Search Results

Search found 10406 results on 417 pages for 'device'.

Page 151/417 | < Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >

• Installing ethernet controller driver after clean windows XP install

  - by user1488804

  I've been having trouble getting internet access through an ethernet connection since doing a fresh install of windows XP. It appears that I'm missing the driver for the ethernet controller. Looking in 'device manager' under the network adapters section there's an apparently working '1394 Net Adaptor' but under unknown devices there's the question-marked ethernet controller, which I believe is what I want the driver for. I found an old cd that contains the driver for it (Realtek 8139 or some 81xx). There's no setup tool, but only 3 files (a .cat file, .inf file and .sys file). I've tried right-clicking on the .inf file and using 'install' and also tried just copying the .sys file into the system32/drivers folder but neither have got me anywhere after restarting. The ethernet controller is still listed in 'unknown devices'. EDIT: I've also tried updating the driver in the device manager, pointing it at the folder containing the driver, but this hasn't worked either. Any ideas? Thanks

  Read the article

• Windows 7 Pro x64 suffering from insomnia

  - by gemisigo

  My Win 7 Pro x64 is unable to enter sleep mode. Pressing the sleep button results in strange state where the computer starts entering the sleep mode, the display is turned off but then the whole process stops, it does not switch off the hdd, the keyboard still responds to numlock/capslock, but the display does not on anymore. I have to cut power and restart. If I remove everything (wireless mouse, external hdd, usb hub, etc.) it does enter sleep mode, but if there is something left, it does not, though every one of them has "Allow the computer to turn off this device..." checked and "Allow this device to wake the computer" unchecked. Why does it not work? It was working properly in the RC.

  Read the article

• Audio switch with multiple 3.5mm input & outputs

  - by David Nguyen

  I've been searching for a device that simple allows me to pick one input and one output from multiple input/outputs. I thought this would be a called a switch but I can only find ones with one input. Is there such a device that can do this? I will be attaching various devices, i.e. multiple console sound, PC & Laptop inputs and outputting to my speakers or headphones. I'm looking for something small and simple. All inputs and outputs are 3.5mm.

  Read the article

• Connect Ralink RT2571 to new PC

  - by tuelsch

  I bought a new PC with the AsRock Z77 Extreme 4m motherboard, since this has no WLAN, I extracted the WLAN card from my old PC, a Ralink RT 2571 WF, an connected it to the new board. I downloaded the driver from http://www.ralinktech.com/en/04_support/support.php?sn=500 (the RT257x USB one) and installed it. In the device manager, an unknown device shows up, but if I tell it to search its driver, it does not find it (searching in the whole C partition). The Ralink Diagnostic Test says that the WLAN Card is disabled. I'm using Windows 7 64bit professional. Can anyone suggest me a solution to get my WLAN running?

  Read the article

• kvm process has too large a memory footprint on host

  - by gucki

  I'm using latest ubuntu quantal and start a kvm guest which should have 2048 MB of memory. Now after a few hours I can see that the kvm process of this guest is around 2700 MB, so 700 MB more than the guest should be able to consume. I mean a small overhead like 1% would be ok, but not 30%?! root 8631 74.0 22.2 4767484 2752336 ? Sl Nov07 512:58 kvm -cpu kvm64 -smp sockets=1,cores=2 -cpu kvm64 -m 2048 -device virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa,bootindex=100 -drive file=rbd:data/vm-disk-1,if=none,id=drive-virtio0,cache=writeback,aio=native -device virtio-net-pci,netdev=net0,bus=pci.0,addr=0x12,id=net0,mac=02:7a:86:e6:1a:6c,bootindex=200 -netdev type=tap,id=net0,vhost=on -usbdevice tablet -nodefaults -enable-kvm -daemonize -boot menu=on -vga cirrus root 8694 0.0 0.0 0 0 ? S Nov07 0:00 [kvm-pit/8631] How is this possible and how to prevent it?

  Read the article

• I have a wireless Canon P560 and my computer can't find it

  - by ed

  The printer is wireless and I haven't connected it via USB. I set the configurations for the Wi-Fi access point in the printer and it connected to my Wi-Fi. I have AT&T as the service provider and the 2Wire router. When I access the router in the browser I see that the printer is connected but when I run the software to detect the printer the computer can't find it. I have a Mac with Snow Leopard. I tried to detect the printer with another device and it can't find it. Is there a port that needs to be open for wireless printers? Because I tried putting the routers firewall settings for the device to its lowest and the computer still can't find it. Let me know. Thnx.

  Read the article

• How can I connect a DVI monitor to the VGA port in my laptop?

  - by Corey

  Is there a device I can buy that will convert the analog signal to digital?

  Read the article

• What does directory permission 'S' mean? (not lower case, but in upper case)

  - by Howard Guo

  I downloaded Eclipse, uncompressed it, did a few other things and all sudden I notice this interesting behaviour: ^_^ ~/Downloads > sudo chmod 0000 eclipse/ ^_^ ~/Downloads > stat eclipse/ File: 'eclipse/' Size: 4096 Blocks: 8 IO Block: 4096 directory Device: 801h/2049d Inode: 529725 Links: 9 Access: (2000/d-----S---) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2012-11-22 19:54:57.752017352 +1100 Modify: 2012-09-20 18:16:26.000000000 +1000 Change: 2012-11-22 20:07:49.354016510 +1100 Birth: - ^_^ ~/Downloads > sudo chmod 0755 eclipse/ ^_^ ~/Downloads > stat eclipse/ File: 'eclipse/' Size: 4096 Blocks: 8 IO Block: 4096 directory Device: 801h/2049d Inode: 529725 Links: 9 Access: (2755/drwxr-sr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2012-11-22 19:54:57.752017352 +1100 Modify: 2012-09-20 18:16:26.000000000 +1000 Change: 2012-11-22 20:08:19.042016478 +1100 Birth: - What does 'S' permission mean to a directory? And why it doesn't let me get rid of it? Thanks.

  Read the article

• iPhone game center can't create sandbox account

  - by William Jockusch

  Whenever I try to create an account on the simulator or device, I get a message "game center account services are currently unavailable. Please try again later." Furthermore, I have never been able to sign in to the game center app on the simulator. Interestingly, if I reset my device with iTunes, I can then log in to the Game Center app with my regular apple id. But whenever if I log out, then try to create a sandbox account for an app I am developing, it always fails as described above. Any suggestions?

  Read the article

• DIsable my nv video card driver in linux

  - by Dahaka Wang

  I'm trying to passthrough my nv video card to my domU, but I could not bind my video card to the pciback driver I only have one video card with the pci number 0000:03:00.0, so I used the following command echo -n "0000:03:00.0" > /sys/bus/pci/drivers/nouveau/bind to unbind the nouveau driver from my video card. The screen went black because I have forcefully removed the video driver, therefore I ssh'd into the computer to run further commands I ran: echo -n "0000:03:00.0" > /sys/bus/pci/drivers/pciback/bind to try to bind it to my pciback driver, but I got: bash: echo: write error: No such device I found out that this was the message shown when trying to bind a PCI device which is already bound. Therefore, I think that something was still using my video card Can anyone help me out? Thanks a lot!

  Read the article

• Portable Display doesn't work anymore

  - by RipCord

  My USB portable monitor will not work since I installed the hard drive onto an HP laptop. I have installed all the new hardware drivers and do not have any more device issues in device manager view. My old laptop was a lenovo. The new one is an HP. The system seems to recognize devices that I connect via, usb but the portable display still does not show anything on the screen. It is probably a conflict in the registry but I'm not sure how to find it and the Power User does not have the luxury of letting me troubleshoot for hours to isolate the problem.

  Read the article

• centos 6 nfs: logs not showing anywhere

  - by ancillary

  Can someone please tell me where NFS logs in centos 6? Or perhaps where I can tell NFS to send logs? At the present time, there appears to be no such setting. Trying to get the thing to work without logs is quite frustrating. [root@houston netshare]# locate nfs| grep log [root@houston netshare]# [root@houston netshare]# grep -Rni "nfs" /var/log /var/log/anaconda.storage.log:23:20:41:33,962 DEBUG : registered device format class NFS as nfs /var/log/anaconda.storage.log:24:20:41:33,962 DEBUG : registered device format class NFSv4 as nfs4 This is a day-old centos 6 install from livecd and yum update has been run.

  Read the article

• Create and copy a Windows Mobile 5.0 operating system image

  - by user20119

  We have several dozen Windows Mobile 5.0 devices (Symbol MC7095 handhelds equipped with embedded Verizon WLAN, if that matters) that all need the same software and configuration. We connect all of these devices via a USB cradle to add software to them via Microsoft ActiveSync, and then do several configuration changes directly on the handhelds themselves, in the OS. That process takes 30 minutes or more, per device. Is there any way to set up one device and take a 'disk image' of the entire OS/software, such that things could then be copied (quickly/easily) to the other devices? Is such a thing possible, with Windows Mobile devices?

  Read the article

• Installing OpenVPN on Windows7

  - by Darcara

  It seems I cannot install the current version of OpenVPN (2.1.2) because the TAP driver is not signed and therefore windows 7 x64 refuses to install it. It shows up in the device manager, but with a yellow exclamation mark. It's a fresh system, and OpenVPN was never installed before. When I start the OpenVPN client it seems to connect fine, but then it stops with CreateFile failed on TAP device: ... All TAP-Win32 adapters on this system are currently in use. How can I install the unsigned drivers, or are there signed drivers available somewhere ?

  Read the article

• Prevent Windows 7 from unpluging External HDD [migrated]

  - by marverix

  I have installed Windows 7 as my media server. I pluged in 500GB external HDD via USB. I have changed power plan to Best Performance and changed advenced power settings to never turn off HDD etc. I even yesterday wrote powershell script (create and delete folder on this disk) and I have added it to harmonogram to run every 5 minutes starting from system boot. And nothing! Disk after some time (I realy can't say when) is turning off and Windows show "Unknown Device" in Device Manager. Then only system reboot or disk reboot helps. Any ideas how to prevent Windows 7 from stopping my external HDD? Cheers!

  Read the article

• External Hard Disk's secter could not be read ?

  - by mgpyone

  I've an 500 GB Seagate External Hard Disk (NTFS) . Currently, I can't open it at Windows. Thus, I've tired with chkdsk command .. but still it stopped and can't continue checking disk.. Also I've tired with fsck on Mac . Then, it shows me the Error .. /Volumes/<HD Name>/ is not a character device CONTINUE? yes /Volumes/<HD Name>/ (NO WRITE) CANNOT READ: BLK 16 CONTINUE? yes THE FOLLOWING DISK SECTORS COULD NOT BE READ: 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, ioctl (GCINFO): Inappropriate ioctl for device fsck: /Volumes/<HD Name>/: can't read disk label The volume I've used is around 300 GB , Thus, it's hard to back up and format again . Thus, any helpful suggestions and solutions will be appreciated pretty well.

  Read the article

• Windows backups to VM Esxi

  - by Martyn

  I'm very new to ESXi, so apologies if this is a silly question. I have ESXi 5.1 running running on HP Proliant Microserver with internal LUNs RAIDed with HP P410 Smart Array card. I have 2 Windows Server 2012 VMs running as Domain controllers. These are being backed-up up with GhettoVCB to a dedicated datastore hosted on LUNs on a eSata external device. I have several Windows 8 & 7 PC's connected to this domain. I want to back up these Windows PCs, via the built in backup software, ideally to the external eSata device as well. What do I need to do to have the Windows PC's see the datastore? I assume I could create a VM for FreeNas or something, or share out the datastore via one of the Windows Server 2012 VMs. Both those options seem a little bit of an over kill?

  Read the article

• Installing grub2 on ubutntu with software raid mirroring

  - by Marko

  Hi guys, Can someone help me out on this? I accidentally installed grub on usb flash drive during ubuntu server installation. Now I cant boot system without drive attached to server. I want to install grub on hard drive with grub-install but i don't know what to set as location for boot loader? my fstab looks like this: file system mount point type options dump pass proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/pdc_jdbeghhjg1 / ext4 errors=remount-ro 0 1 /dev/mapper/pdc_jdbeghhjg5 none swap sw 0 0 and partition tables for hard drives as this: Device Boot Start End Blocks Id System /dev/sda1 2048 1215662079 607830016 83 Linux /dev/sda2 1215664126 1249998847 17167361 5 Extended /dev/sda5 1215664128 1249998847 17167360 82 Linux swap / Solaris Device Boot Start End Blocks Id System /dev/sdb1 1 75672 607830016 83 Linux /dev/sdb2 75672 77809 17167361 5 Extended /dev/sdb5 75672 77809 17167360 82 Linux swap / Solaris ?

  Read the article

• Bringing the xenbr0 interface up on XEN under Ubuntu 8.04

  - by iyl

  I installed XEN on Ubuntu 8.04 using this tutorial: http://www.howtoforge.com/ubuntu-8.04-server-install-xen-from-ubuntu-repositories but after I reboot with the XEN kernel, I don't have xenbr0 device. I see that network-bridge script runs and it creates peth0 device, but not xenbr0. I have a very basic IP setup, with a single static IP defined in /etc/network/interfaces. The only unusual thing is that my hosting (1&1) gave me a netmask 255.255.255.255, so I had to add the default gateway with this script: /sbin/route add -host 10.255.255.1 dev eth0 /sbin/route add default gw 10.255.255.1 Everything else is plain vanilla Ubuntu 8.04.

  Read the article

• Sennheiser PC360 Microphone Suddenly Stopped Working

  - by Michaelwm

  Just recently, my Sennheiser PC360's microphone stopped working. Yesterday Night, it was working 100% fine. Muting correctly, un-muting, volume boosting, etc. I woke up this morning, and got into a skype call (After not changing a single setting on my computer), and it wasn't working. I tried mumble, and it didn't work there either. After that, I checked my sound devices and found out it was plugged in, but not responding to my voice. I unplugged the headset, and it correctly showed that it was unplugged. So, a quick run-down: Sennheiser PC360 Headset suddenly stops working after a few hours of sleep. Software is up to date I can hear the mute sound when I raise and lower the microphone arm Windows Sound Device Manager shows that it is plugged in Unplugging the headset correctly shows it is unplugged Windows Sound Device Manager shows that the microphone isn't receiving any input

  Read the article

• Slot load DVD burner options for standard desktop case

  - by Michael Kohne

  I need a new DVD burner (internal) for my father-in-law's computer. He's apparently broken the current one - he forgot to push the tray back in after doing something and hit it with his chair. Given this, I'd like to get him a slot-loading DVD burner, so as to avoid the problem entirely. I need an internal device, and I'll be mounting in a 5 1/4" bay. He doesn't need any super-spec device - as long as it can read/write all the standard formats, it's good. I see a few options at newegg.com, but they all have mixed reviews. Are there any out there that are generally seen as reliable? How does one go about mounting slimline devices in a standard 5 1/4" bay? Is there a standard faceplate kit for that?

  Read the article

• Hylafax with serial over IP modem

  - by zero_r

  I'm looking into virtualizing a Hylafax server which currently runs on a dedicated hardware running CentOS with a Divalogic card. The main issue obviously is, how to connect the modem to the VM. There are serial over IP devices available at digi.com. Maybe there are others? Regarding digi.com devices, as far as I understood one can install the RealPort software and then have a /dev/ttySx device presented to the Linux server. This device then can be used as serial connection to the modem. Does someone have such a configuration in place? Or does someone have another idea to virtualize a Hylafax server (outbound faxes only). Thank you in advance

  Read the article

• Get OpenVPN clients names to resolve through dnsmasq

  - by Fake Name

  I have a PFSense box running as an OpenVPN server. There are several remote devices that connect through the VPN (as tap devices). The VPN stuff is working, I can access the remote hardware by looking up the IP assigned to each device on the PFSense router. What I'd like is to have it so I can resolve the remote hardware addresses via DNS while on the local network. Note that this is only local-network - remote-device (they're backup boxes). I don't need to have the remote devices resolve using the local DNS forwarding agent. I have the rest of the devices on the network that need to be accessible via DNS report their name during the DHCP process. However, the IP assignment for OpenVPN tap clients, while it is dynamic (which is why I need DNS), does not seem to use the local DHCP server. How can I have my openvpn server add information for it's clients to the dnsmask resolver? Is this setup even reasonable (I'm not familiar with openVPN at all)?

  Read the article

• Live Mesh beta on Windows 7 - Did anybody get it working?

  - by Andrew J. Brehm

  I have Live Mesh beta installed on 64 bit Windows 7 but cannot connect to the computer remotely. The "Manage devices" page gives this information: This device is synchronizing but cannot be remotely accessed. Check the Live Mesh notifier on the device to see if Live Mesh remote desktop enhancements need to be installed. However, I cannot find instructions on how to use the "notifier" to "see" if Live Mesh remote desktop enhancements are installed or how I could install them. When I originally installed (both times) Mesh I did tell it to install "remote desktop enhancements". Does this just not work with Windows 7 and/or 64 bit?

  Read the article

• Clarification of the difference between PCI memory addressing and I/O addressing?

  - by KevinM

  Could someone please clarify the difference between memory and I/O addresses on the PCI/PCIe bus? I understand that I/O addresses are 32-bit, limited to the range 0 to 4GB, and do not map onto system memory (RAM), and that memory addresses are either 32-bit or 64-bit. I get the impression that memory addressing must map onto available RAM, is this true? That if a PCI device wishes to transfer data to a memory address, that address must exist in actual system RAM (and is allocated during PCI configuration) and not virtual memory. So if a PCI device only needs to transfer a small amount of data at a time, where there is no advantage to putting it into RAM or using DMA, then I/O addressing is fine (e.g. a parallel port implemented on a PCI card). And why do I keep reading that PCI/PCIe I/O addressing is being deprecated in favour of memory addressing? Thanks!

  Read the article

< Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >