Search Results

Search found 6587 results on 264 pages for 'slow motion'.

Page 150/264 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

• Chipset GPU causes a massive slowdown

  - by zyboxenterprises

  My AMD Radeon HD 7700 recently broke (fan stopped working and GPU overheated), and now I'm running on internal chipset graphics, and it causes a massive slowdown of the whole PC. I've changed the graphics memory from 32MB (minimum) to 256MB (highest), and it hasn't made any difference whatsoever. I'm using Windows Aero, and disabling it should have made a small difference, but it didn't; the whole PC is still slow. I know that it's not the computer build, because I built it myself, and it was a lot faster when it had the AMD Radeon HD 7700 in it, which is the reason why I believe it's the internal chipset graphics that are causing the problem. Is this behavior normal? I don't have the cash right now to go out and buy a new dedicated GPU. I'm using an ASRock N68C-GS FX motherboard with an AMD FX 4100 (overclocked to 4.3GHZ), with 4GB RAM. The overclock was an attempt to resolve this issue, and it isn't related to this issue that the integrated graphics is causing a slowdown.

  Read the article

• What's the fastest way to store/access large files?

  - by philfreo

  I do a lot of video editing on my Mac and need a way to store very large (30 GB) files, and don't have room on my HD. A USB/Firewire external hard drive would work, but it seems way too slow for consistently working with such large files. I've also considered buying another computer, with a large hard drive, and putting it on the same network with a shared folder. What's the fastest / most efficient way to do this? Please consider USB 2.0 speeds, hard drive read times, ethernet speeds, etc. Are there other options I should consider?

  Read the article

• Do I need a VPN to secure communication over a T1 line?

  - by Seth

  I have a dedicated T1 line that runs between my office and my data center. Both ends have public IP addresses. On both ends, we have a T1 routers which connect to SonicWall firewalls. The SonicWalls do a site-to-site VPN and handle the network translation, so the computers on the office network (10.0.100.x) can access the servers in the rack (10.0.103.x). So the question: can I just add a static route to the SonicWalls so each network can access each other with out the VPN? Are there security problems (such as, someone else adding the appropriate static route and being able to access either the office or the datacenter)? Is there another / better way to do it? The reason I'm looking at this is because the T1 is already a pretty small pipe, and having the VPN overhead makes connectivity really slow.

  Read the article

• setting up bridged adapter for VPN server

  - by B. VB.

  I have an Ubuntu linux Linode server that I am trying to install OpenVPN on. I'm following the tutorials (which, it turns out, are quite incomplete). auto br0 iface br0 inet static address 192.168.0.10 network 192.168.0.0 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off When I add this chunk in my /etc/network/interfaces, and I restart networking, my eth0 interface does not have an IP and I cannot get on the network (I need to use a buggy, slow, and annoying AJAX term to do damage repair). Why does adding this screw everything up? Any tips on how to set up this bridged adapter?? Thanks in advance!

  Read the article

• mirroring linux server to external usb harddrive

  - by DuPie

  My google-fu must be sucking. i havent been able to find a good solution for the following: numerous Linux server on commodity hardware Trying to do a recovery mirror copy to external harddrives External harddrives are smaller than source harddrives, but larger than data External drives are connected via usb2 (slow) Servers range from 20GB of data to 400GB of data Servers are remote, so hands on access is a pain need to copy boot files. empty external drives currently Basicly, looking for a way to do use a ghosting solution from INSIDE a running linux server to an external harddrive, without booting a cd etc. the rsync/cpio solutions i've looked at dont work great with grub/dev/proc etc. I understand that since the system isnt offline, it wont be a "mirror" image as files change, but thats ok. Are there any free/commercial products that would work?

  Read the article

• Is an eee-pc with an Atom N550 dual core OK for Rails 3 development?

  - by dan

  I'm buying an Asus eee-pc 1015PEM and hope to do test-driven Rails 3 development on it. Is the CPU fast enough or too painfully slow for this? I plan on installing Ubuntu. I currently develop on a 11 inch Macbook Air 2010 model. It works fine as a Rails development machine. But for some reason I'm drawn to developing on a cheap little netbook. I don't use any IDE's, and my development workflow is mostly switching between Vim, Gnu Screen, and bash.

  Read the article

• Why is USB-sticks so much slower than Solid State Drives?

  - by Jonas

  From what I understand, USB flash memory and Solid State Drives are based on similar technologies, NAND flash memory. But USB-sticks is usually quite slow with a read and write speed of 5-10MB per second while Solid State Drives usually is very fast, usually 100-570MB per second. Why are Solid State Drives so much faster than USB-sticks? And why isn't USB-sticks faster than 5-10MB per second? Is it simply that SSD-drives uses parallel access to the NAND flash memory or are there other reasons?

  Read the article

• Tool to bulk speed up/convert an audio file

  - by User1

  I want to listen to certain podcasts on my phone but I have two common problems: The audio is in some weird format (some don't play on my phone). The audio is slow. I want to use something like sox or avconv to bulk convert the files. Since this is just voice and going on a cell phone, small low-quality files would be best for me. I had some good success using avconv: avconv -i weird.wma normal.ogg Unforunately, this command creates an enormous ogg file and I can't get it play faster. Ideally, this particular file would play at 170% of the original speed.

  Read the article

• Deleting Time Machine in Mac OS X 10.6.4

  - by cappuccino

  Does anyone know how to delete Time Machine in Mac OS X 10.6.4? Before answering: sudo rm -rf /whateverthetimemachineis does not work Disabling the ACL permissions first with sudo fsaclctl -p /whatever -d does not work, sudo: fsaclctl: command not found Use the delete all backup feature in Time Machine... this is slow as hell, would take days. Need a command line solution. No I don't want to reformat the drive, I have other content on it, and no don't say I should have separated on two partition or two drives, I did it this say since partitions cannot be dynamically changed, and two drives is annoying since, whats the point of having a big drive?... plus has no relation to the issue at hand. Already googlied for hours and read everything on Super User, nothing working. and all solutions are the first 4. Any clues?

  Read the article

• Online Windows Server Virtual Hard Drive Images for Use with VMWare Server 1.0

  - by charfeddine.ahmed

  Hello there, I have a remote Server running the VMWare hypervisor. I want to create a virtual machine running Windows Server. However I can't upload mine since my internet connection is slow (would take me days to do the upload). Microsoft has public hard drive images with Windows Server Trial on them, but they work for Virtual PC. I am looking for such files that can be used with VMWare Server. That case I can download these files directly to the server which enjoys a fast connection. Thanks in advance.

  Read the article

• PC with 2 RAMs of different frequencies (1GB 533MHz + 2GB 667MHz) showing only 2GB RAM

  - by srinivas

  I have 6 years old PC with 1.25GB (1GB + 256MB) of DDR2 533MHz RAM. As computer has become very slow and memory usage reaching its limits most of the times, i decided to upgrade RAM. But unfortunately, im not finding retailers selling DDR2 533Mhz RAM near my area. Since I was not sure mixing up RAMs of different frequencies, i searched in web. Most results said they can be mixed but computer would run at lower frequency of the 2 RAMs. So I bought 2GB DDR2 667Mhz RAM expecting my pc to have 3GB RAM running at 533 MHz. But computer properties page shows only 2GB RAM. BIOS settings too show the slot with 2GB 667MHz as ACTIVE and other slot with 1GB 533MHz as "NOT INSTALLED". When I removed 2GB RAM, they computer shows only 1GB RAM. So for some reason, 1GB RAM is not getting detected/used. What is the problem here? thanks in advance.

  Read the article

• Samba PDC plus universal folder

  - by skids89

  I know how to configure samba on my ubuntu box to become a PDC however I need some select files to be accessible to multiple users. These files are beyond their personal files. I.E. users A-C need to be able to access a schedule saved as a spreadsheet. But user D does not and users B-D need to be able to access confidential employee info but user A does not. How do I set this up on top of the PDC structure? Any video tutorials would be a plus. Im new to linux so documentation is a confusing slow slog to learn. Thanks so much in advance!

  Read the article

• How do I lower idle cpu usage in ubuntu linux? Gnome or KDE Variants

  - by Jasen

  My question comes from a kde desktop currently, but it also happens with the gnome instance. When just sitting there, with only the cpu monitor widget running. no open windows, no background processes other than the desktop, my cpu is at ~20%. I wanna know how to fix this, and possibly get better performance out of it. When running my windows side, the cpu will sit at zero, and i generally load new programs about 400ms faster. With windows 7 being as slow as it is, this is not acceptable. and the widget is only set to check every 500ms, so im almost completely sure its not the widget. My system is a Gateway nv 53 amd 2.0 ghz turion with 4 gb of installed ram, and 500 gb hd. both linux and windows are 64 bit. average ram use on either system is about 1.4 gb for just the os

  Read the article

• implementing gravity to projectile - delta time issue

  - by Murat Nafiz

  I'm trying to implement a simple projectile motion in Android (with openGL). And I want to add gravity to my world to simulate a ball's dropping realistically. I simply update my renderer with a delta time which is calculated by: float deltaTime = (System.nanoTime()-startTime) / 1000000000.0f; startTime = System.nanoTime(); screen.update(deltaTime); In my screen.update(deltaTime) method: if (isballMoving) { golfBall.updateLocationAndVelocity(deltaTime); } And in golfBall.updateLocationAndVelocity(deltaTime) method: public final static double G = -9.81; double vz0 = getVZ0(); // Gets initial velocity(z) double z0 = getZ0(); // Gets initial height double time = getS(); // gets total time from act begin double vz = vz0 + G * deltaTime; // calculate new velocity(z) double z = z0 - vz0 * deltaTime- 0.5 * G * deltaTime* deltaTime; // calculate new position time = time + deltaTime; // Update time setS(time); //set new total time Now here is the problem; If I set deltaTime as 0.07 statically, then the animation runs normally. But since the update() method runs as faster as it can, the length and therefore the speed of the ball varies from device to device. If I don't touch deltaTime and run the program (deltaTime's are between 0.01 - 0.02 with my test devices) animation length and the speed of ball are same at different devices. But the animation is so SLOW! What am I doing wrong?

  Read the article

• Is there any two-panels bookmarks manager for Google Chrome?

  - by L. Shaydariv

  Hi to all. I'm just wondering, is there any two-panels-interface (like Total Commander, File Manager, etc) bookmark manager, extension, etc for Google Chrome? Using of the default bookmark manager is not so suitable because of two reasons: 1) I've gathered a very large collection of bookmarks (please, don't ask why) 2) bookmarks hierarchy tree always expands its branches when the bookmark manager is open (this makes the moving of bookmarks through the bookmark tree much and much harder). I tried to use Link Commander but it's very and very slow. Any suggestions? Thank you for advices.

  Read the article

• How much does the geographical location of DNS servers matter?

  - by GreatFire

  We have started to run our own DNS servers located in Asia since that's where our main audience is. However, it seems that some users in the US are having difficulties accessing our website sometimes. I've noticed myself that DNS lookups of our domain from the US are relatively slow (500 msec+). Maybe the problems some users are having are due to other DNS configuration errors, but in general, how much of an issue is the geographical location of DNS servers? Should we have an additional server in the US?

  Read the article

• Linux: Alternative to rsync? (ie, scp with resume)

  - by Joernsn

  I've been using rsync to automatically send files from one box to another, which is great compared to scp, since it supports resuming. However, when resuming a very large file (10gb) rsync has to read both files and compare them, which is very slow. I don't need fancy error handling, just "scp with resume", so here's my question: Is there an alternative to rsync/scp, that supports resuming without having to read both source and destination files? I've read the manuals without finding anything I can use, please let me know if I've missed something. This is the rsync line I've been using: rsync -av --partial --progress --inplace SRC DST

  Read the article

• 10 System LAN latency with ADSL modem as gateway

  - by itsoft3g

  Recently I expanded LAN in my office from 3 to 10 computers. Structure star topology, one ADSL Modem connected to One Switch which is again connected to 10 computers. Also we have Wifi device Netgear which is connected from switch. ADSL Modem acts as the DHCP Server, all the system will have default gateway IP (ADSL Modem's IP) Network latency is now become very high, All the chat severs disconnect often like google talk, skype etc, also internet become very very slow. when all the computer turned on. We have 4 Mbps Download and 100 Kbps upload Net speed. Its look like ADSL Modem cannot able to handle all the connections. I tried to setup a system as default gateway which will connect to modem, not sure how to do this. Please advice on this.

  Read the article

• Filesystem to quickly get recent modifications

  - by liori

  Hello, I've got relatively big filesystem (ext4) with lots of small files and I'd like to backup it. Making full backups often is not feasible to me so I want to have a way to make differential/incremental backups (differential preferred). But... this is laptop, and scanning for changed files takes lots of time. My questions: 1) Is it possible to get list of files changed since some date from ext4's journal? I know it wasn't designed with this idea in mind, and it might be too small for bigger timespans, but maybe it is somehow possible? 2) Is it possible to monitor filesystem modifications and maintain a list of changed files reliably? I think I could use inotify, but this might be too slow to monitor full filesystem and might be unreliable. (by reliable I mean either I get all modifications since last backup (and this list is not missing anything) or an error message). Laptop runs Debian unstable.

  Read the article

• Huge HDD response time in Resource monitor

  - by Mille

  Just bought all parts for a computer and put it together and installed a fresh version of windows 7. After a while, when using the computer it gets very slow, and even closing down windows can take several minutes. I started to look in the resource monitor and though I found the answer watching my hdd. The thing is that the hdd completes all tests in Seagate's SeaTools for Windows successfully. Which makes me doubt on the problem and weather I can send it in to get an replacement. Suggestions on what it could be and what I can do about it? Here a screenshoot from the resource monitor:

  Read the article

• Password Manager that can sync a Blackberry and Mac OSX.

  - by pdhoven

  I use a Blackberry Bold and a Macbook Pro. I am looking for a solution to have a synchronized password manager between the two devices. All the commercial ones I have discovered won't work between a Blackberry and a Mac. The almost solution was KeePass. I like the application on the Blackberry but I could not get the sync working reliably to the Mac. As well, I had to run the PC application by using Mono on the Mac and it was pretty slow. I am happy to pay for a good solution.

  Read the article

• Will I have internet connection issues next day, if I unplug router at night?

  - by headskracher77

  I did this regularly a few years ago and used to feel like I was 'being punished' by the Interent svc provider for disabling access to my computer, because trying to re-connect the next day became a constant pain. I have the same linksys router, a comcast modem, and hi-speed broadband through their LAN. Question: who or what is at fault for lousy internet connections, slow connections, or no connections: (everybody's tech dept. blames everybody else) The router? 10 year olds, maybe obsolete? The modem? came with the service plan - can connect three devices on a sharedconnection. The ISP: I read they not only even control and completely regulate bandwidth usage, but they also ration it!! (true?) So can I safely 'pull the plug' each night for security or not? thnx

  Read the article

• Create swipe controlled simple flipbook style animation in ObjC

  - by eco_bach

  Hi I am a beginner in Obj C development, though quite experienced (over 10 years) with other ECMAscript based languages and OOP development. I want to build a simple flipbook style animation, controlled through swiping motion. I'm sure extremely simple for any advanced ObjC coders. Can anyone with extensive ObjC-CocoaTouch experience give me some higher level recommendations? ie, 1 -general application design, should I start with a simple view based application, or navigation based or? 2 -should I use 3rd party animation frameworks such as Cocos2D, or stick with built in classes and methods? 3 -if using built in methods, classes, what is the recommended way of achieving a animation, that will be controlled via swipe and touch gestures? 4 -I want to eventually have multiple 'flipbooks' that I can 'instantly' swap with one another, ie to give the net effect of an object changing color, etc, but not sure how to approach this from a memory management point of view, related to #1 above Except for point 3 above, I'm not expecting any actual code examples. Just general guidelines to follow and perhaps, what are some next steps I should take in my goal as an ObjC code samurai.

  Read the article

• movieClip in Array displays null, and aren't showing up on stage.addChild(Array[i])

  - by jtdino

  i am new to Actionscript3, i need to know why i keep getting Parameter child must be non-null. And my code won't display 5 enemyBlock objects onto the stage but only just one. any tips and help will be much appreciated. thanks in advance. returns: TypeError: Error #2007: Parameter child must be non-null. at flash.display::DisplayObjectContainer/addChild() at flash.display::Stage/addChild() at BlockDrop_fla::MainTimeline/EnemyBlockPos() at BlockDrop_fla::MainTimeline/frame2() // declare varibles var isEnemyMoving:Boolean = false; var enemyArray:Array; var enemyBlock:MovieClip = new EnemyBlock(); // assign EnemyBlock class to enemyBlock var enemyBlockMC:MovieClip; var count:int = 5; var mapWidth:Number = 800; var mapHeight:Number = 600; function EnemyBlockPos() :void { // assign new MovieClip not null enemyBlockMC = new MovieClip; enemyArray = new Array(); for(var i=1; i<= count; i++){ // add class to MC enemyBlockMC.addChild(enemyBlock); // randomize position enemyBlock.x = Math.round(Math.random()*mapWidth); enemyBlock.y = Math.round(Math.random()*mapHeight); // set motion enemyBlock.movement = 5; // add MC to array enemyArray.push(enemyBlockMC); } for (var w = 1; w <= enemyArray.length; w++) { addChild(enemyArray[w]); } } // endOf EnemyBlockPos

  Read the article

• MySQL maintenance - how to clear the buffer?

  - by Dougal

  We have a server running our web app (PHP / MySQL) which is SLOW. My predecessor says that: "We use to do database maintenance, which use to clear the buffer, cached and unwanted variables." And I wonder what on earth he means with that statement? Does he mean a simple optimize of the tables? Or the query cache? I understand MySQL but don't really know what he is describing. I would appreciate any pointers. Thanks.

  Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >