Search Results

Search found 38458 results on 1539 pages for 'remote access'.

Page 150/1539 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

• How to bridge multiple wireless access points (and internet entry points) into one network

  - by amccormack

  I have two DSL lines coming in to wireless access points and then running to a RV082 Gateway/Bridge. The gateway then runs to a switch, which runs to multiple PCs and a Printer (See picture below). Normally, I would set up the wireless access points behind the gateway, but they are also the modems for the dsl. I have found that I can not print to the network printer if I am connected to the wireless network, but only if I am connected to the wired network. How can I configure the Gateway and APs (Routers) so that the PCs and Printer are all on the same internal network? I have tried turning DHCP off or redirect on the APs and redirect them to the Gateway. However, neither of these worked. Furthermore, I tried pinging the Gateway from the AP but got no response.

  Read the article

• Giving a normal user and Mysql access to a common directory

  - by James R

  We need a common directory where Mysql can do a SELECT INTO OUTFILE and then the file can be picked up by a virtual server user in /home/theuser and worked on. I can perform the SELECT INTO OUTFILE into the /tmp/ dir but theuser does not have access here. Would it be ok to grant the user access to tmp or is that bad practice? The other option I looked at was creating a group 'theusermysql' containing the mysql user and theuser. I set the group on the tree /home/theuser/thedumpfolder and gave write permissions on thedumpfolder, but for some reason mysql still complains that it cannot write here. I'm completely stumped! What would be the best practice way to have a common folder for these two users?

  Read the article

• Cannot access a very specific site from my router

  - by DJDarkViper

  This is a problem for me because this site is important to me. It's MY website. And sadly my email is hosted on my site (which I cant access either) When I try to access my website when connected to my Linksys E3000 router, these days it simply just doesn't go through. When I ping it, its all Request Timed Out, and when I tracert C:\Users\Kyle>tracert blackjaguarstudios.com Tracing route to blackjaguarstudios.com [199.188.204.228] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms CISCO26565 [192.168.1.1] 2 16 ms 15 ms 11 ms 11.4.64.1 3 11 ms 9 ms 11 ms rd1cs-ge1-2-1.ok.shawcable.net [64.59.169.2] 4 20 ms 21 ms 22 ms 66.163.76.98 5 37 ms 36 ms 35 ms rc1nr-tge0-9-2-0.wp.shawcable.net [66.163.77.54] 6 112 ms 84 ms 85 ms rc2ch-pos9-0.il.shawcable.net [66.163.76.174] 7 86 ms 89 ms 90 ms rc4as-ge12-0-0.vx.shawcable.net [66.163.64.46] 8 90 ms 84 ms 85 ms eqix.xe-3-3-0.cr2.iad1.us.nlayer.net [206.223.115.61] 9 97 ms 97 ms 99 ms xe-3-3-0.cr1.atl1.us.nlayer.net [69.22.142.105] 10 128 ms 128 ms 126 ms ae1-40g.ar1.atl1.us.nlayer.net [69.31.135.130] 11 101 ms 97 ms 96 ms as16626.xe-2-0-5-102.ar1.atl1.us.nlayer.net [69.31.135.46] 12 100 ms 97 ms 197 ms 6509-sc1.abstractdns.com [207.210.114.166] 13 * * * Request timed out. 14 * * * Request timed out. 15 * * * Request timed out. 16 * * * Request timed out. 17 * * * Request timed out. 18 * * * Request timed out. 19 * * * Request timed out. 20 * * * Request timed out. 21 * * * Request timed out. 22 * * * Request timed out. 23 * * * Request timed out. 24 * * * Request timed out. 25 * * * Request timed out. 26 * * * Request timed out. 27 * * * Request timed out. 28 * * * Request timed out. 29 * * * Request timed out. 30 * * * Request timed out. Trace complete. C:\Users\Kyle> SHAW Cable being my ISP. Figuring this was all something to do with some setting I made on the router, I reset the thing back to factory defaults. Nope. So I'm at a bit of a loss what to do here, as NO device (Computers, Laptops, Tablets, Phones, PS3/ 360, etc) can access my site or its features, so it's not just my computer either. But every other site is just fine. When I connect to my neighbors router, the site comes up just fine. And shes with SHAW as well. What should I do?!

  Read the article

• Application losing Printer within Terminal Services for remote users

  - by Richard

  Question: What I need to do is have a permanent link to a printer, normally only accessible through Terminal Services (Printer Redirect), to allow Sage Line 50 layouts to see that printer persistently, even after users have disconnected and reconnected to the Terminal Services session? Although the printer is accessible each time a user connects to the Sage Server via Terminal Services, it is given a different session number and therefore the Sage Layout sees it as a different printer. History behind question: Users using Terminal Services connecting to a Sage Server on a different site Using Sage Line 50 v 15 on that Server Users want to print invoices (sage layouts) locally Sage Server cannot see the users local printers, to get around this user uses the Print redirect features of Terminal Services The individual reports can be edited to point to a specific printer by default. This means the user just has to select an invoice and click print, then select the layout/report wanted and it auto prints that invoice to the default printer specified. The problem occurs because the layouts are edited to point to the users local printer "Ricoh 1018d (session#)", note the "(session#)" as this is the users local printer being redirected through the terminal services session. Users are able to print using the sage layouts once the default printer is setup within the layout and saved, but as soon as the users disconnects from the Terminal Services session and then reconnect in the morning go to print, it has lost the connection to that printer. I understand why its failed, because that the printer is on a per session basis and the layout would not be able to hold on to the connection from a previous session. Thanks in advance for any assistance...

  Read the article

• User and group permissions in access.conf

  - by Maddie

  How do I configure access.conf so that the following rule is applied? : Allow the user dia to connect from 192.152.100. Deny the user sim to connect from 192.152.100. Particularity : both the users dia (uid = 8389753) and sim (uid = 500) belong to the group sim (gid = 500) Yes, the user and group sim have the same name and the same id. With the follwing syntax, - : sim : 192.152.100. the user sim is denied, as well as dia (because dia belongs to the group sim). access.conf considers sim as being both the user and group. How do I specify that I want to deny the user sim, but at the same time allow the user dia ?

  Read the article

• Seamless Remote Windows on Linux Client

  - by prestomation

  I really like the RemoteApp features of Windows Server 2008 Are there any solutions for similar functionality for Linux clients and a Windows server? We have users that are running Linux on the desktop and rdesktop to a Windows server, mostly for Outlook. It would be nice if Outlook could behave more seamlessly. From what I can tell rdesktop doesn't do that yet, it only implements RDP 5. I've also seen "SeamlessRDP" from Cendio, which is an extension to rdesktop, but I can't get it to work. I think it doesn't work in Vista, but that is just a guess. Any ideas? And thanks in advance. EDIT: I emailed Cendio and they confirmed SeamlessRDP doesn't work with Server 2008 for unknown reasons. It appears there is no way to do this with a 2k8 server. It's either windows clients with RemoteApp or using a pre-Vista OS with seamlessrdp

  Read the article

• Remote backup with Amazon S3

  - by mjr

  Does anyone know of some good Mac software to sync a network attached storage device or a drobo to Amazon S3? I'd love to mail them a storage device for the first dump and then do nightly syncs.

  Read the article

• Issue resolving names on Hyper-V guest with Routing and Remote Access

  - by John Sheehan

  I've got a Win2k8 standard server running Hyper-V with a Server 2003 web guest instance running. The host is publicly available on the internet. I've created an Internal Private network in the Hyper-V Virtual Network manager. I've set the host IP for that virtual adapter to 192.168.0.1. I've set the IP on the guest to 192.168.0.2. They can ping each other and share files. I can't browse the web on the guest though. NSLOOKUPs are working. I've tried setting the DNS server setting on the guest to 192.168.0.1 and something external like Google's 8.8.8.8 server to no avail. Windows firewall is disabled on the internal virtual network. I've tried it with both DNS installed on the host and without it. I'm not sure which RRAS/NAT settings are relevant to pass on so ask if you need me to clarify anything. How do I get outbound internet working on the guest VM?

  Read the article

• Access folder right-click from inside the folder in Windows 7

  - by BrenBarn

  In Windows XP, if you had a folder open in Explorer, you could access the right-click context menu of a folder by right-clicking the folder icon in the titlebar of the Explorer window. In Win7 this no longer works. Right-clicking the background of the open folder, or right-clicking the folder icon in the info pane at the bottom, does not give the same context menu; there are items that are not in these menus, but are in the menu when I right-click on a folder from outside it. Given that I have a folder open in Explorer, how can I, without navigating out of the folder, access the same right-click context menu that I would get if I navigated to the parent folder and right-clicked my target folder?

  Read the article

• Remote desktop to particular server tries to send print job

  - by Jerry Dodge

  We have a domain network with about 30 computers and an active directory on Windows Server SBS 2003 32bit. Whenever I connect to this server from my Windows 7 Pro 32bit client, it automatically attempts to send some sort of print job. It fails to print however and the printer never seems to receive the job. I have been seeing this happen on every computer which connects to this particular server. It seems to send these print jobs repeatedly, and to different printers, if more than one are installed. As soon as I cancel one print job, it starts another, repeats a few times and finally stops. What could be going on here? PS - I originally thought this was related to MS OneNote but this turns out to happen on computers which do not have OneNote.

  Read the article

• VPN server to access Samba4

  - by VisionIncision

  On my network I have an Ubuntu 12.04 server running Samba4, my domain is fully configured and functional. Now, I would like to enable VPN access over the internet, and have another box to do so. I have been searching on the internet for guides and information etc, but have not been successful. I have however found this guide http://www.howtogeek.com/51237/setting-up-a-vpn-pptp-server-on-debian/ but was wondering if I could adapt it somehow to enable access to my DC services. EDIT: I would need to authenticate my VPN server with my DC, if that is possible of course. Any insight would be wonderful. Regards, Jack Hunt

  Read the article

• Some people suddenly say they cant access my site, but me and all others can

  - by Cain

  I have had this problem many times before and im still unable to find out what is causing it. It happned to me some months ago but it got fixed by itself and had already gone back to normal. Everything was working fine for quite a while until 2 days ago. Some people are reporting they cant access my site, they get a 404 error, however i can access it normally and many other users cant. I dont know whats the common denominator since both groups of people are from the same countries, use the same browsers, OS, etc. so the issue doesnt seem related to that. I have reported this problem before to my both my host and domain registrar but none of them claim responsibility for that. Who is then to blame? Waht can i do to find out whats causing the issue and solve it? Thank you.

  Read the article

• AWS RDS MySQL remote connection extremely slow

  - by nute

  I have a site hosted on AWS EC2 (Elastic Beanstalk), with a MySQL database hosted on AWS RDS. Everything works fine on the production server, fast and all. However when I try to connect remotely from my local machine, it sometimes gets extremely slow (like 4 minutes to load the list of tables), or simply times out. I added my IP in the security group (which I did correctly, since it sometimes works). When it doesn't work, I at the same time check the prod server and it still looks good.

  Read the article

• I can't externally access my home server's wordpress website

  - by piratepartypumpkin

  Basically, I can access everything just fine using 127.0.0.1, but if I use my external IP (123.123.123.123), I get page not found. My router is port forwarding HTTP port 80 to port 8080 on my servers internal IP address. In other words: (Application: HTTP | Start: 80 | End: 8080 | Protocol: Both | IP Address 192.168.0.101 | Enable [YES]) I know it's forwarding properly, because when I stop port forwarding, I can access my router page by using my external IP. My virtual hosts file is: NameVirtualHost *:80 <VirtualHost *:80> DocumentRoot /opt/lampstack-5.3.16-0/apps/wordpress ServerName example.com ServerAlias www.example.com </VirtualHost> and my httpd.conf file is: Listen 80 Servername localhost:80 DocumentRoot "/opt/lampstack-5.3.16-0/apache2/htdocs <Directory /> Options FollowSymLinks AllowOverride None Order deny, allow deny from all </Directory> <Directory "/opt/lampstack-5.3.16-0/apache2/htdocs"> Options FollowSymLinks AllowOverride None Order allow, deny allow from all </Directory>

  Read the article

• IIS 7.5 401.3 Access Denied

  - by Jeffrey

  I am having this weird issue with IIS 7.5 on Windows 2008 R2 x64. I created a site in IIS and manually created a test file index.html and everything worked. When I try to do a deployment, I copy all the files from my local PC to the IIS server, try to access index.html (this is the proper deployed file) and getting 401.3 access denied error. I then try to manually recreate index.html and copy content into this newly created file and the page is accessible again... I just can't figure this out. So the issue is that IIS 7.5 can't server files that have been copied from other PCs. I tried to reset/apply permission settings to the copied folders/files but nothing has worked. Please help. Thanks! By the way, the files that I copied are just some html cutups i.e. generic html, css and image files, nothing special.

  Read the article

• Can't access VirtualBox host-only network from windows host

  - by Markus Orreilly

  I've got two vms running on a windows host, each with a host-only network and ips in the 192.168.56.XXX range. One of them is running apache and serving some content that I want to access from my windows host. However, the windows host can't access the apache server at all. The server is running on 192.168.56.103. ipconfig from windows says it's ip for the Virtual Box interface is 169.254.143.37. I tried route add to route 192.168.56.XX traffic, but everything I tried didn't work and I was probably using it wrong. Any ideas on how to make this work?

  Read the article

• How to access apache behind home router?

  - by Filip

  Hi! I have public IP 89.103.xxx.yyy, then router and home network with 192.168.1.zz My router is set to portforward every 8056 on ip adress 192.168.1.5 (my PC), where apache is running. Apache listen is set to: Listen 127.0.0.1:80 Listen 192.168.1.5:8056 When i try: Listen 89.103.xxx.yyy:8056 I get message "unexpected end of apache" (I'm using easyphp for windows). Added: When i try to access 89.103.xxx.yyy via browser, it's prompting router request for authorization to access router web-settings. And when i try 89.103.xxx.yyy:8056, browser says that connection timed out =(

  Read the article

• Exchange Disconnecting on EHLO with remote telnet

  - by Timothy Baldridge

  When I go to the local terminal on my Exchange box (SBS 2008) I can do this: telnet 127.0.0.1 25 220 Exchange banner here EHLO example.com 250 Server name However when I go from another box, or from the actual IP of the server I get this: telnet 192.168.21.20 25 220 Exchange banner here EHLO example.com 421 4.4.1 Connection timed out Connection to host lost. The odd thing is, this server is currently in production and working fine (receiving mail for our entire domain). But my C# programs can't send mail to it (they get this same error). Any ideas?

  Read the article

• Setting up multiple wireless access points on same network

  - by SqlRyan

  I'd like to add wireless to my network, and I need multiple access points to cover the whole area. I'd like to set them up so that there's only one "wireless network" that the clients see, and it switches them as seamlessly as possible between access points as they wander around (if that's not possible, then at least have it so that they don't need to set up the security by hand on each one the first time, if possible). I've searched online, and there are quite a few sets of mixed instructions (same vs different SSID, frequency, does the security need to match exactly, etc.). Can somebody who has some experience doing this please let me know what they did? I imagine it's pretty simple, but there seems to be no clear cut "yes, you can do this" online, even though I know you can. I have a mid-size LAN with about 20 workstations and two Domain Controllers on it. Also, I'll be doing this with consumer wireless components, if it makes a difference, not enterprise-level components (ie. Linksys rather than Cisco).

  Read the article

• How to configure a wireless router to point to a remote www proxy

  - by Mark

  I have a LG smart Tv with browser. I need the tv browser to connect to a uk based proxy server on port 808. Unfortunately there is no option within tv to setup proxy for its browser. Now the Tv connects via a wireless connection to the internet. IE: TV <- D-Link DIR-605L <- ADSL <- WWW. Is it possible to setup this wireless router to connect the TV to the Proxy ?? If so ? where ? and what setings do i need to change in the wireless router ?? In short my question is ? How do i get the wireless router to make up for the lack of proxy connectivity within my Tv browser ?? Thanks in advance NB: I have configured my Pc's browser's proxy settings, and streaming via the proxy works 100%

  Read the article

• Remote Access Problems with DRAC 5 on Dell PowerEdge 1950

  - by Darin Peterson

  Today I received my first Dell PowerEdge 1950 server with a DRAC 5 card. On my local network I have static configurations on my Linux systems using this for instance: iface eth0 inet static address 192.168.1.210 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 8.8.8.8 8.8.4.4 For the DRAC card, I configured the LAN like this: address 192.168.1.215 netmask 255.255.255.0 gateway 192.168.1.1 For the advanced LAN settings I used dns-nameservers 8.8.8.8 8.8.4.4 I've tried many different IP addresses, but cannot communicate with the card. Is there anyone who might know if I have configuration issues, or maybe if the card might be bad?

  Read the article

• How to block access to websites on a linux box [closed]

  - by user364952

  I'm just curious how many ways people can come up with to block access to a website. I simply intended to block (my own) access to news.ycombinator.com to stop my productivity drain. The first two methods I thought of were editing the hosts file to resolve news.ycombinator.com to 0.0.0.0 or adding a rule to iptables. iptables -A OUTPUT -d news.ycombinator.com -j REJECT Disclaimer: I do realise that the above two methods are easily by-passable. Doesn't help this is my own machine. What other ways does the internet know?

  Read the article

• OSX Sending syslog to a remote box

  - by skarface

  For some reason I have a hard time wrapping my head around how OSX handles things like init, cron, and "normal" daemon maint. Too many years spent doing *nix work. . . anyway. . . How do I configure syslogd on a 10.6 OSX box to send logs to a syslog server?

  Read the article

• Access forbidden! using xampp on macosx 10.5

  - by erikvold

  I installed xampp back around January 2009, and CF8 to test coldfusion on my macbook (note: I do not think that this issue is related to CF, but only xampp). I only ever used the apache part of xampp, and this was working for over a year. In the last couple of months at the most I've started getting the following error message (even for none CF sites, and non .cfm pages, the error occurs for .html files..): Access forbidden! You don't have permission to access the requested object. It is either read-protected or not readable by the server. If you think this is a server error, please contact the webmaster Error 403 erikvold.lan Sun Mar 21 20:58:45 2010 Apache/2.2.11 (Unix) DAV/2 mod_ssl/2.2.11 OpenSSL/0.9.7l PHP/5.2.9 mod_perl/2.0.4 Perl/v5.10.0 As far as I recall I haven't made any change, so it's like it was working for a year then just stopped working..

  Read the article

• Cannot access or open Facebook messages [migrated]

  - by Ehsan Mamakani

  I was up to sending a very long message, about 90,000 characters, to a friend, I tried several times but I got an error sending the message. Finally, I think part of my message was sent because I could see the characters in my message list under my friend's name. When I clicked the name to see my whole message it wouldn't load the message. And now I can't access any of my messages and I get this message from Facebook: Sorry, messages are temporarily unavailable. Please try again in a few minutes. How can I get access to my messages and conversations again?

  Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >