Search Results

Search found 5716 results on 229 pages for 'dual channel'.

Page 151/229 | < Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >

• Boxee on Dell 32in TV causes headaches, how to troubleshoot?

  - by brown145

  I have revamped an old pc, installing 4GB ram and a 256MB video card so that I could run Boxee to a Dell W3200 series TV that came with my apartment. It is connected via VGA, resolution is 1360x768, 24bit color, 60Htz refresh rate. Unfortunately, every time I use it I end up with a headache after less that 30 min. I have had my eyes check recently, and am able to play xbox (connected via hdmi) on the same TV without problems. What are the potential causes? My system seems to well meet or exceed the min requirements for boxee, XP, AMD Atholon 64 X2 Dual Core, 4GB RAM. Could it be the VGA cable? What is the most cost effective way to trouble shoot?

  Read the article

• How do I get a 300Mbps connection over 802.11n?

  - by Daniel Schaffer

  I just bought a new wireless setup, consisting of a Cisco E2000 router, Edimax 7718un USB adapter for my laptop and an Edimax 7728in PCI adapter for my HTPC (which isn't in a location I can run cat5 to). I have to stay in the 2.4GHz band because I have an iPhone and a Wii that will need to connect. I'm aware that 11g devices will drop speeds for 11n devices, but they aren't connected yet. The fastest connection I've been able to get, with the router within 5 feet of either the laptop or HTPC is 144Mbps. The router has settings for "20MHz" and "Auto (20 MHz or 40Mhz) channel width, which I've set to the "Auto" setting. I haven't been able to find anything similar for either of the Edimax adapters. This is the first I've dealt with 11n, so I'm not even sure what else could be causing a problem. How do I get up to 300Mbps, or at least a fair bit closer?

  Read the article

• Install ubuntu on MacBook Pro

  - by n179911

  Hi, Can you please tell me what is the preferred way to install Ubuntu on MacBook Pro? I have a MacBook Pro with MacOSX 10.5. I need a Linux environment some times. So what is the best way to achieve that? 1. Make it dual boot? (but I don't know if that is possible with MacBook) 2. Install Virtual Box and then put Ununtu on top of it? (But I am not sure if this configuration will be slow, so I need a Linux environment for coding, so it needs to do compiling and debugging and stuff). Thank you for any tips.

  Read the article

• Headphones stopped working in Windows (working fine in other OS)

  - by arnab321

  All of a sudden, my headphones stopped working with windows 8 in my laptop. Sound plays fine through built in speakers. Its not a problem with the hardware, because, I dual boot ubuntu and sound plays fine in Ubuntu. These are the things I have tried: - Restarting and blah blah. Restarted 20 times i think, alternating windows and ubuntu. - Uninstalled and reinstalled Realtek drivers. - Troubleshooting from control panel (it says "coudnt identify problem") What might be the problem?

  Read the article

• ideal memory configuration 4 bank, ddr3, AM3+ FX - 1 vs 2 vs 4 dimms?

  - by TardisGuy

  Ok, so ive been looking around, trying to learn and understand the way that ram works. Ive gotten one answer that said "The addressing is best for 2 sticks, and when you use 4; it slows down" Another answer said something like: Theres bank/channel interleave that makes the memory read like one stick Also I read something about the memory density also being a factor. I dug further and found out that theres a higher speed limit on my board for 2 sticks vs 4, so now im trying to put an image in my head of how and why, and... pfft. Can anyone explain, or recommend a resource that would answer these questions?

  Read the article

• Windows Server 2008 R2 Maximum Processor Limit Confusion

  - by Stevoni

  As I was looking through the Windows Server 2008 R2 specifications, I saw that the maximum supported processors is 64 sockets for Datacenter addition. This puts the maximum number or cores at 256 (if all sockets are quad cores), which I think it's just silly, but whatever. And now the questions: How does one set something like that up? (Obviously not for me, but humor me) Are there multiple dual socket motherboards running in a giant case with a ton of memory? How does the OS see all of the CPUs if they're on different boards? What would be a real world example of a need to have 64 sockets attached to one operating system vs 32 2 socket servers?

  Read the article

• Webcam on Sony Vaio on Win 7 problem

  - by Norm

  Anyone know where I can get a Win 7 32Bit driver for my Web Cam (Vaio VGN-CR11H/B) ? I changed operating system from Chinese Vista to English Win 7 Update: Windows 7 will not detect the cam, but I just read the Sony Europe site and it gives me some ideas to try. I can dual boot this Sony laptop: with Chinese Vista, the camera works but IE8 does not work. I cannot read Chinese to fix the Internet access issue, but I can get the computer online and Skype works. When I boot with the new Win 7, IE 8 works great, but the cam doesn't work (mic and speakers work). Very perplexing problem.

  Read the article

• Why can't I install Ubuntu 10.04 on a system that already has Ubuntu 8.04?

  - by Android Eve

  Ubuntu 10.04 is beautiful. I love it. I am dying to install it on my PC, alongside the existing Ubuntu 8.04 (from which I write this message right now). But... it won't let me! When I reach the partitioning stage (manual!) Ubuntu 10.04 sees my two HDDs as one RAID volume. It doesn't see all the partitions I already have in place in /dev/sda and /dev/sdb. Even Windows 7 doesn't behave like this... (yes, I actually managed to install Windows 7 64-bit in dual-boot configuration with Ubuntu 8.04 on this same system). Note: GParted on Ubuntu 10.04 (live CD) sees the partition intended for Ubuntu 10.04 (/dev/sda4) perfectly, but is unable to format it. Any idea how to solve this problem?

  Read the article

• Make GRUB 2 boot Windows 8 safe mode

  - by Tim

  I have a dual boot configuration: Windows 8 Consumer and Ubuntu 11.10. I tried to install the Asus drivers for my motherboard (P8Z68-V LE EFI) in windows 8, and i now get bluescreens when starting windows. Holding F8 or Shift-F8 doesn't seem to be working, so is there another way to get into Safe Mode, or uninstall the errant driver? I need to get into Safe Mode in windows to fix the issue. Things I have tried: Disabling overclock Holding F8 or Shift+F8 How can i get GRUB 2 to boot windows 8 in safe mode? Or is there another way to disable a driver that is making it impossible to boot?

  Read the article

• Can I ping via an arbitrary interface of a DD-WRT system? [migrated]

  - by bytebuster

  There's a Linksys WRT54GL router with DD-WRT firmware (v23SP2). The network has a simple dual-WAN configuration (standby mode, switching by a script): ~ # ip route 192.168.3.0/24 dev br0 proto kernel scope link src 192.168.3.1 192.168.2.0/24 dev vlan2 proto kernel scope link src 192.168.2.2 192.168.1.0/24 dev vlan1 proto kernel scope link src 192.168.1.67 127.0.0.0/8 dev lo scope link default via 192.168.2.1 dev vlan2 I'm trying to ping a certain server arbitrary via vlan1 or vlan2. What I tried, as suggested here: ping -I vlan2 <address> ping 192.168.2.1 <address> In both cases ping simply exits with no error messages. Also, ping ignores many other parameters, again, by exiting silently. I failed to find any references that DD-WRT has a limited version of ping whatsoever. I also don't think it can be a permissions issue as mentioned here since the only user with DD-WRT is root. What's wrong?

  Read the article

• Second Monitor "Input Not Supported"

  - by Drew

  I have two identical monitors (new Acer s211hl) with a native resolution of 1920x1080. When enabling dual monitor support in Windows 7, the primary monitor works as expected, but the second monitor says, "Input not Supported" and fails to display anything. If I change the resolution of the second monitor to 1440x900, it works as expected. Likewise, if I set it to 1920x1080 with a refresh rate of 30hz, the monitor displays video. However, neither of these are solutions, because the output looks very blurry, and the content is stretched. I am using the following hardware: Monitors: Acer s211hl Motherboard: Asus F1A75M-Pro CPU/GPU: AMD A8-3850 with integrated Radeon HD 6550D graphics I suspect that there is probably an issue with the integrated graphics or motherboard not being able to output to two 1920x1080 monitors, but I am hoping for official confirmation.

  Read the article

• How to understand cpu family/model/stepping fields in /proc/cpuinfo [closed]

  - by Victor Sorokin

  I have following in cpuinfo: processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 107 model name : AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping : 2 According to Wikipedia page there are two kinds of 5600+ -- one of 90nm technology, another of 65nm. How can I understand which one I have? There seem to be no direct correspondence between contents of cpuinfo and info on Wikipedia page. AMD site seems to use some other naming scheme for processors too. How can I map values of family, model and stepping from cpuinfo to the data available on Wikipedia/AMD?

  Read the article

• Uncorrectable machine check

  - by GregC

  I am experiencing rare but real unrecoverable machine checks on HP DL370 G6 dual-core Xeon server. I ran memtest86+ before, and ran CPU-intensive operations without any problems. In your opinion, does this indicate a real problem, or is it normal and expected behavior? How would you approach this problem? EDIT after some troubleshooting, it seems that these machine checks, as well as problems when showing device manager can be traced back to NC375i NICs. All is well when the NICs are not in the server. Further improvements to stability of HP Gen6 with Intel Xeon have been brought in with BIOS update in September 2013 HP Update DVD. Intel's newer microcode makes these CPUs much more stable. We haven't seen hardware-related BSODs since the update in September.

  Read the article

• What firewall ports do I need to open when using FTPS?

  - by anoopm

  I need to access an ftps server (vsftpd) on a vendor's site. The vendor has a firewall in front of the ftps server and I have a firewall in front of my ftps client. I understand that ports 990, 991 and maybe 989 need to be opened up for control traffic. When looking at it from the vendor's firewall perspective, should these ports be opened up for both inbound and outbound traffic? What about ports for the DATA channel? Do I have to open all ports above 1000? And should I do it for both inbound and outbound traffic? TIA for your help.

  Read the article

• IIS6 can't find site on local network

  - by chezy525

  I have a windows 2003 server with dual NICs running IIS6. I can access everything remotely, but the internal network can't seem to find the site regardless of which IP Address I try to go to. There are really several weird things that are happening here, but I'm going to limit this question to what I'm guessing to be the simplest problem (the solution to which I'm hoping solves other things as well): From the server itself, I can access the webpage using the primary IP address (i.e. http://192.168.1.2/index.htm), but not using the secondary IP address (i.e. http://10.10.10.2/index.htm). Self pinging both IP addresses works, and the "Web site identification" in IIS has the IP address set to "(All Unassigned)"... which I believe should bind both IP addresses to this site. I apologize if I'm not providing enough details about my setup, but at this point I don't even know what's relevant...

  Read the article

• How can I tell if my live web-server is overloaded?

  - by Nick G

  We have a live webserver which doesn't seem to be performing all that well. It's a Dell PowerEdge machine, a few years old (dual core, 4GB) which is hosting about 20 low-traffic websites. However it doesn't seem to be as fast as it used to be. How can we determine the cause of this? If it's website traffic, I would be expecting high CPU but CPU usage is quite low and hovers around the 15-30% mark except for very brief periods. I'm wondering perhaps, if rather than CPU performance being a problem, perhaps it's disk thrashing due to the constant read/writes of all the small web files and database queries. It has 4x 7200 RPM SATA drives in RAID 5. So is there a way to check that it's not disk thrashing?

  Read the article

• Wireless performance on Ubuntu 9.10

  - by Brian

  Is there something I should do to my networking configuration in Ubuntu to better the performance of my wireless connection? I'm on a netbook dual-booting Windows 7 and Ubuntu 9.10. I pick up much stronger wifi signal when in Windows than Ubuntu. As soon as I boot Ubuntu, it will connect to the network with a stronger signal, and then loses signal very quickly. After it dies, I can't reconnect. I've tested this on a couple of different networks with the same outcome.

  Read the article

• Why are PNG-8 files mangled when opened in Photoshop?

  - by Daniel Beardsley

  Why are some 32 bit PNGs opened in Photoshop with Indexed Colors and no transparency? For instance, I grabbed a png icon file of the Stack Overflow logo at: http://blog.stackoverflow.com/wp-content/uploads/icon-so.png When opening it in Photoshop CS3, it apparently treats it as indexed color and gets rid of the alpha channel. The image on the right is a screen grab of the icon. Changing the Image mode in Photoshop to RGB doesn't change the image at all. I've tried this with a few other PNGs and it seems hit or miss. When viewed in other programs, it displays fine. left:png opened in Photoshop, right:screen grab of png from browser What gives?, does Photoshop not interpret the PNG file format correctly?

  Read the article

• Windows 7 Install command prompt can't access the C drive

  - by theouteredge

  I'm trying to create a new Windows 7 Professional VHD which I can dual boot to, following Scott Hanselman's guide to creating a bootable VHD. When I get to the command prompt in the Windows 7 installation and try to create a VHD or select/attach a pre-created VHD file I get an error saying that diskpart can't find the path specified. If I try and switch to the c drive using cd c: I see c:\ x:\something\> I already have a Windows 7 Ultimate install and my C drive is an SSD – if that makes a difference.

  Read the article

• Nagios: Is it possible to have multiple IPs for a host?

  - by Aknosis

  In our office we have dual WAN setup, if our cable connection drops we still get connectivity via our T1. The only issue is that our office network is no longer available on the same IP so all Nagios check go critical because they can't connect. What'd be awesome is if I could have Nagios try IP 1 by default but if for some reason its failing on that IP try IP 2. I doubt this is possible with a default install but I'm wondering if there is any add-ons or some other magic that could make this work?

  Read the article

• Restoring Dell recovery disks while preserving Linux partition

  - by Flup

  I have a Dell laptop dual-booting to Windows 7 and Linux. I have through my own stupidity royally stuffed the Windows partition. I have the set of recovery DVDs that I created when I first got the laptop, and I've successfully booted from them in a VirtualBox VM and ended up with a fresh (albeit virtualised) installation of Windows 7. When I started the recovery process, there was mention of other partitions being preserved, but it was unclear as to whether non-NTFS partitions would survive the process. The question is: can I run the recovery procedure without risking my Linux partition?

  Read the article

• Swappable hard-drives for laptop

  - by lacqui

  I am bringing my old laptop for recycling, and removed my hard drive beforehand. The drive is a 320GB SATA drive, which is the same as my current laptop's drive. I would like to be able to easily swap between the two drives, in order to dual-boot that way. My laptop (Toshiba Satellite A500) needs a tiny Philip's screwdriver to get at the hard drive bay. I would like to replace that with something that is more easily changed, while still allowing the hard drive to rest on the desk. It can stick out a bit due to the laptop's feet, but not too far.

  Read the article

• MacBook repeatedly disconnects from WiFi

  - by redwall_hp

  I have an early 2008-model MacBook (2.4GHz). The WiFi router I have at home is a Linksys WRT54GX2 that I have had for a few years. My MacBook has recently started disconnecting from the router every few minutes, which is rather annoying. I can reconnect again without having to restart the router or anything, as it seems that the MacBook is just dropping the connection. I have tried changing the channel on the router, and upgrading the laptop from Leopard to Snow Leopard made no difference either. I'm only about six feet from the linksys device, so distance isn't an issue. This only happens with the Linksys router, while I can use the local library's open network without issue. The problem also seemingly becomes more pronounced after midnight. Any ideas as to what the problem could be?

  Read the article

• Windows 7 Boot Loader - Remove 30 second waiting time

  - by derekhh

  I've installed Fedora 17 and Windows 7 on two different hard disks as a dual-boot system. The default boot loader is GRUB 2 maintained and configured in Fedora 17. When I startup and choose "Windows 7 bootloader (on /dev/sda1)" in GRUB 2, Windows 7 boot loader will appear, with only Windows 7 as the only choice and also the default operating system, with a 30 second waiting time if no input is detected. I'm trying to see if it is possible to remove this 30-second waiting time. I've tried to follow the instructions on the Web by configuring default operating system in the control panel but seems there is something wrong with it. I've also tried to use "bcdedit enum /all" but still receives error prompts. Update: Added my boot tab screen in msconfig.

  Read the article

• Windows 2008 Server on VMWare (hardware)

  - by Bill

  I want to setup a single server to run a few virtual servers for our datacenter. I do not have a lot of money to spend so I am trying to gain bang for the buck. My budget is around $2,000. So I was thinking about building the following as the VMWare physical server: Intel iCore 7 950 (LGA1366, 4 cores,8 threads) Gigabyte GA-X58-USB3 LGA 1366 X58 ATX Intel Motherboard 24 GB of Viper II Series, Sector 7 Edition, Extreme Performance DDR3-1600 (PC3-12800) CL9 Triple Channel Memory VelociRaptor 300GB 10,000 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive I am planning on running the newest version of VMWare ESXi (64-bit). On these I am planning on running a few various servers: Windows 2008 Server R2 w/ IIS (several custom built ASP.NET Apps) Windows 2008 Server R2 w/ MS SQL 2008 Database Server Linux Web Server w/ Several WordPress Blogs (XAMPP?) Windows 2008 Server R2 w/ IIS (DEV ENVIRONMENT) Windows 2008 Server R2 w/ MS SQL 2008 Database Server (DEV ENVIRONMENT) In your opinion, will this hardware be sufficient to run the above load with room for possible 2-3 more virtual machines (probably lightweight web servers)?

  Read the article

< Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >