Search Results

Search found 4750 results on 190 pages for 'wireless adapters'.

Page 150/190 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

  • Can't Configure IBM 8275-416 Switch Via Serial

    - by Sean M
    I am attempting to configure an IBM 8275-416 switch (I found a manual here) via serial connection. However, when I connect with HyperTerminal, the output contains a lot of garbage characters. It's pretty much unusable, because there's enough layout-breaking text-gunk that it's very difficult to determine what's actually being displayed. . I was able to reset the switch to factory defaults via the terminal interface, so I know that it's not entirely broken. It also performs basic functions all right (i.e., you plug in clients and Ethernet cables - they can connect to clients plugged into other ports) - but I'd like it to do more than that (VLANs yay). I don't know if its in-band UI is operational or not, because I can't get the terminal interface to behave well enough to properly turn on the web/SNMP UI. So that's not available. Things I've tried: - Changing the encoding: HyperTerminal lets me choose between Standard JIS and Shift-JIS. Neither setting fixes the issue. - Checking emulation settings: The manual demands VT100, 19200 baud, 8 data bits, and such: I have faithfully applied these settings, both in HyperTerminal's settings and in the properties of the COM1 port in Device Manager (connecting from a Windows machine). - Restoring to factory defaults: See above. Things that it could be, but that seem unlikely: - Cabling: Couldn't find a proper null-modem cable, so used two 232-to-RJ45 adapters. But if it was a problem with the cable, wouldn't it be more likely to not connect or do input at all, rather than just garble the text? Since I was actually able to perform the reset-to-factory defaults operation, I don't think it's this. - Device as a whole broken: It is a decade and change old, so it's possible that it's just dying slowly. Again, though, it seems like there would be more symptoms than just garbled text in the terminal. What else can I try to get a sane interface to this switch?

    Read the article

  • Virtual IPv6 Network between VirtualBox VMs

    - by Ben
    I'm trying to create a virtual IPv6 network as a test environment. I have 5 VirtualBox VMs (Ubuntu Server) with network adapters using host-only networking. You can imagine them being connected in series and every machine connects 2 subnets. I want to ping the last machine from the first one: On: 2001:db8:aaaa::100 I want to ping 2001:db8:dddd::101 (Note: there is no cccc network in between) Only static configuration and routes are used: /etc/network/interfaces auto eth0 iface eth0 inet6 static address 2001:db8:aaaa::100 netmask 64 /etc/network/interfaces auto eth0 iface eth0 inet6 static address 2001:db8:aaaa::101 netmask 64 auto eth1 iface eth1 inet6 static address 2001:db8:bbbb::100 netmask 64 up ip -6 route add 2001:db8:dddd::/64 via 2001:db8:bbbb::101 dev eth1 down ip -6 route del 2001:db8:dddd::/64 via 2001:db8:bbbb::101 dev eth1 I thought there might be some automatic route discovery going on. Anyway, ping6 2001:db8:dddd::100 will not work from aaaa::100 When I add the route: ip -6 route add 2001:db8:dddd::/64 via 2001:db8:aaaa::101 it will work. But the next interface in the same network dddd::101 is not reachable. How could that be? There is a machine with an interface bbbb::101 and another dddd::100 and I can ping the latter one, but the machine connected to it, dddd::101 not?? I also have also turned on forwarding. Any ideas?

    Read the article

  • RPC Server Unavailable on Hyper-V cluster when moving resources after the host adapter has failed

    - by Doug Luxem
    On a Windows 2008 R2 SP1 cluster running Hyper-V, a lost network connectivity on the primary host interface. The interface was rapidly flapping up and down, and this was later determined to be caused by a faulty switch port. As this was a clustered server, the host interface was not fault tolerant (seeing as how the whole server was fault tolerant), so connectivity to the host was going up and down. The Hyper-V guests were completely unaffected by the network outage as they used a dedicated trunk on the server separate from the host interface. Additionally, dedicated interfaces for the cluster and live migration networks were fine. In order to diagnose the server, I tried to move all resources (Hyper-V Guests) to other nodes through Failover Cluster Manager. These moves failed with an error RPC Server Unavailable. The only way to move resources was by shutting down the guests, stopping the cluster service on the Node A, allowing other nodes to take ownership of the resources, and restarting the guests. A few other notes: All nodes have Client for MS Networks and File & Printer Sharing enabled on the Cluster and LM networks. Node A was accessible over cluster and LM networks from other nodes (these are private, cluster-only networks); pingable, CIFs, etc. Accessing \\NODEA is done over the Host adapters, as you would expect in this case and is the reason for the RPC Server Unavailable error with that adapter being down. My questions here are - Is there a way to still use Live Migration in a failure scenario such as this to prevent shutting down the Hyper-V guests? How can the network be reconfigured in the future so that the cluster service attempts to use the cluster and/or live migration networks to issue the RPC requests?

    Read the article

  • What are the replacement options for an IDE hard disk for a DOS based system?

    - by dummzeuch
    I have got a few "embedded" systems running MSDOS 6.2 which boot from and store data to IDE hard disks. Since these drives are nearing their end of life, the question arises how we can replace them. The requirements are: DOS must be able to install and boot from these drives. They must be able to sustain heavy (mostly) write access. If possible, they should be able to survive moderate vibrations (not too bad since the current hard disks have survived several years of that) I considered the following options so far: other ide hard drives: Unfortunately modern IDE drives are too large so DOS cannot boot from them even if I create small partitions. Older IDE drives are just that: old, so they are probably not the most reliable ones any more. SSDs: There are a few SSDs with IDE interface available. I have not yet tried them. Does anybody have any experience with them? They look like the ideal replacement provided that DOS can boot from them and that writing speed does not deteriorate too much (the old hard disks are no race cars either). Compact Flash: There are adapters for using CF with IDE controllers and they work fine. DOS can boot from them and they have no problems at all with vibrations. What I am not sure about is their durability. DOS uses FAT so some very few sectors are written every time the medium is being written to. IDE to SATA converters: I have no idea whether they are any good. Has anybody tried them? It might be an option to use one of these to connect an SATA SSD to the system. Are there any alternatives that I have missed? (We are working on replacing these systems, but it will still take a few years.)

    Read the article

  • IPTABLE & IP-routed netwok solution for HOST net and VM's subnet

    - by Daniel
    I've got ProxmoxVE2.1 ruled KVM node on Debian and bunch of VM's guests machine. That is how my networking looks like: # network interface settings auto lo iface lo inet loopback # device: eth0 auto eth0 iface eth0 inet static address 175.219.59.209 gateway 175.219.59.193 netmask 255.255.255.224 post-up echo 1 > /proc/sys/net/ipv4/conf/eth0/proxy_arp And I've got two working subnet solution auto vmbr0 iface vmbr0 inet static address 10.10.0.1 netmask 255.255.0.0 bridge_ports none bridge_stp off bridge_fd 0 post-up ip route add 10.10.0.1/24 dev vmbr0 This way I can reach internet, to resolve outside hosts, update and download everything I need but can't reach one guest VM out of any other VM's inside my network. The second solution allows me to communicate between VM's: auto vmbr1 iface vmbr1 inet static address 10.10.0.1 netmask 255.255.255.0 bridge_ports none bridge_stp off bridge_fd 0 post-up echo 1 > /proc/sys/net/ipv4/ip_forward post-up iptables -t nat -A POSTROUTING -s '10.10.0.0/24' -o vmbr1 -j MASQUERADE post-down iptables -t nat -D POSTROUTING -s '10.10.0.0/24' -o vmbr1 -j MASQUERADE I can even NAT internal addresses: -t nat -I PREROUTING -p tcp --dport 789 -j DNAT --to-destination 10.10.0.220:345 My inexperienced mind is ready to double VM's net adapters: one for the first solution and another - for second (with slightly different adresses) but I'm pretty sure that it's a dumb way to resolve the problem and everything can be resolved via iptables/ip route rules that I can't create. I've tried a dozen of "wizard manuals" and "howto's" to mix both solution but without success. Looking for an advice (and good reading links for networking begginers).

    Read the article

  • Setting Remote Desktop to allows IPv6 connections

    - by Garrett
    Setup: Basically I have 3 machines (2 virtual and 1 physical) that I would like to be able to RDP in to from outside my NAT (a router). The VMs are Windows 7 and Windows XP, both fully patched with Teredo installed and working, both running in VirtualBox (their host also has Teredo working, though I'm not sure if that matters). They both have bridged network adapters with promiscuous mode enabled. The physical machine is Windows 7 fully patched with an HFS server running on it and a dynamic DNS set up for my public IPv4 address and port forwarded. It also has Teredo installed and working. Symptoms: According to http://test-ipv6.com/ all 3 have public IPv6 addresses, and they can all connect to http://ipv6.google.com/. I can ping the XP VM from the host it's running on but I cannot ping it from any other machine. Also, I cannot ping either of the other machines from anywhere. I cannot connect to any of them over RDP from IPv6, however I can connect to all of them through IPv4. Any ideas what is going wrong?

    Read the article

  • Using Samba to share a folder from a Linux guest with a Windows host in VirtualBox

    - by AmV
    I would like to share a folder from a Linux Guest with a Windows host (with read and write access if possible) in VirtualBox. I read in these two links: here and here that it's possible to do this using Samba, but I am a little bit lost and I need more information on how to proceed. So far, I managed to set up two network adapters (one NAT and one host-only) and install Samba on the Linux guest, but now I have the following questions: What do I need to type in samba.conf to share a folder from the Linux guest? (the tutorial provided in one of the links above only explains how to share home directories) Are there any Samba commands that need to be executed on the guest to enable sharing? How do I make sure that these folders are only available to the host OS and not on the Internet? Once the Linux guest is setup, how do I access each of the individual shared folders from the Windows host? I read that I need to mount a drive on Windows to do this, but do I use Samba logins, or Linux logins, also do I use localhost? or do I need to set up an IP for this? Thanks!

    Read the article

  • How to get data out of a Maxtor Shared Storage II that fails to boot?

    - by Jonik
    I've got a Maxtor Shared Storage II (RAID1 mode) which has developed some hardware failure, apparently: it fails to boot properly and is unreachable via network. When powering it on, it keeps making clunking/chirping disk noise and then sort of resets itself (with a flash of orange light in the usually-green LEDs); it then repeats this as if stuck in a loop. In fact, even the power button does nothing now – the only way I can affect the device at all is to plug in or pull out the power cord! (To be clear, I've come to regard this piece of garbage (which cost about 460 €) as my worst tech purchase ever. Even before this failure I had encountered many annoyances about the drive: 1) the software to manage it is rather crappy; 2) it is way noisier that what this type of device should be; 3) when your Mac comes out of sleep, Maxtor's "EasyManage" cannot re-mount the drive automatically.) Anyway, the question at hand is how to get my data out of it? As a very concrete first step, is there a way to open this thing without breaking the plastic casing into pieces? It is far from obvious to me how to get beyond this stage; it opens a little from one end but not from the other. If I somehow got the disks out, I could try mounting the disk(s) on one of the Macs or Linux boxes I have available (although I don't know yet if I'd need some adapters for that). (NB: for the purposes of this question, never mind any warranty or replacement issues – that's secondary to recovering the data.)

    Read the article

  • IBM BladeCenter S: Disk Configuration

    - by gravyface
    Have just the one storage bay right now (SAS 15K 600GB x 6) and have configured one storage pool in RAID 10 with 4 disks (and two global spares). For each blade, I've created a volume and mapped accordingly: Blade #1 400 GB Blade #2 200 GB Blade #3 100 GB Blade #4 100 GB When I boot up Blade 1 and enter into the UEFI Setup (F1) followed by the Adapters and UEFI Drivers LSI Logic Fusion MPT SAS Driver Utility, I see 4 disks: two are the on-board 73GB drives, the other two are 200GB each and assume I'm being presented with two logical disks from the volume I created and mapped to this blade. I was a bit surprised by this: I figured I would've been presented with one logical drive per volume, not two. I'm assuming I can just configure whatever RAID level I wish that supports two disks, but not really sure what the benefits/trade-offs here. Should I go with RAID 10 on top of RAID 10? RAID 0? Software RAID 0/1/10? Does it even matter? If this is "normal" to see two disks, then I'm going to likely just do some benchmarking and see if it makes a difference changing the RAID levels (my guess is no); if this is not normal, well, please let me know. :)

    Read the article

  • Is there a historical computer peripherals or accessories museum or even just a current list?

    - by zimmer62
    Thinking about all the unique and different peripherals I've owned over the years, from ISA capture cards, to parallel port controlled shutter glasses for 3d games. I've seen many many accessory or computer peripherals come and go. The nostalgia of these things is a lot of fun. I tried to find some sort of historical time-line or list but what mostly turned up is computers themselves. I'm more interested in the mice, scanners, the weird adapters that shouldn't exist, short run very rare products, strange devices from computer shows in the 80's and 90's... Hardware you might find in a geeks basement that would be completely useless now, but was the coolest thing around when it was new. An example would be a drawing tablet I had for my TI-99 computer, or the audio tape player accessory for a C64 which let you save files to audio tapes, An ISA card that did the same for PC's hooked up to a VCR. Remember that IBM-PC Jr upgrade kit, that added a floppy drive, more memory and the AT switch in the back? I'd love to find either a wiki, or a list that has already been assembled which contain many of these weird (or common) accessories. I've had so many over the years I suppose I could start a wiki here if such a list doesn't already exist.

    Read the article

  • Two VGA monitors on Lenovo IdeaCentre H520 Desktop

    - by Sebastian-Laurentiu Plesciuc
    I recently bought a Lenovo IdeaCentre H520 computer and two VGA LED monitors. This particular PC has a dedicated NVIDIA Geforce GT630 video card and an integrated Intel HD Graphics 2500 video card. Both cards have VGA out. The Geforce card also has a HDMI out. I have installed Windows 8 and I can't seem to use both cards. I have connected both monitors, one to the VGA out of the Geforce card and one to the VGA out of the integrated card. I looked through the BIOS options for Video and I can only select the dedicated one, the integrate one or the Auto option. This kinda sucks. I was wondering what kind of options I have available. I have a VGA female to DVI A male adaptor, I was wondering if it could work if I can hook it to a DVI A female to HDMI male adaptor and plug one monitor into the VGA out of the Geforce video card and the other through both adapters to the HDMI out. Any chance this could work? I was looking online for a VGA to HDMI live cable but it's kind of expensive.

    Read the article

  • Magical moving desktop icons

    - by Nathan Taylor
    I have encountered a very strange behavior in Windows 7 that I cannot seem to identify and I have never seen or heard of on any system configuration. Whenever I move my mouse to the left-most edge of my primary display (centered in 3-display setup), my desktop icons magically move away from the cursor (up or down and to the right). It only happens when my desktop has focus and the mouse is positioned on the left, top or bottom edge of the main display. Moving the mouse all the way to the right edge of my right secondary display causes the mouse icons to snap back into their correct position. Ridiculous video of the issue My setup is 3 displays on two display adapters. The main display is running at 2560x1600, connected to the machine via a USB-powered DVI-D to DisplayPort adapter and is driven by an NVIDIA NVS 3100M video card. The secondary displays are running at 1440x900 and 1200x1920 and are driven by integrated Intel HD Graphics (mobile). It seems like some kind of panning behavior, but it's obviously not working as expected. I have updated all of my drivers, but no change. It's probably worth noting that the desktop icons are set to auto-arrange.

    Read the article

  • Instructions to setup primary and only domain controller

    - by Robert Koritnik
    Where could I get best step by step instructions (with some simple explanations) how to setup domain controller on Windows Server 2008 R2 Server Core? I don't know what do I need? Do I need DNS as well and AD and so on and so forth. I don't know enough about these things, but I need to set them up to prepare development environment. I would also like to know how to configure firewall on DC machine, to make it visible on other machines because I've setup DC somehow but I can't connect to it... This is my HW config: Linksys internet router with DHCP my dev machine is Windows 7 my DC machine is a VM in my dev machine my dev machine has a hw network adapter to linksys and a virtual network adapter to DC DC machine has two network adapters: one to linksys (to be internet connected so it can be updated etc.) and one to host (my dev Win7 machine) Edit My development machine should access domain controller and logon using domain credentials. Development machine would access internet directly via Linksys router. My domain controller machine would only serve authentication (and if I'm able to configure it right) should also have Active Directory Federation Services in a workable condition. I hope this is a bit more clear now. At least a small bit.

    Read the article

  • Can a USB/IDE/SATA adapter be flaky?

    - by Ward
    I use USB/IDE/SATA converters a lot and on the two that I have now, I sometimes get errors copying files to drives. It only happens when I'm copying big files to the drive (big can mean as little as 100MB, I think it happens more often with bigger files - 300MB or more), and basically the copy will fail and I'll get one or more error messages about "Delayed write failed." But if I disconnect the drive and re-connect it, I'll usually be able to continue. (The file that was being copied will be corrupt, but otherwise the drive is fine.) I just noticed a new type of flakiness: the data transfer rate can vary widely. I copied one set of files (5x300MB files) and it took 10+minutes, then I copied another set (approx. the same sizes) and it took less than a minute. I haven't done systematic testing, the other things I'm doing on my laptop at the same time might have some impact, and I haven't cross-checked the two adapters I have and the 3 hard drives I'm working with to see if there's a pattern. I'm more wondering if anyone else has seen anything like this.

    Read the article

  • VMWare vSphere 5: 4 pNICs for iSCSI vs. 2 pNICs

    - by gravyface
    New SAN for me, never used before: it's an IBM DS3512, dual controller with a quad 1GbE NIC per controller that a client bought and needs help setting up. Hosts (x2) have 8 pNICs and while I usually reserve 2 pNICs for iSCSI per host (and 2 for VM, 2 for management, 2 for vMotion, staggered across adapters), these extra ports on the SAN have me wondering if storage I/O would be significantly improved with 2 additional NICs per host, or if the limitations of the vmkernel/initiator would prevent the additional multipaths from ever being realized. I'm not seeing alot of 4 pNIC iSCSI implementations per host; 2 is the de facto standard from what I've read/seen online. I could and probably will do some I/O testing, but just wondering if there's a "wall" that someone else has discovered long ago (i.e. before 10GbE) that makes a 4 NIC iSCSI per host setup somewhat pointless. Just to clarify: I'm not looking for a how-to, but an explanation (link to paper, VMWare recommendation, benchmark, etc.) as to why 2-NIC configurations are the norm vs. 4-NIC iSCSI configurations. i.e. storage vendor limitations, VMKernel/initiator limitations, etc.

    Read the article

  • Why can't a PC with 2 network cards be accessed by hostname?

    - by lewis
    I set up PC with 2 network cards, connected to the same LAN. I can connect to this PC (e.g. by remote desktop) only via ip-addresses. Accessing by hostname does not work. Why is this the case? UPDATE: Full environment 1. PC with 2 hardware network adapters. 2. On this PC installed VMWare Workstation. Created 3 VM's, networked by "bridged" network setting in VMWare. 3. In LAN all ip-addresses given from DHCP. 4. Win2k8 on all hosts (both physical and vitrual). As result: 1. PC has 2 ip-address (e.g. 192.168.1.71 and 192.168.1.72). PC available in LAN by ip-addreses, but not avail by hostname. 2. VM's has own ip-addr on each (e.g. 192.168.1.73, *74, *75 etc). They are available from LAN by their ip's, BUT not by their hostnames. How can I access to PC and to VM's by hostname?

    Read the article

  • What are the replacement options for an IDE hd for a DOS based system?

    - by dummzeuch
    I have got a few "embedded" systems running MSDOS 6.2 which boot from and store data to IDE hard disks. Since these drives are nearing their end of life, the question arises how we can replace them. The requirements are: DOS must be able to install and boot from these drives. They must be able to sustain heavy (mostly) write access. If possible, they should be able to survive moderate vibrations (not too bad since the current hds have survived several years of that) I considered the following options so far: other ide hard drives: Unfortunately modern IDE drives are too large so DOS cannot boot from them even if I create small partitions. Older IDE drives are just that: old, so they are probably not the most reliable ones any more. SSDs: There are a few SSDs with IDE interface available. I have not yet tried them. Does anybody have any experience with them? They look like the ideal replacement provided that DOS can boot from them and that writing speed does not deteriorate too much (the old hds are no race cars either). Compact Flash: There are adapters for using CF with IDE controllers and they work fine. DOS can boot from them and they have no problems at all with vibrations. What I am not sure about is their durability. DOS uses FAT so some very few sectors are written every time the medium is being written to. IDE to SATA converters: I have no idea whether they are any good. Has anybody tried them? It might be an option to use one of these to connect an SATA SSD to the system. Are there any alternatives that I have missed? (We are working on replacing these systems, but it will still take a few years.)

    Read the article

  • Bypass network stack. Which options do we have? Pros and cons of each option [on hold]

    - by javapowered
    I'm writing trading application. I want to bypass network stack in Linux but I don't know how this can be done. I'm looking for complete list of options with pros and cons of each of them. The only option I know - is to buy solarflare network card which supports OpenOnLoad. What other options should I consider and what is pros and cons of each of them? Well the question is pretty simple - what is the best way to bypass network stack? upd: OpenOnload It achieves performance improvements in part by performing network processing at user-level, bypassing the OS kernel entirely on the data path. Intel DDIO to allow Intel® Ethernet Controllers and adapters to talk directly with the processor cache of the Intel® Xeon® processor E5. What's key difference between these techologies? Do they do roughly the same things? I much better like Intel DDIO because it's much easy to use, but OpenOnload required a lot of installation and tuning. If good OpenOnload application is much faster than good Intel DDIO application?

    Read the article

  • Low-profile, PCI Express, x1 video card with VGA-out?

    - by Dandy
    I just bought an Acer Aspire EasyStore H340 system (http://us.acer.com/acer/productv.do?LanguageISOCtxParam=en&kcond61e.c2att101=54825&sp=page16e&ctx2.c2att1=25&link=ln438e&CountryISOCtxParam=US&ctx1g.c2att92=450&ctx1.att21k=1&CRC=936243954) It comes with Windows Home Server, which I don't particularly care for (too dumbed down for my liking)--I bought the box mainly for the form factor, and intend to install Server 2008 on it and have it run as a small domain controller. The geniuses at Acer however went out of their way to ensure you can only run Home Server--you can only connect to it via the Home Server Connector software, as it has no video-out whatsoever (so essentially, there's no way to even get into the BIOS). It only has a low-profile, PCI Express x1 slot. It turns out to be way harder than I thought to locate a video card that both has an x1 connector, and is low-profile (I'd really rather not snip the bracket at the back just so it'll fit the case). I know they're out there, and I've seen one with Display Port outputs, but I don't have a monitor with this connection. So to reiterate, it needs to be: - x1 connector - low profile - VGA out (though DVI would be okay; I have some spare adapters) Can anyone recommend anything at all?

    Read the article

  • Logging communication between two VMs

    - by sYnfo
    Hi, I'm trying to set up "malware lab" described in this paper. So far, I've set up Windows guest system, adding one Host-only Network adapter, and setting this (sorry if the names aren't exactely correct, I don't have an english language version): - IP Address - 10.0.0.3 - Subnet mask - 255.255.255.0 - Default gateway - not set - Preferred DNS - 10.0.0.4 - Alternate DNS - not set And a Linux guest system - Ubuntu 9.04 - with two Network adapters - Bridged (eth0) and Host-only (eth1), and setting eth1 IP Address to 10.0.0.4, leaving the eth0 to be set by DHCP. Then, I have configured iptables as described in the paper, ie.: iptables -F -t nat iptables -F -t mangle iptables -t mangle -P PREROUTING ACCEPT iptables -t mangle -P OUTPUT ACCEPT iptables -t nat -P PREROUTING ACCEPT iptables -t nat -P POSTROUTING ACCEPT iptables -t nat -P OUTPUT ACCEPT iptables -t mangle -A PREROUTING -i eth0 -j ACCEPT iptables -t mangle -A PREROUTING -p udp -i eth1 -d 10.0.0.3 --dport 53 -j ACCEPT iptables -t mangle -A PREROUTING -p tcp -i eth1 --dport 80 -j ACCEPT iptables -t mangle -A PREROUTING -p tcp -i eth1 -d 10.0.0.3 --dport 6000:7000 -j ACCEPT iptables -t mangle -A PREROUTING -i eth1 -j ULOG iptables -t mangle -A PREROUTING -i eth1 -j DROP Now, when I try to ping the windows system from within the Linux system, it does not reply, I guess thats perfectly normal, because iptables is blocking ping responce. Same when I try to ping the Linux system from within the Windows. But when I try to access any web page from within the Windows system, I would expect that this action should get logged by iptables. But thing is, I don't see any of that kind of lines in log file (If I am looking in the right place, that is. :) It is at /var/log/messages, isn't it?). So, what do you think might be the problem here? I should note, that this is the first time I'm using linux, so don't expect ANY working knowledge of Linux at all... :) Also, since english is not my mother tongue, feel free to point out any gramatical mistakes... :) Thanks for any advice.

    Read the article

  • Increasing link speed on OpenVPN (bandwidth)

    - by Mike
    I have bought a tunnel service by using OpenVPN. For a year I've had 10 Mbps max upload/download speed but now I've bought an additional 20 Mbps making the available total bandwidth 30 Mbps for me. On their homepage there are some controls available for me, for example to restart the tunnel. I've done that. It also says that the speed has indeed been upgraded to 30 Mbps on their page. I also got an email that said they have upgraded the speed. However after I reboot my machine, and OpenVPN has started up and is running as usual, when I look at the Windows Task Manager (opens when pressing CTRL+SHIFT+ESC) in the "Networking" tab I still have a link speed of only 10 Mbps. Two adapters are listed: Local Area Connection 4 (10 Mbps) and Local Area Connection 5 (100 Mbps). LAC5 is my "real" adapter, I have a 100 Mbps Internet connection if I don't use a tunnel. LAC3 is the virtual adapter used by OpenVPN. The problem is that it is still showing 10 Mbps even though I have upgraded to 30 Mbps. How can I fix this?

    Read the article

  • Video adapter problem on new motherboard

    - by Dmitriy Matveev
    Something bad happened to my PC several days ago. I wasn't near my PC, so I have no idea about what happened it was just halted. When I tried to boot it was entering infinite loops of a few seconds power up (cpu, hdds, etc) and then power down. I've tried to boot the system with no additional components (that includes hdd, video, network adapters and even memory) connected and that didn't solved the problem, so I've made a decision that most likely it's either some a problem with power unit or with motherboard. I've tried to replace my power unit by another one (which was expected to be working) and the problem didn't resolved again. I've bought a new MB (ASUS P5KPL-AM SE) and tried to get it running with my old CPU and memory (I hope it's still alive). Since this MB include on-board video I've tried to run the PC without installation of mine video. The PC wasn't running and the BIOS was beeping one long signal following by two short (Does it means a video problem?). After that I've installed my video adapter to PCI-E slot and tried to boot the system again and the BIOS was beeping the same. I don't get it. I may expect some problem with CPU and/or memory since I don't know what happened to my PC (maybe some power failure or something different), but not with video and not with on-board video on newly bought MB. How can I understand what's wrong with my system now?

    Read the article

  • Display on secondary video card (Nvidia 8400 GS): horrible refresh, bogs system

    - by minameismud
    This is my work computer, but it's a small shop. We do business software development. The most hardcore thing we create is some web animations with html5 and fancy javascript/css. The base machine is a Dell Precision T3500 - Xeon W3550 (3.07GHz quad), 6GB ram, pair of 500GB harddrives, and Win 7 x64 Enterprise SP1. My primary video card is an ATI FirePro V4800 1GB in a PCIe slot of some speed driving a pair of 23s at 1920x1080 through DisplayPort-HDMI adapters. The secondary card is an NVidia GeForce 8400GS in a PCI slot driving a single 17" at 1280x1024 through DVI. On either of the 23" monitors, windows move smoothly, scroll quickly, and are generally very responsive. On the 17", it's slow, chunky, and when I'm trying to scroll a ton of content, Windows will occasionally suggest I drop to the Windows Basic theme. I've updated drivers for both cards, and I've gotten every Windows update relating to video. Specifically: ATI FirePro Provider: Advanced Micro Devices, Inc Date: 6/22/2014 Version: 13.352.1014.0 NVidia 8400 GS Provider: NVIDIA Date: 7/2/2014 Version: 9.18.13.4052 Unfortunately, new hardware isn't really an option. Is there anything I can do software-wise to speed up the NVidia-driven monitor?

    Read the article

  • The Complete List of iPad Tips, Tricks, and Tutorials

    - by Ross
    The Apple iPad is the latest new toy, and we’ve put together a comprehensive list of every tip, trick, and tutorial that we could find to help you get the most out of it—and we’re even giving one away to one lucky reader. So read on! Note: We’ll be keeping this page updated as we find more great articles, so you should bookmark this page for future reference. Want Your Own iPad? How-To Geek is Giving One Away! All you have to do to enter is become a fan of our Facebook page, and we’ll pick a random fan to win the prize. Win an iPad on the How-To Geek Facebook Fan Page Disable the “clicking sound” on the iPad Keyboard Does the clicking sound when you tap the iPad keyboard bother you? Thankfully it’s easy to disable with a couple of taps. How to disable the “clicking sound” on your iPad’s keyboard Enable and add bookmarks to the Safari Bookmarks Bar on your iPad By default, Safari doesn’t display the Bookmarks Bar. This tip shows you how to change that. How to enable and add bookmarks to the Safari Bookmarks Bar on your iPad Clear the Cache, History and Cookies in Safari for the iPad You’re probably used to clearing this kind of data right from within the browser. Not so with Safari on the iPad – but here’s how you can. How to clear the cache, history and cookies in Safari for iPad How to add more Apps to your iPad Dock The iPad has four icons in its ‘dock’. Did you know it can hold 6? How to add more Apps to your iPad Dock Convert PDF files to ePub files to read on your iPad with iBooks ePub is the format that iBooks are in. So for those of you with large eBook collections in PDF, here’s how you convert them to read in iBooks. How to convert PDF files to ePub files to read on your iPad with iBooks How to force your iPad to restart Has an app caused your iPad to freeze up, and you can’t escape? This tip shows you how to force your iPad to restart. How to force your iPad to restart How to export Keynote for iPad presentations to your Mac or PC Exporting Keynote presentations from your iPad to your Mac or PC isn’t as straight forward as you might have expected. This tutorial shows you how. How to export Keynote for iPad presentations to your Mac or PC How to import presentations to Keynote on your iPad Having trouble getting your presentations onto your iPad? How to import presentations to Keynote on your iPad How to import documents to Pages on your iPad This guide shows you how to transfer documents (MS Word or Pages) from your Mac/PC to your iPad. How to import documents to Pages on your iPad How to insert photos in a Pages document using iPad and share it as a PDF Want to spice up that doc with a picture you just took? This tutorial will show you how – and how to export that document as a PDF. How to insert photos in a Pages document using iPad and share it as a PDF How to lock your iPad If you have kids or co-workers/friends who think it’s funny to mess with your iPad – lock it. How to lock your iPad How to remove the “Sent from my iPad” signature from outgoing email on your iPad Does everyone need to know you just sent that email from your iPad? Probably not. This guide shows you how to remove the “Sent from my iPad” signature and replace it with your own (or none). How to remove the “Sent from my iPad” signature from outgoing email on your iPad How To Sync Multiple Calendars to the iPad With Google Sync This tutorial will show you a workaround on how to sync multiple calendars on your iPad using Google Sync. How to Sync Multiple Calendars to the iPad With Google Sync How to determine the MAC address of your iPad If your network restricts connections via MAC address – this guide will show you how to determine what yours is. How to determine the MAC address of your iPad How to take a screenshot of your iPad Do you need to take a screenshot of your iPad? This quick tip shows you how to do just that. How to take a screenshot of your iPad How to delete apps from your iPod Touch, iPhone or iPad Anyone who had an iPod Touch or iPhone before they had an iPad won’t need this tutorial. But if you’re new to the experience, this one will help. How to delete apps from your iPod Touch, iPhone or iPad How to determine the iPad ECID on Windows and Mac iPadintosh shows us how to determine the iPad’s ECID code – something you’ll want to have come Jailbreak time. How to grab the iPad ECID in Windows or OS X iPad Apps: Twitter and social networking essentials Enggadget has you covered with reviews of the first slew of iPad specific Twitter and other social networking apps. iPad Apps: Twitter and social networking essentials What does your website look like on an iPad? iPad Peek is a web based tool that allows you to enter any given URL, and it will display that page the same way Safari on the iPad does. Great for web site owners who don’t have access to an iPad. iPadPeek Stream Music and Videos to your iPad Gizmodo reviews the iPad app StreamToMe, which allows you to stream media from your Mac to your iPad across your local network. Their feelings in a nutshell – worth the $3, but not perfect. Review: StreamToMe for the iPad Apple iPad : Change links in Google Reader to point to full HTML webpage How to change links in Safari for iPad so that Google Reader points to a full HTML webpage How to connect an iPad to your existing wireless keyboard This video will show you how to connect your iPad to a wireless keyboard if you’re having any problems – and from the sound of things, quite a few folks are. via TUAW How to get started with the iPad Mashable has a very entry-level guide that will help you set up your iPad for the first time. Mashable’s Guide to Setting up the iPad Essential iPad Apps Downloadsquad gives mini-reviews to 8 iPad apps that you should install as soon as you get your iPad. iPad App Buyers Guide: Essential Apps you should get on day one Videos: The Official iPad Guided Tours From none other than Apple! Great getting started videos for all the included iPad apps. The Official iPad Guided Tours The Official iPad Manual When you buy an iPad, you don’t get a manual. But that’s not to say there isn’t one. Apple provides a 150 guide for your iPad in PDF format. The Official iPad Manual (pdf) How to print from your iPad Sure, it’s actually just an App (PrintCentral – $9.99 USD), but as of right now, it’s the only way. PrintCentral How to make your own iPad Wallpaper A perfectly detailed tutorial on how to make your own wallpaper for your iPad. The author also provides a really nice sample wallpaper, published under the Attribution-Noncommercial 2.0 Generic license. How to make your own iPad Wallpaper Got any more tips? Share them in the comments, and we’ll update the post with the links, or just the tip itself. Similar Articles Productive Geek Tips Want an iPad? How-To Geek is Giving One Away!Why Wait? Amazing New Add-on Turns Your iPhone into an iPad! [Comic]Clear the Auto-Complete Email Address Cache in OutlookAsk the Readers: Share Your Tips for Defeating Viruses and MalwareStupid Geek Tricks: Tile or Cascade Multiple Windows in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Are You Blocked On Gtalk? Find out Discover Latest Android Apps On AppBrain The Ultimate Guide For YouTube Lovers Will it Blend? iPad Edition Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos

    Read the article

  • Install Ubuntu Netbook Edition with Wubi Installer

    - by Matthew Guay
    Ubuntu is one of the most popular versions of Linux, and their Netbook Remix edition is especially attractive for netbook owners.  Here we’ll look at how you can easily try out Ubuntu on your netbook without a CD/DVD drive. Netbooks, along with the growing number of thin, full powered laptops, lack a CD/DVD drive.  Installing software isn’t much of a problem since most programs, whether free or for-pay, are available for download.  Operating systems, however, are usually installed from a disk.  You can easily install Windows 7 from a flash drive with our tutorial, but installing Ubuntu from a USB flash drive is more complicated.  However, using Wubi, a Windows installer for Ubuntu, you can easily install it directly on your netbook and even uninstall it with only a few clicks. Getting Started Download and run the Wubi installer for Ubuntu (link below).  In the installer, select the drive you where you wish to install Ubuntu, the size of the installation (this is the amount dedicated to Ubuntu; under 20Gb should be fine), language, username, and desired password.  Also, from the Desktop environment menu, select Ubuntu Netbook to install the netbook edition.  Click Install when your settings are correct. Wubi will automatically download the selected version of Ubuntu and install it on your computer. Windows Firewall may ask if you want to unblock Wubi; select your network and click Allow access. The download will take around an hour on broadband, depending on your internet connection speed.  Once the download is completed, it will automatically install to your computer.  If you’d prefer to have everything downloaded before you start the install, download the ISO of Ubuntu Netbook edition (link below) and save it in the same folder as Wubi. Then, when you run Wubi, select the netbook edition as before and click Install.  Wubi will verify that your download is valid, and will then proceed to install from the downloaded ISO.  This install will only take about 10 minutes. Once the install is finished you will be asked to reboot your computer.  Save anything else you’re working on, and then reboot to finish setting up Ubuntu on your netbook. When your computer reboots, select Ubuntu at the boot screen.  Wubi leaves the default OS as Windows 7, so if you don’t select anything it will boot into Windows 7 after a few seconds. Ubuntu will automatically finish the install when you boot into it the first time.  This took about 12 minutes in our test. When the setup is finished, your netbook will reboot one more time.  Remember again to select Ubuntu at the boot screen.  You’ll then see a second boot screen; press your Enter key to select the default.   Ubuntu only took less than a minute to boot in our test.  When you see the login screen, select your name and enter your password you setup in Wubi.  Now you’re ready to start exploring Ubuntu Netbook Remix. Using Ubuntu Netbook Remix Ubuntu Netbook Remix offers a simple, full-screen interface to take the best advantage of netbooks’ small screens.  Pre-installed applications are displayed in the application launcher, and are organized by category.  Click once to open an application. The first screen on the application launcher shows your favorite programs.  If you’d like to add another application to the favorites pane, click the plus sign beside its icon. Your files from Windows are still accessible from Ubuntu Netbook Remix.  From the home screen, select Files & Folders on the left menu, and then click the icon that says something like 100GB Filesystem under the Volumes section. Now you’ll be able to see all of your files from Windows.  Your user files such as documents, music, and pictures should be located in Documents and Settings in a folder with your user name. You can also easily install a variety of free applications via the Software Installer. Connecting to the internet is also easy, as Ubuntu Netbook Remix automatically recognized the WiFi adaptor on our test netbook, a Samsung N150.  To connect to a wireless network, click the wireless icon on the top right of the screen and select the network’s name from the list. And, if you’d like to customize your screen, right-click on the application launcher and select Change desktop background. Choose a background picture you’d like. Now you’ll see it through your application launcher.  Nice! Most applications are opened full-screen.  You can close them by clicking the x on the right of the program’s name. You can also switch to other applications from their icons on the top left.  Open the home screen by clicking the Ubuntu logo in the far left. Changing Boot Options By default, Wubi will leave Windows as the default operating system, and will give you 10 seconds at boot to choose to boot into Ubuntu.  To change this, boot into Windows and enter Advanced system settings in your start menu search. In this dialog, click Settings under Startup and Recovery. From this dialog, you can select the default operating system and the time to display list of operating systems.  You can enter a lower number to make the boot screen appear for less time. And if you’d rather make Ubuntu the default operating system, select it from the drop-down list.   Uninstalling Ubuntu Netbook Remix If you decide you don’t want to keep Ubuntu Netbook Remix on your computer, you can uninstall it just like you uninstall any normal application.  Boot your computer into Windows, open Control Panel, click Uninstall a Program, and enter ubuntu in the search box.  Select it, and click Uninstall. Click Uninstall at the prompt.  Ubuntu uninstalls very quickly, and removes the entry from the bootloader as well, so your computer is just like it was before you installed it.   Conclusion Ubuntu Netbook Remix offers an attractive Linux interface for netbooks.  We enjoyed trying it out, and found it much more user-friendly than most Linux distros.  And with the Wubi installer, you can install it risk-free and try it out on your netbook.  Or, if you’d like to try out another alternate netbook operating system, check out our article on Jolicloud, another new OS for netbooks. Links Download Wubi Installer for Windows Download Ubuntu Netbook Edition Similar Articles Productive Geek Tips Easily Install Ubuntu Linux with Windows Using the Wubi InstallerInstall VMware Tools on Ubuntu Edgy EftHow to install Spotify in Ubuntu 9.10 using WineInstalling PHP5 and Apache on UbuntuInstalling PHP4 and Apache on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam Boot Windows Faster With Boot Performance Diagnostics

    Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >