Search Results

Search found 5885 results on 236 pages for 'monitor'.

Page 150/236 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

• Looking for a software solution which acts like a hardware KVM

  - by Daisetsu

  I've seen programs like Synergy before which allow a keyboard and mouse to be used across multiple systems. Unfortunately Synergy treats both systems like they are the same thing (when you move the mouse too far to the right it jumps to the other computer, along with keyboard input). I only have 1 monitor so what I need to do here is have a quick way to view my other desktop that is easy to manage. Remote desktop is difficult because you have to take it out of fullscreen, then minimize it and then re-maximize it when you want to use it again. If there were a single button I could hit to switch to the other computer that would be optimal. Both computers are on the same lan.

  Read the article

• 3 or 4 monitors with Nvidia and Ubuntu

  - by Jason

  I saw that you are (were?) running 4 monitors with Ubuntu 8.10 and two Nvidia cards (http://stackoverflow.com/questions/27113/how-to-use-3-monitors). I was curious if you were doing this with Xinerama, a hacked up TwinView config, or multiple X screens, or some other method? Does it work with compiz? I intend to run my Dell 30" in the middle with two 1280x1024 on the sides and continue to use one X screen, and run compiz, on Ubuntu 9.04. Currently, I am using 2 monitors with twinview and compiz, which runs fantastic. I just can't get the third monitor running (unless I enable it in its own X screen, and then enable Xinerama to enable windows to be dragged as if all one X screen, but this breaks compiz, and I don't care much for having separate X screen). I am very interested in knowing how you set up 4 monitors with 2 GPU's. Thanks!

  Read the article

• Wrong PC-projector resolution in Windows 7

  - by peter.olsson

  I'm connecting a PC-projector (Benq MP721) to a Windows 7 Professional laptop (HP 6730b). All the output settings on the laptop, including the laptop screen, changes to 1024x768 (which the projector supports). However the projector says it receives 1360x768 and asks me to change the resolution to 1024x768. I'm using mirrored display. The laptop is 1024x768 The screen resolution in the control panel says 1024x768 The Intel graphics card utilities says 1024x768 The driver for the projector is a Generic PnP Monitor Is there anything in Windows 7 that would convert my 4:3 resolution to wide screen automatically?

  Read the article

• Needs free/ opensource network monitoring tool for office LAN

  - by Amit Ranjan

  I know there must be a lot similar questions on SU. Let me explain my setup first. I have 4-5 PC, Laptops and Few Android Phones in my office. To get them on a network , I have a UTStarCom, WA3002G1 ADSL2+ router with a landline broadband connection which has nothing to do with any PC except the configuration settings. Broadband channel is always on, we need to switch on the router and the internet is ready for us. No Internet Connection sharing is done via any PC. I have a limited 20GB monthly plan, which is consumed in 10-20 days, depending upon the download requirements. So in the above case, i need some suggestions from you: How do I monitor my Internet Bandwidth along-with the connected systems, realtime? Any free opensource tool available? Tweaks / Changes in PC to save bandwidth as my ISP do not have any Unlimited plan. PC and Laptops are Windows XP and/Or windows 7. Either of the platform tools are welcome.

  Read the article

• Best/Preferred software for photography.

  - by chills42

  I am just getting into photography as a hobby, and am looking for some good tools for image uploading/browsing/editing. I am currently using the Canon EOS utility that came with the camera for uploading, Picasa for browsing, and GIMP for editing. Pros: The files are stored using the standard file system (no proprietary library like iPhoto) Great photo editing possibilities Free (except the Canon Utility, but that was bundled) Cons: Multiple programs Hard to view the Exif Data (I like the way that iPhoto displays the data) Over-simplified editing tools in Picasa What other tools should I look into? Also, I occasionally shoot in RAW, and would prefer Mac support (better monitor), but I also have windows and linux machines.

  Read the article

• Diferent keyboard layouts at same time for diferent devices

  - by Joao Carlos

  Hello, I have a MacBook Pro running Snow Leopard, and I am using it was a portable but also desktop computer. In order to acheive this, i bought a VGA adapter and I am using it with an external mouse+keyboard+monitor. The problem is, the external keyboard layout is diferent from the one on the macbook. It is set to US qwerty (its a logitech G15), and because of that, most keys behave diferently from what they are supposed to. Question is, how can I set up diferent layouts at same time for diferent devices? I want US for external keyboard and PT for the default one.

  Read the article

• Getting out of the Helpdesk. Getting into the system administration.

  - by eric.s

  Today I found out that the job which would have been a promotion for me went to an outside candidate. The position is for a systems admin on our LAN team. I have been working on the helpdesk here for almost two years with another two years experience working it prior. While we are the first tier support we also work in AD, monitor and update certain servers and set up and deploy Windows/Mac images for those we support. What I am looking for here is what can I do to better myself to inside/outside places to move up this ladder? I take what I can from my job - working on projects that I can learn from - but what projects should I be volunteering for? What can I do for myself outside to make me a more viable candidate for a systems admin?

  Read the article

• IIS in VirtualBox serving files from shared Ubuntu folder

  - by queen3

  Here's the problem: I want to use Ubuntu. But I need to develop ASP.NET (MVC) sites. So I setup VirtualBox with Win2003 and IIS6. But I would prefer my working files to be located in my Ubuntu home folder. So I setup shared folder in VirtualBox and make IIS6 virtual directory work from there. The problem is, IIS6 can't do this. Whatever I try (mapped drive, network uri path) I get different IIS errors: can't access folder (for mapped drive), can't monitor file system changes (\vboxsvr share path), and so on. Is there a way for IIS6 in virtual machine to configure virtual application folder to be on host machine (Ubuntu) - be it shared folder, mapped drive, smb share, or whatever?

  Read the article

• SNMPD - passing values in a trap

  - by ethrbunny

  Im trying to create an SNMP setup to monitor 500-1K machines. Each will be joined to the SNMPTRAPD server via a VPN. When the client system sends its messages, it's sending its internal address instead of the VPN address even though the 'trapsync' command is using the VPN. This will be a problem as many of these system will have DHCP addresses based on location so there will be overlap. What I'd like to figure out is how to pass extra values with the trap so I can identify which system a given trap comes from.

  Read the article

• Why do SNMP agents need MIB files?

  - by user1495181

  After reading up on SNMP and some of the questions help here I think understand the agent role as a SNMP service to device (Like SQL, it is an API to storage). When you execute a SQL query the SQL engine does all the work and returns the result - You don't need to be aware of how the storage and where the storage is done. But MIBs are not actual storage , so what is the role of my agent? if the agent only register the MIB like i follow in this tutorial, is it not used as handler at all? Say that I want monitor my application's pending request queue, so I want an agent that all SNMP request for application_pending_request will be fired for it and it will return the queue depth. Why do I need to have an actual MIB when all I need to poll my application queue in order to get result?

  Read the article

• Different keyboard layouts at same time for different devices

  - by Joao Carlos

  I have a MacBook Pro running Snow Leopard, and I am using it as a portable but also desktop computer. In order to acheive this, I bought a VGA adapter and I am using it with an external mouse, keyboard, and monitor. The problem is, the external keyboard layout is different from the one on the macbook. It is set to US qwerty (its a logitech G15), and because of that, most keys behave differently than they should. Question is, how can I set up different layouts at same time for different devices? I want US for external keyboard and PT for the default one.

  Read the article

• monitoring nfs with monit

  - by Josh Nankin

  I'd like to monitor NFS mounts and the NFS server process using Monit. On the server, I'd need a PID file, but I can't seem to find a way of getting that created with existing configuration files. Is there a way to do this, or has anyone monitored the server in a different way (checking if port 53 is active, etc). On clients, I was thinking of making Monit simply look for a specific file in an NFS mount, and if it's accessible, all is well. Problem is, if the NFS server does go down, file requests usually hang (perhaps even indefinitely, not sure). How would one get around this issue with monit? Any configuration examples would be greatly appreciated!

  Read the article

• Power supply surges detected during previous power on

  - by Blastcore

  Message is this: "Power supply surges detected during previous power on" "ASUS Auto-Surge was triggered to protect system from unstable power supply" When i went to sleep yesterday and woke up, when i moved the mouse to go back from screen saver, it didn't do anything. So i left it, i came back from class and got this issue. (I didn't restart before going to class... So the screen was left like it was) Today there was a power cut in half of my house. (Computer is on the side that it didn't cut...) Voltages are fine, like always. How do i remove message? It's just maybe sensor glitch? Even disabling the Anti-Surge my PC "shuts down" (Only monitor, but maybe components do too.)

  Read the article

• Windows screen shots via command-line SSH session

  - by Geoff Fritz

  I've browsed the handful of "screen capture" queries here, but I was unable to find anything which addressed my specific need. I'm looking for a command-line tool that I can run via remote SSH connection (by way of the cygwin sshd daemon). There are several to choose from, but the few I've tried (ImageMagick, nircmd, and MiniCap) all result in a blank screen. I assume that this is due to the remotely logged in user not having a proper graphical console session running. The goal here is automate screen capture and retrieval of the main system console (what one would see if they were looking at the physical monitor) through the use of ssh script from a Unix host: ssh user@windowshost "screencap --output /tmp/console.jpg" scp user@windowshost:/tmp/console.jpg /some/destdir Note that these must be done on demand, so polling a remote directory that has snapshots dumped periodically will not work. Bonus points for programs that are open source and have a portable install (so I don't need to RDP/VNC into the machine to run a graphical installer).

  Read the article

• How to open embedded Visio files with only Visio Viewer?

  - by Christopher Galpin

  For some bizarre reason Visio Viewer seems incapable of opening vsd files when they're embedded within a (2010) Excel document: However if I open the Excel document with 7-zip, browse to xl\embeddings, extract oleObject1.bin and rename it to a .vsd file extension it opens perfectly fine with Visio Viewer in Internet Explorer. Since this opens fine on a computer with the full Visio installed, my guess is it's trying to launch Visio rather than IE. Is there something I can do to fix this? I've been scanning with Process Monitor and searching with RegScanner comparing a Visio-installed system to a VisioViewer-installed system and there doesn't actually seem to be any sort of registry value giving direction here... maybe it's just the nature of OLE. (If it can't be fixed I'm okay with converting the extracted one to a .png or so to replace the embedded object, but the "solutions" I've found for vsd to image conversion are very poor or non-working, i.e. buggy code, code with Visio dependencies, or online services.)

  Read the article

• HD movies stutter.

  - by Absolute0

  I just put together a new system build in the hopes that all of my daily tasks would run smoothly and without any hiccups. Unfortunately I am still seeing some sound and sometimes video stuttering when playing HD movies in VLC (no problems with xvid/divx files). My setup is as follows: Intel core i5 750 quad core 2.66mhz 4GB ram asus p55 motherboard radeon hd 5570 video card 650gb 7200rpm western digital sata HDD 23" Nec ea23wmi monitor Operating System: Windows 7 What might be the main bottleneck that needs upgrading to fix my delays? Seems like the hard drive might be the problem but anything faster than 7200rpm is beyond my budget for a decent hard drive. Could it be anything else?

  Read the article

• Can a Mini DisplayPort to HDMI cable support resolutions above 1920x1200?

  - by cnst

  Is it theoretically possible for a cheapo Mini DisplayPort to HDMI cable or adapter to support resolutions above 1920 × 1200, e.g. 2560 × 1440 (QHD)? Or is it always electrically-equivalent to a single-link DVI, and such resolutions above 1920×1200 are out of the question? From empirical evidence, I've tried out some rather expensive brand-name adapter from a local Apple dealer that was marked as HDMI 1.3 compliant with my mid-2013 MacBook Air (5000) and also with X230 (4000), and a QHD monitor, but was only getting a maximum of FHD resulution through such an arrangement.

  Read the article

• Good option for a transparent internet gateway on Mac OS X

  - by Gareth

  Hi I have a small network of Mac systems, and would like to add some internal monitoring of our internet usage, which has recently begun to climb. I would like to configure one of the machines as an internet gateway, and install some monitoring software that could provide graph indications of network usage by machine. The machine would then double as a workstation and as the internet gateway. I can manually configure the machines on the network to use it as a gateway, and would prefer to avoid an explicit http proxy (although it is an option if necessary). What software would serverfault users recommend to provide simple, easily configurable and maintainable network monitoring on Mac OS 10.5.7 (non-server)? The simplest requirement is monitor usage by IP Address, but additional tracking (e.g. destination, protocol, etc) would be useful.

  Read the article

• nVidia Control Panel Won't Recognize SLI

  - by Nakaan

  So yesterday I bought a brand new, 1,000W PSU to replace my 650W one and to allow for SLI. I install it and my second card (both are GTX 560 ti cards). I reinstalled my drivers and my system recognizes both cards. The control panel says "GTX 560 ti x2", I can select between them for Physx, sound output, picture output (although I only have one hooked up to my monitor), etc. But the kicker is I can't turn on SLI. Everything I've read says I'll get a balloon notification saying I can use SLI and the control panel will have a new section, etc, but none of those things happens. Anyone have any ideas? System: Win7 Professional x64 2x GTX 560 ti 3.1 GHz Intel Core i5 1,000W Xion PSU 8GB RAM (Can't think of my motherboard right now) Note: My PSU and MOBO both say they're SLI certified and I'm using an SLI bridge. Edit: Formatting changes

  Read the article

• Toolkit & Habits for Linux Network & System Administration [closed]

  - by slashmais

  I am tasked with the administration of a small office network as well as several workstations running mostly Debian and Ubuntu. There are two servers: one database & print-server, and one backup & file server. Being relatively new to this side of things, knowing enough to help myself to some degree on Linux, I would like to know what software tools and tasks/habits I can use/acquire to learn this field and be effective while doings so. I don't need to know what is the best, just what a newbie sys-admin can use as a starter-pack to learn and use as a base to grow into proper system administration. [edit] What I need is those few basic tools to start with, and the kind of things I need to do regularly, e.g.: which logs to check, when & what to monitor, the kind of 'right' place to start and to which I can ad as I need.

  Read the article

• What was your most expensive computer rig?

  - by AlbertoPL

  I'm curious as to how much people are willing to spend on a typical computer. My most expensive machine is a gaming rig complete with an ATI Radeon HD4850, Wolfdale 3.0 GHZ Intel Core 2 Duo, 500 Gb hard drive, Antec 900 computer case, the works. I also have a 2-monitor set up. I'd have to say this thing has cost me a little more than a grand at this point, and I'd put the total value of the components at roughly $1300. So, how far have you gone with your computer rigs and has it been worth it?

  Read the article

• snmp trap using disman-event mib related issue

  - by jatin bodarya

  notificationEvent ifMtu.1 IF-MIB::ifMtu.1 1.3.6.1.2.1.2.2.1.4.1 monitor -I -u root -s -t -r 18 "Warn: High ipp Usage" -e ifMtu.1 1.3.6.1.2.1.2.2.1.4.1 != The above lines are in my snmpd.conf file which is generating a trap when the condition evaluates to false. My issue is that I want to send "Trap Severity Levels" with it. Is it possible? If so, how? If it isn't is there any other way to send them?

  Read the article

• interesting uses for a headless host running Ubuntu.

  - by Manuel

  Hey! So, I have configured a pc with no monitor, keyboard or mouse running Ubuntu. I use it as a ssh server, file backup, web server, etc. Though, it seems as if I could use it for sooo much more. The problem is I can't think of many more uses. What interesting uses of a headless host have you heard of? Is there a cool trick you want to share? Thanks! Manuel

  Read the article

• application monitoring tools

  - by Shachar

  we're an ISV about to deploy our SaaS application over the internet to our end users, and are currently looking for an application monitoring solution. In addition to monitoring the usual OS-level suspects (I/O, disk space, logs, CPU, RAM, swapping, etc.), we're also looking to monitor, alert and report on internal application events, conditions, and counters (think queue size for internal service, or latency of a service we're getting from a third party via custom APIs). We're started looking at Nagios, Zenoss, etc., but found out those do only low-level stuff, and are currently looking at MOM and ManageEngine. Still, they are far from being an custom app monitoring tool. So - do you have anything to suggest?

  Read the article

• Sharepoint Services 3.0: 403 Forbidden fun

  - by gravyface

  Can't get to the Administration or the "companyweb" site itself; was working up to a week ago. Old threads, blog posts, etc. indicate that there was an issue with a KB update but was resolved when .NET Framework 2.0 SP1 was deployed/installed. Running Process Monitor, I can see a lot of PATH NOT FOUND','NAME NOT FOUND for c:\inetpub\companyweb\Default.aspx, \_themes\ice\...\foo.css, etc. for the w3wp.exe process on CreateFileorQueryOpenoperations. These files do not exist in the location specified. I don't recall these files actually existing in that folder, but I believe they're "created" when requested, pulled in from Common Files/Shared or whatever, in typically-awesome Microsoft Web architecture land (</rant>). Besides reinstalling (which I'm sure will be as much fun as migrating from one server to another was), anyone know what's going on? Google-fu has alluded me.

  Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >