Search Results

Search found 18155 results on 727 pages for 'output'.

Page 150/727 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

• Multithreading recommendation based on program description

  - by user260197

  I would like to describe some specifics of my program and get feedback on what the best multithreading model to use would be most applicable. I've spent a lot of time now reading on ThreadPool, Threads, Producer/Consumer, etc. and have yet to come to solid conclusions. I have a list of files (all the same format) but with different contents. I have to perform work on each file. The work consists of reading the file, some processing that takes about 1-2 minutes of straight number crunching, and then writing large output files at the end. I would like the UI interface to still be responsive after I initiate the work on the specified files. Some questions: What model/mechanisms should I use? Producer/Consumer, WorkPool, etc. Should I use a BackgroundWorker in the UI for responsiveness or can I launch the threading from within the Form as long as I leave the UI thread alone to continue responding to user input? How could I take results or status of each individual work on each file and report it to the UI in a thread safe way to give user feedback as the work progresses (there can be close to 1000 files to process) Update: Great feedback so far, very helpful. I'm adding some more details that are asked below: Output is to multiple independent files. One set of output files per "work item" that then themselves gets read and processed by another process before the "work item" is complete The work items/threads do not share any resources. The work items are processed in part using a unmanaged static library that makes use of boost libraries.

  Read the article

• Using getRotationMatrix and getOrientation in Android 2.1

  - by aaronmar

  I've been having issues with this for far too long. This code should output dx,dy,dz for the accelerometer, and a running total of the dx. It should also output azimuth, pitch, and roll. I've used info from http://bit.ly/codeUsed, but to no avail. This code does not correctly output pitch, azimuth, or roll. It outputs 0.0, -0.0, -0.0 for the last three textviews, respectively. Please restore my sanity by helping me switch (event.sensor.getType()) { case Sensor.TYPE_ACCELEROMETER: accelerometerValues = event.values.clone(); case Sensor.TYPE_MAGNETIC_FIELD: geomagneticMatrix = event.values.clone(); sensorReady = true; break; default: break; } if (geomagneticMatrix != null && accelerometerValues != null && sensorReady) { sensorReady = false; float[] R = new float[16]; float[] I = new float[16]; SensorManager.getRotationMatrix(R, I, accelerometerValues, geomagneticMatrix); float[] actual_orientation = new float[3]; SensorManager.getOrientation(R, actual_orientation); tvXCoordinate.setText(accelerometerValues[0] + ""); tvYCoordinate.setText(accelerometerValues[1] + ""); tvZCoordinate.setText(accelerometerValues[2] + ""); floatXTotal += accelerometerValues[0]; tvXTotal.setText(floatXTotal + ""); tvAzimuth.setText(actual_orientation[0] + ""); tvPitch.setText(actual_orientation[1] + ""); tvRoll.setText(actual_orientation[2] + ""); }

  Read the article

• Ruby JSON.pretty_generate ... is pretty unpretty

  - by Amy

  I can't seem to get JSON.pretty_generate() to actually generate pretty output in Rails. I'm using Rails 2.3.5 and it seems to automatically load the JSON gem. Awesome. While using script/console this does indeed produce JSON: some_data = {'foo' => 1, 'bar' => 20, 'cow' => [1, 2, 3, 4], 'moo' => {'dog' => 'woof', 'cat' => 'meow'}} some_data.to_json => "{\"cow\":[1,2,3,4],\"moo\":{\"cat\":\"meow\",\"dog\":\"woof\"},\"foo\":1,\"bar\":20}" But this doesn't produce pretty output: JSON.pretty_generate(some_data) => "{\"cow\":[1,2,3,4],\"moo\":{\"cat\":\"meow\",\"dog\":\"woof\"},\"foo\":1,\"bar\":20}" The only way I've found to generate it is to use irb and to load the Pure version: require 'rubygems' require 'json/pure' some_data = {'foo' => 1, 'bar' => 20, 'cow' => [1, 2, 3, 4], 'moo' => {'dog' => 'woof', 'cat' => 'meow'}} JSON.pretty_generate(some_data) => "{\n \"cow\": [\n 1,\n 2,\n 3,\n 4\n ],\n \"moo\": {\n \"cat\": \"meow\",\n \"dog\": \"woof\"\n },\n \"foo\": 1,\n \"bar\": 20\n}" BUT, what I really want is Rails to produce this. Does anyone have any tips why I can't get the generator in Rails to work correctly? Thanks! Updated 5:20 PM PST: Corrected the output.

  Read the article

• Complex SQL Query similar to a z order problem

  - by AaronLS

  I have a complex SQL problem in MS SQL Server, and in drawing on a piece of paper I realized that I could think of it as a single bar filled with rectangles, each rectangle having segments with different Z orders. In reality it has nothing to do with z order or graphics at all, but more to do with some complex business rules that would be difficult to explain. Howoever, if anyone has ideas on how to solve the below that will give me my solution. I have the following data: ObjectID, PercentOfBar, ZOrder (where smaller is closer) A, 100, 6 B, 50, 5 B, 50, 4 C, 30, 3 C, 70, 6 The result of my query that I want is this, in any order: PercentOfBar, ZOrder 50, 5 20, 4 30, 3 Think of it like this, if I drew rectangle A, it would fill 100% of the bar and have a z order of 6. 66666666666 AAAAAAAAAAA If I then layed out rectangle B, consisting of two segments, both segments would cover up rectangle A resulting in the following rendering: 4444455555 BBBBBBBBBB As a rule of thumb, for a given rectangle, it's segments should be layed out such that the highest z order is to the right of the lower Z orders. Finally rectangle C would cover up only portions of Rectangle B with it's 30% segment that is z order 3, which would be on the left. You can hopefully see how the is represented in the output dataset I listed above: 3334455555 CCCBBBBBBB Now to make things more complicated I actually have a 4th column such that this grouping occurs for each key: Input: SomeKey, ObjectID, PercentOfBar, ZOrder (where smaller is closer) X, A, 100, 6 X, B, 50, 5 X, B, 50, 4 X, C, 30, 3 X, C, 70, 6 Y, A, 100, 6 Z, B, 50, 2 Z, B, 50, 6 Z, C, 100, 5 Output: SomeKey, PercentOfBar, ZOrder X, 50, 5 X, 20, 4 X, 30, 3 Y, 100, 6 Z, 50, 2 Z, 50, 5 Notice in the output, the PercentOfBar for each SomeKey would add up to 100%. This is one I know I'm going to be thinking about when I go to bed tonight. Just to be explicit and have a question: What would be a query that would produce the results described above?

  Read the article

• fortran 90 user defined type, passing by value ?

  - by user279137

  I have an issue in fortran 90. I have a user defined type and when I call one of the MPI subroutines the data looks to be passed by values (not address, as I thought it should). The output arguments aren't modified. It seems to be specific to the MPI calls I tried the same thing in a simple test, and I can change the passed in values in the calling scope. I'm not sure why this is because I thought fortran always pass by address. Any idea what could be going on? Just to be clear the commented snippet shows how the calls are made. The in the first call, c%NSubDomains, is an output argument and should be modified in the calling scope, but its not. WHen I call with an array rather than a member of user defined type it works, in the uncommented snippet. ! ! This doesn't work output values aren't modified ?? ! call MPI_Dims_create(c%NProcs,c%NDims,c%NSubDomains,iErr) nsubs(:)=0 call MPI_Dims_create(c%NProcs,c%NDims,nsubs,iErr) c%NSubDomains=nsubs Thanks

  Read the article

• Using PHP substr() and strip_tags() while retaining formatting and without breaking HTML

  - by Peter

  I have various HTML strings to cut to 100 characters (of the stripped content, not the original) without stripping tags and without breaking HTML. Original HTML string (288 characters): $content = "<div>With a <span class='spanClass'>span over here</span> and a <div class='divClass'>nested div over <div class='nestedDivClass'>there</div> </div> and a lot of other nested <strong><em>texts</em> and tags in the air <span>everywhere</span>, it's a HTML taggy kind of day.</strong></div>"; When trimming to 100 characters HTML breaks and stripped content comes to about 40 characters: $content = substr($content, 0, 100)."..."; /* output: <div>With a <span class='spanClass'>span over here</span> and a <div class='divClass'>nested div ove... */ Stripping HTML gives the correct character count but obviously looses formatting: $content = substr(strip_tags($content)), 0, 100)."..."; /* output: With a span over here and a nested div over there and a lot of other nested texts and tags in the ai... */ Challenge: To output the character count of strip_tags while retaining HTML formatting and on closing the string finish any started tags: /* <div>With a <span class='spanClass'>span over here</span> and a <div class='divClass'>nested div over <div class='nestedDivClass'>there</div> </div> and a lot of other nested <strong><em>texts</em> and tags in the ai</strong></div>..."; Similar question (less strict on solution provided so far)

  Read the article

• eclipse tomcat debug mode slow - pegs cpu

  - by andersonbd1

  Running Tomcat through eclipse works fine in non-debug mode, but not in debug mode. When I try to start the Tomcat server in debug mode, the console output looks fine for a while, but then starts slowing down and eventually just stops, pegging the cpu at 100%. I don't think it's relevant, but just in case - here's the console output right about when it starts slowing down and eventually stopping (by stopping I mean no more console output, but still 100% cpu). 2009-09-02 14:35:30,859 INFO NONE org.springframework.context.weaving.DefaultContextLoadTimeWeaver:72 - Found Spring's JVM agent for instrumentation 2009-09-02 14:35:49,562 INFO NONE org.springframework.beans.factory.support.DefaultListableBeanFactory:414 - Pre-instantiating singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@ed889d: defining beans [... 2009-09-02 14:37:31,031 INFO NONE org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean:221 - Building JPA container EntityManagerFactory for persistence unit ... I tried everything I could think of to fix it: cleanesd tomcat working directory restarted eclipse restarted Windows refreshed/cleaned all projects I first had this problem last week using eclipse ganymede. I had been running fine in debug-mode for several months prior to this issue. I didn't make any significant changes to our project that would cause this. Eventually, I upgraded to eclipse galileo which solved my problem. Now 2 days later, I'm having the same problem in galileo. Like I said it works fine in non-debug mode. Any help is much appreciated. I should add that other things work in debug mode - for instance junit tests, so it is something specific to tomcat.

  Read the article

• drupal - override form action?

  - by n00b0101

  I originally started this question in another thread, but that thread was sorta, kinda answered, and now I primarily want to know how to specify another form action... I tried using the code below, but the form action, when output, remains unchanged, although looking at the print_r($form), it's correctly changed... Why isn't it picking up? function mytheme_user_profile_form($form) { global $user; $uid = $user->uid; //print '<pre>'; print_r($form); print '</pre>'; $category = $form['_category']['#value']; switch($category) { case 'account': $form['#action'] = '/user/'.$uid.'/edit?destination=user/'.$uid; break; case 'education': $form['#action'] = '/user/'.$uid.'/edit/education?destination=user/'.$uid; break; case 'experience': $form['#action'] = '/user/'.$uid.'/edit/experience?destination=user/'.$uid; break; case 'publications': $form['#action'] = '/user/'.$uid.'/edit/publications?destination=user/'.$uid; break; case 'conflicts': $form['#action'] = '/user/'.$uid.'/edit/conflicts?destination=user/'.$uid; break; } //print '<pre>'; print_r($form); print '</pre>'; //print $form['#action']; $output .= drupal_render($form); return $output;

  Read the article

• Custom xsl rendering for lookup field in list view (SharePoint 2010)

  - by Luc

  I'm trying to change rendering of a list column on list view page. After a few tutorials and some hair pulling I managed to create an xslt for a calculated and currency field (from fldtypes_XXXXXX.xsl): <xsl:template match ="FieldRef[@Name='MarkCalc']" mode="Text_body"> <xsl:param name="thisNode" select="."/> <xsl:value-of select="$thisNode/@*[name()=current()/@Name]" disable-output-escaping ="yes"/> </xsl:template> <xsl:template match="FieldRef[@Name='CurrencyTest']" mode="Number_body"> <xsl:param name="thisNode" select="."/> <b><xsl:value-of disable-output-escaping="yes" select="$thisNode/@*[name()=current()/@Name]" /></b> </xsl:template> Then I tried to do the same for a lookup field, but it just won't work. This is my last attempt (I copied it from SharePoint designer). What am I missing? <xsl:template match="FieldRef[(@Encoded) and @Name='Lookup1']" mode="Lookup_body"> <xsl:param name="thisNode" select="."/> <b><xsl:value-of select="$thisNode/@*[name()=current()/@Name]" disable-output-escaping="yes" /></b> </xsl:template>

  Read the article

• Efficient Multiple Linear Regression in C# / .Net

  - by mrnye

  Does anyone know of an efficient way to do multiple linear regression in C#, where the number of simultaneous equations may be in the 1000's (with 3 or 4 different inputs). After reading this article on multiple linear regression I tried implementing it with a matrix equation: Matrix y = new Matrix( new double[,]{{745}, {895}, {442}, {440}, {1598}}); Matrix x = new Matrix( new double[,]{{1, 36, 66}, {1, 37, 68}, {1, 47, 64}, {1, 32, 53}, {1, 1, 101}}); Matrix b = (x.Transpose() * x).Inverse() * x.Transpose() * y; for (int i = 0; i < b.Rows; i++) { Trace.WriteLine("INFO: " + b[i, 0].ToDouble()); } However it does not scale well to the scale of 1000's of equations due to the matrix inversion operation. I can call the R language and use that, however I was hoping there would be a pure .Net solution which will scale to these large sets. Any suggestions? EDIT #1: I have settled using R for the time being. By using statconn (downloaded here) I have found it to be both fast & relatively easy to use this method. I.e. here is a small code snippet, it really isn't much code at all to use the R statconn library (note: this is not all the code!). _StatConn.EvaluateNoReturn(string.Format("output <- lm({0})", equation)); object intercept = _StatConn.Evaluate("coefficients(output)['(Intercept)']"); parameters[0] = (double)intercept; for (int i = 0; i < xColCount; i++) { object parameter = _StatConn.Evaluate(string.Format("coefficients(output)['x{0}']", i)); parameters[i + 1] = (double)parameter; }

  Read the article

• HtmlAgilityPack giving problems with malformed html

  - by Kapil

  I want to extract meaningful text out of an html document and I was using html-agility-pack for the same. Here is my code: string convertedContent = HttpUtility.HtmlDecode(ConvertHtml(HtmlAgilityPack.HtmlEntity.DeEntitize(htmlAsString))); ConvertHtml: public string ConvertHtml(string html) { HtmlDocument doc = new HtmlDocument(); doc.LoadHtml(html); StringWriter sw = new StringWriter(); ConvertTo(doc.DocumentNode, sw); sw.Flush(); return sw.ToString(); } ConvertTo: public void ConvertTo(HtmlAgilityPack.HtmlNode node, TextWriter outText) { string html; switch (node.NodeType) { case HtmlAgilityPack.HtmlNodeType.Comment: // don't output comments break; case HtmlAgilityPack.HtmlNodeType.Document: foreach (HtmlNode subnode in node.ChildNodes) { ConvertTo(subnode, outText); } break; case HtmlAgilityPack.HtmlNodeType.Text: // script and style must not be output string parentName = node.ParentNode.Name; if ((parentName == "script") || (parentName == "style")) break; // get text html = ((HtmlTextNode)node).Text; // is it in fact a special closing node output as text? if (HtmlNode.IsOverlappedClosingElement(html)) break; // check the text is meaningful and not a bunch of whitespaces if (html.Trim().Length > 0) { outText.Write(HtmlEntity.DeEntitize(html) + " "); } break; case HtmlAgilityPack.HtmlNodeType.Element: switch (node.Name) { case "p": // treat paragraphs as crlf outText.Write("\r\n"); break; } if (node.HasChildNodes) { foreach (HtmlNode subnode in node.ChildNodes) { ConvertTo(subnode, outText); } } break; } } Now in some cases when the html pages are malformed (for example the following page - http://rareseeds.com/cart/products/Purple_of_Romagna_Artichoke-646-72.html has a malformed meta-tag like <meta content="text/html; charset=uft-8" http-equiv="Content-Type">) [Note "uft" instead of utf] my code is puking at the time I am trying to load the html document. Can someone suggest me how can I overcome these malformed html pages and still extract relevant text out of a html document? Thanks, Kapil

  Read the article

• MSBuild 2010 - how to publish web app to a specific location (nant)?

  - by Mr. Flibble

  I'm trying to get MSBuild 2010 to publish a web app to a specific location. I can get it to publish the deployment package to a particular path, but the deployment package then adds it's own path that changes. For example: if I tell it to publish to C:\dev\build\Output\Debug then the actual web files end up at C:\dev\build\Output\Debug\Archive\Content\C_C\code\sawadee\frontend\IPP-FrontEnd\Source\ControllersViews\obj\Debug\Package\PackageTmp And the C_C part of the path changes (not sure how it chooses this part of the path). This means I can't just script a copy from the publish location. I'm using this nant/msbuild command at the moment: <target name="compile" description="Compiles"> <msbuild project="${name}.sln"> <property name="Platform" value="Any CPU"/> <property name="Configuration" value="Debug"/> <property name="DeployOnBuild" value="true"/> <property name="DeployTarget" value="Package"/> <property name="PackageLocation" value="C:\dev\build\Output\Debug\"/> <property name="AutoParameterizationWebConfigConnectionStrings" value="false"/> <property name="PackageAsSingleFile" value="false"/> </msbuild> Any ideas on how to get it to send the web files directly to a specific location?

  Read the article

• How do you build a Windows Workflow Project with NAnt 0.90?

  - by LockeCJ

  I'm trying to build a Windows Workflow (WF) project using NAnt, but it doesn;t seem to be able to build the ".xoml" and ".rules" files. Here is the code of the csc task that I'm using: <csc debug="${build.Debug}" warninglevel="${build.WarningLevel}" target="library" output="${path::combine(build.OutputDir,assembly.Name+'.dll')}" verbose="${build.Verbose}" doc="${path::combine(build.OutputDir,assembly.Name+'.xml')}"> <sources basedir="${assembly.BaseDir}"> <include name="**/*.cs" /> <include name="**/*.xoml" /> <include name="**/*.rules" /> </sources> <resources basedir="${assembly.BaseDir}"> <include name="**/*.xsd" /> <include name="**/*.resx" /> </resources> <references> ... </references> </csc> Here's the output: Compiling 21 files to 'c:\Output\MyWorkFlowProject.dll'. [csc] c:\Projects\MyWorkFlowProject\AProcessFlow.xoml(1,1): error CS0116: A namespace does not directly contain members such as fields or methods [csc] c:\Projects\MyWorkFlowProject\BProcessFlow.xoml(1,1): error CS0116: A namespace does not directly contain members such as fields or methods [csc] c:\Projects\MyWorkFlowProject\CProcessFlow.rules(1,1): error CS0116: A namespace does not directly contain members such as fields or methods [csc] c:\Projects\MyWorkFlowProject\CProcessFlow.xoml(1,1): error CS0116: A namespace does not directly contain members such as fields or methods

  Read the article

• BCP task hangs while executing

  - by user350374

  Hey guys, We have a HPC node that runs some of our tasks in it. I have a task in my .net project that kicks the bcp utility on the HPC node and the output of the query that I have runs into 9 Mb. When the HPC node runs this task the output of the query is dumped into a file and then after it dumps around 5mb of data it suddenly stops dumping any more data and this happens all the time. (Please note this isnt any data issue as its not crashing on a particular row every time). this may or may not be of significance but I dump the data into a different server which has adequate permissions set. I have run the command with the same query directly on the hpc node and on other comps and it gives the right output. I'm running the bcp command as follows: var processInfo = new ProcessStartInfo("bcp.exe", argument) { RedirectStandardOutput = true, RedirectStandardError = true, CreateNoWindow = true, UseShellExecute = false }; var proc = new Process { StartInfo = processInfo, EnableRaisingEvents = true }; proc.Exited += new EventHandler(bcp_log); proc.Start(); proc.WaitForExit(); So my code actually waits for each bcp task to run before it goes ahead as I call it multiple times. FYI to remind you again it only fails when my o/p exceeds a certain no of bytes in this case approx 5mb. Any help is much appreciated.

  Read the article

• Hooking into comment_text() to add surrounding tag

  - by Stefan Glase

  Trying to hook into the function comment_text() supplied by Wordpress API to wrap the output of every comment into a <div>...</div> container I am running into the following problem: Without my added filter the output of comment_text() looks like this: <p>Hello User!</p> <p>Thank you for your comment.</p> <p>Stefan</p> Thats fine but as I said I would like to have it wrapped into a <div class="comment-text">...</div>. As far as I know the correct way doing this would be in adding a filter to functions.php of my theme and so I did: function stefan_wrap_comment_text($content) { return "<div class=\"comment-text\">". $content ."</div>"; } add_filter('comment_text', 'stefan_wrap_comment_text'); As I can see from the output the given filter works but it has a negative sideeffect to the first paragraph of the content as you can see in the following example. The first paragraph should be <p>Hello User!</p> but looks like this: Hello User!. <div class="comment-text"> Hello User! <p>Thank you for your comment.</p> <p>Stefan</p> </div> Any ideas or hints what I am doing wrong?

  Read the article

• Plot in GNU PLOT

  - by guddi

  I have to plot many lines in GNU PLOT.No problem with the X axis. The problem that I am facing is that most of the plotted lines are at yscale [0-0.05] ,few at range 60-70 and rest at 600-700. These numbers correspond to the y axis scale values. But after I plot I can see only 3 sets of lines all messed up. There is no clearity between the lines. Line at 0 and the line at 0.003 look like one single line. If I set yrange[0:0.05], the lines between this range are clearly vissible. But I want all the lines in the same graph. I have heard of breaking axis's and multi plotting..Can they be useful? how to implement them. Anyone pls help me. Below is the sript set terminal png size 1300,1200 enhanced font 'Verdana,20 set output ' output .png’ set key font 'Verdana,16' set key bottom outside set yrange[500:1000] set xtics("25k" 25000,"50k" 50000,"75k" 75000,"100k" 100000) set grid set title 'Performance Metrics' set ylabel 'Metrices' set xlabel 'FES' plot ' input ' using 1:2 title ' A' with linespoints linewidth 4, ' input ' using 1:3 title B'with linespoints linewidth 4, 'input ' using 1:4 title ' c' with linespoints linewidth 4, 'input ' using 1:5 title 'D' with linespoints linewidth 4, ' input ' using 1:6 title 'E' with linespoints linewidth 4, ' input ' using 1:7 title 'F' with linespoints linewidth 4, ' input ' using 1:8 title 'G' with linespoints linewidth 4, ' input ' using 1:9 title ' H ' with linespoints linewidth 4, ' input ' using 1:10 title ' I' Metric ' with linespoints linewidth 4 set output set terminal windows input.dat is something like this: 25 0.002 0.05 899 455 444 0.08 0.00004 900 700 0.003 This way i have other rows. I have shown only the first one

  Read the article

• T-SQL Right Joins to ALL Entries inc Selected Column

  - by Pace

  Hi Experts, I have the following Query which produces the output below; SELECT TBLUSERS.USERID, TBLUSERS.ADusername, TBLACCESSLEVELS.ACCESSLEVELID, TBLACCESSLEVELS.AccessLevelName FROM TBLACCESSLEVELS INNER JOIN TBLACCESSRIGHTS ON TBLACCESSLEVELS.ACCESSLEVELID = TBLACCESSRIGHTS.ACCESSLEVELID INNER JOIN TBLUSERS ON TBLACCESSRIGHTS.USERID = TBLUSERS.USERID The output is this; 29 administrator 1 AllUsers 29 administrator 2 JobQueue 29 administrator 3 Telephone Directory Admin 29 administrator 4 Jobqueueadmin 29 administrator 5 UserAdmin 29 administrator 6 Product System 27 alan 1 AllUsers 97 andy 1 AllUsers 26 barry 1 AllUsers 26 barry 2 JobQueue 26 barry 3 Telephone Directory Admin 26 barry 4 Jobqueueadmin 26 barry 5 UserAdmin 26 barry 6 Product System 26 barry 7 Newseditor 26 barry 8 GreetingBoard What I would like to do is modify the query so I get all Access Levels regardless of weather there is an entry for that user. What I would also like to do is some sort of exist case so that I get output like the following; 29 administrator 1 AllUsers True 29 administrator 2 JobQueue True 29 administrator 3 Telephone Directory Admin True 29 administrator 4 Jobqueueadmin True 29 administrator 5 UserAdmin True 29 administrator 6 Product System True 29 administrator 7 Newseditor False 29 administrator 8 GreetingBoard False 27 alan 1 AllUsers True 27 alan 2 JobQueue False 27 alan 3 Telephone Directory Admin False 27 alan 4 Jobqueueadmin False 27 alan 5 UserAdmin False 27 alan 6 Product System False 27 alan 7 Newseditor False 27 alan 8 GreetingBoard False 97 andy 1 AllUsers True 97 andy 2 JobQueue False 97 andy 3 Telephone Directory Admin False 97 andy 4 Jobqueueadmin False 97 andy 5 UserAdmin False 97 andy 6 Product System False 97 andy 7 Newseditor False 97 andy 8 GreetingBoard False 26 Barry 1 AllUsers True 26 Barry 2 JobQueue True 26 Barry 3 Telephone Directory Admin True 26 Barry 4 Jobqueueadmin True 26 Barry 5 UserAdmin True 26 Barry 6 Product System True 26 Barry 7 Newseditor True 26 Barry 8 GreetingBoard True ......................................... So the rules are ALWAYS show ALL Entries for ACCESSLEVELS and where EXISTS in ACCESSRIGHTS produce a true / false to show this. I hope this makes sense and hopefully you dont need the table definitions as everything I need to work with is in the original Query. I just need a way of manipulating it slightly and getting the join in the right place. Thank you. Pace

  Read the article

• PHP - Plus sign with GET query

  - by Nate Shoffner

  I have a PHP script that does basic encryption of a string through the method below: <?php $key = 'secretkey'; $string = $_GET['str']; if ($_GET['method'] == "decrypt") { $output = rtrim(mcrypt_decrypt(MCRYPT_RIJNDAEL_256, md5($key), base64_decode($string), MCRYPT_MODE_CBC, md5(md5($key))), "\0"); } if ($_GET['method'] == "encrypt") { $output= base64_encode(mcrypt_encrypt(MCRYPT_RIJNDAEL_256, md5($key), $string, MCRYPT_MODE_CBC, md5(md5($key)))); } echo $output; ?> An example of a URL to encrypt a string would look like this: Encrypt.php?method=encrypt&str=the quick fox Which would return this as the encrypted string: LCuT/ieVa6cl3/4VtzE+jd9QPT3kvHYYJFqG6tY3P0Q= Now to decrypt the string all you have to do is change the "method" query to "decrypt", like so: Encrypt.php?method=decrypt&str=LCuT/ieVa6cl3/4VtzE+jd9QPT3kvHYYJFqG6tY3P0Q= The only problem is that when that encrypted string is decrypted it returns this: ¬ƒ§rYV}̳5Äš·nßì(ñïX8Þ;b I have narrowed down the problem to the plus sign that is in the encrypted string. PHP's GET method seems to translate a plus sign into a blank space. I have searched this bug and found out that it has already been filed here. I have tried different methods listed on that page and others with no success. The closest I got is by using this: $fixedstring = str_replace(" ", "+", $string); and then using $fixedstring in the encryption methods, the problem is, upon decryption, all blank spaces are converted to plus signs. Any ideas?

  Read the article

• Beginner question - Loop invariants (Specifically Ch.3 of "Accelerated C++")

  - by Owen

  Hi - as I said, a complete beginner question here. I'm currently working my way through "Accelerated C++" and just came across this in chapter 3: // invariant: // we have read count grades so far, and // sum is the sum of the first count grades while (cin >> x) { ++count; sum += x; } The authors follow this by explaining that the invariant needs special attention paid to it because when the input is read into the variable x, we will have read count+1 grades and thus the invariant will be untrue. Similarly, when we have incremented the counter, the variable sum will no longer be the sum of the last count grades (in case you hadn't guessed, it's the traditional program for calculating student marks). What I don't understand is why this matters. Surely for just about any other loop, a similar statement would be true? For example, here is the book's first while loop (the output is filled in later): // invariant: we have written r rows so far while (r != rows) { // write a row of output std::cout << std::endl; ++r; } Once we have written the appropriate row of output, surely the invariant is false until we have incremented r, just as in the other example? It's probably something really obvious, anyone could enlighten me as to what makes these two cases different, that'd be great - and thanks in advance for taking the time to answer such a complete novice question. Owen

  Read the article

• Perl : get substring which matches regex error

  - by Michael Mao

  I am very new to Perl, so please bear with my simple question: Here is the sample output: Most successful agents in the Emarket climate are (in order of success): 1. agent10896761 ($-8008) 2. flightsandroomsonly ($-10102) 3. agent10479475hv ($-10663) Most successful agents in the Emarket climate are (in order of success): 1. agent10896761 ($-7142) 2. agent10479475hv ($-8982) 3. flightsandroomsonly ($-9124) I am interested only in agent names as well as their corresponding balances, so I am hoping to get the following output: agent10896761 -8008 flightsandroomsonly -10102 agent10479475hv -10663 agent10896761 -7142 agent10479475hv -8982 flightsandroomsonly -9124 For later processes. This is the code I've got so far: #!/usr/bin/perl -w open(MYINPUTFILE, $ARGV[0]); while(<MYINPUTFILE>) { my($line) = $_; chomp($line); # regex match test if($line =~ m/agent10479475/) { if($line =~ m/($-[0-9]+)/) { print "$1\n"; } } if($line =~ m/flightsandroomsonly/) { print "$line\n"; } } The second regex match has nothing wrong, 'cause that is printing out the whole line. However, for the first regex match, I've got some other output such like: $ ./compareResults.pl 3.txt 2. flightsandroomsonly ($-10102) 0479475 0479475 3. flightsandroomsonly ($-9124) 1. flightsandroomsonly ($-8053) 0479475 1. flightsandroomsonly ($-6126) 0479475 If I "escape" the braces like this if($line =~ m/\($-[0-9]+\)/) { print "$1\n"; } Then there is never a match for the first regex... So I'm stuck with a problem of making that particular regex work. Any hints for this? Many thanks in advance.

  Read the article

• FindBugs not accepting bcel.jar in ANT script

  - by deltaball

  I installed findbugs into my ant lib directory and added the following code into my main ANT script: <target name="findbugs" depends="init"> <findbugs home="C:\\findbugs\\" output="html outputFile="C:\\findbugs\\out.html" jvmargs="-Xms512M"> <sourcePath path="${messageaggregator.src}" /> <class location="${messageaggregator.src}"/> </findbugs> </target> The following xml is called within the init target: <taskdef name="findbugs" classname="edu.umd.cs.findbugs.anttask.FindBugsTask"> On running the ANT script, all I get is the following output: findbugs: [findbugs] Executing findbugs from ant task [findbugs] Running FindBugs... [findbugs] BCEL class compatability error. [findbugs] The version of class org.apache.bcel.generic.ObjectType found was not compatible with [findbugs] FindBugs. Please remove any BCEL libraries that may be interfering. This may happen [findbugs] if you have an old version of BCEL or a library that includes an old version of BCEL [findbugs] in an "endorsed" directory. [findbugs] Output saved to C:\\findbugs\\out.html Why is findbugs not working?

  Read the article

• Create win task to run once and delete immediately using C#

  - by pencilslate

  Here is the use case: - Create a new win task, run immediately and once complete, delete the task. Here is basic code to create a task using C#. using (TaskService ts = new TaskService(null)) { string projectName = "runnowtest" + Guid.NewGuid().ToString(); //create new task TaskDefinition td = ts.NewTask(); Trigger mt = null; //setup task as Registration trigger mt = td.Triggers.AddNew(TaskTriggerType.Registration); mt.StartBoundary = DateTime.Now; //delete the task 1 minute after the program ends td.Settings.DeleteExpiredTaskAfter = new TimeSpan(0, 1, 0); //run the notepad++ in the task td.Actions.Add(new ExecAction("notepad.exe")); //register task Task output = ts.RootFolder.RegisterTaskDefinition(projectName, td); //check output Console.WriteLine(output != null ? "Task created" : "Task not created"); } The API doesn't seem to have a property/flag to mark task as run once. I am trying to ensure the above task runs only once and deletes immediately after that. Any thoughts are much appreciated!

  Read the article

• How to actually query Chinese address in Googlemap API geocoding??

  - by Robert

  I'm following the demo code from article of phpsqlgeocode.html In the db, I inserted some Chinese addresses, which is utf8 encode. I found after urlencode the Chinese address, the output of the address will be wrong.Like this one: http://maps.google.com.tw/maps/geo?output=csv&key=ABQIAAAAfG3KxFZXjEslq8VNxMBpKRR08snBovzCxLQZ9DWwpnzxH-ROPxSAS9Q36m-6OOy0qlwTL6Ht9qp87w&q=%3F%3F%3F%3F%3F%3F%3F%3F%3F132%3F Then output(can't query from php, it have to test as browser url link), 200,5,59.3266963,18.2733433 Whose address is actually located in Taichung Taiwan, but turn out to in Sweden Europe. But when I paste the Chinese address(such as ???????? ?131?56?58?60?) in the url, the result turn out to be fine!!! So my question is how to make sure it send out the original Chiness address?? how to prevent urlencode()??? I found take urlencode() away not change anything. (I've change the MAPS_HOST from maps.google.com to maps.google.com.tw.) (I'm sure my key is right, and other English address geocoding are fine.) Thanks!!

  Read the article

• Calling unmanaged dll from C#. Take 2

  - by Charles Gargent

  I have written a c# program that calls a c++ dll that echoes the commandline args to a file When the c++ is called using the rundll32 command it displays the commandline args no problem, however when it is called from within the c# it doesnt. I asked this question to try and solve my problem, but I have modified it my test environment and I think it is worth asking a new question. Here is the c++ dll #include "stdafx.h" #include "stdlib.h" #include <stdio.h> #include <iostream> #include <fstream> using namespace std; BOOL APIENTRY DllMain( HANDLE hModule, DWORD ul_reason_for_call, LPVOID lpReserved ) { return TRUE; } extern "C" __declspec(dllexport) int WINAPI CMAKEX( HWND hwnd, HINSTANCE hinst, LPCSTR lpszCommandLine, DWORD dwReserved) { ofstream SaveFile("output.txt"); SaveFile << lpszCommandLine; SaveFile.close(); return 0; } Here is the c# app using System; using System.Collections.Generic; using System.Text; using System.Security.Cryptography; using System.Runtime.InteropServices; using System.Net; namespace nac { class Program { [DllImport("cmakca.dll", SetLastError = true, CharSet = CharSet.Unicode)] static extern bool CMAKEX(IntPtr hwnd, IntPtr hinst, string lpszCmdLine, int nCmdShow); static void Main(string[] args) { string cmdLine = @"/source_filename proxy-1.txt /backup_filename proxy.bak /DialRasEntry NULL /TunnelRasEntry DSLVPN /profile ""C:\Documents and Settings\Administrator\Application Data\Microsoft\Network\Connections\Cm\dslvpn.cmp"""; const int SW_SHOWNORMAL = 1; CMAKEX(IntPtr.Zero, IntPtr.Zero, cmdLine, SW_SHOWNORMAL).ToString(); } } } The output from the rundll32 command is rundll32 cmakex.dll,CMAKEX /source_filename proxy-1.txt /backup_filename proxy.bak /DialRasEntry NULL /TunnelRasEntry DSLVPN /profile ""C:\Documents and Settings\Administrator\Application Data\Microsoft\Network\Connections\Cm\dslvpn.cmp" /source_filename proxy-1.txt /backup_filename proxy.bak /DialRasEntry NULL /TunnelRasEntry DSLVPN /profile ""C:\Documents and Settings\Administrator\Application Data\Microsoft\Network\Connections\Cm\dslvpn.cmp" however the output when the c# app runs is /

  Read the article

• Shell script to decrypt and move files from one directory to another?

  - by KittyYoung

  So, I have a directory, and in it are several files. I'm trying to decrypt those files and then move them to another directory. I can't seem to figure out how to set the output filename and move it. So, the directory structure looks like this: /Applications/MAMP/bin/decryptandmove.sh /Applications/MAMP/bin/passtext.txt /Applications/MAMP/bin/encrypted/test1.txt.pgp /Applications/MAMP/bin/encrypted/test2.txt.pgp /Applications/MAMP/htdocs/www/decrypted/ For all of the files found in the encrypted directory, I'm trying to decrypt it and then move them into www/decrypted/. I don't know what the filenames in the encrypted directory will be ahead of time (this script will eventually run via cron), so I wanted to just output the decrypted file with the same filename, but without the pgp. So, the result would be: /Applications/MAMP/bin/decryptandmove.sh /Applications/MAMP/bin/passtext.txt /Applications/MAMP/bin/encrypted/ /Applications/MAMP/htdocs/decrypted/test1.txt.pgp /Applications/MAMP/htdocs/decrypted/test2.txt.pgp So, this is all I have so far, and it doesn't work... FILE and FILENAME are both wrong... I haven't even gotten to the moving part of it yet.... Help? I've written exactly one shell script ever, and it was so simple, a monkey could have done it... Feeling out of depth here... pass_phrase=`cat passtext.txt|awk '{print $1}'` for FILE in '/Applications/MAMP/bin/encrypted/'; do FILENAME=$(basename $FILE .pgp) gpg --passphrase $pass_phrase --output $FILENAME --decrypt $FILE done

  Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >