues... "Alerter", "ClipBook", "Messenger", "Telnet", "ATI Hotkey Poller", "Office Source Engine", etc. I'd appreciate any info on services that are truly unnecessary, or only useful to certain people/types of users.

  Read the article

• UDP blocked by Windows XP Firewall when sending to local machine

  - by user36367

  Hi there, I work for a software development company but the issue doesn't seem to be programming-related. Here is my setup: - Windows XP Professional with Service Pack 3, all updated - Program that sends UDP datagrams - Program that receives UDP datagrams - Windows Firewall set to allow inbound UDP datagrams on a specific port (Scope: Subnet) If I send a UDP datagram on any port to other, similar machines, it goes through. If I send the UDP datagram to the same computer running the program that sends (whether using broadcast, localhost IP or the specific IP of the machine), the receiver program gets nothing. I've traced the problem down to the Windows XP Firewall, as Windows 7 does not have this problem (and I do not wish to sully my hands with Vista). If the exception I create for that UDP port in the WinXP firewall is set for a Scope of Subnet the datagram is blocked, but if I set it to All Computers or specifically enter my network settings (192.168.2.161 or 192.168.2.0/255.255.255.0) it works fine. Using different UDP ports makes no difference. I've tried different programs to reproduce this problem (ServerTalk to send and either IP Port Spy or PortPeeker to receive) to make sure it's not our code that's the issue, and those programs' datagrams were blocked as well. Also, that computer only has one network interface, so there are no additional network weirdness. I receive my IP from a DHCP server, so this is a straightforward setup. Given that it doesn't happen in Windows 7 I must assume it's a defect in the Windows XP Firewall, but I'd think someone else would have encountered this problem before. Has anyone encountered anything like this? Any ideas? Thanks in advance!

  Read the article

• Accessing a shared folder in Windows Server 2008 R2.

  - by Triztian

  Hello all, seems my involvement with computers has grown and I've found my self in the need to access a shared folder on a server. I've read some documentation and managed to set up the folder as a share, for this I created a local group and for now just one local user that has access to the share, the folder is in the public user folder and it's permissions should be (and I believe they are) read/write. The problem is that I can't connect from a remote machine I mean I don't know how the way it should be accessed, the server has a public IP and we use it also as a host to our website I don't know if that affects it though, the folder will be used as the "keeper" for the QuickBooks company files and has the database server manager installed. I've tried setting up a VPN Connection to the but no success. The server has a domain name a "http://www.example.com" that redirects to our website, I am unsure if it could be accessed that way, also the share has a location displayed when I right-click properties Heres what I've tried Setting up a VPN Connection (Windows Vista and 7) Got to the point where I got asked for credential and entered the user I created (which is not an admin) but I got a "Connection fail error 800" I suppose this is because in the domain field I entered the servers workgroup. right-click add network connection (Windows 7) Went through the wizard until I reached the point of entering the location, tried many things, the name in the share's properties(\\SOMETHING\Share), the http://www.example.com , the IP address I'm quite unfamiliar with this, so I have my guesses: Since the group and user are local they do not have access to the folder. The firewall in the server is blocking my connection. Anyways, any help and guidence is truly appreciated.

  Read the article

• I deployed Flash Player via a Software Installation policy. How to upgrade?

  - by eleven81

  I have a Windows Server 2008 machine as my DC. Earlier this year I created a Software Installation GPO to deploy Adobe Flash Player plugin MSI. I assigned the policy to the computers, about half run Windows XP x86 and the other half Windows 7 x64. That all works like clockwork. When I created the Software Installation Policy, I disabled the Flash Player plugin's automatic update feature by editing the MSI in Orca. I did this because I wanted all of my machines to run the exact same version of the plugin. Now, some time has passed and a newer version of the Flash Player plugin has been released. It is time for me to push out the updated version of the plugin. I already have the new MSI, but I am lost on what to do next. I see the upgrades tab in the Software Installation GPO, but everything there reads like that would be used for add-ons to a larger master program and not for updates that are released over time. I have read that it is best to create a new Software Installation policy with the new MSI, revoke the old GPO, and assign the new GPO. I feel as though, over time, I will wind up with more revoked policies than active ones. I have also read that some people have had success by replacing the old MSI with the new MSI and simply telling the GPO to redeploy. This seems like a backdoor method that will only get me in to trouble. In short, what is the correct, best-practice, or preferred way to roll out the new version via Group Policy?

  Read the article

• Windows Server 2008 R2 Virtual Network Setup

  - by jpearl01

  Hi all, Some background: I'm very much new to networking in general, and virtualization in particular. I'm trying to set up a series of VMs as we are transitioning to a thin client setup. I have been supplied a limited number of static ip addresses. The server is located in an offsite building which houses the network we use to connect to the internet, share folders etc. The setup I've been trying to go for is this: The host OS (Windows Server 2008 R2) is bound to one nic using one of the static ips (say, Nic1 and ip 10.255.6.61). I've set up another external virtual network attached to another physical nic , and a virtual private network attached to no nic. There is one VM running the same os (as the host). This VM is connected to both the external virtual network (and uses another static ip say Nic2 and ip 10.255.6.62) and also to the virtual private network (I gave it a static random ip 192.168.88.1 subnet mask 255.255.255.0). This virtual private network is connected to all the other VMs. I'd like to share the internet connection with all the other VMs on the private virtual network, and so I installed the RRAS role on the server connected to Nic2, and selected the option to share the internet over the vpn. I've run through the RRAS wizard a few times, trying different configurations, but none of them seem to be letting the other vms connect to the 'net. The vms seem to connect to the virtual private network fine, they are assigned an ip address and everything, but no internet, and no rest of the network either. The other problem is in general I connect to the vms with RDP. Will that be possible with a setup like this? i.e. will the vms show up as computers on the network? If not, what are my other options? Thanks! ~josh

  Read the article

• Simplest DNS solution for remote offices

  - by dunxd

  I look after a bunch of remote offices that connect via VPN - a Cisco ASA 5505 in each office acts as Firewall and VPN end point. Beyond that we keep things as simple as possible in the offices to minimise the support burden. We don't have any kind of server except in offices large enough to justify having someone dedicated to IT. Basically there is the ASA, some computers, a network printer and a switch. One of the problems I am seeing in a lot of offices is that DNS requests looking up hosts inside our network often fail - I'm assuming timeouts due to the offices internet connection (they are all in developing world countries) having some sub-optimal qualities (e.g. high latency caused by VSAT segments, or packet loss. The obvious solution to this is to have some sort of local DNS service that can serve local requests - so I think it would need to do zone transfers from our Microsoft Windows 2008 R2 DNS servers at HQ. However, simply installing Windows Servers in each office is both expensive, and creates a support burden. This got me thinking about pfsense/m0n0wall on embedded devices - those can act as a DNS server, and could be configured at HQ and sent out as just something that needs to be plugged into the network and can then be forgotten about by the staff locally. Maybe there are some alternatives to the ASA 5505 that include some DNS functionality. Has anyone here dealt with the problem, either using some kind of embedded device, or found some other solution? Any gotchas or reasons to avoid what I have suggested?

  Read the article

• Wireless router setup for 1-1 NAT

  - by Carlos

  What I have: A linksys router WAG160N with firmware version 2 A "pool" of 5 external static IP's provided by my ISP 213.xx.xxx.n All the required configuration values for the static IPs such as (Subnet Mask, Gateway and static DNS 1, 2, 3) Current WAN Configuration: Encapsulation: RFC 2364 PPPoA Multiplexing: VC QoS type: UBR DSL modulation: MultiMode What's connected to the network: 1 x Server (That I want to make available to the outside) 5 x Desktops with static internal IP's, such as 192.168.0.xx 2 x Network printers, also with internal static IP's 2 x Laptops 1 x NAS (Network Attached Storage) also on static IP What I want to do: I would like to make the server available from outside the network, for example from your house. The problem is that Im not really sure how to do this. I have tried following the steps on the instruction manual in Linksys but they do not seem to work, once I set it up as shown bellow, I loose internet and all hell breaks loose. Going into further detail, I would prefer if the network is changed as little as possible, by this I mean that all the computers stay networked within eachother and only the server is accessible from the outside the network. What I need HELP with: I have read around that it is possible to set a 1-1 NAT (I know where it is in the menu but have no clue what it does...) so that I can NAT a single public IP directly to a single private IP (in our case the server). But please, How do I do that? Or maybe an alternative?

  Read the article

• Files deleted. What could have happened?

  - by jjfine

  I'm having a weird issue today. I was writing and testing out some simple cgi scripts this morning when I realized that I couldn't run them from one of the other computers on the (windows) network. So I had my network admin come in and take a look at what was going on. A few minutes later a co-worker came in and told me that a bunch of files he was working with as well as a bunch of others (all *.c files) on the network drive got deleted. He also noticed some strange apache_dump_500.log.txt files in the same directories where the files got deleted. The apache_dump_500.log.txt files all look like this: REDIRECT_HTTP_ACCEPT=*/*, image/gif, image/x-xbitmap, image/jpeg REDIRECT_HTTP_USER_AGENT=Mozilla/1.1b2 (X11; I; HP-UX A.09.05 9000/712) REDIRECT_PATH=.:/bin:/usr/local/bin:/etc REDIRECT_QUERY_STRING= REDIRECT_REMOTE_ADDR=<my computer's local ip> REDIRECT_REMOTE_HOST= REDIRECT_SERVER_NAME=<my computer's domain url> REDIRECT_SERVER_PORT= REDIRECT_SERVER_SOFTWARE= REDIRECT_URL=/cgi-bin/trojan.py I looked and I don't have any trojan.py in my cgi-bin folder. And all my apache logs are clean. Windows event logger seems to not have any traces of what happened either. My httpd.conf: http://pastebin.com/Yny2Yh8v I think we've got some kind of virus that added this trojan.py file to my cgi-bin, ran the script, and deleted the script and any traces from the logs. Is this a thing that happens? Any ideas whatsoever would be much appreciated!

  Read the article

• Which Revision Control Software to use for Personal Dropbox?

  - by wag2639

  I want to set up a sync repositiory that would be similar to Dropbox. Goals/Requirements: Free (Open Source very preferable) Linux host (probably Ubuntu) Windows/Mac/Linux clients Potential for multiple users with limited access (optional) Preferable easy, doesn't necessarily need to be automatic Revision control very preferable Basically, I want to be able to use multiple computers, possible with different OS's, and be able to access, use, and sync files across all of them. I also want to have a local copy of the repository for when I'm not connected to the network (as if I'm working on a laptop, I want to keep a local repository to keep revision and merge later with "master" repository). For example, I'm editing a few pictures on my laptop during the day outside of my network, but when I get home, I would like to sync the changes, including incremental changes, with my desktop at home. I would also like my roommates to be able to access and use this repository too but limit access to certain files. For example, I may want to use this to backup financial records but wouldn't want them to have access to those files. I'm a programmer and familiar with SVN but I know that wouldn't be the most appropriate since it doesn't handle binaries well and doesn't keep a local repository. I know better choices exist but I don't really know them well enough to choose the best one.

  Read the article

• Acrobat 9 Pro - shortcut key failure

  - by Rick G

  I create numerous Acrobat PDF files from MS Word documents via Acrobat 9 Pro. I often need to print a single page from an Acrobat PDF file. I normally use the keyboard shortcut Control-P (Print Dialog) and ALT-U (current page). I recently set up a new PC with Windows 7, and this shortcut combination does not work. When I press ALT-U, it moves the highlight to the correct item, but does not select the radio button. If I press the Enter key, then I print the entire document instead of the current page - VERY annoying! It looks like there is an error in the design of the Print dialog for Acrobat. There are two items which have ALT-U as the keyboard shortcut. They are "Current page" in the Print range frame, and "Summarize comments". I have been able to use Control-P (Print Dialog) and ALT-U (current page) with no problems on virtual machines and older computers running Windows XP. Maybe I installed some software on the new PC that is messing up the keyboard shortcut. Is there any way to figure out the culprit - or is this a known problem with Acrobat?

  Read the article

• Synchronising a remote folder with a local one.

  - by Workshop Alex

  I am using a network disk (that's connected to my router by USB) to store several data files. A simple .NET application that I've created is supposed to read and modify these data files. However, some security issues are preventing this application to access these files directly. (Actually, these have been built-in to my application on purpose since it's not going to support NAS disks.) Since this disk is shared with several computers, I just want to have a simple synchronisation method, which will copy the files to a local folder where3 my application can access them. And, once modified, it should send back the modified files to the NAS disk again. I have two options: 1) Build a second application to do my own synchronisation. 2) Find some build-in function inside Windows 7 Ultimate which can do this for me. Option 2 is preferred. Option 1 is something I can do easily, if need be. I don't need third-party tools. (Still, feel free to add some references to good tools, although I won't accept them as answers.) Basically, is this possible with Windows 7 and if so, how?

  Read the article

• XenServer 5.5 running WHS.. trying to add local or network printer/scanner/copier

  - by ProstheticHead

  Hi guys. Just wondering if anyone has prior experience in sharing a multifunction printer across a (mostly windows) network? My situation at the minute is complicated.. I DID have the printer attached directly to a Windows Home Server box and was able to scan to a share and print across the network from my other computers. Compatibility problems have forced me to virtualize WHS on XenServer 5.5... This is actually quite useful because I can now run other things on the same box, but the problem is that now WHS doesn't get direct hardware access so it doesn't see a USB attached PSC... Grrrr! So now I have a choice to make. I've read somewhere that I can buy an add in PCI USB controller and somehow set up a passthrough to one VM at a time. To me, this sound complicated but if it's likely to work reliably I'd prefer this method. I've read about another approach, which I'm not sure about either, but I guess sounds plausible. A Network USB server, (NOT a print server) that can somehow make a USB port accessible across a network. My worry here is that it likely needs some kind of 3rd party software to work.. so not ideal. If there are any other methods you can suggest I'd be happy to hear them... I need your help guys. I'm also in the market for a PCI express SATA controller, nothing flashy, just need up to 8 ports, JBOD and 100% compatability.. Any suggestions? Regards Kevin

  Read the article

• sporadic routing to another website when opening a common url

  - by user226098

  I have a strange problem in our office: Sometimes when opening a url from one of our projects random url in any browser not the right website shows up but some other website. In most of the cases it redirects to google.com with some parameters like https://www.google.de/?gfe_rd=cr&ei=krOOU8_kGcSKswadyYDQBw&gws_rd=ssl or just the ugly google 404 page). But today it remains on the origial url but shows up the the content of http://debug.netdna-cdn.com/. This happens about 1 time a week and for no apparent reason. Even stranger it only occurs on a single pc in the network. It now happens on two different computers in the network. Both use windows 8. The problem cannot be fixed by clearing the browser cache but by rebooting the pc or using ipconfig /flushdns. So I think it has something to do with the dns cache of the machine. But I have no idea what the reason is for this and how i can figure out how to solve it. Any ideas?

  Read the article

• Broad Band LAN connection through existing 6 wire phone line ( no phone connected )

  - by Paul Taylor

  I have an (up to but never achieved ) 10 mb broadband signal coming into my house along the telephone line. The modem then connects the broadband signal via a LAN connection and Wi-Fi signal to my computers and iPad. My workshop desk is 54 yards (approx. 50m) downhill from the modem (part of a separate building) – too far to give a good direct signal. The inside corner of the workshop (by a window) receives a weak signal. I have a disconnected telephone cable consisting of 6 wires going from the house to the workshop. The telephone is no longer used in the workshop - we use our mobile number for business calls. A broad band signal using the cable would not have to share with a phone. What would be the most economic price/efficient way to get the broadband signal to the workshop? I am writing in hope that since the telephone didn't need the six wires, an Ethernet connection might be similar and not need all the eight wires for a LAN connection. In theory could use the telephone wire to pull an Ethernet cable trough the underground pipe but I doubt if the cable would survive the strain. The broad band connection in the workshop does not have to have network facility. My skill level is high enough to do house wiring, plumbing and gas fitting; so given any sound advice and a wiring diagram or instructions I can probably work out the rest myself.

  Read the article

• Setting up virtualbox for outside access

  - by Morgan Green

  I have a computer running a server that my subdomain on my shared hosting account points to. IE subdomain.mydomain.org goes to my home server. Now then; what I'm wanting to do is be able to access my VirtualBox servers through that subdomain and a different port. E.G Ubuntu Virtual Box Server 1 Username:Ubuntuhost1 Password:MyUbuntuHost1 Port:4000 Internal IP: 192.168.1.60 External IP: 24.29.138.45 Ubuntu Virtual Box Server 2 Username:UbuntuHost2 Password:MyUbuntuHost2 Port:4001 Internal IP: 192.168.1.61 External IP: 24.29.138.45 Now I want to be able to access RDP number 1 through Port 4000, but if I access Port 4001 it will connect to the server on port 4001; both using the same subdomain. The next issue is the fact that even though I know what the IP addresses are on the router for the virtualbox hosts through ifconfig it doesn't change the fact that they don't show up on the router. If anyone knows how to configure this to work please help me out because I've been racking my brain to the highest extent I can. Alright; here's an edit to clarify more; Sorry. My ports on the router are edited to forward Port 4000 on Internal IP 192.168.1.63 (My Ubuntu Internal IP address) Now when I go to my Router Home Page my VirtualBox Internal IP Address doesn't show on the attached device listings, so I set up port forwarding anyways to the VirtualBox Internal IP. My end goal is when I connect to mydomain.org and I connect through port 3389 it takes me to my host computers server, but if I put in mydomain.org and go through port 4000 it's going to redirect to my VirtualBox server; Is this even possible? Sorry; I'm trying to clarify the most I think I can I just don't know how else to explain my issue.

  Read the article

• ActiveDirectory user files aren't being shared? [on hold]

  - by Ryan

  I'm taking a class in college and my current project is to setup Active Directory. So I have two VMs, one is Windows Server 2008 R2 and the other is Windows 7. I setup the domain team15.net (this is the FQDN for the forest) on the W2008 server machine. And then I connected the Windows 7 machine to the team15.net domain, and now I can login to the administrator account on the W2008 machine by using TEAM15\Administrator for the username. However, any files that I add in Windows 7 while logged into TEAM15\Administrator are NOT shown in the Windows 2008 machine. Is this normal? It seems like any files I add to this user in the domain only exists for the machine that I'm currently using. Is it possible to change this so all files for all users are synced to all computers in the domain? If not then what are alternatives? I noticed that back in high school we also used domains but there was a shared drive E:\ that you had to store your files because if you put them on in the desktop instead then they would suddenly disappear once you logged out and back in. How can I setup a shared drive? and which computer would provide the storage for this drive?

  Read the article

• Web browsing through SSH tunnel gets stuck/clogged

  - by endolith

  I use tools like Tunnelier to log into my home Tomato router through SSH, and then use it as a proxy for web browsing, tunnel for Remote Desktop/VNC, etc. Most days it works great, but some days every page I try to view gets stuck, like the tunnel is clogged. I load a web page and it seems to be loading, then stops, with the little loading icon spinning and nothing happening. I refresh the page, I reboot the router, I reboot the other computers on my home network and turn off any bandwidth-hogging services on them, I've turned on QoS on the router to prioritize SSH. I don't understand what's getting stuck. Rebooting or disconnecting/reconnecting the SSH tunnel improves responsiveness for a minute, but then it gets clogged again. It also seems to help if I don't do anything on the tunnel for a few minutes, then it will be responsive for a bit and then get clogged again. Trying to open a terminal console from Tunnelier is also unresponsive, so it's not just a web browsing problem. Likewise, connecting to http://192.168.1.1 in the browser (to the router's web config through its own tunnel) is also slow/laggy/halting. The realtime bandwidth reported by the router is nowhere near my DSL connection's limits, though it does show big spikes during the laggy times, and the connection is responsive when it shows low bandwidths. How do I troubleshoot something like this?

  Read the article

• External Storage for 2TB of backups and 4TB of data RAID level? HW vs Software?

  - by Jerry Mayers

  I have a Mac Mini set up as a media center/file server. Currently I just have a hodgepodge mess of external drives for storage. I'm maxed out, and I have some new laptops on the way with much larger drives and I need to work out a good storage solution for backing them up, as well as storing media on the server. I need around 2 TB of storage for the time machine backups from my various systems and around 2 TB more for media. I would like to build this to handle around 6 TB total so I have some growing room. Since I'm using a Mac Mini as the server I need to use external enclosure(s) that support USB 2 or Firewire 800 (preferred) or gigabit Ethernet. Performance of the system isn't a huge concern since the majority of the access from other computers is done over 802.11N. I plan on using 2TB drives, for the final version, but initially I'll try and use my existing 2 (1TB) drives + some new 2TB drives, and swap the 1TB ones out as I fill up. As to the actual questions: Should I use hardware RAID in some enclosure? Because if the enclosure dies I have to find an identical one to get to my data right? Wouldn't a software RAID be better as I can use any method of connecting the drives to the system? Remember OS X server is my OS. What if I had to reinstall OS X, can I restore the software RAID easily? What RAID version should I use? For the 2TB used for the time machine disk I don't see why I need RAID here, just a single 2TB drive since its already the backup, but for the remaining 4TB it would be the only copy of the data so I should build some redundancy. I had a RAID 5 setup using a cheep RAID PCI card years ago running RAID 5 in a 2 TB array and when a drive died it wanted 48 hours to rebuild. Is this crazy slow for a setup of this size or is this to be expected? Any suggestions as to drive enclosures?

  Read the article

• Is there a historical computer peripherals or accessories museum or even just a current list?

  - by zimmer62

  Thinking about all the unique and different peripherals I've owned over the years, from ISA capture cards, to parallel port controlled shutter glasses for 3d games. I've seen many many accessory or computer peripherals come and go. The nostalgia of these things is a lot of fun. I tried to find some sort of historical time-line or list but what mostly turned up is computers themselves. I'm more interested in the mice, scanners, the weird adapters that shouldn't exist, short run very rare products, strange devices from computer shows in the 80's and 90's... Hardware you might find in a geeks basement that would be completely useless now, but was the coolest thing around when it was new. An example would be a drawing tablet I had for my TI-99 computer, or the audio tape player accessory for a C64 which let you save files to audio tapes, An ISA card that did the same for PC's hooked up to a VCR. Remember that IBM-PC Jr upgrade kit, that added a floppy drive, more memory and the AT switch in the back? I'd love to find either a wiki, or a list that has already been assembled which contain many of these weird (or common) accessories. I've had so many over the years I suppose I could start a wiki here if such a list doesn't already exist.

  Read the article

• Connect trough remote computer connection

  - by Didac

  First, sorry for my english and my poor knowlodge of this subject. I have a dedicated server placed in Germany (windows 2008 R2) and I live in spain. I would like to access internet from my home computer (Windows 7 Pro x64), trough my server in Germany, so I can use a German IP, what I need some times. I have complete acces in to both computers, but I just don't know where to start. (My knwoledge is limited to software development :/ ) I'd like to know where to start, if I need to create a VPN and so.. Thanks in advance! Update 1 I tried a lot of options of OpenVPN, but I sadly I know nothing abuot networking, so I have to accept I do not know what I'm doing :( Here are my config files (note most of the options are from the sample config files). server.conf #server config file start port 1194 proto udp dev tun server 10.0.0.0 255.255.255.224 #you may choose any subnet. 10.0.0.x is used for this example. ca "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\ca.crt" cert "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\server.crt" key "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\server.key" dh "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\dh1024.pem" push "redirect-gateway def1" push "dhcp-option DNS 8.8.8.8" #the following commands are optional keepalive 10 120 comp-lzo persist-key persist-tun verb 5 #config file ends client.conf #client config file start client dev tun proto udp remote 176.9.99.180 1194 resolv-retry infinite nobind persist-key persist-tun ca "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\ca.crt" cert "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\client1.crt" key "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\client1.key" ns-cert-type server comp-lzo verb 5 explicit-exit-notify 2 ping 10 ping-restart 60 route-method exe route-delay 2 # end of client config file And here's the server's network settings: IP address: 176.9.99.180 Subnet mask: 255.255.255.224 Default gateway: 176.9.99.161 Preferred DNS server: 127.0.0.1

  Read the article

• Alternative Bluetooth Stacks for Windows 7 64bit

  - by Martin

  I have a notebook with an inbuilt Broadcom BCM2046 bluetooth adapter and several bluetooth HID-devices (mice, keyboards etc.) The operating system is Windows 7 64 bit Professional. The HID-devices all work perfectly with other computers, but on the system mentionend above, problems with some power-saving features inside the HID-devices occur (see eg. Amazon reviews for Microsoft Mobile Keyboard 6000 not waking up). I have tried the bluetooth drivers supplied by Windows update and the latest Broadcom drivers directly from the Broadcom updater software. The problems persist (I can rule out any further configuration issues or alternative device drivers, I have tried every possibility). I have tried a trial version of the BlueSoleil Bluetooth stack and it solved the wake-up problem. However the BlueSoleil stack causes some other problems, is relatively expensive and I would prefer not to use it. My question: are there any other alternative bluetooth stacks availible for Windows 7 64bit? To my knowledge there used to be Toshiba Bluetooth stack for non-Toshiba hardware, but the older versions I have found on the internet do not install, they do not seem to recognize the bluetooth hardware when installing the driver.

  Read the article

• Regarding AD Domain controllers and remote branch offices

  - by Alex

  We have central HQ building and a lot of small branch offices connecting via VPN and want to implement AD (If you can believe we still haven't). We want everyone to log in using domain accounts and be policed centrally. We are OK with having a RODC in a branch office with like 10 computers. But we have these small branches with two to four PCs only. Some of these branches connect to HQ via IPSec site-to-site VPN, some via remote access (client-based) VPN. So there is no problem with ones that have local RODC or connecting to HQ DCs via VPN router. But how about small branches? We don't really want to set up a machine there, neither we want to invest into Windows Server licenses or fancy network equipment. Also, the problem is that we cannot access HQ DCs via VPN because we are not logged in and connected to HQ internal network yet, so DCs aren't reachable. What is typically done in that situation if it is needed to have central management over policies on those PCs? Or is it better to let 'em loose and use local policies and accounts in this situation?

  Read the article

• Advice on Computer Specs for overall development/general use machine

  - by Ender

  At the moment I am restricted to a laptop with 512MB of RAM, a 120GB HDD and a 1.5GHz Intel processor for all my development and general browsing needs, and as you can probably tell using it for anything modern is a painful experience. As a result I've decided to buy myself a new desktop computer, one that will stand the test of time and one that can be upgraded easily. Rather than build the machine myself I've decided to go through Dell as I've had good experiences with them when purchasing computers for my family. I've had my eye on this as it's got a good amount of RAM, has a decent-rated processor and isn't priced too badly. http://www1.euro.dell.com/uk/en/home/Desktops/inspiron-580/pd.aspx?refid=inspiron-580&s=dhs&cs=ukepp1&~oid=uk~en~20211~inspiron-580_d005827~~ Intel® Core™ i5 Processor 750 (2.66GHz, 8MB) Genuine Windows® 7 Home Premium 64bit - English Display Not Included ATI Radeon™ HD 5450 1GB DDR3 graphics 6144MB Dual Channel DDR3 [3x2048] Memory 1TB (7200rpm) SATA Hard Drive DVD +/- RW Drive (read/write CD & DVD) with DVD Burn software 1 year of coverage included with your PC McAfee® Security Centre - 15 Month Protection - English After the pain of using a slow laptop for all this time the main thing I want is speed. I may look to play a couple of basic games on it, nothing too powerful. Obviously I'll be doing some development on it too so it'll have to be able to handle the latest IDE's and Database tools like SQL Server pretty quickly. Finally, should I ever need to improve it I'd like to be able to add more RAM and change some of the parts. I wouldn't have thought this would be a problem but a few people I've spoken to have said that the amount of RAM the motherboard can handle isn't that great. Is this true? How long can I expect to be using this computer before it's too slow? Thanks in advance for the help.

  Read the article

• NumLock is so weired in Ubuntu

  - by ???

  The NumLock and the keypad is so weired in Ubuntu. I have two computers, A is a desktop, with USB keyboard, B is a laptop, with laptop keyboard and another USB keyboard. On the desktop A, whether the NumLock is on or off, the number keys on the keypad just don't work. Also the NumLock LED is always off. The logs shown in xev: KeyPress event, serial 36, synthetic NO, window 0x6800001, root 0xb0, subw 0x0, time 9541332, (172,-12), root:(1846,452), state 0x0, keycode 77 (keysym 0xff7f, Num_Lock), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x6800001, root 0xb0, subw 0x0, time 9541412, (172,-12), root:(1846,452), state 0x0, keycode 77 (keysym 0xff7f, Num_Lock), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False And on the laptop B, I found that, when the NumLock is on, then many key combinations won't work. For example, generally Ctrl-A is used to select all, but it won't work when NumLock is on. The logs shown in xev: (no log when pressed Fn+NumLock on the laptop keyboard) Logs when pressed the NumLock on the USB keyboard: (Switch On) KeyPress event, serial 40, synthetic NO, window 0xb600001, root 0xac, subw 0x0, time 22187595, (102,107), root:(1198,133), state 0x10, keycode 77 (keysym 0xff7f, Num_Lock), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False PropertyNotify event, serial 40, synthetic NO, window 0xb600001, atom 0x1b8 (XKLAVIER_STATE), time 22187601, state PropertyNewValue KeyRelease event, serial 40, synthetic NO, window 0xb600001, root 0xac, subw 0x0, time 22187723, (102,107), root:(1198,133), state 0x10, keycode 77 (keysym 0xff7f, Num_Lock), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False (Switch Off) KeyPress event, serial 40, synthetic NO, window 0xb600001, root 0xac, subw 0x0, time 22187899, (102,107), root:(1198,133), state 0x0, keycode 77 (keysym 0xff7f, Num_Lock), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False PropertyNotify event, serial 40, synthetic NO, window 0xb600001, atom 0x1b8 (XKLAVIER_STATE), time 22187904, state PropertyNewValue KeyRelease event, serial 40, synthetic NO, window 0xb600001, root 0xac, subw 0x0, time 22188003, (102,107), root:(1198,133), state 0x10, keycode 77 (keysym 0xff7f, Num_Lock), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False

  Read the article

• Windows 7 caches FTP credentials?

  - by Martin Booka Weser

  On my remote maschine i have an iis 7.5 (win server 2008) and set up an ftp site with iis manager authentication. I then did active directory user isolation and isolated my users to physical folders according to their names. So far, so good. I can access with ftp cliens from everywhere with different test accounts that i previously set up in the iis manager auth. Every user connects to its own folder. When i now tested with windows 7 as a client i did the following. Explorer - computer - right click - add network address - the ip of my remote maschine - user1 - password1 Perfect - it works. I now want to connect with user2. So I deleted this network address and set up a new connection, but with user2 (or even anonymous) instead. Now the strange thing: Windows doesn't even ask me for a password again. It just connects me to the folder of the user1. I already disabled ftp caching in the IIS and i disabled the user1 account in IIS manager authentication! Still, if i set up a network connection with this windows 7 it connects to the folder user1 . No matter which username i use (anonymous, administrator, user2,...). And if i connect with other ftp clients or other computers it all works perfectly. So I assume that this one windows somehow caches the credentials... But then, why does the IIS still accepts this credentials even if i disabled this user1 account??? Thanks.

  Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >