Search Results

Search found 46442 results on 1858 pages for 'aaa super'.

Page 151/1858 | < Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >

  • How can I troubleshoot a "Hardware Malfunction" blue screen?

    - by AaronSieb
    My computer has suddenly started crashing to a blue screen with the following text: hardware malfunction call your hardware vendor for support *the system has halted* The crash occurs randomly during normal use. I have thus far always been able to reproduce it by transferring the contents of a large folder... But I'm not sure if this is caused by the file transfer, or simply because the transfer takes long enough for something else to trigger it. A bit about my hardware I have an dual core Intel CPU, and Asus motherboard. Video card is by nVidia, and connects via PCIe. My hard drives are in pairs, and connect via SATA to a RAID controller on the motherboard. They are configured to use a RAID0 configuration. What I've tried so far There is nothing in the Windows Event Log. WhoCrashed was unable to find any crash records. ScanDisk runs to completion (it launches prior to Windows load) and reports no errors. MemTest reports no errors (to 200% coverage). System temperatures are in the range of 40 to 50 degrees Celsius, with video card temperatures in the range of 60 to eighty degrees Celsius. I have stripped the system down to a minimal configuration (hard drive, video card, one memory module, motherboard, CPU, power supply). The problem still occurrs. However, this has allowed me to rule out a few components: It is not the video card because the problem still occurred after replacing the video card another one I had on hand. It is not the hard drive or anything software related because the problem occurred after a fresh installation of Windows on a replacement hard drive. It is not the hard drive cables because I replaced those with new ones and still had the problem. It is not the power supply because the problem still occurred after replacing the power supply with another one I had on hand. It is probably not the memory because I've tried three different memory modules in three different memory slots and was still able to replicate the issue. Is there anything I can do to confirm what's causing the issue? At the moment it seems as though it must be either the motherboard or CPU, but those are both difficult components to replace... In addition, both components are relatively new (two to three years old). I will gladly edit in any additional information I can get my hands on, and/or focus the question as I can find more details...

    Read the article

  • sudoers file cleanup and consolidation tool/script

    - by Prashanth Sundaram
    Hello All, I am curious to know what other folks out there might be using to keep the sudoers file in a sane manner. I am looking for a tool, that removes redundant entries, overlapping permissions and/or present sudoers file in a organized way(like sorting by permissions/users/Aliases). I use SVN and Confi Mgmt. tool to version control and deploy resp. Is there any add-on/plugin you would recommend/use? User_Alias RT1123 jappleseed, sjobs Host_Alias HOST_RT1123 wdc101.domain.com, wdc104.domain.com Cmnd_Alias ..... Our sudoers file is simple but a lot of entries and it needs to be cleaned up. Does anyone know/have a tool/script to fix/present it ? Thanks!

    Read the article

  • Pidgin getting "Connection Refused" whenever I connect to IRC server

    - by tvanover
    On my win 7 x64 machine using pidgin 2.6.3 I cannot connect to any IRC server. I have tried most of the North American servers, as well as my workplace's internal server with no luck. I have tried from work as well as from home but different networks have no effect. I keep getting Unable to Connect: Connection refused. It work fine 3 weeks ago on this very machine running Win 7 x64. But then I re-imaged, and did not backup my .purple folder. Which I had used for the past 2 years and originally created on a vista install. I can connect using this install of Pigin to yahoo and msn with no problems. Just not to irc. Any thoughts?

    Read the article

  • Why do I get error 0x0070004 when trying to update to Windows 8.1 from Windows 8?

    - by Jeffrey Lin
    So, I'm trying to update Windows 8 to Windows 8.1 via the Windows Store, but every time I attempt to, the update downloads properly, but then I get the error: Windows 8.1 This app wasn't installed - view details When I click on it, it says: Something happened and the Windows 8.1 could not be installed. Please try again. Error code: 0x80070004 Try again Cancel Install What does this mean? A quick Google search yields nothing. I have tried rebooting, clearing the store cache, and resetting Windows Update. A quick chkdsk scan shows no errors. A SFC scan shows that there are many issues. http://pastebin.com/TZiH8ZXZ Could this be the issue? I found the error log! http://pastebin.com/BXZEsejm Why is the registry corrupt?

    Read the article

  • PC hangs and reboots from time to time

    - by Bevor
    Hello, I have a very strange problem: Since I have my new PC, I have always had problems with it. From time to time the computer freezes for some seconds and suddendly reboots by itself. I've had this problem since Ubuntu 9.10. The same with 10.04 and 10.10. That's why I don't think it's a software failure because the problem persist too long. It doesn't have anything to do with what I'm doing at this time. Sometimes I listen to music, sometimes I only use Firefox, sometimes I'm running 2 or 3 VMs, sometimes I watch DVD. So it's not isolatable. I could freeze once a day or once a week. I put the PC to the vendor twice(!). The first time they changed my power supply but the problem persisted. The second time they told me that they made some heavy performance tests 50 hours long but they didn't find anything. (How can that be that I have daily freezes with normal usage). The vendor didn't check the hard discs because they used their own disc with Windows. (So they never checked the Linux installation). Yesterday I made some intensive hard disc scans with "SMART" but no errors were found. I ran memtest for 3 times but no errors found. I already had this problem in my old flat, so I doubt that I has something to do with current fluctuation. I already tried another electrical socket and changed to connector strip but the problem persists. At the moment I removed 2 of the RAMs (2x 2GB). In all I have 6GB, 2x2GB and 2x1GB. Could this difference maybe be a problem? Here is a list of my components. I hope that anybody find something I didn't think about yet. And here a list of my components: 1x AMD Phenom II X4 965 Black Edition, 3,4Ghz, Quad Core, S-AM3, Boxed 2x DDR3-RAM 2048MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x DDR3-RAM 1024MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x SATA II Seagate Barracuda 7200.12, 1TB 32MB Cache = RAID 1 1x DVD ROM SATA LG DH16NSR, 16x/52x 1x DVD-+R/-+RW SATA LG GH-22NS50 1x Cardreader 18in1 1x PCI-E 2.0 GeForce GTS 250, Retail, 1024MB 1x Power Supply ATX 400 Watt, CHIEFTEC APS-400S, 80 Plus 1x Network card PCI Intel PRO/1000GT 10/100/1000 MBit 1x Mainboard Socket-AM3 ASUS M4A79XTD EVO, ATX lshw: description: Desktop Computer product: System Product Name vendor: System manufacturer version: System Version serial: System Serial Number width: 64 bits capabilities: smbios-2.5 dmi-2.5 vsyscall64 vsyscall32 configuration: boot=normal chassis=desktop uuid=80E4001E-8C00-002C-AA59-E0CB4EBAC29A *-core description: Motherboard product: M4A79XTD EVO vendor: ASUSTeK Computer INC. physical id: 0 version: Rev X.0X serial: MT709CK11101196 slot: To Be Filled By O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 0704 (11/25/2009) size: 64KiB capacity: 960KiB capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification *-cpu description: CPU product: AMD Phenom(tm) II X4 965 Processor vendor: Advanced Micro Devices [AMD] physical id: 4 bus info: cpu@0 version: AMD Phenom(tm) II X4 965 Processor serial: To Be Filled By O.E.M. slot: AM3 size: 800MHz capacity: 3400MHz width: 64 bits clock: 200MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 512KiB capacity: 512KiB capabilities: pipeline-burst internal varies data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 2MiB capacity: 2MiB capabilities: pipeline-burst internal varies unified *-cache:2 description: L3 cache physical id: 7 slot: L3-Cache size: 6MiB capacity: 6MiB capabilities: pipeline-burst internal varies unified *-memory description: System Memory physical id: 36 slot: System board or motherboard size: 2GiB *-bank:0 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber00 vendor: Manufacturer00 physical id: 0 serial: SerNum00 slot: DIMM0 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber01 vendor: Manufacturer01 physical id: 1 serial: SerNum01 slot: DIMM1 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: DIMM [empty] product: ModulePartNumber02 vendor: Manufacturer02 physical id: 2 serial: SerNum02 slot: DIMM2 *-bank:3 description: DIMM [empty] product: ModulePartNumber03 vendor: Manufacturer03 physical id: 3 serial: SerNum03 slot: DIMM3 *-pci:0 description: Host bridge product: RD780 Northbridge only dual slot PCI-e_GFX and HT1 K8 part vendor: ATI Technologies Inc physical id: 100 bus info: pci@0000:00:00.0 version: 00 width: 32 bits clock: 66MHz *-pci:0 description: PCI bridge product: RD790 PCI to PCI bridge (external gfx0 port A) vendor: ATI Technologies Inc physical id: 2 bus info: pci@0000:00:02.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:a000(size=4096) memory:f8000000-fbbfffff ioport:d0000000(size=268435456) *-display description: VGA compatible controller product: G92 [GeForce GTS 250] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:18 memory:fa000000-faffffff memory:d0000000-dfffffff memory:f8000000-f9ffffff ioport:ac00(size=128) memory:fbbe0000-fbbfffff *-pci:1 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port C) vendor: ATI Technologies Inc physical id: 6 bus info: pci@0000:00:06.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:b000(size=4096) memory:fbc00000-fbcfffff ioport:f6f00000(size=1048576) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: e0:cb:4e:ba:c2:9a size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:45 ioport:b800(size=256) memory:f6fff000-f6ffffff memory:f6ff8000-f6ffbfff memory:fbcf0000-fbcfffff *-pci:2 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port D) vendor: ATI Technologies Inc physical id: 7 bus info: pci@0000:00:07.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:c000(size=4096) memory:fbd00000-fbdfffff *-firewire description: FireWire (IEEE 1394) product: VT6315 Series Firewire Controller vendor: VIA Technologies, Inc. physical id: 0 bus info: pci@0000:03:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress ohci bus_master cap_list configuration: driver=firewire_ohci latency=0 resources: irq:19 memory:fbdff800-fbdfffff ioport:c800(size=256) *-pci:3 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port E) vendor: ATI Technologies Inc physical id: 9 bus info: pci@0000:00:09.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:43 ioport:d000(size=4096) memory:fbe00000-fbefffff *-ide description: IDE interface product: 88SE6121 SATA II Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 version: b2 width: 32 bits clock: 33MHz capabilities: ide pm msi pciexpress bus_master cap_list configuration: driver=pata_marvell latency=0 resources: irq:17 ioport:dc00(size=8) ioport:d880(size=4) ioport:d800(size=8) ioport:d480(size=4) ioport:d400(size=16) memory:fbeffc00-fbefffff *-storage description: SATA controller product: SB700/SB800 SATA Controller [IDE mode] vendor: ATI Technologies Inc physical id: 11 bus info: pci@0000:00:11.0 logical name: scsi0 logical name: scsi2 version: 00 width: 32 bits clock: 66MHz capabilities: storage msi ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=64 resources: irq:44 ioport:9000(size=8) ioport:8000(size=4) ioport:7000(size=8) ioport:6000(size=4) ioport:5000(size=16) memory:f7fffc00-f7ffffff *-disk:0 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: CC38 serial: 9VP3WD9Z size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@0:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@0:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-disk:1 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 1 bus info: scsi@2:0.0.0 logical name: /dev/sdb version: CC38 serial: 9VP3SCPF size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@2:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@2:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@2:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-usb:0 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 12 bus info: pci@0000:00:12.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffd000-f7ffdfff *-usb:1 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 12.1 bus info: pci@0000:00:12.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffe000-f7ffefff *-usb:2 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 12.2 bus info: pci@0000:00:12.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:17 memory:f7fff800-f7fff8ff *-usb:3 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 13 bus info: pci@0000:00:13.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffb000-f7ffbfff *-usb:4 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 13.1 bus info: pci@0000:00:13.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffc000-f7ffcfff *-usb:5 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 13.2 bus info: pci@0000:00:13.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:19 memory:f7fff400-f7fff4ff *-serial UNCLAIMED description: SMBus product: SBx00 SMBus Controller vendor: ATI Technologies Inc physical id: 14 bus info: pci@0000:00:14.0 version: 3c width: 32 bits clock: 66MHz capabilities: ht cap_list configuration: latency=0 *-ide description: IDE interface product: SB700/SB800 IDE Controller vendor: ATI Technologies Inc physical id: 14.1 bus info: pci@0000:00:14.1 logical name: scsi5 version: 00 width: 32 bits clock: 66MHz capabilities: ide msi bus_master cap_list emulated configuration: driver=pata_atiixp latency=64 resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff00(size=16) *-cdrom:0 description: DVD reader product: DVDROM DH16NS30 vendor: HL-DT-ST physical id: 0.0.0 bus info: scsi@5:0.0.0 logical name: /dev/cdrom1 logical name: /dev/dvd1 logical name: /dev/scd0 logical name: /dev/sr0 version: 1.00 capabilities: removable audio dvd configuration: ansiversion=5 status=nodisc *-cdrom:1 description: DVD-RAM writer product: DVDRAM GH22NS50 vendor: HL-DT-ST physical id: 0.1.0 bus info: scsi@5:0.1.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd1 logical name: /dev/sr1 version: TN02 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-multimedia description: Audio device product: SBx00 Azalia (Intel HDA) vendor: ATI Technologies Inc physical id: 14.2 bus info: pci@0000:00:14.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=64 resources: irq:16 memory:f7ff4000-f7ff7fff *-isa description: ISA bridge product: SB700/SB800 LPC host controller vendor: ATI Technologies Inc physical id: 14.3 bus info: pci@0000:00:14.3 version: 00 width: 32 bits clock: 66MHz capabilities: isa bus_master configuration: latency=0 *-pci:4 description: PCI bridge product: SBx00 PCI to PCI Bridge vendor: ATI Technologies Inc physical id: 14.4 bus info: pci@0000:00:14.4 version: 00 width: 32 bits clock: 66MHz capabilities: pci subtractive_decode bus_master resources: ioport:e000(size=4096) memory:fbf00000-fbffffff *-network description: Ethernet interface product: 82541PI Gigabit Ethernet Controller vendor: Intel Corporation physical id: 5 bus info: pci@0000:05:05.0 logical name: eth1 version: 05 serial: 00:1b:21:56:f3:60 size: 100MB/s capacity: 1GB/s width: 32 bits clock: 66MHz capabilities: pm pcix bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k6-NAPI duplex=full firmware=N/A ip=192.168.1.2 latency=64 link=yes mingnt=255 multicast=yes port=twisted pair speed=100MB/s resources: irq:20 memory:fbfe0000-fbffffff memory:fbfc0000-fbfdffff ioport:ec00(size=64) memory:fbfa0000-fbfbffff *-usb:6 description: USB Controller product: SB700/SB800 USB OHCI2 Controller vendor: ATI Technologies Inc physical id: 14.5 bus info: pci@0000:00:14.5 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffa000-f7ffafff *-pci:1 description: Host bridge product: Family 10h Processor HyperTransport Configuration vendor: Advanced Micro Devices [AMD] physical id: 101 bus info: pci@0000:00:18.0 version: 00 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Family 10h Processor Address Map vendor: Advanced Micro Devices [AMD] physical id: 102 bus info: pci@0000:00:18.1 version: 00 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Family 10h Processor DRAM Controller vendor: Advanced Micro Devices [AMD] physical id: 103 bus info: pci@0000:00:18.2 version: 00 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Family 10h Processor Miscellaneous Control vendor: Advanced Micro Devices [AMD] physical id: 104 bus info: pci@0000:00:18.3 version: 00 width: 32 bits clock: 33MHz configuration: driver=k10temp resources: irq:0 *-pci:5 description: Host bridge product: Family 10h Processor Link Control vendor: Advanced Micro Devices [AMD] physical id: 105 bus info: pci@0000:00:18.4 version: 00 width: 32 bits clock: 33MHz *-scsi physical id: 1 bus info: usb@2:3 logical name: scsi8 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk:0 description: SCSI Disk physical id: 0.0.0 bus info: scsi@8:0.0.0 logical name: /dev/sdc *-disk:1 description: SCSI Disk physical id: 0.0.1 bus info: scsi@8:0.0.1 logical name: /dev/sdd *-disk:2 description: SCSI Disk physical id: 0.0.2 bus info: scsi@8:0.0.2 logical name: /dev/sde *-disk:3 description: SCSI Disk physical id: 0.0.3 bus info: scsi@8:0.0.3 logical name: /dev/sdf *-network DISABLED description: Ethernet interface physical id: 1 logical name: vboxnet0 serial: 0a:00:27:00:00:00 capabilities: ethernet physical configuration: broadcast=yes multicast=yes

    Read the article

  • Shortcut to offline folder

    - by Diego
    Is there a way to create a shortcut to a folder or file marked as "Always available offline" so it can be open directly when offline? A simple shortcut doesn't seem to work; I have to go through Manage Offline Files → View your offline files → Mapped Network Drives → etc

    Read the article

  • Growing the size of a VM's disk in VMware

    - by soandos
    I have a VM that I originally gave 10 GB to (using VMware workstation, and Ubuntu 11.10 is the guest OS). I now wish to add to that. I have seen the option to expand the disk size, but all that does is create a new "partition" that Ubuntu can see. Is there a way to expand the size of the primary partition that the guest OS is using? NOTE: I have seen something regarding doing this for a regular Ubunbu OS that requires a boot disk. Is there a way that I can apply that to this VM case? Using Windows 7 64-bit as the host OS EDIT: To be clear, I am trying to resize the boot partition. Edit 2: GParted's resize option is greyed out.

    Read the article

  • 2-Bay External HDD Enclosure in JBOD mode fails to detect both drives (Linux & Windows)

    - by mgc8888
    I recently purchased a couple of USB 3.0 External HDD Enclosures to use for storage and backup; the idea was to have one act as backup to the other, with 4 x 3TB drives in total. However, the second drive in each is not accessible in either Linux nor Windows, and I could not determine the reason. 1. Situation The two enclosures are slightly different (couldn't find them in stock at the same time) yet from many little details appear to be the same Chinese base design with a tweaked outer shell. The models are: Sharkoon 2-Bay RAID Box Fantec MR-35DU3 The drives are Seagate 3TB Barracuda ST33000651AS, firmware CC44, all identical. From reading manuals and online sources, I determined that JBOD would be the optimal setup for my needs -- addressing the two drives separately in each enclosure would be important, making it easy to swap drives and mix&match them if needed; all the other modes implied the controller doing a combination of the drives. The software used was Debian GNU/Linux - testing/wheezy - kernel 2.6.39-2 and Windows 7 Ultimate. 2. Description of the problem Now, here comes the problem: every time I connect either of the enclosures to a PC using the supplied cable (tried a different one as well), only the HDD in the top bay is readable, the one below is detected yet errors out in various ways. According to the manuals, it should not happen: in JBOD, the system should be able to "see" two separate drives upon connection. This happens with both enclosures and any combination of HDDs (i.e. if I swap them, the same thing happens), so the HDDs are good and I think so are the enclosures (two different companies making similar products that failed in an identical fashion would be very unlikely). The top HDD can be used fine every time, I actually tried a speed test from Linux and got about 150MiB/s reads, so all is working as it should; the one below refuses to work every time. So the failure is consistent. To make sure this was not some obscure Linux bug, I tried the same under Windows 7, and the system also only created one drive letter for a drive of 3TB size (so it was only seeing one instead of both). Placing an older, known good, 2TB drive in the top bay made that the one recognised, so we have the same issue under Windows as well. Log entries under Linux (tested here with a 3TB and a 2TB drive so I could differentiate them; either one works in the top enclosure, in the test setup the 3TB one is on top). You can see them being detected, the top one is ok, but for the bottom one only errors: Jul 19 23:28:15 media kernel: [260150.582436] usb 6-1: New USB device found, idVendor=1ca1, idProduct=18ae Jul 19 23:28:15 media kernel: [260150.582440] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jul 19 23:28:15 media kernel: [260150.582442] usb 6-1: Product: Usb Sata Bridge Jul 19 23:28:15 media kernel: [260150.582444] usb 6-1: Manufacturer: SYMWAVE Jul 19 23:28:15 media kernel: [260150.582446] usb 6-1: SerialNumber: 39584B304C4E3441 Jul 19 23:28:15 media kernel: [260150.870412] scsi11 : usb-storage 6-1:1.0 Jul 19 23:28:16 media kernel: [260151.882087] scsi 11:0:0:0: Direct-Access SYMWAVE ST33000651AS CC44 PQ: 0 ANSI: 4 Jul 19 23:28:16 media kernel: [260151.882242] scsi 11:0:0:1: Direct-Access SYMWAVE ST32000641AS CC12 PQ: 0 ANSI: 4 Jul 19 23:28:16 media kernel: [260151.882677] sd 11:0:0:0: Attached scsi generic sg2 type 0 Jul 19 23:28:16 media kernel: [260151.882774] sd 11:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). Jul 19 23:28:16 media kernel: [260151.882857] sd 11:0:0:1: Attached scsi generic sg3 type 0 Jul 19 23:28:16 media kernel: [260151.882893] sd 11:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) Jul 19 23:28:16 media kernel: [260151.883085] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.883582] sd 11:0:0:0: [sdb] Write Protect is off Jul 19 23:28:16 media kernel: [260151.883961] sd 11:0:0:1: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) Jul 19 23:28:16 media kernel: [260151.884145] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.884570] sd 11:0:0:1: [sdc] Write Protect is off Jul 19 23:28:16 media kernel: [260151.884855] sd 11:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). Jul 19 23:28:16 media kernel: [260151.885286] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.885807] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.909595] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.910159] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.910163] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.910167] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.910169] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.910172] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.910182] quiet_error: 2 callbacks suppressed Jul 19 23:28:16 media kernel: [260151.910570] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.911153] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.911156] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.911159] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.911161] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.911164] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.911385] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.911902] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.911905] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.911908] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.911910] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.911913] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.912128] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.912650] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.912653] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.912656] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.912657] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.912660] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.912876] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.913439] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.913442] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.913445] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.913446] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.913449] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.945227] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.945863] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.945866] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.945870] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.945871] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.945875] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 (...) and so on for like 10 seconds until it gives up (...) 3. Question So, my question would be: what is causing this? Am I missing something, should I configure things differently, is this a known limitation? Searching online for more information did not yield any useful results... Thank you in advance for any help!

    Read the article

  • How to automatically remove Flash history/privacy trail? Or stop Flash from storing it?

    - by Arjan van Bentem
    Many people have heard about third-party cookies, and some browsers even block those by default. Some people may even be using Private Browsing modes. However, only few seem to realise that Adobe's Flash player also leaves a cross-browser trail on your local hard drive, and allows for sending cookie-like information back to the server, including third-party sites. And because it is a plugin, Flash does not take any of the browser's privacy settings into account. Sorry for the long post, but first some details about why using Flash raises a privacy concern, followed by the results of my tests: The Flash player keeps a cross-browser history of the domain names of the Flash-sites your computer has visited. Unlike your browser's history, this history is not limited to a certain number of days. History is also recorded while using so-called Private Browsing modes. It is stored on your hard drive (though, as described below, without going to Adobe's site you won't know what is stored). I am not sure if any date and time information is kept about each visit, but to see the domain names: right-click on some Flash content, open the settings dialog, and click the Help icon or click the Advanced button within the Privacy tab. This opens a browser to the help pages on Adobe.com, where one can click through to the Website Storage Settings panel. One can clear the existing list, but one cannot stop it from being recorded again. Flash allows for storing data on your local hard drive, using so-called Local Shared Objects (aka "Flash Cookies"). Just like HTTP cookies, this data can be sent back to the server, for tracking purposes. They are cross-browser, have no expiration date, and no user defined maximum lifetime can be set in the Flash preferences either. These not being HTTP cookies, they are (of course) not blocked by a browser's cookies preferences and are not removed when the normal HTTP cookies are deleted. Adobe has announced that version 10.1 will obey Private Browsing in most popular browsers, but unfortunately no word about also removing the data whenever normal cookies are deleted manually. And its implementation might be confusing: [..] if the browser is in normal browsing mode when the Flash Player instance is created, then that particular instance will forever be in normal browsing mode (private browsing is turned off). Accordingly, toggling private browsing on or off without refreshing the page or closing the private browsing window will not impact Flash Player. Local Shared Objects are not limited to the site you visit, and third-party storage is enabled by default. At the Global Storage Settings panel one can deselect the default Allow third-party Flash content to store data on your computer. Because of the cross-browser and expiration-less nature (and the fact that few people know about it), I feel that the cross-browser third-party Flash Cookies are more dangerous for visitor tracking than third-party normal HTTP cookies. They are even used to restore plain HTTP cookies that the user tried to delete: "All advertisers, websites and networks use cookies for targeted advertising, but cookies are under attack. According to current research they are being erased by 40% of users creating serious problems," says Mookie Tenembaum, founder of United Virtualities. "From simple frequency capping to the more sophisticated behavioral targeting, cookies are an essential part of any online ad campaign. PIE ["Persistent Identification Element"] will give publishers and third-party providers a persistent backup to cookies effectively rendering them unassailable", adds Tenembaum. [..] To justify this tracking mechanism, UV's Tenembaum said, "The user is not proficient enough in technology to know if the cookie is good or bad, or how it works." When selecting None (zero KB) for Specify the amount of disk space that website websites that you haven't yet visited can use to store information on your computer, and checking Never ask again then some sites do not work. However, the same site might work when setting it to None but without selecting Never ask again, and then choose Deny whenever prompted. Both options would result in zero KB of data being allowed, but the behaviour differs. The plugin also provides a Flash Player cache for Adobe-signed files. I guess these files are not an issue. So: how to automatically delete that information? On a Mac, one can find a settings.sol file and a folder for each visited Flash-website in: $HOME/Library/Preferences/Macromedia/Flash Player/macromedia.com/support/flashplayer/sys/ Deleting the settings.sol file and all the folders in sys, removes the trail from the settings panels. However, the actual Local Shared Ojects are elsewhere (see Wikipedia for locations on other operating systems), in a randomly named subfolder of: $HOME/Library/Preferences/Macromedia/Flash Player/#SharedObjects But then: how to remove this automatically? Simply removing the folders and the settings.sol file every now and then (like by using launchd or Windows' Task Scheduler) may interfere with active browsers. Or is it safe to assume that, given the cross-browser nature, the plugin would not care if things are removed while it is active? Only clearing during log-off may not work for those who hibernate all the time. Firefox users can install BetterPrivacy or Objection to delete the Local Shared Objects (for all others browsers as well). I don't know if that also deletes the trail of website domain names. Or: how to stop Flash from storing a history trail? Change of plans: I'm currently testing prohibiting Flash to write to its own sys and #SharedObjects folders. So far, Flash has not tried to restore permissions (though, when deleting the folders, Flash will of course recreate them). I've not encountered any problems but this may take some while to validate, using multiple browsers and sites. I've not yet found a log that reports errors. On a Mac: cd "$HOME/Library/Preferences/Macromedia/Flash Player/macromedia.com/support/flashplayer" rm -r sys/* chmod u-w sys cd "$HOME/Library/Preferences/Macromedia/Flash Player" # preserve the randomly named subfolders (only preserving the latest would suffice; see below) rm -r \#SharedObjects/*/* chmod -R u-w \#SharedObjects I guess the above chmods cannot be achieved on an old Windows system (I'm not sure about XP and Vista?). Though maybe on Windows one could replace the folders sys and #SharedObjects with dummy files with the same names? Anyone? Obviously, keeping Flash from storing those Local Shared Objects for all sites may cause problems. Some test results (Flash 10 on Mac OS X): When blocking the sys folder (even when leaving the #SharedObjects folder writable) then YouTube won't remember your volume settings while viewing multiple videos. Temporarily allowing write access to the blocked folders while visiting trusted sites (to only create folders for domains you like, maybe including references in settings.sol) solves that. This way, for YouTube, Flash could be allowed to write to sys/#s.ytimg.com and #SharedObjects/s.ytimg.com, while Flash could not create new folders for other domains. One may also need to make settings.sol read-only afterwards, or delete it again. When blocking both the sys and #SharedObjects folders, YouTube and Vimeo work fine (though they might not remember any settings). However, Bits on the Run refuses to even show the video player. This is solved by temporarily unblocking the #SharedObjects folder, to allow Flash to create a subfolder with some random name. Within this folder, it would create yet another folder for the current Flash website (content.bitsontherun.com). Removing that website-specific folder, and blocking both #SharedObjects and the randomly named subfolder, still seems to allow Bits on the Run to operate, even though it still cannot write anything to disk. So: the existence of the randomly named subfolder (even when write protected) is important for some sites. When I first found the #SharedObjects folder, it held many subfolders with random names, some created on the very same day. I wonder when Flash decides it wants a new folder, and how it determines (and remembers) that random name. For a moment I considered not blocking write access for sys and #SharedObjects, but explicitly creating read-only folders for well-known third-party tracking domains (like based on a list from, for example, AdBlock Plus). That way, any other domain could still create Local Shared Objects. But the list would be long, and the domains from AdBlock Plus are probably all third-party domains anyway, so disabling Allow third-party Flash content to store data on your computer might have the very same result. Any experience anyone? (Final notes: if the above links to the settings panels do not work in the future, then use the URL that is known to Flash player as a starting point: www.adobe.com/go/settingsmanager. See also "You Deleted Your Cookies? Think Again" at Wired.com -- which uses Flash cookies itself as well... For the very suspicious using Time Machine: you may want to exclude both folders, for each user, and remove the trace that is already on your backup.)

    Read the article

  • How do I exclude directories from my Windows 7 backup?

    - by mattalexx
    I'm setting up a backup for a friend's computer onto his USB drive. I was reading this article about the Windows 7 Backup and Restore feature. Everything looks okay, but for the life of me, I can't figure out how to get to this screen: I need to set up some excluded folders, since the backup media is a little smaller than the home folder. I need to exclude the replaceable 100 GB video directory.

    Read the article

  • Returning row values based on conditional formatting variables

    - by Mike Bodes
    I'm not entirely sure how to properly explain this, but here we go... I'm trying to create a single budgeting document that allows me to manage purchasing and reconciliation for multiple projects. I would like to create separate sheets per project and have purchased items populate on a master sheet. Using conditional formatting, I've set one of the columns to display an item's status (waiting for approval, approved, ordered, received). I would like the contents of an entire row to populate in a new sheet table once the status is set to "Received." The sheet should update descendingly. I can't attach an image because I don't have a 10 reputation.. Any help is greatly appreciated.

    Read the article

  • Is it safe to disable nmi_watchdog?

    - by Rayne
    I'm using RHEL 6 (kernel 2.6.32-131) and I'm trying to start oprofile, but I keep getting an error. My oprofile version is 0.9.6-12. I was able to successfully do opcontrol --init But when I did a opcontrol --start --no-vmlinux I got the error Using default event: CPU_CLK_UNHALTED:100000:0:1:1 Error: counter 0 not available nmi_watchdog using this resource ? Try: opcontrol --deinit echo 0 > /proc/sys/kernel/nmi_watchdog I don't know if it's safe for me to do this? For what I googled, it seems that nmi_watchdog is used to reboot the system if it hangs, and that sounds like something I want. Also, grep NMI /proc/interrupts shows a bunch of numbers, which I guess indicates that nmi_watchdog is already running? How can I run both oprofile and nmi_watchdog?

    Read the article

  • How to recover a file using the FAT cluster chain instead of using the stored length in the FAT table?

    - by cadrian
    I'm trying to recover movie files from my TNT receiver hard drive but it corrupts its FAT32 allocation table (crappy cheap device...) Using dosfsck is useless because the correct file length is the cluster length, not the (shorter) one in the table, and dosfsck only proposes to shorten the file, which I won't do. Question: how to recover a file using the FAT cluster chain instead of using the stored length in the FAT table? Edit I forgot to say: Linux solutions only please (I have no windows box)

    Read the article

  • How to rip dvd and arrange files

    - by user23950
    I'm ripping a dvd with dvd shrink. There are lots of anime episodes on it. And when I open those .vob files it seems that the episodes are not arranged in one .vob file. Because 1 .vob file has multiple episodes but they are not arranged as ep 1, ep 2, ep 3, etc. Is it possible to edit those files so that the episodes would be arranged

    Read the article

  • Website for facilitating interactive discussion ?

    - by shan23
    I had heard of websites that would allow two or more people to share a common text editor, so that changes to the text can be made and simultaneously viewed by all participants in real time - this kind of websites is ostensibly used for conducting interviews online. I know they exist (I had read of them in a tech magazine), but I can't seem to find the right search term for google to throw me a correct link. So, I'm asking you guys, as you might have used it before, or know what I'm talking about.

    Read the article

  • Problem after resizing partition for Fedora under Vmware fusion

    - by user20196
    Hi, I am running FC9 under VMware Fusion 3.0 I wanted to resize my /dev/sda2 partition. In order to do that I did the following: 0. changed the size of the vmware file (under VMware settings). 1. rebooted the host to rescue mode without mounted disks 2. fdisk - removed & added /dev/sda2 - i had bigger /dev/sda2 3. lvm pvresize /dev/sda2 4. lvm pvdisplay - it showed me bigger size on /dev/VolGroup00 for /dev/sda2 5. lvm vgchange -a y - device-mapper: reload ioctl failed: Invalid argument - 2 logical volume(s) in volume group "VolGroup00" now active This is not true because there is no /dev/VolGroup00/LogVol00 My whole "/" disappeared. dmsetup table, shows: VolGroup00-LogVol01: 0 2097152 linear 8:2 38338944 VolGroup00-LogVol00: Can some one help me to solve this? Thank You.

    Read the article

  • PBS batch jobs - the qalter command

    - by Ryan Budney
    I've got a giant computation running on a Scientific Linux cluster. At present I have over 600 jobs parked in the queue, waiting for processor time, while a few are running. I'm trying to use the qalter command on some of the idle but scheduled jobs. I'd like to schedule them for a later time, so that other users can jump part of the queue, sort of as an act of politeness. Is this doable? For example, JOBNAME 292399 is currently idle, scheduled to be run whenever a spot in the queue opens up. But if I run qalter -a 10051000 292398 followed by qrerun 292398 I get qrerun: Request invalid for state of job 292398.euler. From the qalter documentation, I thought 10051000 refers to tomorrow (oct 5th, 10am) but perhaps I'm misunderstanding something? If I'm going about this the wrong way, please let me know. The main thing I'm looking for is a command that's easily scriptable, so that I can modify when my queued tasks get run. qalter seems good for those purposes if I can get it working. I'd rather avoid running qdel and re qsubbing the computations, as there's a bookkeeping issue on which tasks to restart (vs which ones not to). I want to avoid that kind of bookkeeping. From googling around I notice some qalter commands have rather different date formats, but the above appears to be correct, as far as I can tell from the man docs. Any help would be appreciated.

    Read the article

  • Dashboard Devmode w/o "Always on Top" Possible?

    - by Travis
    I am using (and loving) OS X's Dashboard in dev mode ('defaults write com.apple.dashboard devmode YES') which lets you put the widgets on your desktop directly. The only downside is the widgets are "always on top". So all windows end up going under the widgets instead of above. Is there any way to disable this?

    Read the article

  • How to boot Snow Leopard without Rebel EFI?

    - by RahulVyas
    I have Mac OSX 10.5.7 on one hdd and I want to install Snow Leopard 10.6 so I attach another hdd, format it with GUID, and then boot my system using free Rebel EFI disc, then I install the Snow Leopard but in the end the setup fails. When I restart the PC and boot using Rebel EFI it shows Snow Leopard installed. So I boot that in safe mode and it started. My problem is I cannot boot it into safe mode because I have Chameleon already installed for 10.5.7 and in the Chameleon I can not see any option to boot into safe mode? So does someone know how do I boot Snow Leopard?

    Read the article

  • Gnu screen with local scrollback buffer?

    - by Hugh Perkins
    I'm using a remote server over a very slow and unreliable network connection. So, I want to use gnu screen in order not to lose what I'm doing whenever I get disconnected. But I want a local scrollback buffer, on my local computer, so that scrollback doesn't have to go across the network, which is incredibly slow. Is there either something like gnu screen, but with a local scrollback buffer; or else a way of using gnu screen with a local scrollback buffer?

    Read the article

  • 3GB RAM Installed and Detected by BIOS, Windows Vista 32bit Only Sees 2GB

    - by Nathan Taylor
    I am attempting to install more RAM on a Windows Vista 32bit machine which is using a X6DAL-XG motherboard and the RAM amount reported in the BIOS is 3GB+, but Windows is only reporting 2GB installed. The motherboard has 6 RAM bays which I have populated with various combinations of 4 1GB sticks, and 2 512mb sticks, but no matter how I configure them Windows doesn't see more than 2GB. I realize of course 32-bit Windows has a 3gb cap on memory, but that doesn't explain why it will only report 2GB when there are in fact (currently) 5GB installed. I should think I would be able to see at least 3GB. According to the spec list for the motherboard the minimum RAM requirements are DDR333/266mhz installed in pairs. I have done this exactly, and the BIOS isn't reporting any problems at POST. RAM Configuration (according to CPU-Z): Slot #1: Kingston 128mx72D266C25 - 1024mb PC2100 (133mhz) Slot #2: Kingston KVR266X72RC25/1024 - 1024mb PC2100 (133mhz) Slot #3: PQI - 512mb PC2700 (166mhz) Slot #4: Kingston 128mx72D266C25 - 1024mb PC2100 (133mhz) Slot #5: Kingston KVR266X72RC25/1024 - 1024mb PC2100 (133mhz) Slot #6: PQI - 512mb PC2700 (166mhz) I'm not sure if memory specs above conflict with this statement in the motherboard manual or not: Memory Support The X6DAL-XG supports up to 12GB/24GB of registered ECC DDR333/266 (PC2700/PC2100) memory. The motherboard was designed to support 4GB (PC2100) modules in each slot, but only the 2GB modules have been tested. When using registered ECC DDR333 (PC2700) memory, installing four pieces of double-banked memory or six pieces of single-banked memory is supported. So, am I doing something wrong with the RAM I have now, or is there some sort of compatibility problem which I am missing? Thanks!

    Read the article

  • Categorize outgoing mail in outlook

    - by uwe
    Is there a way to easily categorize an outgoing mail in outlook 2007? I can go to options tab and then click "further options" (translated) an then choose the category in the message options dialog. But is there a single click way to to that? I write a lot of mails and I want to categorize outgoing mails fast. Thank you!

    Read the article

  • How can I sort Windows 7 control panel by columns, not rows

    - by user26453
    As best as I can tell the behavior of Windows 7's control panel is as follows: When Large Icons or Small Icons display modes are used, the icons are sorted alphabetically. However they are ordered by row: a b c d e f g h as opposed to what I usually expect in any file browser: a d g b e h c f Why is this the one part of Windows 7 that behaves this way and is there any way to change this behavior?

    Read the article

  • Windows Media Player - Media library is corrupted

    - by Badr
    Error: "Windows Media Player cannot play the file because the required video codec is not installed on your computer." Solution applied: 1- "http://support.microsoft.com/kb/926373" 2- Media Library is CORRUPTED on Windows 7. "http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/media-library-is-corrupted-on-windows-7/2afcac17-984b-48fe-98fa-451aa5c085e6" 3- "Windows Media Player cannot play the file because the required video codec is not installed on your computer " 4- "Windows Media Player cannot play the file because the required video codec is not installed on your computer." 5- "How to Reset Windows Media Player to default settings." And non of them fixed the problem. Windows 7 Professional 64-bit - Windows media player 11. Any other solution to fix it?

    Read the article

< Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >